summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/nfc/pn544.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/nfc/pn544.txt')
-rw-r--r--Documentation/devicetree/bindings/net/nfc/pn544.txt35
1 files changed, 35 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
new file mode 100644
index 000000000000..dab69f36167c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -0,0 +1,35 @@
+* NXP Semiconductors PN544 NFC Controller
+
+Required properties:
+- compatible: Should be "nxp,pn544-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
+- firmware-gpios: Output GPIO pin used to enter firmware download mode
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with PN544 on I2C2):
+
+&i2c2 {
+
+ status = "okay";
+
+ pn544: pn544@28 {
+
+ compatible = "nxp,pn544-i2c";
+
+ reg = <0x28>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 GPIO_ACTIVE_HIGH>;
+
+ enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ };
+};