diff options
53 files changed, 1884 insertions, 577 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 9a70c31619ea..6be17c2c5c65 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -253,6 +253,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset +What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -612,6 +613,8 @@ Description: a given event type is enabled a future point (and not those for whatever event was previously enabled). +What: /sys/.../events/in_accel_thresh_rising_value +What: /sys/.../events/in_accel_thresh_falling_value What: /sys/.../events/in_accel_x_raw_thresh_rising_value What: /sys/.../events/in_accel_x_raw_thresh_falling_value What: /sys/.../events/in_accel_y_raw_thresh_rising_value @@ -661,6 +664,24 @@ Description: value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes). +What: /sys/.../events/in_accel_scale +What: /sys/.../events/in_accel_peak_scale +What: /sys/.../events/in_anglvel_scale +What: /sys/.../events/in_magn_scale +What: /sys/.../events/in_rot_from_north_magnetic_scale +What: /sys/.../events/in_rot_from_north_true_scale +What: /sys/.../events/in_voltage_scale +What: /sys/.../events/in_voltage_supply_scale +What: /sys/.../events/in_temp_scale +What: /sys/.../events/in_illuminance_scale +What: /sys/.../events/in_proximity_scale +KernelVersion: 3.21 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the conversion factor from the standard units + to device specific units used to set the event trigger + threshold. + What: /sys/.../events/in_accel_x_thresh_rising_hysteresis What: /sys/.../events/in_accel_x_thresh_falling_hysteresis What: /sys/.../events/in_accel_x_thresh_either_hysteresis @@ -997,6 +1018,7 @@ What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en What: /sys/.../iio:deviceX/scan_elements/in_pressure_en What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en +What: /sys/.../iio:deviceX/scan_elements/in_proximity_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -1013,6 +1035,7 @@ What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type What: /sys/.../iio:deviceX/scan_elements/in_pressure_type What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type +What: /sys/.../iio:deviceX/scan_elements/in_proximity_type KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -1064,6 +1087,7 @@ What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index What: /sys/.../iio:deviceX/scan_elements/in_pressure_index What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index +What: /sys/.../iio:deviceX/scan_elements/in_proximity_index KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt new file mode 100644 index 000000000000..b85184391b78 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt @@ -0,0 +1,30 @@ +* Microchip Analog to Digital Converter (ADC) + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in + + Documentation/devicetree/bindings/spi/spi-bus.txt + +must be specified. + +Required properties: + - compatible: Must be one of the following, depending on the + model: + "mcp3001" + "mcp3002" + "mcp3004" + "mcp3008" + "mcp3201" + "mcp3202" + "mcp3204" + "mcp3208" + + +Examples: +spi_controller { + mcp3x0x@0 { + compatible = "mcp3002"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt new file mode 100644 index 000000000000..333139cc0bfb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt @@ -0,0 +1,17 @@ +* Microchip mcp3422/3/4/6/7/8 chip family (ADC) + +Required properties: + - compatible: Should be + "microchip,mcp3422" or + "microchip,mcp3423" or + "microchip,mcp3424" or + "microchip,mcp3426" or + "microchip,mcp3427" or + "microchip,mcp3428" + - reg: I2C address for the device + +Example: +adc@0 { + compatible = "microchip,mcp3424"; + reg = <0x68>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt new file mode 100644 index 000000000000..42ca7deec97d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt @@ -0,0 +1,18 @@ +* Texas Instruments' ADC128S052 ADC chip + +Required properties: + - compatible: Should be "ti,adc128s052" + - reg: spi chip select number for the device + - vref-supply: The regulator supply for ADC reference voltage + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "ti,adc128s052"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; +}; diff --git a/MAINTAINERS b/MAINTAINERS index ccf1c898afb1..036284f6cf45 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4947,6 +4947,7 @@ S: Maintained F: drivers/iio/ F: drivers/staging/iio/ F: include/linux/iio/ +F: tools/iio/ IKANOS/ADI EAGLE ADSL USB DRIVER M: Matthieu Castet <castet.matthieu@free.fr> diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index 066d0c04072c..f1b80c4c0b35 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -147,10 +147,37 @@ struct bmc150_accel_chip_info { const struct bmc150_scale_info scale_table[4]; }; +struct bmc150_accel_interrupt { + const struct bmc150_accel_interrupt_info *info; + atomic_t users; +}; + +struct bmc150_accel_trigger { + struct bmc150_accel_data *data; + struct iio_trigger *indio_trig; + int (*setup)(struct bmc150_accel_trigger *t, bool state); + int intr; + bool enabled; +}; + +enum bmc150_accel_interrupt_id { + BMC150_ACCEL_INT_DATA_READY, + BMC150_ACCEL_INT_ANY_MOTION, + BMC150_ACCEL_INT_WATERMARK, + BMC150_ACCEL_INTERRUPTS, +}; + +enum bmc150_accel_trigger_id { + BMC150_ACCEL_TRIGGER_DATA_READY, + BMC150_ACCEL_TRIGGER_ANY_MOTION, + BMC150_ACCEL_TRIGGERS, +}; + struct bmc150_accel_data { struct i2c_client *client; - struct iio_trigger *dready_trig; - struct iio_trigger *motion_trig; + struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS]; + atomic_t active_intr; + struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS]; struct mutex mutex; s16 buffer[8]; u8 bw_bits; @@ -158,8 +185,6 @@ struct bmc150_accel_data { u32 slope_thres; u32 range; int ev_enable_state; - bool dready_trigger_on; - bool motion_trigger_on; int64_t timestamp; const struct bmc150_accel_chip_info *chip_info; }; @@ -269,6 +294,46 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, return -EINVAL; } +static int bmc150_accel_update_slope(struct bmc150_accel_data *data) +{ + int ret, val; + + ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_6, + data->slope_thres); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_6\n"); + return ret; + } + + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_5\n"); + return ret; + } + + val = (ret & ~BMC150_ACCEL_SLOPE_DUR_MASK) | data->slope_dur; + ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_5, + val); + if (ret < 0) { + dev_err(&data->client->dev, "Error write reg_int_5\n"); + return ret; + } + + dev_dbg(&data->client->dev, "%s: %x %x\n", __func__, data->slope_thres, + data->slope_dur); + + return ret; +} + +static int bmc150_accel_any_motion_setup(struct bmc150_accel_trigger *t, + bool state) +{ + if (state) + return bmc150_accel_update_slope(t->data); + + return 0; +} + static int bmc150_accel_chip_init(struct bmc150_accel_data *data) { int ret; @@ -307,32 +372,12 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) data->range = BMC150_ACCEL_DEF_RANGE_4G; - /* Set default slope duration */ - ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5); - if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_int_5\n"); - return ret; - } - data->slope_dur |= BMC150_ACCEL_DEF_SLOPE_DURATION; - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_5, - data->slope_dur); - if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_5\n"); - return ret; - } - dev_dbg(&data->client->dev, "slope_dur %x\n", data->slope_dur); - - /* Set default slope thresholds */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_6, - BMC150_ACCEL_DEF_SLOPE_THRESHOLD); - if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_6\n"); - return ret; - } + /* Set default slope duration and thresholds */ data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD; - dev_dbg(&data->client->dev, "slope_thres %x\n", data->slope_thres); + data->slope_dur = BMC150_ACCEL_DEF_SLOPE_DURATION; + ret = bmc150_accel_update_slope(data); + if (ret < 0) + return ret; /* Set default as latched interrupts */ ret = i2c_smbus_write_byte_data(data->client, @@ -348,155 +393,6 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) return 0; } -static int bmc150_accel_setup_any_motion_interrupt( - struct bmc150_accel_data *data, - bool status) -{ - int ret; - - /* Enable/Disable INT1 mapping */ - ret = i2c_smbus_read_byte_data(data->client, - BMC150_ACCEL_REG_INT_MAP_0); - if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_int_map_0\n"); - return ret; - } - if (status) - ret |= BMC150_ACCEL_INT_MAP_0_BIT_SLOPE; - else - ret &= ~BMC150_ACCEL_INT_MAP_0_BIT_SLOPE; - - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_MAP_0, - ret); - if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_map_0\n"); - return ret; - } - - if (status) { - /* Set slope duration (no of samples) */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_5, - data->slope_dur); - if (ret < 0) { - dev_err(&data->client->dev, "Error write reg_int_5\n"); - return ret; - } - - /* Set slope thresholds */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_6, - data->slope_thres); - if (ret < 0) { - dev_err(&data->client->dev, "Error write reg_int_6\n"); - return ret; - } - - /* - * New data interrupt is always non-latched, - * which will have higher priority, so no need - * to set latched mode, we will be flooded anyway with INTR - */ - if (!data->dready_trigger_on) { - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_RST_LATCH, - BMC150_ACCEL_INT_MODE_LATCH_INT | - BMC150_ACCEL_INT_MODE_LATCH_RESET); - if (ret < 0) { - dev_err(&data->client->dev, - "Error writing reg_int_rst_latch\n"); - return ret; - } - } - - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_EN_0, - BMC150_ACCEL_INT_EN_BIT_SLP_X | - BMC150_ACCEL_INT_EN_BIT_SLP_Y | - BMC150_ACCEL_INT_EN_BIT_SLP_Z); - } else - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_EN_0, - 0); - - if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_en_0\n"); - return ret; - } - - return 0; -} - -static int bmc150_accel_setup_new_data_interrupt(struct bmc150_accel_data *data, - bool status) -{ - int ret; - - /* Enable/Disable INT1 mapping */ - ret = i2c_smbus_read_byte_data(data->client, - BMC150_ACCEL_REG_INT_MAP_1); - if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_int_map_1\n"); - return ret; - } - if (status) - ret |= BMC150_ACCEL_INT_MAP_1_BIT_DATA; - else - ret &= ~BMC150_ACCEL_INT_MAP_1_BIT_DATA; - - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_MAP_1, - ret); - if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_map_1\n"); - return ret; - } - - if (status) { - /* - * Set non latched mode interrupt and clear any latched - * interrupt - */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_RST_LATCH, - BMC150_ACCEL_INT_MODE_NON_LATCH_INT | - BMC150_ACCEL_INT_MODE_LATCH_RESET); - if (ret < 0) { - dev_err(&data->client->dev, - "Error writing reg_int_rst_latch\n"); - return ret; - } - - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_EN_1, - BMC150_ACCEL_INT_EN_BIT_DATA_EN); - - } else { - /* Restore default interrupt mode */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_RST_LATCH, - BMC150_ACCEL_INT_MODE_LATCH_INT | - BMC150_ACCEL_INT_MODE_LATCH_RESET); - if (ret < 0) { - dev_err(&data->client->dev, - "Error writing reg_int_rst_latch\n"); - return ret; - } - - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_EN_1, - 0); - } - - if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_en_1\n"); - return ret; - } - - return 0; -} - static int bmc150_accel_get_bw(struct bmc150_accel_data *data, int *val, int *val2) { @@ -554,6 +450,114 @@ static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) } #endif +static const struct bmc150_accel_interrupt_info { + u8 map_reg; + u8 map_bitmask; + u8 en_reg; + u8 en_bitmask; +} bmc150_accel_interrupts[BMC150_ACCEL_INTERRUPTS] = { + { /* data ready interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_1, + .map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_DATA, + .en_reg = BMC150_ACCEL_REG_INT_EN_1, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_DATA_EN, + }, + { /* motion interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_0, + .map_bitmask = BMC150_ACCEL_INT_MAP_0_BIT_SLOPE, + .en_reg = BMC150_ACCEL_REG_INT_EN_0, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_SLP_X | + BMC150_ACCEL_INT_EN_BIT_SLP_Y | + BMC150_ACCEL_INT_EN_BIT_SLP_Z + }, +}; + +static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev, + struct bmc150_accel_data *data) +{ + int i; + + for (i = 0; i < BMC150_ACCEL_INTERRUPTS; i++) + data->interrupts[i].info = &bmc150_accel_interrupts[i]; +} + +static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, + bool state) +{ + struct bmc150_accel_interrupt *intr = &data->interrupts[i]; + const struct bmc150_accel_interrupt_info *info = intr->info; + int ret; + + if (state) { + if (atomic_inc_return(&intr->users) > 1) + return 0; + } else { + if (atomic_dec_return(&intr->users) > 0) + return 0; + } + + /* + * We will expect the enable and disable to do operation in + * in reverse order. This will happen here anyway as our + * resume operation uses sync mode runtime pm calls, the + * suspend operation will be delayed by autosuspend delay + * So the disable operation will still happen in reverse of + * enable operation. When runtime pm is disabled the mode + * is always on so sequence doesn't matter + */ + ret = bmc150_accel_set_power_state(data, state); + if (ret < 0) + return ret; + + /* map the interrupt to the appropriate pins */ + ret = i2c_smbus_read_byte_data(data->client, info->map_reg); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_map\n"); + goto out_fix_power_state; + } + if (state) + ret |= info->map_bitmask; + else + ret &= ~info->map_bitmask; + + ret = i2c_smbus_write_byte_data(data->client, info->map_reg, + ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_map\n"); + goto out_fix_power_state; + } + + /* enable/disable the interrupt */ + ret = i2c_smbus_read_byte_data(data->client, info->en_reg); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_en\n"); + goto out_fix_power_state; + } + + if (state) + ret |= info->en_bitmask; + else + ret &= ~info->en_bitmask; + + ret = i2c_smbus_write_byte_data(data->client, info->en_reg, ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_en\n"); + goto out_fix_power_state; + } + + if (state) + atomic_inc(&data->active_intr); + else + atomic_dec(&data->active_intr); + + return 0; + +out_fix_power_state: + bmc150_accel_set_power_state(data, false); + return ret; +} + + static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) { int ret, i; @@ -732,7 +736,7 @@ static int bmc150_accel_read_event(struct iio_dev *indio_dev, *val = data->slope_thres; break; case IIO_EV_INFO_PERIOD: - *val = data->slope_dur & BMC150_ACCEL_SLOPE_DUR_MASK; + *val = data->slope_dur; break; default: return -EINVAL; @@ -755,11 +759,10 @@ static int bmc150_accel_write_event(struct iio_dev *indio_dev, switch (info) { case IIO_EV_INFO_VALUE: - data->slope_thres = val; + data->slope_thres = val & 0xFF; break; case IIO_EV_INFO_PERIOD: - data->slope_dur &= ~BMC150_ACCEL_SLOPE_DUR_MASK; - data->slope_dur |= val & BMC150_ACCEL_SLOPE_DUR_MASK; + data->slope_dur = val & BMC150_ACCEL_SLOPE_DUR_MASK; break; default: return -EINVAL; @@ -788,36 +791,14 @@ static int bmc150_accel_write_event_config(struct iio_dev *indio_dev, struct bmc150_accel_data *data = iio_priv(indio_dev); int ret; - if (state && data->ev_enable_state) + if (state == data->ev_enable_state) return 0; mutex_lock(&data->mutex); - if (!state && data->motion_trigger_on) { - data->ev_enable_state = 0; - mutex_unlock(&data->mutex); - return 0; - } - - /* - * We will expect the enable and disable to do operation in - * in reverse order. This will happen here anyway as our - * resume operation uses sync mode runtime pm calls, the - * suspend operation will be delayed by autosuspend delay - * So the disable operation will still happen in reverse of - * enable operation. When runtime pm is disabled the mode - * is always on so sequence doesn't matter - */ - - ret = bmc150_accel_set_power_state(data, state); - if (ret < 0) { - mutex_unlock(&data->mutex); - return ret; - } - - ret = bmc150_accel_setup_any_motion_interrupt(data, state); + ret = bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_ANY_MOTION, + state); if (ret < 0) { - bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } @@ -832,11 +813,14 @@ static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig) { struct bmc150_accel_data *data = iio_priv(indio_dev); + int i; - if (data->dready_trig != trig && data->motion_trig != trig) - return -EINVAL; + for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { + if (data->triggers[i].indio_trig == trig) + return 0; + } - return 0; + return -EINVAL; } static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( @@ -1008,12 +992,12 @@ err_read: static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) { - struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); - struct bmc150_accel_data *data = iio_priv(indio_dev); + struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig); + struct bmc150_accel_data *data = t->data; int ret; /* new data interrupts don't need ack */ - if (data->dready_trigger_on) + if (t == &t->data->triggers[BMC150_ACCEL_TRIGGER_DATA_READY]) return 0; mutex_lock(&data->mutex); @@ -1032,43 +1016,35 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) return 0; } -static int bmc150_accel_data_rdy_trigger_set_state(struct iio_trigger *trig, +static int bmc150_accel_trigger_set_state(struct iio_trigger *trig, bool state) { - struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); - struct bmc150_accel_data *data = iio_priv(indio_dev); + struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig); + struct bmc150_accel_data *data = t->data; int ret; mutex_lock(&data->mutex); - if (!state && data->ev_enable_state && data->motion_trigger_on) { - data->motion_trigger_on = false; + if (t->enabled == state) { mutex_unlock(&data->mutex); return 0; } - /* - * Refer to comment in bmc150_accel_write_event_config for - * enable/disable operation order - */ - ret = bmc150_accel_set_power_state(data, state); - if (ret < 0) { - mutex_unlock(&data->mutex); - return ret; + if (t->setup) { + ret = t->setup(t, state); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } } - if (data->motion_trig == trig) - ret = bmc150_accel_setup_any_motion_interrupt(data, state); - else - ret = bmc150_accel_setup_new_data_interrupt(data, state); + + ret = bmc150_accel_set_interrupt(data, t->intr, state); if (ret < 0) { - bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } - if (data->motion_trig == trig) - data->motion_trigger_on = state; - else - data->dready_trigger_on = state; + + t->enabled = state; mutex_unlock(&data->mutex); @@ -1076,7 +1052,7 @@ static int bmc150_accel_data_rdy_trigger_set_state(struct iio_trigger *trig, } static const struct iio_trigger_ops bmc150_accel_trigger_ops = { - .set_trigger_state = bmc150_accel_data_rdy_trigger_set_state, + .set_trigger_state = bmc150_accel_trigger_set_state, .try_reenable = bmc150_accel_trig_try_reen, .owner = THIS_MODULE, }; @@ -1122,7 +1098,7 @@ static irqreturn_t bmc150_accel_event_handler(int irq, void *private) dir), data->timestamp); ack_intr_status: - if (!data->dready_trigger_on) + if (!data->triggers[BMC150_ACCEL_TRIGGER_DATA_READY].enabled) ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_RST_LATCH, BMC150_ACCEL_INT_MODE_LATCH_INT | @@ -1135,13 +1111,16 @@ static irqreturn_t bmc150_accel_data_rdy_trig_poll(int irq, void *private) { struct iio_dev *indio_dev = private; struct bmc150_accel_data *data = iio_priv(indio_dev); + int i; data->timestamp = iio_get_time_ns(); - if (data->dready_trigger_on) - iio_trigger_poll(data->dready_trig); - else if (data->motion_trigger_on) - iio_trigger_poll(data->motion_trig); + for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { + if (data->triggers[i].enabled) { + iio_trigger_poll(data->triggers[i].indio_trig); + break; + } + } if (data->ev_enable_state) return IRQ_WAKE_THREAD; @@ -1176,16 +1155,12 @@ static int bmc150_accel_gpio_probe(struct i2c_client *client, dev = &client->dev; /* data ready gpio interrupt pin */ - gpio = devm_gpiod_get_index(dev, BMC150_ACCEL_GPIO_NAME, 0); + gpio = devm_gpiod_get_index(dev, BMC150_ACCEL_GPIO_NAME, 0, GPIOD_IN); if (IS_ERR(gpio)) { dev_err(dev, "Failed: gpio get index\n"); return PTR_ERR(gpio); } - ret = gpiod_direction_input(gpio); - if (ret) - return ret; - ret = gpiod_to_irq(gpio); dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); @@ -1193,6 +1168,70 @@ static int bmc150_accel_gpio_probe(struct i2c_client *client, return ret; } +static const struct { + int intr; + const char *name; + int (*setup)(struct bmc150_accel_trigger *t, bool state); +} bmc150_accel_triggers[BMC150_ACCEL_TRIGGERS] = { + { + .intr = 0, + .name = "%s-dev%d", + }, + { + .intr = 1, + .name = "%s-any-motion-dev%d", + .setup = bmc150_accel_any_motion_setup, + }, +}; + +static void bmc150_accel_unregister_triggers(struct bmc150_accel_data *data, + int from) +{ + int i; + + for (i = from; i >= 0; i++) { + if (data->triggers[i].indio_trig) { + iio_trigger_unregister(data->triggers[i].indio_trig); + data->triggers[i].indio_trig = NULL; + } + } +} + +static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, + struct bmc150_accel_data *data) +{ + int i, ret; + + for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { + struct bmc150_accel_trigger *t = &data->triggers[i]; + + t->indio_trig = devm_iio_trigger_alloc(&data->client->dev, + bmc150_accel_triggers[i].name, + indio_dev->name, + indio_dev->id); + if (!t->indio_trig) { + ret = -ENOMEM; + break; + } + + t->indio_trig->dev.parent = &data->client->dev; + t->indio_trig->ops = &bmc150_accel_trigger_ops; + t->intr = bmc150_accel_triggers[i].intr; + t->data = data; + t->setup = bmc150_accel_triggers[i].setup; + iio_trigger_set_drvdata(t->indio_trig, t); + + ret = iio_trigger_register(t->indio_trig); + if (ret) + break; + } + + if (ret) + bmc150_accel_unregister_triggers(data, i - 1); + + return ret; +} + static int bmc150_accel_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1247,36 +1286,26 @@ static int bmc150_accel_probe(struct i2c_client *client, if (ret) return ret; - data->dready_trig = devm_iio_trigger_alloc(&client->dev, - "%s-dev%d", - indio_dev->name, - indio_dev->id); - if (!data->dready_trig) - return -ENOMEM; - - data->motion_trig = devm_iio_trigger_alloc(&client->dev, - "%s-any-motion-dev%d", - indio_dev->name, - indio_dev->id); - if (!data->motion_trig) - return -ENOMEM; - - data->dready_trig->dev.parent = &client->dev; - data->dready_trig->ops = &bmc150_accel_trigger_ops; - iio_trigger_set_drvdata(data->dready_trig, indio_dev); - ret = iio_trigger_register(data->dready_trig); - if (ret) + /* + * Set latched mode interrupt. While certain interrupts are + * non-latched regardless of this settings (e.g. new data) we + * want to use latch mode when we can to prevent interrupt + * flooding. + */ + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_INT_RST_LATCH, + BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n"); return ret; - - data->motion_trig->dev.parent = &client->dev; - data->motion_trig->ops = &bmc150_accel_trigger_ops; - iio_trigger_set_drvdata(data->motion_trig, indio_dev); - ret = iio_trigger_register(data->motion_trig); - if (ret) { - data->motion_trig = NULL; - goto err_trigger_unregister; } + bmc150_accel_interrupts_setup(indio_dev, data); + + ret = bmc150_accel_triggers_setup(indio_dev, data); + if (ret) + return ret; + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, bmc150_accel_trigger_handler, @@ -1308,13 +1337,10 @@ static int bmc150_accel_probe(struct i2c_client *client, err_iio_unregister: iio_device_unregister(indio_dev); err_buffer_cleanup: - if (data->dready_trig) + if (indio_dev->pollfunc) iio_triggered_buffer_cleanup(indio_dev); err_trigger_unregister: - if (data->dready_trig) - iio_trigger_unregister(data->dready_trig); - if (data->motion_trig) - iio_trigger_unregister(data->motion_trig); + bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); return ret; } @@ -1330,11 +1356,7 @@ static int bmc150_accel_remove(struct i2c_client *client) iio_device_unregister(indio_dev); - if (data->dready_trig) { - iio_triggered_buffer_cleanup(indio_dev); - iio_trigger_unregister(data->dready_trig); - iio_trigger_unregister(data->motion_trig); - } + bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); mutex_lock(&data->mutex); bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, 0); @@ -1362,8 +1384,7 @@ static int bmc150_accel_resume(struct device *dev) struct bmc150_accel_data *data = iio_priv(indio_dev); mutex_lock(&data->mutex); - if (data->dready_trigger_on || data->motion_trigger_on || - data->ev_enable_state) + if (atomic_read(&data->active_intr)) bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); mutex_unlock(&data->mutex); diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 567de269cc00..a98b5d212fb3 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -1169,16 +1169,12 @@ static int kxcjk1013_gpio_probe(struct i2c_client *client, dev = &client->dev; /* data ready gpio interrupt pin */ - gpio = devm_gpiod_get_index(dev, "kxcjk1013_int", 0); + gpio = devm_gpiod_get_index(dev, "kxcjk1013_int", 0, GPIOD_IN); if (IS_ERR(gpio)) { dev_err(dev, "acpi gpio get index failed\n"); return PTR_ERR(gpio); } - ret = gpiod_direction_input(gpio); - if (ret) - return ret; - ret = gpiod_to_irq(gpio); dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c index 46c38351c6a3..7db7cc0bf362 100644 --- a/drivers/iio/accel/mma9551.c +++ b/drivers/iio/accel/mma9551.c @@ -418,17 +418,18 @@ static int mma9551_gpio_probe(struct iio_dev *indio_dev) struct device *dev = &data->client->dev; for (i = 0; i < MMA9551_GPIO_COUNT; i++) { - gpio = devm_gpiod_get_index(dev, MMA9551_GPIO_NAME, i); + gpio = devm_gpiod_get_index(dev, MMA9551_GPIO_NAME, i, + GPIOD_IN); if (IS_ERR(gpio)) { dev_err(dev, "acpi gpio get index failed\n"); return PTR_ERR(gpio); } - ret = gpiod_direction_input(gpio); - if (ret) + ret = gpiod_to_irq(gpio); + if (ret < 0) return ret; - data->irqs[i] = gpiod_to_irq(gpio); + data->irqs[i] = ret; ret = devm_request_threaded_irq(dev, data->irqs[i], NULL, mma9551_event_handler, IRQF_TRIGGER_RISING | IRQF_ONESHOT, diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index d23ebf192f63..2df1af7d43fc 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -1109,16 +1109,12 @@ static int mma9553_gpio_probe(struct i2c_client *client) dev = &client->dev; /* data ready gpio interrupt pin */ - gpio = devm_gpiod_get_index(dev, MMA9553_GPIO_NAME, 0); + gpio = devm_gpiod_get_index(dev, MMA9553_GPIO_NAME, 0, GPIOD_IN); if (IS_ERR(gpio)) { dev_err(dev, "acpi gpio get index failed\n"); return PTR_ERR(gpio); } - ret = gpiod_direction_input(gpio); - if (ret) - return ret; - ret = gpiod_to_irq(gpio); dev_dbg(dev, "gpio resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 202daf889be2..9eaa8d1e582d 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -186,10 +186,11 @@ config MAX1363 data via the iio dev interface. config MCP320X - tristate "Microchip Technology MCP3204/08" + tristate "Microchip Technology MCP3x01/02/04/08" depends on SPI help - Say yes here to build support for Microchip Technology's MCP3204 or + Say yes here to build support for Microchip Technology's + MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204 or MCP3208 analog to digital converter. This driver can also be built as a module. If so, the module will be diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index 4dddeabdfbb0..b84922a4b32e 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -861,5 +861,5 @@ static struct spi_driver ad7793_driver = { module_spi_driver(ad7793_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); -MODULE_DESCRIPTION("Analog Devices AD7793 and simialr ADCs"); +MODULE_DESCRIPTION("Analog Devices AD7793 and similar ADCs"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index 8ec353c01d98..5b72d170fd36 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -259,7 +259,6 @@ static void vf610_adc_cfg_post_set(struct vf610_adc *info) static void vf610_adc_calibration(struct vf610_adc *info) { int adc_gc, hc_cfg; - int timeout; if (!info->adc_feature.calibration) return; @@ -271,9 +270,7 @@ static void vf610_adc_calibration(struct vf610_adc *info) adc_gc = readl(info->regs + VF610_REG_ADC_GC); writel(adc_gc | VF610_ADC_CAL, info->regs + VF610_REG_ADC_GC); - timeout = wait_for_completion_timeout - (&info->completion, VF610_ADC_TIMEOUT); - if (timeout == 0) + if (!wait_for_completion_timeout(&info->completion, VF610_ADC_TIMEOUT)) dev_err(info->dev, "Timeout for adc calibration\n"); adc_gc = readl(info->regs + VF610_REG_ADC_GS); diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c index 60451b328242..56d68e1d0987 100644 --- a/drivers/iio/gyro/bmg160.c +++ b/drivers/iio/gyro/bmg160.c @@ -1001,16 +1001,12 @@ static int bmg160_gpio_probe(struct i2c_client *client, dev = &client->dev; /* data ready gpio interrupt pin */ - gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0); + gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN); if (IS_ERR(gpio)) { dev_err(dev, "acpi gpio get index failed\n"); return PTR_ERR(gpio); } - ret = gpiod_direction_input(gpio); - if (ret) - return ret; - ret = gpiod_to_irq(gpio); dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c index 6a8020d48140..f0fd94055d88 100644 --- a/drivers/iio/gyro/itg3200_core.c +++ b/drivers/iio/gyro/itg3200_core.c @@ -223,6 +223,10 @@ static int itg3200_initial_setup(struct iio_dev *indio_dev) int ret; u8 val; + ret = itg3200_reset(indio_dev); + if (ret) + goto err_ret; + ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val); if (ret) goto err_ret; @@ -233,10 +237,6 @@ static int itg3200_initial_setup(struct iio_dev *indio_dev) goto err_ret; } - ret = itg3200_reset(indio_dev); - if (ret) - goto err_ret; - ret = itg3200_enable_full_scale(indio_dev); err_ret: return ret; @@ -351,6 +351,26 @@ static int itg3200_remove(struct i2c_client *client) return 0; } +static int __maybe_unused itg3200_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct itg3200 *st = iio_priv(indio_dev); + + dev_dbg(&st->i2c->dev, "suspend device"); + + return itg3200_write_reg_8(indio_dev, ITG3200_REG_POWER_MANAGEMENT, + ITG3200_SLEEP); +} + +static int __maybe_unused itg3200_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + + return itg3200_initial_setup(indio_dev); +} + +static SIMPLE_DEV_PM_OPS(itg3200_pm_ops, itg3200_suspend, itg3200_resume); + static const struct i2c_device_id itg3200_id[] = { { "itg3200", 0 }, { } @@ -361,6 +381,7 @@ static struct i2c_driver itg3200_driver = { .driver = { .owner = THIS_MODULE, .name = "itg3200", + .pm = &itg3200_pm_ops, }, .id_table = itg3200_id, .probe = itg3200_probe, diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile index 3a677c778afb..f566f6a7b3a9 100644 --- a/drivers/iio/imu/inv_mpu6050/Makefile +++ b/drivers/iio/imu/inv_mpu6050/Makefile @@ -3,4 +3,4 @@ # obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o -inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o +inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o inv_mpu_acpi.o diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c new file mode 100644 index 000000000000..1c982a56acd5 --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c @@ -0,0 +1,211 @@ +/* + * inv_mpu_acpi: ACPI processing for creating client devices + * Copyright (c) 2015, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifdef CONFIG_ACPI + +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/dmi.h> +#include <linux/acpi.h> +#include "inv_mpu_iio.h" + +enum inv_mpu_product_name { + INV_MPU_NOT_MATCHED, + INV_MPU_ASUS_T100TA, +}; + +static enum inv_mpu_product_name matched_product_name; + +static int __init asus_t100_matched(const struct dmi_system_id *d) +{ + matched_product_name = INV_MPU_ASUS_T100TA; + + return 0; +} + +static const struct dmi_system_id inv_mpu_dev_list[] = { + { + .callback = asus_t100_matched, + .ident = "Asus Transformer Book T100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC"), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"), + }, + }, + /* Add more matching tables here..*/ + {} +}; + +static int asus_acpi_get_sensor_info(struct acpi_device *adev, + struct i2c_client *client, + struct i2c_board_info *info) +{ + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + int i; + acpi_status status; + union acpi_object *cpm; + + status = acpi_evaluate_object(adev->handle, "CNF0", NULL, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + cpm = buffer.pointer; + for (i = 0; i < cpm->package.count; ++i) { + union acpi_object *elem; + int j; + + elem = &(cpm->package.elements[i]); + for (j = 0; j < elem->package.count; ++j) { + union acpi_object *sub_elem; + + sub_elem = &(elem->package.elements[j]); + if (sub_elem->type == ACPI_TYPE_STRING) + strlcpy(info->type, sub_elem->string.pointer, + sizeof(info->type)); + else if (sub_elem->type == ACPI_TYPE_INTEGER) { + if (sub_elem->integer.value != client->addr) { + info->addr = sub_elem->integer.value; + break; /* Not a MPU6500 primary */ + } + } + } + } + + kfree(buffer.pointer); + + return cpm->package.count; +} + +static int acpi_i2c_check_resource(struct acpi_resource *ares, void *data) +{ + u32 *addr = data; + + if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { + struct acpi_resource_i2c_serialbus *sb; + + sb = &ares->data.i2c_serial_bus; + if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { + if (*addr) + *addr |= (sb->slave_address << 16); + else + *addr = sb->slave_address; + } + } + + /* Tell the ACPI core that we already copied this address */ + return 1; +} + +static int inv_mpu_process_acpi_config(struct i2c_client *client, + unsigned short *primary_addr, + unsigned short *secondary_addr) +{ + const struct acpi_device_id *id; + struct acpi_device *adev; + u32 i2c_addr = 0; + LIST_HEAD(resources); + int ret; + + id = acpi_match_device(client->dev.driver->acpi_match_table, + &client->dev); + if (!id) + return -ENODEV; + + adev = ACPI_COMPANION(&client->dev); + if (!adev) + return -ENODEV; + + ret = acpi_dev_get_resources(adev, &resources, + acpi_i2c_check_resource, &i2c_addr); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&resources); + *primary_addr = i2c_addr & 0x0000ffff; + *secondary_addr = (i2c_addr & 0xffff0000) >> 16; + + return 0; +} + +int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) +{ + + st->mux_client = NULL; + if (ACPI_HANDLE(&st->client->dev)) { + struct i2c_board_info info; + struct acpi_device *adev; + int ret = -1; + + adev = ACPI_COMPANION(&st->client->dev); + memset(&info, 0, sizeof(info)); + + dmi_check_system(inv_mpu_dev_list); + switch (matched_product_name) { + case INV_MPU_ASUS_T100TA: + ret = asus_acpi_get_sensor_info(adev, st->client, + &info); + break; + /* Add more matched product processing here */ + default: + break; + } + + if (ret < 0) { + /* No matching DMI, so create device on INV6XX type */ + unsigned short primary, secondary; + + ret = inv_mpu_process_acpi_config(st->client, &primary, + &secondary); + if (!ret && secondary) { + char *name; + + info.addr = secondary; + strlcpy(info.type, dev_name(&adev->dev), + sizeof(info.type)); + name = strchr(info.type, ':'); + if (name) + *name = '\0'; + strlcat(info.type, "-client", + sizeof(info.type)); + } else + return 0; /* no secondary addr, which is OK */ + } + st->mux_client = i2c_new_device(st->mux_adapter, &info); + if (!st->mux_client) + return -ENODEV; + + } + + return 0; +} + +void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st) +{ + if (st->mux_client) + i2c_unregister_device(st->mux_client); +} +#else + +#include "inv_mpu_iio.h" + +int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) +{ + return 0; +} + +void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st) +{ +} +#endif diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index d8d5bed65e07..5613f3ab9f96 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -825,8 +825,14 @@ static int inv_mpu_probe(struct i2c_client *client, goto out_unreg_device; } + result = inv_mpu_acpi_create_mux_client(st); + if (result) + goto out_del_mux; + return 0; +out_del_mux: + i2c_del_mux_adapter(st->mux_adapter); out_unreg_device: iio_device_unregister(indio_dev); out_remove_trigger: @@ -841,6 +847,7 @@ static int inv_mpu_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); struct inv_mpu6050_state *st = iio_priv(indio_dev); + inv_mpu_acpi_delete_mux_client(st); i2c_del_mux_adapter(st->mux_adapter); iio_device_unregister(indio_dev); inv_mpu6050_remove_trigger(st); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index aa837de57079..db0a4a2758ab 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -121,6 +121,7 @@ struct inv_mpu6050_state { spinlock_t time_stamp_lock; struct i2c_client *client; struct i2c_adapter *mux_adapter; + struct i2c_client *mux_client; unsigned int powerup_count; struct inv_mpu6050_platform_data plat_data; DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); @@ -251,3 +252,5 @@ int inv_reset_fifo(struct iio_dev *indio_dev); int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask); int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on); +int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st); +void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st); diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c index 5cc3692acf37..75ab70100015 100644 --- a/drivers/iio/imu/kmx61.c +++ b/drivers/iio/imu/kmx61.c @@ -169,19 +169,18 @@ static const u16 kmx61_uscale_table[] = {9582, 19163, 38326}; static const struct { int val; int val2; - u8 odr_bits; -} kmx61_samp_freq_table[] = { {12, 500000, 0x00}, - {25, 0, 0x01}, - {50, 0, 0x02}, - {100, 0, 0x03}, - {200, 0, 0x04}, - {400, 0, 0x05}, - {800, 0, 0x06}, - {1600, 0, 0x07}, - {0, 781000, 0x08}, - {1, 563000, 0x09}, - {3, 125000, 0x0A}, - {6, 250000, 0x0B} }; +} kmx61_samp_freq_table[] = { {12, 500000}, + {25, 0}, + {50, 0}, + {100, 0}, + {200, 0}, + {400, 0}, + {800, 0}, + {1600, 0}, + {0, 781000}, + {1, 563000}, + {3, 125000}, + {6, 250000} }; static const struct { int val; @@ -302,24 +301,10 @@ static int kmx61_convert_freq_to_bit(int val, int val2) for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++) if (val == kmx61_samp_freq_table[i].val && val2 == kmx61_samp_freq_table[i].val2) - return kmx61_samp_freq_table[i].odr_bits; + return i; return -EINVAL; } -static int kmx61_convert_bit_to_freq(u8 odr_bits, int *val, int *val2) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++) - if (odr_bits == kmx61_samp_freq_table[i].odr_bits) { - *val = kmx61_samp_freq_table[i].val; - *val2 = kmx61_samp_freq_table[i].val2; - return 0; - } - return -EINVAL; -} - - static int kmx61_convert_wake_up_odr_to_bit(int val, int val2) { int i; @@ -478,7 +463,7 @@ static int kmx61_set_odr(struct kmx61_data *data, int val, int val2, u8 device) static int kmx61_get_odr(struct kmx61_data *data, int *val, int *val2, u8 device) -{ int i; +{ u8 lodr_bits; if (device & KMX61_ACC) @@ -490,13 +475,13 @@ static int kmx61_get_odr(struct kmx61_data *data, int *val, int *val2, else return -EINVAL; - for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++) - if (lodr_bits == kmx61_samp_freq_table[i].odr_bits) { - *val = kmx61_samp_freq_table[i].val; - *val2 = kmx61_samp_freq_table[i].val2; - return 0; - } - return -EINVAL; + if (lodr_bits >= ARRAY_SIZE(kmx61_samp_freq_table)) + return -EINVAL; + + *val = kmx61_samp_freq_table[lodr_bits].val; + *val2 = kmx61_samp_freq_table[lodr_bits].val2; + + return 0; } static int kmx61_set_range(struct kmx61_data *data, u8 range) @@ -580,8 +565,11 @@ static int kmx61_chip_init(struct kmx61_data *data) } data->odr_bits = ret; - /* set output data rate for wake up (motion detection) function */ - ret = kmx61_convert_bit_to_freq(data->odr_bits, &val, &val2); + /* + * set output data rate for wake up (motion detection) function + * to match data rate for accelerometer sampling + */ + ret = kmx61_get_odr(data, &val, &val2, KMX61_ACC); if (ret < 0) return ret; @@ -1267,16 +1255,12 @@ static int kmx61_gpio_probe(struct i2c_client *client, struct kmx61_data *data) dev = &client->dev; /* data ready gpio interrupt pin */ - gpio = devm_gpiod_get_index(dev, KMX61_GPIO_NAME, 0); + gpio = devm_gpiod_get_index(dev, KMX61_GPIO_NAME, 0, GPIOD_IN); if (IS_ERR(gpio)) { dev_err(dev, "acpi gpio get index failed\n"); return PTR_ERR(gpio); } - ret = gpiod_direction_input(gpio); - if (ret) - return ret; - ret = gpiod_to_irq(gpio); dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 71333140d42c..c2d5440aa226 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -761,6 +761,11 @@ static struct device_attribute dev_attr_length_ro = __ATTR(length, static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, iio_buffer_show_enable, iio_buffer_store_enable); +static struct attribute *iio_buffer_attrs[] = { + &dev_attr_length.attr, + &dev_attr_enable.attr, +}; + int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev) { struct iio_dev_attr *p; @@ -778,21 +783,23 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev) attrcount++; } - buffer->buffer_group.name = "buffer"; - buffer->buffer_group.attrs = kcalloc(attrcount + 3, - sizeof(*buffer->buffer_group.attrs), GFP_KERNEL); - if (!buffer->buffer_group.attrs) + attr = kcalloc(attrcount + ARRAY_SIZE(iio_buffer_attrs) + 1, + sizeof(struct attribute *), GFP_KERNEL); + if (!attr) return -ENOMEM; - if (buffer->access->set_length) - buffer->buffer_group.attrs[0] = &dev_attr_length.attr; - else - buffer->buffer_group.attrs[0] = &dev_attr_length_ro.attr; - buffer->buffer_group.attrs[1] = &dev_attr_enable.attr; + memcpy(attr, iio_buffer_attrs, sizeof(iio_buffer_attrs)); + if (!buffer->access->set_length) + attr[0] = &dev_attr_length_ro.attr; + if (buffer->attrs) - memcpy(&buffer->buffer_group.attrs[2], buffer->attrs, - sizeof(*&buffer->buffer_group.attrs) * attrcount); - buffer->buffer_group.attrs[attrcount+2] = NULL; + memcpy(&attr[ARRAY_SIZE(iio_buffer_attrs)], buffer->attrs, + sizeof(struct attribute *) * attrcount); + + attr[attrcount + ARRAY_SIZE(iio_buffer_attrs)] = NULL; + + buffer->buffer_group.name = "buffer"; + buffer->buffer_group.attrs = attr; indio_dev->groups[indio_dev->groupcounter++] = &buffer->buffer_group; diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index a224afd6380c..01a1a16ab7be 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -59,6 +59,16 @@ config CM3232 To compile this driver as a module, choose M here: the module will be called cm3232. +config CM3323 + depends on I2C + tristate "Capella CM3323 color light sensor" + help + Say Y here if you want to build a driver for Capela CM3323 + color sensor. + + To compile this driver as a module, choose M here: the module will + be called cm3323. + config CM36651 depends on I2C tristate "CM36651 driver" diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index b12a5160d9e0..ad7c30fe443b 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_AL3320A) += al3320a.o obj-$(CONFIG_APDS9300) += apds9300.o obj-$(CONFIG_CM32181) += cm32181.o obj-$(CONFIG_CM3232) += cm3232.o +obj-$(CONFIG_CM3323) += cm3323.o obj-$(CONFIG_CM36651) += cm36651.o obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c index 90e3519a91de..39c8d99cc48e 100644 --- a/drivers/iio/light/cm3232.c +++ b/drivers/iio/light/cm3232.c @@ -378,6 +378,39 @@ static const struct i2c_device_id cm3232_id[] = { {} }; +#ifdef CONFIG_PM_SLEEP +static int cm3232_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct cm3232_chip *chip = iio_priv(indio_dev); + struct i2c_client *client = chip->client; + int ret; + + chip->regs_cmd |= CM3232_CMD_ALS_DISABLE; + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, + chip->regs_cmd); + + return ret; +} + +static int cm3232_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct cm3232_chip *chip = iio_priv(indio_dev); + struct i2c_client *client = chip->client; + int ret; + + chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE; + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD, + chip->regs_cmd | CM3232_CMD_ALS_RESET); + + return ret; +} + +static const struct dev_pm_ops cm3232_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(cm3232_suspend, cm3232_resume)}; +#endif + MODULE_DEVICE_TABLE(i2c, cm3232_id); static const struct of_device_id cm3232_of_match[] = { @@ -390,6 +423,9 @@ static struct i2c_driver cm3232_driver = { .name = "cm3232", .owner = THIS_MODULE, .of_match_table = of_match_ptr(cm3232_of_match), +#ifdef CONFIG_PM_SLEEP + .pm = &cm3232_pm_ops, +#endif }, .id_table = cm3232_id, .probe = cm3232_probe, diff --git a/drivers/iio/light/cm3323.c b/drivers/iio/light/cm3323.c new file mode 100644 index 000000000000..869033e48a1f --- /dev/null +++ b/drivers/iio/light/cm3323.c @@ -0,0 +1,286 @@ +/* + * CM3323 - Capella Color Light Sensor + * + * Copyright (c) 2015, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for CM3323 (7-bit I2C slave address 0x10) + * + * TODO: calibscale to correct the lens factor + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mutex.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define CM3323_DRV_NAME "cm3323" + +#define CM3323_CMD_CONF 0x00 +#define CM3323_CMD_RED_DATA 0x08 +#define CM3323_CMD_GREEN_DATA 0x09 +#define CM3323_CMD_BLUE_DATA 0x0A +#define CM3323_CMD_CLEAR_DATA 0x0B + +#define CM3323_CONF_SD_BIT BIT(0) /* sensor disable */ +#define CM3323_CONF_AF_BIT BIT(1) /* auto/manual force mode */ +#define CM3323_CONF_IT_MASK (BIT(4) | BIT(5) | BIT(6)) +#define CM3323_CONF_IT_SHIFT 4 + +#define CM3323_INT_TIME_AVAILABLE "0.04 0.08 0.16 0.32 0.64 1.28" + +static const struct { + int val; + int val2; +} cm3323_int_time[] = { + {0, 40000}, /* 40 ms */ + {0, 80000}, /* 80 ms */ + {0, 160000}, /* 160 ms */ + {0, 320000}, /* 320 ms */ + {0, 640000}, /* 640 ms */ + {1, 280000}, /* 1280 ms */ +}; + +struct cm3323_data { + struct i2c_client *client; + u16 reg_conf; + struct mutex mutex; +}; + +#define CM3323_COLOR_CHANNEL(_color, _addr) { \ + .type = IIO_INTENSITY, \ + .modified = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \ + .channel2 = IIO_MOD_LIGHT_##_color, \ + .address = _addr, \ +} + +static const struct iio_chan_spec cm3323_channels[] = { + CM3323_COLOR_CHANNEL(RED, CM3323_CMD_RED_DATA), + CM3323_COLOR_CHANNEL(GREEN, CM3323_CMD_GREEN_DATA), + CM3323_COLOR_CHANNEL(BLUE, CM3323_CMD_BLUE_DATA), + CM3323_COLOR_CHANNEL(CLEAR, CM3323_CMD_CLEAR_DATA), +}; + +static IIO_CONST_ATTR_INT_TIME_AVAIL(CM3323_INT_TIME_AVAILABLE); + +static struct attribute *cm3323_attributes[] = { + &iio_const_attr_integration_time_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group cm3323_attribute_group = { + .attrs = cm3323_attributes, +}; + +static int cm3323_init(struct iio_dev *indio_dev) +{ + int ret; + struct cm3323_data *data = iio_priv(indio_dev); + + ret = i2c_smbus_read_word_data(data->client, CM3323_CMD_CONF); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_conf\n"); + return ret; + } + + /* enable sensor and set auto force mode */ + ret &= ~(CM3323_CONF_SD_BIT | CM3323_CONF_AF_BIT); + + ret = i2c_smbus_write_word_data(data->client, CM3323_CMD_CONF, ret); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_conf\n"); + return ret; + } + + data->reg_conf = ret; + + return 0; +} + +static void cm3323_disable(struct iio_dev *indio_dev) +{ + int ret; + struct cm3323_data *data = iio_priv(indio_dev); + + ret = i2c_smbus_write_word_data(data->client, CM3323_CMD_CONF, + CM3323_CONF_SD_BIT); + if (ret < 0) + dev_err(&data->client->dev, "Error writing reg_conf\n"); +} + +static int cm3323_set_it_bits(struct cm3323_data *data, int val, int val2) +{ + int i, ret; + u16 reg_conf; + + for (i = 0; i < ARRAY_SIZE(cm3323_int_time); i++) { + if (val == cm3323_int_time[i].val && + val2 == cm3323_int_time[i].val2) { + reg_conf = data->reg_conf; + reg_conf |= i << CM3323_CONF_IT_SHIFT; + + ret = i2c_smbus_write_word_data(data->client, + CM3323_CMD_CONF, + reg_conf); + if (ret < 0) + return ret; + + data->reg_conf = reg_conf; + return 0; + } + } + return -EINVAL; +} + +static int cm3323_get_it_bits(struct cm3323_data *data) +{ + int bits; + + bits = (data->reg_conf & CM3323_CONF_IT_MASK) >> + CM3323_CONF_IT_SHIFT; + + if (bits >= ARRAY_SIZE(cm3323_int_time)) + return -EINVAL; + return bits; +} + +static int cm3323_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int i, ret; + struct cm3323_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->mutex); + ret = i2c_smbus_read_word_data(data->client, chan->address); + if (ret < 0) { + mutex_unlock(&data->mutex); + return ret; + } + *val = ret; + mutex_unlock(&data->mutex); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_INT_TIME: + mutex_lock(&data->mutex); + i = cm3323_get_it_bits(data); + if (i < 0) { + mutex_unlock(&data->mutex); + return -EINVAL; + } + + *val = cm3323_int_time[i].val; + *val2 = cm3323_int_time[i].val2; + mutex_unlock(&data->mutex); + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int cm3323_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct cm3323_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + mutex_lock(&data->mutex); + ret = cm3323_set_it_bits(data, val, val2); + mutex_unlock(&data->mutex); + + return ret; + default: + return -EINVAL; + } +} + +static const struct iio_info cm3323_info = { + .driver_module = THIS_MODULE, + .read_raw = cm3323_read_raw, + .write_raw = cm3323_write_raw, + .attrs = &cm3323_attribute_group, +}; + +static int cm3323_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cm3323_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + mutex_init(&data->mutex); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &cm3323_info; + indio_dev->name = CM3323_DRV_NAME; + indio_dev->channels = cm3323_channels; + indio_dev->num_channels = ARRAY_SIZE(cm3323_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = cm3323_init(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "cm3323 chip init failed\n"); + return ret; + } + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "failed to register iio dev\n"); + goto err_init; + } + return 0; +err_init: + cm3323_disable(indio_dev); + return ret; +} + +static int cm3323_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + cm3323_disable(indio_dev); + + return 0; +} + +static const struct i2c_device_id cm3323_id[] = { + {"cm3323", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, cm3323_id); + +static struct i2c_driver cm3323_driver = { + .driver = { + .name = CM3323_DRV_NAME, + }, + .probe = cm3323_probe, + .remove = cm3323_remove, + .id_table = cm3323_id, +}; + +module_i2c_driver(cm3323_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); +MODULE_DESCRIPTION("Capella CM3323 Color Light Sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c index 221ed16de1f7..32b6449833fa 100644 --- a/drivers/iio/light/gp2ap020a00f.c +++ b/drivers/iio/light/gp2ap020a00f.c @@ -46,6 +46,7 @@ #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> +#include <asm/unaligned.h> #include <linux/iio/buffer.h> #include <linux/iio/events.h> #include <linux/iio/iio.h> @@ -966,7 +967,6 @@ static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data) struct iio_dev *indio_dev = pf->indio_dev; struct gp2ap020a00f_data *priv = iio_priv(indio_dev); size_t d_size = 0; - __le32 light_lux; int i, out_val, ret; for_each_set_bit(i, indio_dev->active_scan_mask, @@ -981,8 +981,8 @@ static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data) i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) { out_val = le16_to_cpup((__le16 *)&priv->buffer[d_size]); gp2ap020a00f_output_to_lux(priv, &out_val); - light_lux = cpu_to_le32(out_val); - memcpy(&priv->buffer[d_size], (u8 *)&light_lux, 4); + + put_unaligned_le32(out_val, &priv->buffer[d_size]); d_size += 4; } else { d_size += 2; diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c index 29de7e7d9562..3a3af89beaf9 100644 --- a/drivers/iio/light/jsa1212.c +++ b/drivers/iio/light/jsa1212.c @@ -308,7 +308,7 @@ static bool jsa1212_is_volatile_reg(struct device *dev, unsigned int reg) } } -static struct regmap_config jsa1212_regmap_config = { +static const struct regmap_config jsa1212_regmap_config = { .name = JSA1212_REGMAP_NAME, .reg_bits = 8, .val_bits = 8, diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index a3be53792072..fa6295041947 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -52,6 +52,33 @@ config MPL3115 To compile this driver as a module, choose M here: the module will be called mpl3115. +config MS5611 + tristate "Measurement Specialities MS5611 pressure sensor driver" + help + Say Y here to build support for the Measurement Specialities + MS5611 pressure and temperature sensor. + + To compile this driver as a module, choose M here: the module will + be called ms5611_core. + +config MS5611_I2C + tristate "support I2C bus connection" + depends on I2C && MS5611 + help + Say Y here to build I2C bus support for MS5611. + + To compile this driver as a module, choose M here: the module will + be called ms5611_i2c. + +config MS5611_SPI + tristate "support SPI bus connection" + depends on SPI_MASTER && MS5611 + help + Say Y here to build SPI bus support for MS5611. + + To compile this driver as a module, choose M here: the module will + be called ms5611_spi. + config IIO_ST_PRESS tristate "STMicroelectronics pressure sensor Driver" depends on (I2C || SPI_MASTER) && SYSFS diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 88011f2ae00e..a4f98f8d90ed 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -7,6 +7,9 @@ obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_MPL115) += mpl115.o obj-$(CONFIG_MPL3115) += mpl3115.o +obj-$(CONFIG_MS5611) += ms5611_core.o +obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o +obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o st_pressure-y := st_pressure_core.o st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h new file mode 100644 index 000000000000..099c6cdea43f --- /dev/null +++ b/drivers/iio/pressure/ms5611.h @@ -0,0 +1,44 @@ +/* + * MS5611 pressure and temperature sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _MS5611_H +#define _MS5611_H + +#include <linux/device.h> +#include <linux/iio/iio.h> +#include <linux/mutex.h> + +#define MS5611_RESET 0x1e +#define MS5611_READ_ADC 0x00 +#define MS5611_READ_PROM_WORD 0xA0 +#define MS5611_START_TEMP_CONV 0x58 +#define MS5611_START_PRESSURE_CONV 0x48 + +#define MS5611_CONV_TIME_MIN 9040 +#define MS5611_CONV_TIME_MAX 10000 + +#define MS5611_PROM_WORDS_NB 8 + +struct ms5611_state { + void *client; + struct mutex lock; + + int (*reset)(struct device *dev); + int (*read_prom_word)(struct device *dev, int index, u16 *word); + int (*read_adc_temp_and_pressure)(struct device *dev, + s32 *temp, s32 *pressure); + + u16 prom[MS5611_PROM_WORDS_NB]; +}; + +int ms5611_probe(struct iio_dev *indio_dev, struct device *dev); + +#endif /* _MS5611_H */ diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c new file mode 100644 index 000000000000..e42c8531d9b3 --- /dev/null +++ b/drivers/iio/pressure/ms5611_core.c @@ -0,0 +1,215 @@ +/* + * MS5611 pressure and temperature sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Data sheet: + * http://www.meas-spec.com/downloads/MS5611-01BA03.pdf + * + */ + +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/delay.h> + +#include "ms5611.h" + +static bool ms5611_prom_is_valid(u16 *prom, size_t len) +{ + int i, j; + uint16_t crc = 0, crc_orig = prom[7] & 0x000F; + + prom[7] &= 0xFF00; + + for (i = 0; i < len * 2; i++) { + if (i % 2 == 1) + crc ^= prom[i >> 1] & 0x00FF; + else + crc ^= prom[i >> 1] >> 8; + + for (j = 0; j < 8; j++) { + if (crc & 0x8000) + crc = (crc << 1) ^ 0x3000; + else + crc <<= 1; + } + } + + crc = (crc >> 12) & 0x000F; + + return crc_orig != 0x0000 && crc == crc_orig; +} + +static int ms5611_read_prom(struct iio_dev *indio_dev) +{ + int ret, i; + struct ms5611_state *st = iio_priv(indio_dev); + + for (i = 0; i < MS5611_PROM_WORDS_NB; i++) { + ret = st->read_prom_word(&indio_dev->dev, i, &st->prom[i]); + if (ret < 0) { + dev_err(&indio_dev->dev, + "failed to read prom at %d\n", i); + return ret; + } + } + + if (!ms5611_prom_is_valid(st->prom, MS5611_PROM_WORDS_NB)) { + dev_err(&indio_dev->dev, "PROM integrity check failed\n"); + return -ENODEV; + } + + return 0; +} + +static int ms5611_read_temp_and_pressure(struct iio_dev *indio_dev, + s32 *temp, s32 *pressure) +{ + int ret; + s32 t, p; + s64 off, sens, dt; + struct ms5611_state *st = iio_priv(indio_dev); + + ret = st->read_adc_temp_and_pressure(&indio_dev->dev, &t, &p); + if (ret < 0) { + dev_err(&indio_dev->dev, + "failed to read temperature and pressure\n"); + return ret; + } + + dt = t - (st->prom[5] << 8); + off = ((s64)st->prom[2] << 16) + ((st->prom[4] * dt) >> 7); + sens = ((s64)st->prom[1] << 15) + ((st->prom[3] * dt) >> 8); + + t = 2000 + ((st->prom[6] * dt) >> 23); + if (t < 2000) { + s64 off2, sens2, t2; + + t2 = (dt * dt) >> 31; + off2 = (5 * (t - 2000) * (t - 2000)) >> 1; + sens2 = off2 >> 1; + + if (t < -1500) { + s64 tmp = (t + 1500) * (t + 1500); + + off2 += 7 * tmp; + sens2 += (11 * tmp) >> 1; + } + + t -= t2; + off -= off2; + sens -= sens2; + } + + *temp = t; + *pressure = (((p * sens) >> 21) - off) >> 15; + + return 0; +} + +static int ms5611_reset(struct iio_dev *indio_dev) +{ + int ret; + struct ms5611_state *st = iio_priv(indio_dev); + + ret = st->reset(&indio_dev->dev); + if (ret < 0) { + dev_err(&indio_dev->dev, "failed to reset device\n"); + return ret; + } + + usleep_range(3000, 4000); + + return 0; +} + +static int ms5611_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + s32 temp, pressure; + struct ms5611_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + mutex_lock(&st->lock); + ret = ms5611_read_temp_and_pressure(indio_dev, + &temp, &pressure); + mutex_unlock(&st->lock); + if (ret < 0) + return ret; + + switch (chan->type) { + case IIO_TEMP: + *val = temp * 10; + return IIO_VAL_INT; + case IIO_PRESSURE: + *val = pressure / 1000; + *val2 = (pressure % 1000) * 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static const struct iio_chan_spec ms5611_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE) + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE) + } +}; + +static const struct iio_info ms5611_info = { + .read_raw = &ms5611_read_raw, + .driver_module = THIS_MODULE, +}; + +static int ms5611_init(struct iio_dev *indio_dev) +{ + int ret; + + ret = ms5611_reset(indio_dev); + if (ret < 0) + return ret; + + return ms5611_read_prom(indio_dev); +} + +int ms5611_probe(struct iio_dev *indio_dev, struct device *dev) +{ + int ret; + struct ms5611_state *st = iio_priv(indio_dev); + + mutex_init(&st->lock); + indio_dev->dev.parent = dev; + indio_dev->name = dev->driver->name; + indio_dev->info = &ms5611_info; + indio_dev->channels = ms5611_channels; + indio_dev->num_channels = ARRAY_SIZE(ms5611_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = ms5611_init(indio_dev); + if (ret < 0) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL(ms5611_probe); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("MS5611 core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c new file mode 100644 index 000000000000..748fd9acaad8 --- /dev/null +++ b/drivers/iio/pressure/ms5611_i2c.c @@ -0,0 +1,128 @@ +/* + * MS5611 pressure and temperature sensor driver (I2C bus) + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * 7-bit I2C slave addresses: + * + * 0x77 (CSB pin low) + * 0x76 (CSB pin high) + * + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/module.h> + +#include "ms5611.h" + +static int ms5611_i2c_reset(struct device *dev) +{ + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + return i2c_smbus_write_byte(st->client, MS5611_RESET); +} + +static int ms5611_i2c_read_prom_word(struct device *dev, int index, u16 *word) +{ + int ret; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + ret = i2c_smbus_read_word_swapped(st->client, + MS5611_READ_PROM_WORD + (index << 1)); + if (ret < 0) + return ret; + + *word = ret; + + return 0; +} + +static int ms5611_i2c_read_adc(struct ms5611_state *st, s32 *val) +{ + int ret; + u8 buf[3]; + + ret = i2c_smbus_read_i2c_block_data(st->client, MS5611_READ_ADC, + 3, buf); + if (ret < 0) + return ret; + + *val = (buf[0] << 16) | (buf[1] << 8) | buf[2]; + + return 0; +} + +static int ms5611_i2c_read_adc_temp_and_pressure(struct device *dev, + s32 *temp, s32 *pressure) +{ + int ret; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + ret = i2c_smbus_write_byte(st->client, MS5611_START_TEMP_CONV); + if (ret < 0) + return ret; + + usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX); + + ret = ms5611_i2c_read_adc(st, temp); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte(st->client, MS5611_START_PRESSURE_CONV); + if (ret < 0) + return ret; + + usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX); + + return ms5611_i2c_read_adc(st, pressure); +} + +static int ms5611_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ms5611_state *st; + struct iio_dev *indio_dev; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE | + I2C_FUNC_SMBUS_READ_WORD_DATA | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + st->reset = ms5611_i2c_reset; + st->read_prom_word = ms5611_i2c_read_prom_word; + st->read_adc_temp_and_pressure = ms5611_i2c_read_adc_temp_and_pressure; + st->client = client; + + return ms5611_probe(indio_dev, &client->dev); +} + +static const struct i2c_device_id ms5611_id[] = { + { "ms5611", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ms5611_id); + +static struct i2c_driver ms5611_driver = { + .driver = { + .name = "ms5611", + .owner = THIS_MODULE, + }, + .id_table = ms5611_id, + .probe = ms5611_i2c_probe, +}; +module_i2c_driver(ms5611_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("MS5611 i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c new file mode 100644 index 000000000000..976726fd4e6c --- /dev/null +++ b/drivers/iio/pressure/ms5611_spi.c @@ -0,0 +1,127 @@ +/* + * MS5611 pressure and temperature sensor driver (SPI bus) + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/spi/spi.h> + +#include "ms5611.h" + +static int ms5611_spi_reset(struct device *dev) +{ + u8 cmd = MS5611_RESET; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + return spi_write_then_read(st->client, &cmd, 1, NULL, 0); +} + +static int ms5611_spi_read_prom_word(struct device *dev, int index, u16 *word) +{ + int ret; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + ret = spi_w8r16be(st->client, MS5611_READ_PROM_WORD + (index << 1)); + if (ret < 0) + return ret; + + *word = ret; + + return 0; +} + +static int ms5611_spi_read_adc(struct device *dev, s32 *val) +{ + int ret; + u8 buf[3] = { MS5611_READ_ADC }; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + ret = spi_write_then_read(st->client, buf, 1, buf, 3); + if (ret < 0) + return ret; + + *val = (buf[0] << 16) | (buf[1] << 8) | buf[2]; + + return 0; +} + +static int ms5611_spi_read_adc_temp_and_pressure(struct device *dev, + s32 *temp, s32 *pressure) +{ + u8 cmd; + int ret; + struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev)); + + cmd = MS5611_START_TEMP_CONV; + ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0); + if (ret < 0) + return ret; + + usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX); + + ret = ms5611_spi_read_adc(dev, temp); + if (ret < 0) + return ret; + + cmd = MS5611_START_PRESSURE_CONV; + ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0); + if (ret < 0) + return ret; + + usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX); + + return ms5611_spi_read_adc(dev, pressure); +} + +static int ms5611_spi_probe(struct spi_device *spi) +{ + int ret; + struct ms5611_state *st; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + spi->mode = SPI_MODE_0; + spi->max_speed_hz = 20000000; + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret < 0) + return ret; + + st = iio_priv(indio_dev); + st->reset = ms5611_spi_reset; + st->read_prom_word = ms5611_spi_read_prom_word; + st->read_adc_temp_and_pressure = ms5611_spi_read_adc_temp_and_pressure; + st->client = spi; + + return ms5611_probe(indio_dev, &spi->dev); +} + +static const struct spi_device_id ms5611_id[] = { + { "ms5611", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, ms5611_id); + +static struct spi_driver ms5611_driver = { + .driver = { + .name = "ms5611", + .owner = THIS_MODULE, + }, + .id_table = ms5611_id, + .probe = ms5611_spi_probe, +}; +module_spi_driver(ms5611_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("MS5611 spi driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c index 74dff4e4a11a..0b4d79490b05 100644 --- a/drivers/iio/proximity/sx9500.c +++ b/drivers/iio/proximity/sx9500.c @@ -618,16 +618,12 @@ static int sx9500_gpio_probe(struct i2c_client *client, dev = &client->dev; /* data ready gpio interrupt pin */ - gpio = devm_gpiod_get_index(dev, SX9500_GPIO_NAME, 0); + gpio = devm_gpiod_get_index(dev, SX9500_GPIO_NAME, 0, GPIOD_IN); if (IS_ERR(gpio)) { dev_err(dev, "acpi gpio get index failed\n"); return PTR_ERR(gpio); } - ret = gpiod_direction_input(gpio); - if (ret) - return ret; - ret = gpiod_to_irq(gpio); dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret); diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c index c8b6ac8b2d69..e2c6f1a0d27f 100644 --- a/drivers/iio/temperature/mlx90614.c +++ b/drivers/iio/temperature/mlx90614.c @@ -23,8 +23,8 @@ #define MLX90614_OP_RAM 0x00 /* RAM offsets with 16-bit data, MSB first */ -#define MLX90614_TA 0x06 /* ambient temperature */ -#define MLX90614_TOBJ1 0x07 /* object temperature */ +#define MLX90614_TA (MLX90614_OP_RAM | 0x06) /* ambient temperature */ +#define MLX90614_TOBJ1 (MLX90614_OP_RAM | 0x07) /* object 1 temperature */ struct mlx90614_data { struct i2c_client *client; @@ -42,13 +42,13 @@ static int mlx90614_read_raw(struct iio_dev *indio_dev, switch (channel->channel2) { case IIO_MOD_TEMP_AMBIENT: ret = i2c_smbus_read_word_data(data->client, - MLX90614_OP_RAM | MLX90614_TA); + MLX90614_TA); if (ret < 0) return ret; break; case IIO_MOD_TEMP_OBJECT: ret = i2c_smbus_read_word_data(data->client, - MLX90614_OP_RAM | MLX90614_TOBJ1); + MLX90614_TOBJ1); if (ret < 0) return ret; break; diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 816174388f13..17f4ee7f8b76 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -993,7 +993,7 @@ static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev, int i, len = 0; for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++) - len += sprintf(buf + len, "%d.%09u ", + len += sprintf(buf + len, "%u.%09u ", lradc->scale_avail[ch][i].integer, lradc->scale_avail[ch][i].nano); diff --git a/drivers/staging/iio/magnetometer/hmc5843_i2c.c b/drivers/staging/iio/magnetometer/hmc5843_i2c.c index 6b4c74236916..ff08667fa2f6 100644 --- a/drivers/staging/iio/magnetometer/hmc5843_i2c.c +++ b/drivers/staging/iio/magnetometer/hmc5843_i2c.c @@ -19,41 +19,41 @@ #include "hmc5843.h" static const struct regmap_range hmc5843_readable_ranges[] = { - regmap_reg_range(0, HMC5843_ID_END), + regmap_reg_range(0, HMC5843_ID_END), }; -static struct regmap_access_table hmc5843_readable_table = { - .yes_ranges = hmc5843_readable_ranges, - .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), +static const struct regmap_access_table hmc5843_readable_table = { + .yes_ranges = hmc5843_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), }; static const struct regmap_range hmc5843_writable_ranges[] = { - regmap_reg_range(0, HMC5843_MODE_REG), + regmap_reg_range(0, HMC5843_MODE_REG), }; -static struct regmap_access_table hmc5843_writable_table = { - .yes_ranges = hmc5843_writable_ranges, - .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), +static const struct regmap_access_table hmc5843_writable_table = { + .yes_ranges = hmc5843_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), }; static const struct regmap_range hmc5843_volatile_ranges[] = { - regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), }; -static struct regmap_access_table hmc5843_volatile_table = { - .yes_ranges = hmc5843_volatile_ranges, - .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), +static const struct regmap_access_table hmc5843_volatile_table = { + .yes_ranges = hmc5843_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), }; -static struct regmap_config hmc5843_i2c_regmap_config = { - .reg_bits = 8, - .val_bits = 8, +static const struct regmap_config hmc5843_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, - .rd_table = &hmc5843_readable_table, - .wr_table = &hmc5843_writable_table, - .volatile_table = &hmc5843_volatile_table, + .rd_table = &hmc5843_readable_table, + .wr_table = &hmc5843_writable_table, + .volatile_table = &hmc5843_volatile_table, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_RBTREE, }; static int hmc5843_i2c_probe(struct i2c_client *cli, diff --git a/drivers/staging/iio/magnetometer/hmc5843_spi.c b/drivers/staging/iio/magnetometer/hmc5843_spi.c index 98c4b57101c9..8e658f736e1f 100644 --- a/drivers/staging/iio/magnetometer/hmc5843_spi.c +++ b/drivers/staging/iio/magnetometer/hmc5843_spi.c @@ -19,7 +19,7 @@ static const struct regmap_range hmc5843_readable_ranges[] = { regmap_reg_range(0, HMC5843_ID_END), }; -static struct regmap_access_table hmc5843_readable_table = { +static const struct regmap_access_table hmc5843_readable_table = { .yes_ranges = hmc5843_readable_ranges, .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), }; @@ -28,7 +28,7 @@ static const struct regmap_range hmc5843_writable_ranges[] = { regmap_reg_range(0, HMC5843_MODE_REG), }; -static struct regmap_access_table hmc5843_writable_table = { +static const struct regmap_access_table hmc5843_writable_table = { .yes_ranges = hmc5843_writable_ranges, .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), }; @@ -37,12 +37,12 @@ static const struct regmap_range hmc5843_volatile_ranges[] = { regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), }; -static struct regmap_access_table hmc5843_volatile_table = { +static const struct regmap_access_table hmc5843_volatile_table = { .yes_ranges = hmc5843_volatile_ranges, .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), }; -static struct regmap_config hmc5843_spi_regmap_config = { +static const struct regmap_config hmc5843_spi_regmap_config = { .reg_bits = 8, .val_bits = 8, diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c index 8dc5089772a3..6335b5815acd 100644 --- a/drivers/staging/iio/meter/ade7754.c +++ b/drivers/staging/iio/meter/ade7754.c @@ -216,9 +216,13 @@ error_ret: static int ade7754_reset(struct device *dev) { + int ret; u8 val; - ade7754_spi_read_reg_8(dev, ADE7754_OPMODE, &val); + ret = ade7754_spi_read_reg_8(dev, ADE7754_OPMODE, &val); + if (ret < 0) + return ret; + val |= 1 << 6; /* Software Chip Reset */ return ade7754_spi_write_reg_8(dev, ADE7754_OPMODE, val); } @@ -362,9 +366,16 @@ error_ret: /* Power down the device */ static int ade7754_stop_device(struct device *dev) { + int ret; u8 val; - ade7754_spi_read_reg_8(dev, ADE7754_OPMODE, &val); + ret = ade7754_spi_read_reg_8(dev, ADE7754_OPMODE, &val); + if (ret < 0) { + dev_err(dev, "unable to power down the device, error: %d", + ret); + return ret; + } + val |= 7 << 3; /* ADE7754 powered down */ return ade7754_spi_write_reg_8(dev, ADE7754_OPMODE, val); } diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c index 7eef8b9573fc..dbceda1e67ea 100644 --- a/drivers/staging/iio/meter/ade7759.c +++ b/drivers/staging/iio/meter/ade7759.c @@ -215,11 +215,15 @@ error_ret: static int ade7759_reset(struct device *dev) { + int ret; u16 val; - ade7759_spi_read_reg_16(dev, + ret = ade7759_spi_read_reg_16(dev, ADE7759_MODE, &val); + if (ret < 0) + return ret; + val |= 1 << 6; /* Software Chip Reset */ return ade7759_spi_write_reg_16(dev, ADE7759_MODE, @@ -298,11 +302,18 @@ error_ret: /* Power down the device */ static int ade7759_stop_device(struct device *dev) { + int ret; u16 val; - ade7759_spi_read_reg_16(dev, + ret = ade7759_spi_read_reg_16(dev, ADE7759_MODE, &val); + if (ret < 0) { + dev_err(dev, "unable to power down the device, error: %d\n", + ret); + return ret; + } + val |= 1 << 4; /* AD converters can be turned off */ return ade7759_spi_write_reg_16(dev, ADE7759_MODE, val); diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c index 5b1daeacac7a..7bc3e4a73834 100644 --- a/drivers/staging/iio/resolver/ad2s1210.c +++ b/drivers/staging/iio/resolver/ad2s1210.c @@ -198,7 +198,7 @@ static ssize_t ad2s1210_show_fclkin(struct device *dev, { struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - return sprintf(buf, "%d\n", st->fclkin); + return sprintf(buf, "%u\n", st->fclkin); } static ssize_t ad2s1210_store_fclkin(struct device *dev, @@ -237,7 +237,7 @@ static ssize_t ad2s1210_show_fexcit(struct device *dev, { struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev)); - return sprintf(buf, "%d\n", st->fexcit); + return sprintf(buf, "%u\n", st->fexcit); } static ssize_t ad2s1210_store_fexcit(struct device *dev, diff --git a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c index a24caf73ae0b..89df1d32874d 100644 --- a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c +++ b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c @@ -24,7 +24,7 @@ static DEFINE_MUTEX(iio_prtc_trigger_list_lock); struct iio_prtc_trigger_info { struct rtc_device *rtc; - int frequency; + unsigned int frequency; struct rtc_task task; bool state; }; @@ -36,7 +36,7 @@ static int iio_trig_periodic_rtc_set_state(struct iio_trigger *trig, bool state) if (trig_info->frequency == 0 && state) return -EINVAL; - dev_dbg(&trig_info->rtc->dev, "trigger frequency is %d\n", + dev_dbg(&trig_info->rtc->dev, "trigger frequency is %u\n", trig_info->frequency); ret = rtc_irq_set_state(trig_info->rtc, &trig_info->task, state); if (ret == 0) @@ -62,10 +62,10 @@ static ssize_t iio_trig_periodic_write_freq(struct device *dev, { struct iio_trigger *trig = to_iio_trigger(dev); struct iio_prtc_trigger_info *trig_info = iio_trigger_get_drvdata(trig); - int val; + unsigned int val; int ret; - ret = kstrtoint(buf, 10, &val); + ret = kstrtouint(buf, 10, &val); if (ret) goto error_ret; @@ -74,10 +74,8 @@ static ssize_t iio_trig_periodic_write_freq(struct device *dev, if (ret == 0 && trig_info->state && trig_info->frequency == 0) ret = rtc_irq_set_state(trig_info->rtc, &trig_info->task, 1); - } else if (val == 0) { - ret = rtc_irq_set_state(trig_info->rtc, &trig_info->task, 0); } else - ret = -EINVAL; + ret = rtc_irq_set_state(trig_info->rtc, &trig_info->task, 0); if (ret) goto error_ret; diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h index 03fa332ad2a8..8ad87d1c5340 100644 --- a/include/linux/iio/events.h +++ b/include/linux/iio/events.h @@ -9,22 +9,8 @@ #ifndef _IIO_EVENTS_H_ #define _IIO_EVENTS_H_ -#include <linux/ioctl.h> -#include <linux/types.h> #include <linux/iio/types.h> - -/** - * struct iio_event_data - The actual event being pushed to userspace - * @id: event identifier - * @timestamp: best estimate of time of event occurrence (often from - * the interrupt handler) - */ -struct iio_event_data { - __u64 id; - __s64 timestamp; -}; - -#define IIO_GET_EVENT_FD_IOCTL _IOR('i', 0x90, int) +#include <uapi/linux/iio/events.h> /** * IIO_EVENT_CODE() - create event identifier @@ -70,18 +56,4 @@ struct iio_event_data { #define IIO_UNMOD_EVENT_CODE(chan_type, number, type, direction) \ IIO_EVENT_CODE(chan_type, 0, 0, direction, type, number, 0, 0) -#define IIO_EVENT_CODE_EXTRACT_TYPE(mask) ((mask >> 56) & 0xFF) - -#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0x7F) - -#define IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(mask) ((mask >> 32) & 0xFF) - -/* Event code number extraction depends on which type of event we have. - * Perhaps review this function in the future*/ -#define IIO_EVENT_CODE_EXTRACT_CHAN(mask) ((__s16)(mask & 0xFFFF)) -#define IIO_EVENT_CODE_EXTRACT_CHAN2(mask) ((__s16)(((mask) >> 16) & 0xFFFF)) - -#define IIO_EVENT_CODE_EXTRACT_MODIFIER(mask) ((mask >> 40) & 0xFF) -#define IIO_EVENT_CODE_EXTRACT_DIFF(mask) (((mask) >> 55) & 0x1) - #endif diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 580ed5bdb3fa..942b6de68e2f 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -10,76 +10,7 @@ #ifndef _IIO_TYPES_H_ #define _IIO_TYPES_H_ -enum iio_chan_type { - IIO_VOLTAGE, - IIO_CURRENT, - IIO_POWER, - IIO_ACCEL, - IIO_ANGL_VEL, - IIO_MAGN, - IIO_LIGHT, - IIO_INTENSITY, - IIO_PROXIMITY, - IIO_TEMP, - IIO_INCLI, - IIO_ROT, - IIO_ANGL, - IIO_TIMESTAMP, - IIO_CAPACITANCE, - IIO_ALTVOLTAGE, - IIO_CCT, - IIO_PRESSURE, - IIO_HUMIDITYRELATIVE, - IIO_ACTIVITY, - IIO_STEPS, - IIO_ENERGY, - IIO_DISTANCE, - IIO_VELOCITY, -}; - -enum iio_modifier { - IIO_NO_MOD, - IIO_MOD_X, - IIO_MOD_Y, - IIO_MOD_Z, - IIO_MOD_X_AND_Y, - IIO_MOD_X_AND_Z, - IIO_MOD_Y_AND_Z, - IIO_MOD_X_AND_Y_AND_Z, - IIO_MOD_X_OR_Y, - IIO_MOD_X_OR_Z, - IIO_MOD_Y_OR_Z, - IIO_MOD_X_OR_Y_OR_Z, - IIO_MOD_LIGHT_BOTH, - IIO_MOD_LIGHT_IR, - IIO_MOD_ROOT_SUM_SQUARED_X_Y, - IIO_MOD_SUM_SQUARED_X_Y_Z, - IIO_MOD_LIGHT_CLEAR, - IIO_MOD_LIGHT_RED, - IIO_MOD_LIGHT_GREEN, - IIO_MOD_LIGHT_BLUE, - IIO_MOD_QUATERNION, - IIO_MOD_TEMP_AMBIENT, - IIO_MOD_TEMP_OBJECT, - IIO_MOD_NORTH_MAGN, - IIO_MOD_NORTH_TRUE, - IIO_MOD_NORTH_MAGN_TILT_COMP, - IIO_MOD_NORTH_TRUE_TILT_COMP, - IIO_MOD_RUNNING, - IIO_MOD_JOGGING, - IIO_MOD_WALKING, - IIO_MOD_STILL, - IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z, -}; - -enum iio_event_type { - IIO_EV_TYPE_THRESH, - IIO_EV_TYPE_MAG, - IIO_EV_TYPE_ROC, - IIO_EV_TYPE_THRESH_ADAPTIVE, - IIO_EV_TYPE_MAG_ADAPTIVE, - IIO_EV_TYPE_CHANGE, -}; +#include <uapi/linux/iio/types.h> enum iio_event_info { IIO_EV_INFO_ENABLE, @@ -88,13 +19,6 @@ enum iio_event_info { IIO_EV_INFO_PERIOD, }; -enum iio_event_direction { - IIO_EV_DIR_EITHER, - IIO_EV_DIR_RISING, - IIO_EV_DIR_FALLING, - IIO_EV_DIR_NONE, -}; - #define IIO_VAL_INT 1 #define IIO_VAL_INT_PLUS_MICRO 2 #define IIO_VAL_INT_PLUS_NANO 3 diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 68ceb97c458c..38df23435ebb 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -6,6 +6,7 @@ header-y += caif/ header-y += dvb/ header-y += hdlc/ header-y += hsi/ +header-y += iio/ header-y += isdn/ header-y += mmc/ header-y += nfsd/ diff --git a/include/uapi/linux/iio/Kbuild b/include/uapi/linux/iio/Kbuild new file mode 100644 index 000000000000..86f76d84c44f --- /dev/null +++ b/include/uapi/linux/iio/Kbuild @@ -0,0 +1,3 @@ +# UAPI Header export list +header-y += events.h +header-y += types.h diff --git a/include/uapi/linux/iio/events.h b/include/uapi/linux/iio/events.h new file mode 100644 index 000000000000..00bbdaed2f97 --- /dev/null +++ b/include/uapi/linux/iio/events.h @@ -0,0 +1,42 @@ +/* The industrial I/O - event passing to userspace + * + * Copyright (c) 2008-2011 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _UAPI_IIO_EVENTS_H_ +#define _UAPI_IIO_EVENTS_H_ + +#include <linux/ioctl.h> +#include <linux/types.h> + +/** + * struct iio_event_data - The actual event being pushed to userspace + * @id: event identifier + * @timestamp: best estimate of time of event occurrence (often from + * the interrupt handler) + */ +struct iio_event_data { + __u64 id; + __s64 timestamp; +}; + +#define IIO_GET_EVENT_FD_IOCTL _IOR('i', 0x90, int) + +#define IIO_EVENT_CODE_EXTRACT_TYPE(mask) ((mask >> 56) & 0xFF) + +#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0x7F) + +#define IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(mask) ((mask >> 32) & 0xFF) + +/* Event code number extraction depends on which type of event we have. + * Perhaps review this function in the future*/ +#define IIO_EVENT_CODE_EXTRACT_CHAN(mask) ((__s16)(mask & 0xFFFF)) +#define IIO_EVENT_CODE_EXTRACT_CHAN2(mask) ((__s16)(((mask) >> 16) & 0xFFFF)) + +#define IIO_EVENT_CODE_EXTRACT_MODIFIER(mask) ((mask >> 40) & 0xFF) +#define IIO_EVENT_CODE_EXTRACT_DIFF(mask) (((mask) >> 55) & 0x1) + +#endif /* _UAPI_IIO_EVENTS_H_ */ diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h new file mode 100644 index 000000000000..5c4601935005 --- /dev/null +++ b/include/uapi/linux/iio/types.h @@ -0,0 +1,92 @@ +/* industrial I/O data types needed both in and out of kernel + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _UAPI_IIO_TYPES_H_ +#define _UAPI_IIO_TYPES_H_ + +enum iio_chan_type { + IIO_VOLTAGE, + IIO_CURRENT, + IIO_POWER, + IIO_ACCEL, + IIO_ANGL_VEL, + IIO_MAGN, + IIO_LIGHT, + IIO_INTENSITY, + IIO_PROXIMITY, + IIO_TEMP, + IIO_INCLI, + IIO_ROT, + IIO_ANGL, + IIO_TIMESTAMP, + IIO_CAPACITANCE, + IIO_ALTVOLTAGE, + IIO_CCT, + IIO_PRESSURE, + IIO_HUMIDITYRELATIVE, + IIO_ACTIVITY, + IIO_STEPS, + IIO_ENERGY, + IIO_DISTANCE, + IIO_VELOCITY, +}; + +enum iio_modifier { + IIO_NO_MOD, + IIO_MOD_X, + IIO_MOD_Y, + IIO_MOD_Z, + IIO_MOD_X_AND_Y, + IIO_MOD_X_AND_Z, + IIO_MOD_Y_AND_Z, + IIO_MOD_X_AND_Y_AND_Z, + IIO_MOD_X_OR_Y, + IIO_MOD_X_OR_Z, + IIO_MOD_Y_OR_Z, + IIO_MOD_X_OR_Y_OR_Z, + IIO_MOD_LIGHT_BOTH, + IIO_MOD_LIGHT_IR, + IIO_MOD_ROOT_SUM_SQUARED_X_Y, + IIO_MOD_SUM_SQUARED_X_Y_Z, + IIO_MOD_LIGHT_CLEAR, + IIO_MOD_LIGHT_RED, + IIO_MOD_LIGHT_GREEN, + IIO_MOD_LIGHT_BLUE, + IIO_MOD_QUATERNION, + IIO_MOD_TEMP_AMBIENT, + IIO_MOD_TEMP_OBJECT, + IIO_MOD_NORTH_MAGN, + IIO_MOD_NORTH_TRUE, + IIO_MOD_NORTH_MAGN_TILT_COMP, + IIO_MOD_NORTH_TRUE_TILT_COMP, + IIO_MOD_RUNNING, + IIO_MOD_JOGGING, + IIO_MOD_WALKING, + IIO_MOD_STILL, + IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z, +}; + +enum iio_event_type { + IIO_EV_TYPE_THRESH, + IIO_EV_TYPE_MAG, + IIO_EV_TYPE_ROC, + IIO_EV_TYPE_THRESH_ADAPTIVE, + IIO_EV_TYPE_MAG_ADAPTIVE, + IIO_EV_TYPE_CHANGE, +}; + +enum iio_event_direction { + IIO_EV_DIR_EITHER, + IIO_EV_DIR_RISING, + IIO_EV_DIR_FALLING, + IIO_EV_DIR_NONE, +}; + +#endif /* _UAPI_IIO_TYPES_H_ */ + diff --git a/tools/iio/Makefile b/tools/iio/Makefile new file mode 100644 index 000000000000..bf7ae6d6612a --- /dev/null +++ b/tools/iio/Makefile @@ -0,0 +1,16 @@ +CC = gcc +CFLAGS = -Wall -g -D_GNU_SOURCE + +all: iio_event_monitor lsiio generic_buffer + +iio_event_monitor: iio_event_monitor.o iio_utils.o + +lsiio: lsiio.o iio_utils.o + +generic_buffer: generic_buffer.o iio_utils.o + +%.o: %.c iio_utils.h + +.PHONY: clean +clean: + rm -f *.o iio_event_monitor lsiio generic_buffer diff --git a/drivers/staging/iio/Documentation/generic_buffer.c b/tools/iio/generic_buffer.c index 59b250545d4c..f805493be3eb 100644 --- a/drivers/staging/iio/Documentation/generic_buffer.c +++ b/tools/iio/generic_buffer.c @@ -18,9 +18,8 @@ * */ -#define _GNU_SOURCE - #include <unistd.h> +#include <stdlib.h> #include <dirent.h> #include <fcntl.h> #include <stdio.h> diff --git a/drivers/staging/iio/Documentation/iio_event_monitor.c b/tools/iio/iio_event_monitor.c index 72c96aa6e992..427c271ac0d6 100644 --- a/drivers/staging/iio/Documentation/iio_event_monitor.c +++ b/tools/iio/iio_event_monitor.c @@ -16,9 +16,8 @@ * */ -#define _GNU_SOURCE - #include <unistd.h> +#include <stdlib.h> #include <stdbool.h> #include <stdio.h> #include <errno.h> @@ -28,6 +27,7 @@ #include <sys/ioctl.h> #include "iio_utils.h" #include <linux/iio/events.h> +#include <linux/iio/types.h> static const char * const iio_chan_type_name_spec[] = { [IIO_VOLTAGE] = "voltage", diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/tools/iio/iio_utils.c index bd6982c12d0d..2680a2e0f113 100644 --- a/drivers/staging/iio/Documentation/iio_utils.h +++ b/tools/iio/iio_utils.c @@ -11,17 +11,12 @@ #include <string.h> #include <stdlib.h> -#include <ctype.h> #include <stdio.h> #include <stdint.h> #include <dirent.h> #include <errno.h> - -/* Made up value to limit allocation sizes */ -#define IIO_MAX_NAME_LENGTH 30 - -#define FORMAT_SCAN_ELEMENTS_DIR "%s/scan_elements" -#define FORMAT_TYPE_FILE "%s_type" +#include <ctype.h> +#include "iio_utils.h" const char *iio_dir = "/sys/bus/iio/devices/"; @@ -30,7 +25,7 @@ const char *iio_dir = "/sys/bus/iio/devices/"; * @full_name: the full channel name * @generic_name: the output generic channel name **/ -inline int iioutils_break_up_name(const char *full_name, +int iioutils_break_up_name(const char *full_name, char **generic_name) { char *current; @@ -57,33 +52,6 @@ inline int iioutils_break_up_name(const char *full_name, } /** - * struct iio_channel_info - information about a given channel - * @name: channel name - * @generic_name: general name for channel type - * @scale: scale factor to be applied for conversion to si units - * @offset: offset to be applied for conversion to si units - * @index: the channel index in the buffer output - * @bytes: number of bytes occupied in buffer output - * @mask: a bit mask for the raw output - * @is_signed: is the raw value stored signed - * @enabled: is this channel enabled - **/ -struct iio_channel_info { - char *name; - char *generic_name; - float scale; - float offset; - unsigned index; - unsigned bytes; - unsigned bits_used; - unsigned shift; - uint64_t mask; - unsigned be; - unsigned is_signed; - unsigned location; -}; - -/** * iioutils_get_type() - find and process _type attribute data * @is_signed: output whether channel is signed * @bytes: output how many bytes the channel storage occupies @@ -93,7 +61,7 @@ struct iio_channel_info { * @name: the channel name * @generic_name: the channel type name **/ -inline int iioutils_get_type(unsigned *is_signed, +int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used, unsigned *shift, @@ -197,7 +165,7 @@ error_ret: return ret; } -inline int iioutils_get_param_float(float *output, +int iioutils_get_param_float(float *output, const char *param_name, const char *device_dir, const char *name, @@ -261,7 +229,7 @@ error_ret: * **/ -inline void bsort_channel_array_by_index(struct iio_channel_info **ci_array, +void bsort_channel_array_by_index(struct iio_channel_info **ci_array, int cnt) { @@ -282,7 +250,7 @@ inline void bsort_channel_array_by_index(struct iio_channel_info **ci_array, * @device_dir: the IIO device directory in sysfs * @ **/ -inline int build_channel_array(const char *device_dir, +int build_channel_array(const char *device_dir, struct iio_channel_info **ci_array, int *counter) { @@ -445,7 +413,7 @@ error_ret: * * Typical types this is used for are device and trigger. **/ -inline int find_type_by_name(const char *name, const char *type) +int find_type_by_name(const char *name, const char *type) { const struct dirent *ent; int number, numstrlen; @@ -504,7 +472,7 @@ inline int find_type_by_name(const char *name, const char *type) return -ENODEV; } -inline int _write_sysfs_int(char *filename, char *basedir, int val, int verify) +int _write_sysfs_int(char *filename, char *basedir, int val, int verify) { int ret = 0; FILE *sysfsfp; diff --git a/tools/iio/iio_utils.h b/tools/iio/iio_utils.h new file mode 100644 index 000000000000..1bc837b2d769 --- /dev/null +++ b/tools/iio/iio_utils.h @@ -0,0 +1,71 @@ +#ifndef _IIO_UTILS_H_ +#define _IIO_UTILS_H_ + +/* IIO - useful set of util functionality + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <stdint.h> + +/* Made up value to limit allocation sizes */ +#define IIO_MAX_NAME_LENGTH 30 + +#define FORMAT_SCAN_ELEMENTS_DIR "%s/scan_elements" +#define FORMAT_TYPE_FILE "%s_type" + +extern const char *iio_dir; + +/** + * struct iio_channel_info - information about a given channel + * @name: channel name + * @generic_name: general name for channel type + * @scale: scale factor to be applied for conversion to si units + * @offset: offset to be applied for conversion to si units + * @index: the channel index in the buffer output + * @bytes: number of bytes occupied in buffer output + * @mask: a bit mask for the raw output + * @is_signed: is the raw value stored signed + * @enabled: is this channel enabled + **/ +struct iio_channel_info { + char *name; + char *generic_name; + float scale; + float offset; + unsigned index; + unsigned bytes; + unsigned bits_used; + unsigned shift; + uint64_t mask; + unsigned be; + unsigned is_signed; + unsigned location; +}; + +int iioutils_break_up_name(const char *full_name, char **generic_name); +int iioutils_get_type(unsigned *is_signed, unsigned *bytes, + unsigned *bits_used, unsigned *shift, + uint64_t *mask, unsigned *be, + const char *device_dir, const char *name, + const char *generic_name); +int iioutils_get_param_float(float *output, const char *param_name, + const char *device_dir, const char *name, + const char *generic_name); +void bsort_channel_array_by_index(struct iio_channel_info **ci_array, int cnt); +int build_channel_array(const char *device_dir, + struct iio_channel_info **ci_array, int *counter); +int find_type_by_name(const char *name, const char *type); +int write_sysfs_int(char *filename, char *basedir, int val); +int write_sysfs_int_and_verify(char *filename, char *basedir, int val); +int write_sysfs_string_and_verify(char *filename, char *basedir, char *val); +int write_sysfs_string(char *filename, char *basedir, char *val); +int read_sysfs_posint(char *filename, char *basedir); +int read_sysfs_float(char *filename, char *basedir, float *val); +int read_sysfs_string(const char *filename, const char *basedir, char *str); + +#endif /* _IIO_UTILS_H_ */ diff --git a/drivers/staging/iio/Documentation/lsiio.c b/tools/iio/lsiio.c index 98a0de098130..c585440f864e 100644 --- a/drivers/staging/iio/Documentation/lsiio.c +++ b/tools/iio/lsiio.c @@ -95,12 +95,7 @@ static int dump_one_trigger(const char *dev_dir_name) static void dump_devices(void) { const struct dirent *ent; - int number, numstrlen; - - FILE *nameFile; DIR *dp; - char thisname[IIO_MAX_NAME_LENGTH]; - char *filename; dp = opendir(iio_dir); if (dp == NULL) { |