summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/amd-xgbe-phy.txt')
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe-phy.txt48
1 files changed, 0 insertions, 48 deletions
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
deleted file mode 100644
index 8db32384a486..000000000000
--- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* AMD 10GbE PHY driver (amd-xgbe-phy)
-
-Required properties:
-- compatible: Should be "amd,xgbe-phy-seattle-v1a" and
- "ethernet-phy-ieee802.3-c45"
-- reg: Address and length of the register sets for the device
- - SerDes Rx/Tx registers
- - SerDes integration registers (1/2)
- - SerDes integration registers (2/2)
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
-- interrupts: Should contain the amd-xgbe-phy interrupt.
-
-Optional properties:
-- amd,speed-set: Speed capabilities of the device
- 0 - 1GbE and 10GbE (default)
- 1 - 2.5GbE and 10GbE
-
-The following optional properties are represented by an array with each
-value corresponding to a particular speed. The first array value represents
-the setting for the 1GbE speed, the second value for the 2.5GbE speed and
-the third value for the 10GbE speed. All three values are required if the
-property is used.
-- amd,serdes-blwc: Baseline wandering correction enablement
- 0 - Off
- 1 - On
-- amd,serdes-cdr-rate: CDR rate speed selection
-- amd,serdes-pq-skew: PQ (data sampling) skew
-- amd,serdes-tx-amp: TX amplitude boost
-- amd,serdes-dfe-tap-config: DFE taps available to run
-- amd,serdes-dfe-tap-enable: DFE taps to enable
-
-Example:
- xgbe_phy@e1240800 {
- compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
- reg = <0 0xe1240800 0 0x00400>,
- <0 0xe1250000 0 0x00060>,
- <0 0xe1250080 0 0x00004>;
- interrupt-parent = <&gic>;
- interrupts = <0 323 4>;
- amd,speed-set = <0>;
- amd,serdes-blwc = <1>, <1>, <0>;
- amd,serdes-cdr-rate = <2>, <2>, <7>;
- amd,serdes-pq-skew = <10>, <10>, <30>;
- amd,serdes-tx-amp = <15>, <15>, <10>;
- amd,serdes-dfe-tap-config = <3>, <3>, <1>;
- amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
- };