diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6sl-evk.dts')
-rw-r--r-- | arch/arm/boot/dts/imx6sl-evk.dts | 497 |
1 files changed, 3 insertions, 494 deletions
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 4966f38fa2bb..ed0ce8918bfe 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2013-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -9,195 +9,14 @@ /dts-v1/; #include "imx6sl.dtsi" +#include "imx6sl-evk-common.dtsi" / { - model = "Freescale i.MX6 SoloLite EVK Board"; + model = "Freescale i.MX6 SoloLite EVK Board(PFUZE100)"; compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - battery: max8903@0 { - compatible = "fsl,max8903-charger"; - pinctrl-names = "default"; - dok_input = <&gpio4 13 1>; - uok_input = <&gpio4 13 1>; - chg_input = <&gpio4 15 1>; - flt_input = <&gpio4 14 1>; - fsl,dcm_always_high; - fsl,dc_valid; - fsl,adc_disable; - status = "okay"; - }; - regulators { - compatible = "simple-bus"; - - reg_lcd_3v3: lcd-3v3 { - compatible = "regulator-fixed"; - regulator-name = "lcd-3v3"; - gpio = <&gpio4 3 0>; - enable-active-high; - }; - - reg_aud3v: wm8962_supply_3v15 { - compatible = "regulator-fixed"; - regulator-name = "wm8962-supply-3v15"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - regulator-boot-on; - }; - - reg_aud4v: wm8962_supply_4v2 { - compatible = "regulator-fixed"; - regulator-name = "wm8962-supply-4v2"; - regulator-min-microvolt = <4325000>; - regulator-max-microvolt = <4325000>; - regulator-boot-on; - }; - - reg_usb_otg1_vbus: usb_otg1_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 0 0>; - enable-active-high; - }; - - reg_usb_otg2_vbus: usb_otg2_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 2 0>; - enable-active-high; - }; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; - - csi_v4l2_cap { - compatible = "fsl,imx6sl-csi-v4l2"; - status = "disabled"; - }; - - pxp_v4l2_out { - compatible = "fsl,imx6sl-pxp-v4l2"; - status = "okay"; - }; - - sound { - compatible = "fsl,imx6q-sabresd-wm8962", - "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - ssi-controller = <&ssi2>; - audio-codec = <&codec>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; - amic-mono; - mux-int-port = <2>; - mux-ext-port = <3>; - hp-det-gpios = <&gpio4 19 1>; - }; - - sound-spdif { - compatible = "fsl,imx-audio-spdif", - "fsl,imx6sl-evk-spdif"; - model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - }; - - sii902x_reset: sii902x-reset { - compatible = "gpio-reset"; - reset-gpios = <&gpio2 19 1>; - reset-delay-us = <100000>; - #reset-cells = <0>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; -}; - -&csi { - status = "disabled"; -}; - -&ecspi1 { - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio4 11 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - status = "okay"; - - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p32"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&epdc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_epdc_0>; - V3P3-supply = <&V3P3_reg>; - VCOM-supply = <&VCOM_reg>; - DISPLAY-supply = <&DISPLAY_reg>; - status = "okay"; -}; - -&cpu0 { - arm-supply = <&sw1a_reg>; - soc-supply = <&sw1c_reg>; - pu-supply = <&pu_dummy>; /* use pu_dummy if VDDSOC share with VDDPU */ -}; - -&fec { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_fec_1>; - pinctrl-1 = <&pinctrl_fec_1_sleep>; - phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 21 0>; /* GPIO4_21 */ - phy-reset-duration = <1>; - status = "okay"; -}; - -&gpc { - fsl,cpu_pupscr_sw2iso = <0xf>; - fsl,cpu_pupscr_sw = <0xf>; - fsl,cpu_pdnscr_iso2sw = <0x1>; - fsl,cpu_pdnscr_iso = <0x1>; - fsl,ldo-bypass = <1>; /* use ldo-bypass, u-boot will check it and configure */ - fsl,wdog-reset = <1>; /* watchdog select of reset source */ - pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */ -}; - -&gpu { - pu-supply = <&pu_dummy>; /* ldo-bypass:use pu_dummy if VDDSOC share with VDDPU */ }; &i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -297,314 +116,4 @@ }; }; }; - - elan@10 { - compatible = "elan,elan-touch"; - reg = <0x10>; - interrupt-parent = <&gpio2>; - interrupts = <10 2>; - gpio_elan_cs = <&gpio2 9 0>; - gpio_elan_rst = <&gpio4 4 0>; - gpio_intr = <&gpio2 10 0>; - status = "okay"; - }; - - max17135@48 { - compatible = "maxim,max17135"; - reg = <0x48>; - vneg_pwrup = <1>; - gvee_pwrup = <2>; - vpos_pwrup = <10>; - gvdd_pwrup = <12>; - gvdd_pwrdn = <1>; - vpos_pwrdn = <2>; - gvee_pwrdn = <8>; - vneg_pwrdn = <10>; - gpio_pmic_pwrgood = <&gpio2 13 0>; - gpio_pmic_vcom_ctrl = <&gpio2 3 0>; - gpio_pmic_wakeup = <&gpio2 14 0>; - gpio_pmic_v3p3 = <&gpio2 7 0>; - gpio_pmic_intr = <&gpio2 12 0>; - - regulators { - DISPLAY_reg: DISPLAY { - regulator-name = "DISPLAY"; - }; - - GVDD_reg: GVDD { - /* 20v */ - regulator-name = "GVDD"; - }; - - GVEE_reg: GVEE { - /* -22v */ - regulator-name = "GVEE"; - }; - - HVINN_reg: HVINN { - /* -22v */ - regulator-name = "HVINN"; - }; - - HVINP_reg: HVINP { - /* 20v */ - regulator-name = "HVINP"; - }; - - VCOM_reg: VCOM { - regulator-name = "VCOM"; - /* 2's-compliment, -4325000 */ - regulator-min-microvolt = <0xffbe0178>; - /* 2's-compliment, -500000 */ - regulator-max-microvolt = <0xfff85ee0>; - }; - - VNEG_reg: VNEG { - /* -15v */ - regulator-name = "VNEG"; - }; - - VPOS_reg: VPOS { - /* 15v */ - regulator-name = "VPOS"; - }; - - V3P3_reg: V3P3 { - regulator-name = "V3P3"; - }; - }; - }; - - mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_1>; - status = "okay"; - - codec: wm8962@1a { - compatible = "wlf,wm8962"; - reg = <0x1a>; - clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>; - DCVDD-supply = <&vgen3_reg>; - DBVDD-supply = <®_aud3v>; - AVDD-supply = <&vgen3_reg>; - CPVDD-supply = <&vgen3_reg>; - MICVDD-supply = <®_aud3v>; - PLLVDD-supply = <&vgen3_reg>; - SPKVDD1-supply = <®_aud4v>; - SPKVDD2-supply = <®_aud4v>; - amic-mono; - }; - - sii902x@39 { - compatible = "SiI,sii902x"; - interrupt-parent = <&gpio2>; - interrupts = <10 2>; - mode_str ="1280x720M@60"; - bits-per-pixel = <32>; - resets = <&sii902x_reset>; - reg = <0x39>; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_1>; - status = "disabled"; - - ov564x: ov564x@3c { - compatible = "ovti,ov564x"; - reg = <0x3c>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_csi_0>; - clocks = <&clks IMX6SL_CLK_CSI>; - clock-names = "csi_mclk"; - AVDD-supply = <&vgen6_reg>; /* 2.8v */ - DVDD-supply = <&vgen2_reg>; /* 1.5v*/ - pwn-gpios = <&gpio1 25 1>; - rst-gpios = <&gpio1 26 0>; - csi_id = <0>; - mclk = <24000000>; - mclk_source = <0>; - }; -}; - -&iomuxc { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_hog>; - pinctrl-1 = <&pinctrl_hog_sleep>; - - hog { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059 - MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059 - MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059 - MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059 - MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 - MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x80000000 - MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x110b0 - MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 - MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x80000000 - MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x80000000 - MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x80000000 - MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12 0x80000000 - MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x170b0 - MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x80000000 - MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x110b0 - MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000 - MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000 - MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000 - MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0 - MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x1b0b0 - MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 - MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 - >; - }; - - pinctrl_hog_sleep: hoggrp_sleep { - fsl,pins = < - MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x3080 - MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x3080 - MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x3080 - >; - }; - }; -}; - -&kpp { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_kpp_1>; - pinctrl-1 = <&pinctrl_kpp_1_sleep>; - linux,keymap = < - 0x00000067 /* KEY_UP */ - 0x0001006c /* KEY_DOWN */ - 0x0002001c /* KEY_ENTER */ - 0x01000066 /* KEY_HOME */ - 0x0101006a /* KEY_RIGHT */ - 0x01020069 /* KEY_LEFT */ - 0x02000072 /* KEY_VOLUMEDOWN */ - 0x02010073 /* KEY_VOLUMEUP */ - >; - status = "okay"; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat_0 - &pinctrl_lcdif_ctrl_0>; - lcd-supply = <®_lcd_3v3>; - display = <&display>; - status = "okay"; - - display: display { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&pwm1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_pwm1_0>; - pinctrl-1 = <&pinctrl_pwm1_0_sleep>; - status = "okay"; -}; - -&pxp { - status = "okay"; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spdif_1>; - status = "okay"; -}; - -&ssi2 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_1>; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1_1>; - disable-over-current; - imx6-usb-charger-detection; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1_1>; - pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>; - bus-width = <8>; - cd-gpios = <&gpio4 7 0>; - wp-gpios = <&gpio4 6 0>; - keep-power-in-suspend; - enable-sdio-wakeup; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2_1>; - pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>; - cd-gpios = <&gpio5 0 0>; - wp-gpios = <&gpio4 29 0>; - keep-power-in-suspend; - enable-sdio-wakeup; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; - cd-gpios = <&gpio3 22 0>; - keep-power-in-suspend; - enable-sdio-wakeup; - status = "okay"; }; |