summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/infiniband/hw/ipath/ipath_driver.c128
-rw-r--r--drivers/infiniband/hw/ipath/ipath_file_ops.c72
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba7220.c21
-rw-r--r--drivers/infiniband/hw/ipath/ipath_init_chip.c95
-rw-r--r--drivers/infiniband/hw/ipath/ipath_intr.c82
-rw-r--r--drivers/infiniband/hw/ipath/ipath_kernel.h8
-rw-r--r--drivers/infiniband/hw/ipath/ipath_ruc.c7
-rw-r--r--drivers/infiniband/hw/ipath/ipath_sdma.c13
8 files changed, 224 insertions, 202 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index f81dd4acdc60..2036d38fac47 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1428,6 +1428,40 @@ static void ipath_update_pio_bufs(struct ipath_devdata *dd)
spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
}
+/*
+ * used to force update of pioavailshadow if we can't get a pio buffer.
+ * Needed primarily due to exitting freeze mode after recovering
+ * from errors. Done lazily, because it's safer (known to not
+ * be writing pio buffers).
+ */
+static void ipath_reset_availshadow(struct ipath_devdata *dd)
+{
+ int i, im;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (i = 0; i < dd->ipath_pioavregs; i++) {
+ u64 val, oldval;
+ /* deal with 6110 chip bug on high register #s */
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
+ val = le64_to_cpu(dd->ipath_pioavailregs_dma[im]);
+ /*
+ * busy out the buffers not in the kernel avail list,
+ * without changing the generation bits.
+ */
+ oldval = dd->ipath_pioavailshadow[i];
+ dd->ipath_pioavailshadow[i] = val |
+ ((~dd->ipath_pioavailkernel[i] <<
+ INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT) &
+ 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */
+ if (oldval != dd->ipath_pioavailshadow[i])
+ ipath_dbg("shadow[%d] was %Lx, now %lx\n",
+ i, oldval, dd->ipath_pioavailshadow[i]);
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+}
+
/**
* ipath_setrcvhdrsize - set the receive header size
* @dd: the infinipath device
@@ -1482,9 +1516,12 @@ static noinline void no_pio_bufs(struct ipath_devdata *dd)
*/
ipath_stats.sps_nopiobufs++;
if (!(++dd->ipath_consec_nopiobuf % 100000)) {
- ipath_dbg("%u pio sends with no bufavail; dmacopy: "
- "%llx %llx %llx %llx; shadow: %lx %lx %lx %lx\n",
+ ipath_force_pio_avail_update(dd); /* at start */
+ ipath_dbg("%u tries no piobufavail ts%lx; dmacopy: "
+ "%llx %llx %llx %llx\n"
+ "ipath shadow: %lx %lx %lx %lx\n",
dd->ipath_consec_nopiobuf,
+ (unsigned long)get_cycles(),
(unsigned long long) le64_to_cpu(dma[0]),
(unsigned long long) le64_to_cpu(dma[1]),
(unsigned long long) le64_to_cpu(dma[2]),
@@ -1496,14 +1533,17 @@ static noinline void no_pio_bufs(struct ipath_devdata *dd)
*/
if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
(sizeof(shadow[0]) * 4 * 4))
- ipath_dbg("2nd group: dmacopy: %llx %llx "
- "%llx %llx; shadow: %lx %lx %lx %lx\n",
+ ipath_dbg("2nd group: dmacopy: "
+ "%llx %llx %llx %llx\n"
+ "ipath shadow: %lx %lx %lx %lx\n",
(unsigned long long)le64_to_cpu(dma[4]),
(unsigned long long)le64_to_cpu(dma[5]),
(unsigned long long)le64_to_cpu(dma[6]),
(unsigned long long)le64_to_cpu(dma[7]),
- shadow[4], shadow[5], shadow[6],
- shadow[7]);
+ shadow[4], shadow[5], shadow[6], shadow[7]);
+
+ /* at end, so update likely happened */
+ ipath_reset_availshadow(dd);
}
}
@@ -1652,19 +1692,46 @@ void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
unsigned len, int avail)
{
unsigned long flags;
- unsigned end;
+ unsigned end, cnt = 0, next;
/* There are two bits per send buffer (busy and generation) */
start *= 2;
- len *= 2;
- end = start + len;
+ end = start + len * 2;
- /* Set or clear the generation bits. */
spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ /* Set or clear the busy bit in the shadow. */
while (start < end) {
if (avail) {
- __clear_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
- dd->ipath_pioavailshadow);
+ unsigned long dma;
+ int i, im;
+ /*
+ * the BUSY bit will never be set, because we disarm
+ * the user buffers before we hand them back to the
+ * kernel. We do have to make sure the generation
+ * bit is set correctly in shadow, since it could
+ * have changed many times while allocated to user.
+ * We can't use the bitmap functions on the full
+ * dma array because it is always little-endian, so
+ * we have to flip to host-order first.
+ * BITS_PER_LONG is slightly wrong, since it's
+ * always 64 bits per register in chip...
+ * We only work on 64 bit kernels, so that's OK.
+ */
+ /* deal with 6110 chip bug on high register #s */
+ i = start / BITS_PER_LONG;
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
+ __clear_bit(INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ dma = (unsigned long) le64_to_cpu(
+ dd->ipath_pioavailregs_dma[im]);
+ if (test_bit((INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start) % BITS_PER_LONG, &dma))
+ __set_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ else
+ __clear_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start, dd->ipath_pioavailshadow);
__set_bit(start, dd->ipath_pioavailkernel);
} else {
__set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
@@ -1673,7 +1740,44 @@ void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
}
start += 2;
}
+
+ if (dd->ipath_pioupd_thresh) {
+ end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+ next = find_first_bit(dd->ipath_pioavailkernel, end);
+ while (next < end) {
+ cnt++;
+ next = find_next_bit(dd->ipath_pioavailkernel, end,
+ next + 1);
+ }
+ }
spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+
+ /*
+ * When moving buffers from kernel to user, if number assigned to
+ * the user is less than the pio update threshold, and threshold
+ * is supported (cnt was computed > 0), drop the update threshold
+ * so we update at least once per allocated number of buffers.
+ * In any case, if the kernel buffers are less than the threshold,
+ * drop the threshold. We don't bother increasing it, having once
+ * decreased it, since it would typically just cycle back and forth.
+ * If we don't decrease below buffers in use, we can wait a long
+ * time for an update, until some other context uses PIO buffers.
+ */
+ if (!avail && len < cnt)
+ cnt = len;
+ if (cnt < dd->ipath_pioupd_thresh) {
+ dd->ipath_pioupd_thresh = cnt;
+ ipath_dbg("Decreased pio update threshold to %u\n",
+ dd->ipath_pioupd_thresh);
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
+ << INFINIPATH_S_UPDTHRESH_SHIFT);
+ dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
+ << INFINIPATH_S_UPDTHRESH_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
}
/**
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 8b1752202e78..3295177c937e 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -173,47 +173,25 @@ static int ipath_get_base_info(struct file *fp,
(void *) dd->ipath_statusp -
(void *) dd->ipath_pioavailregs_dma;
if (!shared) {
- kinfo->spi_piocnt = dd->ipath_pbufsport;
+ kinfo->spi_piocnt = pd->port_piocnt;
kinfo->spi_piobufbase = (u64) pd->port_piobufs;
kinfo->__spi_uregbase = (u64) dd->ipath_uregbase +
dd->ipath_ureg_align * pd->port_port;
} else if (master) {
- kinfo->spi_piocnt = (dd->ipath_pbufsport / subport_cnt) +
- (dd->ipath_pbufsport % subport_cnt);
+ kinfo->spi_piocnt = (pd->port_piocnt / subport_cnt) +
+ (pd->port_piocnt % subport_cnt);
/* Master's PIO buffers are after all the slave's */
kinfo->spi_piobufbase = (u64) pd->port_piobufs +
dd->ipath_palign *
- (dd->ipath_pbufsport - kinfo->spi_piocnt);
+ (pd->port_piocnt - kinfo->spi_piocnt);
} else {
unsigned slave = subport_fp(fp) - 1;
- kinfo->spi_piocnt = dd->ipath_pbufsport / subport_cnt;
+ kinfo->spi_piocnt = pd->port_piocnt / subport_cnt;
kinfo->spi_piobufbase = (u64) pd->port_piobufs +
dd->ipath_palign * kinfo->spi_piocnt * slave;
}
- /*
- * Set the PIO avail update threshold to no larger
- * than the number of buffers per process. Note that
- * we decrease it here, but won't ever increase it.
- */
- if (dd->ipath_pioupd_thresh &&
- kinfo->spi_piocnt < dd->ipath_pioupd_thresh) {
- unsigned long flags;
-
- dd->ipath_pioupd_thresh = kinfo->spi_piocnt;
- ipath_dbg("Decreased pio update threshold to %u\n",
- dd->ipath_pioupd_thresh);
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
- << INFINIPATH_S_UPDTHRESH_SHIFT);
- dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
- << INFINIPATH_S_UPDTHRESH_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
-
if (shared) {
kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase +
dd->ipath_ureg_align * pd->port_port;
@@ -1309,19 +1287,19 @@ static int ipath_mmap(struct file *fp, struct vm_area_struct *vma)
ureg = dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port;
if (!pd->port_subport_cnt) {
/* port is not shared */
- piocnt = dd->ipath_pbufsport;
+ piocnt = pd->port_piocnt;
piobufs = pd->port_piobufs;
} else if (!subport_fp(fp)) {
/* caller is the master */
- piocnt = (dd->ipath_pbufsport / pd->port_subport_cnt) +
- (dd->ipath_pbufsport % pd->port_subport_cnt);
+ piocnt = (pd->port_piocnt / pd->port_subport_cnt) +
+ (pd->port_piocnt % pd->port_subport_cnt);
piobufs = pd->port_piobufs +
- dd->ipath_palign * (dd->ipath_pbufsport - piocnt);
+ dd->ipath_palign * (pd->port_piocnt - piocnt);
} else {
unsigned slave = subport_fp(fp) - 1;
/* caller is a slave */
- piocnt = dd->ipath_pbufsport / pd->port_subport_cnt;
+ piocnt = pd->port_piocnt / pd->port_subport_cnt;
piobufs = pd->port_piobufs + dd->ipath_palign * piocnt * slave;
}
@@ -1633,9 +1611,6 @@ static int try_alloc_port(struct ipath_devdata *dd, int port,
port_fp(fp) = pd;
pd->port_pid = current->pid;
strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
- ipath_chg_pioavailkernel(dd,
- dd->ipath_pbufsport * (pd->port_port - 1),
- dd->ipath_pbufsport, 0);
ipath_stats.sps_ports++;
ret = 0;
} else
@@ -1938,11 +1913,25 @@ static int ipath_do_user_init(struct file *fp,
/* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
+ /* some ports may get extra buffers, calculate that here */
+ if (pd->port_port <= dd->ipath_ports_extrabuf)
+ pd->port_piocnt = dd->ipath_pbufsport + 1;
+ else
+ pd->port_piocnt = dd->ipath_pbufsport;
+
/* for right now, kernel piobufs are at end, so port 1 is at 0 */
+ if (pd->port_port <= dd->ipath_ports_extrabuf)
+ pd->port_pio_base = (dd->ipath_pbufsport + 1)
+ * (pd->port_port - 1);
+ else
+ pd->port_pio_base = dd->ipath_ports_extrabuf +
+ dd->ipath_pbufsport * (pd->port_port - 1);
pd->port_piobufs = dd->ipath_piobufbase +
- dd->ipath_pbufsport * (pd->port_port - 1) * dd->ipath_palign;
- ipath_cdbg(VERBOSE, "Set base of piobufs for port %u to 0x%x\n",
- pd->port_port, pd->port_piobufs);
+ pd->port_pio_base * dd->ipath_palign;
+ ipath_cdbg(VERBOSE, "piobuf base for port %u is 0x%x, piocnt %u,"
+ " first pio %u\n", pd->port_port, pd->port_piobufs,
+ pd->port_piocnt, pd->port_pio_base);
+ ipath_chg_pioavailkernel(dd, pd->port_pio_base, pd->port_piocnt, 0);
/*
* Now allocate the rcvhdr Q and eager TIDs; skip the TID
@@ -2107,7 +2096,6 @@ static int ipath_close(struct inode *in, struct file *fp)
}
if (dd->ipath_kregbase) {
- int i;
/* atomically clear receive enable port and intr avail. */
clear_bit(dd->ipath_r_portenable_shift + port,
&dd->ipath_rcvctrl);
@@ -2136,9 +2124,9 @@ static int ipath_close(struct inode *in, struct file *fp)
ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
pd->port_port, dd->ipath_dummy_hdrq_phys);
- i = dd->ipath_pbufsport * (port - 1);
- ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport);
- ipath_chg_pioavailkernel(dd, i, dd->ipath_pbufsport, 1);
+ ipath_disarm_piobufs(dd, pd->port_pio_base, pd->port_piocnt);
+ ipath_chg_pioavailkernel(dd, pd->port_pio_base,
+ pd->port_piocnt, 1);
dd->ipath_f_clear_tids(dd, pd->port_port);
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index 5f693de66542..8eee7830f042 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -595,7 +595,7 @@ static void ipath_7220_txe_recover(struct ipath_devdata *dd)
dev_info(&dd->pcidev->dev,
"Recovering from TXE PIO parity error\n");
- ipath_disarm_senderrbufs(dd, 1);
+ ipath_disarm_senderrbufs(dd);
}
@@ -675,10 +675,8 @@ static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg,
ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
/*
- * Parity errors in send memory are recoverable,
- * just cancel the send (if indicated in * sendbuffererror),
- * count the occurrence, unfreeze (if no other handled
- * hardware error bits are set), and continue.
+ * Parity errors in send memory are recoverable by h/w
+ * just do housekeeping, exit freeze mode and continue.
*/
if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
@@ -687,13 +685,6 @@ static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg,
hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
<< INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
- if (!hwerrs) {
- /* else leave in freeze mode */
- ipath_write_kreg(dd,
- dd->ipath_kregs->kr_control,
- dd->ipath_control);
- goto bail;
- }
}
if (hwerrs) {
/*
@@ -723,8 +714,8 @@ static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg,
*dd->ipath_statusp |= IPATH_STATUS_HWERROR;
dd->ipath_flags &= ~IPATH_INITTED;
} else {
- ipath_dbg("Clearing freezemode on ignored hardware "
- "error\n");
+ ipath_dbg("Clearing freezemode on ignored or "
+ "recovered hardware error\n");
ipath_clear_freeze(dd);
}
}
@@ -1967,7 +1958,7 @@ static void ipath_7220_config_ports(struct ipath_devdata *dd, ushort cfgports)
dd->ipath_rcvctrl);
dd->ipath_p0_rcvegrcnt = 2048; /* always */
if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- dd->ipath_pioreserved = 1; /* reserve a buffer */
+ dd->ipath_pioreserved = 3; /* kpiobufs used for PIO */
}
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 27dd89476660..3e5baa43fc82 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -41,7 +41,7 @@
/*
* min buffers we want to have per port, after driver
*/
-#define IPATH_MIN_USER_PORT_BUFCNT 8
+#define IPATH_MIN_USER_PORT_BUFCNT 7
/*
* Number of ports we are configured to use (to allow for more pio
@@ -54,13 +54,9 @@ MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
/*
* Number of buffers reserved for driver (verbs and layered drivers.)
- * Reserved at end of buffer list. Initialized based on
- * number of PIO buffers if not set via module interface.
+ * Initialized based on number of PIO buffers if not set via module interface.
* The problem with this is that it's global, but we'll use different
- * numbers for different chip types. So the default value is not
- * very useful. I've redefined it for the 1.3 release so that it's
- * zero unless set by the user to something else, in which case we
- * try to respect it.
+ * numbers for different chip types.
*/
static ushort ipath_kpiobufs;
@@ -546,9 +542,12 @@ static void enable_chip(struct ipath_devdata *dd, int reinit)
pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
else
pioavail = dd->ipath_pioavailregs_dma[i];
- dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail) |
- (~dd->ipath_pioavailkernel[i] <<
- INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT);
+ /*
+ * don't need to worry about ipath_pioavailkernel here
+ * because we will call ipath_chg_pioavailkernel() later
+ * in initialization, to busy out buffers as needed
+ */
+ dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail);
}
/* can get counters, stats, etc. */
dd->ipath_flags |= IPATH_PRESENT;
@@ -708,12 +707,11 @@ static void verify_interrupt(unsigned long opaque)
int ipath_init_chip(struct ipath_devdata *dd, int reinit)
{
int ret = 0;
- u32 val32, kpiobufs;
+ u32 kpiobufs, defkbufs;
u32 piobufs, uports;
u64 val;
struct ipath_portdata *pd;
gfp_t gfp_flags = GFP_USER | __GFP_COMP;
- unsigned long flags;
ret = init_housekeeping(dd, reinit);
if (ret)
@@ -753,56 +751,46 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
/ (sizeof(u64) * BITS_PER_BYTE / 2);
uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
- if (ipath_kpiobufs == 0) {
- /* not set by user (this is default) */
- if (piobufs > 144)
- kpiobufs = 32;
- else
- kpiobufs = 16;
- }
+ if (piobufs > 144)
+ defkbufs = 32 + dd->ipath_pioreserved;
else
- kpiobufs = ipath_kpiobufs;
+ defkbufs = 16 + dd->ipath_pioreserved;
- if (kpiobufs + (uports * IPATH_MIN_USER_PORT_BUFCNT) > piobufs) {
+ if (ipath_kpiobufs && (ipath_kpiobufs +
+ (uports * IPATH_MIN_USER_PORT_BUFCNT)) > piobufs) {
int i = (int) piobufs -
(int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
if (i < 1)
i = 1;
dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
"%d for kernel leaves too few for %d user ports "
- "(%d each); using %u\n", kpiobufs,
+ "(%d each); using %u\n", ipath_kpiobufs,
piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
/*
* shouldn't change ipath_kpiobufs, because could be
* different for different devices...
*/
kpiobufs = i;
- }
+ } else if (ipath_kpiobufs)
+ kpiobufs = ipath_kpiobufs;
+ else
+ kpiobufs = defkbufs;
dd->ipath_lastport_piobuf = piobufs - kpiobufs;
dd->ipath_pbufsport =
uports ? dd->ipath_lastport_piobuf / uports : 0;
- val32 = dd->ipath_lastport_piobuf - (dd->ipath_pbufsport * uports);
- if (val32 > 0) {
- ipath_dbg("allocating %u pbufs/port leaves %u unused, "
- "add to kernel\n", dd->ipath_pbufsport, val32);
- dd->ipath_lastport_piobuf -= val32;
- kpiobufs += val32;
- ipath_dbg("%u pbufs/port leaves %u unused, add to kernel\n",
- dd->ipath_pbufsport, val32);
- }
+ /* if not an even divisor, some user ports get extra buffers */
+ dd->ipath_ports_extrabuf = dd->ipath_lastport_piobuf -
+ (dd->ipath_pbufsport * uports);
+ if (dd->ipath_ports_extrabuf)
+ ipath_dbg("%u pbufs/port leaves some unused, add 1 buffer to "
+ "ports <= %u\n", dd->ipath_pbufsport,
+ dd->ipath_ports_extrabuf);
dd->ipath_lastpioindex = 0;
dd->ipath_lastpioindexl = dd->ipath_piobcnt2k;
- ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
+ /* ipath_pioavailshadow initialized earlier */
ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
"each for %u user ports\n", kpiobufs,
piobufs, dd->ipath_pbufsport, uports);
- if (dd->ipath_pioupd_thresh) {
- if (dd->ipath_pbufsport < dd->ipath_pioupd_thresh)
- dd->ipath_pioupd_thresh = dd->ipath_pbufsport;
- if (kpiobufs < dd->ipath_pioupd_thresh)
- dd->ipath_pioupd_thresh = kpiobufs;
- }
-
ret = dd->ipath_f_early_init(dd);
if (ret) {
ipath_dev_err(dd, "Early initialization failure\n");
@@ -810,13 +798,6 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
}
/*
- * Cancel any possible active sends from early driver load.
- * Follows early_init because some chips have to initialize
- * PIO buffers in early_init to avoid false parity errors.
- */
- ipath_cancel_sends(dd, 0);
-
- /*
* Early_init sets rcvhdrentsize and rcvhdrsize, so this must be
* done after early_init.
*/
@@ -836,6 +817,7 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
dd->ipath_pioavailregs_phys);
+
/*
* this is to detect s/w errors, which the h/w works around by
* ignoring the low 6 bits of address, if it wasn't aligned.
@@ -862,12 +844,6 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
/*
* before error clears, since we expect serdes pll errors during
* this, the first time after reset
@@ -940,6 +916,19 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
else
enable_chip(dd, reinit);
+ /* after enable_chip, so pioavailshadow setup */
+ ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
+
+ /*
+ * Cancel any possible active sends from early driver load.
+ * Follows early_init because some chips have to initialize
+ * PIO buffers in early_init to avoid false parity errors.
+ * After enable and ipath_chg_pioavailkernel so we can safely
+ * enable pioavail updates and PIOENABLE; packets are now
+ * ready to go out.
+ */
+ ipath_cancel_sends(dd, 1);
+
if (!reinit) {
/*
* Used when we close a port, for DMA already in flight
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 45c4c068ab1e..26900b3b7a4e 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -38,42 +38,12 @@
#include "ipath_verbs.h"
#include "ipath_common.h"
-/*
- * clear (write) a pio buffer, to clear a parity error. This routine
- * should only be called when in freeze mode, and the buffer should be
- * canceled afterwards.
- */
-static void ipath_clrpiobuf(struct ipath_devdata *dd, u32 pnum)
-{
- u32 __iomem *pbuf;
- u32 dwcnt; /* dword count to write */
- if (pnum < dd->ipath_piobcnt2k) {
- pbuf = (u32 __iomem *) (dd->ipath_pio2kbase + pnum *
- dd->ipath_palign);
- dwcnt = dd->ipath_piosize2k >> 2;
- }
- else {
- pbuf = (u32 __iomem *) (dd->ipath_pio4kbase +
- (pnum - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
- dwcnt = dd->ipath_piosize4k >> 2;
- }
- dev_info(&dd->pcidev->dev,
- "Rewrite PIO buffer %u, to recover from parity error\n",
- pnum);
-
- /* no flush required, since already in freeze */
- writel(dwcnt + 1, pbuf);
- while (--dwcnt)
- writel(0, pbuf++);
-}
/*
* Called when we might have an error that is specific to a particular
* PIO buffer, and may need to cancel that buffer, so it can be re-used.
- * If rewrite is true, and bits are set in the sendbufferror registers,
- * we'll write to the buffer, for error recovery on parity errors.
*/
-void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite)
+void ipath_disarm_senderrbufs(struct ipath_devdata *dd)
{
u32 piobcnt;
unsigned long sbuf[4];
@@ -109,11 +79,8 @@ void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite)
}
for (i = 0; i < piobcnt; i++)
- if (test_bit(i, sbuf)) {
- if (rewrite)
- ipath_clrpiobuf(dd, i);
+ if (test_bit(i, sbuf))
ipath_disarm_piobufs(dd, i, 1);
- }
/* ignore armlaunch errs for a bit */
dd->ipath_lastcancel = jiffies+3;
}
@@ -164,7 +131,7 @@ static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
{
u64 ignore_this_time = 0;
- ipath_disarm_senderrbufs(dd, 0);
+ ipath_disarm_senderrbufs(dd);
if ((errs & E_SUM_LINK_PKTERRS) &&
!(dd->ipath_flags & IPATH_LINKACTIVE)) {
/*
@@ -909,8 +876,8 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
* processes (causing armlaunch), send errors due to going into freeze mode,
* etc., and try to avoid causing extra interrupts while doing so.
* Forcibly update the in-memory pioavail register copies after cleanup
- * because the chip won't do it for anything changing while in freeze mode
- * (we don't want to wait for the next pio buffer state change).
+ * because the chip won't do it while in freeze mode (the register values
+ * themselves are kept correct).
* Make sure that we don't lose any important interrupts by using the chip
* feature that says that writing 0 to a bit in *clear that is set in
* *status will cause an interrupt to be generated again (if allowed by
@@ -918,48 +885,23 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
*/
void ipath_clear_freeze(struct ipath_devdata *dd)
{
- int i, im;
- u64 val;
-
/* disable error interrupts, to avoid confusion */
ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL);
/* also disable interrupts; errormask is sometimes overwriten */
ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
- /*
- * clear all sends, because they have may been
- * completed by usercode while in freeze mode, and
- * therefore would not be sent, and eventually
- * might cause the process to run out of bufs
- */
ipath_cancel_sends(dd, 1);
+
+ /* clear the freeze, and be sure chip saw it */
ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
dd->ipath_control);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- /*
- * ensure pio avail updates continue (because the update
- * won't have happened from cancel_sends because we were
- * still in freeze
- */
+ /* force in-memory update now we are out of freeze */
ipath_force_pio_avail_update(dd);
/*
- * We just enabled pioavailupdate, so dma copy is almost certainly
- * not yet right, so read the registers directly. Similar to init
- */
- for (i = 0; i < dd->ipath_pioavregs; i++) {
- /* deal with 6110 chip bug */
- im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
- i ^ 1 : i;
- val = ipath_read_kreg64(dd, (0x1000 / sizeof(u64)) + im);
- dd->ipath_pioavailregs_dma[i] = cpu_to_le64(val);
- dd->ipath_pioavailshadow[i] = val |
- (~dd->ipath_pioavailkernel[i] <<
- INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT);
- }
-
- /*
* force new interrupt if any hwerr, error or interrupt bits are
* still set, and clear "safe" send packet errors related to freeze
* and cancelling sends. Re-enable error interrupts before possible
@@ -1316,10 +1258,8 @@ irqreturn_t ipath_intr(int irq, void *data)
ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA))
- handle_layer_pioavail(dd);
- else
- ipath_dbg("unexpected BUFAVAIL intr\n");
+ /* always process; sdma verbs uses PIO for acks and VL15 */
+ handle_layer_pioavail(dd);
}
ret = IRQ_HANDLED;
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 202337ae90dc..02b24a340599 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -117,6 +117,10 @@ struct ipath_portdata {
u16 port_subport_cnt;
/* non-zero if port is being shared. */
u16 port_subport_id;
+ /* number of pio bufs for this port (all procs, if shared) */
+ u32 port_piocnt;
+ /* first pio buffer for this port */
+ u32 port_pio_base;
/* chip offset of PIO buffers for this port */
u32 port_piobufs;
/* how many alloc_pages() chunks in port_rcvegrbuf_pages */
@@ -384,6 +388,8 @@ struct ipath_devdata {
u32 ipath_lastrpkts;
/* pio bufs allocated per port */
u32 ipath_pbufsport;
+ /* if remainder on bufs/port, ports < extrabuf get 1 extra */
+ u32 ipath_ports_extrabuf;
u32 ipath_pioupd_thresh; /* update threshold, some chips */
/*
* number of ports configured as max; zero is set to number chip
@@ -1011,7 +1017,7 @@ void ipath_get_eeprom_info(struct ipath_devdata *);
int ipath_update_eeprom_log(struct ipath_devdata *dd);
void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr);
u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
-void ipath_disarm_senderrbufs(struct ipath_devdata *, int);
+void ipath_disarm_senderrbufs(struct ipath_devdata *);
void ipath_force_pio_avail_update(struct ipath_devdata *);
void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev);
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index 8ac5c1d82ccd..9e3fe61cbd08 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -481,9 +481,10 @@ done:
wake_up(&qp->wait);
}
-static void want_buffer(struct ipath_devdata *dd)
+static void want_buffer(struct ipath_devdata *dd, struct ipath_qp *qp)
{
- if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA)) {
+ if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA) ||
+ qp->ibqp.qp_type == IB_QPT_SMI) {
unsigned long flags;
spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
@@ -519,7 +520,7 @@ static void ipath_no_bufs_available(struct ipath_qp *qp,
spin_lock_irqsave(&dev->pending_lock, flags);
list_add_tail(&qp->piowait, &dev->piowait);
spin_unlock_irqrestore(&dev->pending_lock, flags);
- want_buffer(dev->dd);
+ want_buffer(dev->dd, qp);
dev->n_piowait++;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
index 1974df7a9f78..0d07682c7310 100644
--- a/drivers/infiniband/hw/ipath/ipath_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -449,16 +449,19 @@ int setup_sdma(struct ipath_devdata *dd)
ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr,
dd->ipath_sdma_head_phys);
- /* Reserve all the former "kernel" piobufs */
- n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - dd->ipath_pioreserved;
- for (i = dd->ipath_lastport_piobuf; i < n; ++i) {
+ /*
+ * Reserve all the former "kernel" piobufs, using high number range
+ * so we get as many 4K buffers as possible
+ */
+ n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ i = dd->ipath_lastport_piobuf + dd->ipath_pioreserved;
+ ipath_chg_pioavailkernel(dd, i, n - i , 0);
+ for (; i < n; ++i) {
unsigned word = i / 64;
unsigned bit = i & 63;
BUG_ON(word >= 3);
senddmabufmask[word] |= 1ULL << bit;
}
- ipath_chg_pioavailkernel(dd, dd->ipath_lastport_piobuf,
- n - dd->ipath_lastport_piobuf, 0);
ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0,
senddmabufmask[0]);
ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1,
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-20 11:08:28 +0000