summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/marvell.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/marvell.txt')
-rw-r--r--Documentation/devicetree/bindings/marvell.txt8
1 files changed, 0 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt
index f7a0da6b4022..ea2b16ced49b 100644
--- a/Documentation/devicetree/bindings/marvell.txt
+++ b/Documentation/devicetree/bindings/marvell.txt
@@ -79,7 +79,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Required properties:
- #address-cells : Should be <1>
- #size-cells : Should be <0>
- - device_type : Should be "mdio"
- compatible : Should be "marvell,mv64360-mdio"
Example:
@@ -87,7 +86,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
mdio {
#address-cells = <1>;
#size-cells = <0>;
- device_type = "mdio";
compatible = "marvell,mv64360-mdio";
ethernet-phy@0 {
@@ -132,7 +130,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Ethernet port node
Required properties:
- - device_type : Should be "network".
- compatible : Should be "marvell,mv64360-eth".
- reg : Should be <0>, <1>, or <2>, according to which registers
within the silicon block the device uses.
@@ -145,7 +142,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Example Discovery Ethernet port node:
ethernet@0 {
- device_type = "network";
compatible = "marvell,mv64360-eth";
reg = <0>;
interrupts = <32>;
@@ -159,7 +155,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
c) Marvell Discovery PHY nodes
Required properties:
- - device_type : Should be "ethernet-phy"
- interrupts : <a> where a is the interrupt number for this phy.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
@@ -167,7 +162,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Example Discovery PHY node:
ethernet-phy@1 {
- device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
@@ -271,7 +265,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
serial port.
Required properties:
- - device_type : "serial"
- compatible : "marvell,mv64360-mpsc"
- reg : Offset and length of the register set for this device
- sdma : the phandle for the SDMA node used by this port
@@ -288,7 +281,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
Example Discovery MPSCINTR node:
mpsc@8000 {
- device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xf1008000>;