diff options
Diffstat (limited to 'Documentation')
47 files changed, 5222 insertions, 1585 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 2a39aeba1464..d05737aaa84b 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -86,6 +86,8 @@ cachetlb.txt - describes the cache/TLB flushing interfaces Linux uses. cdrom/ - directory with information on the CD-ROM drivers that Linux has. +cgroups/ + - cgroups features, including cpusets and memory controller. connector/ - docs on the netlink based userspace<->kernel space communication mod. console/ @@ -98,8 +100,6 @@ cpu-load.txt - document describing how CPU load statistics are collected. cpuidle/ - info on CPU_IDLE, CPU idle state management subsystem. -cpusets.txt - - documents the cpusets feature; assign CPUs and Mem to a set of tasks. cputopology.txt - documentation on how CPU topology info is exported via sysfs. cris/ diff --git a/Documentation/ABI/testing/debugfs-kmemtrace b/Documentation/ABI/testing/debugfs-kmemtrace new file mode 100644 index 000000000000..5e6a92a02d85 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-kmemtrace @@ -0,0 +1,71 @@ +What: /sys/kernel/debug/kmemtrace/ +Date: July 2008 +Contact: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> +Description: + +In kmemtrace-enabled kernels, the following files are created: + +/sys/kernel/debug/kmemtrace/ + cpu<n> (0400) Per-CPU tracing data, see below. (binary) + total_overruns (0400) Total number of bytes which were dropped from + cpu<n> files because of full buffer condition, + non-binary. (text) + abi_version (0400) Kernel's kmemtrace ABI version. (text) + +Each per-CPU file should be read according to the relay interface. That is, +the reader should set affinity to that specific CPU and, as currently done by +the userspace application (though there are other methods), use poll() with +an infinite timeout before every read(). Otherwise, erroneous data may be +read. The binary data has the following _core_ format: + + Event ID (1 byte) Unsigned integer, one of: + 0 - represents an allocation (KMEMTRACE_EVENT_ALLOC) + 1 - represents a freeing of previously allocated memory + (KMEMTRACE_EVENT_FREE) + Type ID (1 byte) Unsigned integer, one of: + 0 - this is a kmalloc() / kfree() + 1 - this is a kmem_cache_alloc() / kmem_cache_free() + 2 - this is a __get_free_pages() et al. + Event size (2 bytes) Unsigned integer representing the + size of this event. Used to extend + kmemtrace. Discard the bytes you + don't know about. + Sequence number (4 bytes) Signed integer used to reorder data + logged on SMP machines. Wraparound + must be taken into account, although + it is unlikely. + Caller address (8 bytes) Return address to the caller. + Pointer to mem (8 bytes) Pointer to target memory area. Can be + NULL, but not all such calls might be + recorded. + +In case of KMEMTRACE_EVENT_ALLOC events, the next fields follow: + + Requested bytes (8 bytes) Total number of requested bytes, + unsigned, must not be zero. + Allocated bytes (8 bytes) Total number of actually allocated + bytes, unsigned, must not be lower + than requested bytes. + Requested flags (4 bytes) GFP flags supplied by the caller. + Target CPU (4 bytes) Signed integer, valid for event id 1. + If equal to -1, target CPU is the same + as origin CPU, but the reverse might + not be true. + +The data is made available in the same endianness the machine has. + +Other event ids and type ids may be defined and added. Other fields may be +added by increasing event size, but see below for details. +Every modification to the ABI, including new id definitions, are followed +by bumping the ABI version by one. + +Adding new data to the packet (features) is done at the end of the mandatory +data: + Feature size (2 byte) + Feature ID (1 byte) + Feature data (Feature size - 3 bytes) + + +Users: + kmemtrace-user - git://repo.or.cz/kmemtrace-user.git + diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index 873ef1fc1569..e091fa873792 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -4,8 +4,8 @@ KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Some regulator directories will contain a field called - state. This reports the regulator enable status, for - regulators which can report that value. + state. This reports the regulator enable control, for + regulators which can report that input value. This will be one of the following strings: @@ -14,16 +14,54 @@ Description: 'unknown' 'enabled' means the regulator output is ON and is supplying - power to the system. + power to the system (assuming no error prevents it). 'disabled' means the regulator output is OFF and is not - supplying power to the system.. + supplying power to the system (unless some non-Linux + control has enabled it). 'unknown' means software cannot determine the state, or the reported state is invalid. NOTE: this field can be used in conjunction with microvolts - and microamps to determine regulator output levels. + or microamps to determine configured regulator output levels. + + +What: /sys/class/regulator/.../status +Description: + Some regulator directories will contain a field called + "status". This reports the current regulator status, for + regulators which can report that output value. + + This will be one of the following strings: + + off + on + error + fast + normal + idle + standby + + "off" means the regulator is not supplying power to the + system. + + "on" means the regulator is supplying power to the system, + and the regulator can't report a detailed operation mode. + + "error" indicates an out-of-regulation status such as being + disabled due to thermal shutdown, or voltage being unstable + because of problems with the input power supply. + + "fast", "normal", "idle", and "standby" are all detailed + regulator operation modes (described elsewhere). They + imply "on", but provide more detail. + + Note that regulator status is a function of many inputs, + not limited to control inputs from Linux. For example, + the actual load presented may trigger "error" status; or + a regulator may be enabled by another user, even though + Linux did not enable it. What: /sys/class/regulator/.../type @@ -58,7 +96,7 @@ Description: Some regulator directories will contain a field called microvolts. This holds the regulator output voltage setting measured in microvolts (i.e. E-6 Volts), for regulators - which can report that voltage. + which can report the control input for voltage. NOTE: This value should not be used to determine the regulator output voltage level as this value is the same regardless of @@ -73,7 +111,7 @@ Description: Some regulator directories will contain a field called microamps. This holds the regulator output current limit setting measured in microamps (i.e. E-6 Amps), for regulators - which can report that current. + which can report the control input for a current limit. NOTE: This value should not be used to determine the regulator output current level as this value is the same regardless of @@ -87,7 +125,7 @@ Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: Some regulator directories will contain a field called opmode. This holds the current regulator operating mode, - for regulators which can report it. + for regulators which can report that control input value. The opmode value can be one of the following strings: @@ -101,7 +139,8 @@ Description: NOTE: This value should not be used to determine the regulator output operating mode as this value is the same regardless of - whether the regulator is enabled or disabled. + whether the regulator is enabled or disabled. A "status" + attribute may be available to determine the actual mode. What: /sys/class/regulator/.../min_microvolts diff --git a/Documentation/DocBook/.gitignore b/Documentation/DocBook/.gitignore index c102c02ecf89..c6def352fe39 100644 --- a/Documentation/DocBook/.gitignore +++ b/Documentation/DocBook/.gitignore @@ -4,3 +4,7 @@ *.html *.9.gz *.9 +*.aux +*.dvi +*.log +*.out diff --git a/Documentation/RCU/listRCU.txt b/Documentation/RCU/listRCU.txt index 1fd175368a87..4349c1487e91 100644 --- a/Documentation/RCU/listRCU.txt +++ b/Documentation/RCU/listRCU.txt @@ -118,7 +118,7 @@ Following are the RCU equivalents for these two functions: list_for_each_entry(e, list, list) { if (!audit_compare_rule(rule, &e->rule)) { list_del_rcu(&e->list); - call_rcu(&e->rcu, audit_free_rule, e); + call_rcu(&e->rcu, audit_free_rule); return 0; } } @@ -206,7 +206,7 @@ RCU ("read-copy update") its name. The RCU code is as follows: ne->rule.action = newaction; ne->rule.file_count = newfield_count; list_replace_rcu(e, ne); - call_rcu(&e->rcu, audit_free_rule, e); + call_rcu(&e->rcu, audit_free_rule); return 0; } } @@ -283,7 +283,7 @@ flag under the spinlock as follows: list_del_rcu(&e->list); e->deleted = 1; spin_unlock(&e->lock); - call_rcu(&e->rcu, audit_free_rule, e); + call_rcu(&e->rcu, audit_free_rule); return 0; } } diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt index 95821a29ae41..7aa2002ade77 100644 --- a/Documentation/RCU/rcu.txt +++ b/Documentation/RCU/rcu.txt @@ -81,7 +81,7 @@ o I hear that RCU needs work in order to support realtime kernels? This work is largely completed. Realtime-friendly RCU can be enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter. However, work is in progress for enabling priority boosting of - preempted RCU read-side critical sections.This is needed if you + preempted RCU read-side critical sections. This is needed if you have CPU-bound realtime threads. o Where can I find more information on RCU? diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt index 239f542d48ba..6389dec33459 100644 --- a/Documentation/RCU/rculist_nulls.txt +++ b/Documentation/RCU/rculist_nulls.txt @@ -21,7 +21,7 @@ if (obj) { /* * Because a writer could delete object, and a writer could * reuse these object before the RCU grace period, we - * must check key after geting the reference on object + * must check key after getting the reference on object */ if (obj->key != key) { // not the object we expected put_ref(obj); @@ -117,7 +117,7 @@ a race (some writer did a delete and/or a move of an object to another chain) checking the final 'nulls' value if the lookup met the end of chain. If final 'nulls' value is not the slot number, then we must restart the lookup at -the begining. If the object was moved to same chain, +the beginning. If the object was moved to the same chain, then the reader doesnt care : It might eventually scan the list again without harm. diff --git a/Documentation/cgroups/00-INDEX b/Documentation/cgroups/00-INDEX new file mode 100644 index 000000000000..3f58fa3d6d00 --- /dev/null +++ b/Documentation/cgroups/00-INDEX @@ -0,0 +1,18 @@ +00-INDEX + - this file +cgroups.txt + - Control Groups definition, implementation details, examples and API. +cpuacct.txt + - CPU Accounting Controller; account CPU usage for groups of tasks. +cpusets.txt + - documents the cpusets feature; assign CPUs and Mem to a set of tasks. +devices.txt + - Device Whitelist Controller; description, interface and security. +freezer-subsystem.txt + - checkpointing; rationale to not use signals, interface. +memcg_test.txt + - Memory Resource Controller; implementation details. +memory.txt + - Memory Resource Controller; design, accounting, interface, testing. +resource_counter.txt + - Resource Counter API. diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index 93feb8444489..6eb1a97e88ce 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -56,7 +56,7 @@ hierarchy, and a set of subsystems; each subsystem has system-specific state attached to each cgroup in the hierarchy. Each hierarchy has an instance of the cgroup virtual filesystem associated with it. -At any one time there may be multiple active hierachies of task +At any one time there may be multiple active hierarchies of task cgroups. Each hierarchy is a partition of all tasks in the system. User level code may create and destroy cgroups by name in an @@ -124,10 +124,10 @@ following lines: / \ Prof (15%) students (5%) -Browsers like firefox/lynx go into the WWW network class, while (k)nfsd go +Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go into NFS network class. -At the same time firefox/lynx will share an appropriate CPU/Memory class +At the same time Firefox/Lynx will share an appropriate CPU/Memory class depending on who launched it (prof/student). With the ability to classify tasks differently for different resources @@ -325,7 +325,7 @@ and then start a subshell 'sh' in that cgroup: Creating, modifying, using the cgroups can be done through the cgroup virtual filesystem. -To mount a cgroup hierarchy will all available subsystems, type: +To mount a cgroup hierarchy with all available subsystems, type: # mount -t cgroup xxx /dev/cgroup The "xxx" is not interpreted by the cgroup code, but will appear in @@ -333,12 +333,23 @@ The "xxx" is not interpreted by the cgroup code, but will appear in To mount a cgroup hierarchy with just the cpuset and numtasks subsystems, type: -# mount -t cgroup -o cpuset,numtasks hier1 /dev/cgroup +# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup To change the set of subsystems bound to a mounted hierarchy, just remount with different options: +# mount -o remount,cpuset,ns hier1 /dev/cgroup -# mount -o remount,cpuset,ns /dev/cgroup +Now memory is removed from the hierarchy and ns is added. + +Note this will add ns to the hierarchy but won't remove memory or +cpuset, because the new options are appended to the old ones: +# mount -o remount,ns /dev/cgroup + +To Specify a hierarchy's release_agent: +# mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \ + xxx /dev/cgroup + +Note that specifying 'release_agent' more than once will return failure. Note that changing the set of subsystems is currently only supported when the hierarchy consists of a single (root) cgroup. Supporting @@ -349,6 +360,11 @@ Then under /dev/cgroup you can find a tree that corresponds to the tree of the cgroups in the system. For instance, /dev/cgroup is the cgroup that holds the whole system. +If you want to change the value of release_agent: +# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent + +It can also be changed via remount. + If you want to create a new cgroup under /dev/cgroup: # cd /dev/cgroup # mkdir my_cgroup @@ -476,11 +492,13 @@ cgroup->parent is still valid. (Note - can also be called for a newly-created cgroup if an error occurs after this subsystem's create() method has been called for the new cgroup). -void pre_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp); +int pre_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp); Called before checking the reference count on each subsystem. This may be useful for subsystems which have some extra references even if -there are not tasks in the cgroup. +there are not tasks in the cgroup. If pre_destroy() returns error code, +rmdir() will fail with it. From this behavior, pre_destroy() can be +called multiple times against a cgroup. int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp, struct task_struct *task) @@ -521,7 +539,7 @@ always handled well. void post_clone(struct cgroup_subsys *ss, struct cgroup *cgrp) (cgroup_mutex held by caller) -Called at the end of cgroup_clone() to do any paramater +Called at the end of cgroup_clone() to do any parameter initialization which might be required before a task could attach. For example in cpusets, no task may attach before 'cpus' and 'mems' are set up. diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 0611e9528c7c..f9ca389dddf4 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -131,7 +131,7 @@ Cpusets extends these two mechanisms as follows: - The hierarchy of cpusets can be mounted at /dev/cpuset, for browsing and manipulation from user space. - A cpuset may be marked exclusive, which ensures that no other - cpuset (except direct ancestors and descendents) may contain + cpuset (except direct ancestors and descendants) may contain any overlapping CPUs or Memory Nodes. - You can list all the tasks (by pid) attached to any cpuset. @@ -226,7 +226,7 @@ nodes with memory--using the cpuset_track_online_nodes() hook. -------------------------------- If a cpuset is cpu or mem exclusive, no other cpuset, other than -a direct ancestor or descendent, may share any of the same CPUs or +a direct ancestor or descendant, may share any of the same CPUs or Memory Nodes. A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled", @@ -427,7 +427,7 @@ child cpusets have this flag enabled. When doing this, you don't usually want to leave any unpinned tasks in the top cpuset that might use non-trivial amounts of CPU, as such tasks may be artificially constrained to some subset of CPUs, depending on -the particulars of this flag setting in descendent cpusets. Even if +the particulars of this flag setting in descendant cpusets. Even if such a task could use spare CPU cycles in some other CPUs, the kernel scheduler might not consider the possibility of load balancing that task to that underused CPU. @@ -531,9 +531,9 @@ be idle. Of course it takes some searching cost to find movable tasks and/or idle CPUs, the scheduler might not search all CPUs in the domain -everytime. In fact, in some architectures, the searching ranges on +every time. In fact, in some architectures, the searching ranges on events are limited in the same socket or node where the CPU locates, -while the load balance on tick searchs all. +while the load balance on tick searches all. For example, assume CPU Z is relatively far from CPU X. Even if CPU Z is idle while CPU X and the siblings are busy, scheduler can't migrate @@ -601,7 +601,7 @@ its new cpuset, then the task will continue to use whatever subset of MPOL_BIND nodes are still allowed in the new cpuset. If the task was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed in the new cpuset, then the task will be essentially treated as if it -was MPOL_BIND bound to the new cpuset (even though its numa placement, +was MPOL_BIND bound to the new cpuset (even though its NUMA placement, as queried by get_mempolicy(), doesn't change). If a task is moved from one cpuset to another, then the kernel will adjust the tasks memory placement, as above, the next time that the kernel attempts diff --git a/Documentation/cgroups/devices.txt b/Documentation/cgroups/devices.txt index 7cc6e6a60672..57ca4c89fe5c 100644 --- a/Documentation/cgroups/devices.txt +++ b/Documentation/cgroups/devices.txt @@ -42,7 +42,7 @@ suffice, but we can decide the best way to adequately restrict movement as people get some experience with this. We may just want to require CAP_SYS_ADMIN, which at least is a separate bit from CAP_MKNOD. We may want to just refuse moving to a cgroup which -isn't a descendent of the current one. Or we may want to use +isn't a descendant of the current one. Or we may want to use CAP_MAC_ADMIN, since we really are trying to lock down root. CAP_SYS_ADMIN is needed to modify the whitelist or move another diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt index 523a9c16c400..72db89ed0609 100644 --- a/Documentation/cgroups/memcg_test.txt +++ b/Documentation/cgroups/memcg_test.txt @@ -1,5 +1,5 @@ Memory Resource Controller(Memcg) Implementation Memo. -Last Updated: 2009/1/19 +Last Updated: 2009/1/20 Base Kernel Version: based on 2.6.29-rc2. Because VM is getting complex (one of reasons is memcg...), memcg's behavior @@ -356,7 +356,25 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. (Shell-B) # move all tasks in /cgroup/test to /cgroup # /sbin/swapoff -a - # rmdir /test/cgroup + # rmdir /cgroup/test # kill malloc task. Of course, tmpfs v.s. swapoff test should be tested, too. + + 9.8 OOM-Killer + Out-of-memory caused by memcg's limit will kill tasks under + the memcg. When hierarchy is used, a task under hierarchy + will be killed by the kernel. + In this case, panic_on_oom shouldn't be invoked and tasks + in other groups shouldn't be killed. + + It's not difficult to cause OOM under memcg as following. + Case A) when you can swapoff + #swapoff -a + #echo 50M > /memory.limit_in_bytes + run 51M of malloc + + Case B) when you use mem+swap limitation. + #echo 50M > memory.limit_in_bytes + #echo 50M > memory.memsw.limit_in_bytes + run 51M of malloc diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index e1501964df1e..a98a7fe7aabb 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -302,7 +302,7 @@ will be charged as a new owner of it. unevictable - # of pages cannot be reclaimed.(mlocked etc) Below is depend on CONFIG_DEBUG_VM. - inactive_ratio - VM inernal parameter. (see mm/page_alloc.c) + inactive_ratio - VM internal parameter. (see mm/page_alloc.c) recent_rotated_anon - VM internal parameter. (see mm/vmscan.c) recent_rotated_file - VM internal parameter. (see mm/vmscan.c) recent_scanned_anon - VM internal parameter. (see mm/vmscan.c) diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 62254d4510c6..327de1624759 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -1,7 +1,7 @@ LINUX ALLOCATED DEVICES (2.6+ version) - Maintained by Torben Mathiasen <device@lanana.org> + Maintained by Alan Cox <device@lanana.org> Last revised: 29 November 2006 @@ -67,6 +67,11 @@ up to date. Due to the number of registrations I have to maintain it in "batch mode", so there is likely additional registrations that haven't been listed yet. +Fourth, remember that Linux now has extensive support for dynamic allocation +of device numbering and can use sysfs and udev to handle the naming needs. +There are still some exceptions in the serial and boot device area. Before +asking for a device number make sure you actually need one. + Finally, sometimes I have to play "namespace police." Please don't be offended. I often get submissions for /dev names that would be bound to cause conflicts down the road. I am trying to avoid getting in a @@ -101,7 +106,7 @@ Your cooperation is appreciated. 0 = /dev/ram0 First RAM disk 1 = /dev/ram1 Second RAM disk ... - 250 = /dev/initrd Initial RAM disk {2.6} + 250 = /dev/initrd Initial RAM disk Older kernels had /dev/ramdisk (1, 1) here. /dev/initrd refers to a RAM disk which was preloaded @@ -340,7 +345,7 @@ Your cooperation is appreciated. 14 = /dev/touchscreen/ucb1x00 UCB 1x00 touchscreen 15 = /dev/touchscreen/mk712 MK712 touchscreen 128 = /dev/beep Fancy beep device - 129 = /dev/modreq Kernel module load request {2.6} + 129 = 130 = /dev/watchdog Watchdog timer port 131 = /dev/temperature Machine internal temperature 132 = /dev/hwtrap Hardware fault trap @@ -350,10 +355,10 @@ Your cooperation is appreciated. 139 = /dev/openprom SPARC OpenBoot PROM 140 = /dev/relay8 Berkshire Products Octal relay card 141 = /dev/relay16 Berkshire Products ISO-16 relay card - 142 = /dev/msr x86 model-specific registers {2.6} + 142 = 143 = /dev/pciconf PCI configuration space 144 = /dev/nvram Non-volatile configuration RAM - 145 = /dev/hfmodem Soundcard shortwave modem control {2.6} + 145 = /dev/hfmodem Soundcard shortwave modem control 146 = /dev/graphics Linux/SGI graphics device 147 = /dev/opengl Linux/SGI OpenGL pipe 148 = /dev/gfx Linux/SGI graphics effects device @@ -435,6 +440,9 @@ Your cooperation is appreciated. 228 = /dev/hpet HPET driver 229 = /dev/fuse Fuse (virtual filesystem in user-space) 230 = /dev/midishare MidiShare driver + 231 = /dev/snapshot System memory snapshot device + 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions) + 233 = /dev/kmview View-OS A process with a view 240-254 Reserved for local use 255 Reserved for MISC_DYNAMIC_MINOR @@ -466,10 +474,7 @@ Your cooperation is appreciated. The device names specified are proposed -- if there are "standard" names for these devices, please let me know. - 12 block MSCDEX CD-ROM callback support {2.6} - 0 = /dev/dos_cd0 First MSCDEX CD-ROM - 1 = /dev/dos_cd1 Second MSCDEX CD-ROM - ... + 12 block 13 char Input core 0 = /dev/input/js0 First joystick @@ -498,7 +503,7 @@ Your cooperation is appreciated. 2 = /dev/midi00 First MIDI port 3 = /dev/dsp Digital audio 4 = /dev/audio Sun-compatible digital audio - 6 = /dev/sndstat Sound card status information {2.6} + 6 = 7 = /dev/audioctl SPARC audio control device 8 = /dev/sequencer2 Sequencer -- alternate device 16 = /dev/mixer1 Second soundcard mixer control @@ -510,14 +515,7 @@ Your cooperation is appreciated. 34 = /dev/midi02 Third MIDI port 50 = /dev/midi03 Fourth MIDI port - 14 block BIOS harddrive callback support {2.6} - 0 = /dev/dos_hda First BIOS harddrive whole disk - 64 = /dev/dos_hdb Second BIOS harddrive whole disk - 128 = /dev/dos_hdc Third BIOS harddrive whole disk - 192 = /dev/dos_hdd Fourth BIOS harddrive whole disk - - Partitions are handled in the same way as IDE disks - (see major number 3). + 14 block 15 char Joystick 0 = /dev/js0 First analog joystick @@ -535,14 +533,14 @@ Your cooperation is appreciated. 16 block GoldStar CD-ROM 0 = /dev/gscd GoldStar CD-ROM - 17 char Chase serial card + 17 char OBSOLETE (was Chase serial card) 0 = /dev/ttyH0 First Chase port 1 = /dev/ttyH1 Second Chase port ... 17 block Optics Storage CD-ROM 0 = /dev/optcd Optics Storage CD-ROM - 18 char Chase serial card - alternate devices + 18 char OBSOLETE (was Chase serial card - alternate devices) 0 = /dev/cuh0 Callout device for ttyH0 1 = /dev/cuh1 Callout device for ttyH1 ... @@ -644,8 +642,7 @@ Your cooperation is appreciated. 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3 - 26 char Quanta WinVision frame grabber {2.6} - 0 = /dev/wvisfgrab Quanta WinVision frame grabber + 26 char 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0 @@ -872,7 +869,7 @@ Your cooperation is appreciated. and "user level packet I/O." This board is also accessible as a standard networking "eth" device. - 38 block Reserved for Linux/AP+ + 38 block OBSOLETE (was Linux/AP+) 39 char ML-16P experimental I/O board 0 = /dev/ml16pa-a0 First card, first analog channel @@ -892,29 +889,16 @@ Your cooperation is appreciated. 50 = /dev/ml16pb-c1 Second card, second counter/timer 51 = /dev/ml16pb-c2 Second card, third counter/timer ... - 39 block Reserved for Linux/AP+ + 39 block - 40 char Matrox Meteor frame grabber {2.6} - 0 = /dev/mmetfgrab Matrox Meteor frame grabber + 40 char - 40 block Syquest EZ135 parallel port removable drive - 0 = /dev/eza Parallel EZ135 drive, whole disk - - This device is obsolete and will be removed in a - future version of Linux. It has been replaced with - the parallel port IDE disk driver at major number 45. - Partitions are handled in the same way as IDE disks - (see major number 3). + 40 block 41 char Yet Another Micro Monitor 0 = /dev/yamm Yet Another Micro Monitor - 41 block MicroSolutions BackPack parallel port CD-ROM - 0 = /dev/bpcd BackPack CD-ROM - - This device is obsolete and will be removed in a - future version of Linux. It has been replaced with - the parallel port ATAPI CD-ROM driver at major number 46. + 41 block 42 char Demo/sample use @@ -1681,13 +1665,7 @@ Your cooperation is appreciated. disks (see major number 3) except that the limit on partitions is 15. - 93 char IBM Smart Capture Card frame grabber {2.6} - 0 = /dev/iscc0 First Smart Capture Card - 1 = /dev/iscc1 Second Smart Capture Card - ... - 128 = /dev/isccctl0 First Smart Capture Card control - 129 = /dev/isccctl1 Second Smart Capture Card control - ... + 93 char 93 block NAND Flash Translation Layer filesystem 0 = /dev/nftla First NFTL layer @@ -1695,10 +1673,7 @@ Your cooperation is appreciated. ... 240 = /dev/nftlp 16th NTFL layer - 94 char miroVIDEO DC10/30 capture/playback device {2.6} - 0 = /dev/dcxx0 First capture card - 1 = /dev/dcxx1 Second capture card - ... + 94 char 94 block IBM S/390 DASD block storage 0 = /dev/dasda First DASD device, major @@ -1791,11 +1766,7 @@ Your cooperation is appreciated. ... 15 = /dev/amiraid/ar?p15 15th partition -102 char Philips SAA5249 Teletext signal decoder {2.6} - 0 = /dev/tlk0 First Teletext decoder - 1 = /dev/tlk1 Second Teletext decoder - 2 = /dev/tlk2 Third Teletext decoder - 3 = /dev/tlk3 Fourth Teletext decoder +102 char 102 block Compressed block device 0 = /dev/cbd/a First compressed block device, whole device @@ -1916,10 +1887,7 @@ Your cooperation is appreciated. DAC960 (see major number 48) except that the limit on partitions is 15. -111 char Philips SAA7146-based audio/video card {2.6} - 0 = /dev/av0 First A/V card - 1 = /dev/av1 Second A/V card - ... +111 char 111 block Compaq Next Generation Drive Array, eighth controller 0 = /dev/cciss/c7d0 First logical drive, whole disk @@ -2079,8 +2047,8 @@ Your cooperation is appreciated. ... 119 char VMware virtual network control - 0 = /dev/vmnet0 1st virtual network - 1 = /dev/vmnet1 2nd virtual network + 0 = /dev/vnet0 1st virtual network + 1 = /dev/vnet1 2nd virtual network ... 120-127 char LOCAL/EXPERIMENTAL USE @@ -2450,7 +2418,7 @@ Your cooperation is appreciated. 2 = /dev/raw/raw2 Second raw I/O device ... -163 char UNASSIGNED (was Radio Tech BIM-XXX-RS232 radio modem - see 51) +163 char 164 char Chase Research AT/PCI-Fast serial card 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0 @@ -2542,6 +2510,12 @@ Your cooperation is appreciated. 1 = /dev/clanvi1 Second cLAN adapter ... +179 block MMC block devices + 0 = /dev/mmcblk0 First SD/MMC card + 1 = /dev/mmcblk0p1 First partition on first MMC card + 8 = /dev/mmcblk1 Second SD/MMC card + ... + 179 char CCube DVXChip-based PCI products 0 = /dev/dvxirq0 First DVX device 1 = /dev/dvxirq1 Second DVX device @@ -2560,6 +2534,9 @@ Your cooperation is appreciated. 96 = /dev/usb/hiddev0 1st USB HID device ... 111 = /dev/usb/hiddev15 16th USB HID device + 112 = /dev/usb/auer0 1st auerswald ISDN device + ... + 127 = /dev/usb/auer15 16th auerswald ISDN device 128 = /dev/usb/brlvgr0 First Braille Voyager device ... 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device @@ -2810,6 +2787,16 @@ Your cooperation is appreciated. ... 190 = /dev/ttyUL3 Xilinx uartlite - port 3 191 = /dev/xvc0 Xen virtual console - port 0 + 192 = /dev/ttyPZ0 pmac_zilog - port 0 + ... + 195 = /dev/ttyPZ3 pmac_zilog - port 3 + 196 = /dev/ttyTX0 TX39/49 serial port 0 + ... + 204 = /dev/ttyTX7 TX39/49 serial port 7 + 205 = /dev/ttySC0 SC26xx serial port 0 + 206 = /dev/ttySC1 SC26xx serial port 1 + 207 = /dev/ttySC2 SC26xx serial port 2 + 208 = /dev/ttySC3 SC26xx serial port 3 205 char Low-density serial ports (alternate device) 0 = /dev/culu0 Callout device for ttyLU0 @@ -3145,6 +3132,14 @@ Your cooperation is appreciated. 1 = /dev/blockrom1 Second ROM card's translation layer interface ... +259 block Block Extended Major + Used dynamically to hold additional partition minor + numbers and allow large numbers of partitions per device + +259 char FPGA configuration interfaces + 0 = /dev/icap0 First Xilinx internal configuration + 1 = /dev/icap1 Second Xilinx internal configuration + 260 char OSD (Object-based-device) SCSI Device 0 = /dev/osd0 First OSD Device 1 = /dev/osd1 Second OSD Device diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index d0f354670646..39246fc11257 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -255,6 +255,16 @@ Who: Jan Engelhardt <jengelh@computergmbh.de> --------------------------- +What: GPIO autorequest on gpio_direction_{input,output}() in gpiolib +When: February 2010 +Why: All callers should use explicit gpio_request()/gpio_free(). + The autorequest mechanism in gpiolib was provided mostly as a + migration aid for legacy GPIO interfaces (for SOC based GPIOs). + Those users have now largely migrated. Platforms implementing + the GPIO interfaces without using gpiolib will see no changes. +Who: David Brownell <dbrownell@users.sourceforge.net> +--------------------------- + What: b43 support for firmware revision < 410 When: The schedule was July 2008, but it was decided that we are going to keep the code as long as there are no major maintanance headaches. @@ -273,13 +283,6 @@ Who: Glauber Costa <gcosta@redhat.com> --------------------------- -What: remove HID compat support -When: 2.6.29 -Why: needed only as a temporary solution until distros fix themselves up -Who: Jiri Slaby <jirislaby@gmail.com> - ---------------------------- - What: print_fn_descriptor_symbol() When: October 2009 Why: The %pF vsprintf format provides the same functionality in a diff --git a/Documentation/filesystems/caching/backend-api.txt b/Documentation/filesystems/caching/backend-api.txt new file mode 100644 index 000000000000..382d52cdaf2d --- /dev/null +++ b/Documentation/filesystems/caching/backend-api.txt @@ -0,0 +1,658 @@ + ========================== + FS-CACHE CACHE BACKEND API + ========================== + +The FS-Cache system provides an API by which actual caches can be supplied to +FS-Cache for it to then serve out to network filesystems and other interested +parties. + +This API is declared in <linux/fscache-cache.h>. + + +==================================== +INITIALISING AND REGISTERING A CACHE +==================================== + +To start off, a cache definition must be initialised and registered for each +cache the backend wants to make available. For instance, CacheFS does this in +the fill_super() operation on mounting. + +The cache definition (struct fscache_cache) should be initialised by calling: + + void fscache_init_cache(struct fscache_cache *cache, + struct fscache_cache_ops *ops, + const char *idfmt, + ...); + +Where: + + (*) "cache" is a pointer to the cache definition; + + (*) "ops" is a pointer to the table of operations that the backend supports on + this cache; and + + (*) "idfmt" is a format and printf-style arguments for constructing a label + for the cache. + + +The cache should then be registered with FS-Cache by passing a pointer to the +previously initialised cache definition to: + + int fscache_add_cache(struct fscache_cache *cache, + struct fscache_object *fsdef, + const char *tagname); + +Two extra arguments should also be supplied: + + (*) "fsdef" which should point to the object representation for the FS-Cache + master index in this cache. Netfs primary index entries will be created + here. FS-Cache keeps the caller's reference to the index object if + successful and will release it upon withdrawal of the cache. + + (*) "tagname" which, if given, should be a text string naming this cache. If + this is NULL, the identifier will be used instead. For CacheFS, the + identifier is set to name the underlying block device and the tag can be + supplied by mount. + +This function may return -ENOMEM if it ran out of memory or -EEXIST if the tag +is already in use. 0 will be returned on success. + + +===================== +UNREGISTERING A CACHE +===================== + +A cache can be withdrawn from the system by calling this function with a +pointer to the cache definition: + + void fscache_withdraw_cache(struct fscache_cache *cache); + +In CacheFS's case, this is called by put_super(). + + +======== +SECURITY +======== + +The cache methods are executed one of two contexts: + + (1) that of the userspace process that issued the netfs operation that caused + the cache method to be invoked, or + + (2) that of one of the processes in the FS-Cache thread pool. + +In either case, this may not be an appropriate context in which to access the +cache. + +The calling process's fsuid, fsgid and SELinux security identities may need to +be masqueraded for the duration of the cache driver's access to the cache. +This is left to the cache to handle; FS-Cache makes no effort in this regard. + + +=================================== +CONTROL AND STATISTICS PRESENTATION +=================================== + +The cache may present data to the outside world through FS-Cache's interfaces +in sysfs and procfs - the former for control and the latter for statistics. + +A sysfs directory called /sys/fs/fscache/<cachetag>/ is created if CONFIG_SYSFS +is enabled. This is accessible through the kobject struct fscache_cache::kobj +and is for use by the cache as it sees fit. + + +======================== +RELEVANT DATA STRUCTURES +======================== + + (*) Index/Data file FS-Cache representation cookie: + + struct fscache_cookie { + struct fscache_object_def *def; + struct fscache_netfs *netfs; + void *netfs_data; + ... + }; + + The fields that might be of use to the backend describe the object + definition, the netfs definition and the netfs's data for this cookie. + The object definition contain functions supplied by the netfs for loading + and matching index entries; these are required to provide some of the + cache operations. + + + (*) In-cache object representation: + + struct fscache_object { + int debug_id; + enum { + FSCACHE_OBJECT_RECYCLING, + ... + } state; + spinlock_t lock + struct fscache_cache *cache; + struct fscache_cookie *cookie; + ... + }; + + Structures of this type should be allocated by the cache backend and + passed to FS-Cache when requested by the appropriate cache operation. In + the case of CacheFS, they're embedded in CacheFS's internal object + structures. + + The debug_id is a simple integer that can be used in debugging messages + that refer to a particular object. In such a case it should be printed + using "OBJ%x" to be consistent with FS-Cache. + + Each object contains a pointer to the cookie that represents the object it + is backing. An object should retired when put_object() is called if it is + in state FSCACHE_OBJECT_RECYCLING. The fscache_object struct should be + initialised by calling fscache_object_init(object). + + + (*) FS-Cache operation record: + + struct fscache_operation { + atomic_t usage; + struct fscache_object *object; + unsigned long flags; + #define FSCACHE_OP_EXCLUSIVE + void (*processor)(struct fscache_operation *op); + void (*release)(struct fscache_operation *op); + ... + }; + + FS-Cache has a pool of threads that it uses to give CPU time to the + various asynchronous operations that need to be done as part of driving + the cache. These are represented by the above structure. The processor + method is called to give the op CPU time, and the release method to get + rid of it when its usage count reaches 0. + + An operation can be made exclusive upon an object by setting the + appropriate flag before enqueuing it with fscache_enqueue_operation(). If + an operation needs more processing time, it should be enqueued again. + + + (*) FS-Cache retrieval operation record: + + struct fscache_retrieval { + struct fscache_operation op; + struct address_space *mapping; + struct list_head *to_do; + ... + }; + + A structure of this type is allocated by FS-Cache to record retrieval and + allocation requests made by the netfs. This struct is then passed to the + backend to do the operation. The backend may get extra refs to it by + calling fscache_get_retrieval() and refs may be discarded by calling + fscache_put_retrieval(). + + A retrieval operation can be used by the backend to do retrieval work. To + do this, the retrieval->op.processor method pointer should be set + appropriately by the backend and fscache_enqueue_retrieval() called to + submit it to the thread pool. CacheFiles, for example, uses this to queue + page examination when it detects PG_lock being cleared. + + The to_do field is an empty list available for the cache backend to use as + it sees fit. + + + (*) FS-Cache storage operation record: + + struct fscache_storage { + struct fscache_operation op; + pgoff_t store_limit; + ... + }; + + A structure of this type is allocated by FS-Cache to record outstanding + writes to be made. FS-Cache itself enqueues this operation and invokes + the write_page() method on the object at appropriate times to effect + storage. + + +================ +CACHE OPERATIONS +================ + +The cache backend provides FS-Cache with a table of operations that can be +performed on the denizens of the cache. These are held in a structure of type: + + struct fscache_cache_ops + + (*) Name of cache provider [mandatory]: + + const char *name + + This isn't strictly an operation, but should be pointed at a string naming + the backend. + + + (*) Allocate a new object [mandatory]: + + struct fscache_object *(*alloc_object)(struct fscache_cache *cache, + struct fscache_cookie *cookie) + + This method is used to allocate a cache object representation to back a + cookie in a particular cache. fscache_object_init() should be called on + the object to initialise it prior to returning. + + This function may also be used to parse the index key to be used for + multiple lookup calls to turn it into a more convenient form. FS-Cache + will call the lookup_complete() method to allow the cache to release the + form once lookup is complete or aborted. + + + (*) Look up and create object [mandatory]: + + void (*lookup_object)(struct fscache_object *object) + + This method is used to look up an object, given that the object is already + allocated and attached to the cookie. This should instantiate that object + in the cache if it can. + + The method should call fscache_object_lookup_negative() as soon as + possible if it determines the object doesn't exist in the cache. If the + object is found to exist and the netfs indicates that it is valid then + fscache_obtained_object() should be called once the object is in a + position to have data stored in it. Similarly, fscache_obtained_object() + should also be called once a non-present object has been created. + + If a lookup error occurs, fscache_object_lookup_error() should be called + to abort the lookup of that object. + + + (*) Release lookup data [mandatory]: + + void (*lookup_complete)(struct fscache_object *object) + + This method is called to ask the cache to release any resources it was + using to perform a lookup. + + + (*) Increment object refcount [mandatory]: + + struct fscache_object *(*grab_object)(struct fscache_object *object) + + This method is called to increment the reference count on an object. It + may fail (for instance if the cache is being withdrawn) by returning NULL. + It should return the object pointer if successful. + + + (*) Lock/Unlock object [mandatory]: + + void (*lock_object)(struct fscache_object *object) + void (*unlock_object)(struct fscache_object *object) + + These methods are used to exclusively lock an object. It must be possible + to schedule with the lock held, so a spinlock isn't sufficient. + + + (*) Pin/Unpin object [optional]: + + int (*pin_object)(struct fscache_object *object) + void (*unpin_object)(struct fscache_object *object) + + These methods are used to pin an object into the cache. Once pinned an + object cannot be reclaimed to make space. Return -ENOSPC if there's not + enough space in the cache to permit this. + + + (*) Update object [mandatory]: + + int (*update_object)(struct fscache_object *object) + + This is called to update the index entry for the specified object. The + new information should be in object->cookie->netfs_data. This can be + obtained by calling object->cookie->def->get_aux()/get_attr(). + + + (*) Discard object [mandatory]: + + void (*drop_object)(struct fscache_object *object) + + This method is called to indicate that an object has been unbound from its + cookie, and that the cache should release the object's resources and + retire it if it's in state FSCACHE_OBJECT_RECYCLING. + + This method should not attempt to release any references held by the + caller. The caller will invoke the put_object() method as appropriate. + + + (*) Release object reference [mandatory]: + + void (*put_object)(struct fscache_object *object) + + This method is used to discard a reference to an object. The object may + be freed when all the references to it are released. + + + (*) Synchronise a cache [mandatory]: + + void (*sync)(struct fscache_cache *cache) + + This is called to ask the backend to synchronise a cache with its backing + device. + + + (*) Dissociate a cache [mandatory]: + + void (*dissociate_pages)(struct fscache_cache *cache) + + This is called to ask a cache to perform any page dissociations as part of + cache withdrawal. + + + (*) Notification that the attributes on a netfs file changed [mandatory]: + + int (*attr_changed)(struct fscache_object *object); + + This is called to indicate to the cache that certain attributes on a netfs + file have changed (for example the maximum size a file may reach). The + cache can read these from the netfs by calling the cookie's get_attr() + method. + + The cache may use the file size information to reserve space on the cache. + It should also call fscache_set_store_limit() to indicate to FS-Cache the + highest byte it's willing to store for an object. + + This method may return -ve if an error occurred or the cache object cannot + be expanded. In such a case, the object will be withdrawn from service. + + This operation is run asynchronously from FS-Cache's thread pool, and + storage and retrieval operations from the netfs are excluded during the + execution of this operation. + + + (*) Reserve cache space for an object's data [optional]: + + int (*reserve_space)(struct fscache_object *object, loff_t size); + + This is called to request that cache space be reserved to hold the data + for an object and the metadata used to track it. Zero size should be + taken as request to cancel a reservation. + + This should return 0 if successful, -ENOSPC if there isn't enough space + available, or -ENOMEM or -EIO on other errors. + + The reservation may exceed the current size of the object, thus permitting + future expansion. If the amount of space consumed by an object would + exceed the reservation, it's permitted to refuse requests to allocate + pages, but not required. An object may be pruned down to its reservation + size if larger than that already. + + + (*) Request page be read from cache [mandatory]: + + int (*read_or_alloc_page)(struct fscache_retrieval *op, + struct page *page, + gfp_t gfp) + + This is called to attempt to read a netfs page from the cache, or to + reserve a backing block if not. FS-Cache will have done as much checking + as it can before calling, but most of the work belongs to the backend. + + If there's no page in the cache, then -ENODATA should be returned if the + backend managed to reserve a backing block; -ENOBUFS or -ENOMEM if it + didn't. + + If there is suitable data in the cache, then a read operation should be + queued and 0 returned. When the read finishes, fscache_end_io() should be + called. + + The fscache_mark_pages_cached() should be called for the page if any cache + metadata is retained. This will indicate to the netfs that the page needs + explicit uncaching. This operation takes a pagevec, thus allowing several + pages to be marked at once. + + The retrieval record pointed to by op should be retained for each page + queued and released when I/O on the page has been formally ended. + fscache_get/put_retrieval() are available for this purpose. + + The retrieval record may be used to get CPU time via the FS-Cache thread + pool. If this is desired, the op->op.processor should be set to point to + the appropriate processing routine, and fscache_enqueue_retrieval() should + be called at an appropriate point to request CPU time. For instance, the + retrieval routine could be enqueued upon the completion of a disk read. + The to_do field in the retrieval record is provided to aid in this. + + If an I/O error occurs, fscache_io_error() should be called and -ENOBUFS + returned if possible or fscache_end_io() called with a suitable error + code.. + + + (*) Request pages be read from cache [mandatory]: + + int (*read_or_alloc_pages)(struct fscache_retrieval *op, + struct list_head *pages, + unsigned *nr_pages, + gfp_t gfp) + + This is like the read_or_alloc_page() method, except it is handed a list + of pages instead of one page. Any pages on which a read operation is + started must be added to the page cache for the specified mapping and also + to the LRU. Such pages must also be removed from the pages list and + *nr_pages decremented per page. + + If there was an error such as -ENOMEM, then that should be returned; else + if one or more pages couldn't be read or allocated, then -ENOBUFS should + be returned; else if one or more pages couldn't be read, then -ENODATA + should be returned. If all the pages are dispatched then 0 should be + returned. + + + (*) Request page be allocated in the cache [mandatory]: + + int (*allocate_page)(struct fscache_retrieval *op, + struct page *page, + gfp_t gfp) + + This is like the read_or_alloc_page() method, except that it shouldn't + read from the cache, even if there's data there that could be retrieved. + It should, however, set up any internal metadata required such that + the write_page() method can write to the cache. + + If there's no backing block available, then -ENOBUFS should be returned + (or -ENOMEM if there were other problems). If a block is successfully + allocated, then the netfs page should be marked and 0 returned. + + + (*) Request pages be allocated in the cache [mandatory]: + + int (*allocate_pages)(struct fscache_retrieval *op, + struct list_head *pages, + unsigned *nr_pages, + gfp_t gfp) + + This is an multiple page version of the allocate_page() method. pages and + nr_pages should be treated as for the read_or_alloc_pages() method. + + + (*) Request page be written to cache [mandatory]: + + int (*write_page)(struct fscache_storage *op, + struct page *page); + + This is called to write from a page on which there was a previously + successful read_or_alloc_page() call or similar. FS-Cache filters out + pages that don't have mappings. + + This method is called asynchronously from the FS-Cache thread pool. It is + not required to actually store anything, provided -ENODATA is then + returned to the next read of this page. + + If an error occurred, then a negative error code should be returned, + otherwise zero should be returned. FS-Cache will take appropriate action + in response to an error, such as withdrawing this object. + + If this method returns success then FS-Cache will inform the netfs + appropriately. + + + (*) Discard retained per-page metadata [mandatory]: + + void (*uncache_page)(struct fscache_object *object, struct page *page) + + This is called when a netfs page is being evicted from the pagecache. The + cache backend should tear down any internal representation or tracking it + maintains for this page. + + +================== +FS-CACHE UTILITIES +================== + +FS-Cache provides some utilities that a cache backend may make use of: + + (*) Note occurrence of an I/O error in a cache: + + void fscache_io_error(struct fscache_cache *cache) + + This tells FS-Cache that an I/O error occurred in the cache. After this + has been called, only resource dissociation operations (object and page + release) will be passed from the netfs to the cache backend for the + specified cache. + + This does not actually withdraw the cache. That must be done separately. + + + (*) Invoke the retrieval I/O completion function: + + void fscache_end_io(struct fscache_retrieval *op, struct page *page, + int error); + + This is called to note the end of an attempt to retrieve a page. The + error value should be 0 if successful and an error otherwise. + + + (*) Set highest store limit: + + void fscache_set_store_limit(struct fscache_object *object, + loff_t i_size); + + This sets the limit FS-Cache imposes on the highest byte it's willing to + try and store for a netfs. Any page over this limit is automatically + rejected by fscache_read_alloc_page() and co with -ENOBUFS. + + + (*) Mark pages as being cached: + + void fscache_mark_pages_cached(struct fscache_retrieval *op, + struct pagevec *pagevec); + + This marks a set of pages as being cached. After this has been called, + the netfs must call fscache_uncache_page() to unmark the pages. + + + (*) Perform coherency check on an object: + + enum fscache_checkaux fscache_check_aux(struct fscache_object *object, + const void *data, + uint16_t datalen); + + This asks the netfs to perform a coherency check on an object that has + just been looked up. The cookie attached to the object will determine the + netfs to use. data and datalen should specify where the auxiliary data + retrieved from the cache can be found. + + One of three values will be returned: + + (*) FSCACHE_CHECKAUX_OKAY + + The coherency data indicates the object is valid as is. + + (*) FSCACHE_CHECKAUX_NEEDS_UPDATE + + The coherency data needs updating, but otherwise the object is + valid. + + (*) FSCACHE_CHECKAUX_OBSOLETE + + The coherency data indicates that the object is obsolete and should + be discarded. + + + (*) Initialise a freshly allocated object: + + void fscache_object_init(struct fscache_object *object); + + This initialises all the fields in an object representation. + + + (*) Indicate the destruction of an object: + + void fscache_object_destroyed(struct fscache_cache *cache); + + This must be called to inform FS-Cache that an object that belonged to a + cache has been destroyed and deallocated. This will allow continuation + of the cache withdrawal process when it is stopped pending destruction of + all the objects. + + + (*) Indicate negative lookup on an object: + + void fscache_object_lookup_negative(struct fscache_object *object); + + This is called to indicate to FS-Cache that a lookup process for an object + found a negative result. + + This changes the state of an object to permit reads pending on lookup + completion to go off and start fetching data from the netfs server as it's + known at this point that there can't be any data in the cache. + + This may be called multiple times on an object. Only the first call is + significant - all subsequent calls are ignored. + + + (*) Indicate an object has been obtained: + + void fscache_obtained_object(struct fscache_object *object); + + This is called to indicate to FS-Cache that a lookup process for an object + produced a positive result, or that an object was created. This should + only be called once for any particular object. + + This changes the state of an object to indicate: + + (1) if no call to fscache_object_lookup_negative() has been made on + this object, that there may be data available, and that reads can + now go and look for it; and + + (2) that writes may now proceed against this object. + + + (*) Indicate that object lookup failed: + + void fscache_object_lookup_error(struct fscache_object *object); + + This marks an object as having encountered a fatal error (usually EIO) + and causes it to move into a state whereby it will be withdrawn as soon + as possible. + + + (*) Get and release references on a retrieval record: + + void fscache_get_retrieval(struct fscache_retrieval *op); + void fscache_put_retrieval(struct fscache_retrieval *op); + + These two functions are used to retain a retrieval record whilst doing + asynchronous data retrieval and block allocation. + + + (*) Enqueue a retrieval record for processing. + + void fscache_enqueue_retrieval(struct fscache_retrieval *op); + + This enqueues a retrieval record for processing by the FS-Cache thread + pool. One of the threads in the pool will invoke the retrieval record's + op->op.processor callback function. This function may be called from + within the callback function. + + + (*) List of object state names: + + const char *fscache_object_states[]; + + For debugging purposes, this may be used to turn the state that an object + is in into a text string for display purposes. diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt new file mode 100644 index 000000000000..c78a49b7bba6 --- /dev/null +++ b/Documentation/filesystems/caching/cachefiles.txt @@ -0,0 +1,501 @@ + =============================================== + CacheFiles: CACHE ON ALREADY MOUNTED FILESYSTEM + =============================================== + +Contents: + + (*) Overview. + + (*) Requirements. + + (*) Configuration. + + (*) Starting the cache. + + (*) Things to avoid. + + (*) Cache culling. + + (*) Cache structure. + + (*) Security model and SELinux. + + (*) A note on security. + + (*) Statistical information. + + (*) Debugging. + + +======== +OVERVIEW +======== + +CacheFiles is a caching backend that's meant to use as a cache a directory on +an already mounted filesystem of a local type (such as Ext3). + +CacheFiles uses a userspace daemon to do some of the cache management - such as +reaping stale nodes and culling. This is called cachefilesd and lives in +/sbin. + +The filesystem and data integrity of the cache are only as good as those of the +filesystem providing the backing services. Note that CacheFiles does not +attempt to journal anything since the journalling interfaces of the various +filesystems are very specific in nature. + +CacheFiles creates a misc character device - "/dev/cachefiles" - that is used +to communication with the daemon. Only one thing may have this open at once, +and whilst it is open, a cache is at least partially in existence. The daemon +opens this and sends commands down it to control the cache. + +CacheFiles is currently limited to a single cache. + +CacheFiles attempts to maintain at least a certain percentage of free space on +the filesystem, shrinking the cache by culling the objects it contains to make +space if necessary - see the "Cache Culling" section. This means it can be +placed on the same medium as a live set of data, and will expand to make use of +spare space and automatically contract when the set of data requires more +space. + + +============ +REQUIREMENTS +============ + +The use of CacheFiles and its daemon requires the following features to be +available in the system and in the cache filesystem: + + - dnotify. + + - extended attributes (xattrs). + + - openat() and friends. + + - bmap() support on files in the filesystem (FIBMAP ioctl). + + - The use of bmap() to detect a partial page at the end of the file. + +It is strongly recommended that the "dir_index" option is enabled on Ext3 +filesystems being used as a cache. + + +============= +CONFIGURATION +============= + +The cache is configured by a script in /etc/cachefilesd.conf. These commands +set up cache ready for use. The following script commands are available: + + (*) brun <N>% + (*) bcull <N>% + (*) bstop <N>% + (*) frun <N>% + (*) fcull <N>% + (*) fstop <N>% + + Configure the culling limits. Optional. See the section on culling + The defaults are 7% (run), 5% (cull) and 1% (stop) respectively. + + The commands beginning with a 'b' are file space (block) limits, those + beginning with an 'f' are file count limits. + + (*) dir <path> + + Specify the directory containing the root of the cache. Mandatory. + + (*) tag <name> + + Specify a tag to FS-Cache to use in distinguishing multiple caches. + Optional. The default is "CacheFiles". + + (*) debug <mask> + + Specify a numeric bitmask to control debugging in the kernel module. + Optional. The default is zero (all off). The following values can be + OR'd into the mask to collect various information: + + 1 Turn on trace of function entry (_enter() macros) + 2 Turn on trace of function exit (_leave() macros) + 4 Turn on trace of internal debug points (_debug()) + + This mask can also be set through sysfs, eg: + + echo 5 >/sys/modules/cachefiles/parameters/debug + + +================== +STARTING THE CACHE +================== + +The cache is started by running the daemon. The daemon opens the cache device, +configures the cache and tells it to begin caching. At that point the cache +binds to fscache and the cache becomes live. + +The daemon is run as follows: + + /sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>] + +The flags are: + + (*) -d + + Increase the debugging level. This can be specified multiple times and + is cumulative with itself. + + (*) -s + + Send messages to stderr instead of syslog. + + (*) -n + + Don't daemonise and go into background. + + (*) -f <configfile> + + Use an alternative configuration file rather than the default one. + + +=============== +THINGS TO AVOID +=============== + +Do not mount other things within the cache as this will cause problems. The +kernel module contains its own very cut-down path walking facility that ignores +mountpoints, but the daemon can't avoid them. + +Do not create, rename or unlink files and directories in the cache whilst the +cache is active, as this may cause the state to become uncertain. + +Renaming files in the cache might make objects appear to be other objects (the +filename is part of the lookup key). + +Do not change or remove the extended attributes attached to cache files by the +cache as this will cause the cache state management to get confused. + +Do not create files or directories in the cache, lest the cache get confused or +serve incorrect data. + +Do not chmod files in the cache. The module creates things with minimal +permissions to prevent random users being able to access them directly. + + +============= +CACHE CULLING +============= + +The cache may need culling occasionally to make space. This involves +discarding objects from the cache that have been used less recently than +anything else. Culling is based on the access time of data objects. Empty +directories are culled if not in use. + +Cache culling is done on the basis of the percentage of blocks and the +percentage of files available in the underlying filesystem. There are six +"limits": + + (*) brun + (*) frun + + If the amount of free space and the number of available files in the cache + rises above both these limits, then culling is turned off. + + (*) bcull + (*) fcull + + If the amount of available space or the number of available files in the + cache falls below either of these limits, then culling is started. + + (*) bstop + (*) fstop + + If the amount of available space or the number of available files in the + cache falls below either of these limits, then no further allocation of + disk space or files is permitted until culling has raised things above + these limits again. + +These must be configured thusly: + + 0 <= bstop < bcull < brun < 100 + 0 <= fstop < fcull < frun < 100 + +Note that these are percentages of available space and available files, and do +_not_ appear as 100 minus the percentage displayed by the "df" program. + +The userspace daemon scans the cache to build up a table of cullable objects. +These are then culled in least recently used order. A new scan of the cache is +started as soon as space is made in the table. Objects will be skipped if +their atimes have changed or if the kernel module says it is still using them. + + +=============== +CACHE STRUCTURE +=============== + +The CacheFiles module will create two directories in the directory it was +given: + + (*) cache/ + + (*) graveyard/ + +The active cache objects all reside in the first directory. The CacheFiles +kernel module moves any retired or culled objects that it can't simply unlink +to the graveyard from which the daemon will actually delete them. + +The daemon uses dnotify to monitor the graveyard directory, and will delete +anything that appears therein. + + +The module represents index objects as directories with the filename "I..." or +"J...". Note that the "cache/" directory is itself a special index. + +Data objects are represented as files if they have no children, or directories +if they do. Their filenames all begin "D..." or "E...". If represented as a +directory, data objects will have a file in the directory called "data" that +actually holds the data. + +Special objects are similar to data objects, except their filenames begin +"S..." or "T...". + + +If an object has children, then it will be represented as a directory. +Immediately in the representative directory are a collection of directories +named for hash values of the child object keys with an '@' prepended. Into +this directory, if possible, will be placed the representations of the child +objects: + + INDEX INDEX INDEX DATA FILES + ========= ========== ================================= ================ + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400 + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry + + +If the key is so long that it exceeds NAME_MAX with the decorations added on to +it, then it will be cut into pieces, the first few of which will be used to +make a nest of directories, and the last one of which will be the objects +inside the last directory. The names of the intermediate directories will have +'+' prepended: + + J1223/@23/+xy...z/+kl...m/Epqr + + +Note that keys are raw data, and not only may they exceed NAME_MAX in size, +they may also contain things like '/' and NUL characters, and so they may not +be suitable for turning directly into a filename. + +To handle this, CacheFiles will use a suitably printable filename directly and +"base-64" encode ones that aren't directly suitable. The two versions of +object filenames indicate the encoding: + + OBJECT TYPE PRINTABLE ENCODED + =============== =============== =============== + Index "I..." "J..." + Data "D..." "E..." + Special "S..." "T..." + +Intermediate directories are always "@" or "+" as appropriate. + + +Each object in the cache has an extended attribute label that holds the object +type ID (required to distinguish special objects) and the auxiliary data from +the netfs. The latter is used to detect stale objects in the cache and update +or retire them. + + +Note that CacheFiles will erase from the cache any file it doesn't recognise or +any file of an incorrect type (such as a FIFO file or a device file). + + +========================== +SECURITY MODEL AND SELINUX +========================== + +CacheFiles is implemented to deal properly with the LSM security features of +the Linux kernel and the SELinux facility. + +One of the problems that CacheFiles faces is that it is generally acting on +behalf of a process, and running in that process's context, and that includes a +security context that is not appropriate for accessing the cache - either +because the files in the cache are inaccessible to that process, or because if +the process creates a file in the cache, that file may be inaccessible to other +processes. + +The way CacheFiles works is to temporarily change the security context (fsuid, +fsgid and actor security label) that the process acts as - without changing the +security context of the process when it the target of an operation performed by +some other process (so signalling and suchlike still work correctly). + + +When the CacheFiles module is asked to bind to its cache, it: + + (1) Finds the security label attached to the root cache directory and uses + that as the security label with which it will create files. By default, + this is: + + cachefiles_var_t + + (2) Finds the security label of the process which issued the bind request + (presumed to be the cachefilesd daemon), which by default will be: + + cachefilesd_t + + and asks LSM to supply a security ID as which it should act given the + daemon's label. By default, this will be: + + cachefiles_kernel_t + + SELinux transitions the daemon's security ID to the module's security ID + based on a rule of this form in the policy. + + type_transition <daemon's-ID> kernel_t : process <module's-ID>; + + For instance: + + type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t; + + +The module's security ID gives it permission to create, move and remove files +and directories in the cache, to find and access directories and files in the +cache, to set and access extended attributes on cache objects, and to read and +write files in the cache. + +The daemon's security ID gives it only a very restricted set of permissions: it +may scan directories, stat files and erase files and directories. It may +not read or write files in the cache, and so it is precluded from accessing the +data cached therein; nor is it permitted to create new files in the cache. + + +There are policy source files available in: + + http://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2 + +and later versions. In that tarball, see the files: + + cachefilesd.te + cachefilesd.fc + cachefilesd.if + +They are built and installed directly by the RPM. + +If a non-RPM based system is being used, then copy the above files to their own +directory and run: + + make -f /usr/share/selinux/devel/Makefile + semodule -i cachefilesd.pp + +You will need checkpolicy and selinux-policy-devel installed prior to the +build. + + +By default, the cache is located in /var/fscache, but if it is desirable that +it should be elsewhere, than either the above policy files must be altered, or +an auxiliary policy must be installed to label the alternate location of the +cache. + +For instructions on how to add an auxiliary policy to enable the cache to be +located elsewhere when SELinux is in enforcing mode, please see: + + /usr/share/doc/cachefilesd-*/move-cache.txt + +When the cachefilesd rpm is installed; alternatively, the document can be found +in the sources. + + +================== +A NOTE ON SECURITY +================== + +CacheFiles makes use of the split security in the task_struct. It allocates +its own task_security structure, and redirects current->act_as to point to it +when it acts on behalf of another process, in that process's context. + +The reason it does this is that it calls vfs_mkdir() and suchlike rather than +bypassing security and calling inode ops directly. Therefore the VFS and LSM +may deny the CacheFiles access to the cache data because under some +circumstances the caching code is running in the security context of whatever +process issued the original syscall on the netfs. + +Furthermore, should CacheFiles create a file or directory, the security +parameters with that object is created (UID, GID, security label) would be +derived from that process that issued the system call, thus potentially +preventing other processes from accessing the cache - including CacheFiles's +cache management daemon (cachefilesd). + +What is required is to temporarily override the security of the process that +issued the system call. We can't, however, just do an in-place change of the +security data as that affects the process as an object, not just as a subject. +This means it may lose signals or ptrace events for example, and affects what +the process looks like in /proc. + +So CacheFiles makes use of a logical split in the security between the +objective security (task->sec) and the subjective security (task->act_as). The +objective security holds the intrinsic security properties of a process and is +never overridden. This is what appears in /proc, and is what is used when a +process is the target of an operation by some other process (SIGKILL for +example). + +The subjective security holds the active security properties of a process, and +may be overridden. This is not seen externally, and is used whan a process +acts upon another object, for example SIGKILLing another process or opening a +file. + +LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request +for CacheFiles to run in a context of a specific security label, or to create +files and directories with another security label. + + +======================= +STATISTICAL INFORMATION +======================= + +If FS-Cache is compiled with the following option enabled: + + CONFIG_CACHEFILES_HISTOGRAM=y + +then it will gather certain statistics and display them through a proc file. + + (*) /proc/fs/cachefiles/histogram + + cat /proc/fs/cachefiles/histogram + JIFS SECS LOOKUPS MKDIRS CREATES + ===== ===== ========= ========= ========= + + This shows the breakdown of the number of times each amount of time + between 0 jiffies and HZ-1 jiffies a variety of tasks took to run. The + columns are as follows: + + COLUMN TIME MEASUREMENT + ======= ======================================================= + LOOKUPS Length of time to perform a lookup on the backing fs + MKDIRS Length of time to perform a mkdir on the backing fs + CREATES Length of time to perform a create on the backing fs + + Each row shows the number of events that took a particular range of times. + Each step is 1 jiffy in size. The JIFS column indicates the particular + jiffy range covered, and the SECS field the equivalent number of seconds. + + +========= +DEBUGGING +========= + +If CONFIG_CACHEFILES_DEBUG is enabled, the CacheFiles facility can have runtime +debugging enabled by adjusting the value in: + + /sys/module/cachefiles/parameters/debug + +This is a bitmask of debugging streams to enable: + + BIT VALUE STREAM POINT + ======= ======= =============================== ======================= + 0 1 General Function entry trace + 1 2 Function exit trace + 2 4 General + +The appropriate set of values should be OR'd together and the result written to +the control file. For example: + + echo $((1|4|8)) >/sys/module/cachefiles/parameters/debug + +will turn on all function entry debugging. diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt new file mode 100644 index 000000000000..9e94b9491d89 --- /dev/null +++ b/Documentation/filesystems/caching/fscache.txt @@ -0,0 +1,333 @@ + ========================== + General Filesystem Caching + ========================== + +======== +OVERVIEW +======== + +This facility is a general purpose cache for network filesystems, though it +could be used for caching other things such as ISO9660 filesystems too. + +FS-Cache mediates between cache backends (such as CacheFS) and network +filesystems: + + +---------+ + | | +--------------+ + | NFS |--+ | | + | | | +-->| CacheFS | + +---------+ | +----------+ | | /dev/hda5 | + | | | | +--------------+ + +---------+ +-->| | | + | | | |--+ + | AFS |----->| FS-Cache | + | | | |--+ + +---------+ +-->| | | + | | | | +--------------+ + +---------+ | +----------+ | | | + | | | +-->| CacheFiles | + | ISOFS |--+ | /var/cache | + | | +--------------+ + +---------+ + +Or to look at it another way, FS-Cache is a module that provides a caching +facility to a network filesystem such that the cache is transparent to the +user: + + +---------+ + | | + | Server | + | | + +---------+ + | NETWORK + ~~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + | + | +----------+ + V | | + +---------+ | | + | | | | + | NFS |----->| FS-Cache | + | | | |--+ + +---------+ | | | +--------------+ +--------------+ + | | | | | | | | + V +----------+ +-->| CacheFiles |-->| Ext3 | + +---------+ | /var/cache | | /dev/sda6 | + | | +--------------+ +--------------+ + | VFS | ^ ^ + | | | | + +---------+ +--------------+ | + | KERNEL SPACE | | + ~~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|~~~~~~|~~~~ + | USER SPACE | | + V | | + +---------+ +--------------+ + | | | | + | Process | | cachefilesd | + | | | | + +---------+ +--------------+ + + +FS-Cache does not follow the idea of completely loading every netfs file +opened in its entirety into a cache before permitting it to be accessed and +then serving the pages out of that cache rather than the netfs inode because: + + (1) It must be practical to operate without a cache. + + (2) The size of any accessible file must not be limited to the size of the + cache. + + (3) The combined size of all opened files (this includes mapped libraries) + must not be limited to the size of the cache. + + (4) The user should not be forced to download an entire file just to do a + one-off access of a small portion of it (such as might be done with the + "file" program). + +It instead serves the cache out in PAGE_SIZE chunks as and when requested by +the netfs('s) using it. + + +FS-Cache provides the following facilities: + + (1) More than one cache can be used at once. Caches can be selected + explicitly by use of tags. + + (2) Caches can be added / removed at any time. + + (3) The netfs is provided with an interface that allows either party to + withdraw caching facilities from a file (required for (2)). + + (4) The interface to the netfs returns as few errors as possible, preferring + rather to let the netfs remain oblivious. + + (5) Cookies are used to represent indices, files and other objects to the + netfs. The simplest cookie is just a NULL pointer - indicating nothing + cached there. + + (6) The netfs is allowed to propose - dynamically - any index hierarchy it + desires, though it must be aware that the index search function is + recursive, stack space is limited, and indices can only be children of + indices. + + (7) Data I/O is done direct to and from the netfs's pages. The netfs + indicates that page A is at index B of the data-file represented by cookie + C, and that it should be read or written. The cache backend may or may + not start I/O on that page, but if it does, a netfs callback will be + invoked to indicate completion. The I/O may be either synchronous or + asynchronous. + + (8) Cookies can be "retired" upon release. At this point FS-Cache will mark + them as obsolete and the index hierarchy rooted at that point will get + recycled. + + (9) The netfs provides a "match" function for index searches. In addition to + saying whether a match was made or not, this can also specify that an + entry should be updated or deleted. + +(10) As much as possible is done asynchronously. + + +FS-Cache maintains a virtual indexing tree in which all indices, files, objects +and pages are kept. Bits of this tree may actually reside in one or more +caches. + + FSDEF + | + +------------------------------------+ + | | + NFS AFS + | | + +--------------------------+ +-----------+ + | | | | + homedir mirror afs.org redhat.com + | | | + +------------+ +---------------+ +----------+ + | | | | | | + 00001 00002 00007 00125 vol00001 vol00002 + | | | | | + +---+---+ +-----+ +---+ +------+------+ +-----+----+ + | | | | | | | | | | | | | +PG0 PG1 PG2 PG0 XATTR PG0 PG1 DIRENT DIRENT DIRENT R/W R/O Bak + | | + PG0 +-------+ + | | + 00001 00003 + | + +---+---+ + | | | + PG0 PG1 PG2 + +In the example above, you can see two netfs's being backed: NFS and AFS. These +have different index hierarchies: + + (*) The NFS primary index contains per-server indices. Each server index is + indexed by NFS file handles to get data file objects. Each data file + objects can have an array of pages, but may also have further child + objects, such as extended attributes and directory entries. Extended + attribute objects themselves have page-array contents. + + (*) The AFS primary index contains per-cell indices. Each cell index contains + per-logical-volume indices. Each of volume index contains up to three + indices for the read-write, read-only and backup mirrors of those volumes. + Each of these contains vnode data file objects, each of which contains an + array of pages. + +The very top index is the FS-Cache master index in which individual netfs's +have entries. + +Any index object may reside in more than one cache, provided it only has index +children. Any index with non-index object children will be assumed to only +reside in one cache. + + +The netfs API to FS-Cache can be found in: + + Documentation/filesystems/caching/netfs-api.txt + +The cache backend API to FS-Cache can be found in: + + Documentation/filesystems/caching/backend-api.txt + +A description of the internal representations and object state machine can be +found in: + + Documentation/filesystems/caching/object.txt + + +======================= +STATISTICAL INFORMATION +======================= + +If FS-Cache is compiled with the following options enabled: + + CONFIG_FSCACHE_STATS=y + CONFIG_FSCACHE_HISTOGRAM=y + +then it will gather certain statistics and display them through a number of +proc files. + + (*) /proc/fs/fscache/stats + + This shows counts of a number of events that can happen in FS-Cache: + + CLASS EVENT MEANING + ======= ======= ======================================================= + Cookies idx=N Number of index cookies allocated + dat=N Number of data storage cookies allocated + spc=N Number of special cookies allocated + Objects alc=N Number of objects allocated + nal=N Number of object allocation failures + avl=N Number of objects that reached the available state + ded=N Number of objects that reached the dead state + ChkAux non=N Number of objects that didn't have a coherency check + ok=N Number of objects that passed a coherency check + upd=N Number of objects that needed a coherency data update + obs=N Number of objects that were declared obsolete + Pages mrk=N Number of pages marked as being cached + unc=N Number of uncache page requests seen + Acquire n=N Number of acquire cookie requests seen + nul=N Number of acq reqs given a NULL parent + noc=N Number of acq reqs rejected due to no cache available + ok=N Number of acq reqs succeeded + nbf=N Number of acq reqs rejected due to error + oom=N Number of acq reqs failed on ENOMEM + Lookups n=N Number of lookup calls made on cache backends + neg=N Number of negative lookups made + pos=N Number of positive lookups made + crt=N Number of objects created by lookup + Updates n=N Number of update cookie requests seen + nul=N Number of upd reqs given a NULL parent + run=N Number of upd reqs granted CPU time + Relinqs n=N Number of relinquish cookie requests seen + nul=N Number of rlq reqs given a NULL parent + wcr=N Number of rlq reqs waited on completion of creation + AttrChg n=N Number of attribute changed requests seen + ok=N Number of attr changed requests queued + nbf=N Number of attr changed rejected -ENOBUFS + oom=N Number of attr changed failed -ENOMEM + run=N Number of attr changed ops given CPU time + Allocs n=N Number of allocation requests seen + ok=N Number of successful alloc reqs + wt=N Number of alloc reqs that waited on lookup completion + nbf=N Number of alloc reqs rejected -ENOBUFS + ops=N Number of alloc reqs submitted + owt=N Number of alloc reqs waited for CPU time + Retrvls n=N Number of retrieval (read) requests seen + ok=N Number of successful retr reqs + wt=N Number of retr reqs that waited on lookup completion + nod=N Number of retr reqs returned -ENODATA + nbf=N Number of retr reqs rejected -ENOBUFS + int=N Number of retr reqs aborted -ERESTARTSYS + oom=N Number of retr reqs failed -ENOMEM + ops=N Number of retr reqs submitted + owt=N Number of retr reqs waited for CPU time + Stores n=N Number of storage (write) requests seen + ok=N Number of successful store reqs + agn=N Number of store reqs on a page already pending storage + nbf=N Number of store reqs rejected -ENOBUFS + oom=N Number of store reqs failed -ENOMEM + ops=N Number of store reqs submitted + run=N Number of store reqs granted CPU time + Ops pend=N Number of times async ops added to pending queues + run=N Number of times async ops given CPU time + enq=N Number of times async ops queued for processing + dfr=N Number of async ops queued for deferred release + rel=N Number of async ops released + gc=N Number of deferred-release async ops garbage collected + + + (*) /proc/fs/fscache/histogram + + cat /proc/fs/fscache/histogram + JIFS SECS OBJ INST OP RUNS OBJ RUNS RETRV DLY RETRIEVLS + ===== ===== ========= ========= ========= ========= ========= + + This shows the breakdown of the number of times each amount of time + between 0 jiffies and HZ-1 jiffies a variety of tasks took to run. The + columns are as follows: + + COLUMN TIME MEASUREMENT + ======= ======================================================= + OBJ INST Length of time to instantiate an object + OP RUNS Length of time a call to process an operation took + OBJ RUNS Length of time a call to process an object event took + RETRV DLY Time between an requesting a read and lookup completing + RETRIEVLS Time between beginning and end of a retrieval + + Each row shows the number of events that took a particular range of times. + Each step is 1 jiffy in size. The JIFS column indicates the particular + jiffy range covered, and the SECS field the equivalent number of seconds. + + +========= +DEBUGGING +========= + +If CONFIG_FSCACHE_DEBUG is enabled, the FS-Cache facility can have runtime +debugging enabled by adjusting the value in: + + /sys/module/fscache/parameters/debug + +This is a bitmask of debugging streams to enable: + + BIT VALUE STREAM POINT + ======= ======= =============================== ======================= + 0 1 Cache management Function entry trace + 1 2 Function exit trace + 2 4 General + 3 8 Cookie management Function entry trace + 4 16 Function exit trace + 5 32 General + 6 64 Page handling Function entry trace + 7 128 Function exit trace + 8 256 General + 9 512 Operation management Function entry trace + 10 1024 Function exit trace + 11 2048 General + +The appropriate set of values should be OR'd together and the result written to +the control file. For example: + + echo $((1|8|64)) >/sys/module/fscache/parameters/debug + +will turn on all function entry debugging. diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt new file mode 100644 index 000000000000..4db125b3a5c6 --- /dev/null +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -0,0 +1,778 @@ + =============================== + FS-CACHE NETWORK FILESYSTEM API + =============================== + +There's an API by which a network filesystem can make use of the FS-Cache +facilities. This is based around a number of principles: + + (1) Caches can store a number of different object types. There are two main + object types: indices and files. The first is a special type used by + FS-Cache to make finding objects faster and to make retiring of groups of + objects easier. + + (2) Every index, file or other object is represented by a cookie. This cookie + may or may not have anything associated with it, but the netfs doesn't + need to care. + + (3) Barring the top-level index (one entry per cached netfs), the index + hierarchy for each netfs is structured according the whim of the netfs. + +This API is declared in <linux/fscache.h>. + +This document contains the following sections: + + (1) Network filesystem definition + (2) Index definition + (3) Object definition + (4) Network filesystem (un)registration + (5) Cache tag lookup + (6) Index registration + (7) Data file registration + (8) Miscellaneous object registration + (9) Setting the data file size + (10) Page alloc/read/write + (11) Page uncaching + (12) Index and data file update + (13) Miscellaneous cookie operations + (14) Cookie unregistration + (15) Index and data file invalidation + (16) FS-Cache specific page flags. + + +============================= +NETWORK FILESYSTEM DEFINITION +============================= + +FS-Cache needs a description of the network filesystem. This is specified +using a record of the following structure: + + struct fscache_netfs { + uint32_t version; + const char *name; + struct fscache_cookie *primary_index; + ... + }; + +This first two fields should be filled in before registration, and the third +will be filled in by the registration function; any other fields should just be +ignored and are for internal use only. + +The fields are: + + (1) The name of the netfs (used as the key in the toplevel index). + + (2) The version of the netfs (if the name matches but the version doesn't, the + entire in-cache hierarchy for this netfs will be scrapped and begun + afresh). + + (3) The cookie representing the primary index will be allocated according to + another parameter passed into the registration function. + +For example, kAFS (linux/fs/afs/) uses the following definitions to describe +itself: + + struct fscache_netfs afs_cache_netfs = { + .version = 0, + .name = "afs", + }; + + +================ +INDEX DEFINITION +================ + +Indices are used for two purposes: + + (1) To aid the finding of a file based on a series of keys (such as AFS's + "cell", "volume ID", "vnode ID"). + + (2) To make it easier to discard a subset of all the files cached based around + a particular key - for instance to mirror the removal of an AFS volume. + +However, since it's unlikely that any two netfs's are going to want to define +their index hierarchies in quite the same way, FS-Cache tries to impose as few +restraints as possible on how an index is structured and where it is placed in +the tree. The netfs can even mix indices and data files at the same level, but +it's not recommended. + +Each index entry consists of a key of indeterminate length plus some auxilliary +data, also of indeterminate length. + +There are some limits on indices: + + (1) Any index containing non-index objects should be restricted to a single + cache. Any such objects created within an index will be created in the + first cache only. The cache in which an index is created can be + controlled by cache tags (see below). + + (2) The entry data must be atomically journallable, so it is limited to about + 400 bytes at present. At least 400 bytes will be available. + + (3) The depth of the index tree should be judged with care as the search + function is recursive. Too many layers will run the kernel out of stack. + + +================= +OBJECT DEFINITION +================= + +To define an object, a structure of the following type should be filled out: + + struct fscache_cookie_def + { + uint8_t name[16]; + uint8_t type; + + struct fscache_cache_tag *(*select_cache)( + const void *parent_netfs_data, + const void *cookie_netfs_data); + + uint16_t (*get_key)(const void *cookie_netfs_data, + void *buffer, + uint16_t bufmax); + + void (*get_attr)(const void *cookie_netfs_data, + uint64_t *size); + + uint16_t (*get_aux)(const void *cookie_netfs_data, + void *buffer, + uint16_t bufmax); + + enum fscache_checkaux (*check_aux)(void *cookie_netfs_data, + const void *data, + uint16_t datalen); + + void (*get_context)(void *cookie_netfs_data, void *context); + + void (*put_context)(void *cookie_netfs_data, void *context); + + void (*mark_pages_cached)(void *cookie_netfs_data, + struct address_space *mapping, + struct pagevec *cached_pvec); + + void (*now_uncached)(void *cookie_netfs_data); + }; + +This has the following fields: + + (1) The type of the object [mandatory]. + + This is one of the following values: + + (*) FSCACHE_COOKIE_TYPE_INDEX + + This defines an index, which is a special FS-Cache type. + + (*) FSCACHE_COOKIE_TYPE_DATAFILE + + This defines an ordinary data file. + + (*) Any other value between 2 and 255 + + This defines an extraordinary object such as an XATTR. + + (2) The name of the object type (NUL terminated unless all 16 chars are used) + [optional]. + + (3) A function to select the cache in which to store an index [optional]. + + This function is invoked when an index needs to be instantiated in a cache + during the instantiation of a non-index object. Only the immediate index + parent for the non-index object will be queried. Any indices above that + in the hierarchy may be stored in multiple caches. This function does not + need to be supplied for any non-index object or any index that will only + have index children. + + If this function is not supplied or if it returns NULL then the first + cache in the parent's list will be chosed, or failing that, the first + cache in the master list. + + (4) A function to retrieve an object's key from the netfs [mandatory]. + + This function will be called with the netfs data that was passed to the + cookie acquisition function and the maximum length of key data that it may + provide. It should write the required key data into the given buffer and + return the quantity it wrote. + + (5) A function to retrieve attribute data from the netfs [optional]. + + This function will be called with the netfs data that was passed to the + cookie acquisition function. It should return the size of the file if + this is a data file. The size may be used to govern how much cache must + be reserved for this file in the cache. + + If the function is absent, a file size of 0 is assumed. + + (6) A function to retrieve auxilliary data from the netfs [optional]. + + This function will be called with the netfs data that was passed to the + cookie acquisition function and the maximum length of auxilliary data that + it may provide. It should write the auxilliary data into the given buffer + and return the quantity it wrote. + + If this function is absent, the auxilliary data length will be set to 0. + + The length of the auxilliary data buffer may be dependent on the key + length. A netfs mustn't rely on being able to provide more than 400 bytes + for both. + + (7) A function to check the auxilliary data [optional]. + + This function will be called to check that a match found in the cache for + this object is valid. For instance with AFS it could check the auxilliary + data against the data version number returned by the server to determine + whether the index entry in a cache is still valid. + + If this function is absent, it will be assumed that matching objects in a + cache are always valid. + + If present, the function should return one of the following values: + + (*) FSCACHE_CHECKAUX_OKAY - the entry is okay as is + (*) FSCACHE_CHECKAUX_NEEDS_UPDATE - the entry requires update + (*) FSCACHE_CHECKAUX_OBSOLETE - the entry should be deleted + + This function can also be used to extract data from the auxilliary data in + the cache and copy it into the netfs's structures. + + (8) A pair of functions to manage contexts for the completion callback + [optional]. + + The cache read/write functions are passed a context which is then passed + to the I/O completion callback function. To ensure this context remains + valid until after the I/O completion is called, two functions may be + provided: one to get an extra reference on the context, and one to drop a + reference to it. + + If the context is not used or is a type of object that won't go out of + scope, then these functions are not required. These functions are not + required for indices as indices may not contain data. These functions may + be called in interrupt context and so may not sleep. + + (9) A function to mark a page as retaining cache metadata [optional]. + + This is called by the cache to indicate that it is retaining in-memory + information for this page and that the netfs should uncache the page when + it has finished. This does not indicate whether there's data on the disk + or not. Note that several pages at once may be presented for marking. + + The PG_fscache bit is set on the pages before this function would be + called, so the function need not be provided if this is sufficient. + + This function is not required for indices as they're not permitted data. + +(10) A function to unmark all the pages retaining cache metadata [mandatory]. + + This is called by FS-Cache to indicate that a backing store is being + unbound from a cookie and that all the marks on the pages should be + cleared to prevent confusion. Note that the cache will have torn down all + its tracking information so that the pages don't need to be explicitly + uncached. + + This function is not required for indices as they're not permitted data. + + +=================================== +NETWORK FILESYSTEM (UN)REGISTRATION +=================================== + +The first step is to declare the network filesystem to the cache. This also +involves specifying the layout of the primary index (for AFS, this would be the +"cell" level). + +The registration function is: + + int fscache_register_netfs(struct fscache_netfs *netfs); + +It just takes a pointer to the netfs definition. It returns 0 or an error as +appropriate. + +For kAFS, registration is done as follows: + + ret = fscache_register_netfs(&afs_cache_netfs); + +The last step is, of course, unregistration: + + void fscache_unregister_netfs(struct fscache_netfs *netfs); + + +================ +CACHE TAG LOOKUP +================ + +FS-Cache permits the use of more than one cache. To permit particular index +subtrees to be bound to particular caches, the second step is to look up cache +representation tags. This step is optional; it can be left entirely up to +FS-Cache as to which cache should be used. The problem with doing that is that +FS-Cache will always pick the first cache that was registered. + +To get the representation for a named tag: + + struct fscache_cache_tag *fscache_lookup_cache_tag(const char *name); + +This takes a text string as the name and returns a representation of a tag. It +will never return an error. It may return a dummy tag, however, if it runs out +of memory; this will inhibit caching with this tag. + +Any representation so obtained must be released by passing it to this function: + + void fscache_release_cache_tag(struct fscache_cache_tag *tag); + +The tag will be retrieved by FS-Cache when it calls the object definition +operation select_cache(). + + +================== +INDEX REGISTRATION +================== + +The third step is to inform FS-Cache about part of an index hierarchy that can +be used to locate files. This is done by requesting a cookie for each index in +the path to the file: + + struct fscache_cookie * + fscache_acquire_cookie(struct fscache_cookie *parent, + const struct fscache_object_def *def, + void *netfs_data); + +This function creates an index entry in the index represented by parent, +filling in the index entry by calling the operations pointed to by def. + +Note that this function never returns an error - all errors are handled +internally. It may, however, return NULL to indicate no cookie. It is quite +acceptable to pass this token back to this function as the parent to another +acquisition (or even to the relinquish cookie, read page and write page +functions - see below). + +Note also that no indices are actually created in a cache until a non-index +object needs to be created somewhere down the hierarchy. Furthermore, an index +may be created in several different caches independently at different times. +This is all handled transparently, and the netfs doesn't see any of it. + +For example, with AFS, a cell would be added to the primary index. This index +entry would have a dependent inode containing a volume location index for the +volume mappings within this cell: + + cell->cache = + fscache_acquire_cookie(afs_cache_netfs.primary_index, + &afs_cell_cache_index_def, + cell); + +Then when a volume location was accessed, it would be entered into the cell's +index and an inode would be allocated that acts as a volume type and hash chain +combination: + + vlocation->cache = + fscache_acquire_cookie(cell->cache, + &afs_vlocation_cache_index_def, + vlocation); + +And then a particular flavour of volume (R/O for example) could be added to +that index, creating another index for vnodes (AFS inode equivalents): + + volume->cache = + fscache_acquire_cookie(vlocation->cache, + &afs_volume_cache_index_def, + volume); + + +====================== +DATA FILE REGISTRATION +====================== + +The fourth step is to request a data file be created in the cache. This is +identical to index cookie acquisition. The only difference is that the type in +the object definition should be something other than index type. + + vnode->cache = + fscache_acquire_cookie(volume->cache, + &afs_vnode_cache_object_def, + vnode); + + +================================= +MISCELLANEOUS OBJECT REGISTRATION +================================= + +An optional step is to request an object of miscellaneous type be created in +the cache. This is almost identical to index cookie acquisition. The only +difference is that the type in the object definition should be something other +than index type. Whilst the parent object could be an index, it's more likely +it would be some other type of object such as a data file. + + xattr->cache = + fscache_acquire_cookie(vnode->cache, + &afs_xattr_cache_object_def, + xattr); + +Miscellaneous objects might be used to store extended attributes or directory +entries for example. + + +========================== +SETTING THE DATA FILE SIZE +========================== + +The fifth step is to set the physical attributes of the file, such as its size. +This doesn't automatically reserve any space in the cache, but permits the +cache to adjust its metadata for data tracking appropriately: + + int fscache_attr_changed(struct fscache_cookie *cookie); + +The cache will return -ENOBUFS if there is no backing cache or if there is no +space to allocate any extra metadata required in the cache. The attributes +will be accessed with the get_attr() cookie definition operation. + +Note that attempts to read or write data pages in the cache over this size may +be rebuffed with -ENOBUFS. + +This operation schedules an attribute adjustment to happen asynchronously at +some point in the future, and as such, it may happen after the function returns +to the caller. The attribute adjustment excludes read and write operations. + + +===================== +PAGE READ/ALLOC/WRITE +===================== + +And the sixth step is to store and retrieve pages in the cache. There are +three functions that are used to do this. + +Note: + + (1) A page should not be re-read or re-allocated without uncaching it first. + + (2) A read or allocated page must be uncached when the netfs page is released + from the pagecache. + + (3) A page should only be written to the cache if previous read or allocated. + +This permits the cache to maintain its page tracking in proper order. + + +PAGE READ +--------- + +Firstly, the netfs should ask FS-Cache to examine the caches and read the +contents cached for a particular page of a particular file if present, or else +allocate space to store the contents if not: + + typedef + void (*fscache_rw_complete_t)(struct page *page, + void *context, + int error); + + int fscache_read_or_alloc_page(struct fscache_cookie *cookie, + struct page *page, + fscache_rw_complete_t end_io_func, + void *context, + gfp_t gfp); + +The cookie argument must specify a cookie for an object that isn't an index, +the page specified will have the data loaded into it (and is also used to +specify the page number), and the gfp argument is used to control how any +memory allocations made are satisfied. + +If the cookie indicates the inode is not cached: + + (1) The function will return -ENOBUFS. + +Else if there's a copy of the page resident in the cache: + + (1) The mark_pages_cached() cookie operation will be called on that page. + + (2) The function will submit a request to read the data from the cache's + backing device directly into the page specified. + + (3) The function will return 0. + + (4) When the read is complete, end_io_func() will be invoked with: + + (*) The netfs data supplied when the cookie was created. + + (*) The page descriptor. + + (*) The context argument passed to the above function. This will be + maintained with the get_context/put_context functions mentioned above. + + (*) An argument that's 0 on success or negative for an error code. + + If an error occurs, it should be assumed that the page contains no usable + data. + + end_io_func() will be called in process context if the read is results in + an error, but it might be called in interrupt context if the read is + successful. + +Otherwise, if there's not a copy available in cache, but the cache may be able +to store the page: + + (1) The mark_pages_cached() cookie operation will be called on that page. + + (2) A block may be reserved in the cache and attached to the object at the + appropriate place. + + (3) The function will return -ENODATA. + +This function may also return -ENOMEM or -EINTR, in which case it won't have +read any data from the cache. + + +PAGE ALLOCATE +------------- + +Alternatively, if there's not expected to be any data in the cache for a page +because the file has been extended, a block can simply be allocated instead: + + int fscache_alloc_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp); + +This is similar to the fscache_read_or_alloc_page() function, except that it +never reads from the cache. It will return 0 if a block has been allocated, +rather than -ENODATA as the other would. One or the other must be performed +before writing to the cache. + +The mark_pages_cached() cookie operation will be called on the page if +successful. + + +PAGE WRITE +---------- + +Secondly, if the netfs changes the contents of the page (either due to an +initial download or if a user performs a write), then the page should be +written back to the cache: + + int fscache_write_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp); + +The cookie argument must specify a data file cookie, the page specified should +contain the data to be written (and is also used to specify the page number), +and the gfp argument is used to control how any memory allocations made are +satisfied. + +The page must have first been read or allocated successfully and must not have +been uncached before writing is performed. + +If the cookie indicates the inode is not cached then: + + (1) The function will return -ENOBUFS. + +Else if space can be allocated in the cache to hold this page: + + (1) PG_fscache_write will be set on the page. + + (2) The function will submit a request to write the data to cache's backing + device directly from the page specified. + + (3) The function will return 0. + + (4) When the write is complete PG_fscache_write is cleared on the page and + anyone waiting for that bit will be woken up. + +Else if there's no space available in the cache, -ENOBUFS will be returned. It +is also possible for the PG_fscache_write bit to be cleared when no write took +place if unforeseen circumstances arose (such as a disk error). + +Writing takes place asynchronously. + + +MULTIPLE PAGE READ +------------------ + +A facility is provided to read several pages at once, as requested by the +readpages() address space operation: + + int fscache_read_or_alloc_pages(struct fscache_cookie *cookie, + struct address_space *mapping, + struct list_head *pages, + int *nr_pages, + fscache_rw_complete_t end_io_func, + void *context, + gfp_t gfp); + +This works in a similar way to fscache_read_or_alloc_page(), except: + + (1) Any page it can retrieve data for is removed from pages and nr_pages and + dispatched for reading to the disk. Reads of adjacent pages on disk may + be merged for greater efficiency. + + (2) The mark_pages_cached() cookie operation will be called on several pages + at once if they're being read or allocated. + + (3) If there was an general error, then that error will be returned. + + Else if some pages couldn't be allocated or read, then -ENOBUFS will be + returned. + + Else if some pages couldn't be read but were allocated, then -ENODATA will + be returned. + + Otherwise, if all pages had reads dispatched, then 0 will be returned, the + list will be empty and *nr_pages will be 0. + + (4) end_io_func will be called once for each page being read as the reads + complete. It will be called in process context if error != 0, but it may + be called in interrupt context if there is no error. + +Note that a return of -ENODATA, -ENOBUFS or any other error does not preclude +some of the pages being read and some being allocated. Those pages will have +been marked appropriately and will need uncaching. + + +============== +PAGE UNCACHING +============== + +To uncache a page, this function should be called: + + void fscache_uncache_page(struct fscache_cookie *cookie, + struct page *page); + +This function permits the cache to release any in-memory representation it +might be holding for this netfs page. This function must be called once for +each page on which the read or write page functions above have been called to +make sure the cache's in-memory tracking information gets torn down. + +Note that pages can't be explicitly deleted from the a data file. The whole +data file must be retired (see the relinquish cookie function below). + +Furthermore, note that this does not cancel the asynchronous read or write +operation started by the read/alloc and write functions, so the page +invalidation and release functions must use: + + bool fscache_check_page_write(struct fscache_cookie *cookie, + struct page *page); + +to see if a page is being written to the cache, and: + + void fscache_wait_on_page_write(struct fscache_cookie *cookie, + struct page *page); + +to wait for it to finish if it is. + + +========================== +INDEX AND DATA FILE UPDATE +========================== + +To request an update of the index data for an index or other object, the +following function should be called: + + void fscache_update_cookie(struct fscache_cookie *cookie); + +This function will refer back to the netfs_data pointer stored in the cookie by +the acquisition function to obtain the data to write into each revised index +entry. The update method in the parent index definition will be called to +transfer the data. + +Note that partial updates may happen automatically at other times, such as when +data blocks are added to a data file object. + + +=============================== +MISCELLANEOUS COOKIE OPERATIONS +=============================== + +There are a number of operations that can be used to control cookies: + + (*) Cookie pinning: + + int fscache_pin_cookie(struct fscache_cookie *cookie); + void fscache_unpin_cookie(struct fscache_cookie *cookie); + + These operations permit data cookies to be pinned into the cache and to + have the pinning removed. They are not permitted on index cookies. + + The pinning function will return 0 if successful, -ENOBUFS in the cookie + isn't backed by a cache, -EOPNOTSUPP if the cache doesn't support pinning, + -ENOSPC if there isn't enough space to honour the operation, -ENOMEM or + -EIO if there's any other problem. + + (*) Data space reservation: + + int fscache_reserve_space(struct fscache_cookie *cookie, loff_t size); + + This permits a netfs to request cache space be reserved to store up to the + given amount of a file. It is permitted to ask for more than the current + size of the file to allow for future file expansion. + + If size is given as zero then the reservation will be cancelled. + + The function will return 0 if successful, -ENOBUFS in the cookie isn't + backed by a cache, -EOPNOTSUPP if the cache doesn't support reservations, + -ENOSPC if there isn't enough space to honour the operation, -ENOMEM or + -EIO if there's any other problem. + + Note that this doesn't pin an object in a cache; it can still be culled to + make space if it's not in use. + + +===================== +COOKIE UNREGISTRATION +===================== + +To get rid of a cookie, this function should be called. + + void fscache_relinquish_cookie(struct fscache_cookie *cookie, + int retire); + +If retire is non-zero, then the object will be marked for recycling, and all +copies of it will be removed from all active caches in which it is present. +Not only that but all child objects will also be retired. + +If retire is zero, then the object may be available again when next the +acquisition function is called. Retirement here will overrule the pinning on a +cookie. + +One very important note - relinquish must NOT be called for a cookie unless all +the cookies for "child" indices, objects and pages have been relinquished +first. + + +================================ +INDEX AND DATA FILE INVALIDATION +================================ + +There is no direct way to invalidate an index subtree or a data file. To do +this, the caller should relinquish and retire the cookie they have, and then +acquire a new one. + + +=========================== +FS-CACHE SPECIFIC PAGE FLAG +=========================== + +FS-Cache makes use of a page flag, PG_private_2, for its own purpose. This is +given the alternative name PG_fscache. + +PG_fscache is used to indicate that the page is known by the cache, and that +the cache must be informed if the page is going to go away. It's an indication +to the netfs that the cache has an interest in this page, where an interest may +be a pointer to it, resources allocated or reserved for it, or I/O in progress +upon it. + +The netfs can use this information in methods such as releasepage() to +determine whether it needs to uncache a page or update it. + +Furthermore, if this bit is set, releasepage() and invalidatepage() operations +will be called on a page to get rid of it, even if PG_private is not set. This +allows caching to attempted on a page before read_cache_pages() to be called +after fscache_read_or_alloc_pages() as the former will try and release pages it +was given under certain circumstances. + +This bit does not overlap with such as PG_private. This means that FS-Cache +can be used with a filesystem that uses the block buffering code. + +There are a number of operations defined on this flag: + + int PageFsCache(struct page *page); + void SetPageFsCache(struct page *page) + void ClearPageFsCache(struct page *page) + int TestSetPageFsCache(struct page *page) + int TestClearPageFsCache(struct page *page) + +These functions are bit test, bit set, bit clear, bit test and set and bit +test and clear operations on PG_fscache. diff --git a/Documentation/filesystems/caching/object.txt b/Documentation/filesystems/caching/object.txt new file mode 100644 index 000000000000..e8b0a35d8fe5 --- /dev/null +++ b/Documentation/filesystems/caching/object.txt @@ -0,0 +1,313 @@ + ==================================================== + IN-KERNEL CACHE OBJECT REPRESENTATION AND MANAGEMENT + ==================================================== + +By: David Howells <dhowells@redhat.com> + +Contents: + + (*) Representation + + (*) Object management state machine. + + - Provision of cpu time. + - Locking simplification. + + (*) The set of states. + + (*) The set of events. + + +============== +REPRESENTATION +============== + +FS-Cache maintains an in-kernel representation of each object that a netfs is +currently interested in. Such objects are represented by the fscache_cookie +struct and are referred to as cookies. + +FS-Cache also maintains a separate in-kernel representation of the objects that +a cache backend is currently actively caching. Such objects are represented by +the fscache_object struct. The cache backends allocate these upon request, and +are expected to embed them in their own representations. These are referred to +as objects. + +There is a 1:N relationship between cookies and objects. A cookie may be +represented by multiple objects - an index may exist in more than one cache - +or even by no objects (it may not be cached). + +Furthermore, both cookies and objects are hierarchical. The two hierarchies +correspond, but the cookies tree is a superset of the union of the object trees +of multiple caches: + + NETFS INDEX TREE : CACHE 1 : CACHE 2 + : : + : +-----------+ : + +----------->| IObject | : + +-----------+ | : +-----------+ : + | ICookie |-------+ : | : + +-----------+ | : | : +-----------+ + | +------------------------------>| IObject | + | : | : +-----------+ + | : V : | + | : +-----------+ : | + V +----------->| IObject | : | + +-----------+ | : +-----------+ : | + | ICookie |-------+ : | : V + +-----------+ | : | : +-----------+ + | +------------------------------>| IObject | + +-----+-----+ : | : +-----------+ + | | : | : | + V | : V : | + +-----------+ | : +-----------+ : | + | ICookie |------------------------->| IObject | : | + +-----------+ | : +-----------+ : | + | V : | : V + | +-----------+ : | : +-----------+ + | | ICookie |-------------------------------->| IObject | + | +-----------+ : | : +-----------+ + V | : V : | + +-----------+ | : +-----------+ : | + | DCookie |------------------------->| DObject | : | + +-----------+ | : +-----------+ : | + | : : | + +-------+-------+ : : | + | | : : | + V V : : V + +-----------+ +-----------+ : : +-----------+ + | DCookie | | DCookie |------------------------>| DObject | + +-----------+ +-----------+ : : +-----------+ + : : + +In the above illustration, ICookie and IObject represent indices and DCookie +and DObject represent data storage objects. Indices may have representation in +multiple caches, but currently, non-index objects may not. Objects of any type +may also be entirely unrepresented. + +As far as the netfs API goes, the netfs is only actually permitted to see +pointers to the cookies. The cookies themselves and any objects attached to +those cookies are hidden from it. + + +=============================== +OBJECT MANAGEMENT STATE MACHINE +=============================== + +Within FS-Cache, each active object is managed by its own individual state +machine. The state for an object is kept in the fscache_object struct, in +object->state. A cookie may point to a set of objects that are in different +states. + +Each state has an action associated with it that is invoked when the machine +wakes up in that state. There are four logical sets of states: + + (1) Preparation: states that wait for the parent objects to become ready. The + representations are hierarchical, and it is expected that an object must + be created or accessed with respect to its parent object. + + (2) Initialisation: states that perform lookups in the cache and validate + what's found and that create on disk any missing metadata. + + (3) Normal running: states that allow netfs operations on objects to proceed + and that update the state of objects. + + (4) Termination: states that detach objects from their netfs cookies, that + delete objects from disk, that handle disk and system errors and that free + up in-memory resources. + + +In most cases, transitioning between states is in response to signalled events. +When a state has finished processing, it will usually set the mask of events in +which it is interested (object->event_mask) and relinquish the worker thread. +Then when an event is raised (by calling fscache_raise_event()), if the event +is not masked, the object will be queued for processing (by calling +fscache_enqueue_object()). + + +PROVISION OF CPU TIME +--------------------- + +The work to be done by the various states is given CPU time by the threads of +the slow work facility (see Documentation/slow-work.txt). This is used in +preference to the workqueue facility because: + + (1) Threads may be completely occupied for very long periods of time by a + particular work item. These state actions may be doing sequences of + synchronous, journalled disk accesses (lookup, mkdir, create, setxattr, + getxattr, truncate, unlink, rmdir, rename). + + (2) Threads may do little actual work, but may rather spend a lot of time + sleeping on I/O. This means that single-threaded and 1-per-CPU-threaded + workqueues don't necessarily have the right numbers of threads. + + +LOCKING SIMPLIFICATION +---------------------- + +Because only one worker thread may be operating on any particular object's +state machine at once, this simplifies the locking, particularly with respect +to disconnecting the netfs's representation of a cache object (fscache_cookie) +from the cache backend's representation (fscache_object) - which may be +requested from either end. + + +================= +THE SET OF STATES +================= + +The object state machine has a set of states that it can be in. There are +preparation states in which the object sets itself up and waits for its parent +object to transit to a state that allows access to its children: + + (1) State FSCACHE_OBJECT_INIT. + + Initialise the object and wait for the parent object to become active. In + the cache, it is expected that it will not be possible to look an object + up from the parent object, until that parent object itself has been looked + up. + +There are initialisation states in which the object sets itself up and accesses +disk for the object metadata: + + (2) State FSCACHE_OBJECT_LOOKING_UP. + + Look up the object on disk, using the parent as a starting point. + FS-Cache expects the cache backend to probe the cache to see whether this + object is represented there, and if it is, to see if it's valid (coherency + management). + + The cache should call fscache_object_lookup_negative() to indicate lookup + failure for whatever reason, and should call fscache_obtained_object() to + indicate success. + + At the completion of lookup, FS-Cache will let the netfs go ahead with + read operations, no matter whether the file is yet cached. If not yet + cached, read operations will be immediately rejected with ENODATA until + the first known page is uncached - as to that point there can be no data + to be read out of the cache for that file that isn't currently also held + in the pagecache. + + (3) State FSCACHE_OBJECT_CREATING. + + Create an object on disk, using the parent as a starting point. This + happens if the lookup failed to find the object, or if the object's + coherency data indicated what's on disk is out of date. In this state, + FS-Cache expects the cache to create + + The cache should call fscache_obtained_object() if creation completes + successfully, fscache_object_lookup_negative() otherwise. + + At the completion of creation, FS-Cache will start processing write + operations the netfs has queued for an object. If creation failed, the + write ops will be transparently discarded, and nothing recorded in the + cache. + +There are some normal running states in which the object spends its time +servicing netfs requests: + + (4) State FSCACHE_OBJECT_AVAILABLE. + + A transient state in which pending operations are started, child objects + are permitted to advance from FSCACHE_OBJECT_INIT state, and temporary + lookup data is freed. + + (5) State FSCACHE_OBJECT_ACTIVE. + + The normal running state. In this state, requests the netfs makes will be + passed on to the cache. + + (6) State FSCACHE_OBJECT_UPDATING. + + The state machine comes here to update the object in the cache from the + netfs's records. This involves updating the auxiliary data that is used + to maintain coherency. + +And there are terminal states in which an object cleans itself up, deallocates +memory and potentially deletes stuff from disk: + + (7) State FSCACHE_OBJECT_LC_DYING. + + The object comes here if it is dying because of a lookup or creation + error. This would be due to a disk error or system error of some sort. + Temporary data is cleaned up, and the parent is released. + + (8) State FSCACHE_OBJECT_DYING. + + The object comes here if it is dying due to an error, because its parent + cookie has been relinquished by the netfs or because the cache is being + withdrawn. + + Any child objects waiting on this one are given CPU time so that they too + can destroy themselves. This object waits for all its children to go away + before advancing to the next state. + + (9) State FSCACHE_OBJECT_ABORT_INIT. + + The object comes to this state if it was waiting on its parent in + FSCACHE_OBJECT_INIT, but its parent died. The object will destroy itself + so that the parent may proceed from the FSCACHE_OBJECT_DYING state. + +(10) State FSCACHE_OBJECT_RELEASING. +(11) State FSCACHE_OBJECT_RECYCLING. + + The object comes to one of these two states when dying once it is rid of + all its children, if it is dying because the netfs relinquished its + cookie. In the first state, the cached data is expected to persist, and + in the second it will be deleted. + +(12) State FSCACHE_OBJECT_WITHDRAWING. + + The object transits to this state if the cache decides it wants to + withdraw the object from service, perhaps to make space, but also due to + error or just because the whole cache is being withdrawn. + +(13) State FSCACHE_OBJECT_DEAD. + + The object transits to this state when the in-memory object record is + ready to be deleted. The object processor shouldn't ever see an object in + this state. + + +THE SET OF EVENTS +----------------- + +There are a number of events that can be raised to an object state machine: + + (*) FSCACHE_OBJECT_EV_UPDATE + + The netfs requested that an object be updated. The state machine will ask + the cache backend to update the object, and the cache backend will ask the + netfs for details of the change through its cookie definition ops. + + (*) FSCACHE_OBJECT_EV_CLEARED + + This is signalled in two circumstances: + + (a) when an object's last child object is dropped and + + (b) when the last operation outstanding on an object is completed. + + This is used to proceed from the dying state. + + (*) FSCACHE_OBJECT_EV_ERROR + + This is signalled when an I/O error occurs during the processing of some + object. + + (*) FSCACHE_OBJECT_EV_RELEASE + (*) FSCACHE_OBJECT_EV_RETIRE + + These are signalled when the netfs relinquishes a cookie it was using. + The event selected depends on whether the netfs asks for the backing + object to be retired (deleted) or retained. + + (*) FSCACHE_OBJECT_EV_WITHDRAW + + This is signalled when the cache backend wants to withdraw an object. + This means that the object will have to be detached from the netfs's + cookie. + +Because the withdrawing releasing/retiring events are all handled by the object +state machine, it doesn't matter if there's a collision with both ends trying +to sever the connection at the same time. The state machine can just pick +which one it wants to honour, and that effects the other. diff --git a/Documentation/filesystems/caching/operations.txt b/Documentation/filesystems/caching/operations.txt new file mode 100644 index 000000000000..b6b070c57cbf --- /dev/null +++ b/Documentation/filesystems/caching/operations.txt @@ -0,0 +1,213 @@ + ================================ + ASYNCHRONOUS OPERATIONS HANDLING + ================================ + +By: David Howells <dhowells@redhat.com> + +Contents: + + (*) Overview. + + (*) Operation record initialisation. + + (*) Parameters. + + (*) Procedure. + + (*) Asynchronous callback. + + +======== +OVERVIEW +======== + +FS-Cache has an asynchronous operations handling facility that it uses for its +data storage and retrieval routines. Its operations are represented by +fscache_operation structs, though these are usually embedded into some other +structure. + +This facility is available to and expected to be be used by the cache backends, +and FS-Cache will create operations and pass them off to the appropriate cache +backend for completion. + +To make use of this facility, <linux/fscache-cache.h> should be #included. + + +=============================== +OPERATION RECORD INITIALISATION +=============================== + +An operation is recorded in an fscache_operation struct: + + struct fscache_operation { + union { + struct work_struct fast_work; + struct slow_work slow_work; + }; + unsigned long flags; + fscache_operation_processor_t processor; + ... + }; + +Someone wanting to issue an operation should allocate something with this +struct embedded in it. They should initialise it by calling: + + void fscache_operation_init(struct fscache_operation *op, + fscache_operation_release_t release); + +with the operation to be initialised and the release function to use. + +The op->flags parameter should be set to indicate the CPU time provision and +the exclusivity (see the Parameters section). + +The op->fast_work, op->slow_work and op->processor flags should be set as +appropriate for the CPU time provision (see the Parameters section). + +FSCACHE_OP_WAITING may be set in op->flags prior to each submission of the +operation and waited for afterwards. + + +========== +PARAMETERS +========== + +There are a number of parameters that can be set in the operation record's flag +parameter. There are three options for the provision of CPU time in these +operations: + + (1) The operation may be done synchronously (FSCACHE_OP_MYTHREAD). A thread + may decide it wants to handle an operation itself without deferring it to + another thread. + + This is, for example, used in read operations for calling readpages() on + the backing filesystem in CacheFiles. Although readpages() does an + asynchronous data fetch, the determination of whether pages exist is done + synchronously - and the netfs does not proceed until this has been + determined. + + If this option is to be used, FSCACHE_OP_WAITING must be set in op->flags + before submitting the operation, and the operating thread must wait for it + to be cleared before proceeding: + + wait_on_bit(&op->flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + + + (2) The operation may be fast asynchronous (FSCACHE_OP_FAST), in which case it + will be given to keventd to process. Such an operation is not permitted + to sleep on I/O. + + This is, for example, used by CacheFiles to copy data from a backing fs + page to a netfs page after the backing fs has read the page in. + + If this option is used, op->fast_work and op->processor must be + initialised before submitting the operation: + + INIT_WORK(&op->fast_work, do_some_work); + + + (3) The operation may be slow asynchronous (FSCACHE_OP_SLOW), in which case it + will be given to the slow work facility to process. Such an operation is + permitted to sleep on I/O. + + This is, for example, used by FS-Cache to handle background writes of + pages that have just been fetched from a remote server. + + If this option is used, op->slow_work and op->processor must be + initialised before submitting the operation: + + fscache_operation_init_slow(op, processor) + + +Furthermore, operations may be one of two types: + + (1) Exclusive (FSCACHE_OP_EXCLUSIVE). Operations of this type may not run in + conjunction with any other operation on the object being operated upon. + + An example of this is the attribute change operation, in which the file + being written to may need truncation. + + (2) Shareable. Operations of this type may be running simultaneously. It's + up to the operation implementation to prevent interference between other + operations running at the same time. + + +========= +PROCEDURE +========= + +Operations are used through the following procedure: + + (1) The submitting thread must allocate the operation and initialise it + itself. Normally this would be part of a more specific structure with the + generic op embedded within. + + (2) The submitting thread must then submit the operation for processing using + one of the following two functions: + + int fscache_submit_op(struct fscache_object *object, + struct fscache_operation *op); + + int fscache_submit_exclusive_op(struct fscache_object *object, + struct fscache_operation *op); + + The first function should be used to submit non-exclusive ops and the + second to submit exclusive ones. The caller must still set the + FSCACHE_OP_EXCLUSIVE flag. + + If successful, both functions will assign the operation to the specified + object and return 0. -ENOBUFS will be returned if the object specified is + permanently unavailable. + + The operation manager will defer operations on an object that is still + undergoing lookup or creation. The operation will also be deferred if an + operation of conflicting exclusivity is in progress on the object. + + If the operation is asynchronous, the manager will retain a reference to + it, so the caller should put their reference to it by passing it to: + + void fscache_put_operation(struct fscache_operation *op); + + (3) If the submitting thread wants to do the work itself, and has marked the + operation with FSCACHE_OP_MYTHREAD, then it should monitor + FSCACHE_OP_WAITING as described above and check the state of the object if + necessary (the object might have died whilst the thread was waiting). + + When it has finished doing its processing, it should call + fscache_put_operation() on it. + + (4) The operation holds an effective lock upon the object, preventing other + exclusive ops conflicting until it is released. The operation can be + enqueued for further immediate asynchronous processing by adjusting the + CPU time provisioning option if necessary, eg: + + op->flags &= ~FSCACHE_OP_TYPE; + op->flags |= ~FSCACHE_OP_FAST; + + and calling: + + void fscache_enqueue_operation(struct fscache_operation *op) + + This can be used to allow other things to have use of the worker thread + pools. + + +===================== +ASYNCHRONOUS CALLBACK +===================== + +When used in asynchronous mode, the worker thread pool will invoke the +processor method with a pointer to the operation. This should then get at the +container struct by using container_of(): + + static void fscache_write_op(struct fscache_operation *_op) + { + struct fscache_storage *op = + container_of(_op, struct fscache_storage, op); + ... + } + +The caller holds a reference on the operation, and will invoke +fscache_put_operation() when the processor function returns. The processor +function is at liberty to call fscache_enqueue_operation() or to take extra +references. diff --git a/Documentation/filesystems/exofs.txt b/Documentation/filesystems/exofs.txt new file mode 100644 index 000000000000..0ced74c2f73c --- /dev/null +++ b/Documentation/filesystems/exofs.txt @@ -0,0 +1,176 @@ +=============================================================================== +WHAT IS EXOFS? +=============================================================================== + +exofs is a file system that uses an OSD and exports the API of a normal Linux +file system. Users access exofs like any other local file system, and exofs +will in turn issue commands to the local OSD initiator. + +OSD is a new T10 command set that views storage devices not as a large/flat +array of sectors but as a container of objects, each having a length, quota, +time attributes and more. Each object is addressed by a 64bit ID, and is +contained in a 64bit ID partition. Each object has associated attributes +attached to it, which are integral part of the object and provide metadata about +the object. The standard defines some common obligatory attributes, but user +attributes can be added as needed. + +=============================================================================== +ENVIRONMENT +=============================================================================== + +To use this file system, you need to have an object store to run it on. You +may download a target from: +http://open-osd.org + +See Documentation/scsi/osd.txt for how to setup a working osd environment. + +=============================================================================== +USAGE +=============================================================================== + +1. Download and compile exofs and open-osd initiator: + You need an external Kernel source tree or kernel headers from your + distribution. (anything based on 2.6.26 or later). + + a. download open-osd including exofs source using: + [parent-directory]$ git clone git://git.open-osd.org/open-osd.git + + b. Build the library module like this: + [parent-directory]$ make -C KSRC=$(KER_DIR) open-osd + + This will build both the open-osd initiator as well as the exofs kernel + module. Use whatever parameters you compiled your Kernel with and + $(KER_DIR) above pointing to the Kernel you compile against. See the file + open-osd/top-level-Makefile for an example. + +2. Get the OSD initiator and target set up properly, and login to the target. + See Documentation/scsi/osd.txt for farther instructions. Also see ./do-osd + for example script that does all these steps. + +3. Insmod the exofs.ko module: + [exofs]$ insmod exofs.ko + +4. Make sure the directory where you want to mount exists. If not, create it. + (For example, mkdir /mnt/exofs) + +5. At first run you will need to invoke the mkfs.exofs application + + As an example, this will create the file system on: + /dev/osd0 partition ID 65536 + + mkfs.exofs --pid=65536 --format /dev/osd0 + + The --format is optional if not specified no OSD_FORMAT will be + preformed and a clean file system will be created in the specified pid, + in the available space of the target. (Use --format=size_in_meg to limit + the total LUN space available) + + If pid already exist it will be deleted and a new one will be created in it's + place. Be careful. + + An exofs lives inside a single OSD partition. You can create multiple exofs + filesystems on the same device using multiple pids. + + (run mkfs.exofs without any parameters for usage help message) + +6. Mount the file system. + + For example, to mount /dev/osd0, partition ID 0x10000 on /mnt/exofs: + + mount -t exofs -o pid=65536 /dev/osd0 /mnt/exofs/ + +7. For reference (See do-exofs example script): + do-exofs start - an example of how to perform the above steps. + do-exofs stop - an example of how to unmount the file system. + do-exofs format - an example of how to format and mkfs a new exofs. + +8. Extra compilation flags (uncomment in fs/exofs/Kbuild): + CONFIG_EXOFS_DEBUG - for debug messages and extra checks. + +=============================================================================== +exofs mount options +=============================================================================== +Similar to any mount command: + mount -t exofs -o exofs_options /dev/osdX mount_exofs_directory + +Where: + -t exofs: specifies the exofs file system + + /dev/osdX: X is a decimal number. /dev/osdX was created after a successful + login into an OSD target. + + mount_exofs_directory: The directory to mount the file system on + + exofs specific options: Options are separated by commas (,) + pid=<integer> - The partition number to mount/create as + container of the filesystem. + This option is mandatory + to=<integer> - Timeout in ticks for a single command + default is (60 * HZ) [for debugging only] + +=============================================================================== +DESIGN +=============================================================================== + +* The file system control block (AKA on-disk superblock) resides in an object + with a special ID (defined in common.h). + Information included in the file system control block is used to fill the + in-memory superblock structure at mount time. This object is created before + the file system is used by mkexofs.c It contains information such as: + - The file system's magic number + - The next inode number to be allocated + +* Each file resides in its own object and contains the data (and it will be + possible to extend the file over multiple objects, though this has not been + implemented yet). + +* A directory is treated as a file, and essentially contains a list of <file + name, inode #> pairs for files that are found in that directory. The object + IDs correspond to the files' inode numbers and will be allocated according to + a bitmap (stored in a separate object). Now they are allocated using a + counter. + +* Each file's control block (AKA on-disk inode) is stored in its object's + attributes. This applies to both regular files and other types (directories, + device files, symlinks, etc.). + +* Credentials are generated per object (inode and superblock) when they is + created in memory (read off disk or created). The credential works for all + operations and is used as long as the object remains in memory. + +* Async OSD operations are used whenever possible, but the target may execute + them out of order. The operations that concern us are create, delete, + readpage, writepage, update_inode, and truncate. The following pairs of + operations should execute in the order written, and we need to prevent them + from executing in reverse order: + - The following are handled with the OBJ_CREATED and OBJ_2BCREATED + flags. OBJ_CREATED is set when we know the object exists on the OSD - + in create's callback function, and when we successfully do a read_inode. + OBJ_2BCREATED is set in the beginning of the create function, so we + know that we should wait. + - create/delete: delete should wait until the object is created + on the OSD. + - create/readpage: readpage should be able to return a page + full of zeroes in this case. If there was a write already + en-route (i.e. create, writepage, readpage) then the page + would be locked, and so it would really be the same as + create/writepage. + - create/writepage: if writepage is called for a sync write, it + should wait until the object is created on the OSD. + Otherwise, it should just return. + - create/truncate: truncate should wait until the object is + created on the OSD. + - create/update_inode: update_inode should wait until the + object is created on the OSD. + - Handled by VFS locks: + - readpage/delete: shouldn't happen because of page lock. + - writepage/delete: shouldn't happen because of page lock. + - readpage/writepage: shouldn't happen because of page lock. + +=============================================================================== +LICENSE/COPYRIGHT +=============================================================================== +The exofs file system is based on ext2 v0.5b (distributed with the Linux kernel +version 2.6.10). All files include the original copyrights, and the license +is GPL version 2 (only version 2, as is true for the Linux kernel). The +Linux kernel can be downloaded from www.kernel.org. diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index e5f3833a6ef8..570f9bd9be2b 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -14,6 +14,11 @@ Options When mounting an ext3 filesystem, the following option are accepted: (*) == default +ro Mount filesystem read only. Note that ext3 will replay + the journal (and thus write to the partition) even when + mounted "read only". Mount options "ro,noload" can be + used to prevent writes to the filesystem. + journal=update Update the ext3 file system's journal to the current format. @@ -27,7 +32,9 @@ journal_dev=devnum When the external journal device's major/minor numbers identified through its new major/minor numbers encoded in devnum. -noload Don't load the journal on mounting. +noload Don't load the journal on mounting. Note that this forces + mount of inconsistent filesystem, which can lead to + various problems. data=journal All data are committed into the journal prior to being written into the main file system. @@ -92,9 +99,12 @@ nocheck debug Extra debugging information is sent to syslog. -errors=remount-ro(*) Remount the filesystem read-only on an error. +errors=remount-ro Remount the filesystem read-only on an error. errors=continue Keep going on a filesystem error. errors=panic Panic and halt the machine if an error occurs. + (These mount options override the errors behavior + specified in the superblock, which can be + configured using tune2fs.) data_err=ignore(*) Just print an error message if an error occurs in a file data buffer in ordered mode. diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt new file mode 100644 index 000000000000..6d6db60d567d --- /dev/null +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -0,0 +1,70 @@ +POHMELFS: Parallel Optimized Host Message Exchange Layered File System. + + Evgeniy Polyakov <zbr@ioremap.net> + +Homepage: http://www.ioremap.net/projects/pohmelfs + +POHMELFS first began as a network filesystem with coherent local data and +metadata caches but is now evolving into a parallel distributed filesystem. + +Main features of this FS include: + * Locally coherent cache for data and metadata with (potentially) byte-range locks. + Since all Linux filesystems lock the whole inode during writing, algorithm + is very simple and does not use byte-ranges, although they are sent in + locking messages. + * Completely async processing of all events except creation of hard and symbolic + links, and rename events. + Object creation and data reading and writing are processed asynchronously. + * Flexible object architecture optimized for network processing. + Ability to create long paths to objects and remove arbitrarily huge + directories with a single network command. + (like removing the whole kernel tree via a single network command). + * Very high performance. + * Fast and scalable multithreaded userspace server. Being in userspace it works + with any underlying filesystem and still is much faster than async in-kernel NFS one. + * Client is able to switch between different servers (if one goes down, client + automatically reconnects to second and so on). + * Transactions support. Full failover for all operations. + Resending transactions to different servers on timeout or error. + * Read request (data read, directory listing, lookup requests) balancing between multiple servers. + * Write requests are replicated to multiple servers and completed only when all of them are acked. + * Ability to add and/or remove servers from the working set at run-time. + * Strong authentification and possible data encryption in network channel. + * Extended attributes support. + +POHMELFS is based on transactions, which are potentially long-standing objects that live +in the client's memory. Each transaction contains all the information needed to process a given +command (or set of commands, which is frequently used during data writing: single transactions +can contain creation and data writing commands). Transactions are committed by all the servers +to which they are sent and, in case of failures, are eventually resent or dropped with an error. +For example, reading will return an error if no servers are available. + +POHMELFS uses a asynchronous approach to data processing. Courtesy of transactions, it is +possible to detach replies from requests and, if the command requires data to be received, the +caller sleeps waiting for it. Thus, it is possible to issue multiple read commands to different +servers and async threads will pick up replies in parallel, find appropriate transactions in the +system and put the data where it belongs (like the page or inode cache). + +The main feature of POHMELFS is writeback data and the metadata cache. +Only a few non-performance critical operations use the write-through cache and +are synchronous: hard and symbolic link creation, and object rename. Creation, +removal of objects and data writing are asynchronous and are sent to +the server during system writeback. Only one writer at a time is allowed for any +given inode, which is guarded by an appropriate locking protocol. +Because of this feature, POHMELFS is extremely fast at metadata intensive +workloads and can fully utilize the bandwidth to the servers when doing bulk +data transfers. + +POHMELFS clients operate with a working set of servers and are capable of balancing read-only +operations (like lookups or directory listings) between them. +Administrators can add or remove servers from the set at run-time via special commands (described +in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers. + +POHMELFS is capable of full data channel encryption and/or strong crypto hashing. +One can select any kernel supported cipher, encryption mode, hash type and operation mode +(hmac or digest). It is also possible to use both or neither (default). Crypto configuration +is checked during mount time and, if the server does not support it, appropriate capabilities +will be disabled or mount will fail (if 'crypto_fail_unsupported' mount option is specified). +Crypto performance heavily depends on the number of crypto threads, which asynchronously perform +crypto operations and send the resulting data to server or submit it up the stack. This number +can be controlled via a mount option. diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt new file mode 100644 index 000000000000..4e3d50157083 --- /dev/null +++ b/Documentation/filesystems/pohmelfs/info.txt @@ -0,0 +1,86 @@ +POHMELFS usage information. + +Mount options: +idx=%u + Each mountpoint is associated with a special index via this option. + Administrator can add or remove servers from the given index, so all mounts, + which were attached to it, are updated. + Default it is 0. + +trans_scan_timeout=%u + This timeout, expressed in milliseconds, specifies time to scan transaction + trees looking for stale requests, which have to be resent, or if number of + retries exceed specified limit, dropped with error. + Default is 5 seconds. + +drop_scan_timeout=%u + Internal timeout, expressed in milliseconds, which specifies how frequently + inodes marked to be dropped are freed. It also specifies how frequently + the system checks that servers have to be added or removed from current working set. + Default is 1 second. + +wait_on_page_timeout=%u + Number of milliseconds to wait for reply from remote server for data reading command. + If this timeout is exceeded, reading returns an error. + Default is 5 seconds. + +trans_retries=%u + This is the number of times that a transaction will be resent to a server that did + not answer for the last @trans_scan_timeout milliseconds. + When the number of resends exceeds this limit, the transaction is completed with error. + Default is 5 resends. + +crypto_thread_num=%u + Number of crypto processing threads. Threads are used both for RX and TX traffic. + Default is 2, or no threads if crypto operations are not supported. + +trans_max_pages=%u + Maximum number of pages in a single transaction. This parameter also controls + the number of pages, allocated for crypto processing (each crypto thread has + pool of pages, the number of which is equal to 'trans_max_pages'. + Default is 100 pages. + +crypto_fail_unsupported + If specified, mount will fail if the server does not support requested crypto operations. + By default mount will disable non-matching crypto operations. + +mcache_timeout=%u + Maximum number of milliseconds to wait for the mcache objects to be processed. + Mcache includes locks (given lock should be granted by server), attributes (they should be + fully received in the given timeframe). + Default is 5 seconds. + +Usage examples. + +Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx +with appropriate hash algorithm and key file and cipher algorithm, mode and key file: +$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key + +Mount filesystem with given index $idx to /mnt mountpoint. +Client will connect to all servers specified in the working set via previous command: +mount -t pohmel -o idx=$idx q /mnt + +One can add or remove servers from working set after mounting too. + + +Server installation. + +Creating a server, which listens at port 1025 and 0.0.0.0 address. +Working root directory (note, that server chroots there, so you have to have appropriate permissions) +is set to /mnt, server will negotiate hash/cipher with client, in case client requested it, there +are appropriate key files. +Number of working threads is set to 10. + +# ./fserver -a 0.0.0.0 -p 1025 -r /mnt -w 10 -K hash_key -k cipher_key + + -A 6 - listen on ipv6 address. Default: Disabled. + -r root - path to root directory. Default: /tmp. + -a addr - listen address. Default: 0.0.0.0. + -p port - listen port. Default: 1025. + -w workers - number of workers per connected client. Default: 1. + -K file - hash key size. Default: none. + -k file - cipher key size. Default: none. + -h - this help. + +Number of worker threads specifies how many workers will be created for each client. +Bulk single-client transafers usually are better handled with smaller number (like 1-3). diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt new file mode 100644 index 000000000000..40ea6c295afb --- /dev/null +++ b/Documentation/filesystems/pohmelfs/network_protocol.txt @@ -0,0 +1,227 @@ +POHMELFS network protocol. + +Basic structure used in network communication is following command: + +struct netfs_cmd +{ + __u16 cmd; /* Command number */ + __u16 csize; /* Attached crypto information size */ + __u16 cpad; /* Attached padding size */ + __u16 ext; /* External flags */ + __u32 size; /* Size of the attached data */ + __u32 trans; /* Transaction id */ + __u64 id; /* Object ID to operate on. Used for feedback.*/ + __u64 start; /* Start of the object. */ + __u64 iv; /* IV sequence */ + __u8 data[0]; +}; + +Commands can be embedded into transaction command (which in turn has own command), +so one can extend protocol as needed without breaking backward compatibility as long +as old commands are supported. All string lengths include tail 0 byte. + +All commans are transfered over the network in big-endian. CPU endianess is used at the end peers. + +@cmd - command number, which specifies command to be processed. Following + commands are used currently: + + NETFS_READDIR = 1, /* Read directory for given inode number */ + NETFS_READ_PAGE, /* Read data page from the server */ + NETFS_WRITE_PAGE, /* Write data page to the server */ + NETFS_CREATE, /* Create directory entry */ + NETFS_REMOVE, /* Remove directory entry */ + NETFS_LOOKUP, /* Lookup single object */ + NETFS_LINK, /* Create a link */ + NETFS_TRANS, /* Transaction */ + NETFS_OPEN, /* Open intent */ + NETFS_INODE_INFO, /* Metadata cache coherency synchronization message */ + NETFS_PAGE_CACHE, /* Page cache invalidation message */ + NETFS_READ_PAGES, /* Read multiple contiguous pages in one go */ + NETFS_RENAME, /* Rename object */ + NETFS_CAPABILITIES, /* Capabilities of the client, for example supported crypto */ + NETFS_LOCK, /* Distributed lock message */ + NETFS_XATTR_SET, /* Set extended attribute */ + NETFS_XATTR_GET, /* Get extended attribute */ + +@ext - external flags. Used by different commands to specify some extra arguments + like partial size of the embedded objects or creation flags. + +@size - size of the attached data. For NETFS_READ_PAGE and NETFS_READ_PAGES no data is attached, + but size of the requested data is incorporated here. It does not include size of the command + header (struct netfs_cmd) itself. + +@id - id of the object this command operates on. Each command can use it for own purpose. + +@start - start of the object this command operates on. Each command can use it for own purpose. + +@csize, @cpad - size and padding size of the (attached if needed) crypto information. + +Command specifications. + +@NETFS_READDIR +This command is used to sync content of the remote dir to the client. + +@ext - length of the path to object. +@size - the same. +@id - local inode number of the directory to read. +@start - zero. + + +@NETFS_READ_PAGE +This command is used to read data from remote server. +Data size does not exceed local page cache size. + +@id - inode number. +@start - first byte offset. +@size - number of bytes to read plus length of the path to object. +@ext - object path length. + + +@NETFS_CREATE +Used to create object. +It does not require that all directories on top of the object were +already created, it will create them automatically. Each object has +associated @netfs_path_entry data structure, which contains creation +mode (permissions and type) and length of the name as long as name itself. + +@start - 0 +@size - size of the all data structures needed to create a path +@id - local inode number +@ext - 0 + + +@NETFS_REMOVE +Used to remove object. + +@ext - length of the path to object. +@size - the same. +@id - local inode number. +@start - zero. + + +@NETFS_LOOKUP +Lookup information about object on server. + +@ext - length of the path to object. +@size - the same. +@id - local inode number of the directory to look object in. +@start - local inode number of the object to look at. + + +@NETFS_LINK +Create hard of symlink. +Command is sent as "object_path|target_path". + +@size - size of the above string. +@id - parent local inode number. +@start - 1 for symlink, 0 for hardlink. +@ext - size of the "object_path" above. + + +@NETFS_TRANS +Transaction header. + +@size - incorporates all embedded command sizes including theirs header sizes. +@start - transaction generation number - unique id used to find transaction. +@ext - transaction flags. Unused at the moment. +@id - 0. + + +@NETFS_OPEN +Open intent for given transaction. + +@id - local inode number. +@start - 0. +@size - path length to the object. +@ext - open flags (O_RDWR and so on). + + +@NETFS_INODE_INFO +Metadata update command. +It is sent to servers when attributes of the object are changed and received +when data or metadata were updated. It operates with the following structure: + +struct netfs_inode_info +{ + unsigned int mode; + unsigned int nlink; + unsigned int uid; + unsigned int gid; + unsigned int blocksize; + unsigned int padding; + __u64 ino; + __u64 blocks; + __u64 rdev; + __u64 size; + __u64 version; +}; + +It effectively mirrors stat(2) returned data. + + +@ext - path length to the object. +@size - the same plus size of the netfs_inode_info structure. +@id - local inode number. +@start - 0. + + +@NETFS_PAGE_CACHE +Command is only received by clients. It contains information about +page to be marked as not up-to-date. + +@id - client's inode number. +@start - last byte of the page to be invalidated. If it is not equal to + current inode size, it will be vmtruncated(). +@size - 0 +@ext - 0 + + +@NETFS_READ_PAGES +Used to read multiple contiguous pages in one go. + +@start - first byte of the contiguous region to read. +@size - contains of two fields: lower 8 bits are used to represent page cache shift + used by client, another 3 bytes are used to get number of pages. +@id - local inode number. +@ext - path length to the object. + + +@NETFS_RENAME +Used to rename object. +Attached data is formed into following string: "old_path|new_path". + +@id - local inode number. +@start - parent inode number. +@size - length of the above string. +@ext - length of the old path part. + + +@NETFS_CAPABILITIES +Used to exchange crypto capabilities with server. +If crypto capabilities are not supported by server, then client will disable it +or fail (if 'crypto_fail_unsupported' mount options was specified). + +@id - superblock index. Used to specify crypto information for group of servers. +@size - size of the attached capabilities structure. +@start - 0. +@size - 0. +@scsize - 0. + +@NETFS_LOCK +Used to send lock request/release messages. Although it sends byte range request +and is capable of flushing pages based on that, it is not used, since all Linux +filesystems lock the whole inode. + +@id - lock generation number. +@start - start of the locked range. +@size - size of the locked range. +@ext - lock type: read/write. Not used actually. 15'th bit is used to determine, + if it is lock request (1) or release (0). + +@NETFS_XATTR_SET +@NETFS_XATTR_GET +Used to set/get extended attributes for given inode. +@id - attribute generation number or xattr setting type +@start - size of the attribute (request or attached) +@size - name length, path len and data size for given attribute +@ext - path length for given object diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index efc4fd9f40ce..ce84cfc9eae0 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -5,6 +5,7 @@ Bodo Bauer <bb@ricochet.net> 2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000 +move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009 ------------------------------------------------------------------------------ Version 1.3 Kernel version 2.2.12 Kernel version 2.4.0-test11-pre4 @@ -26,25 +27,17 @@ Table of Contents 1.6 Parallel port info in /proc/parport 1.7 TTY info in /proc/tty 1.8 Miscellaneous kernel statistics in /proc/stat + 1.9 Ext4 file system parameters 2 Modifying System Parameters - 2.1 /proc/sys/fs - File system data - 2.2 /proc/sys/fs/binfmt_misc - Miscellaneous binary formats - 2.3 /proc/sys/kernel - general kernel parameters - 2.4 /proc/sys/vm - The virtual memory subsystem - 2.5 /proc/sys/dev - Device specific parameters - 2.6 /proc/sys/sunrpc - Remote procedure calls - 2.7 /proc/sys/net - Networking stuff - 2.8 /proc/sys/net/ipv4 - IPV4 settings - 2.9 Appletalk - 2.10 IPX - 2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem - 2.12 /proc/<pid>/oom_adj - Adjust the oom-killer score - 2.13 /proc/<pid>/oom_score - Display current oom-killer score - 2.14 /proc/<pid>/io - Display the IO accounting fields - 2.15 /proc/<pid>/coredump_filter - Core dump filtering settings - 2.16 /proc/<pid>/mountinfo - Information about mounts - 2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface + + 3 Per-Process Parameters + 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score + 3.2 /proc/<pid>/oom_score - Display current oom-killer score + 3.3 /proc/<pid>/io - Display the IO accounting fields + 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings + 3.5 /proc/<pid>/mountinfo - Information about mounts + ------------------------------------------------------------------------------ Preface @@ -990,1021 +983,24 @@ review the kernel documentation in the directory /usr/src/linux/Documentation. This chapter is heavily based on the documentation included in the pre 2.2 kernels, and became part of it in version 2.2.1 of the Linux kernel. -2.1 /proc/sys/fs - File system data ------------------------------------ - -This subdirectory contains specific file system, file handle, inode, dentry -and quota information. - -Currently, these files are in /proc/sys/fs: - -dentry-state ------------- - -Status of the directory cache. Since directory entries are dynamically -allocated and deallocated, this file indicates the current status. It holds -six values, in which the last two are not used and are always zero. The others -are listed in table 2-1. - - -Table 2-1: Status files of the directory cache -.............................................................................. - File Content - nr_dentry Almost always zero - nr_unused Number of unused cache entries - age_limit - in seconds after the entry may be reclaimed, when memory is short - want_pages internally -.............................................................................. - -dquot-nr and dquot-max ----------------------- - -The file dquot-max shows the maximum number of cached disk quota entries. - -The file dquot-nr shows the number of allocated disk quota entries and the -number of free disk quota entries. - -If the number of available cached disk quotas is very low and you have a large -number of simultaneous system users, you might want to raise the limit. - -file-nr and file-max --------------------- - -The kernel allocates file handles dynamically, but doesn't free them again at -this time. - -The value in file-max denotes the maximum number of file handles that the -Linux kernel will allocate. When you get a lot of error messages about running -out of file handles, you might want to raise this limit. The default value is -10% of RAM in kilobytes. To change it, just write the new number into the -file: - - # cat /proc/sys/fs/file-max - 4096 - # echo 8192 > /proc/sys/fs/file-max - # cat /proc/sys/fs/file-max - 8192 - - -This method of revision is useful for all customizable parameters of the -kernel - simply echo the new value to the corresponding file. - -Historically, the three values in file-nr denoted the number of allocated file -handles, the number of allocated but unused file handles, and the maximum -number of file handles. Linux 2.6 always reports 0 as the number of free file -handles -- this is not an error, it just means that the number of allocated -file handles exactly matches the number of used file handles. - -Attempts to allocate more file descriptors than file-max are reported with -printk, look for "VFS: file-max limit <number> reached". - -inode-state and inode-nr ------------------------- - -The file inode-nr contains the first two items from inode-state, so we'll skip -to that file... - -inode-state contains two actual numbers and five dummy values. The numbers -are nr_inodes and nr_free_inodes (in order of appearance). - -nr_inodes -~~~~~~~~~ - -Denotes the number of inodes the system has allocated. This number will -grow and shrink dynamically. - -nr_open -------- - -Denotes the maximum number of file-handles a process can -allocate. Default value is 1024*1024 (1048576) which should be -enough for most machines. Actual limit depends on RLIMIT_NOFILE -resource limit. - -nr_free_inodes --------------- - -Represents the number of free inodes. Ie. The number of inuse inodes is -(nr_inodes - nr_free_inodes). - -aio-nr and aio-max-nr ---------------------- - -aio-nr is the running total of the number of events specified on the -io_setup system call for all currently active aio contexts. If aio-nr -reaches aio-max-nr then io_setup will fail with EAGAIN. Note that -raising aio-max-nr does not result in the pre-allocation or re-sizing -of any kernel data structures. - -2.2 /proc/sys/fs/binfmt_misc - Miscellaneous binary formats ------------------------------------------------------------ - -Besides these files, there is the subdirectory /proc/sys/fs/binfmt_misc. This -handles the kernel support for miscellaneous binary formats. - -Binfmt_misc provides the ability to register additional binary formats to the -Kernel without compiling an additional module/kernel. Therefore, binfmt_misc -needs to know magic numbers at the beginning or the filename extension of the -binary. - -It works by maintaining a linked list of structs that contain a description of -a binary format, including a magic with size (or the filename extension), -offset and mask, and the interpreter name. On request it invokes the given -interpreter with the original program as argument, as binfmt_java and -binfmt_em86 and binfmt_mz do. Since binfmt_misc does not define any default -binary-formats, you have to register an additional binary-format. - -There are two general files in binfmt_misc and one file per registered format. -The two general files are register and status. - -Registering a new binary format -------------------------------- - -To register a new binary format you have to issue the command - - echo :name:type:offset:magic:mask:interpreter: > /proc/sys/fs/binfmt_misc/register - - - -with appropriate name (the name for the /proc-dir entry), offset (defaults to -0, if omitted), magic, mask (which can be omitted, defaults to all 0xff) and -last but not least, the interpreter that is to be invoked (for example and -testing /bin/echo). Type can be M for usual magic matching or E for filename -extension matching (give extension in place of magic). - -Check or reset the status of the binary format handler ------------------------------------------------------- - -If you do a cat on the file /proc/sys/fs/binfmt_misc/status, you will get the -current status (enabled/disabled) of binfmt_misc. Change the status by echoing -0 (disables) or 1 (enables) or -1 (caution: this clears all previously -registered binary formats) to status. For example echo 0 > status to disable -binfmt_misc (temporarily). - -Status of a single handler --------------------------- - -Each registered handler has an entry in /proc/sys/fs/binfmt_misc. These files -perform the same function as status, but their scope is limited to the actual -binary format. By cating this file, you also receive all related information -about the interpreter/magic of the binfmt. - -Example usage of binfmt_misc (emulate binfmt_java) --------------------------------------------------- - - cd /proc/sys/fs/binfmt_misc - echo ':Java:M::\xca\xfe\xba\xbe::/usr/local/java/bin/javawrapper:' > register - echo ':HTML:E::html::/usr/local/java/bin/appletviewer:' > register - echo ':Applet:M::<!--applet::/usr/local/java/bin/appletviewer:' > register - echo ':DEXE:M::\x0eDEX::/usr/bin/dosexec:' > register - - -These four lines add support for Java executables and Java applets (like -binfmt_java, additionally recognizing the .html extension with no need to put -<!--applet> to every applet file). You have to install the JDK and the -shell-script /usr/local/java/bin/javawrapper too. It works around the -brokenness of the Java filename handling. To add a Java binary, just create a -link to the class-file somewhere in the path. - -2.3 /proc/sys/kernel - general kernel parameters ------------------------------------------------- - -This directory reflects general kernel behaviors. As I've said before, the -contents depend on your configuration. Here you'll find the most important -files, along with descriptions of what they mean and how to use them. - -acct ----- - -The file contains three values; highwater, lowwater, and frequency. - -It exists only when BSD-style process accounting is enabled. These values -control its behavior. If the free space on the file system where the log lives -goes below lowwater percentage, accounting suspends. If it goes above -highwater percentage, accounting resumes. Frequency determines how often you -check the amount of free space (value is in seconds). Default settings are: 4, -2, and 30. That is, suspend accounting if there is less than 2 percent free; -resume it if we have a value of 3 or more percent; consider information about -the amount of free space valid for 30 seconds - -ctrl-alt-del ------------- - -When the value in this file is 0, ctrl-alt-del is trapped and sent to the init -program to handle a graceful restart. However, when the value is greater that -zero, Linux's reaction to this key combination will be an immediate reboot, -without syncing its dirty buffers. - -[NOTE] - When a program (like dosemu) has the keyboard in raw mode, the - ctrl-alt-del is intercepted by the program before it ever reaches the - kernel tty layer, and it is up to the program to decide what to do with - it. - -domainname and hostname ------------------------ - -These files can be controlled to set the NIS domainname and hostname of your -box. For the classic darkstar.frop.org a simple: - - # echo "darkstar" > /proc/sys/kernel/hostname - # echo "frop.org" > /proc/sys/kernel/domainname - - -would suffice to set your hostname and NIS domainname. - -osrelease, ostype and version ------------------------------ - -The names make it pretty obvious what these fields contain: - - > cat /proc/sys/kernel/osrelease - 2.2.12 - - > cat /proc/sys/kernel/ostype - Linux - - > cat /proc/sys/kernel/version - #4 Fri Oct 1 12:41:14 PDT 1999 - - -The files osrelease and ostype should be clear enough. Version needs a little -more clarification. The #4 means that this is the 4th kernel built from this -source base and the date after it indicates the time the kernel was built. The -only way to tune these values is to rebuild the kernel. - -panic ------ - -The value in this file represents the number of seconds the kernel waits -before rebooting on a panic. When you use the software watchdog, the -recommended setting is 60. If set to 0, the auto reboot after a kernel panic -is disabled, which is the default setting. - -printk ------- - -The four values in printk denote -* console_loglevel, -* default_message_loglevel, -* minimum_console_loglevel and -* default_console_loglevel -respectively. - -These values influence printk() behavior when printing or logging error -messages, which come from inside the kernel. See syslog(2) for more -information on the different log levels. - -console_loglevel ----------------- - -Messages with a higher priority than this will be printed to the console. - -default_message_level ---------------------- - -Messages without an explicit priority will be printed with this priority. - -minimum_console_loglevel ------------------------- - -Minimum (highest) value to which the console_loglevel can be set. - -default_console_loglevel ------------------------- - -Default value for console_loglevel. - -sg-big-buff ------------ - -This file shows the size of the generic SCSI (sg) buffer. At this point, you -can't tune it yet, but you can change it at compile time by editing -include/scsi/sg.h and changing the value of SG_BIG_BUFF. - -If you use a scanner with SANE (Scanner Access Now Easy) you might want to set -this to a higher value. Refer to the SANE documentation on this issue. - -modprobe --------- - -The location where the modprobe binary is located. The kernel uses this -program to load modules on demand. - -unknown_nmi_panic ------------------ - -The value in this file affects behavior of handling NMI. When the value is -non-zero, unknown NMI is trapped and then panic occurs. At that time, kernel -debugging information is displayed on console. - -NMI switch that most IA32 servers have fires unknown NMI up, for example. -If a system hangs up, try pressing the NMI switch. - -panic_on_unrecovered_nmi ------------------------- - -The default Linux behaviour on an NMI of either memory or unknown is to continue -operation. For many environments such as scientific computing it is preferable -that the box is taken out and the error dealt with than an uncorrected -parity/ECC error get propogated. - -A small number of systems do generate NMI's for bizarre random reasons such as -power management so the default is off. That sysctl works like the existing -panic controls already in that directory. - -nmi_watchdog ------------- - -Enables/Disables the NMI watchdog on x86 systems. When the value is non-zero -the NMI watchdog is enabled and will continuously test all online cpus to -determine whether or not they are still functioning properly. Currently, -passing "nmi_watchdog=" parameter at boot time is required for this function -to work. - -If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the -NMI watchdog shares registers with oprofile. By disabling the NMI watchdog, -oprofile may have more registers to utilize. - -msgmni ------- - -Maximum number of message queue ids on the system. -This value scales to the amount of lowmem. It is automatically recomputed -upon memory add/remove or ipc namespace creation/removal. -When a value is written into this file, msgmni's value becomes fixed, i.e. it -is not recomputed anymore when one of the above events occurs. -Use auto_msgmni to change this behavior. - -auto_msgmni ------------ - -Enables/Disables automatic recomputing of msgmni upon memory add/remove or -upon ipc namespace creation/removal (see the msgmni description above). -Echoing "1" into this file enables msgmni automatic recomputing. -Echoing "0" turns it off. -auto_msgmni default value is 1. - - -2.4 /proc/sys/vm - The virtual memory subsystem ------------------------------------------------ - -Please see: Documentation/sysctls/vm.txt for a description of these +Please see: Documentation/sysctls/ directory for descriptions of these entries. +------------------------------------------------------------------------------ +Summary +------------------------------------------------------------------------------ +Certain aspects of kernel behavior can be modified at runtime, without the +need to recompile the kernel, or even to reboot the system. The files in the +/proc/sys tree can not only be read, but also modified. You can use the echo +command to write value into these files, thereby changing the default settings +of the kernel. +------------------------------------------------------------------------------ -2.5 /proc/sys/dev - Device specific parameters ----------------------------------------------- - -Currently there is only support for CDROM drives, and for those, there is only -one read-only file containing information about the CD-ROM drives attached to -the system: - - >cat /proc/sys/dev/cdrom/info - CD-ROM information, Id: cdrom.c 2.55 1999/04/25 - - drive name: sr0 hdb - drive speed: 32 40 - drive # of slots: 1 0 - Can close tray: 1 1 - Can open tray: 1 1 - Can lock tray: 1 1 - Can change speed: 1 1 - Can select disk: 0 1 - Can read multisession: 1 1 - Can read MCN: 1 1 - Reports media changed: 1 1 - Can play audio: 1 1 - - -You see two drives, sr0 and hdb, along with a list of their features. - -2.6 /proc/sys/sunrpc - Remote procedure calls ---------------------------------------------- - -This directory contains four files, which enable or disable debugging for the -RPC functions NFS, NFS-daemon, RPC and NLM. The default values are 0. They can -be set to one to turn debugging on. (The default value is 0 for each) - -2.7 /proc/sys/net - Networking stuff ------------------------------------- - -The interface to the networking parts of the kernel is located in -/proc/sys/net. Table 2-3 shows all possible subdirectories. You may see only -some of them, depending on your kernel's configuration. - - -Table 2-3: Subdirectories in /proc/sys/net -.............................................................................. - Directory Content Directory Content - core General parameter appletalk Appletalk protocol - unix Unix domain sockets netrom NET/ROM - 802 E802 protocol ax25 AX25 - ethernet Ethernet protocol rose X.25 PLP layer - ipv4 IP version 4 x25 X.25 protocol - ipx IPX token-ring IBM token ring - bridge Bridging decnet DEC net - ipv6 IP version 6 -.............................................................................. - -We will concentrate on IP networking here. Since AX15, X.25, and DEC Net are -only minor players in the Linux world, we'll skip them in this chapter. You'll -find some short info on Appletalk and IPX further on in this chapter. Review -the online documentation and the kernel source to get a detailed view of the -parameters for those protocols. In this section we'll discuss the -subdirectories printed in bold letters in the table above. As default values -are suitable for most needs, there is no need to change these values. - -/proc/sys/net/core - Network core options ------------------------------------------ - -rmem_default ------------- - -The default setting of the socket receive buffer in bytes. - -rmem_max --------- - -The maximum receive socket buffer size in bytes. - -wmem_default ------------- - -The default setting (in bytes) of the socket send buffer. - -wmem_max --------- - -The maximum send socket buffer size in bytes. - -message_burst and message_cost ------------------------------- - -These parameters are used to limit the warning messages written to the kernel -log from the networking code. They enforce a rate limit to make a -denial-of-service attack impossible. A higher message_cost factor, results in -fewer messages that will be written. Message_burst controls when messages will -be dropped. The default settings limit warning messages to one every five -seconds. - -warnings --------- - -This controls console messages from the networking stack that can occur because -of problems on the network like duplicate address or bad checksums. Normally, -this should be enabled, but if the problem persists the messages can be -disabled. - -netdev_budget -------------- - -Maximum number of packets taken from all interfaces in one polling cycle (NAPI -poll). In one polling cycle interfaces which are registered to polling are -probed in a round-robin manner. The limit of packets in one such probe can be -set per-device via sysfs class/net/<device>/weight . - -netdev_max_backlog ------------------- - -Maximum number of packets, queued on the INPUT side, when the interface -receives packets faster than kernel can process them. - -optmem_max ----------- - -Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence -of struct cmsghdr structures with appended data. - -/proc/sys/net/unix - Parameters for Unix domain sockets -------------------------------------------------------- - -There are only two files in this subdirectory. They control the delays for -deleting and destroying socket descriptors. - -2.8 /proc/sys/net/ipv4 - IPV4 settings --------------------------------------- - -IP version 4 is still the most used protocol in Unix networking. It will be -replaced by IP version 6 in the next couple of years, but for the moment it's -the de facto standard for the internet and is used in most networking -environments around the world. Because of the importance of this protocol, -we'll have a deeper look into the subtree controlling the behavior of the IPv4 -subsystem of the Linux kernel. - -Let's start with the entries in /proc/sys/net/ipv4. - -ICMP settings -------------- - -icmp_echo_ignore_all and icmp_echo_ignore_broadcasts ----------------------------------------------------- - -Turn on (1) or off (0), if the kernel should ignore all ICMP ECHO requests, or -just those to broadcast and multicast addresses. - -Please note that if you accept ICMP echo requests with a broadcast/multi\-cast -destination address your network may be used as an exploder for denial of -service packet flooding attacks to other hosts. - -icmp_destunreach_rate, icmp_echoreply_rate, icmp_paramprob_rate and icmp_timeexeed_rate ---------------------------------------------------------------------------------------- - -Sets limits for sending ICMP packets to specific targets. A value of zero -disables all limiting. Any positive value sets the maximum package rate in -hundredth of a second (on Intel systems). - -IP settings ------------ - -ip_autoconfig -------------- - -This file contains the number one if the host received its IP configuration by -RARP, BOOTP, DHCP or a similar mechanism. Otherwise it is zero. - -ip_default_ttl --------------- - -TTL (Time To Live) for IPv4 interfaces. This is simply the maximum number of -hops a packet may travel. - -ip_dynaddr ----------- - -Enable dynamic socket address rewriting on interface address change. This is -useful for dialup interface with changing IP addresses. - -ip_forward ----------- - -Enable or disable forwarding of IP packages between interfaces. Changing this -value resets all other parameters to their default values. They differ if the -kernel is configured as host or router. - -ip_local_port_range -------------------- - -Range of ports used by TCP and UDP to choose the local port. Contains two -numbers, the first number is the lowest port, the second number the highest -local port. Default is 1024-4999. Should be changed to 32768-61000 for -high-usage systems. - -ip_no_pmtu_disc ---------------- - -Global switch to turn path MTU discovery off. It can also be set on a per -socket basis by the applications or on a per route basis. - -ip_masq_debug -------------- - -Enable/disable debugging of IP masquerading. - -IP fragmentation settings -------------------------- - -ipfrag_high_trash and ipfrag_low_trash --------------------------------------- - -Maximum memory used to reassemble IP fragments. When ipfrag_high_thresh bytes -of memory is allocated for this purpose, the fragment handler will toss -packets until ipfrag_low_thresh is reached. - -ipfrag_time ------------ - -Time in seconds to keep an IP fragment in memory. - -TCP settings ------------- - -tcp_ecn -------- - -This file controls the use of the ECN bit in the IPv4 headers. This is a new -feature about Explicit Congestion Notification, but some routers and firewalls -block traffic that has this bit set, so it could be necessary to echo 0 to -/proc/sys/net/ipv4/tcp_ecn if you want to talk to these sites. For more info -you could read RFC2481. - -tcp_retrans_collapse --------------------- - -Bug-to-bug compatibility with some broken printers. On retransmit, try to send -larger packets to work around bugs in certain TCP stacks. Can be turned off by -setting it to zero. - -tcp_keepalive_probes --------------------- - -Number of keep alive probes TCP sends out, until it decides that the -connection is broken. - -tcp_keepalive_time ------------------- - -How often TCP sends out keep alive messages, when keep alive is enabled. The -default is 2 hours. - -tcp_syn_retries ---------------- - -Number of times initial SYNs for a TCP connection attempt will be -retransmitted. Should not be higher than 255. This is only the timeout for -outgoing connections, for incoming connections the number of retransmits is -defined by tcp_retries1. - -tcp_sack --------- - -Enable select acknowledgments after RFC2018. - -tcp_timestamps --------------- - -Enable timestamps as defined in RFC1323. - -tcp_stdurg ----------- - -Enable the strict RFC793 interpretation of the TCP urgent pointer field. The -default is to use the BSD compatible interpretation of the urgent pointer -pointing to the first byte after the urgent data. The RFC793 interpretation is -to have it point to the last byte of urgent data. Enabling this option may -lead to interoperability problems. Disabled by default. - -tcp_syncookies --------------- - -Only valid when the kernel was compiled with CONFIG_SYNCOOKIES. Send out -syncookies when the syn backlog queue of a socket overflows. This is to ward -off the common 'syn flood attack'. Disabled by default. - -Note that the concept of a socket backlog is abandoned. This means the peer -may not receive reliable error messages from an over loaded server with -syncookies enabled. - -tcp_window_scaling ------------------- - -Enable window scaling as defined in RFC1323. - -tcp_fin_timeout ---------------- - -The length of time in seconds it takes to receive a final FIN before the -socket is always closed. This is strictly a violation of the TCP -specification, but required to prevent denial-of-service attacks. - -tcp_max_ka_probes ------------------ - -Indicates how many keep alive probes are sent per slow timer run. Should not -be set too high to prevent bursts. - -tcp_max_syn_backlog -------------------- - -Length of the per socket backlog queue. Since Linux 2.2 the backlog specified -in listen(2) only specifies the length of the backlog queue of already -established sockets. When more connection requests arrive Linux starts to drop -packets. When syncookies are enabled the packets are still answered and the -maximum queue is effectively ignored. - -tcp_retries1 ------------- - -Defines how often an answer to a TCP connection request is retransmitted -before giving up. - -tcp_retries2 ------------- - -Defines how often a TCP packet is retransmitted before giving up. - -Interface specific settings ---------------------------- - -In the directory /proc/sys/net/ipv4/conf you'll find one subdirectory for each -interface the system knows about and one directory calls all. Changes in the -all subdirectory affect all interfaces, whereas changes in the other -subdirectories affect only one interface. All directories have the same -entries: - -accept_redirects ----------------- - -This switch decides if the kernel accepts ICMP redirect messages or not. The -default is 'yes' if the kernel is configured for a regular host and 'no' for a -router configuration. - -accept_source_route -------------------- - -Should source routed packages be accepted or declined. The default is -dependent on the kernel configuration. It's 'yes' for routers and 'no' for -hosts. - -bootp_relay -~~~~~~~~~~~ - -Accept packets with source address 0.b.c.d with destinations not to this host -as local ones. It is supposed that a BOOTP relay daemon will catch and forward -such packets. - -The default is 0, since this feature is not implemented yet (kernel version -2.2.12). - -forwarding ----------- - -Enable or disable IP forwarding on this interface. - -log_martians ------------- - -Log packets with source addresses with no known route to kernel log. - -mc_forwarding -------------- - -Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE and a -multicast routing daemon is required. - -proxy_arp ---------- - -Does (1) or does not (0) perform proxy ARP. - -rp_filter ---------- - -Integer value determines if a source validation should be made. 1 means yes, 0 -means no. Disabled by default, but local/broadcast address spoofing is always -on. - -If you set this to 1 on a router that is the only connection for a network to -the net, it will prevent spoofing attacks against your internal networks -(external addresses can still be spoofed), without the need for additional -firewall rules. - -secure_redirects ----------------- - -Accept ICMP redirect messages only for gateways, listed in default gateway -list. Enabled by default. - -shared_media ------------- - -If it is not set the kernel does not assume that different subnets on this -device can communicate directly. Default setting is 'yes'. - -send_redirects --------------- - -Determines whether to send ICMP redirects to other hosts. - -Routing settings ----------------- - -The directory /proc/sys/net/ipv4/route contains several file to control -routing issues. - -error_burst and error_cost --------------------------- - -These parameters are used to limit how many ICMP destination unreachable to -send from the host in question. ICMP destination unreachable messages are -sent when we cannot reach the next hop while trying to transmit a packet. -It will also print some error messages to kernel logs if someone is ignoring -our ICMP redirects. The higher the error_cost factor is, the fewer -destination unreachable and error messages will be let through. Error_burst -controls when destination unreachable messages and error messages will be -dropped. The default settings limit warning messages to five every second. - -flush ------ - -Writing to this file results in a flush of the routing cache. - -gc_elasticity, gc_interval, gc_min_interval_ms, gc_timeout, gc_thresh ---------------------------------------------------------------------- - -Values to control the frequency and behavior of the garbage collection -algorithm for the routing cache. gc_min_interval is deprecated and replaced -by gc_min_interval_ms. - - -max_size --------- - -Maximum size of the routing cache. Old entries will be purged once the cache -reached has this size. - -redirect_load, redirect_number ------------------------------- - -Factors which determine if more ICPM redirects should be sent to a specific -host. No redirects will be sent once the load limit or the maximum number of -redirects has been reached. - -redirect_silence ----------------- - -Timeout for redirects. After this period redirects will be sent again, even if -this has been stopped, because the load or number limit has been reached. - -Network Neighbor handling -------------------------- - -Settings about how to handle connections with direct neighbors (nodes attached -to the same link) can be found in the directory /proc/sys/net/ipv4/neigh. - -As we saw it in the conf directory, there is a default subdirectory which -holds the default values, and one directory for each interface. The contents -of the directories are identical, with the single exception that the default -settings contain additional options to set garbage collection parameters. - -In the interface directories you'll find the following entries: - -base_reachable_time, base_reachable_time_ms -------------------------------------------- - -A base value used for computing the random reachable time value as specified -in RFC2461. - -Expression of base_reachable_time, which is deprecated, is in seconds. -Expression of base_reachable_time_ms is in milliseconds. - -retrans_time, retrans_time_ms ------------------------------ - -The time between retransmitted Neighbor Solicitation messages. -Used for address resolution and to determine if a neighbor is -unreachable. - -Expression of retrans_time, which is deprecated, is in 1/100 seconds (for -IPv4) or in jiffies (for IPv6). -Expression of retrans_time_ms is in milliseconds. - -unres_qlen ----------- - -Maximum queue length for a pending arp request - the number of packets which -are accepted from other layers while the ARP address is still resolved. - -anycast_delay -------------- - -Maximum for random delay of answers to neighbor solicitation messages in -jiffies (1/100 sec). Not yet implemented (Linux does not have anycast support -yet). - -ucast_solicit -------------- - -Maximum number of retries for unicast solicitation. - -mcast_solicit -------------- - -Maximum number of retries for multicast solicitation. - -delay_first_probe_time ----------------------- - -Delay for the first time probe if the neighbor is reachable. (see -gc_stale_time) - -locktime --------- - -An ARP/neighbor entry is only replaced with a new one if the old is at least -locktime old. This prevents ARP cache thrashing. - -proxy_delay ------------ - -Maximum time (real time is random [0..proxytime]) before answering to an ARP -request for which we have an proxy ARP entry. In some cases, this is used to -prevent network flooding. - -proxy_qlen ----------- - -Maximum queue length of the delayed proxy arp timer. (see proxy_delay). - -app_solicit ----------- - -Determines the number of requests to send to the user level ARP daemon. Use 0 -to turn off. - -gc_stale_time -------------- - -Determines how often to check for stale ARP entries. After an ARP entry is -stale it will be resolved again (which is useful when an IP address migrates -to another machine). When ucast_solicit is greater than 0 it first tries to -send an ARP packet directly to the known host When that fails and -mcast_solicit is greater than 0, an ARP request is broadcasted. - -2.9 Appletalk -------------- - -The /proc/sys/net/appletalk directory holds the Appletalk configuration data -when Appletalk is loaded. The configurable parameters are: - -aarp-expiry-time ----------------- - -The amount of time we keep an ARP entry before expiring it. Used to age out -old hosts. - -aarp-resolve-time ------------------ - -The amount of time we will spend trying to resolve an Appletalk address. - -aarp-retransmit-limit ---------------------- - -The number of times we will retransmit a query before giving up. - -aarp-tick-time --------------- - -Controls the rate at which expires are checked. - -The directory /proc/net/appletalk holds the list of active Appletalk sockets -on a machine. - -The fields indicate the DDP type, the local address (in network:node format) -the remote address, the size of the transmit pending queue, the size of the -received queue (bytes waiting for applications to read) the state and the uid -owning the socket. - -/proc/net/atalk_iface lists all the interfaces configured for appletalk.It -shows the name of the interface, its Appletalk address, the network range on -that address (or network number for phase 1 networks), and the status of the -interface. - -/proc/net/atalk_route lists each known network route. It lists the target -(network) that the route leads to, the router (may be directly connected), the -route flags, and the device the route is using. - -2.10 IPX --------- - -The IPX protocol has no tunable values in proc/sys/net. - -The IPX protocol does, however, provide proc/net/ipx. This lists each IPX -socket giving the local and remote addresses in Novell format (that is -network:node:port). In accordance with the strange Novell tradition, -everything but the port is in hex. Not_Connected is displayed for sockets that -are not tied to a specific remote address. The Tx and Rx queue sizes indicate -the number of bytes pending for transmission and reception. The state -indicates the state the socket is in and the uid is the owning uid of the -socket. - -The /proc/net/ipx_interface file lists all IPX interfaces. For each interface -it gives the network number, the node number, and indicates if the network is -the primary network. It also indicates which device it is bound to (or -Internal for internal networks) and the Frame Type if appropriate. Linux -supports 802.3, 802.2, 802.2 SNAP and DIX (Blue Book) ethernet framing for -IPX. - -The /proc/net/ipx_route table holds a list of IPX routes. For each route it -gives the destination network, the router node (or Directly) and the network -address of the router (or Connected) for internal networks. - -2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem ----------------------------------------------------------- - -The "mqueue" filesystem provides the necessary kernel features to enable the -creation of a user space library that implements the POSIX message queues -API (as noted by the MSG tag in the POSIX 1003.1-2001 version of the System -Interfaces specification.) - -The "mqueue" filesystem contains values for determining/setting the amount of -resources used by the file system. - -/proc/sys/fs/mqueue/queues_max is a read/write file for setting/getting the -maximum number of message queues allowed on the system. - -/proc/sys/fs/mqueue/msg_max is a read/write file for setting/getting the -maximum number of messages in a queue value. In fact it is the limiting value -for another (user) limit which is set in mq_open invocation. This attribute of -a queue must be less or equal then msg_max. - -/proc/sys/fs/mqueue/msgsize_max is a read/write file for setting/getting the -maximum message size value (it is every message queue's attribute set during -its creation). +------------------------------------------------------------------------------ +CHAPTER 3: PER-PROCESS PARAMETERS +------------------------------------------------------------------------------ -2.12 /proc/<pid>/oom_adj - Adjust the oom-killer score +3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score ------------------------------------------------------ This file can be used to adjust the score used to select which processes @@ -2041,25 +1037,15 @@ The task with the highest badness score is then selected and its children are killed, process itself will be killed in an OOM situation when it does not have children or some of them disabled oom like described above. -2.13 /proc/<pid>/oom_score - Display current oom-killer score +3.2 /proc/<pid>/oom_score - Display current oom-killer score ------------------------------------------------------------- ------------------------------------------------------------------------------- This file can be used to check the current score used by the oom-killer is for any given <pid>. Use it together with /proc/<pid>/oom_adj to tune which process should be killed in an out-of-memory situation. ------------------------------------------------------------------------------- -Summary ------------------------------------------------------------------------------- -Certain aspects of kernel behavior can be modified at runtime, without the -need to recompile the kernel, or even to reboot the system. The files in the -/proc/sys tree can not only be read, but also modified. You can use the echo -command to write value into these files, thereby changing the default settings -of the kernel. ------------------------------------------------------------------------------- -2.14 /proc/<pid>/io - Display the IO accounting fields +3.3 /proc/<pid>/io - Display the IO accounting fields ------------------------------------------------------- This file contains IO statistics for each running process @@ -2161,7 +1147,7 @@ those 64-bit counters, process A could see an intermediate result. More information about this can be found within the taskstats documentation in Documentation/accounting. -2.15 /proc/<pid>/coredump_filter - Core dump filtering settings +3.4 /proc/<pid>/coredump_filter - Core dump filtering settings --------------------------------------------------------------- When a process is dumped, all anonymous memory is written to a core file as long as the size of the core file isn't limited. But sometimes we don't want @@ -2205,7 +1191,7 @@ For example: $ echo 0x7 > /proc/self/coredump_filter $ ./some_program -2.16 /proc/<pid>/mountinfo - Information about mounts +3.5 /proc/<pid>/mountinfo - Information about mounts -------------------------------------------------------- This file contains lines of the form: @@ -2242,30 +1228,3 @@ For more information on mount propagation see: Documentation/filesystems/sharedsubtree.txt -2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface --------------------------------------------------------- - -This directory contains configuration options for the epoll(7) interface. - -max_user_instances ------------------- - -This is the maximum number of epoll file descriptors that a single user can -have open at a given time. The default value is 128, and should be enough -for normal users. - -max_user_watches ----------------- - -Every epoll file descriptor can store a number of files to be monitored -for event readiness. Each one of these monitored files constitutes a "watch". -This configuration option sets the maximum number of "watches" that are -allowed for each user. -Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes -on a 64bit one. -The current default value for max_user_watches is the 1/32 of the available -low memory, divided for the "watch" cost in bytes. - - ------------------------------------------------------------------------------- - diff --git a/Documentation/filesystems/udf.txt b/Documentation/filesystems/udf.txt index fde829a756e6..902b95d0ee51 100644 --- a/Documentation/filesystems/udf.txt +++ b/Documentation/filesystems/udf.txt @@ -24,6 +24,8 @@ The following mount options are supported: gid= Set the default group. umask= Set the default umask. + mode= Set the default file permissions. + dmode= Set the default directory permissions. uid= Set the default user. bs= Set the block size. unhide Show otherwise hidden files. diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 803b1318b13d..fd9a3e693813 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -15,31 +15,31 @@ Introduction Ftrace is an internal tracer designed to help out developers and designers of systems to find what is going on inside the kernel. -It can be used for debugging or analyzing latencies and performance -issues that take place outside of user-space. +It can be used for debugging or analyzing latencies and +performance issues that take place outside of user-space. Although ftrace is the function tracer, it also includes an -infrastructure that allows for other types of tracing. Some of the -tracers that are currently in ftrace include a tracer to trace -context switches, the time it takes for a high priority task to -run after it was woken up, the time interrupts are disabled, and -more (ftrace allows for tracer plugins, which means that the list of -tracers can always grow). +infrastructure that allows for other types of tracing. Some of +the tracers that are currently in ftrace include a tracer to +trace context switches, the time it takes for a high priority +task to run after it was woken up, the time interrupts are +disabled, and more (ftrace allows for tracer plugins, which +means that the list of tracers can always grow). The File System --------------- -Ftrace uses the debugfs file system to hold the control files as well -as the files to display output. +Ftrace uses the debugfs file system to hold the control files as +well as the files to display output. To mount the debugfs system: # mkdir /debug # mount -t debugfs nodev /debug -(Note: it is more common to mount at /sys/kernel/debug, but for simplicity - this document will use /debug) +( Note: it is more common to mount at /sys/kernel/debug, but for + simplicity this document will use /debug) That's it! (assuming that you have ftrace configured into your kernel) @@ -50,90 +50,124 @@ of ftrace. Here is a list of some of the key files: Note: all time values are in microseconds. - current_tracer: This is used to set or display the current tracer - that is configured. - - available_tracers: This holds the different types of tracers that - have been compiled into the kernel. The tracers - listed here can be configured by echoing their name - into current_tracer. - - tracing_enabled: This sets or displays whether the current_tracer - is activated and tracing or not. Echo 0 into this - file to disable the tracer or 1 to enable it. - - trace: This file holds the output of the trace in a human readable - format (described below). - - latency_trace: This file shows the same trace but the information - is organized more to display possible latencies - in the system (described below). - - trace_pipe: The output is the same as the "trace" file but this - file is meant to be streamed with live tracing. - Reads from this file will block until new data - is retrieved. Unlike the "trace" and "latency_trace" - files, this file is a consumer. This means reading - from this file causes sequential reads to display - more current data. Once data is read from this - file, it is consumed, and will not be read - again with a sequential read. The "trace" and - "latency_trace" files are static, and if the - tracer is not adding more data, they will display - the same information every time they are read. - - trace_options: This file lets the user control the amount of data - that is displayed in one of the above output - files. - - trace_max_latency: Some of the tracers record the max latency. - For example, the time interrupts are disabled. - This time is saved in this file. The max trace - will also be stored, and displayed by either - "trace" or "latency_trace". A new max trace will - only be recorded if the latency is greater than - the value in this file. (in microseconds) - - buffer_size_kb: This sets or displays the number of kilobytes each CPU - buffer can hold. The tracer buffers are the same size - for each CPU. The displayed number is the size of the - CPU buffer and not total size of all buffers. The - trace buffers are allocated in pages (blocks of memory - that the kernel uses for allocation, usually 4 KB in size). - If the last page allocated has room for more bytes - than requested, the rest of the page will be used, - making the actual allocation bigger than requested. - (Note, the size may not be a multiple of the page size due - to buffer managment overhead.) - - This can only be updated when the current_tracer - is set to "nop". - - tracing_cpumask: This is a mask that lets the user only trace - on specified CPUS. The format is a hex string - representing the CPUS. - - set_ftrace_filter: When dynamic ftrace is configured in (see the - section below "dynamic ftrace"), the code is dynamically - modified (code text rewrite) to disable calling of the - function profiler (mcount). This lets tracing be configured - in with practically no overhead in performance. This also - has a side effect of enabling or disabling specific functions - to be traced. Echoing names of functions into this file - will limit the trace to only those functions. - - set_ftrace_notrace: This has an effect opposite to that of - set_ftrace_filter. Any function that is added here will not - be traced. If a function exists in both set_ftrace_filter - and set_ftrace_notrace, the function will _not_ be traced. - - set_ftrace_pid: Have the function tracer only trace a single thread. - - available_filter_functions: This lists the functions that ftrace - has processed and can trace. These are the function - names that you can pass to "set_ftrace_filter" or - "set_ftrace_notrace". (See the section "dynamic ftrace" - below for more details.) + current_tracer: + + This is used to set or display the current tracer + that is configured. + + available_tracers: + + This holds the different types of tracers that + have been compiled into the kernel. The + tracers listed here can be configured by + echoing their name into current_tracer. + + tracing_enabled: + + This sets or displays whether the current_tracer + is activated and tracing or not. Echo 0 into this + file to disable the tracer or 1 to enable it. + + trace: + + This file holds the output of the trace in a human + readable format (described below). + + latency_trace: + + This file shows the same trace but the information + is organized more to display possible latencies + in the system (described below). + + trace_pipe: + + The output is the same as the "trace" file but this + file is meant to be streamed with live tracing. + Reads from this file will block until new data + is retrieved. Unlike the "trace" and "latency_trace" + files, this file is a consumer. This means reading + from this file causes sequential reads to display + more current data. Once data is read from this + file, it is consumed, and will not be read + again with a sequential read. The "trace" and + "latency_trace" files are static, and if the + tracer is not adding more data, they will display + the same information every time they are read. + + trace_options: + + This file lets the user control the amount of data + that is displayed in one of the above output + files. + + tracing_max_latency: + + Some of the tracers record the max latency. + For example, the time interrupts are disabled. + This time is saved in this file. The max trace + will also be stored, and displayed by either + "trace" or "latency_trace". A new max trace will + only be recorded if the latency is greater than + the value in this file. (in microseconds) + + buffer_size_kb: + + This sets or displays the number of kilobytes each CPU + buffer can hold. The tracer buffers are the same size + for each CPU. The displayed number is the size of the + CPU buffer and not total size of all buffers. The + trace buffers are allocated in pages (blocks of memory + that the kernel uses for allocation, usually 4 KB in size). + If the last page allocated has room for more bytes + than requested, the rest of the page will be used, + making the actual allocation bigger than requested. + ( Note, the size may not be a multiple of the page size + due to buffer managment overhead. ) + + This can only be updated when the current_tracer + is set to "nop". + + tracing_cpumask: + + This is a mask that lets the user only trace + on specified CPUS. The format is a hex string + representing the CPUS. + + set_ftrace_filter: + + When dynamic ftrace is configured in (see the + section below "dynamic ftrace"), the code is dynamically + modified (code text rewrite) to disable calling of the + function profiler (mcount). This lets tracing be configured + in with practically no overhead in performance. This also + has a side effect of enabling or disabling specific functions + to be traced. Echoing names of functions into this file + will limit the trace to only those functions. + + set_ftrace_notrace: + + This has an effect opposite to that of + set_ftrace_filter. Any function that is added here will not + be traced. If a function exists in both set_ftrace_filter + and set_ftrace_notrace, the function will _not_ be traced. + + set_ftrace_pid: + + Have the function tracer only trace a single thread. + + set_graph_function: + + Set a "trigger" function where tracing should start + with the function graph tracer (See the section + "dynamic ftrace" for more details). + + available_filter_functions: + + This lists the functions that ftrace + has processed and can trace. These are the function + names that you can pass to "set_ftrace_filter" or + "set_ftrace_notrace". (See the section "dynamic ftrace" + below for more details.) The Tracers @@ -141,36 +175,66 @@ The Tracers Here is the list of current tracers that may be configured. - function - function tracer that uses mcount to trace all functions. + "function" + + Function call tracer to trace all kernel functions. + + "function_graph_tracer" + + Similar to the function tracer except that the + function tracer probes the functions on their entry + whereas the function graph tracer traces on both entry + and exit of the functions. It then provides the ability + to draw a graph of function calls similar to C code + source. - sched_switch - traces the context switches between tasks. + "sched_switch" - irqsoff - traces the areas that disable interrupts and saves - the trace with the longest max latency. - See tracing_max_latency. When a new max is recorded, - it replaces the old trace. It is best to view this - trace via the latency_trace file. + Traces the context switches and wakeups between tasks. - preemptoff - Similar to irqsoff but traces and records the amount of - time for which preemption is disabled. + "irqsoff" - preemptirqsoff - Similar to irqsoff and preemptoff, but traces and - records the largest time for which irqs and/or preemption - is disabled. + Traces the areas that disable interrupts and saves + the trace with the longest max latency. + See tracing_max_latency. When a new max is recorded, + it replaces the old trace. It is best to view this + trace via the latency_trace file. - wakeup - Traces and records the max latency that it takes for - the highest priority task to get scheduled after - it has been woken up. + "preemptoff" - nop - This is not a tracer. To remove all tracers from tracing - simply echo "nop" into current_tracer. + Similar to irqsoff but traces and records the amount of + time for which preemption is disabled. + + "preemptirqsoff" + + Similar to irqsoff and preemptoff, but traces and + records the largest time for which irqs and/or preemption + is disabled. + + "wakeup" + + Traces and records the max latency that it takes for + the highest priority task to get scheduled after + it has been woken up. + + "hw-branch-tracer" + + Uses the BTS CPU feature on x86 CPUs to traces all + branches executed. + + "nop" + + This is the "trace nothing" tracer. To remove all + tracers from tracing simply echo "nop" into + current_tracer. Examples of using the tracer ---------------------------- -Here are typical examples of using the tracers when controlling them only -with the debugfs interface (without using any user-land utilities). +Here are typical examples of using the tracers when controlling +them only with the debugfs interface (without using any +user-land utilities). Output format: -------------- @@ -187,16 +251,16 @@ Here is an example of the output format of the file "trace" bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput -------- -A header is printed with the tracer name that is represented by the trace. -In this case the tracer is "function". Then a header showing the format. Task -name "bash", the task PID "4251", the CPU that it was running on -"01", the timestamp in <secs>.<usecs> format, the function name that was -traced "path_put" and the parent function that called this function -"path_walk". The timestamp is the time at which the function was -entered. +A header is printed with the tracer name that is represented by +the trace. In this case the tracer is "function". Then a header +showing the format. Task name "bash", the task PID "4251", the +CPU that it was running on "01", the timestamp in <secs>.<usecs> +format, the function name that was traced "path_put" and the +parent function that called this function "path_walk". The +timestamp is the time at which the function was entered. -The sched_switch tracer also includes tracing of task wakeups and -context switches. +The sched_switch tracer also includes tracing of task wakeups +and context switches. ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S @@ -205,8 +269,8 @@ context switches. kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R -Wake ups are represented by a "+" and the context switches are shown as -"==>". The format is: +Wake ups are represented by a "+" and the context switches are +shown as "==>". The format is: Context switches: @@ -220,19 +284,20 @@ Wake ups are represented by a "+" and the context switches are shown as <pid>:<prio>:<state> + <pid>:<prio>:<state> -The prio is the internal kernel priority, which is the inverse of the -priority that is usually displayed by user-space tools. Zero represents -the highest priority (99). Prio 100 starts the "nice" priorities with -100 being equal to nice -20 and 139 being nice 19. The prio "140" is -reserved for the idle task which is the lowest priority thread (pid 0). +The prio is the internal kernel priority, which is the inverse +of the priority that is usually displayed by user-space tools. +Zero represents the highest priority (99). Prio 100 starts the +"nice" priorities with 100 being equal to nice -20 and 139 being +nice 19. The prio "140" is reserved for the idle task which is +the lowest priority thread (pid 0). Latency trace format -------------------- -For traces that display latency times, the latency_trace file gives -somewhat more information to see why a latency happened. Here is a typical -trace. +For traces that display latency times, the latency_trace file +gives somewhat more information to see why a latency happened. +Here is a typical trace. # tracer: irqsoff # @@ -259,20 +324,20 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 <idle>-0 0d.s1 98us : trace_hardirqs_on (do_softirq) +This shows that the current tracer is "irqsoff" tracing the time +for which interrupts were disabled. It gives the trace version +and the version of the kernel upon which this was executed on +(2.6.26-rc8). Then it displays the max latency in microsecs (97 +us). The number of trace entries displayed and the total number +recorded (both are three: #3/3). The type of preemption that was +used (PREEMPT). VP, KP, SP, and HP are always zero and are +reserved for later use. #P is the number of online CPUS (#P:2). -This shows that the current tracer is "irqsoff" tracing the time for which -interrupts were disabled. It gives the trace version and the version -of the kernel upon which this was executed on (2.6.26-rc8). Then it displays -the max latency in microsecs (97 us). The number of trace entries displayed -and the total number recorded (both are three: #3/3). The type of -preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero -and are reserved for later use. #P is the number of online CPUS (#P:2). - -The task is the process that was running when the latency occurred. -(swapper pid: 0). +The task is the process that was running when the latency +occurred. (swapper pid: 0). -The start and stop (the functions in which the interrupts were disabled and -enabled respectively) that caused the latencies: +The start and stop (the functions in which the interrupts were +disabled and enabled respectively) that caused the latencies: apic_timer_interrupt is where the interrupts were disabled. do_softirq is where they were enabled again. @@ -308,12 +373,12 @@ The above is mostly meaningful for kernel developers. latency_trace file is relative to the start of the trace. delay: This is just to help catch your eye a bit better. And - needs to be fixed to be only relative to the same CPU. - The marks are determined by the difference between this - current trace and the next trace. - '!' - greater than preempt_mark_thresh (default 100) - '+' - greater than 1 microsecond - ' ' - less than or equal to 1 microsecond. + needs to be fixed to be only relative to the same CPU. + The marks are determined by the difference between this + current trace and the next trace. + '!' - greater than preempt_mark_thresh (default 100) + '+' - greater than 1 microsecond + ' ' - less than or equal to 1 microsecond. The rest is the same as the 'trace' file. @@ -321,14 +386,15 @@ The above is mostly meaningful for kernel developers. trace_options ------------- -The trace_options file is used to control what gets printed in the trace -output. To see what is available, simply cat the file: +The trace_options file is used to control what gets printed in +the trace output. To see what is available, simply cat the file: cat /debug/tracing/trace_options print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ - noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj + noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj -To disable one of the options, echo in the option prepended with "no". +To disable one of the options, echo in the option prepended with +"no". echo noprint-parent > /debug/tracing/trace_options @@ -338,8 +404,8 @@ To enable an option, leave off the "no". Here are the available options: - print-parent - On function traces, display the calling function - as well as the function being traced. + print-parent - On function traces, display the calling (parent) + function as well as the function being traced. print-parent: bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul @@ -348,15 +414,16 @@ Here are the available options: bash-4000 [01] 1477.606694: simple_strtoul - sym-offset - Display not only the function name, but also the offset - in the function. For example, instead of seeing just - "ktime_get", you will see "ktime_get+0xb/0x20". + sym-offset - Display not only the function name, but also the + offset in the function. For example, instead of + seeing just "ktime_get", you will see + "ktime_get+0xb/0x20". sym-offset: bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0 - sym-addr - this will also display the function address as well as - the function name. + sym-addr - this will also display the function address as well + as the function name. sym-addr: bash-4000 [01] 1477.606694: simple_strtoul <c0339346> @@ -366,35 +433,41 @@ Here are the available options: bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ (+0.000ms): simple_strtoul (strict_strtoul) - raw - This will display raw numbers. This option is best for use with - user applications that can translate the raw numbers better than - having it done in the kernel. + raw - This will display raw numbers. This option is best for + use with user applications that can translate the raw + numbers better than having it done in the kernel. - hex - Similar to raw, but the numbers will be in a hexadecimal format. + hex - Similar to raw, but the numbers will be in a hexadecimal + format. bin - This will print out the formats in raw binary. block - TBD (needs update) - stacktrace - This is one of the options that changes the trace itself. - When a trace is recorded, so is the stack of functions. - This allows for back traces of trace sites. + stacktrace - This is one of the options that changes the trace + itself. When a trace is recorded, so is the stack + of functions. This allows for back traces of + trace sites. - userstacktrace - This option changes the trace. - It records a stacktrace of the current userspace thread. + userstacktrace - This option changes the trace. It records a + stacktrace of the current userspace thread. - sym-userobj - when user stacktrace are enabled, look up which object the - address belongs to, and print a relative address - This is especially useful when ASLR is on, otherwise you don't - get a chance to resolve the address to object/file/line after the app is no - longer running + sym-userobj - when user stacktrace are enabled, look up which + object the address belongs to, and print a + relative address. This is especially useful when + ASLR is on, otherwise you don't get a chance to + resolve the address to object/file/line after + the app is no longer running - The lookup is performed when you read trace,trace_pipe,latency_trace. Example: + The lookup is performed when you read + trace,trace_pipe,latency_trace. Example: a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0 x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] - sched-tree - TBD (any users??) + sched-tree - trace all tasks that are on the runqueue, at + every scheduling event. Will add overhead if + there's a lot of tasks running at once. sched_switch @@ -431,18 +504,19 @@ of how to use it. [...] -As we have discussed previously about this format, the header shows -the name of the trace and points to the options. The "FUNCTION" -is a misnomer since here it represents the wake ups and context -switches. +As we have discussed previously about this format, the header +shows the name of the trace and points to the options. The +"FUNCTION" is a misnomer since here it represents the wake ups +and context switches. -The sched_switch file only lists the wake ups (represented with '+') -and context switches ('==>') with the previous task or current task -first followed by the next task or task waking up. The format for both -of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO -is the inverse of the actual priority with zero (0) being the highest -priority and the nice values starting at 100 (nice -20). Below is -a quick chart to map the kernel priority to user land priorities. +The sched_switch file only lists the wake ups (represented with +'+') and context switches ('==>') with the previous task or +current task first followed by the next task or task waking up. +The format for both of these is PID:KERNEL-PRIO:TASK-STATE. +Remember that the KERNEL-PRIO is the inverse of the actual +priority with zero (0) being the highest priority and the nice +values starting at 100 (nice -20). Below is a quick chart to map +the kernel priority to user land priorities. Kernel priority: 0 to 99 ==> user RT priority 99 to 0 Kernel priority: 100 to 139 ==> user nice -20 to 19 @@ -463,10 +537,10 @@ The task states are: ftrace_enabled -------------- -The following tracers (listed below) give different output depending -on whether or not the sysctl ftrace_enabled is set. To set ftrace_enabled, -one can either use the sysctl function or set it via the proc -file system interface. +The following tracers (listed below) give different output +depending on whether or not the sysctl ftrace_enabled is set. To +set ftrace_enabled, one can either use the sysctl function or +set it via the proc file system interface. sysctl kernel.ftrace_enabled=1 @@ -474,12 +548,12 @@ file system interface. echo 1 > /proc/sys/kernel/ftrace_enabled -To disable ftrace_enabled simply replace the '1' with '0' in -the above commands. +To disable ftrace_enabled simply replace the '1' with '0' in the +above commands. -When ftrace_enabled is set the tracers will also record the functions -that are within the trace. The descriptions of the tracers -will also show an example with ftrace enabled. +When ftrace_enabled is set the tracers will also record the +functions that are within the trace. The descriptions of the +tracers will also show an example with ftrace enabled. irqsoff @@ -487,17 +561,18 @@ irqsoff When interrupts are disabled, the CPU can not react to any other external event (besides NMIs and SMIs). This prevents the timer -interrupt from triggering or the mouse interrupt from letting the -kernel know of a new mouse event. The result is a latency with the -reaction time. +interrupt from triggering or the mouse interrupt from letting +the kernel know of a new mouse event. The result is a latency +with the reaction time. -The irqsoff tracer tracks the time for which interrupts are disabled. -When a new maximum latency is hit, the tracer saves the trace leading up -to that latency point so that every time a new maximum is reached, the old -saved trace is discarded and the new trace is saved. +The irqsoff tracer tracks the time for which interrupts are +disabled. When a new maximum latency is hit, the tracer saves +the trace leading up to that latency point so that every time a +new maximum is reached, the old saved trace is discarded and the +new trace is saved. -To reset the maximum, echo 0 into tracing_max_latency. Here is an -example: +To reset the maximum, echo 0 into tracing_max_latency. Here is +an example: # echo irqsoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -532,10 +607,11 @@ irqsoff latency trace v1.1.5 on 2.6.26 Here we see that that we had a latency of 12 microsecs (which is -very good). The _write_lock_irq in sys_setpgid disabled interrupts. -The difference between the 12 and the displayed timestamp 14us occurred -because the clock was incremented between the time of recording the max -latency and the time of recording the function that had that latency. +very good). The _write_lock_irq in sys_setpgid disabled +interrupts. The difference between the 12 and the displayed +timestamp 14us occurred because the clock was incremented +between the time of recording the max latency and the time of +recording the function that had that latency. Note the above example had ftrace_enabled not set. If we set the ftrace_enabled, we get a much larger output: @@ -586,24 +662,24 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 Here we traced a 50 microsecond latency. But we also see all the -functions that were called during that time. Note that by enabling -function tracing, we incur an added overhead. This overhead may -extend the latency times. But nevertheless, this trace has provided -some very helpful debugging information. +functions that were called during that time. Note that by +enabling function tracing, we incur an added overhead. This +overhead may extend the latency times. But nevertheless, this +trace has provided some very helpful debugging information. preemptoff ---------- -When preemption is disabled, we may be able to receive interrupts but -the task cannot be preempted and a higher priority task must wait -for preemption to be enabled again before it can preempt a lower -priority task. +When preemption is disabled, we may be able to receive +interrupts but the task cannot be preempted and a higher +priority task must wait for preemption to be enabled again +before it can preempt a lower priority task. The preemptoff tracer traces the places that disable preemption. -Like the irqsoff tracer, it records the maximum latency for which preemption -was disabled. The control of preemptoff tracer is much like the irqsoff -tracer. +Like the irqsoff tracer, it records the maximum latency for +which preemption was disabled. The control of preemptoff tracer +is much like the irqsoff tracer. # echo preemptoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -637,11 +713,12 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) -This has some more changes. Preemption was disabled when an interrupt -came in (notice the 'h'), and was enabled while doing a softirq. -(notice the 's'). But we also see that interrupts have been disabled -when entering the preempt off section and leaving it (the 'd'). -We do not know if interrupts were enabled in the mean time. +This has some more changes. Preemption was disabled when an +interrupt came in (notice the 'h'), and was enabled while doing +a softirq. (notice the 's'). But we also see that interrupts +have been disabled when entering the preempt off section and +leaving it (the 'd'). We do not know if interrupts were enabled +in the mean time. # tracer: preemptoff # @@ -700,28 +777,30 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq) -The above is an example of the preemptoff trace with ftrace_enabled -set. Here we see that interrupts were disabled the entire time. -The irq_enter code lets us know that we entered an interrupt 'h'. -Before that, the functions being traced still show that it is not -in an interrupt, but we can see from the functions themselves that -this is not the case. +The above is an example of the preemptoff trace with +ftrace_enabled set. Here we see that interrupts were disabled +the entire time. The irq_enter code lets us know that we entered +an interrupt 'h'. Before that, the functions being traced still +show that it is not in an interrupt, but we can see from the +functions themselves that this is not the case. -Notice that __do_softirq when called does not have a preempt_count. -It may seem that we missed a preempt enabling. What really happened -is that the preempt count is held on the thread's stack and we -switched to the softirq stack (4K stacks in effect). The code -does not copy the preempt count, but because interrupts are disabled, -we do not need to worry about it. Having a tracer like this is good -for letting people know what really happens inside the kernel. +Notice that __do_softirq when called does not have a +preempt_count. It may seem that we missed a preempt enabling. +What really happened is that the preempt count is held on the +thread's stack and we switched to the softirq stack (4K stacks +in effect). The code does not copy the preempt count, but +because interrupts are disabled, we do not need to worry about +it. Having a tracer like this is good for letting people know +what really happens inside the kernel. preemptirqsoff -------------- -Knowing the locations that have interrupts disabled or preemption -disabled for the longest times is helpful. But sometimes we would -like to know when either preemption and/or interrupts are disabled. +Knowing the locations that have interrupts disabled or +preemption disabled for the longest times is helpful. But +sometimes we would like to know when either preemption and/or +interrupts are disabled. Consider the following code: @@ -741,11 +820,13 @@ The preemptoff tracer will record the total length of call_function_with_irqs_and_preemption_off() and call_function_with_preemption_off(). -But neither will trace the time that interrupts and/or preemption -is disabled. This total time is the time that we can not schedule. -To record this time, use the preemptirqsoff tracer. +But neither will trace the time that interrupts and/or +preemption is disabled. This total time is the time that we can +not schedule. To record this time, use the preemptirqsoff +tracer. -Again, using this trace is much like the irqsoff and preemptoff tracers. +Again, using this trace is much like the irqsoff and preemptoff +tracers. # echo preemptirqsoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -781,9 +862,10 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 The trace_hardirqs_off_thunk is called from assembly on x86 when -interrupts are disabled in the assembly code. Without the function -tracing, we do not know if interrupts were enabled within the preemption -points. We do see that it started with preemption enabled. +interrupts are disabled in the assembly code. Without the +function tracing, we do not know if interrupts were enabled +within the preemption points. We do see that it started with +preemption enabled. Here is a trace with ftrace_enabled set: @@ -871,40 +953,42 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq) -This is a very interesting trace. It started with the preemption of -the ls task. We see that the task had the "need_resched" bit set -via the 'N' in the trace. Interrupts were disabled before the spin_lock -at the beginning of the trace. We see that a schedule took place to run -sshd. When the interrupts were enabled, we took an interrupt. -On return from the interrupt handler, the softirq ran. We took another -interrupt while running the softirq as we see from the capital 'H'. +This is a very interesting trace. It started with the preemption +of the ls task. We see that the task had the "need_resched" bit +set via the 'N' in the trace. Interrupts were disabled before +the spin_lock at the beginning of the trace. We see that a +schedule took place to run sshd. When the interrupts were +enabled, we took an interrupt. On return from the interrupt +handler, the softirq ran. We took another interrupt while +running the softirq as we see from the capital 'H'. wakeup ------ -In a Real-Time environment it is very important to know the wakeup -time it takes for the highest priority task that is woken up to the -time that it executes. This is also known as "schedule latency". -I stress the point that this is about RT tasks. It is also important -to know the scheduling latency of non-RT tasks, but the average -schedule latency is better for non-RT tasks. Tools like -LatencyTop are more appropriate for such measurements. +In a Real-Time environment it is very important to know the +wakeup time it takes for the highest priority task that is woken +up to the time that it executes. This is also known as "schedule +latency". I stress the point that this is about RT tasks. It is +also important to know the scheduling latency of non-RT tasks, +but the average schedule latency is better for non-RT tasks. +Tools like LatencyTop are more appropriate for such +measurements. Real-Time environments are interested in the worst case latency. -That is the longest latency it takes for something to happen, and -not the average. We can have a very fast scheduler that may only -have a large latency once in a while, but that would not work well -with Real-Time tasks. The wakeup tracer was designed to record -the worst case wakeups of RT tasks. Non-RT tasks are not recorded -because the tracer only records one worst case and tracing non-RT -tasks that are unpredictable will overwrite the worst case latency -of RT tasks. - -Since this tracer only deals with RT tasks, we will run this slightly -differently than we did with the previous tracers. Instead of performing -an 'ls', we will run 'sleep 1' under 'chrt' which changes the -priority of the task. +That is the longest latency it takes for something to happen, +and not the average. We can have a very fast scheduler that may +only have a large latency once in a while, but that would not +work well with Real-Time tasks. The wakeup tracer was designed +to record the worst case wakeups of RT tasks. Non-RT tasks are +not recorded because the tracer only records one worst case and +tracing non-RT tasks that are unpredictable will overwrite the +worst case latency of RT tasks. + +Since this tracer only deals with RT tasks, we will run this +slightly differently than we did with the previous tracers. +Instead of performing an 'ls', we will run 'sleep 1' under +'chrt' which changes the priority of the task. # echo wakeup > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -934,17 +1018,16 @@ wakeup latency trace v1.1.5 on 2.6.26-rc8 <idle>-0 1d..4 4us : schedule (cpu_idle) +Running this on an idle system, we see that it only took 4 +microseconds to perform the task switch. Note, since the trace +marker in the schedule is before the actual "switch", we stop +the tracing when the recorded task is about to schedule in. This +may change if we add a new marker at the end of the scheduler. -Running this on an idle system, we see that it only took 4 microseconds -to perform the task switch. Note, since the trace marker in the -schedule is before the actual "switch", we stop the tracing when -the recorded task is about to schedule in. This may change if -we add a new marker at the end of the scheduler. - -Notice that the recorded task is 'sleep' with the PID of 4901 and it -has an rt_prio of 5. This priority is user-space priority and not -the internal kernel priority. The policy is 1 for SCHED_FIFO and 2 -for SCHED_RR. +Notice that the recorded task is 'sleep' with the PID of 4901 +and it has an rt_prio of 5. This priority is user-space priority +and not the internal kernel priority. The policy is 1 for +SCHED_FIFO and 2 for SCHED_RR. Doing the same with chrt -r 5 and ftrace_enabled set. @@ -1001,24 +1084,25 @@ ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline) ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) ksoftirq-7 1d..4 50us : schedule (__cond_resched) -The interrupt went off while running ksoftirqd. This task runs at -SCHED_OTHER. Why did not we see the 'N' set early? This may be -a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K stacks -configured, the interrupt and softirq run with their own stack. -Some information is held on the top of the task's stack (need_resched -and preempt_count are both stored there). The setting of the NEED_RESCHED -bit is done directly to the task's stack, but the reading of the -NEED_RESCHED is done by looking at the current stack, which in this case -is the stack for the hard interrupt. This hides the fact that NEED_RESCHED -has been set. We do not see the 'N' until we switch back to the task's +The interrupt went off while running ksoftirqd. This task runs +at SCHED_OTHER. Why did not we see the 'N' set early? This may +be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K +stacks configured, the interrupt and softirq run with their own +stack. Some information is held on the top of the task's stack +(need_resched and preempt_count are both stored there). The +setting of the NEED_RESCHED bit is done directly to the task's +stack, but the reading of the NEED_RESCHED is done by looking at +the current stack, which in this case is the stack for the hard +interrupt. This hides the fact that NEED_RESCHED has been set. +We do not see the 'N' until we switch back to the task's assigned stack. function -------- This tracer is the function tracer. Enabling the function tracer -can be done from the debug file system. Make sure the ftrace_enabled is -set; otherwise this tracer is a nop. +can be done from the debug file system. Make sure the +ftrace_enabled is set; otherwise this tracer is a nop. # sysctl kernel.ftrace_enabled=1 # echo function > /debug/tracing/current_tracer @@ -1048,14 +1132,15 @@ set; otherwise this tracer is a nop. [...] -Note: function tracer uses ring buffers to store the above entries. -The newest data may overwrite the oldest data. Sometimes using echo to -stop the trace is not sufficient because the tracing could have overwritten -the data that you wanted to record. For this reason, it is sometimes better to -disable tracing directly from a program. This allows you to stop the -tracing at the point that you hit the part that you are interested in. -To disable the tracing directly from a C program, something like following -code snippet can be used: +Note: function tracer uses ring buffers to store the above +entries. The newest data may overwrite the oldest data. +Sometimes using echo to stop the trace is not sufficient because +the tracing could have overwritten the data that you wanted to +record. For this reason, it is sometimes better to disable +tracing directly from a program. This allows you to stop the +tracing at the point that you hit the part that you are +interested in. To disable the tracing directly from a C program, +something like following code snippet can be used: int trace_fd; [...] @@ -1070,10 +1155,10 @@ int main(int argc, char *argv[]) { } Note: Here we hard coded the path name. The debugfs mount is not -guaranteed to be at /debug (and is more commonly at /sys/kernel/debug). -For simple one time traces, the above is sufficent. For anything else, -a search through /proc/mounts may be needed to find where the debugfs -file-system is mounted. +guaranteed to be at /debug (and is more commonly at +/sys/kernel/debug). For simple one time traces, the above is +sufficent. For anything else, a search through /proc/mounts may +be needed to find where the debugfs file-system is mounted. Single thread tracing @@ -1152,49 +1237,297 @@ int main (int argc, char **argv) return 0; } + +hw-branch-tracer (x86 only) +--------------------------- + +This tracer uses the x86 last branch tracing hardware feature to +collect a branch trace on all cpus with relatively low overhead. + +The tracer uses a fixed-size circular buffer per cpu and only +traces ring 0 branches. The trace file dumps that buffer in the +following format: + +# tracer: hw-branch-tracer +# +# CPU# TO <- FROM + 0 scheduler_tick+0xb5/0x1bf <- task_tick_idle+0x5/0x6 + 2 run_posix_cpu_timers+0x2b/0x72a <- run_posix_cpu_timers+0x25/0x72a + 0 scheduler_tick+0x139/0x1bf <- scheduler_tick+0xed/0x1bf + 0 scheduler_tick+0x17c/0x1bf <- scheduler_tick+0x148/0x1bf + 2 run_posix_cpu_timers+0x9e/0x72a <- run_posix_cpu_timers+0x5e/0x72a + 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf + + +The tracer may be used to dump the trace for the oops'ing cpu on +a kernel oops into the system log. To enable this, +ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one +can either use the sysctl function or set it via the proc system +interface. + + sysctl kernel.ftrace_dump_on_oops=1 + +or + + echo 1 > /proc/sys/kernel/ftrace_dump_on_oops + + +Here's an example of such a dump after a null pointer +dereference in a kernel module: + +[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 +[57848.106019] IP: [<ffffffffa0000006>] open+0x6/0x14 [oops] +[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0 +[57848.106019] Oops: 0002 [#1] SMP +[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus +[57848.106019] Dumping ftrace buffer: +[57848.106019] --------------------------------- +[...] +[57848.106019] 0 chrdev_open+0xe6/0x165 <- cdev_put+0x23/0x24 +[57848.106019] 0 chrdev_open+0x117/0x165 <- chrdev_open+0xfa/0x165 +[57848.106019] 0 chrdev_open+0x120/0x165 <- chrdev_open+0x11c/0x165 +[57848.106019] 0 chrdev_open+0x134/0x165 <- chrdev_open+0x12b/0x165 +[57848.106019] 0 open+0x0/0x14 [oops] <- chrdev_open+0x144/0x165 +[57848.106019] 0 page_fault+0x0/0x30 <- open+0x6/0x14 [oops] +[57848.106019] 0 error_entry+0x0/0x5b <- page_fault+0x4/0x30 +[57848.106019] 0 error_kernelspace+0x0/0x31 <- error_entry+0x59/0x5b +[57848.106019] 0 error_sti+0x0/0x1 <- error_kernelspace+0x2d/0x31 +[57848.106019] 0 page_fault+0x9/0x30 <- error_sti+0x0/0x1 +[57848.106019] 0 do_page_fault+0x0/0x881 <- page_fault+0x1a/0x30 +[...] +[57848.106019] 0 do_page_fault+0x66b/0x881 <- is_prefetch+0x1ee/0x1f2 +[57848.106019] 0 do_page_fault+0x6e0/0x881 <- do_page_fault+0x67a/0x881 +[57848.106019] 0 oops_begin+0x0/0x96 <- do_page_fault+0x6e0/0x881 +[57848.106019] 0 trace_hw_branch_oops+0x0/0x2d <- oops_begin+0x9/0x96 +[...] +[57848.106019] 0 ds_suspend_bts+0x2a/0xe3 <- ds_suspend_bts+0x1a/0xe3 +[57848.106019] --------------------------------- +[57848.106019] CPU 0 +[57848.106019] Modules linked in: oops +[57848.106019] Pid: 5542, comm: cat Tainted: G W 2.6.28 #23 +[57848.106019] RIP: 0010:[<ffffffffa0000006>] [<ffffffffa0000006>] open+0x6/0x14 [oops] +[57848.106019] RSP: 0018:ffff880235457d48 EFLAGS: 00010246 +[...] + + +function graph tracer +--------------------------- + +This tracer is similar to the function tracer except that it +probes a function on its entry and its exit. This is done by +using a dynamically allocated stack of return addresses in each +task_struct. On function entry the tracer overwrites the return +address of each function traced to set a custom probe. Thus the +original return address is stored on the stack of return address +in the task_struct. + +Probing on both ends of a function leads to special features +such as: + +- measure of a function's time execution +- having a reliable call stack to draw function calls graph + +This tracer is useful in several situations: + +- you want to find the reason of a strange kernel behavior and + need to see what happens in detail on any areas (or specific + ones). + +- you are experiencing weird latencies but it's difficult to + find its origin. + +- you want to find quickly which path is taken by a specific + function + +- you just want to peek inside a working kernel and want to see + what happens there. + +# tracer: function_graph +# +# CPU DURATION FUNCTION CALLS +# | | | | | | | + + 0) | sys_open() { + 0) | do_sys_open() { + 0) | getname() { + 0) | kmem_cache_alloc() { + 0) 1.382 us | __might_sleep(); + 0) 2.478 us | } + 0) | strncpy_from_user() { + 0) | might_fault() { + 0) 1.389 us | __might_sleep(); + 0) 2.553 us | } + 0) 3.807 us | } + 0) 7.876 us | } + 0) | alloc_fd() { + 0) 0.668 us | _spin_lock(); + 0) 0.570 us | expand_files(); + 0) 0.586 us | _spin_unlock(); + + +There are several columns that can be dynamically +enabled/disabled. You can use every combination of options you +want, depending on your needs. + +- The cpu number on which the function executed is default + enabled. It is sometimes better to only trace one cpu (see + tracing_cpu_mask file) or you might sometimes see unordered + function calls while cpu tracing switch. + + hide: echo nofuncgraph-cpu > /debug/tracing/trace_options + show: echo funcgraph-cpu > /debug/tracing/trace_options + +- The duration (function's time of execution) is displayed on + the closing bracket line of a function or on the same line + than the current function in case of a leaf one. It is default + enabled. + + hide: echo nofuncgraph-duration > /debug/tracing/trace_options + show: echo funcgraph-duration > /debug/tracing/trace_options + +- The overhead field precedes the duration field in case of + reached duration thresholds. + + hide: echo nofuncgraph-overhead > /debug/tracing/trace_options + show: echo funcgraph-overhead > /debug/tracing/trace_options + depends on: funcgraph-duration + + ie: + + 0) | up_write() { + 0) 0.646 us | _spin_lock_irqsave(); + 0) 0.684 us | _spin_unlock_irqrestore(); + 0) 3.123 us | } + 0) 0.548 us | fput(); + 0) + 58.628 us | } + + [...] + + 0) | putname() { + 0) | kmem_cache_free() { + 0) 0.518 us | __phys_addr(); + 0) 1.757 us | } + 0) 2.861 us | } + 0) ! 115.305 us | } + 0) ! 116.402 us | } + + + means that the function exceeded 10 usecs. + ! means that the function exceeded 100 usecs. + + +- The task/pid field displays the thread cmdline and pid which + executed the function. It is default disabled. + + hide: echo nofuncgraph-proc > /debug/tracing/trace_options + show: echo funcgraph-proc > /debug/tracing/trace_options + + ie: + + # tracer: function_graph + # + # CPU TASK/PID DURATION FUNCTION CALLS + # | | | | | | | | | + 0) sh-4802 | | d_free() { + 0) sh-4802 | | call_rcu() { + 0) sh-4802 | | __call_rcu() { + 0) sh-4802 | 0.616 us | rcu_process_gp_end(); + 0) sh-4802 | 0.586 us | check_for_new_grace_period(); + 0) sh-4802 | 2.899 us | } + 0) sh-4802 | 4.040 us | } + 0) sh-4802 | 5.151 us | } + 0) sh-4802 | + 49.370 us | } + + +- The absolute time field is an absolute timestamp given by the + system clock since it started. A snapshot of this time is + given on each entry/exit of functions + + hide: echo nofuncgraph-abstime > /debug/tracing/trace_options + show: echo funcgraph-abstime > /debug/tracing/trace_options + + ie: + + # + # TIME CPU DURATION FUNCTION CALLS + # | | | | | | | | + 360.774522 | 1) 0.541 us | } + 360.774522 | 1) 4.663 us | } + 360.774523 | 1) 0.541 us | __wake_up_bit(); + 360.774524 | 1) 6.796 us | } + 360.774524 | 1) 7.952 us | } + 360.774525 | 1) 9.063 us | } + 360.774525 | 1) 0.615 us | journal_mark_dirty(); + 360.774527 | 1) 0.578 us | __brelse(); + 360.774528 | 1) | reiserfs_prepare_for_journal() { + 360.774528 | 1) | unlock_buffer() { + 360.774529 | 1) | wake_up_bit() { + 360.774529 | 1) | bit_waitqueue() { + 360.774530 | 1) 0.594 us | __phys_addr(); + + +You can put some comments on specific functions by using +trace_printk() For example, if you want to put a comment inside +the __might_sleep() function, you just have to include +<linux/ftrace.h> and call trace_printk() inside __might_sleep() + +trace_printk("I'm a comment!\n") + +will produce: + + 1) | __might_sleep() { + 1) | /* I'm a comment! */ + 1) 1.449 us | } + + +You might find other useful features for this tracer in the +following "dynamic ftrace" section such as tracing only specific +functions or tasks. + dynamic ftrace -------------- If CONFIG_DYNAMIC_FTRACE is set, the system will run with virtually no overhead when function tracing is disabled. The way this works is the mcount function call (placed at the start of -every kernel function, produced by the -pg switch in gcc), starts -of pointing to a simple return. (Enabling FTRACE will include the --pg switch in the compiling of the kernel.) +every kernel function, produced by the -pg switch in gcc), +starts of pointing to a simple return. (Enabling FTRACE will +include the -pg switch in the compiling of the kernel.) At compile time every C file object is run through the recordmcount.pl script (located in the scripts directory). This script will process the C object using objdump to find all the -locations in the .text section that call mcount. (Note, only -the .text section is processed, since processing other sections -like .init.text may cause races due to those sections being freed). +locations in the .text section that call mcount. (Note, only the +.text section is processed, since processing other sections like +.init.text may cause races due to those sections being freed). -A new section called "__mcount_loc" is created that holds references -to all the mcount call sites in the .text section. This section is -compiled back into the original object. The final linker will add -all these references into a single table. +A new section called "__mcount_loc" is created that holds +references to all the mcount call sites in the .text section. +This section is compiled back into the original object. The +final linker will add all these references into a single table. On boot up, before SMP is initialized, the dynamic ftrace code -scans this table and updates all the locations into nops. It also -records the locations, which are added to the available_filter_functions -list. Modules are processed as they are loaded and before they are -executed. When a module is unloaded, it also removes its functions from -the ftrace function list. This is automatic in the module unload -code, and the module author does not need to worry about it. - -When tracing is enabled, kstop_machine is called to prevent races -with the CPUS executing code being modified (which can cause the -CPU to do undesireable things), and the nops are patched back -to calls. But this time, they do not call mcount (which is just -a function stub). They now call into the ftrace infrastructure. +scans this table and updates all the locations into nops. It +also records the locations, which are added to the +available_filter_functions list. Modules are processed as they +are loaded and before they are executed. When a module is +unloaded, it also removes its functions from the ftrace function +list. This is automatic in the module unload code, and the +module author does not need to worry about it. + +When tracing is enabled, kstop_machine is called to prevent +races with the CPUS executing code being modified (which can +cause the CPU to do undesireable things), and the nops are +patched back to calls. But this time, they do not call mcount +(which is just a function stub). They now call into the ftrace +infrastructure. One special side-effect to the recording of the functions being traced is that we can now selectively choose which functions we -wish to trace and which ones we want the mcount calls to remain as -nops. +wish to trace and which ones we want the mcount calls to remain +as nops. -Two files are used, one for enabling and one for disabling the tracing -of specified functions. They are: +Two files are used, one for enabling and one for disabling the +tracing of specified functions. They are: set_ftrace_filter @@ -1202,8 +1535,8 @@ and set_ftrace_notrace -A list of available functions that you can add to these files is listed -in: +A list of available functions that you can add to these files is +listed in: available_filter_functions @@ -1240,8 +1573,8 @@ hrtimer_interrupt sys_nanosleep -Perhaps this is not enough. The filters also allow simple wild cards. -Only the following are currently available +Perhaps this is not enough. The filters also allow simple wild +cards. Only the following are currently available <match>* - will match functions that begin with <match> *<match> - will match functions that end with <match> @@ -1251,9 +1584,9 @@ These are the only wild cards which are supported. <match>*<match> will not work. -Note: It is better to use quotes to enclose the wild cards, otherwise - the shell may expand the parameters into names of files in the local - directory. +Note: It is better to use quotes to enclose the wild cards, + otherwise the shell may expand the parameters into names + of files in the local directory. # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter @@ -1299,7 +1632,8 @@ This is because the '>' and '>>' act just like they do in bash. To rewrite the filters, use '>' To append to the filters, use '>>' -To clear out a filter so that all functions will be recorded again: +To clear out a filter so that all functions will be recorded +again: # echo > /debug/tracing/set_ftrace_filter # cat /debug/tracing/set_ftrace_filter @@ -1331,7 +1665,8 @@ hrtimer_get_res hrtimer_init_sleeper -The set_ftrace_notrace prevents those functions from being traced. +The set_ftrace_notrace prevents those functions from being +traced. # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace @@ -1353,13 +1688,75 @@ Produces: We can see that there's no more lock or preempt tracing. + +Dynamic ftrace with the function graph tracer +--------------------------------------------- + +Although what has been explained above concerns both the +function tracer and the function-graph-tracer, there are some +special features only available in the function-graph tracer. + +If you want to trace only one function and all of its children, +you just have to echo its name into set_graph_function: + + echo __do_fault > set_graph_function + +will produce the following "expanded" trace of the __do_fault() +function: + + 0) | __do_fault() { + 0) | filemap_fault() { + 0) | find_lock_page() { + 0) 0.804 us | find_get_page(); + 0) | __might_sleep() { + 0) 1.329 us | } + 0) 3.904 us | } + 0) 4.979 us | } + 0) 0.653 us | _spin_lock(); + 0) 0.578 us | page_add_file_rmap(); + 0) 0.525 us | native_set_pte_at(); + 0) 0.585 us | _spin_unlock(); + 0) | unlock_page() { + 0) 0.541 us | page_waitqueue(); + 0) 0.639 us | __wake_up_bit(); + 0) 2.786 us | } + 0) + 14.237 us | } + 0) | __do_fault() { + 0) | filemap_fault() { + 0) | find_lock_page() { + 0) 0.698 us | find_get_page(); + 0) | __might_sleep() { + 0) 1.412 us | } + 0) 3.950 us | } + 0) 5.098 us | } + 0) 0.631 us | _spin_lock(); + 0) 0.571 us | page_add_file_rmap(); + 0) 0.526 us | native_set_pte_at(); + 0) 0.586 us | _spin_unlock(); + 0) | unlock_page() { + 0) 0.533 us | page_waitqueue(); + 0) 0.638 us | __wake_up_bit(); + 0) 2.793 us | } + 0) + 14.012 us | } + +You can also expand several functions at once: + + echo sys_open > set_graph_function + echo sys_close >> set_graph_function + +Now if you want to go back to trace all functions you can clear +this special filter via: + + echo > set_graph_function + + trace_pipe ---------- -The trace_pipe outputs the same content as the trace file, but the effect -on the tracing is different. Every read from trace_pipe is consumed. -This means that subsequent reads will be different. The trace -is live. +The trace_pipe outputs the same content as the trace file, but +the effect on the tracing is different. Every read from +trace_pipe is consumed. This means that subsequent reads will be +different. The trace is live. # echo function > /debug/tracing/current_tracer # cat /debug/tracing/trace_pipe > /tmp/trace.out & @@ -1387,38 +1784,45 @@ is live. bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up -Note, reading the trace_pipe file will block until more input is added. -By changing the tracer, trace_pipe will issue an EOF. We needed -to set the function tracer _before_ we "cat" the trace_pipe file. +Note, reading the trace_pipe file will block until more input is +added. By changing the tracer, trace_pipe will issue an EOF. We +needed to set the function tracer _before_ we "cat" the +trace_pipe file. trace entries ------------- -Having too much or not enough data can be troublesome in diagnosing -an issue in the kernel. The file buffer_size_kb is used to modify -the size of the internal trace buffers. The number listed -is the number of entries that can be recorded per CPU. To know -the full size, multiply the number of possible CPUS with the -number of entries. +Having too much or not enough data can be troublesome in +diagnosing an issue in the kernel. The file buffer_size_kb is +used to modify the size of the internal trace buffers. The +number listed is the number of entries that can be recorded per +CPU. To know the full size, multiply the number of possible CPUS +with the number of entries. # cat /debug/tracing/buffer_size_kb 1408 (units kilobytes) -Note, to modify this, you must have tracing completely disabled. To do that, -echo "nop" into the current_tracer. If the current_tracer is not set -to "nop", an EINVAL error will be returned. +Note, to modify this, you must have tracing completely disabled. +To do that, echo "nop" into the current_tracer. If the +current_tracer is not set to "nop", an EINVAL error will be +returned. # echo nop > /debug/tracing/current_tracer # echo 10000 > /debug/tracing/buffer_size_kb # cat /debug/tracing/buffer_size_kb 10000 (units kilobytes) -The number of pages which will be allocated is limited to a percentage -of available memory. Allocating too much will produce an error. +The number of pages which will be allocated is limited to a +percentage of available memory. Allocating too much will produce +an error. # echo 1000000000000 > /debug/tracing/buffer_size_kb -bash: echo: write error: Cannot allocate memory # cat /debug/tracing/buffer_size_kb 85 +----------- + +More details can be found in the source code, in the +kernel/tracing/*.c files. diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index b1b988701247..145c25a170c7 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -123,7 +123,10 @@ platform-specific implementation issue. Using GPIOs ----------- -One of the first things to do with a GPIO, often in board setup code when +The first thing a system should do with a GPIO is allocate it, using +the gpio_request() call; see later. + +One of the next things to do with a GPIO, often in board setup code when setting up a platform_device using the GPIO, is mark its direction: /* set as input or output, returning 0 or negative errno */ @@ -141,8 +144,8 @@ This helps avoid signal glitching during system startup. For compatibility with legacy interfaces to GPIOs, setting the direction of a GPIO implicitly requests that GPIO (see below) if it has not been -requested already. That compatibility may be removed in the future; -explicitly requesting GPIOs is strongly preferred. +requested already. That compatibility is being removed from the optional +gpiolib framework. Setting the direction can fail if the GPIO number is invalid, or when that particular GPIO can't be used in that mode. It's generally a bad @@ -195,7 +198,7 @@ This requires sleeping, which can't be done from inside IRQ handlers. Platforms that support this type of GPIO distinguish them from other GPIOs by returning nonzero from this call (which requires a valid GPIO number, -either explicitly or implicitly requested): +which should have been previously allocated with gpio_request): int gpio_cansleep(unsigned gpio); @@ -212,10 +215,9 @@ for GPIOs that can't be accessed from IRQ handlers, these calls act the same as the spinlock-safe calls. -Claiming and Releasing GPIOs (OPTIONAL) ---------------------------------------- +Claiming and Releasing GPIOs +---------------------------- To help catch system configuration errors, two calls are defined. -However, many platforms don't currently support this mechanism. /* request GPIO, returning 0 or negative errno. * non-null labels may be useful for diagnostics. @@ -244,13 +246,6 @@ Some platforms may also use knowledge about what GPIOs are active for power management, such as by powering down unused chip sectors and, more easily, gating off unused clocks. -These two calls are optional because not not all current Linux platforms -offer such functionality in their GPIO support; a valid implementation -could return success for all gpio_request() calls. Unlike the other calls, -the state they represent doesn't normally match anything from a hardware -register; it's just a software bitmap which clearly is not necessary for -correct operation of hardware or (bug free) drivers. - Note that requesting a GPIO does NOT cause it to be configured in any way; it just marks that GPIO as in use. Separate code must handle any pin setup (e.g. controlling which pin the GPIO uses, pullup/pulldown). diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt index 84f7cb3d5bec..ffb5c80bec3e 100644 --- a/Documentation/ia64/kvm.txt +++ b/Documentation/ia64/kvm.txt @@ -42,7 +42,7 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe hg clone http://xenbits.xensource.com/ext/efi-vfirmware.hg you can get the firmware's binary in the directory of efi-vfirmware.hg/binaries. - (3) Rename the firware you owned to Flash.fd, and copy it to /usr/local/share/qemu + (3) Rename the firmware you owned to Flash.fd, and copy it to /usr/local/share/qemu 4. Boot up Linux or Windows guests: 4.1 Create or install a image for guest boot. If you have xen experience, it should be easy. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8b2067cceadc..8e3f6e943866 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -50,6 +50,7 @@ parameter is applicable: ISAPNP ISA PnP code is enabled. ISDN Appropriate ISDN support is enabled. JOY Appropriate joystick support is enabled. + KMEMTRACE kmemtrace is enabled. LIBATA Libata driver is enabled LP Printer support is enabled. LOOP Loopback device support is enabled. @@ -617,6 +618,9 @@ and is between 256 and 4096 characters. It is defined in the file debug_objects [KNL] Enable object debugging + no_debug_objects + [KNL] Disable object debugging + debugpat [X86] Enable PAT debugging decnet.addr= [HW,NET] @@ -1078,6 +1082,15 @@ and is between 256 and 4096 characters. It is defined in the file use the HighMem zone if it exists, and the Normal zone if it does not. + kmemtrace.enable= [KNL,KMEMTRACE] Format: { yes | no } + Controls whether kmemtrace is enabled + at boot-time. + + kmemtrace.subbufs=n [KNL,KMEMTRACE] Overrides the number of + subbufs kmemtrace's relay channel has. Set this + higher than default (KMEMTRACE_N_SUBBUFS in code) if + you experience buffer overruns. + movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter is similar to kernelcore except it specifies the amount of memory used for migratable allocations. @@ -1523,7 +1536,9 @@ and is between 256 and 4096 characters. It is defined in the file noclflush [BUGS=X86] Don't use the CLFLUSH instruction - nohlt [BUGS=ARM,SH] + nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or + wfi(ARM) instruction doesn't work correctly and not to + use it. This is also useful when using JTAG debugger. no-hlt [BUGS=X86-32] Tells the kernel that the hlt instruction doesn't work correctly and not to @@ -1605,7 +1620,7 @@ and is between 256 and 4096 characters. It is defined in the file nosoftlockup [KNL] Disable the soft-lockup detector. noswapaccount [KNL] Disable accounting of swap in memory resource - controller. (See Documentation/controllers/memory.txt) + controller. (See Documentation/cgroups/memory.txt) nosync [HW,M68K] Disables sync negotiation for all devices. @@ -1955,7 +1970,7 @@ and is between 256 and 4096 characters. It is defined in the file relax_domain_level= [KNL, SMP] Set scheduler's default relax_domain_level. - See Documentation/cpusets.txt. + See Documentation/cgroups/cpusets.txt. reserve= [KNL,BUGS] Force the kernel to ignore some iomem area @@ -2364,6 +2379,8 @@ and is between 256 and 4096 characters. It is defined in the file tp720= [HW,PS2] + trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size. + trix= [HW,OSS] MediaTrix AudioTrix Pro Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> diff --git a/Documentation/md.txt b/Documentation/md.txt index 1da9d1b1793f..4edd39ec7db9 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -164,15 +164,19 @@ All md devices contain: raid_disks a text file with a simple number indicating the number of devices in a fully functional array. If this is not yet known, the file - will be empty. If an array is being resized (not currently - possible) this will contain the larger of the old and new sizes. - Some raid level (RAID1) allow this value to be set while the - array is active. This will reconfigure the array. Otherwise - it can only be set while assembling an array. + will be empty. If an array is being resized this will contain + the new number of devices. + Some raid levels allow this value to be set while the array is + active. This will reconfigure the array. Otherwise it can only + be set while assembling an array. + A change to this attribute will not be permitted if it would + reduce the size of the array. To reduce the number of drives + in an e.g. raid5, the array size must first be reduced by + setting the 'array_size' attribute. chunk_size - This is the size if bytes for 'chunks' and is only relevant to - raid levels that involve striping (1,4,5,6,10). The address space + This is the size in bytes for 'chunks' and is only relevant to + raid levels that involve striping (0,4,5,6,10). The address space of the array is conceptually divided into chunks and consecutive chunks are striped onto neighbouring devices. The size should be at least PAGE_SIZE (4k) and should be a power @@ -183,6 +187,20 @@ All md devices contain: simply a number that is interpretted differently by different levels. It can be written while assembling an array. + array_size + This can be used to artificially constrain the available space in + the array to be less than is actually available on the combined + devices. Writing a number (in Kilobytes) which is less than + the available size will set the size. Any reconfiguration of the + array (e.g. adding devices) will not cause the size to change. + Writing the word 'default' will cause the effective size of the + array to be whatever size is actually available based on + 'level', 'chunk_size' and 'component_size'. + + This can be used to reduce the size of the array before reducing + the number of devices in a raid4/5/6, or to support external + metadata formats which mandate such clipping. + reshape_position This is either "none" or a sector number within the devices of the array where "reshape" is up to. If this is set, the three @@ -207,6 +225,11 @@ All md devices contain: about the array. It can be 0.90 (traditional format), 1.0, 1.1, 1.2 (newer format in varying locations) or "none" indicating that the kernel isn't managing metadata at all. + Alternately it can be "external:" followed by a string which + is set by user-space. This indicates that metadata is managed + by a user-space program. Any device failure or other event that + requires a metadata update will cause array activity to be + suspended until the event is acknowledged. resync_start The point at which resync should start. If no resync is needed, diff --git a/Documentation/networking/vxge.txt b/Documentation/networking/vxge.txt new file mode 100644 index 000000000000..d2e2997e6fa0 --- /dev/null +++ b/Documentation/networking/vxge.txt @@ -0,0 +1,100 @@ +Neterion's (Formerly S2io) X3100 Series 10GbE PCIe Server Adapter Linux driver +============================================================================== + +Contents +-------- + +1) Introduction +2) Features supported +3) Configurable driver parameters +4) Troubleshooting + +1) Introduction: +---------------- +This Linux driver supports all Neterion's X3100 series 10 GbE PCIe I/O +Virtualized Server adapters. +The X3100 series supports four modes of operation, configurable via +firmware - + Single function mode + Multi function mode + SRIOV mode + MRIOV mode +The functions share a 10GbE link and the pci-e bus, but hardly anything else +inside the ASIC. Features like independent hw reset, statistics, bandwidth/ +priority allocation and guarantees, GRO, TSO, interrupt moderation etc are +supported independently on each function. + +(See below for a complete list of features supported for both IPv4 and IPv6) + +2) Features supported: +---------------------- + +i) Single function mode (up to 17 queues) + +ii) Multi function mode (up to 17 functions) + +iii) PCI-SIG's I/O Virtualization + - Single Root mode: v1.0 (up to 17 functions) + - Multi-Root mode: v1.0 (up to 17 functions) + +iv) Jumbo frames + X3100 Series supports MTU up to 9600 bytes, modifiable using + ifconfig command. + +v) Offloads supported: (Enabled by default) + Checksum offload (TCP/UDP/IP) on transmit and receive paths + TCP Segmentation Offload (TSO) on transmit path + Generic Receive Offload (GRO) on receive path + +vi) MSI-X: (Enabled by default) + Resulting in noticeable performance improvement (up to 7% on certain + platforms). + +vii) NAPI: (Enabled by default) + For better Rx interrupt moderation. + +viii)RTH (Receive Traffic Hash): (Enabled by default) + Receive side steering for better scaling. + +ix) Statistics + Comprehensive MAC-level and software statistics displayed using + "ethtool -S" option. + +x) Multiple hardware queues: (Enabled by default) + Up to 17 hardware based transmit and receive data channels, with + multiple steering options (transmit multiqueue enabled by default). + +3) Configurable driver parameters: +---------------------------------- + +i) max_config_dev + Specifies maximum device functions to be enabled. + Valid range: 1-8 + +ii) max_config_port + Specifies number of ports to be enabled. + Valid range: 1,2 + Default: 1 + +iii)max_config_vpath + Specifies maximum VPATH(s) configured for each device function. + Valid range: 1-17 + +iv) vlan_tag_strip + Enables/disables vlan tag stripping from all received tagged frames that + are not replicated at the internal L2 switch. + Valid range: 0,1 (disabled, enabled respectively) + Default: 1 + +v) addr_learn_en + Enable learning the mac address of the guest OS interface in + virtualization environment. + Valid range: 0,1 (disabled, enabled respectively) + Default: 0 + +4) Troubleshooting: +------------------- + +To resolve an issue with the source code or X3100 series adapter, please collect +the statistics, register dumps using ethool, relevant logs and email them to +support@neterion.com. diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt index 6c238f59b2a9..249db3a15d15 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt @@ -1,6 +1,6 @@ * Uploaded QE firmware - If a new firwmare has been uploaded to the QE (usually by the + If a new firmware has been uploaded to the QE (usually by the boot loader), then a 'firmware' child node should be added to the QE node. This node provides information on the uploaded firmware that device drivers may need. diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt index 3ef339f491e0..5ba4d3fc625a 100644 --- a/Documentation/scheduler/sched-rt-group.txt +++ b/Documentation/scheduler/sched-rt-group.txt @@ -126,7 +126,7 @@ This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_u to control the CPU time reserved for each control group instead. For more information on working with control groups, you should read -Documentation/cgroups.txt as well. +Documentation/cgroups/cgroups.txt as well. Group settings are checked against the following limits in order to keep the configuration schedulable: diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt new file mode 100644 index 000000000000..ebc50f808ea4 --- /dev/null +++ b/Documentation/slow-work.txt @@ -0,0 +1,174 @@ + ==================================== + SLOW WORK ITEM EXECUTION THREAD POOL + ==================================== + +By: David Howells <dhowells@redhat.com> + +The slow work item execution thread pool is a pool of threads for performing +things that take a relatively long time, such as making mkdir calls. +Typically, when processing something, these items will spend a lot of time +blocking a thread on I/O, thus making that thread unavailable for doing other +work. + +The standard workqueue model is unsuitable for this class of work item as that +limits the owner to a single thread or a single thread per CPU. For some +tasks, however, more threads - or fewer - are required. + +There is just one pool per system. It contains no threads unless something +wants to use it - and that something must register its interest first. When +the pool is active, the number of threads it contains is dynamic, varying +between a maximum and minimum setting, depending on the load. + + +==================== +CLASSES OF WORK ITEM +==================== + +This pool support two classes of work items: + + (*) Slow work items. + + (*) Very slow work items. + +The former are expected to finish much quicker than the latter. + +An operation of the very slow class may do a batch combination of several +lookups, mkdirs, and a create for instance. + +An operation of the ordinarily slow class may, for example, write stuff or +expand files, provided the time taken to do so isn't too long. + +Operations of both types may sleep during execution, thus tying up the thread +loaned to it. + + +THREAD-TO-CLASS ALLOCATION +-------------------------- + +Not all the threads in the pool are available to work on very slow work items. +The number will be between one and one fewer than the number of active threads. +This is configurable (see the "Pool Configuration" section). + +All the threads are available to work on ordinarily slow work items, but a +percentage of the threads will prefer to work on very slow work items. + +The configuration ensures that at least one thread will be available to work on +very slow work items, and at least one thread will be available that won't work +on very slow work items at all. + + +===================== +USING SLOW WORK ITEMS +===================== + +Firstly, a module or subsystem wanting to make use of slow work items must +register its interest: + + int ret = slow_work_register_user(); + +This will return 0 if successful, or a -ve error upon failure. + + +Slow work items may then be set up by: + + (1) Declaring a slow_work struct type variable: + + #include <linux/slow-work.h> + + struct slow_work myitem; + + (2) Declaring the operations to be used for this item: + + struct slow_work_ops myitem_ops = { + .get_ref = myitem_get_ref, + .put_ref = myitem_put_ref, + .execute = myitem_execute, + }; + + [*] For a description of the ops, see section "Item Operations". + + (3) Initialising the item: + + slow_work_init(&myitem, &myitem_ops); + + or: + + vslow_work_init(&myitem, &myitem_ops); + + depending on its class. + +A suitably set up work item can then be enqueued for processing: + + int ret = slow_work_enqueue(&myitem); + +This will return a -ve error if the thread pool is unable to gain a reference +on the item, 0 otherwise. + + +The items are reference counted, so there ought to be no need for a flush +operation. When all a module's slow work items have been processed, and the +module has no further interest in the facility, it should unregister its +interest: + + slow_work_unregister_user(); + + +=============== +ITEM OPERATIONS +=============== + +Each work item requires a table of operations of type struct slow_work_ops. +All members are required: + + (*) Get a reference on an item: + + int (*get_ref)(struct slow_work *work); + + This allows the thread pool to attempt to pin an item by getting a + reference on it. This function should return 0 if the reference was + granted, or a -ve error otherwise. If an error is returned, + slow_work_enqueue() will fail. + + The reference is held whilst the item is queued and whilst it is being + executed. The item may then be requeued with the same reference held, or + the reference will be released. + + (*) Release a reference on an item: + + void (*put_ref)(struct slow_work *work); + + This allows the thread pool to unpin an item by releasing the reference on + it. The thread pool will not touch the item again once this has been + called. + + (*) Execute an item: + + void (*execute)(struct slow_work *work); + + This should perform the work required of the item. It may sleep, it may + perform disk I/O and it may wait for locks. + + +================== +POOL CONFIGURATION +================== + +The slow-work thread pool has a number of configurables: + + (*) /proc/sys/kernel/slow-work/min-threads + + The minimum number of threads that should be in the pool whilst it is in + use. This may be anywhere between 2 and max-threads. + + (*) /proc/sys/kernel/slow-work/max-threads + + The maximum number of threads that should in the pool. This may be + anywhere between min-threads and 255 or NR_CPUS * 2, whichever is greater. + + (*) /proc/sys/kernel/slow-work/vslow-percentage + + The percentage of active threads in the pool that may be used to execute + very slow work items. This may be between 1 and 99. The resultant number + is bounded to between 1 and one fewer than the number of active threads. + This ensures there is always at least one thread that can process very + slow work items, and always at least one thread that won't. diff --git a/Documentation/sysctl/00-INDEX b/Documentation/sysctl/00-INDEX index a20a9066dc4c..1286f455992f 100644 --- a/Documentation/sysctl/00-INDEX +++ b/Documentation/sysctl/00-INDEX @@ -10,6 +10,8 @@ fs.txt - documentation for /proc/sys/fs/*. kernel.txt - documentation for /proc/sys/kernel/*. +net.txt + - documentation for /proc/sys/net/*. sunrpc.txt - documentation for /proc/sys/sunrpc/*. vm.txt diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index f99254327ae5..1458448436cc 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -1,5 +1,6 @@ Documentation for /proc/sys/fs/* kernel version 2.2.10 (c) 1998, 1999, Rik van Riel <riel@nl.linux.org> + (c) 2009, Shen Feng<shen@cn.fujitsu.com> For general info and legal blurb, please look in README. @@ -14,7 +15,12 @@ kernel. Since some of the files _can_ be used to screw up your system, it is advisable to read both documentation and source before actually making adjustments. +1. /proc/sys/fs +---------------------------------------------------------- + Currently, these files are in /proc/sys/fs: +- aio-max-nr +- aio-nr - dentry-state - dquot-max - dquot-nr @@ -30,8 +36,15 @@ Currently, these files are in /proc/sys/fs: - super-max - super-nr -Documentation for the files in /proc/sys/fs/binfmt_misc is -in Documentation/binfmt_misc.txt. +============================================================== + +aio-nr & aio-max-nr: + +aio-nr is the running total of the number of events specified on the +io_setup system call for all currently active aio contexts. If aio-nr +reaches aio-max-nr then io_setup will fail with EAGAIN. Note that +raising aio-max-nr does not result in the pre-allocation or re-sizing +of any kernel data structures. ============================================================== @@ -178,3 +191,60 @@ requests. aio-max-nr allows you to change the maximum value aio-nr can grow to. ============================================================== + + +2. /proc/sys/fs/binfmt_misc +---------------------------------------------------------- + +Documentation for the files in /proc/sys/fs/binfmt_misc is +in Documentation/binfmt_misc.txt. + + +3. /proc/sys/fs/mqueue - POSIX message queues filesystem +---------------------------------------------------------- + +The "mqueue" filesystem provides the necessary kernel features to enable the +creation of a user space library that implements the POSIX message queues +API (as noted by the MSG tag in the POSIX 1003.1-2001 version of the System +Interfaces specification.) + +The "mqueue" filesystem contains values for determining/setting the amount of +resources used by the file system. + +/proc/sys/fs/mqueue/queues_max is a read/write file for setting/getting the +maximum number of message queues allowed on the system. + +/proc/sys/fs/mqueue/msg_max is a read/write file for setting/getting the +maximum number of messages in a queue value. In fact it is the limiting value +for another (user) limit which is set in mq_open invocation. This attribute of +a queue must be less or equal then msg_max. + +/proc/sys/fs/mqueue/msgsize_max is a read/write file for setting/getting the +maximum message size value (it is every message queue's attribute set during +its creation). + + +4. /proc/sys/fs/epoll - Configuration options for the epoll interface +-------------------------------------------------------- + +This directory contains configuration options for the epoll(7) interface. + +max_user_instances +------------------ + +This is the maximum number of epoll file descriptors that a single user can +have open at a given time. The default value is 128, and should be enough +for normal users. + +max_user_watches +---------------- + +Every epoll file descriptor can store a number of files to be monitored +for event readiness. Each one of these monitored files constitutes a "watch". +This configuration option sets the maximum number of "watches" that are +allowed for each user. +Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes +on a 64bit one. +The current default value for max_user_watches is the 1/32 of the available +low memory, divided for the "watch" cost in bytes. + diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index a4ccdd1981cf..f11ca7979fa6 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -1,5 +1,6 @@ Documentation for /proc/sys/kernel/* kernel version 2.2.10 (c) 1998, 1999, Rik van Riel <riel@nl.linux.org> + (c) 2009, Shen Feng<shen@cn.fujitsu.com> For general info and legal blurb, please look in README. @@ -18,6 +19,7 @@ Currently, these files might (depending on your configuration) show up in /proc/sys/kernel: - acpi_video_flags - acct +- auto_msgmni - core_pattern - core_uses_pid - ctrl-alt-del @@ -33,6 +35,7 @@ show up in /proc/sys/kernel: - msgmax - msgmnb - msgmni +- nmi_watchdog - osrelease - ostype - overflowgid @@ -40,6 +43,7 @@ show up in /proc/sys/kernel: - panic - pid_max - powersave-nap [ PPC only ] +- panic_on_unrecovered_nmi - printk - randomize_va_space - real-root-dev ==> Documentation/initrd.txt @@ -55,6 +59,7 @@ show up in /proc/sys/kernel: - sysrq ==> Documentation/sysrq.txt - tainted - threads-max +- unknown_nmi_panic - version ============================================================== @@ -381,3 +386,51 @@ can be ORed together: 512 - A kernel warning has occurred. 1024 - A module from drivers/staging was loaded. +============================================================== + +auto_msgmni: + +Enables/Disables automatic recomputing of msgmni upon memory add/remove or +upon ipc namespace creation/removal (see the msgmni description above). +Echoing "1" into this file enables msgmni automatic recomputing. +Echoing "0" turns it off. +auto_msgmni default value is 1. + +============================================================== + +nmi_watchdog: + +Enables/Disables the NMI watchdog on x86 systems. When the value is non-zero +the NMI watchdog is enabled and will continuously test all online cpus to +determine whether or not they are still functioning properly. Currently, +passing "nmi_watchdog=" parameter at boot time is required for this function +to work. + +If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the +NMI watchdog shares registers with oprofile. By disabling the NMI watchdog, +oprofile may have more registers to utilize. + +============================================================== + +unknown_nmi_panic: + +The value in this file affects behavior of handling NMI. When the value is +non-zero, unknown NMI is trapped and then panic occurs. At that time, kernel +debugging information is displayed on console. + +NMI switch that most IA32 servers have fires unknown NMI up, for example. +If a system hangs up, try pressing the NMI switch. + +============================================================== + +panic_on_unrecovered_nmi: + +The default Linux behaviour on an NMI of either memory or unknown is to continue +operation. For many environments such as scientific computing it is preferable +that the box is taken out and the error dealt with than an uncorrected +parity/ECC error get propogated. + +A small number of systems do generate NMI's for bizarre random reasons such as +power management so the default is off. That sysctl works like the existing +panic controls already in that directory. + diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt new file mode 100644 index 000000000000..a34d55b65441 --- /dev/null +++ b/Documentation/sysctl/net.txt @@ -0,0 +1,175 @@ +Documentation for /proc/sys/net/* kernel version 2.4.0-test11-pre4 + (c) 1999 Terrehon Bowden <terrehon@pacbell.net> + Bodo Bauer <bb@ricochet.net> + (c) 2000 Jorge Nerin <comandante@zaralinux.com> + (c) 2009 Shen Feng <shen@cn.fujitsu.com> + +For general info and legal blurb, please look in README. + +============================================================== + +This file contains the documentation for the sysctl files in +/proc/sys/net and is valid for Linux kernel version 2.4.0-test11-pre4. + +The interface to the networking parts of the kernel is located in +/proc/sys/net. The following table shows all possible subdirectories.You may +see only some of them, depending on your kernel's configuration. + + +Table : Subdirectories in /proc/sys/net +.............................................................................. + Directory Content Directory Content + core General parameter appletalk Appletalk protocol + unix Unix domain sockets netrom NET/ROM + 802 E802 protocol ax25 AX25 + ethernet Ethernet protocol rose X.25 PLP layer + ipv4 IP version 4 x25 X.25 protocol + ipx IPX token-ring IBM token ring + bridge Bridging decnet DEC net + ipv6 IP version 6 +.............................................................................. + +1. /proc/sys/net/core - Network core options +------------------------------------------------------- + +rmem_default +------------ + +The default setting of the socket receive buffer in bytes. + +rmem_max +-------- + +The maximum receive socket buffer size in bytes. + +wmem_default +------------ + +The default setting (in bytes) of the socket send buffer. + +wmem_max +-------- + +The maximum send socket buffer size in bytes. + +message_burst and message_cost +------------------------------ + +These parameters are used to limit the warning messages written to the kernel +log from the networking code. They enforce a rate limit to make a +denial-of-service attack impossible. A higher message_cost factor, results in +fewer messages that will be written. Message_burst controls when messages will +be dropped. The default settings limit warning messages to one every five +seconds. + +warnings +-------- + +This controls console messages from the networking stack that can occur because +of problems on the network like duplicate address or bad checksums. Normally, +this should be enabled, but if the problem persists the messages can be +disabled. + +netdev_budget +------------- + +Maximum number of packets taken from all interfaces in one polling cycle (NAPI +poll). In one polling cycle interfaces which are registered to polling are +probed in a round-robin manner. The limit of packets in one such probe can be +set per-device via sysfs class/net/<device>/weight . + +netdev_max_backlog +------------------ + +Maximum number of packets, queued on the INPUT side, when the interface +receives packets faster than kernel can process them. + +optmem_max +---------- + +Maximum ancillary buffer size allowed per socket. Ancillary data is a sequence +of struct cmsghdr structures with appended data. + +2. /proc/sys/net/unix - Parameters for Unix domain sockets +------------------------------------------------------- + +There is only one file in this directory. +unix_dgram_qlen limits the max number of datagrams queued in Unix domain +socket's buffer. It will not take effect unless PF_UNIX flag is spicified. + + +3. /proc/sys/net/ipv4 - IPV4 settings +------------------------------------------------------- +Please see: Documentation/networking/ip-sysctl.txt and ipvs-sysctl.txt for +descriptions of these entries. + + +4. Appletalk +------------------------------------------------------- + +The /proc/sys/net/appletalk directory holds the Appletalk configuration data +when Appletalk is loaded. The configurable parameters are: + +aarp-expiry-time +---------------- + +The amount of time we keep an ARP entry before expiring it. Used to age out +old hosts. + +aarp-resolve-time +----------------- + +The amount of time we will spend trying to resolve an Appletalk address. + +aarp-retransmit-limit +--------------------- + +The number of times we will retransmit a query before giving up. + +aarp-tick-time +-------------- + +Controls the rate at which expires are checked. + +The directory /proc/net/appletalk holds the list of active Appletalk sockets +on a machine. + +The fields indicate the DDP type, the local address (in network:node format) +the remote address, the size of the transmit pending queue, the size of the +received queue (bytes waiting for applications to read) the state and the uid +owning the socket. + +/proc/net/atalk_iface lists all the interfaces configured for appletalk.It +shows the name of the interface, its Appletalk address, the network range on +that address (or network number for phase 1 networks), and the status of the +interface. + +/proc/net/atalk_route lists each known network route. It lists the target +(network) that the route leads to, the router (may be directly connected), the +route flags, and the device the route is using. + + +5. IPX +------------------------------------------------------- + +The IPX protocol has no tunable values in proc/sys/net. + +The IPX protocol does, however, provide proc/net/ipx. This lists each IPX +socket giving the local and remote addresses in Novell format (that is +network:node:port). In accordance with the strange Novell tradition, +everything but the port is in hex. Not_Connected is displayed for sockets that +are not tied to a specific remote address. The Tx and Rx queue sizes indicate +the number of bytes pending for transmission and reception. The state +indicates the state the socket is in and the uid is the owning uid of the +socket. + +The /proc/net/ipx_interface file lists all IPX interfaces. For each interface +it gives the network number, the node number, and indicates if the network is +the primary network. It also indicates which device it is bound to (or +Internal for internal networks) and the Frame Type if appropriate. Linux +supports 802.3, 802.2, 802.2 SNAP and DIX (Blue Book) ethernet framing for +IPX. + +The /proc/net/ipx_route table holds a list of IPX routes. For each route it +gives the destination network, the router node (or Directly) and the network +address of the router (or Connected) for internal networks. diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt index afa2946892da..cf42b820ff9d 100644 --- a/Documentation/sysrq.txt +++ b/Documentation/sysrq.txt @@ -115,6 +115,8 @@ On all - write a character to /proc/sysrq-trigger. e.g.: 'x' - Used by xmon interface on ppc/powerpc platforms. +'z' - Dump the ftrace buffer + '0'-'9' - Sets the console log level, controlling which kernel messages will be printed to your console. ('0', for example would make it so that only emergency messages like PANICs or OOPSes would diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt index 6f0a044f5b5e..c0e1ceed75a4 100644 --- a/Documentation/tracepoints.txt +++ b/Documentation/tracepoints.txt @@ -45,8 +45,8 @@ In include/trace/subsys.h : #include <linux/tracepoint.h> DECLARE_TRACE(subsys_eventname, - TPPROTO(int firstarg, struct task_struct *p), - TPARGS(firstarg, p)); + TP_PROTO(int firstarg, struct task_struct *p), + TP_ARGS(firstarg, p)); In subsys/file.c (where the tracing statement must be added) : @@ -66,10 +66,10 @@ Where : - subsys is the name of your subsystem. - eventname is the name of the event to trace. -- TPPROTO(int firstarg, struct task_struct *p) is the prototype of the +- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the function called by this tracepoint. -- TPARGS(firstarg, p) are the parameters names, same as found in the +- TP_ARGS(firstarg, p) are the parameters names, same as found in the prototype. Connecting a function (probe) to a tracepoint is done by providing a @@ -103,13 +103,14 @@ used to export the defined tracepoints. * Probe / tracepoint example -See the example provided in samples/tracepoints/src +See the example provided in samples/tracepoints -Compile them with your kernel. +Compile them with your kernel. They are built during 'make' (not +'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m. Run, as root : -modprobe tracepoint-example (insmod order is not important) -modprobe tracepoint-probe-example -cat /proc/tracepoint-example (returns an expected error) -rmmod tracepoint-example tracepoint-probe-example +modprobe tracepoint-sample (insmod order is not important) +modprobe tracepoint-probe-sample +cat /proc/tracepoint-sample (returns an expected error) +rmmod tracepoint-sample tracepoint-probe-sample dmesg diff --git a/Documentation/vm/kmemtrace.txt b/Documentation/vm/kmemtrace.txt new file mode 100644 index 000000000000..a956d9b7f943 --- /dev/null +++ b/Documentation/vm/kmemtrace.txt @@ -0,0 +1,126 @@ + kmemtrace - Kernel Memory Tracer + + by Eduard - Gabriel Munteanu + <eduard.munteanu@linux360.ro> + +I. Introduction +=============== + +kmemtrace helps kernel developers figure out two things: +1) how different allocators (SLAB, SLUB etc.) perform +2) how kernel code allocates memory and how much + +To do this, we trace every allocation and export information to the userspace +through the relay interface. We export things such as the number of requested +bytes, the number of bytes actually allocated (i.e. including internal +fragmentation), whether this is a slab allocation or a plain kmalloc() and so +on. + +The actual analysis is performed by a userspace tool (see section III for +details on where to get it from). It logs the data exported by the kernel, +processes it and (as of writing this) can provide the following information: +- the total amount of memory allocated and fragmentation per call-site +- the amount of memory allocated and fragmentation per allocation +- total memory allocated and fragmentation in the collected dataset +- number of cross-CPU allocation and frees (makes sense in NUMA environments) + +Moreover, it can potentially find inconsistent and erroneous behavior in +kernel code, such as using slab free functions on kmalloc'ed memory or +allocating less memory than requested (but not truly failed allocations). + +kmemtrace also makes provisions for tracing on some arch and analysing the +data on another. + +II. Design and goals +==================== + +kmemtrace was designed to handle rather large amounts of data. Thus, it uses +the relay interface to export whatever is logged to userspace, which then +stores it. Analysis and reporting is done asynchronously, that is, after the +data is collected and stored. By design, it allows one to log and analyse +on different machines and different arches. + +As of writing this, the ABI is not considered stable, though it might not +change much. However, no guarantees are made about compatibility yet. When +deemed stable, the ABI should still allow easy extension while maintaining +backward compatibility. This is described further in Documentation/ABI. + +Summary of design goals: + - allow logging and analysis to be done across different machines + - be fast and anticipate usage in high-load environments (*) + - be reasonably extensible + - make it possible for GNU/Linux distributions to have kmemtrace + included in their repositories + +(*) - one of the reasons Pekka Enberg's original userspace data analysis + tool's code was rewritten from Perl to C (although this is more than a + simple conversion) + + +III. Quick usage guide +====================== + +1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable +CONFIG_KMEMTRACE). + +2) Get the userspace tool and build it: +$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository +$ cd kmemtrace-user/ +$ ./autogen.sh +$ ./configure +$ make + +3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the +'single' runlevel (so that relay buffers don't fill up easily), and run +kmemtrace: +# '$' does not mean user, but root here. +$ mount -t debugfs none /sys/kernel/debug +$ mount -t proc none /proc +$ cd path/to/kmemtrace-user/ +$ ./kmemtraced +Wait a bit, then stop it with CTRL+C. +$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't + # overrun, should + # be zero. +$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to + check its correctness] +$ ./kmemtrace-report + +Now you should have a nice and short summary of how the allocator performs. + +IV. FAQ and known issues +======================== + +Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix +this? Should I worry? +A: If it's non-zero, this affects kmemtrace's accuracy, depending on how +large the number is. You can fix it by supplying a higher +'kmemtrace.subbufs=N' kernel parameter. +--- + +Q: kmemtrace_check reports errors, how do I fix this? Should I worry? +A: This is a bug and should be reported. It can occur for a variety of +reasons: + - possible bugs in relay code + - possible misuse of relay by kmemtrace + - timestamps being collected unorderly +Or you may fix it yourself and send us a patch. +--- + +Q: kmemtrace_report shows many errors, how do I fix this? Should I worry? +A: This is a known issue and I'm working on it. These might be true errors +in kernel code, which may have inconsistent behavior (e.g. allocating memory +with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed +out this behavior may work with SLAB, but may fail with other allocators. + +It may also be due to lack of tracing in some unusual allocator functions. + +We don't want bug reports regarding this issue yet. +--- + +V. See also +=========== + +Documentation/kernel-parameters.txt +Documentation/ABI/testing/debugfs-kmemtrace + diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index 6aaaeb38730c..be45dbb9d7f2 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -8,7 +8,8 @@ The current memory policy support was added to Linux 2.6 around May 2004. This document attempts to describe the concepts and APIs of the 2.6 memory policy support. -Memory policies should not be confused with cpusets (Documentation/cpusets.txt) +Memory policies should not be confused with cpusets +(Documentation/cgroups/cpusets.txt) which is an administrative mechanism for restricting the nodes from which memory may be allocated by a set of processes. Memory policies are a programming interface that a NUMA-aware application can take advantage of. When diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration index d5fdfd34bbaf..6513fe2d90b8 100644 --- a/Documentation/vm/page_migration +++ b/Documentation/vm/page_migration @@ -37,7 +37,8 @@ locations. Larger installations usually partition the system using cpusets into sections of nodes. Paul Jackson has equipped cpusets with the ability to -move pages when a task is moved to another cpuset (See ../cpusets.txt). +move pages when a task is moved to another cpuset (See +Documentation/cgroups/cpusets.txt). Cpusets allows the automation of process locality. If a task is moved to a new cpuset then also all its pages are moved with it so that the performance of the process does not sink dramatically. Also the pages diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets index 33bb56655991..0f11d9becb0b 100644 --- a/Documentation/x86/x86_64/fake-numa-for-cpusets +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets @@ -7,7 +7,8 @@ you can create fake NUMA nodes that represent contiguous chunks of memory and assign them to cpusets and their attached tasks. This is a way of limiting the amount of system memory that are available to a certain class of tasks. -For more information on the features of cpusets, see Documentation/cpusets.txt. +For more information on the features of cpusets, see +Documentation/cgroups/cpusets.txt. There are a number of different configurations you can use for your needs. For more information on the numa=fake command line option and its various ways of configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt. @@ -32,7 +33,7 @@ A machine may be split as follows with "numa=fake=4*512," as reported by dmesg: On node 3 totalpages: 131072 Now following the instructions for mounting the cpusets filesystem from -Documentation/cpusets.txt, you can assign fake nodes (i.e. contiguous memory +Documentation/cgroups/cpusets.txt, you can assign fake nodes (i.e. contiguous memory address spaces) to individual cpusets: [root@xroads /]# mkdir exampleset |