summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos5250-snow.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/exynos5250-snow.dts')
-rw-r--r--arch/arm/boot/dts/exynos5250-snow.dts195
1 files changed, 155 insertions, 40 deletions
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index f2b8c4116541..e51fcef884a4 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -9,8 +9,8 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "exynos5250.dtsi"
-#include "exynos5250-cros-common.dtsi"
/ {
model = "Google Snow";
@@ -20,6 +20,13 @@
i2c104 = &i2c_104;
};
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ };
+
rtc@101E0000 {
status = "okay";
};
@@ -93,6 +100,13 @@
gpio-keys {
compatible = "gpio-keys";
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 1>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
lid-switch {
label = "Lid";
gpios = <&gpx3 5 1>;
@@ -181,7 +195,7 @@
dcdc3 {
ti,enable-ext-control;
};
- fet1 {
+ fet1: fet1 {
regulator-name = "vcd_led";
ti,overcurrent-wait = <3>;
};
@@ -204,7 +218,7 @@
regulator-always-on;
ti,overcurrent-wait = <3>;
};
- fet6 {
+ fet6: fet6 {
regulator-name = "lcd_vdd";
ti,overcurrent-wait = <3>;
};
@@ -226,26 +240,6 @@
};
};
- mmc@12200000 {
- status = "okay";
- };
-
- mmc@12220000 {
- status = "okay";
- };
-
- /*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
- mmc@12230000 {
- status = "okay";
- slot@0 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
- };
- };
-
i2c@12CD0000 {
max98095: codec@11 {
compatible = "maxim,max98095";
@@ -253,6 +247,15 @@
pinctrl-0 = <&max98095_en>;
pinctrl-names = "default";
};
+
+ ptn3460: lvds-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+ edid-emulation = <5>;
+ panel = <&panel>;
+ };
};
i2s0: i2s@03830000 {
@@ -294,17 +297,24 @@
};
hdmi {
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
hdmi-en-supply = <&tps65090_fet7>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
+ enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+ power-supply = <&fet1>;
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
@@ -314,6 +324,12 @@
samsung,invert-vclk;
};
+ panel: panel {
+ compatible = "auo,b116xw03";
+ power-supply = <&fet6>;
+ backlight = <&backlight>;
+ };
+
dp-controller@145B0000 {
status = "okay";
pinctrl-names = "default";
@@ -325,26 +341,15 @@
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx0 7 0>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing@1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
- };
+ bridge = <&ptn3460>;
};
};
&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
@@ -491,6 +496,10 @@
};
&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
@@ -500,6 +509,106 @@
};
};
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 0>;
+ cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+};
+
&pinctrl_0 {
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
@@ -509,4 +618,10 @@
};
};
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
#include "cros-ec-keyboard.dtsi"