summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/wm8962.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/wm8962.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/wm8962.txt23
1 files changed, 23 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/wm8962.txt b/Documentation/devicetree/bindings/sound/wm8962.txt
index dceb3b1c2bb7..7f82b59ec8f9 100644
--- a/Documentation/devicetree/bindings/sound/wm8962.txt
+++ b/Documentation/devicetree/bindings/sound/wm8962.txt
@@ -8,9 +8,32 @@ Required properties:
- reg : the I2C address of the device.
+Optional properties:
+ - spk-mono: This is a boolean property. If present, the SPK_MONO bit
+ of R51 (Class D Control 2) gets set, indicating that the speaker is
+ in mono mode.
+
+ - mic-cfg : Default register value for R48 (Additional Control 4).
+ If absent, the default should be the register default.
+
+ - gpio-cfg : A list of GPIO configuration register values. The list must
+ be 6 entries long. If absent, no configuration of these registers is
+ performed. And note that only the value within [0x0, 0xffff] is valid.
+ Any other value is regarded as setting the GPIO register by its reset
+ value 0x0.
+
Example:
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
+
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0013 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x8014 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
};