diff options
Diffstat (limited to 'arch/arm/boot/dts/vfxxx.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/vfxxx.dtsi | 254 |
1 files changed, 249 insertions, 5 deletions
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 3cd1b27f2697..bf4e8048fac8 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -16,6 +16,8 @@ aliases { can0 = &can0; can1 = &can1; + ethernet0 = &fec0; + ethernet1 = &fec1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -53,9 +55,56 @@ soc { #address-cells = <1>; #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&mscm_ir>; + compatible = "fsl,vf610-soc-bus", "simple-bus"; + interrupt-parent = <&gpc>; ranges; + fsl,rom-revision = <&ocrom 0x80>; + fsl,cpu-count = <&mscm_cpucfg 0x2C>; + fsl,l2-size = <&mscm_cpucfg 0x14>; + nvmem-cells = <&ocotp_cfg0>, <&ocotp_cfg1>; + nvmem-cell-names = "cfg0", "cfg1"; + + ocrom: ocrom@00000000 { + compatible = "fsl,vf610-ocrom", "syscon"; + reg = <0x00000000 0x18000>; + }; + + ocram0: sram@3f000000 { + compatible = "mmio-sram"; + reg = <0x3f000000 0x40000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x3f000000 0x40000>; + + stbyram1@0 { + reg = <0x0 0x4000>; + label = "stbyram1"; + pool; + }; + + stbyram2@4000 { + reg = <0x4000 0xc000>; + label = "stbyram2"; + pool; + }; + }; + + ocram1: sram@3f040000 { + compatible = "mmio-sram"; + reg = <0x3f040000 0x40000>; + }; + + gfxram0: sram@3f400000 { + compatible = "mmio-sram"; + reg = <0x3f400000 0x80000>; + }; + + /* used by L2 cache */ + gfxram1: sram@3f480000 { + compatible = "mmio-sram"; + reg = <0x3f480000 0x80000>; + }; aips0: aips-bus@40000000 { compatible = "fsl,aips-bus", "simple-bus"; @@ -70,10 +119,22 @@ mscm_ir: interrupt-controller@40001800 { compatible = "fsl,vf610-mscm-ir"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x40001800 0x400>; fsl,cpucfg = <&mscm_cpucfg>; interrupt-controller; #interrupt-cells = <2>; + + cpu2cpu@40001800 { + reg = <0x40001800 0x40>; + interrupt-parent = <&mscm_ir>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>, + <2 IRQ_TYPE_LEVEL_HIGH>, + <3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1", "int2", "int3"; + }; }; edma0: dma-controller@40018000 { @@ -159,6 +220,9 @@ clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <6>; + dmas = <&edma1 1 12>, + <&edma1 1 13>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -171,6 +235,37 @@ clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; spi-num-chipselects = <4>; + dmas = <&edma1 1 14>, + <&edma1 1 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai0: sai@4002f000 { + compatible = "fsl,vf610-sai"; + reg = <0x4002f000 0x1000>; + interrupts = <84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI0>, + <&clks VF610_CLK_SAI0_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 17>, + <&edma0 0 16>; + status = "disabled"; + }; + + sai1: sai@40030000 { + compatible = "fsl,vf610-sai"; + reg = <0x40030000 0x1000>; + interrupts = <85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI1>, + <&clks VF610_CLK_SAI1_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 19>, + <&edma0 0 18>; status = "disabled"; }; @@ -188,6 +283,20 @@ status = "disabled"; }; + sai3: sai@40032000 { + compatible = "fsl,vf610-sai"; + reg = <0x40032000 0x1000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_SAI3>, + <&clks VF610_CLK_SAI3_DIV>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 9>, + <&edma0 1 8>; + status = "disabled"; + }; + pit: pit@40037000 { compatible = "fsl,vf610-pit"; reg = <0x40037000 0x1000>; @@ -234,6 +343,14 @@ <20000000>; }; + tcon0: timing-controller@4003d000 { + compatible = "fsl,vf610-tcon"; + reg = <0x4003d000 0x1000>; + clocks = <&clks VF610_CLK_TCON0>; + clock-names = "ipg"; + status = "disabled"; + }; + wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; @@ -270,6 +387,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 0 32>; + fsl,gpio-wakeup = <&wakeup 22 0 8>; /* PTB0...PTB7 */ }; gpio1: gpio@4004a000 { @@ -281,6 +399,10 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 32 32>; + fsl,gpio-wakeup = <&wakeup 1 8 2>, /* PTB11, PTB12 (NMI)*/ + <&wakeup 4 10 1>, /* PTB14 */ + <&wakeup 6 11 1>, /* PTB16 */ + <&wakeup 9 12 2>; /* PTB19, PTB20 */ }; gpio2: gpio@4004b000 { @@ -303,6 +425,9 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 96 32>; + fsl,gpio-wakeup = <&wakeup 1 14 1>, /* PTB27 */ + <&wakeup 7 15 1>, /* PTC30 */ + <&wakeup 29 16 1>; /* PTE20 */ }; gpio4: gpio@4004d000 { @@ -321,6 +446,11 @@ reg = <0x40050000 0x400>; }; + scsc: scsc@40052000 { + compatible = "fsl,vf610-scsc"; + reg = <0x40052000 0x1000>; + }; + usbphy0: usbphy@40050800 { compatible = "fsl,vf610-usbphy"; reg = <0x40050800 0x400>; @@ -339,6 +469,17 @@ status = "disabled"; }; + dcu0: dcu@40058000 { + compatible = "fsl,vf610-dcu"; + reg = <0x40058000 0x1200>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DCU0>, + <&clks VF610_CLK_DCU0_DIV>; + clock-names = "dcu", "pix"; + fsl,tcon = <&tcon0>; + status = "disabled"; + }; + i2c0: i2c@40066000 { #address-cells = <1>; #size-cells = <0>; @@ -367,8 +508,15 @@ status = "disabled"; }; + wakeup: wkpu@4006a000 { + compatible = "fsl,vf610-wkpu"; + reg = <0x4006a000 0x1000>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_WKPU>; + }; + clks: ccm@4006b000 { - compatible = "fsl,vf610-ccm"; + compatible = "fsl,vf610-ccm", "syscon"; reg = <0x4006b000 0x1000>; clocks = <&sxosc>, <&fxosc>; clock-names = "sxosc", "fxosc"; @@ -376,7 +524,7 @@ }; usbdev0: usb@40034000 { - compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + compatible = "fsl,vf610-usb"; reg = <0x40034000 0x800>; interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC0>; @@ -399,6 +547,14 @@ reg = <0x4006e000 0x1000>; interrupts = <96 IRQ_TYPE_LEVEL_HIGH>; }; + + gpc: gpc@4006c000 { + compatible = "fsl,vf610-gpc"; + reg = <0x4006c000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&mscm_ir>; + }; }; aips1: aips-bus@40080000 { @@ -423,6 +579,22 @@ status = "disabled"; }; + ocotp@400a5000 { + compatible = "fsl,vf610-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x400a5000 0xCF0>; + clocks = <&clks VF610_CLK_OCOTP>; + + ocotp_cfg0: cfg0@410 { + reg = <0x410 0x4>; + }; + + ocotp_cfg1: cfg1@420 { + reg = <0x420 0x4>; + }; + }; + snvs0: snvs@400a7000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x400a7000 0x2000>; @@ -455,6 +627,43 @@ status = "disabled"; }; + dspi2: dspi2@400ac000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x400ac000 0x1000>; + interrupts = <69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DSPI2>; + clock-names = "dspi"; + spi-num-chipselects = <2>; + dmas = <&edma1 0 10>, + <&edma1 0 11>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + dspi3: dspi3@400ad000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x400ad000 0x1000>; + interrupts = <70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DSPI3>; + clock-names = "dspi"; + spi-num-chipselects = <2>; + dmas = <&edma1 0 12>, + <&edma1 0 13>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ddrmc: ddrmc@400ae000 { + compatible = "fsl,vf610-ddrmc"; + reg = <0x400ae000 0x400>; + clocks = <&clks VF610_CLK_DDRMC>; + clock-names = "ddrc"; + }; + adc1: adc@400bb000 { compatible = "fsl,vf610-adc"; reg = <0x400bb000 0x1000>; @@ -490,7 +699,7 @@ }; usbh1: usb@400b4000 { - compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + compatible = "fsl,vf610-usb"; reg = <0x400b4000 0x800>; interrupts = <76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC1>; @@ -534,6 +743,24 @@ status = "disabled"; }; + dac0: dac@400cc000 { + compatible = "fsl,vf610-dac"; + reg = <0x400cc000 1000>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dac"; + clocks = <&clks VF610_CLK_DAC0>; + status = "disabled"; + }; + + dac1: dac@400cd000 { + compatible = "fsl,vf610-dac"; + reg = <0x400cd000 1000>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dac"; + clocks = <&clks VF610_CLK_DAC1>; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; @@ -577,6 +804,18 @@ status = "disabled"; }; + esw: l2-switch@400e8000 { + compatible = "fsl,eth-switch"; + reg = <0x400e8000 0x1000 0x400d0000 0x2000>; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_ESW>, + <&clks VF610_CLK_ENET>, + <&clks VF610_CLK_ENET0>, + <&clks VF610_CLK_ENET1>; + clock-names = "esw", "enet", "enet0", "enet1"; + status = "disabled"; + }; + i2c2: i2c@400e6000 { #address-cells = <1>; #size-cells = <0>; @@ -605,5 +844,10 @@ status = "disabled"; }; }; + + adc_hwmon: iio_hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 16>, <&adc1 16>; + }; }; }; |