diff options
Diffstat (limited to 'arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 268 |
1 files changed, 253 insertions, 15 deletions
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 18bebd6d8d47..80db406fb4f8 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -40,20 +40,45 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + / { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + chosen { stdout-path = "serial0:115200n8"; }; - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; + /* fixed crystal dedicated to mpc258x */ + clk16m: clk16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; + extcon_usbc_det: usbc_det { + compatible = "linux,extcon-usb-gpio"; + debounce = <25>; + id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbc_det>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + gpio-key,wakeup; }; }; @@ -70,13 +95,24 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; power-supply = <®_3v3>; - + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; status = "okay"; }; @@ -88,6 +124,35 @@ status = "okay"; }; +&epxp { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; + + mcp2515: can@0 { + compatible = "microchip,mcp2515"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; + status = "okay"; + }; + + spidev0: spidev@0 { + compatible = "toradex,evalspi"; + reg = <0>; + spi-max-frequency = <23000000>; + status = "disabled"; + }; +}; + &fec1 { status = "okay"; }; @@ -95,19 +160,158 @@ &i2c4 { status = "okay"; +/* the PCAPs use SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + so if you enable one of the PCAP controllers disable the pwms */ + /* Atmel maxtouch controller */ + atmel_mxt_ts: atmel_mxt_ts@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + status = "disabled"; + }; + + touch: touchrevf0710a@10 { + compatible = "touchrevolution,fusion-f0710a"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x10>; + /* SODIMM 28, Pen down interrupt */ + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH + /* SODIMM 30, Reset interrupt */ + &gpio1 10 GPIO_ACTIVE_LOW + >; + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; &lcdif { + display = <&display0>; status = "okay"; - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; + display0: lcd-display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing_vga>; + + /* Standard VGA timing */ + timing_vga: 640x480 { + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <24>; + vback-porch = <32>; + vfront-porch = <11>; + hsync-len = <96>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + + /* WVGA Timing, e.g. EDT ET070080DH6 */ + timing_wvga: 800x480 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <216>; + hfront-porch = <40>; + vback-porch = <35>; + vfront-porch = <10>; + hsync-len = <128>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + + /* WVGA Timing, TouchRevolution Fusion 7" */ + timing_wvga2: 800x480pixclkact { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <216>; + hfront-porch = <40>; + vback-porch = <35>; + vfront-porch = <10>; + hsync-len = <128>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <1>; + }; + + /* Standard SVGA timing */ + timing_svga: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <23>; + vfront-porch = <1>; + hsync-len = <128>; + vsync-len = <4>; + + de-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + pixelclk-active = <0>; + }; + + /* TouchRevolution Fusion 10"/CLAA101NC05 10.1 inch */ + timing_wsvga: 1024x600 { + clock-frequency = <48000000>; + hactive = <1024>; + vactive = <600>; + hback-porch = <104>; + hfront-porch = <43>; + vback-porch = <24>; + vfront-porch = <20>; + hsync-len = <5>; + vsync-len = <5>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + + /* Standard XGA timing */ + timing_xga: 1024x768 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <160>; + hfront-porch = <24>; + vback-porch = <29>; + vfront-porch = <3>; + hsync-len = <136>; + vsync-len = <6>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; }; }; }; @@ -141,11 +345,45 @@ }; &usbotg1 { + extcon = <&extcon_usbc_det>, <&extcon_usbc_det>; + vbus-supply = <®_usbh_vbus>; status = "okay"; }; +/* The define SD_1_8 allows to use the SD interface at a higher speed mode + * if the card supports it. For this the signaling voltage is switched from + * 3.3V to 1.8V under the usdhc1's drivers control. + * All pins supplied with NVCC_SD1 must be able to cope with this + * and must (MUST!!!) not be driven with a voltage higher than 1.8V or + * the interface will not work. + */ +/* #define SD_1_8 */ &usdhc1 { +#ifdef SD_1_8 + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; + vqmmc-supply = <®_LDO2>; +#else + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + no-1-8-v; +#endif + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + disable-wp; + enable-sdio-wakeup; keep-power-in-suspend; wakeup-source; + vmmc-supply = <®_3v3>; status = "okay"; }; + +&iomuxc { + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 + >; + }; +}; |