summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/mfd/mfd.txt41
1 files changed, 41 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
new file mode 100644
index 000000000000..af9d6931a1a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -0,0 +1,41 @@
+Multi-Function Devices (MFD)
+
+These devices comprise a nexus for heterogeneous hardware blocks containing
+more than one non-unique yet varying hardware functionality.
+
+A typical MFD can be:
+
+- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management
+ Integrated Circuit) that is manufactured in a lower technology node (rough
+ silicon) that handles analog drivers for things like audio amplifiers, LED
+ drivers, level shifters, PHY (physical interfaces to things like USB or
+ ethernet), regulators etc.
+
+- A range of memory registers containing "miscellaneous system registers" also
+ known as a system controller "syscon" or any other memory range containing a
+ mix of unrelated hardware devices.
+
+Optional properties:
+
+- compatible : "simple-mfd" - this signifies that the operating system should
+ consider all subnodes of the MFD device as separate devices akin to how
+ "simple-bus" inidicates when to see subnodes as children for a simple
+ memory-mapped bus. For more complex devices, when the nexus driver has to
+ probe registers to figure out what child devices exist etc, this should not
+ be used. In the latter case the child devices will be determined by the
+ operating system.
+
+Example:
+
+foo@1000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x01000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "myled";
+ default-state = "on";
+ };
+};