diff options
Diffstat (limited to 'arch/arm/mach-mx25/serial.c')
| -rw-r--r-- | arch/arm/mach-mx25/serial.c | 332 |
1 files changed, 332 insertions, 0 deletions
diff --git a/arch/arm/mach-mx25/serial.c b/arch/arm/mach-mx25/serial.c new file mode 100644 index 000000000000..c2310d77c6b0 --- /dev/null +++ b/arch/arm/mach-mx25/serial.c @@ -0,0 +1,332 @@ +/* + * Copyright (C) 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +/*! + * @file mach-mx25/serial.c + * + * @brief This file contains the UART initiliazation. + * + * @ingroup MSL_MX25 + */ +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <mach/hardware.h> +#include <mach/mxc_uart.h> +#include "serial.h" +#include "board-mx25_3stack.h" + +#if defined(CONFIG_SERIAL_MXC) || defined(CONFIG_SERIAL_MXC_MODULE) + +/*! + * This is an array where each element holds information about a UART port, + * like base address of the UART, interrupt numbers etc. This structure is + * passed to the serial_core.c file. Based on which UART is used, the core file + * passes back the appropriate port structure as an argument to the control + * functions. + */ +static uart_mxc_port mxc_ports[] = { + [0] = { + .port = { + .iotype = SERIAL_IO_MEM, + .fifosize = 32, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .ints_muxed = UART1_MUX_INTS, + .mode = UART1_MODE, + .ir_mode = UART1_IR, + .enabled = UART1_ENABLED, + .hardware_flow = UART1_HW_FLOW, + .cts_threshold = UART1_UCR4_CTSTL, + .dma_enabled = UART1_DMA_ENABLE, + .dma_rxbuf_size = UART1_DMA_RXBUFSIZE, + .rx_threshold = UART1_UFCR_RXTL, + .tx_threshold = UART1_UFCR_TXTL, + .dma_tx_id = MXC_DMA_UART1_TX, + .dma_rx_id = MXC_DMA_UART1_RX, + .rxd_mux = MXC_UART_RXDMUX, + }, + [1] = { + .port = { + .iotype = SERIAL_IO_MEM, + .fifosize = 32, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .ints_muxed = UART2_MUX_INTS, + .mode = UART2_MODE, + .ir_mode = UART2_IR, + .enabled = UART2_ENABLED, + .hardware_flow = UART2_HW_FLOW, + .cts_threshold = UART2_UCR4_CTSTL, + .dma_enabled = UART2_DMA_ENABLE, + .dma_rxbuf_size = UART2_DMA_RXBUFSIZE, + .rx_threshold = UART2_UFCR_RXTL, + .tx_threshold = UART2_UFCR_TXTL, + .dma_tx_id = MXC_DMA_UART2_TX, + .dma_rx_id = MXC_DMA_UART2_RX, + .rxd_mux = MXC_UART_IR_RXDMUX, + }, +#if UART3_ENABLED == 1 + [2] = { + .port = { + .iotype = SERIAL_IO_MEM, + .fifosize = 32, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 2, + }, + .ints_muxed = UART3_MUX_INTS, + .mode = UART3_MODE, + .ir_mode = UART3_IR, + .enabled = UART3_ENABLED, + .hardware_flow = UART3_HW_FLOW, + .cts_threshold = UART3_UCR4_CTSTL, + .dma_enabled = UART3_DMA_ENABLE, + .dma_rxbuf_size = UART3_DMA_RXBUFSIZE, + .rx_threshold = UART3_UFCR_RXTL, + .tx_threshold = UART3_UFCR_TXTL, + .dma_tx_id = MXC_DMA_UART3_TX, + .dma_rx_id = MXC_DMA_UART3_RX, + .rxd_mux = MXC_UART_RXDMUX, + }, +#endif +#if UART4_ENABLED == 1 + [3] = { + .port = { + .iotype = SERIAL_IO_MEM, + .fifosize = 32, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 3, + }, + .ints_muxed = UART4_MUX_INTS, + .mode = UART4_MODE, + .ir_mode = UART4_IR, + .enabled = UART4_ENABLED, + .hardware_flow = UART4_HW_FLOW, + .cts_threshold = UART4_UCR4_CTSTL, + .dma_enabled = UART4_DMA_ENABLE, + .dma_rxbuf_size = UART4_DMA_RXBUFSIZE, + .rx_threshold = UART4_UFCR_RXTL, + .tx_threshold = UART4_UFCR_TXTL, + .dma_tx_id = MXC_DMA_UART4_TX, + .dma_rx_id = MXC_DMA_UART4_RX, + .rxd_mux = MXC_UART_RXDMUX, + }, +#endif +#if UART5_ENABLED == 1 + [4] = { + .port = { + .iotype = SERIAL_IO_MEM, + .fifosize = 32, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 4, + }, + .ints_muxed = UART5_MUX_INTS, + .mode = UART5_MODE, + .ir_mode = UART5_IR, + .enabled = UART5_ENABLED, + .hardware_flow = UART5_HW_FLOW, + .cts_threshold = UART5_UCR4_CTSTL, + .dma_enabled = UART5_DMA_ENABLE, + .dma_rxbuf_size = UART5_DMA_RXBUFSIZE, + .rx_threshold = UART5_UFCR_RXTL, + .tx_threshold = UART5_UFCR_TXTL, + .dma_tx_id = MXC_DMA_UART5_TX, + .dma_rx_id = MXC_DMA_UART5_RX, + .rxd_mux = MXC_UART_RXDMUX, + }, +#endif +}; + +static struct resource mxc_uart_resources1[] = { + { + .start = MX25_UART1_BASE_ADDR, + .end = MX25_UART1_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, + { + .start = UART1_INT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART1_INT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART1_INT3, + .flags = IORESOURCE_IRQ, + }, + +}; + +static struct platform_device mxc_uart_device1 = { + .name = "mxcintuart", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_uart_resources1), + .resource = mxc_uart_resources1, + .dev = { + .platform_data = &mxc_ports[0], + }, +}; + +static struct resource mxc_uart_resources2[] = { + { + .start = MX25_UART2_BASE_ADDR, + .end = MX25_UART2_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, + { + .start = UART2_INT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART2_INT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART2_INT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device2 = { + .name = "mxcintuart", + .id = 1, + .num_resources = ARRAY_SIZE(mxc_uart_resources2), + .resource = mxc_uart_resources2, + .dev = { + .platform_data = &mxc_ports[1], + }, +}; + +#if UART3_ENABLED == 1 +static struct resource mxc_uart_resources3[] = { + { + .start = MX25_UART3_BASE_ADDR, + .end = MX25_UART3_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, + { + .start = UART3_INT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART3_INT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART3_INT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device3 = { + .name = "mxcintuart", + .id = 2, + .num_resources = ARRAY_SIZE(mxc_uart_resources3), + .resource = mxc_uart_resources3, + .dev = { + .platform_data = &mxc_ports[2], + }, +}; +#endif +#if UART4_ENABLED == 1 +static struct resource mxc_uart_resources4[] = { + { + .start = MX25_UART4_BASE_ADDR, + .end = MX25_UART4_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, + { + .start = UART4_INT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART4_INT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART4_INT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device4 = { + .name = "mxcintuart", + .id = 3, + .num_resources = ARRAY_SIZE(mxc_uart_resources4), + .resource = mxc_uart_resources4, + .dev = { + .platform_data = &mxc_ports[3], + }, +}; +#endif +#if UART5_ENABLED == 1 +static struct resource mxc_uart_resources5[] = { + { + .start = MX25_UART5_BASE_ADDR, + .end = MX25_UART5_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, + { + .start = UART5_INT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART5_INT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART5_INT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device5 = { + .name = "mxcintuart", + .id = 4, + .num_resources = ARRAY_SIZE(mxc_uart_resources5), + .resource = mxc_uart_resources5, + .dev = { + .platform_data = &mxc_ports[4], + }, +}; +#endif + +static int __init mxc_init_uart(void) +{ + /* Register all the MXC UART platform device structures */ + platform_device_register(&mxc_uart_device1); + platform_device_register(&mxc_uart_device2); + +#if UART3_ENABLED == 1 + platform_device_register(&mxc_uart_device3); +#endif /* UART3_ENABLED */ +#if UART4_ENABLED == 1 + platform_device_register(&mxc_uart_device4); +#endif /* UART4_ENABLED */ +#if UART5_ENABLED == 1 + platform_device_register(&mxc_uart_device5); +#endif /* UART5_ENABLED */ + + return 0; +} + +#else +static int __init mxc_init_uart(void) +{ + return 0; +} +#endif + +arch_initcall(mxc_init_uart); |