summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci')
-rw-r--r--arch/arm/mach-davinci/Kconfig6
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c4
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c2
-rw-r--r--arch/arm/mach-davinci/cp_intc.c4
-rw-r--r--arch/arm/mach-davinci/cpufreq.c2
-rw-r--r--arch/arm/mach-davinci/da850.c2
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c12
-rw-r--r--arch/arm/mach-davinci/dm355.c2
-rw-r--r--arch/arm/mach-davinci/dm644x.c2
-rw-r--r--arch/arm/mach-davinci/gpio.c49
-rw-r--r--arch/arm/mach-davinci/include/mach/cputype.h2
-rw-r--r--arch/arm/mach-davinci/include/mach/debug-macro.S13
-rw-r--r--arch/arm/mach-davinci/include/mach/serial.h2
-rw-r--r--arch/arm/mach-davinci/irq.c6
14 files changed, 57 insertions, 51 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 32f147998cd9..c0deacae778d 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM
depends on ARCH_DAVINCI_DM644x
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify the whether the board used
for development is a DM644x EVM
@@ -72,6 +73,7 @@ config MACH_SFFSDR
depends on ARCH_DAVINCI_DM644x
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
@@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM
select MACH_DAVINCI_DM6467TEVM
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
@@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM
depends on ARCH_DAVINCI_DM365
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Configure this option to specify whether the board used
for development is a DM365 EVM
@@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM
select GPIO_PCF857X
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
@@ -205,6 +210,7 @@ config MACH_MITYOMAPL138
depends on ARCH_DAVINCI_DA850
select MISC_DEVICES
select EEPROM_AT24
+ select I2C
help
Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
System on Module. Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2aa79c54f98e..606a6f27ed6c 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -29,7 +29,7 @@
#include <mach/mux.h>
#include <mach/spi.h>
-#define MITYOMAPL138_PHY_ID "0:03"
+#define MITYOMAPL138_PHY_ID ""
#define FACTORY_CONFIG_MAGIC 0x012C0138
#define FACTORY_CONFIG_VERSION 0x00010001
@@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = {
static struct platform_device mityomapl138_nandflash_device = {
.name = "davinci_nand",
- .id = 0,
+ .id = 1,
.dev = {
.platform_data = &mityomapl138_nandflash_data,
},
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 6c389ff1020e..3e7be2de96de 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -11,7 +11,7 @@
* DM644X-EVM board. It has:
* DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
* USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
- * Additionaly realtime clock, IR remote control receiver,
+ * Additionally realtime clock, IR remote control receiver,
* IR Blaster based on MSP430 (firmware although is different
* from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
* with PATA interface, two muxed red-green leds.
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 9abc80a86a22..f83152d643c5 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -167,9 +167,9 @@ void __init cp_intc_init(void)
/* Set up genirq dispatching for cp_intc */
for (i = 0; i < num_irq; i++) {
- set_irq_chip(i, &cp_intc_irq_chip);
+ irq_set_chip(i, &cp_intc_irq_chip);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- set_irq_handler(i, handle_edge_irq);
+ irq_set_handler(i, handle_edge_irq);
}
/* Enable global interrupt */
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 4a68c2b1ec11..0a95be1512bb 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -167,7 +167,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy)
/*
* Time measurement across the target() function yields ~1500-1800us
* time taken with no drivers on notification list.
- * Setting the latency to 2000 us to accomodate addition of drivers
+ * Setting the latency to 2000 us to accommodate addition of drivers
* to pre/post change notification list.
*/
policy->cpuinfo.transition_latency = 2000 * 1000;
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 68fe4c289d77..b95b9196deed 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1123,7 +1123,7 @@ void __init da850_init(void)
* This helps keeping the peripherals on this domain insulated
* from CPU frequency changes caused by DVFS. The firmware sets
* both PLL0 and PLL1 to the same frequency so, there should not
- * be any noticible change even in non-DVFS use cases.
+ * be any noticeable change even in non-DVFS use cases.
*/
da850_set_async3_src(1);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 625d4b66718b..58a02dc7b15a 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -39,7 +39,8 @@
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_I2C1_BASE 0x01e28000
#define DA8XX_SPI0_BASE 0x01c41000
-#define DA8XX_SPI1_BASE 0x01f0e000
+#define DA830_SPI1_BASE 0x01e12000
+#define DA850_SPI1_BASE 0x01f0e000
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
@@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = {
static struct resource da8xx_spi1_resources[] = {
[0] = {
- .start = DA8XX_SPI1_BASE,
- .end = DA8XX_SPI1_BASE + SZ_4K - 1,
+ .start = DA830_SPI1_BASE,
+ .end = DA830_SPI1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
da8xx_spi_pdata[instance].num_chipselect = len;
+ if (instance == 1 && cpu_is_davinci_da850()) {
+ da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
+ da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
+ }
+
return platform_device_register(&da8xx_spi_device[instance]);
}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 76364d1345df..a3a94e9c9378 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -314,7 +314,7 @@ static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why cant' this be disabled? */
+ .usecount = 1, /* REVISIT: why can't this be disabled? */
};
static struct clk timer3_clk = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 9a2376b3137c..4c82c2716293 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -274,7 +274,7 @@ static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
- .usecount = 1, /* REVISIT: why cant' this be disabled? */
+ .usecount = 1, /* REVISIT: why can't this be disabled? */
};
static struct clk_lookup dm644x_clks[] = {
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 20d66e5e4663..a0b838894ac9 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -62,7 +62,7 @@ static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
{
struct davinci_gpio_regs __iomem *g;
- g = (__force struct davinci_gpio_regs __iomem *)get_irq_chip_data(irq);
+ g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
return g;
}
@@ -208,7 +208,7 @@ pure_initcall(davinci_gpio_setup);
static void gpio_irq_disable(struct irq_data *d)
{
struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_data(d);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
__raw_writel(mask, &g->clr_falling);
__raw_writel(mask, &g->clr_rising);
@@ -217,8 +217,8 @@ static void gpio_irq_disable(struct irq_data *d)
static void gpio_irq_enable(struct irq_data *d)
{
struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_data(d);
- unsigned status = irq_desc[d->irq].status;
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
+ unsigned status = irqd_get_trigger_type(d);
status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
if (!status)
@@ -233,21 +233,11 @@ static void gpio_irq_enable(struct irq_data *d)
static int gpio_irq_type(struct irq_data *d, unsigned trigger)
{
struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_data(d);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
- irq_desc[d->irq].status &= ~IRQ_TYPE_SENSE_MASK;
- irq_desc[d->irq].status |= trigger;
-
- /* don't enable the IRQ if it's currently disabled */
- if (irq_desc[d->irq].depth == 0) {
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
- ? &g->set_falling : &g->clr_falling);
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
- ? &g->set_rising : &g->clr_rising);
- }
return 0;
}
@@ -256,6 +246,7 @@ static struct irq_chip gpio_irqchip = {
.irq_enable = gpio_irq_enable,
.irq_disable = gpio_irq_disable,
.irq_set_type = gpio_irq_type,
+ .flags = IRQCHIP_SET_TYPE_MASKED,
};
static void
@@ -285,7 +276,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
status >>= 16;
/* now demux them to the right lowlevel handler */
- n = (int)get_irq_data(irq);
+ n = (int)irq_get_handler_data(irq);
while (status) {
res = ffs(status);
n += res;
@@ -323,7 +314,7 @@ static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
{
struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_data(d);
+ u32 mask = (u32) irq_data_get_irq_handler_data(d);
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
@@ -395,7 +386,7 @@ static int __init davinci_gpio_irq_setup(void)
/* AINTC handles mask/unmask; GPIO handles triggering */
irq = bank_irq;
- gpio_irqchip_unbanked = *get_irq_desc_chip(irq_to_desc(irq));
+ gpio_irqchip_unbanked = *irq_get_chip(irq);
gpio_irqchip_unbanked.name = "GPIO-AINTC";
gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
@@ -406,10 +397,10 @@ static int __init davinci_gpio_irq_setup(void)
/* set the direct IRQs up to use that irqchip */
for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
- set_irq_chip(irq, &gpio_irqchip_unbanked);
- set_irq_data(irq, (void *) __gpio_mask(gpio));
- set_irq_chip_data(irq, (__force void *) g);
- irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH;
+ irq_set_chip(irq, &gpio_irqchip_unbanked);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
}
goto done;
@@ -430,15 +421,15 @@ static int __init davinci_gpio_irq_setup(void)
__raw_writel(~0, &g->clr_rising);
/* set up all irqs in this bank */
- set_irq_chained_handler(bank_irq, gpio_irq_handler);
- set_irq_chip_data(bank_irq, (__force void *) g);
- set_irq_data(bank_irq, (void *) irq);
+ irq_set_chained_handler(bank_irq, gpio_irq_handler);
+ irq_set_chip_data(bank_irq, (__force void *)g);
+ irq_set_handler_data(bank_irq, (void *)irq);
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
- set_irq_chip(irq, &gpio_irqchip);
- set_irq_chip_data(irq, (__force void *) g);
- set_irq_data(irq, (void *) __gpio_mask(gpio));
- set_irq_handler(irq, handle_simple_irq);
+ irq_set_chip(irq, &gpio_irqchip);
+ irq_set_chip_data(irq, (__force void *)g);
+ irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+ irq_set_handler(irq, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index cea6b8972043..957fb87e832e 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -4,7 +4,7 @@
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* Defines the cpu_is_*() macros for runtime detection of DaVinci
- * device type. In addtion, if support for a given device is not
+ * device type. In addition, if support for a given device is not
* compiled in to the kernel, the macros return 0 so that
* resulting code can be optimized out.
*
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 9f1befc5ac38..f8b7ea4f6235 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -24,6 +24,9 @@
#define UART_SHIFT 2
+#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
@@ -34,7 +37,7 @@ davinci_uart_virt: .word 0
/* Use davinci_uart_phys/virt if already configured */
10: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
- ldreq \rp, =__virt_to_phys(davinci_uart_phys)
+ ldreq \rp, =davinci_uart_v2p(davinci_uart_phys)
ldrne \rp, =davinci_uart_phys
add \rv, \rp, #4 @ davinci_uart_virt
ldr \rp, [\rp, #0]
@@ -48,18 +51,18 @@ davinci_uart_virt: .word 0
tst \rp, #1 @ MMU enabled?
/* Copy uart phys address from decompressor uart info */
- ldreq \rv, =__virt_to_phys(davinci_uart_phys)
+ ldreq \rv, =davinci_uart_v2p(davinci_uart_phys)
ldrne \rv, =davinci_uart_phys
ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+ ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #0]
str \rp, [\rv]
/* Copy uart virt address from decompressor uart info */
- ldreq \rv, =__virt_to_phys(davinci_uart_virt)
+ ldreq \rv, =davinci_uart_v2p(davinci_uart_virt)
ldrne \rv, =davinci_uart_virt
ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+ ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
ldr \rp, [\rp, #4]
str \rp, [\rv]
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 8051110b8ac3..c9e6ce185a66 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -22,7 +22,7 @@
*
* This area sits just below the page tables (see arch/arm/kernel/head.S).
*/
-#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8)
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 5e05c9b64e1f..e6269a6e0014 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -154,11 +154,11 @@ void __init davinci_irq_init(void)
/* set up genirq dispatch for ARM INTC */
for (i = 0; i < davinci_soc_info.intc_irq_num; i++) {
- set_irq_chip(i, &davinci_irq_chip_0);
+ irq_set_chip(i, &davinci_irq_chip_0);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
if (i != IRQ_TINT1_TINT34)
- set_irq_handler(i, handle_edge_irq);
+ irq_set_handler(i, handle_edge_irq);
else
- set_irq_handler(i, handle_level_irq);
+ irq_set_handler(i, handle_level_irq);
}
}
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-02 21:10:17 +0000