summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/clock/exynos3250-clock.txt10
-rw-r--r--Documentation/devicetree/bindings/clock/gpio-gate-clock.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/maxim,max77686.txt16
-rw-r--r--Documentation/devicetree/bindings/clock/maxim,max77802.txt44
-rw-r--r--Documentation/devicetree/bindings/clock/pxa-clock.txt16
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/sunxi.txt4
-rw-r--r--Documentation/kernel-parameters.txt14
9 files changed, 117 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
index aadc9c59e2d1..f57d9dd9ea85 100644
--- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
@@ -7,6 +7,8 @@ Required Properties:
- compatible: should be one of the following.
- "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+ - "samsung,exynos3250-cmu-dmc" - controller compatible with
+ Exynos3250 SoC for Dynamic Memory Controller domain.
- reg: physical base address of the controller and length of memory mapped
region.
@@ -20,7 +22,7 @@ All available clocks are defined as preprocessor macros in
dt-bindings/clock/exynos3250.h header and can be used in device
tree sources.
-Example 1: An example of a clock controller node is listed below.
+Example 1: Examples of clock controller nodes are listed below.
cmu: clock-controller@10030000 {
compatible = "samsung,exynos3250-cmu";
@@ -28,6 +30,12 @@ Example 1: An example of a clock controller node is listed below.
#clock-cells = <1>;
};
+ cmu_dmc: clock-controller@105C0000 {
+ compatible = "samsung,exynos3250-cmu-dmc";
+ reg = <0x105C0000 0x2000>;
+ #clock-cells = <1>;
+ };
+
Example 2: UART controller node that consumes the clock generated by the clock
controller. Refer to the standard clock bindings for information
about 'clocks' and 'clock-names' property.
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
new file mode 100644
index 000000000000..d3379ff9b84b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
@@ -0,0 +1,21 @@
+Binding for simple gpio gated clock.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-gate-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- enable-gpios : GPIO reference for enabling and disabling the clock.
+
+Optional properties:
+- clocks: Maximum of one parent clock is supported.
+
+Example:
+ clock {
+ compatible = "gpio-gate-clock";
+ clocks = <&parentclk>;
+ #clock-cells = <0>;
+ enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
index 96ce71bbd745..9c40739a661a 100644
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -9,13 +9,21 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled
Following properties should be presend in main device node of the MFD chip.
Required properties:
-- #clock-cells: simple one-cell clock specifier format is used, where the
- only cell is used as an index of the clock inside the provider. Following
- indices are allowed:
+
+- #clock-cells: from common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
- 0: 32khz_ap clock,
- 1: 32khz_cp clock,
- 2: 32khz_pmic clock.
+Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h
+header and can be used in device tree sources.
+
Example: Node of the MFD chip
max77686: max77686@09 {
@@ -34,5 +42,5 @@ Example: Clock consumer node
compatible = "bar,foo";
/* ... */
clock-names = "my-clock";
- clocks = <&max77686 2>;
+ clocks = <&max77686 MAX77686_CLK_PMIC>;
};
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
new file mode 100644
index 000000000000..c6dc7835f06c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
@@ -0,0 +1,44 @@
+Binding for Maxim MAX77802 32k clock generator block
+
+This is a part of device tree bindings of MAX77802 multi-function device.
+More information can be found in bindings/mfd/max77802.txt file.
+
+The MAX77802 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Required properties:
+- #clock-cells: From common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+ - 0: 32khz_ap clock,
+ - 1: 32khz_cp clock.
+
+Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77802.h
+header and can be used in device tree sources.
+
+Example: Node of the MFD chip
+
+ max77802: max77802@09 {
+ compatible = "maxim,max77802";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ /* ... */
+ };
+
+Example: Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "my-clock";
+ clocks = <&max77802 MAX77802_CLK_32K_AP>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt
new file mode 100644
index 000000000000..4b4a9024bd99
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt
@@ -0,0 +1,16 @@
+* Clock bindings for Marvell PXA chips
+
+Required properties:
+- compatible: Should be "marvell,pxa-clocks"
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell (see include/.../pxa-clock.h).
+
+Examples:
+
+pxa2xx_clks: pxa2xx_clks@41300004 {
+ compatible = "marvell,pxa-clocks";
+ #clock-cells = <1>;
+ status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
index 8f1424f0fa43..a5f52238c80d 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -15,6 +15,7 @@ Required Properties:
- "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
- "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+ - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
- "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
- "renesas,cpg-mstp-clock" for generic MSTP gate clocks
- reg: Base address and length of the I/O mapped registers used by the MSTP
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
index 7b41c2fe54db..e6ad35b894f9 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -8,6 +8,7 @@ Required Properties:
- compatible: Must be one of
- "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+ - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
- "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
- reg: Base address and length of the memory resource used by the CPG
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index d3a5c3c6d677..ed116df9c3e7 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -46,7 +46,11 @@ Required properties:
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
+ "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
+ "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10
+ "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10
"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
+ "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
"allwinner,sun7i-a20-out-clk" - for the external output clocks
"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 04e9f5505faa..b62bdcb1eb39 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -605,11 +605,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
See Documentation/s390/CommonIO for details.
clk_ignore_unused
[CLK]
- Keep all clocks already enabled by bootloader on,
- even if no driver has claimed them. This is useful
- for debug and development, but should not be
- needed on a platform with proper driver support.
- For more information, see Documentation/clk.txt.
+ Prevents the clock framework from automatically gating
+ clocks that have not been explicitly enabled by a Linux
+ device driver but are enabled in hardware at reset or
+ by the bootloader/firmware. Note that this does not
+ force such clocks to be always-on nor does it reserve
+ those clocks in any way. This parameter is useful for
+ debug and development, but should not be needed on a
+ platform with proper driver support. For more
+ information, see Documentation/clk.txt.
clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
[Deprecated]