summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-class-mtd10
-rw-r--r--Documentation/devicetree/bindings/mtd/m25p80.txt13
-rw-r--r--Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/sunxi-nand.txt2
4 files changed, 20 insertions, 7 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index 76ee192f80a0..3b5c3bca9186 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -222,3 +222,13 @@ Description:
The number of blocks that are marked as reserved, if any, in
this partition. These are typically used to store the in-flash
bad block table (BBT).
+
+What: /sys/class/mtd/mtdX/offset
+Date: March 2015
+KernelVersion: 4.1
+Contact: linux-mtd@lists.infradead.org
+Description:
+ For a partition, the offset of that partition from the start
+ of the master device in bytes. This attribute is absent on
+ main devices, so it can be used to distinguish between
+ partitions and devices that aren't partitions.
diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/m25p80.txt
index 4611aa83531b..f20b111b502a 100644
--- a/Documentation/devicetree/bindings/mtd/m25p80.txt
+++ b/Documentation/devicetree/bindings/mtd/m25p80.txt
@@ -3,10 +3,13 @@
Required properties:
- #address-cells, #size-cells : Must be present if the device has sub-nodes
representing partitions.
-- compatible : Should be the manufacturer and the name of the chip. Bear in mind
- the DT binding is not Linux-only, but in case of Linux, see the
- "spi_nor_ids" table in drivers/mtd/spi-nor/spi-nor.c for the list
- of supported chips.
+- compatible : May include a device-specific string consisting of the
+ manufacturer and name of the chip. Bear in mind the DT binding
+ is not Linux-only, but in case of Linux, see the "m25p_ids"
+ table in drivers/mtd/devices/m25p80.c for the list of supported
+ chips.
+ Must also include "nor-jedec" for any SPI NOR flash that can be
+ identified by the JEDEC READ ID opcode (0x9F).
- reg : Chip-Select number
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
@@ -22,7 +25,7 @@ Example:
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,m25p80";
+ compatible = "spansion,m25p80", "nor-jedec";
reg = <0>;
spi-max-frequency = <40000000>;
m25p,fast-read;
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index de8b517a5521..4f833e3c4f51 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -14,7 +14,7 @@ Optional properties:
- marvell,nand-enable-arbiter: Set to enable the bus arbiter
- marvell,nand-keep-config: Set to keep the NAND controller config as set
by the bootloader
- - num-cs: Number of chipselect lines to usw
+ - num-cs: Number of chipselect lines to use
- nand-on-flash-bbt: boolean to enable on flash bbt option if
not present false
- nand-ecc-strength: number of bits to correct per ECC step
diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
index 0273adb8638c..086d6f44c4b9 100644
--- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
@@ -21,7 +21,7 @@ Optional properties:
- nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft",
"soft_bch" or "none")
-see Documentation/devicetree/mtd/nand.txt for generic bindings.
+see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
Examples: