diff options
Diffstat (limited to 'Documentation/devicetree/bindings/ata/imx-sata.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/ata/imx-sata.txt | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt index fa511db18408..49c4135dd9f2 100644 --- a/Documentation/devicetree/bindings/ata/imx-sata.txt +++ b/Documentation/devicetree/bindings/ata/imx-sata.txt @@ -7,6 +7,7 @@ Required properties: - compatible : should be one of the following: - "fsl,imx53-ahci" for i.MX53 SATA controller - "fsl,imx6q-ahci" for i.MX6Q SATA controller + - "fsl,imx8qm-ahci" for i.MX8QM SATA controller - interrupts : interrupt mapping for SATA IRQ - reg : registers mapping - clocks : list of clock specifiers, must contain an entry for each @@ -22,6 +23,9 @@ Optional properties: for the list of legal values for these options. - fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA link. +- fsl,phy-imp: PHY impedance ratio value refer to the differnt HW design. + Set it to 0x6c when 85OHM is used, keep it to default value 0x80 when + 100OHM is used. Examples: |