diff options
Diffstat (limited to 'arch/arm/boot/dts/ste-nomadik-s8815.dts')
| -rw-r--r-- | arch/arm/boot/dts/ste-nomadik-s8815.dts | 56 |
1 files changed, 48 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index cc81ae7450a9..85d3b95dfdba 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -4,6 +4,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include "ste-nomadik-stn8815.dtsi" / { @@ -14,14 +15,6 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; - /* This is where the interrupt is routed on the S8815 board */ - external-bus@34000000 { - ethernet@300 { - interrupt-parent = <&gpio3>; - interrupts = <8 0x1>; - }; - }; - src@101e0000 { /* These chrystal drivers are not used on this board */ disable-sxtalo; @@ -47,6 +40,14 @@ }; }; }; + gpioi2c { + gpioi2c_default_mode: gpioi2c_default { + gpioi2c_default_cfg { + pins = "GPIO73_C21", "GPIO74_C20"; + ste,input = <0>; + }; + }; + }; user-led { user_led_default_mode: user_led_default { user_led_default_cfg { @@ -65,6 +66,45 @@ }; }; + /* Ethernet */ + external-bus@34000000 { + compatible = "simple-bus"; + reg = <0x34000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x34000000 0x1000000>; + ethernet@300 { + compatible = "smsc,lan91c111"; + reg = <0x300 0x0fd00>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + }; + }; + + /* GPIO I2C connected to the USB portions of the STw4811 only */ + gpio-i2c { + compatible = "i2c-gpio"; + gpios = <&gpio2 10 0>, /* sda */ + <&gpio2 9 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpioi2c_default_mode>; + + stw4811@2d { + compatible = "st,stw4811-usb"; + reg = <0x2d>; + }; + }; + + + /* Configure card detect for the uSD slot */ + amba { + mmcsd: sdi@101f6000 { + cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* This will bias the MMC/SD card detect line */ |