summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r--arch/arm/boot/dts/Makefile1
-rw-r--r--arch/arm/boot/dts/am571x-idk.dts26
-rw-r--r--arch/arm/boot/dts/am572x-idk.dts27
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi29
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts15
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-revc.dts39
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts11
-rw-r--r--arch/arm/boot/dts/am57xx-idk-common.dtsi8
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts22
-rw-r--r--arch/arm/boot/dts/dra71-evm.dts14
-rw-r--r--arch/arm/boot/dts/dra72-evm-revc.dts14
-rw-r--r--arch/arm/boot/dts/dra72-evm.dts14
-rw-r--r--arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi350
-rw-r--r--arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi647
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts2
15 files changed, 1171 insertions, 48 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 03995aa0559f..944f94f61eb6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -652,6 +652,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \
dtb-$(CONFIG_SOC_DRA7XX) += \
am57xx-beagle-x15.dtb \
am57xx-beagle-x15-revb1.dtb \
+ am57xx-beagle-x15-revc.dtb \
am57xx-cl-som-am57x.dtb \
am57xx-sbc-am57x.dtb \
am572x-idk.dtb \
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 0c0bb4e93f25..debf9464403e 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -11,6 +11,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
/ {
model = "TI AM5718 IDK";
@@ -64,13 +65,6 @@
};
};
-&mmc1 {
- status = "okay";
- vmmc-supply = <&ldo1_reg>;
- bus-width = <4>;
- cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
@@ -105,3 +99,21 @@
&pcie1_ep {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 604d52554eda..a578fe97ba3b 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -12,6 +12,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
/ {
model = "TI AM5728 IDK";
@@ -67,6 +68,24 @@
};
};
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
+
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
@@ -76,14 +95,6 @@
vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
};
-&mmc1 {
- status = "okay";
- vmmc-supply = <&v3_3d>;
- vqmmc-supply = <&ldo1_reg>;
- bus-width = <4>;
- cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
&sn65hvs882 {
load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index d433a50cd18a..49aeecd312b4 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -9,6 +9,7 @@
#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -166,34 +167,6 @@
};
};
-&dra7_pmx_core {
- mmc1_pins_default: mmc1_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
-
- mmc2_pins_default: mmc2_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
- >;
- };
-};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
index 578398c781b1..5a77b334923d 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -19,10 +19,25 @@
};
&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
&phy1 {
max-speed = <100>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
new file mode 100644
index 000000000000..17c41da3b55f
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+ model = "TI AM5728 BeagleBoard-X15 rev C";
+};
+
+&tpd12s015 {
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
+ <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 19a60a11c198..d6689106d2a8 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -20,9 +20,20 @@
};
&mmc1 {
+ pinctrl-names = "default", "hs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+
vmmc-supply = <&ldo1_reg>;
};
+&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
&phy1 {
max-speed = <100>;
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index c536b2f5389f..97aa8e6a56da 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -399,6 +399,14 @@
dr_mode = "peripheral";
};
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&v3_3d>;
+ vqmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
&mmc2 {
status = "okay";
vmmc-supply = <&v3_3d>;
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 5e3f9ba861f0..aa426dabb6c3 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -9,6 +9,7 @@
#include "dra74x.dtsi"
#include "dra7-evm-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
/ {
model = "TI DRA742";
@@ -326,8 +327,6 @@
&mmc1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&evm_3v3_sd>;
vqmmc-supply = <&ldo1_reg>;
bus-width = <4>;
@@ -336,14 +335,29 @@
* is always hardwired.
*/
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
+ pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+ pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&evm_1v8_sw>;
bus-width = <8>;
+ pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
+ pinctrl-3 = <&mmc2_pins_ddr_rev20>;
+ pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
+ pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
};
&cpu0 {
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 8b1722301c9a..ba1ba2a83b8a 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -7,6 +7,7 @@
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
@@ -172,10 +173,23 @@
};
&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
vqmmc-supply = <&vpo_sd_1v8_3v3>;
};
&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
vmmc-supply = <&evm_1v8_sw>;
};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 5532309971ae..670c9c3e6cf0 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
@@ -94,9 +95,22 @@
};
&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
vqmmc-supply = <&ldo1_reg>;
};
&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
vmmc-supply = <&evm_1v8_sw>;
};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 99fdb3d8445b..c572693b1665 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
/ {
model = "TI DRA722";
@@ -55,9 +56,22 @@
};
&mmc1 {
+ pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_hs>;
+ pinctrl-2 = <&mmc1_pins_sdr12>;
+ pinctrl-3 = <&mmc1_pins_sdr25>;
+ pinctrl-4 = <&mmc1_pins_sdr50>;
+ pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+ pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
vqmmc-supply = <&ldo1_reg>;
};
&mmc2 {
+ pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_hs>;
+ pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+ pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
vmmc-supply = <&evm_1v8_sw>;
};
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..088013c6dc6e
--- /dev/null
+++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
@@ -0,0 +1,350 @@
+/*
+ * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev10' for PG 1.0,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and
+ * 'dra72_' tag to entries. Both the new and old entries should gain a tag.
+ *
+ * Datamanual Revisions:
+ *
+ * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
+ * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
+ * DRA71x : SPRS960B, Revised February 2017
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: mmc1_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr25: mmc1_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr104: mmc1_pins_sdr104 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs: mmc2_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ >;
+ };
+
+ mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2_pins_hs200 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */
+ 0x624 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x630 A_DELAY_PS(1375) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x63C A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x648 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x654 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x620 A_DELAY_PS(1230) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65C A_DELAY_PS(99) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC1_MANUAL2 in datamanual */
+ mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(560) G_DELAY_PS(365) /* CFG_MMC1_CLK_OUT */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(29) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65c A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(433) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64c A_DELAY_PS(287) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(351) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC1_MANUAL2 in datamanual */
+ mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(520) G_DELAY_PS(320) /* CFG_MMC1_CLK_OUT */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x638 A_DELAY_PS(40) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x644 A_DELAY_PS(83) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x650 A_DELAY_PS(98) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x65c A_DELAY_PS(106) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ 0x628 A_DELAY_PS(51) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x640 A_DELAY_PS(363) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x64c A_DELAY_PS(199) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x658 A_DELAY_PS(273) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */
+ 0x1a4 A_DELAY_PS(119) G_DELAY_PS(0) /* CFG_GPMC_A20_IN */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_IN */
+ 0x1bc A_DELAY_PS(18) G_DELAY_PS(0) /* CFG_GPMC_A22_IN */
+ 0x1c8 A_DELAY_PS(894) G_DELAY_PS(0) /* CFG_GPMC_A23_IN */
+ 0x1d4 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_IN */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1ec A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */
+ 0x1f8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_IN */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x194 A_DELAY_PS(152) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(206) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(78) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(266) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL3 in datamanual */
+ mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf {
+ pinctrl-pin-array = <
+ 0x194 A_DELAY_PS(150) G_DELAY_PS(95) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(250) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(100) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(870) G_DELAY_PS(415) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(695) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(924) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(719) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(824) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(877) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(446) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(847) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(586) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(1039) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+
+ /* Corresponds to MMC2_MANUAL3 in datamanual */
+ mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+ pinctrl-pin-array = <
+ 0x194 A_DELAY_PS(285) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1ac A_DELAY_PS(189) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b8 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_OUT */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(70) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(730) G_DELAY_PS(360) /* CFG_GPMC_A23_OUT */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f4 A_DELAY_PS(70) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x368 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_CS1_OUT */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x1a8 A_DELAY_PS(231) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1b4 A_DELAY_PS(39) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1c0 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1d8 A_DELAY_PS(176) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1f0 A_DELAY_PS(101) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x364 A_DELAY_PS(360) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..28ebb4eb884a
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -0,0 +1,647 @@
+/*
+ * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ * Datamanual revision that was used should be updated in comment below.
+ * If there is no update to datamanual, do not update the values. If you
+ * need to use values different from that recommended by the datamanual
+ * for your design, then you should consider adding values to the device-
+ * -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ * we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ * 'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ * to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
+ *
+ */
+
+&dra7_pmx_core {
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr12: mmc1_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_hs: mmc1_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr25: mmc1_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr50: mmc1_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_ddr50: mmc1_pins_ddr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc1_pins_sdr104: mmc1_pins_sdr104 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs: mmc2_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc2_pins_hs200: mmc2_pins_hs200 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ mmc4_pins_default: mmc4_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc4_pins_hs: mmc4_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc3_pins_default: mmc3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_hs: mmc3_pins_hs {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr12: mmc3_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr25: mmc3_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc3_pins_sdr50: mmc3_pins_sdr50 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ >;
+ };
+
+ mmc4_pins_sdr12: mmc4_pins_sdr12 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+
+ mmc4_pins_sdr25: mmc4_pins_sdr25 {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+ >;
+ };
+};
+
+&dra7_iodelay_core {
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(572) G_DELAY_PS(540) /* CFG_MMC1_CLK_IN */
+ 0x620 A_DELAY_PS(1525) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x624 A_DELAY_PS(0) G_DELAY_PS(600) /* CFG_MMC1_CMD_IN */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(55) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x630 A_DELAY_PS(403) G_DELAY_PS(120) /* CFG_MMC1_DAT0_IN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x63c A_DELAY_PS(23) G_DELAY_PS(60) /* CFG_MMC1_DAT1_IN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x648 A_DELAY_PS(25) G_DELAY_PS(60) /* CFG_MMC1_DAT2_IN */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+ mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf {
+ pinctrl-pin-array = <
+ 0x618 A_DELAY_PS(1076) G_DELAY_PS(330) /* CFG_MMC1_CLK_IN */
+ 0x620 A_DELAY_PS(1271) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
+ 0x624 A_DELAY_PS(722) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x630 A_DELAY_PS(751) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(20) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x63C A_DELAY_PS(256) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x648 A_DELAY_PS(263) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
+ 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(1063) G_DELAY_PS(17) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+ mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+ pinctrl-pin-array = <
+ 0x620 A_DELAY_PS(600) G_DELAY_PS(400) /* CFG_MMC1_CLK_OUT */
+ 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
+ 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
+ 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
+ 0x638 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
+ 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
+ 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
+ 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
+ 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
+ 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
+ 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(621) G_DELAY_PS(600) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(300) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(739) G_DELAY_PS(600) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(812) G_DELAY_PS(600) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(954) G_DELAY_PS(600) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(935) G_DELAY_PS(600) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(525) G_DELAY_PS(600) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(767) G_DELAY_PS(600) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(225) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(565) G_DELAY_PS(600) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(969) G_DELAY_PS(600) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(180) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+ mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+ pinctrl-pin-array = <
+ 0x190 A_DELAY_PS(274) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(162) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a8 A_DELAY_PS(401) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(73) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b4 A_DELAY_PS(465) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(115) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1c0 A_DELAY_PS(633) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1d0 A_DELAY_PS(935) G_DELAY_PS(280) /* CFG_GPMC_A23_OUT */
+ 0x1d8 A_DELAY_PS(621) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e4 A_DELAY_PS(183) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1f0 A_DELAY_PS(467) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1fc A_DELAY_PS(262) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(46) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x364 A_DELAY_PS(684) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */
+ 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1ec A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A26_IN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */
+ mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */
+ 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
+ 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */
+ 0x1a4 A_DELAY_PS(274) G_DELAY_PS(240) /* CFG_GPMC_A20_IN */
+ 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
+ 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A21_IN */
+ 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
+ 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A22_IN */
+ 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
+ 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
+ 0x1c8 A_DELAY_PS(514) G_DELAY_PS(360) /* CFG_GPMC_A23_IN */
+ 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */
+ 0x1d4 A_DELAY_PS(187) G_DELAY_PS(120) /* CFG_GPMC_A24_IN */
+ 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
+ 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
+ 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
+ 0x1ec A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A26_IN */
+ 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
+ 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
+ 0x1f8 A_DELAY_PS(121) G_DELAY_PS(60) /* CFG_GPMC_A27_IN */
+ 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
+ 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
+ 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC3_MANUAL1 in datamanual */
+ mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf {
+ pinctrl-pin-array = <
+ 0x678 A_DELAY_PS(406) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */
+ 0x680 A_DELAY_PS(659) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
+ 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
+ 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
+ 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
+ 0x690 A_DELAY_PS(130) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
+ 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
+ 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
+ 0x69c A_DELAY_PS(169) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
+ 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
+ 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
+ 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
+ 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
+ 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
+ 0x6b4 A_DELAY_PS(457) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
+ 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
+ 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(96) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(582) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(391) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(561) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+ mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(2651) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1572) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(1913) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1721) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1891) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(1919) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+
+ /* Corresponds to MMC4_MANUAL1 in datamanual */
+ mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf {
+ pinctrl-pin-array = <
+ 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
+ 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
+ 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
+ 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
+ 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
+ 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
+ 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
+ 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
+ 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */
+ 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
+ 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
+ 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */
+ 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
+ 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
+ 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */
+ 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
+ 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 43e9364083de..b4575bbaf085 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -192,7 +192,7 @@
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins &mmc1_cd>;
- cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */
+ cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
vmmc-supply = <&vmmc1>;
bus-width = <4>;
cap-power-off-card;