diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 156 |
1 files changed, 143 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index cc92baea8250..b290b497cad2 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -28,16 +28,12 @@ clock-frequency = <16000000>; }; - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; + extcon_usbc_det: usbc_det { + compatible = "linux,extcon-usb-gpio"; + debounce = <25>; + id-gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_usbc_det>; }; reg_3v3: regulator-3v3 { @@ -78,6 +74,10 @@ status = "okay"; }; +&pxp { + status = "okay"; +}; + &ecspi1 { status = "okay"; @@ -94,6 +94,13 @@ xceiver-supply = <®_5v0>; status = "okay"; }; + + spidev0: spidev@0 { + compatible = "toradex,evalspi"; + reg = <0>; + spi-max-frequency = <23000000>; + status = "disabled"; + }; }; &flexcan1 { @@ -147,11 +154,119 @@ }; &lcdif { + display = <&display0>; status = "okay"; - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; + display0: lcd-display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing_vga>; + + /* Standard VGA timing */ + timing_vga: 640x480 { + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <24>; + vback-porch = <32>; + vfront-porch = <11>; + hsync-len = <96>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + + /* WVGA Timing, e.g. EDT ET070080DH6 */ + timing_wvga: 800x480 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <216>; + hfront-porch = <40>; + vback-porch = <35>; + vfront-porch = <10>; + hsync-len = <128>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + /* WVGA Timing, TouchRevolution Fusion 7" */ + timing_wvga2: 800x480pixclkact { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <216>; + hfront-porch = <40>; + vback-porch = <35>; + vfront-porch = <10>; + hsync-len = <128>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <1>; + }; + /* Standard SVGA timing */ + timing_svga: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <23>; + vfront-porch = <1>; + hsync-len = <128>; + vsync-len = <4>; + + de-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + pixelclk-active = <0>; + }; + /* TouchRevolution Fusion 10"/CLAA101NC05 10.1 inch */ + timing_wsvga: 1024x600 { + clock-frequency = <48000000>; + hactive = <1024>; + vactive = <600>; + hback-porch = <104>; + hfront-porch = <43>; + vback-porch = <24>; + vfront-porch = <20>; + hsync-len = <5>; + vsync-len = <5>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + /* Standard XGA timing */ + timing_xga: 1024x768 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <160>; + hfront-porch = <24>; + vback-porch = <29>; + vfront-porch = <3>; + hsync-len = <136>; + vsync-len = <6>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; }; }; }; @@ -189,6 +304,8 @@ }; &usbotg1 { + extcon = <&extcon_usbc_det &extcon_usbc_det>; + vbus-supply = <®_usbh_vbus>; status = "okay"; }; @@ -197,7 +314,20 @@ status = "okay"; }; +/* The define SD_1_8 allows to use the SD interface at a higher speed mode + * if the card supports it. For this the signaling voltage is switched from + * 3.3V to 1.8V under the usdhc1's drivers control. + */ +/* #define SD_1_8 */ &usdhc1 { +#ifdef SD_1_8 + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_cd_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_cd_usdhc1>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_cd_usdhc1_sleep>; + vqmmc-supply = <®_sd1_vmmc>; +#else pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; no-1-8-v; |