diff options
Diffstat (limited to 'arch/arm/boot')
48 files changed, 500 insertions, 479 deletions
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 5be33a2d59a9..bdc1d5af03d2 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -31,7 +31,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -46,14 +46,12 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' endif @@ -78,14 +76,12 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @$(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' PHONY += initrd install zinstall uinstall initrd: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 522f8d511adc..faacd52370d2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -763,6 +763,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olimex-som-evb.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ + sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-orangepi.dtb \ sun7i-a20-orangepi-mini.dtb \ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index af18c4738bef..98748c61ed99 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -840,7 +840,6 @@ ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -863,7 +862,7 @@ status = "disabled"; davinci_mdio: mdio@4a101000 { - compatible = "ti,davinci_mdio"; + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "davinci_mdio"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index e7b53ef923a1..0fadae5396e1 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -665,7 +665,6 @@ ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -675,7 +674,7 @@ syscon = <&scm_conf>; davinci_mdio: mdio@4a101000 { - compatible = "ti,am4372-mdio","ti,davinci_mdio"; + compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; reg = <0x4a101000 0x100>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index d82dd6e3f9b1..5687d6b4da60 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -418,7 +418,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>; tps@24 { compatible = "ti,tps65218"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 81d6c3033b51..c4d04c5293b9 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -86,7 +86,7 @@ led@3 { label = "beagle-x15:usr3"; gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ide-disk"; + linux,default-trigger = "disk-activity"; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index b01a5948cdd0..0e63b9dff6e7 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -60,10 +60,26 @@ tps659038_pmic { compatible = "ti,tps659038-pmic"; + + smps12-in-supply = <&vmain>; + smps3-in-supply = <&vmain>; + smps45-in-supply = <&vmain>; + smps6-in-supply = <&vmain>; + smps7-in-supply = <&vmain>; + smps8-in-supply = <&vmain>; + smps9-in-supply = <&vmain>; + ldo1-in-supply = <&vmain>; + ldo2-in-supply = <&vmain>; + ldo3-in-supply = <&vmain>; + ldo4-in-supply = <&vmain>; + ldo9-in-supply = <&vmain>; + ldoln-in-supply = <&vmain>; + ldousb-in-supply = <&vmain>; + ldortc-in-supply = <&vmain>; + regulators { smps12_reg: smps12 { /* VDD_MPU */ - vin-supply = <&vmain>; regulator-name = "smps12"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -73,7 +89,6 @@ smps3_reg: smps3 { /* VDD_DDR EMIF1 EMIF2 */ - vin-supply = <&vmain>; regulator-name = "smps3"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; @@ -84,7 +99,6 @@ smps45_reg: smps45 { /* VDD_DSPEVE on AM572 */ /* VDD_IVA + VDD_DSP on AM571 */ - vin-supply = <&vmain>; regulator-name = "smps45"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -94,7 +108,6 @@ smps6_reg: smps6 { /* VDD_GPU */ - vin-supply = <&vmain>; regulator-name = "smps6"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; @@ -104,7 +117,6 @@ smps7_reg: smps7 { /* VDD_CORE */ - vin-supply = <&vmain>; regulator-name = "smps7"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -115,13 +127,11 @@ smps8_reg: smps8 { /* 5728 - VDD_IVAHD */ /* 5718 - N.C. test point */ - vin-supply = <&vmain>; regulator-name = "smps8"; }; smps9_reg: smps9 { /* VDD_3_3D */ - vin-supply = <&vmain>; regulator-name = "smps9"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -132,7 +142,6 @@ ldo1_reg: ldo1 { /* VDDSHV8 - VSDMMC */ /* NOTE: on rev 1.3a, data supply */ - vin-supply = <&vmain>; regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -142,7 +151,6 @@ ldo2_reg: ldo2 { /* VDDSH18V */ - vin-supply = <&vmain>; regulator-name = "ldo2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -152,7 +160,6 @@ ldo3_reg: ldo3 { /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */ - vin-supply = <&vmain>; regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -162,7 +169,6 @@ ldo4_reg: ldo4 { /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/ - vin-supply = <&vmain>; regulator-name = "ldo4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -174,7 +180,6 @@ ldo9_reg: ldo9 { /* VDD_RTC */ - vin-supply = <&vmain>; regulator-name = "ldo9"; regulator-min-microvolt = <840000>; regulator-max-microvolt = <1160000>; @@ -184,7 +189,6 @@ ldoln_reg: ldoln { /* VDDA_1V8_PLL */ - vin-supply = <&vmain>; regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -194,7 +198,6 @@ ldousb_reg: ldousb { /* VDDA_3V_USB: VDDA_USBHS33 */ - vin-supply = <&vmain>; regulator-name = "ldousb"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -204,7 +207,6 @@ ldortc_reg: ldortc { /* VDDA_RTC */ - vin-supply = <&vmain>; regulator-name = "ldortc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 8450944b28e6..22f7a13e20b4 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -58,8 +58,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 8d7b35a4b5f1..c3bf7d23f136 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -223,6 +223,11 @@ brcm,nand-has-wp; }; + rng: rng@33000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x33000 0x14>; + }; + ccbtimer0: timer@34000 { compatible = "arm,sp804"; reg = <0x34000 0x1000>; @@ -283,6 +288,48 @@ <0x30028 0x04>, <0x3f408 0x04>; }; + + sata_phy: sata_phy@40100 { + compatible = "brcm,iproc-nsp-sata-phy"; + reg = <0x40100 0x340>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + sata: ahci@41000 { + compatible = "brcm,bcm-nsp-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x41000 0x1000>, <0x40020 0x1c>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + phy-names = "sata-phy"; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + phy-names = "sata-phy"; + }; + }; }; pcie0: pcie@18012000 { diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index e298450b49b2..2d8422632b2b 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -68,6 +68,18 @@ status = "okay"; }; +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index cbc17b0794b1..4128fa91823c 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -93,6 +93,10 @@ }; }; +&mmc1 { + status = "disabled"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pins>; @@ -101,6 +105,10 @@ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; }; +&mmc3 { + status = "disabled"; +}; + &pincntl { sd1_pins: pinmux_sd1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 5d4313fd5a46..3f184863e0c5 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -45,6 +45,14 @@ phy-mode = "rgmii"; }; +&mmc1 { + status = "disabled"; +}; + +&mmc2 { + status = "disabled"; +}; + &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&sd2_pins>; @@ -53,6 +61,7 @@ dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */ &edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */ dma-names = "tx", "rx"; + non-removable; }; &pincntl { diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index a6e0aebc617b..68e412c9863c 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -509,7 +509,6 @@ ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 60680a1b4f1d..d9bfb94a2992 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1546,6 +1546,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x37c>; /* device IO registers */ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 4 0>; + dma-names = "rxtx"; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; @@ -1721,7 +1723,6 @@ ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -1756,7 +1757,7 @@ status = "disabled"; davinci_mdio: mdio@48485000 { - compatible = "ti,davinci_mdio"; + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "davinci_mdio"; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 0a8a5eee5dd0..8987b3e180a1 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -84,8 +84,8 @@ reg = <0x58000000 0x80>, <0x58004054 0x4>, <0x58004300 0x20>, - <0x58005054 0x4>, - <0x58005300 0x20>; + <0x58009054 0x4>, + <0x58009300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 419d59da1751..fadbea744e1a 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -242,7 +242,7 @@ hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; ports { - port0 { + port { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -485,13 +485,20 @@ edid-emulation = <5>; ports { - port0 { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port1 { + port@1 { + reg = <1>; + bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index fe5742356e98..fe4e0915c0c6 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -164,7 +164,7 @@ hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { - port0 { + port { dp_out: endpoint { remote-endpoint = <&bridge_in>; }; @@ -626,13 +626,20 @@ use-external-pwm; ports { - port0 { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { remote-endpoint = <&panel_in>; }; }; - port1 { + port@1 { + reg = <1>; + bridge_in: endpoint { remote-endpoint = <&dp_out>; }; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 6cebaa6b8833..214bb1506b53 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -37,7 +37,7 @@ status = "okay"; rtc: rtc@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 984c71b85561..ca1cc5eca80f 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -102,7 +102,7 @@ status = "okay"; rtc: m41t00@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index 87a7fc709c2d..d259f57bfd98 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -84,7 +84,7 @@ }; rtc: rtc@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 364578d707a5..905907325f3b 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -282,7 +282,7 @@ }; rtc: m41t62@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index 1f2ca60d8b3d..2c661add0cc0 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -26,7 +26,7 @@ blue-sata { label = "ns2:blue:sata"; gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ide-disk"; + linux,default-trigger = "disk-activity"; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index f5c8c0dd41dc..1e9a72100a45 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -129,7 +129,7 @@ disk { label = "topkick:yellow:disk"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ide-disk"; + linux,default-trigger = "disk-activity"; }; system2 { label = "topkick:red:system"; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 4f536bb1f002..8bceb8d343f6 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -80,6 +80,7 @@ pmic@32 { compatible = "ricoh,rn5t618"; reg = <0x32>; + system-power-controller; regulators { }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 76056ba92ced..ed449827c3d3 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -85,7 +85,7 @@ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 41f5d386f21f..f4f2ce46d681 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -188,6 +188,7 @@ vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; bus-width = <4>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 6af81549ff81..667f96245729 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -194,6 +194,12 @@ OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */ >; }; + + mmc1_wp_pins: pinmux_mmc1_cd_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */ + >; + }; }; &i2c3 { @@ -250,3 +256,8 @@ }; }; }; + +&mmc1 { + pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>; + wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */ +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index cac9a8bc9b2c..2a6078a8422c 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -300,7 +300,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ @@ -312,7 +312,7 @@ modem_pins: pinmux_modem { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index a00ca761675d..927b17fc4ed8 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -97,7 +97,7 @@ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ @@ -110,7 +110,7 @@ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ - OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ @@ -120,7 +120,7 @@ modem_pins1: pinmux_modem_core1_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ + OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ >; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index f19170bdcc1f..c29b41dc7b95 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -98,7 +98,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ >; }; @@ -107,7 +107,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; @@ -125,7 +125,7 @@ pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ - OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ >; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index f73934e6bbfe..5196113202a2 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -14,6 +14,29 @@ display0 = &hdmi0; }; + vmain: fixedregulator-vmain { + compatible = "regulator-fixed"; + regulator-name = "vmain"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vsys_cobra: fixedregulator-vsys_cobra { + compatible = "regulator-fixed"; + regulator-name = "vsys_cobra"; + vin-supply = <&vmain>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdds_1v8_main: fixedregulator-vdds_1v8_main { + compatible = "regulator-fixed"; + regulator-name = "vdds_1v8_main"; + vin-supply = <&smps7_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vmmcsd_fixed: fixedregulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -309,7 +332,7 @@ wlcore_irq_pin: pinmux_wlcore_irq_pin { pinctrl-single,pins = < - OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ >; }; }; @@ -409,6 +432,26 @@ ti,ldo6-vibrator; + smps123-in-supply = <&vsys_cobra>; + smps45-in-supply = <&vsys_cobra>; + smps6-in-supply = <&vsys_cobra>; + smps7-in-supply = <&vsys_cobra>; + smps8-in-supply = <&vsys_cobra>; + smps9-in-supply = <&vsys_cobra>; + smps10_out2-in-supply = <&vsys_cobra>; + smps10_out1-in-supply = <&vsys_cobra>; + ldo1-in-supply = <&vsys_cobra>; + ldo2-in-supply = <&vsys_cobra>; + ldo3-in-supply = <&vdds_1v8_main>; + ldo4-in-supply = <&vdds_1v8_main>; + ldo5-in-supply = <&vsys_cobra>; + ldo6-in-supply = <&vdds_1v8_main>; + ldo7-in-supply = <&vsys_cobra>; + ldo8-in-supply = <&vsys_cobra>; + ldo9-in-supply = <&vmmcsd_fixed>; + ldoln-in-supply = <&vsys_cobra>; + ldousb-in-supply = <&vsys_cobra>; + regulators { smps123_reg: smps123 { /* VDD_OPP_MPU */ @@ -601,7 +644,8 @@ pinctrl-0 = <&twl6040_pins>; interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ + + /* audpwron gpio defined in the board specific dts */ vio-supply = <&smps7_reg>; v2v1-supply = <&smps9_reg>; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 46ecb1dd3b5c..f75ce02fb398 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -35,6 +35,22 @@ }; }; +/* LDO4 is VPP1 - ball AD9 */ +&ldo4_reg { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; +}; + +/* + * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33, + * VDDA_HDMI - ball AN25 + */ +&ldo7_reg { + status = "okay"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + &omap5_pmx_core { i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < @@ -52,3 +68,13 @@ <&gpio7 3 0>; /* 195, SDA */ }; +&twl6040 { + ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */ + OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ + >; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 60b3fbb3bf07..a51e60518eb6 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -51,3 +51,13 @@ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ }; + +&twl6040 { + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ +}; + +&twl6040_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 906bb81cfd67..74a9b6c394f5 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -253,7 +253,8 @@ }; timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; + compatible = "qcom,kpss-timer", + "qcom,kpss-wdt-apq8064", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, <1 3 0x301>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index a520ef5c9a94..b7a24af8f47b 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -258,7 +258,7 @@ }; watchdog@b017000 { - compatible = "qcom,kpss-standalone"; + compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; reg = <0xb017000 0x40>; clocks = <&sleep_clk>; timeout-sec = <10>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 2601a907947b..2e375576ffd0 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -122,7 +122,8 @@ }; timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; + compatible = "qcom,kpss-timer", + "qcom,kpss-wdt-ipq8064", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, <1 3 0x301>, diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index da05e28a81a7..288f56e0ccf5 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -87,7 +87,8 @@ }; timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; + compatible = "qcom,kpss-timer", + "qcom,kpss-wdt-msm8960", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, <1 3 0x301>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 7fa932fcd08e..cd33f0170890 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -539,8 +539,9 @@ gmac: ethernet@ff290000 { compatible = "rockchip,rk3288-gmac"; reg = <0xff290000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; rockchip,grf = <&grf>; clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index c885d2b153ca..353d0e5ec83b 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -237,7 +237,7 @@ }; usb1: ohci@00400000 { - compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + compatible = "atmel,sama5d2-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 1c4fc275c661..94000cbe576b 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -623,6 +623,22 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, <33 IRQ_TYPE_LEVEL_HIGH>; }; + + emac0-rx-ecc@ff8c0800 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0800 0x400>; + altr,ecc-parent = <&gmac0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>, + <36 IRQ_TYPE_LEVEL_HIGH>; + }; + + emac0-tx-ecc@ff8c0c00 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0c00 0x400>; + altr,ecc-parent = <&gmac0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>, + <37 IRQ_TYPE_LEVEL_HIGH>; + }; }; rst: rstmgr@ffd05000 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index e1a61f20873f..d79853775061 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -52,7 +52,7 @@ status = "okay"; rtc: rtc@68 { - compatible = "stm,m41t82"; + compatible = "st,m41t82"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index a3601e4c0a2e..b844473601d2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -136,6 +136,7 @@ &gmac1 { status = "okay"; phy-mode = "rgmii"; + phy-handle = <&phy1>; snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>; snps,reset-active-low; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index ad8ba10764a3..d294e82447a2 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -24,18 +24,21 @@ compatible = "shared-dma-pool"; reg = <0x40000000 0x01000000>; no-map; + status = "disabled"; }; gp1_reserved: rproc@41000000 { compatible = "shared-dma-pool"; reg = <0x41000000 0x01000000>; no-map; + status = "disabled"; }; audio_reserved: rproc@42000000 { compatible = "shared-dma-pool"; reg = <0x42000000 0x01000000>; no-map; + status = "disabled"; }; dmu_reserved: rproc@43000000 { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 68b479b8772c..73c133f5e79c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -176,8 +176,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 360adfb1e9ca..d6ad6196a768 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -135,8 +135,6 @@ ®_dc1sw { regulator-name = "vcc-lcd-usb2"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; }; ®_dc5ldo { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 3c37f7e2b079..fdf9fdbda267 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -42,8 +42,10 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/sun8i-h3-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun8i-h3-ccu.h> / { interrupt-parent = <&gic>; @@ -104,191 +106,6 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - /* dummy clock until actually implemented */ - pll5: pll5_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll5"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - pll6d2: pll6d2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll6 0>; - clock-output-names = "pll6d2"; - }; - - /* dummy clock until pll6 can be reused */ - pll8: pll8_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <1>; - clock-output-names = "pll8"; - }; - - cpu: cpu_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - ahb2: ahb2_clk@01c2005c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-h3-ahb2-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&ahb1>, <&pll6d2>; - clock-output-names = "ahb2"; - }; - - apb1: apb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - apb2: apb2_clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - bus_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-h3-bus-gates-clk"; - reg = <0x01c20060 0x14>; - clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; - clock-names = "ahb1", "ahb2", "apb1", "apb2"; - clock-indices = <5>, <6>, <8>, - <9>, <10>, <13>, - <14>, <17>, <18>, - <19>, <20>, - <21>, <23>, - <24>, <25>, - <26>, <27>, - <28>, <29>, - <30>, <31>, <32>, - <35>, <36>, <37>, - <40>, <41>, <43>, - <44>, <52>, <53>, - <54>, <64>, - <65>, <69>, <72>, - <76>, <77>, <78>, - <96>, <97>, <98>, - <112>, <113>, - <114>, <115>, - <116>, <128>, <135>; - clock-output-names = "bus_ce", "bus_dma", "bus_mmc0", - "bus_mmc1", "bus_mmc2", "bus_nand", - "bus_sdram", "bus_gmac", "bus_ts", - "bus_hstimer", "bus_spi0", - "bus_spi1", "bus_otg", - "bus_otg_ehci0", "bus_ehci1", - "bus_ehci2", "bus_ehci3", - "bus_otg_ohci0", "bus_ohci1", - "bus_ohci2", "bus_ohci3", "bus_ve", - "bus_lcd0", "bus_lcd1", "bus_deint", - "bus_csi", "bus_tve", "bus_hdmi", - "bus_de", "bus_gpu", "bus_msgbox", - "bus_spinlock", "bus_codec", - "bus_spdif", "bus_pio", "bus_ths", - "bus_i2s0", "bus_i2s1", "bus_i2s2", - "bus_i2c0", "bus_i2c1", "bus_i2c2", - "bus_uart0", "bus_uart1", - "bus_uart2", "bus_uart3", - "bus_scr", "bus_ephy", "bus_dbg"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun8i-h3-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&osc24M>; - clock-output-names = "usb_phy0", "usb_phy1", - "usb_phy2", "usb_phy3", - "usb_ohci0", "usb_ohci1", - "usb_ohci2", "usb_ohci3"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5>; - clock-output-names = "mbus"; - }; - apb0: apb0_clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -327,23 +144,23 @@ compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 6>; - resets = <&ahb_rst 6>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&bus_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 8>; + resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -354,15 +171,15 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&bus_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 9>; + resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -373,15 +190,15 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&bus_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 10>; + resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -401,18 +218,18 @@ "pmu1", "pmu2", "pmu3"; - clocks = <&usb_clk 8>, - <&usb_clk 9>, - <&usb_clk 10>, - <&usb_clk 11>; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; clock-names = "usb0_phy", "usb1_phy", "usb2_phy", "usb3_phy"; - resets = <&usb_clk 0>, - <&usb_clk 1>, - <&usb_clk 2>, - <&usb_clk 3>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset", @@ -425,8 +242,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 25>, <&bus_gates 29>; - resets = <&ahb_rst 25>, <&ahb_rst 29>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -436,9 +253,9 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 29>, <&bus_gates 25>, - <&usb_clk 17>; - resets = <&ahb_rst 29>, <&ahb_rst 25>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -448,8 +265,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 26>, <&bus_gates 30>; - resets = <&ahb_rst 26>, <&ahb_rst 30>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -459,9 +276,9 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 30>, <&bus_gates 26>, - <&usb_clk 18>; - resets = <&ahb_rst 30>, <&ahb_rst 26>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -471,8 +288,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1d000 0x100>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 27>, <&bus_gates 31>; - resets = <&ahb_rst 27>, <&ahb_rst 31>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; phy-names = "usb"; status = "disabled"; @@ -482,20 +299,29 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1d400 0x100>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 31>, <&bus_gates 27>, - <&usb_clk 19>; - resets = <&ahb_rst 31>, <&ahb_rst 27>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; phy-names = "usb"; status = "disabled"; }; + ccu: clock@01c20000 { + compatible = "allwinner,sun8i-h3-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl@01c20800 { compatible = "allwinner,sun8i-h3-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 69>; + clocks = <&ccu CLK_BUS_PIO>; gpio-controller; #gpio-cells = <3>; interrupt-controller; @@ -549,24 +375,6 @@ }; }; - ahb_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; - - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; - }; - timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; @@ -587,8 +395,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 112>; - resets = <&apb2_rst 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; dma-names = "rx", "tx"; status = "disabled"; @@ -600,8 +408,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 113>; - resets = <&apb2_rst 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; dma-names = "rx", "tx"; status = "disabled"; @@ -613,8 +421,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 114>; - resets = <&apb2_rst 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -626,8 +434,8 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 115>; - resets = <&apb2_rst 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; dma-names = "rx", "tx"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index c6a67a964fe3..0350002849d5 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1843,7 +1843,7 @@ ldo5_reg: ldo5 { regulator-name = "vddio_sdmmc,avdd_vdac"; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -1914,6 +1914,7 @@ sdhci@78000000 { status = "okay"; + vqmmc-supply = <&ldo5_reg>; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 6c60b7f91104..5c1fcab4a6f7 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -85,187 +85,199 @@ reg = <1>; #address-cells = <1>; #size-cells = <0>; + + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + switch0port5: port@5 { + reg = <5>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch1port6 + &switch2port9>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; }; mdio_mux_2: mdio@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; - }; - - mdio_mux_4: mdio@4 { - reg = <4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio_mux_8: mdio@8 { - reg = <8>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - dsa { - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - dsa,ethernet = <&fec1>; - dsa,mii-bus = <&mdio_mux_1>; - - /* 6352 - Primary - 7 ports */ - switch0: switch@0-0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x00 0>; - eeprom-length = <512>; - port@0 { + switch1: switch1@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - switch0port5: port@5 { - reg = <5>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch1port6 - &switch2port9>; - - fixed-link { - speed = <1000>; - full-duplex; + dsa,member = <0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan3"; + phy-handle = <&switch1phy0>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-handle = <&switch1phy1>; + }; + + port@2 { + reg = <2>; + label = "lan5"; + phy-handle = <&switch1phy2>; + }; + + switch1port5: port@5 { + reg = <5>; + label = "dsa"; + link = <&switch2port9>; + phy-mode = "rgmii-txid"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch1port6: port@6 { + reg = <6>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch0port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - - fixed-link { - speed = <100>; - full-duplex; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + }; + switch1phy1: switch1phy0@1 { + reg = <1>; + }; + switch1phy2: switch1phy0@2 { + reg = <2>; + }; }; }; - }; - /* 6352 - Secondary - 7 ports */ - switch1: switch@0-1 { + mdio_mux_4: mdio@4 { #address-cells = <1>; #size-cells = <0>; - reg = <0x00 1>; - eeprom-length = <512>; - mii-bus = <&mdio_mux_2>; + reg = <4>; - port@0 { + switch2: switch2@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - label = "lan3"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - }; - - port@2 { - reg = <2>; - label = "lan5"; - }; - - switch1port5: port@5 { - reg = <5>; - label = "dsa"; - link = <&switch2port9>; - phy-mode = "rgmii-txid"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch1port6: port@6 { - reg = <6>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch0port5>; - - fixed-link { - speed = <1000>; - full-duplex; + dsa,member = <0 2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan6"; + }; + + port@1 { + reg = <1>; + label = "lan7"; + }; + + port@2 { + reg = <2>; + label = "lan8"; + }; + + port@3 { + reg = <3>; + label = "optical3"; + fixed-link { + speed = <1000>; + full-duplex; + link-gpios = <&gpio6 2 + GPIO_ACTIVE_HIGH>; + }; + }; + + port@4 { + reg = <4>; + label = "optical4"; + fixed-link { + speed = <1000>; + full-duplex; + link-gpios = <&gpio6 3 + GPIO_ACTIVE_HIGH>; + }; + }; + + switch2port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch1port5 + &switch0port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; }; - /* 6185 - 10 ports */ - switch2: switch@0-2 { + mdio_mux_8: mdio@8 { + reg = <8>; #address-cells = <1>; #size-cells = <0>; - reg = <0x00 2>; - mii-bus = <&mdio_mux_4>; - - port@0 { - reg = <0>; - label = "lan6"; - }; - - port@1 { - reg = <1>; - label = "lan7"; - }; - - port@2 { - reg = <2>; - label = "lan8"; - }; - - port@3 { - reg = <3>; - label = "optical3"; - - fixed-link { - speed = <1000>; - full-duplex; - link-gpios = <&gpio6 2 - GPIO_ACTIVE_HIGH>; - }; - }; - - port@4 { - reg = <4>; - label = "optical4"; - - fixed-link { - speed = <1000>; - full-duplex; - link-gpios = <&gpio6 3 - GPIO_ACTIVE_HIGH>; - }; - }; - - switch2port9: port@9 { - reg = <9>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch1port5 - &switch0port5>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; }; }; |