diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6dl-colibri-cam-eval-v3.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-colibri-cam-eval-v3.dts | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6dl-colibri-cam-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-cam-eval-v3.dts new file mode 100644 index 000000000000..433d33e87538 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-cam-eval-v3.dts @@ -0,0 +1,326 @@ +/* + * Copyright 2014-2018 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx6dl-eval", "toradex,colibri_imx6dl", "fsl,imx6dl"; + + aliases { + i2c0 = &i2cddc; + i2c1 = &i2c2; + i2c2 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + aliases { + /* the following, together with kernel patches, forces a fixed assignment + between device id and usdhc controller */ + /* i.e. the eMMC on usdhc3 will be /dev/mmcblk0 */ + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC 4bit slot */ + }; + + extcon_usbc_det: usbc_det { + compatible = "linux,extcon-usb-gpio"; + debounce = <25>; + id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbc_det>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + label = "Wake-Up"; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + v4l2_cap_0 { + compatible = "fsl,imx6q-v4l2-capture"; + ipu_id = <0>; + csi_id = <1>; + mclk_source = <0>; + status = "okay"; + }; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&backlight { + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + pwms = <&pwm3 0 6666667 PWM_POLARITY_INVERTED>; + status = "okay"; +}; + +/ { + clocks { + /* fixed crystal dedicated to mcp251x */ + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; +}; + +/* Colibri SPI */ +&ecspi4 { + status = "okay"; + + mcp251x0: mcp251x@1 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio3>; + interrupts = <27 0x2>; + spi-max-frequency = <10000000>; + status = "okay"; + }; + spidev0: spidev@1 { + compatible = "toradex,evalspi"; + reg = <0>; + spi-max-frequency = <23000000>; + status = "disabled"; + }; +}; + +/* + * I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier + * board) + */ +&i2c3 { + status = "okay"; + +/* the PCAPs use SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm1, pwm4. + so if you enable one of the PCAP controllers disable the pwms */ + /* Atmel maxtouch controller */ + atmel_mxt_ts: atmel_mxt_ts@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcap_1>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + status = "disabled"; + }; + + pcap: pcap@10 { + /* TouchRevolution Fusion 7 and 10 multi-touch controller */ + compatible = "touchrevolution,fusion-f0710a"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcap_1>; + gpios = <&gpio1 9 0 /* SODIMM 28, Pen down interrupt */ + &gpio2 10 0 /* SODIMM 30, Reset */ + >; + status = "disabled"; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + + adv7280: adv7280@21 { + compatible = "adv7280"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0 &pinctrl_cam_mclk>; + clocks = <&clks 200>; + clock-names = "csi_mclk"; + DOVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + PVDD-supply = <®_3p3v>; + csi_id = <1>; + mclk = <24000000>; + mclk_source = <1>; + status = "okay"; + }; + + /* Video ADC on Analog Camera Module */ + adv7180: adv7180@21 { + compatible = "adv,adv7180"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0 &pinctrl_cam_mclk>; + clocks = <&clks 200>; + clock-names = "csi_mclk"; + DOVDD-supply = <®_3p3v>; /* 3.3v */ + AVDD-supply = <®_3p3v>; /* 1.8v */ + DVDD-supply = <®_3p3v>; /* 1.8v */ + PVDD-supply = <®_3p3v>; /* 1.8v */ + csi_id = <1>; + mclk = <24000000>; + mclk_source = <0>; + cvbs = <1>; + status = "disabled"; + }; + max9526: max9526@20 { + compatible = "maxim,max9526"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0 &pinctrl_cam_mclk>; + clocks = <&clks 200>; + clock-names = "csi_mclk"; + DVDDIO-supply = <®_3p3v>; /* 3.3v */ + AVDD-suplsply = <®_3p3v>; /* 1.8v */ + DVDD-supply = <®_3p3v>; /* 1.8v */ + csi_id = <1>; + mclk = <24000000>; + mclk_source = <0>; + cvbs = <1>; + status = "okay"; + }; +}; + +&iomuxc { + /* + * Mux all pins which are unused to be GPIOs + * so they are ready for export to user space + */ + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2 + &pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4 + &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 + &pinctrl_gpio_1 + &pinctrl_gpio_2 + &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 + >; + + gpio { + pinctrl_pcap_1: pcap-1 { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ + >; + }; + + pinctrl_mxt_ts: mxt-ts { + fsl,pins = < + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ + >; + }; + }; +}; + +&lcd { + status = "okay"; +}; + +&mxcfb1 { + status = "okay"; +}; + +&mxcfb2 { + status = "okay"; +}; + +/* the PCAPs use SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm1, pwm4. + so if you enable one of the PCAP controllers disable the pwms */ +&pwm1 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +#if 0 + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; +#endif +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; + extcon = <&extcon_usbc_det>, <&extcon_usbc_det>; +}; + +/* MMC */ +&usdhc1 { + status = "okay"; +}; + +&weim { + status = "okay"; + fsl,weim-cs-gpr = <&gpr>; + /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2, 32MB on CS3 */ + ranges = <0 0 0x08000000 0x02000000 + 1 0 0x0a000000 0x02000000 + 2 0 0x0c000000 0x02000000 + 3 0 0x0e000000 0x02000000>; + /* SRAM on CS0 */ + sram@0,0 { + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + reg = <0 0 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 + 0x00000000 0x04000040 0x00000000>; + }; + /* SRAM on CS1 */ + sram@1,0 { + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + reg = <1 0 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 + 0x00000000 0x04000040 0x00000000>; + }; +}; |