summaryrefslogtreecommitdiff
path: root/arch/alpha/oprofile/op_model_ev5.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/alpha/oprofile/op_model_ev5.c')
-rw-r--r--arch/alpha/oprofile/op_model_ev5.c211
1 files changed, 211 insertions, 0 deletions
diff --git a/arch/alpha/oprofile/op_model_ev5.c b/arch/alpha/oprofile/op_model_ev5.c
new file mode 100644
index 000000000000..ceea6e1ad79a
--- /dev/null
+++ b/arch/alpha/oprofile/op_model_ev5.c
@@ -0,0 +1,211 @@
+/**
+ * @file arch/alpha/oprofile/op_model_ev5.c
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author Richard Henderson <rth@twiddle.net>
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+#include "op_impl.h"
+
+
+/* Compute all of the registers in preparation for enabling profiling.
+
+ The 21164 (EV5) and 21164PC (PCA65) vary in the bit placement and
+ meaning of the "CBOX" events. Given that we don't care about meaning
+ at this point, arrange for the difference in bit placement to be
+ handled by common code. */
+
+static void
+common_reg_setup(struct op_register_config *reg,
+ struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int cbox1_ofs, int cbox2_ofs)
+{
+ int i, ctl, reset, need_reset;
+
+ /* Select desired events. The event numbers are selected such
+ that they map directly into the event selection fields:
+
+ PCSEL0: 0, 1
+ PCSEL1: 24-39
+ CBOX1: 40-47
+ PCSEL2: 48-63
+ CBOX2: 64-71
+
+ There are two special cases, in that CYCLES can be measured
+ on PCSEL[02], and SCACHE_WRITE can be measured on CBOX[12].
+ These event numbers are canonicalizes to their first appearance. */
+
+ ctl = 0;
+ for (i = 0; i < 3; ++i) {
+ unsigned long event = ctr[i].event;
+ if (!ctr[i].enabled)
+ continue;
+
+ /* Remap the duplicate events, as described above. */
+ if (i == 2) {
+ if (event == 0)
+ event = 12+48;
+ else if (event == 2+41)
+ event = 4+65;
+ }
+
+ /* Convert the event numbers onto mux_select bit mask. */
+ if (event < 2)
+ ctl |= event << 31;
+ else if (event < 24)
+ /* error */;
+ else if (event < 40)
+ ctl |= (event - 24) << 4;
+ else if (event < 48)
+ ctl |= (event - 40) << cbox1_ofs | 15 << 4;
+ else if (event < 64)
+ ctl |= event - 48;
+ else if (event < 72)
+ ctl |= (event - 64) << cbox2_ofs | 15;
+ }
+ reg->mux_select = ctl;
+
+ /* Select processor mode. */
+ /* ??? Need to come up with some mechanism to trace only selected
+ processes. For now select from pal, kernel and user mode. */
+ ctl = 0;
+ ctl |= !sys->enable_pal << 9;
+ ctl |= !sys->enable_kernel << 8;
+ ctl |= !sys->enable_user << 30;
+ reg->proc_mode = ctl;
+
+ /* Select interrupt frequencies. Take the interrupt count selected
+ by the user, and map it onto one of the possible counter widths.
+ If the user value is in between, compute a value to which the
+ counter is reset at each interrupt. */
+
+ ctl = reset = need_reset = 0;
+ for (i = 0; i < 3; ++i) {
+ unsigned long max, hilo, count = ctr[i].count;
+ if (!ctr[i].enabled)
+ continue;
+
+ if (count <= 256)
+ count = 256, hilo = 3, max = 256;
+ else {
+ max = (i == 2 ? 16384 : 65536);
+ hilo = 2;
+ if (count > max)
+ count = max;
+ }
+ ctr[i].count = count;
+
+ ctl |= hilo << (8 - i*2);
+ reset |= (max - count) << (48 - 16*i);
+ if (count != max)
+ need_reset |= 1 << i;
+ }
+ reg->freq = ctl;
+ reg->reset_values = reset;
+ reg->need_reset = need_reset;
+}
+
+static void
+ev5_reg_setup(struct op_register_config *reg,
+ struct op_counter_config *ctr,
+ struct op_system_config *sys)
+{
+ common_reg_setup(reg, ctr, sys, 19, 22);
+}
+
+static void
+pca56_reg_setup(struct op_register_config *reg,
+ struct op_counter_config *ctr,
+ struct op_system_config *sys)
+{
+ common_reg_setup(reg, ctr, sys, 8, 11);
+}
+
+/* Program all of the registers in preparation for enabling profiling. */
+
+static void
+ev5_cpu_setup (void *x)
+{
+ struct op_register_config *reg = x;
+
+ wrperfmon(2, reg->mux_select);
+ wrperfmon(3, reg->proc_mode);
+ wrperfmon(4, reg->freq);
+ wrperfmon(6, reg->reset_values);
+}
+
+/* CTR is a counter for which the user has requested an interrupt count
+ in between one of the widths selectable in hardware. Reset the count
+ for CTR to the value stored in REG->RESET_VALUES.
+
+ For EV5, this means disabling profiling, reading the current values,
+ masking in the value for the desired register, writing, then turning
+ profiling back on.
+
+ This can be streamlined if profiling is only enabled for user mode.
+ In that case we know that the counters are not currently incrementing
+ (due to being in kernel mode). */
+
+static void
+ev5_reset_ctr(struct op_register_config *reg, unsigned long ctr)
+{
+ unsigned long values, mask, not_pk, reset_values;
+
+ mask = (ctr == 0 ? 0xfffful << 48
+ : ctr == 1 ? 0xfffful << 32
+ : 0x3fff << 16);
+
+ not_pk = 1 << 9 | 1 << 8;
+
+ reset_values = reg->reset_values;
+
+ if ((reg->proc_mode & not_pk) == not_pk) {
+ values = wrperfmon(5, 0);
+ values = (reset_values & mask) | (values & ~mask & -2);
+ wrperfmon(6, values);
+ } else {
+ wrperfmon(0, -1);
+ values = wrperfmon(5, 0);
+ values = (reset_values & mask) | (values & ~mask & -2);
+ wrperfmon(6, values);
+ wrperfmon(1, reg->enable);
+ }
+}
+
+static void
+ev5_handle_interrupt(unsigned long which, struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ /* Record the sample. */
+ oprofile_add_sample(regs, which);
+}
+
+
+struct op_axp_model op_model_ev5 = {
+ .reg_setup = ev5_reg_setup,
+ .cpu_setup = ev5_cpu_setup,
+ .reset_ctr = ev5_reset_ctr,
+ .handle_interrupt = ev5_handle_interrupt,
+ .cpu_type = "alpha/ev5",
+ .num_counters = 3,
+ .can_set_proc_mode = 1,
+};
+
+struct op_axp_model op_model_pca56 = {
+ .reg_setup = pca56_reg_setup,
+ .cpu_setup = ev5_cpu_setup,
+ .reset_ctr = ev5_reset_ctr,
+ .handle_interrupt = ev5_handle_interrupt,
+ .cpu_type = "alpha/pca56",
+ .num_counters = 3,
+ .can_set_proc_mode = 1,
+};