1 files changed, 3 insertions, 86 deletions
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 597099907f8e..7bbda683ee0a 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -1,94 +1,11 @@
 /*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-/*
- * The Gumstix Overo must be combined with an expansion board.
- */
-
-/ {
-	pwmleds {
-		compatible = "pwm-leds";
-
-		overo {
-			label = "overo:blue:COM";
-			pwms = <&twl_pwmled 1 7812500>;
-			max-brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "overo";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-/* i2c2 pins are used for gpio */
-&i2c2 {
-	status = "disabled";
-};
-
-/* on board microSD slot */
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-/* optional on board WiFi */
-&mmc2 {
-	bus-width = <4>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&omap3_pmx_core {
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-};
+#include "omap34xx.dtsi"
+#include "omap3-overo-base.dtsi"
 
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};