diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt')
-rw-r--r-- | Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 12 |
1 files changed, 4 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index c149fadc6f47..fc5c22e81c61 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -89,7 +89,7 @@ Required properties: "fsl,imx8qm-clock" "fsl,imx8qxp-clock" followed by "fsl,scu-clk" -- #clock-cells: Should be 1. Contains the Clock ID value. +- #clock-cells: Should be 2: Contains the Resource and Clock ID value. - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names - clock-names: Should include entries "xtal_32KHz", "xtal_24MHz" @@ -97,9 +97,6 @@ Required properties: The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. -See the full list of clock IDs from: -include/dt-bindings/clock/imx8qxp-clock.h - Pinctrl bindings based on SCU Message Protocol ------------------------------------------------------------ @@ -186,7 +183,7 @@ firmware { clk: clk { compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; - #clock-cells = <1>; + #clock-cells = <2>; }; iomuxc { @@ -231,8 +228,7 @@ serial@5a060000 { ... pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; - clocks = <&clk IMX8QXP_UART0_CLK>, - <&clk IMX8QXP_UART0_IPG_CLK>; - clock-names = "per", "ipg"; + clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; + clock-names = "ipg"; power-domains = <&pd IMX_SC_R_UART_0>; }; |