diff options
Diffstat (limited to 'arch/arm/boot/dts')
36 files changed, 167 insertions, 119 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a5738197983a..fafb6f91c23a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -166,6 +166,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ds109.dtb \ kirkwood-ds110jv10.dtb \ kirkwood-ds111.dtb \ + kirkwood-ds112.dtb \ kirkwood-ds209.dtb \ kirkwood-ds210.dtb \ kirkwood-ds212.dtb \ diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index a74b09f17a1a..e7cd99793bc6 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -411,7 +411,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>; tps65218: tps65218@24 { reg = <0x24>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 0bd325c314e1..2b882d129b16 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -231,6 +231,11 @@ atmel,pins = <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ }; + pinctrl_usb_default: usb_default { + atmel,pins = + <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; }; }; @@ -288,6 +293,8 @@ &pioE 3 GPIO_ACTIVE_LOW &pioE 4 GPIO_ACTIVE_LOW >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index e27024cdf48b..17adaa1a65c1 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -152,6 +152,11 @@ atmel,pins = <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; }; + pinctrl_usb_default: usb_default { + atmel,pins = + <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; pinctrl_key_gpio: key_gpio_0 { atmel,pins = <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; @@ -177,6 +182,8 @@ &pioE 11 GPIO_ACTIVE_HIGH &pioE 14 GPIO_ACTIVE_HIGH >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 34cd64051250..84efc3d16f58 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -152,7 +152,7 @@ status = "disabled"; }; - nand: nand@2000 { + nand_controller: nand-controller@2000 { #address-cells = <1>; #size-cells = <0>; compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts index 0bb8d17e4c2d..e51c9b079432 100644 --- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts +++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts @@ -13,10 +13,10 @@ }; }; -&nand { +&nand_controller { status = "okay"; - nandcs@1 { + nand@1 { compatible = "brcm,nandcs"; reg = <1>; nand-ecc-step-size = <512>; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 4791321969b3..3f002f2047f1 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -149,7 +149,7 @@ reg-names = "aon-ctrl", "aon-sram"; }; - nand: nand@3e2800 { + nand_controller: nand-controller@3e2800 { status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 370aa2cfddf2..439cff69e948 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -29,10 +29,10 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - nandcs@0 { + nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-ecc-strength = <4>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 0f5dcd418af8..97b152e43f9c 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -134,7 +134,7 @@ compatible = "maxim,max77686"; reg = <0x09>; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 0a7f408824d8..b45ad99da8c5 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -281,7 +281,7 @@ max77686: max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index c1edd6d038a9..4b3bd43f7721 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -112,7 +112,7 @@ compatible = "samsung,s5m8767-pmic"; reg = <0x66>; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index b54c0b8a5b34..5cf9bcc91c4a 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -75,7 +75,7 @@ s2mps11,buck4-ramp-enable = <1>; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index 2faf88627a48..b45e2a0c3908 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -26,7 +26,7 @@ label = "blue:heartbeat"; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; - max_brightness = <255>; + max-brightness = <255>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 7c869fe3c30b..3baf5c4eec5b 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -81,8 +81,8 @@ imx27-phycard-s-rdk { pinctrl_i2c1: i2c1grp { fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 >; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 27d763c7a307..4dbd180e72ba 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -66,7 +66,7 @@ MX50_PAD_CSPI_MISO__CSPI_MISO 0x00 MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00 MX50_PAD_CSPI_SS0__GPIO4_11 0xc4 - MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0xf4 + MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index cae04e806036..e3e3a7a08d08 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -307,8 +307,8 @@ fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1 >; }; @@ -383,6 +383,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 1211da894ee9..061e6a00b255 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -39,7 +39,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index bf4143c6cb8f..b84af3da8c84 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -14,7 +14,7 @@ #include "kirkwood-synology.dtsi" / { - model = "Synology DS111"; + model = "Synology DS112"; compatible = "synology,ds111", "marvell,kirkwood"; memory { diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts index 09eed3cea0af..36eec7392ab4 100644 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WVL/VL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -185,38 +186,38 @@ led@1 { label = "lswvl:red:alarm"; - gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; led@2 { label = "lswvl:red:func"; - gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; led@3 { label = "lswvl:amber:info"; - gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; led@4 { label = "lswvl:blue:func"; - gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; led@5 { label = "lswvl:blue:power"; - gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "keep"; }; led@6 { label = "lswvl:red:hdderr0"; - gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswvl:red:hdderr1"; - gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; }; }; @@ -233,7 +234,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; restart_poweroff { diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts index f5db16a08597..b13ec20a7088 100644 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WXL/WSXL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -185,12 +186,12 @@ led@1 { label = "lswxl:blue:func"; - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lswxl:red:alarm"; - gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; led@3 { @@ -200,23 +201,23 @@ led@4 { label = "lswxl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; led@5 { label = "lswxl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; }; @@ -225,15 +226,15 @@ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW - &gpio0 48 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 3 1500 2 3250 1 5000 0>; - alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -256,7 +257,7 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; hdd_power0: regulator@2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 8a2b25332b8c..a2e41d79e829 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -22,6 +22,9 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 8a5628c4b135..656e35ec037d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -21,6 +21,11 @@ i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4c04389dab32..b61ea6ca59b3 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -26,6 +26,11 @@ i2c2 = &i2c3; i2c3 = &i2c4; i2c4 = &i2c5; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec912b4bf..aae8a7aceab7 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com> + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -69,8 +70,6 @@ internal-regs { pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; pmx_led_power: pmx-leds { @@ -162,6 +161,7 @@ led@1 { label = "lswtgl:blue:power"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; led@2 { @@ -188,7 +188,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -228,6 +228,37 @@ }; }; +&devbus_bootcs { + status = "okay"; + devbus,keep-config; + + flash@0 { + compatible = "jedec-flash"; + reg = <0 0x40000>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + header@0 { + reg = <0 0x30000>; + read-only; + }; + + uboot@30000 { + reg = <0x30000 0xF000>; + read-only; + }; + + uboot_env@3F000 { + reg = <0x3F000 0x1000>; + }; + }; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index 533919e96eae..f22a6b436317 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -54,18 +54,21 @@ emac: gem@30000 { compatible = "cadence,gem"; reg = <0x30000 0x10000>; + interrupt-parent = <&vic0>; interrupts = <31>; }; dmac1: dmac@40000 { compatible = "snps,dw-dmac"; reg = <0x40000 0x10000>; + interrupt-parent = <&vic0>; interrupts = <25>; }; dmac2: dmac@50000 { compatible = "snps,dw-dmac"; reg = <0x50000 0x10000>; + interrupt-parent = <&vic0>; interrupts = <26>; }; @@ -243,6 +246,7 @@ axi2pico@c0000000 { compatible = "picochip,axi2pico-pc3x2"; reg = <0xc0000000 0x10000>; + interrupt-parent = <&vic0>; interrupts = <13 14 15 16 17 18 19 20 21>; }; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 105d9c95de4a..5c76dcc89df5 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -180,7 +180,7 @@ }; &extal1_clk { - clock-frequency = <25000000>; + clock-frequency = <24000000>; }; &extal2_clk { clock-frequency = <48000000>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index e14cb1438216..2c43e12eb99a 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -461,7 +461,7 @@ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7740-cpg-clocks"; reg = <0xe6150000 0x10000>; - clocks = <&extal1_clk>, <&extalr_clk>; + clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>; #clock-cells = <1>; clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r", diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index b03fe747b98c..48bcab25720a 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -99,19 +99,16 @@ }; clocks: clock-controller@e0100000 { - compatible = "samsung,s5pv210-clock", "simple-bus"; + compatible = "samsung,s5pv210-clock"; reg = <0xe0100000 0x10000>; clock-names = "xxti", "xusbxti"; clocks = <&xxti>, <&xusbxti>; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + }; - pmu_syscon: syscon@e0108000 { - compatible = "samsung-s5pv210-pmu", "syscon"; - reg = <0xe0108000 0x8000>; - }; + pmu_syscon: syscon@e0108000 { + compatible = "samsung-s5pv210-pmu", "syscon"; + reg = <0xe0108000 0x8000>; }; pinctrl0: pinctrl@e0200000 { @@ -228,43 +225,36 @@ status = "disabled"; }; - audio-subsystem { - compatible = "samsung,s5pv210-audss", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clk_audss: clock-controller@eee10000 { - compatible = "samsung,s5pv210-audss-clock"; - reg = <0xeee10000 0x1000>; - clock-names = "hclk", "xxti", - "fout_epll", - "sclk_audio0"; - clocks = <&clocks DOUT_HCLKP>, <&xxti>, - <&clocks FOUT_EPLL>, - <&clocks SCLK_AUDIO0>; - #clock-cells = <1>; - }; + clk_audss: clock-controller@eee10000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xeee10000 0x1000>; + clock-names = "hclk", "xxti", + "fout_epll", + "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + #clock-cells = <1>; + }; - i2s0: i2s@eee30000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0xeee30000 0x1000>; - interrupt-parent = <&vic2>; - interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; - clock-names = "iis", - "i2s_opclk0", - "i2s_opclk1"; - clocks = <&clk_audss CLK_I2S>, - <&clk_audss CLK_I2S>, - <&clk_audss CLK_DOUT_AUD_BUS>; - samsung,idma-addr = <0xc0010000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - #sound-dai-cells = <0>; - status = "disabled"; - }; + i2s0: i2s@eee30000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0xeee30000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <16>; + dma-names = "rx", "tx", "tx-sec"; + dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + clock-names = "iis", + "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, + <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + samsung,idma-addr = <0xc0010000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <0>; + status = "disabled"; }; i2s1: i2s@e2100000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index fb0d1b252dc8..92df0fcf2bf4 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1363,7 +1363,7 @@ 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ - 0x0003ff00 0x8002a800 0x00000000 /* pioD */ + 0xb003ff00 0x8002a800 0x00000000 /* pioD */ 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ >; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index cce9e50acf68..b648b1b253c5 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -652,7 +652,7 @@ timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xffd01000 0x100>; + reg = <0xffd00100 0x100>; clocks = <&l4_sys_free_clk>; clock-names = "timer"; }; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 118135d75899..4e4166d96b26 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -53,7 +53,7 @@ }; gmac: eth@e0800000 { - compatible = "st,spear600-gmac"; + compatible = "snps,dwmac-3.40a"; reg = <0xe0800000 0x8000>; interrupts = <23 22>; interrupt-names = "macirq", "eth_wake_irq"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index aa90f319309b..b8bbc8c18799 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -137,7 +137,7 @@ trips { cpu_alert0: cpu_alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 13d4e6185275..c70d1ec02957 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -180,8 +180,9 @@ nvidia,pins = "ata", "atb", "atc", "atd", "ate", "cdev1", "cdev2", "dap1", "dtb", "gma", "gmb", "gmc", "gmd", "gme", "gpu7", - "gpv", "i2cp", "pta", "rm", "slxa", - "slxk", "spia", "spib", "uac"; + "gpv", "i2cp", "irrx", "irtx", "pta", + "rm", "slxa", "slxk", "spia", "spib", + "uac"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; @@ -206,7 +207,7 @@ conf_ddc { nvidia,pins = "ddc", "dta", "dtd", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", - "sdc"; + "sdc", "uad", "uca"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; @@ -216,10 +217,9 @@ "lvp0", "owc", "sdb"; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - conf_irrx { - nvidia,pins = "irrx", "irtx", "sdd", "spic", - "spie", "spih", "uaa", "uab", "uad", - "uca", "ucb"; + conf_sdd { + nvidia,pins = "sdd", "spic", "spie", "spih", + "uaa", "uab", "ucb"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 3279bf1a17a1..9bedd2478787 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -93,16 +93,15 @@ #size-cells = <1>; ranges; - vic: intc@10140000 { + vic: interrupt-controller@10140000 { compatible = "arm,versatile-vic"; interrupt-controller; #interrupt-cells = <1>; reg = <0x10140000 0x1000>; - clear-mask = <0xffffffff>; valid-mask = <0xffffffff>; }; - sic: intc@10003000 { + sic: interrupt-controller@10003000 { compatible = "arm,versatile-sic"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 33a8eb28374e..3a23164c2c2d 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -6,7 +6,7 @@ amba { /* The Versatile PB is using more SIC IRQ lines than the AB */ - sic: intc@10003000 { + sic: interrupt-controller@10003000 { clear-mask = <0xffffffff>; /* * Valid interrupt lines mask according to diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 2a78d10896cf..356ad251e2ed 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -101,10 +101,9 @@ mcp2515can: can@0 { compatible = "microchip,mcp2515"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can_int>; reg = <0>; clocks = <&clk16m>; + /* pinctrl is set in iomuxc from hoggrp-0 */ interrupt-parent = <&gpio1>; interrupts = <11 GPIO_ACTIVE_LOW>; spi-max-frequency = <10000000>; @@ -205,12 +204,6 @@ &iomuxc { vf610-colibri { - pinctrl_can_int: can_int { - fsl,pins = < - VF610_PAD_PTB21__GPIO_43 0x22ed - >; - }; - pinctrl_gpiokeys: gpiokeys { fsl,pins = < VF610_PAD_PTB19__GPIO_41 0x218d |