7 files changed, 64 insertions, 6 deletions
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index c0312cbd023d..2fb9a5457522 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -3383,7 +3383,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="2" valign="top" >omap</td>
+	<td valign="top" >omap</td>
 	<td valign="top" >Generic</td>
 	<td valign="top" >“zorder”</td>
 	<td valign="top" >RANGE</td>
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index 1fe2d7fd4108..5e38e1582f95 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -36,7 +36,7 @@ SunXi family
         + User Manual
           http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
 
-      - Allwinner A23
+      - Allwinner A23 (sun8i)
         + Datasheet
           http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
         + User Manual
@@ -55,7 +55,23 @@ SunXi family
         + User Manual
           http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
 
+      - Allwinner A33 (sun8i)
+        + Datasheet
+          http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
+        + User Manual
+          http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
+
+      - Allwinner H3 (sun8i)
+        + Datasheet
+          http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
+
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
         + Datasheet
 	  http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
+
+    * Octa ARM Cortex-A7 based SoCs
+      - Allwinner A83T
+        + Not Supported
+        + Datasheet
+          http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index 42941fdefb11..67da20539540 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -9,4 +9,6 @@ using one of the following compatible strings:
   allwinner,sun6i-a31
   allwinner,sun7i-a20
   allwinner,sun8i-a23
+  allwinner,sun8i-a33
+  allwinner,sun8i-h3
   allwinner,sun9i-a80
diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
index e75f0e549fff..971c3eedb1c7 100644
--- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
@@ -65,8 +65,10 @@ Optional properties:
 - edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt.
+  Port 0 is the input port connected to the IPU display interface,
+  port 1 is the output port connected to a panel.
 
 example:
 
@@ -75,9 +77,29 @@ display@di0 {
 	edid = [edid-data];
 	interface-pix-fmt = "rgb24";
 
-	port {
+	port@0 {
+		reg = <0>;
+
 		display_in: endpoint {
 			remote-endpoint = <&ipu_di0_disp0>;
 		};
 	};
+
+	port@1 {
+		reg = <1>;
+
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+panel {
+	...
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&display_out>;
+		};
+	};
 };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
index 938f8e1ba205..0db60470ebb6 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it.
 Required properties:
 - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
   is the IP revision of the specific EMIF instance.
+		  For am437x should be ti,emif-am4372.
 
 - phy-type	: <u32> indicating the DDR phy type. Following are the
   allowed values
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index e63b446d973c..13f888a02a3d 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -952,6 +952,14 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
 	mode) if this option is supported by $(AR).
 
+    ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS   Overrides the kbuild defaults
+
+	These variables are appended to the KBUILD_CPPFLAGS,
+	KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the
+	top-level Makefile has set any other flags. This provides a
+	means for an architecture to override the defaults.
+
+
 --- 6.2 Add prerequisites to archheaders:
 
 	The archheaders: rule is used to generate header files that
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index f732a8321e8a..8cc17ca71813 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -410,8 +410,17 @@ Documentation/usb/persist.txt.
 
 Q: Can I suspend-to-disk using a swap partition under LVM?
 
-A: No. You can suspend successfully, but you'll not be able to
-resume. uswsusp should be able to work with LVM. See suspend.sf.net.
+A: Yes and No.  You can suspend successfully, but the kernel will not be able
+to resume on its own.  You need an initramfs that can recognize the resume
+situation, activate the logical volume containing the swap volume (but not
+touch any filesystems!), and eventually call
+
+echo -n "$major:$minor" > /sys/power/resume
+
+where $major and $minor are the respective major and minor device numbers of
+the swap volume.
+
+uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
 
 Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
 compiled with the similar configuration files. Anyway I found that