diff options
Diffstat (limited to 'arch/arm/mach-davinci/board-da830-evm.c')
| -rw-r--r-- | arch/arm/mach-davinci/board-da830-evm.c | 55 |
1 files changed, 21 insertions, 34 deletions
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index df1f4091a8ae..5db09014f55a 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -18,7 +18,6 @@ #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/platform_data/at24.h> -#include <linux/mfd/da8xx-cfgchip.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> @@ -28,6 +27,7 @@ #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/spi-davinci.h> #include <linux/platform_data/usb-davinci.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -107,43 +107,24 @@ static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) static __init void da830_evm_usb_init(void) { - u32 cfgchip2; int ret; - /* - * Set up USB clock/mode in the CFGCHIP2 register. - * FYI: CFGCHIP2 is 0x0000ef00 initially. - */ - cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* USB2.0 PHY reference clock is 24 MHz */ - cfgchip2 &= ~CFGCHIP2_REFFREQ_MASK; - cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; - - /* - * Select internal reference clock for USB 2.0 PHY - * and use it as a clock source for USB 1.1 PHY - * (this is the default setting anyway). - */ - cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX; - cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX; - - /* - * We have to override VBUS/ID signals when MUSB is configured into the - * host-only mode -- ID pin will float if no cable is connected, so the - * controller won't be able to drive VBUS thinking that it's a B-device. - * Otherwise, we want to use the OTG mode and enable VBUS comparators. - */ - cfgchip2 &= ~CFGCHIP2_OTGMODE_MASK; -#ifdef CONFIG_USB_MUSB_HOST - cfgchip2 |= CFGCHIP2_FORCE_HOST; -#else - cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; -#endif + /* USB_REFCLKIN is not used. */ + ret = da8xx_register_usb20_phy_clk(false); + if (ret) + pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n", + __func__, ret); + + ret = da8xx_register_usb11_phy_clk(false); + if (ret) + pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", + __func__, ret); - __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); + ret = da8xx_register_usb_phy(); + if (ret) + pr_warn("%s: USB PHY registration failed: %d\n", + __func__, ret); - /* USB_REFCLKIN is not used. */ ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); if (ret) pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret); @@ -589,6 +570,10 @@ static __init void da830_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; + ret = da8xx_register_cfgchip(); + if (ret) + pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret); + ret = da830_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); @@ -648,6 +633,8 @@ static __init void da830_evm_init(void) ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info)); if (ret) pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret); + + regulator_has_full_constraints(); } #ifdef CONFIG_SERIAL_8250_CONSOLE |