diff options
Diffstat (limited to 'Documentation/usb/rio.txt')
| -rw-r--r-- | Documentation/usb/rio.txt | 138 |
1 files changed, 0 insertions, 138 deletions
diff --git a/Documentation/usb/rio.txt b/Documentation/usb/rio.txt deleted file mode 100644 index aee715af7db7..000000000000 --- a/Documentation/usb/rio.txt +++ /dev/null @@ -1,138 +0,0 @@ -Copyright (C) 1999, 2000 Bruce Tenison -Portions Copyright (C) 1999, 2000 David Nelson -Thanks to David Nelson for guidance and the usage of the scanner.txt -and scanner.c files to model our driver and this informative file. - -Mar. 2, 2000 - -CHANGES - -- Initial Revision - - -OVERVIEW - -This README will address issues regarding how to configure the kernel -to access a RIO 500 mp3 player. -Before I explain how to use this to access the Rio500 please be warned: - -W A R N I N G: --------------- - -Please note that this software is still under development. The authors -are in no way responsible for any damage that may occur, no matter how -inconsequential. - -It seems that the Rio has a problem when sending .mp3 with low batteries. -I suggest when the batteries are low and you want to transfer stuff that you -replace it with a fresh one. In my case, what happened is I lost two 16kb -blocks (they are no longer usable to store information to it). But I don't -know if that's normal or not; it could simply be a problem with the flash -memory. - -In an extreme case, I left my Rio playing overnight and the batteries wore -down to nothing and appear to have corrupted the flash memory. My RIO -needed to be replaced as a result. Diamond tech support is aware of the -problem. Do NOT allow your batteries to wear down to nothing before -changing them. It appears RIO 500 firmware does not handle low battery -power well at all. - -On systems with OHCI controllers, the kernel OHCI code appears to have -power on problems with some chipsets. If you are having problems -connecting to your RIO 500, try turning it on first and then plugging it -into the USB cable. - -Contact information: --------------------- - - The main page for the project is hosted at sourceforge.net in the following - URL: <http://rio500.sourceforge.net>. You can also go to the project's - sourceforge home page at: <http://sourceforge.net/projects/rio500/>. - There is also a mailing list: rio500-users@lists.sourceforge.net - -Authors: -------- - -Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith -Clayton <kclayton@jps.net> is incharge of the PPC port and making sure -things work there. Bruce Tenison <btenison@dibbs.net> is adding support -for .fon files and also does testing. The program will mostly sure be -re-written and Pete Ikusz along with the rest will re-design it. I would -also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use -with some important information regarding the communication with the Rio. - -ADDITIONAL INFORMATION and Userspace tools - -http://rio500.sourceforge.net/ - - -REQUIREMENTS - -A host with a USB port. Ideally, either a UHCI (Intel) or OHCI -(Compaq and others) hardware port should work. - -A Linux development kernel (2.3.x) with USB support enabled or a -backported version to linux-2.2.x. See http://www.linux-usb.org for -more information on accomplishing this. - -A Linux kernel with RIO 500 support enabled. - -'lspci' which is only needed to determine the type of USB hardware -available in your machine. - -CONFIGURATION - -Using `lspci -v`, determine the type of USB hardware available. - - If you see something like: - - USB Controller: ...... - Flags: ..... - I/O ports at .... - - Then you have a UHCI based controller. - - If you see something like: - - USB Controller: ..... - Flags: .... - Memory at ..... - - Then you have a OHCI based controller. - -Using `make menuconfig` or your preferred method for configuring the -kernel, select 'Support for USB', 'OHCI/UHCI' depending on your -hardware (determined from the steps above), 'USB Diamond Rio500 support', and -'Preliminary USB device filesystem'. Compile and install the modules -(you may need to execute `depmod -a` to update the module -dependencies). - -Add a device for the USB rio500: - `mknod /dev/usb/rio500 c 180 64` - -Set appropriate permissions for /dev/usb/rio500 (don't forget about -group and world permissions). Both read and write permissions are -required for proper operation. - -Load the appropriate modules (if compiled as modules): - - OHCI: - modprobe usbcore - modprobe usb-ohci - modprobe rio500 - - UHCI: - modprobe usbcore - modprobe usb-uhci (or uhci) - modprobe rio500 - -That's it. The Rio500 Utils at: http://rio500.sourceforge.net should -be able to access the rio500. - -BUGS - -If you encounter any problems feel free to drop me an email. - -Bruce Tenison -btenison@dibbs.net - |