diff options
Diffstat (limited to 'arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi | 331 |
1 files changed, 331 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi new file mode 100644 index 000000000000..fe31c97ff276 --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2018-2019 Toradex + */ + +#include <dt-bindings/input/input.h> + +/ { + chosen { + bootargs = "console=ttymxc0,115200"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; + + extcon_usbc_det: usbc_det { + compatible = "linux,extcon-usb-gpio"; + debounce = <25>; + id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbc_det>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&adc2 { + status = "okay"; +}; + +&epxp { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; + + spidev0: spidev@0 { + compatible = "toradex,evalspi"; + reg = <0>; + spi-max-frequency = <23000000>; + status = "okay"; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + atmel_mxt_ts: atmel_mxt_ts@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x4a>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + status = "okay"; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&lcdif { + display = <&display0>; + status = "okay"; + + display0: lcd-display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing_vga>; + + /* Standard VGA timing */ + timing_vga: 640x480 { + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <24>; + vback-porch = <32>; + vfront-porch = <11>; + hsync-len = <96>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + + /* WVGA Timing, e.g. EDT ET070080DH6 */ + timing_wvga: 800x480 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <216>; + hfront-porch = <40>; + vback-porch = <35>; + vfront-porch = <10>; + hsync-len = <128>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + + /* Standard SVGA timing */ + timing_svga: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <23>; + vfront-porch = <1>; + hsync-len = <128>; + vsync-len = <4>; + + de-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + pixelclk-active = <0>; + }; + + /* Standard XGA timing */ + timing_xga: 1024x768 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <160>; + hfront-porch = <24>; + vback-porch = <29>; + vfront-porch = <3>; + hsync-len = <136>; + vsync-len = <6>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + /* The pwm2 pins are used by atmel_mxt_ts touchscreen. */ + status = "disabled"; +}; + +&pwm3 { + /* The pwm3 pins are used by atmel_mxt_ts touchscreen. */ + status = "disabled"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + extcon = <&extcon_usbc_det>, <&extcon_usbc_det>; + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&gpio2 { + /* + * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to + * turn the transceiver off, that property has to be deleted and the + * gpio handled in userspace. + * The same applies to uart1_tx_on and lvds_tx_on, where the UART / LVDS + * transceiver is turned on. + */ + uart25_tx_on { + gpio-hog; + gpios = <27 0>; /* SODIMM 104 */ + output-high; + }; +}; + +&gpio5 { + uart1_tx_on { + gpio-hog; + gpios = <17 0>; /* SODIMM 102 */ + output-high; + }; +}; + +&gpio7 { + lvds_tx_on { + gpio-hog; + gpios = <11 0>; /* SODIMM 99 */ + output-high; + }; +}; + +/* The define SD_1_8 allows to use the SD interface at a higher speed mode + * if the card supports it. For this the signaling voltage is switched from + * 3.3V to 1.8V under the usdhc1's drivers control. + * All pins supplied with NVCC_SD1 must be able to cope with this + * and must (MUST!!!) not be driven with a voltage higher than 1.8V or + * the interface will not work. + */ +#define SD_1_8 +&usdhc1 { +#ifdef SD_1_8 + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; + pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>; + vqmmc-supply = <®_LDO2>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +#else + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>; + no-1-8-v; +#endif + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + disable-wp; + enable-sdio-wakeup; + cap-power-off-card; + wakeup-source; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc1_sleep: usdhc1-slp-grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x10 + MX7D_PAD_SD1_CLK__SD1_CLK 0x10 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x10 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x10 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x10 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x10 + >; + }; + + pinctrl_cd_usdhc1_sleep: usdhc1-cd-slp-grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0 /* CD */ + >; + }; + + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 + >; + }; +}; + |