diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt')
-rw-r--r-- | Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 13 |
1 files changed, 12 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 3c9a57a8443b..80174b587df3 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -9,6 +9,7 @@ Required properties: "fsl,imx53-sdma" "fsl,imx6q-sdma" "fsl,imx7d-sdma" + "fsl,imx8mq-sdma" The -to variants should be preferred since they allow to determine the correct ROM script addresses needed for the driver to work without additional firmware. @@ -50,8 +51,14 @@ The full ID of peripheral types can be found below. 22 SSI Dual FIFO (needs firmware ver >= 2) 23 Shared ASRC 24 SAI + 25 HDMI Audio -The third cell specifies the transfer priority as below. +The third cell specifies the transfer priority and software done +as below. + + Bit31: sw_done + Bit15~Bit8: selector + Bit7~Bit0: priority level ID transfer priority ------------------------- @@ -59,6 +66,9 @@ The third cell specifies the transfer priority as below. 1 Medium 2 Low +For example: 0x80000000 means sw_done enabled for done0 sector and + High priority for PDM on i.mx8mm. + Optional properties: - gpr : The phandle to the General Purpose Register (GPR) node. @@ -67,6 +77,7 @@ Optional properties: reg is the GPR register offset. shift is the bit position inside the GPR register. val is the value of the bit (0 or 1). +- fsl,ratio-1-1: AHB/SDMA core clock ration 1:1, 2:1 without this. Examples: |