diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/fsl/rcpm.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 35 |
1 files changed, 31 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt index e284e4e1ccd5..751a7655b694 100644 --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt @@ -5,7 +5,7 @@ and power management. Required properites: - reg : Offset and length of the register set of the RCPM block. - - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the + - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the fsl,rcpm-wakeup property. - compatible : Must contain a chip-specific RCPM block compatible string and (if applicable) may contain a chassis-version RCPM compatible @@ -20,6 +20,7 @@ Required properites: * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm + * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm All references to "1.0" and "2.0" refer to the QorIQ chassis version to which the chip complies. @@ -27,16 +28,42 @@ Chassis Version Example Chips --------------- ------------------------------- 1.0 p4080, p5020, p5040, p2041, p3041 2.0 t4240, b4860, b4420 -2.1 t1040, ls1021 +2.1 t1040, +2.1+ ls1021a, ls1012a, ls1043a, ls1046a + +Optional properties: + - little-endian : RCPM register block is Little Endian. Without it RCPM + will be Big Endian (default case). + - fsl,ippdexpcr1-alt-addr : The property is related to a hardware issue + on SoC LS1021A and only needed on SoC LS1021A. + Must include 1 + 2 entries. + The first entry must be a link to the SCFG device node. + The non-first entry must be offset of registers of SCFG. + The second and third entry compose an alt offset address + for IPPDEXPCR1(SCFG_SPARECR8) Example: The RCPM node for T4240: rcpm: global-utilities@e2000 { compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; reg = <0xe2000 0x1000>; - fsl,#rcpm-wakeup-cells = <2>; + #fsl,rcpm-wakeup-cells = <2>; }; +The RCPM node for LS1021A: + rcpm: rcpm@1ee2140 { + compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x8>; + #fsl,rcpm-wakeup-cells = <2>; + + /* + * The second and third entry compose an alt offset + * address for IPPDEXPCR1(SCFG_SPARECR8) + */ + fsl,ippdexpcr1-alt-addr = <&scfg 0x0 0x51c>; + }; + + * Freescale RCPM Wakeup Source Device Tree Bindings ------------------------------------------- Required fsl,rcpm-wakeup property should be added to a device node if the device @@ -44,7 +71,7 @@ can be used as a wakeup source. - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR register cells. The number of IPPDEXPCR register cells is defined in - "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is + "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is the bit mask that should be set in IPPDEXPCR0, and the second register cell is for IPPDEXPCR1, and so on. |