diff options
Diffstat (limited to 'arch/arm/mach-mx5/usb_dr.c')
-rw-r--r-- | arch/arm/mach-mx5/usb_dr.c | 314 |
1 files changed, 314 insertions, 0 deletions
diff --git a/arch/arm/mach-mx5/usb_dr.c b/arch/arm/mach-mx5/usb_dr.c new file mode 100644 index 000000000000..d0dba3a3bf38 --- /dev/null +++ b/arch/arm/mach-mx5/usb_dr.c @@ -0,0 +1,314 @@ +/* + * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <mach/arc_otg.h> +#include <mach/hardware.h> +#include <asm/delay.h> +#include "usb.h" +static int usbotg_init_ext(struct platform_device *pdev); +static void usbotg_uninit_ext(struct fsl_usb2_platform_data *pdata); +static void usbotg_clock_gate(bool on); + +static struct clk *usb_phy1_clk; +static struct clk *usb_oh3_clk; +static struct clk *usb_ahb_clk; +static void usbotg_wakeup_event_clear(void); +extern int clk_get_usecount(struct clk *clk); + +/* Beginning of Common operation for DR port */ + +/* + * platform data structs + * - Which one to use is determined by CONFIG options in usb.h + * - operating_mode plugged at run time + */ +static struct fsl_usb2_platform_data dr_utmi_config = { + .name = "DR", + .platform_init = usbotg_init_ext, + .platform_uninit = usbotg_uninit_ext, + .phy_mode = FSL_USB2_PHY_UTMI_WIDE, + .power_budget = 500, /* 500 mA max power */ + .gpio_usb_active = gpio_usbotg_hs_active, + .gpio_usb_inactive = gpio_usbotg_hs_inactive, + .usb_clock_for_pm = usbotg_clock_gate, + .transceiver = "utmi", +}; + +/* Platform data for wakeup operation */ +static struct fsl_usb2_wakeup_platform_data dr_wakeup_config = { + .name = "DR wakeup", + .usb_clock_for_pm = usbotg_clock_gate, + .usb_wakeup_exhandle = usbotg_wakeup_event_clear, +}; +/* Notes: configure USB clock*/ +static int usbotg_init_ext(struct platform_device *pdev) +{ + struct clk *usb_clk; + + /* the usb_ahb_clk will be enabled in usb_otg_init */ + usb_ahb_clk = clk_get(NULL, "usb_ahb_clk"); + + usb_clk = clk_get(NULL, "usboh3_clk"); + clk_enable(usb_clk); + usb_oh3_clk = usb_clk; + + usb_clk = clk_get(NULL, "usb_phy1_clk"); + clk_enable(usb_clk); + usb_phy1_clk = usb_clk; + + return usbotg_init(pdev); +} + +static void usbotg_uninit_ext(struct fsl_usb2_platform_data *pdata) +{ + clk_disable(usb_phy1_clk); + clk_put(usb_phy1_clk); + + clk_disable(usb_oh3_clk); + clk_put(usb_oh3_clk); + + /* usb_ahb_clk will be disabled at usb_common.c */ + usbotg_uninit(pdata); + clk_put(usb_ahb_clk); +} + +/* Below two macros are used at otg mode to indicate usb mode*/ +#define ENABLED_BY_HOST (0x1 << 0) +#define ENABLED_BY_DEVICE (0x1 << 1) +static u32 wakeup_irq_enable_src; /* only useful at otg mode */ +static void __wakeup_irq_enable(bool on, int source) + { + /* otg host and device share the OWIE bit, only when host and device + * all enable the wakeup irq, we can enable the OWIE bit + */ + if (on) { +#ifdef CONFIG_USB_OTG + wakeup_irq_enable_src |= source; + if (wakeup_irq_enable_src == (ENABLED_BY_HOST | ENABLED_BY_DEVICE)) { + USBCTRL |= UCTRL_OWIE; + USB_PHY_CTR_FUNC |= USB_UTMI_PHYCTRL_CONF2; + } +#else + USBCTRL |= UCTRL_OWIE; + USB_PHY_CTR_FUNC |= USB_UTMI_PHYCTRL_CONF2; +#endif + } else { + USB_PHY_CTR_FUNC &= ~USB_UTMI_PHYCTRL_CONF2; + USBCTRL &= ~UCTRL_OWIE; + wakeup_irq_enable_src &= ~source; + /* The interrupt must be disabled for at least 3 clock + * cycles of the standby clock(32k Hz) , that is 0.094 ms*/ + udelay(100); + } +} + +static u32 low_power_enable_src; /* only useful at otg mode */ +static void __phy_lowpower_suspend(bool enable, int source) +{ + if (enable) { + low_power_enable_src |= source; +#ifdef CONFIG_USB_OTG + if (low_power_enable_src == (ENABLED_BY_HOST | ENABLED_BY_DEVICE)) { + pr_debug("phy lowpower enabled\n"); + UOG_PORTSC1 |= PORTSC_PHCD; + } +#else + UOG_PORTSC1 |= PORTSC_PHCD; +#endif + } else { + pr_debug("phy lowpower disable\n"); + UOG_PORTSC1 &= ~PORTSC_PHCD; + low_power_enable_src &= ~source; + } +} + +static void usbotg_clock_gate(bool on) +{ + pr_debug("%s: on is %d\n", __func__, on); + if (on) { + clk_enable(usb_ahb_clk); + clk_enable(usb_oh3_clk); + clk_enable(usb_phy1_clk); + } else { + clk_disable(usb_phy1_clk); + clk_disable(usb_oh3_clk); + clk_disable(usb_ahb_clk); + } + pr_debug("usb_ahb_ref_count:%d, usb_phy_clk1_ref_count:%d\n", clk_get_usecount(usb_ahb_clk), clk_get_usecount(usb_phy1_clk)); +} + +void mx5_set_otghost_vbus_func(driver_vbus_func driver_vbus) +{ + dr_utmi_config.platform_driver_vbus = driver_vbus; +} + +/* The wakeup operation for DR port, it will clear the wakeup irq status + * and re-enable the wakeup + */ +static void usbotg_wakeup_event_clear(void) +{ + int wakeup_req = USBCTRL & UCTRL_OWIR; + + if (wakeup_req != 0) { + printk(KERN_INFO "Unknown wakeup.(OTGSC 0x%x)\n", UOG_OTGSC); + /* Disable OWIE to clear OWIR, wait 3 clock + * cycles of standly clock(32KHz) + */ + USBCTRL &= ~UCTRL_OWIE; + udelay(100); + USBCTRL |= UCTRL_OWIE; + } +} +/* End of Common operation for DR port */ + + +#ifdef CONFIG_USB_EHCI_ARC_OTG +extern void fsl_usb_recover_hcd(struct platform_device *pdev); +/* Beginning of host related operation for DR port */ +static void _host_wakeup_enable(struct fsl_usb2_platform_data *pdata, bool enable) +{ + __wakeup_irq_enable(enable, ENABLED_BY_HOST); + /* host only care the ID change wakeup event */ + if (enable) { + pr_debug("host wakeup enable\n"); + USBCTRL_HOST2 |= UCTRL_H2OIDWK_EN; + } else { + pr_debug("host wakeup disable\n"); + USBCTRL_HOST2 &= ~UCTRL_H2OIDWK_EN; + /* The interrupt must be disabled for at least 3 clock + * cycles of the standby clock(32k Hz) , that is 0.094 ms*/ + udelay(100); + } +} + +static void _host_phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, bool enable) +{ + __phy_lowpower_suspend(enable, ENABLED_BY_HOST); +} + +static enum usb_wakeup_event _is_host_wakeup(struct fsl_usb2_platform_data *pdata) +{ + int wakeup_req = USBCTRL & UCTRL_OWIR; + int otgsc = UOG_OTGSC; + + /* if ID change sts, it is a host wakeup event */ + if (wakeup_req && (otgsc & OTGSC_IS_USB_ID)) { + printk(KERN_INFO "otg host ID wakeup\n"); + /* if host ID wakeup, we must clear the b session change sts */ + UOG_OTGSC = otgsc & (~OTGSC_IS_USB_ID); + return WAKEUP_EVENT_ID; + } + if (wakeup_req && (!(otgsc & OTGSC_STS_USB_ID))) { + printk(KERN_INFO "otg host Remote wakeup\n"); + return WAKEUP_EVENT_DPDM; + } + + return WAKEUP_EVENT_INVALID; +} + +static void host_wakeup_handler(struct fsl_usb2_platform_data *pdata) +{ + _host_wakeup_enable(pdata, false); + _host_phy_lowpower_suspend(pdata, false); + fsl_usb_recover_hcd(&mxc_usbdr_host_device); +} +/* End of host related operation for DR port */ +#endif /* CONFIG_USB_EHCI_ARC_OTG */ + + +#ifdef CONFIG_USB_GADGET_ARC +/* Beginning of device related operation for DR port */ +static void _device_wakeup_enable(struct fsl_usb2_platform_data *pdata, bool enable) +{ + __wakeup_irq_enable(enable, ENABLED_BY_DEVICE); + /* if udc is not used by any gadget, we can not enable the vbus wakeup */ + if (!pdata->port_enables) { + USBCTRL_HOST2 &= ~UCTRL_H2OVBWK_EN; + return; + } + if (enable) { + pr_debug("device wakeup enable\n"); + USBCTRL_HOST2 |= UCTRL_H2OVBWK_EN; + } else { + pr_debug("device wakeup disable\n"); + USBCTRL_HOST2 &= ~UCTRL_H2OVBWK_EN; + } +} + +static void _device_phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, bool enable) +{ + __phy_lowpower_suspend(enable, ENABLED_BY_DEVICE); +} + +static enum usb_wakeup_event _is_device_wakeup(struct fsl_usb2_platform_data *pdata) +{ + int wakeup_req = USBCTRL & UCTRL_OWIR; + + if (wakeup_req && (UOG_OTGSC & OTGSC_STS_USB_ID) && (UOG_OTGSC & OTGSC_IS_B_SESSION_VALID)) { + printk(KERN_INFO "otg udc wakeup\n"); + return WAKEUP_EVENT_VBUS; + } + return WAKEUP_EVENT_INVALID; + +} + +static void device_wakeup_handler(struct fsl_usb2_platform_data *pdata) +{ + _device_wakeup_enable(pdata, false); + _device_phy_lowpower_suspend(pdata, false); +} + +/* end of device related operation for DR port */ +#endif /* CONFIG_USB_GADGET_ARC */ + + +void __init mx5_usb_dr_init(void) +{ +#ifdef CONFIG_USB_OTG + /* wake_up_enalbe is useless, just for usb_register_remote_wakeup execution*/ + dr_utmi_config.wake_up_enable = _device_wakeup_enable; + dr_utmi_config.operating_mode = FSL_USB2_DR_OTG; + dr_utmi_config.wakeup_pdata = &dr_wakeup_config; + platform_device_add_data(&mxc_usbdr_otg_device, &dr_utmi_config, sizeof(dr_utmi_config)); + platform_device_register(&mxc_usbdr_otg_device); + dr_wakeup_config.usb_pdata[0] = mxc_usbdr_otg_device.dev.platform_data; +#endif +#ifdef CONFIG_USB_EHCI_ARC_OTG + dr_utmi_config.operating_mode = DR_HOST_MODE; + dr_utmi_config.wake_up_enable = _host_wakeup_enable; + dr_utmi_config.phy_lowpower_suspend = _host_phy_lowpower_suspend; + dr_utmi_config.is_wakeup_event = _is_host_wakeup; + dr_utmi_config.wakeup_pdata = &dr_wakeup_config; + dr_utmi_config.wakeup_handler = host_wakeup_handler; + platform_device_add_data(&mxc_usbdr_host_device, &dr_utmi_config, sizeof(dr_utmi_config)); + platform_device_register(&mxc_usbdr_host_device); + dr_wakeup_config.usb_pdata[1] = mxc_usbdr_host_device.dev.platform_data; +#endif +#ifdef CONFIG_USB_GADGET_ARC + dr_utmi_config.operating_mode = DR_UDC_MODE; + dr_utmi_config.wake_up_enable = _device_wakeup_enable; + dr_utmi_config.phy_lowpower_suspend = _device_phy_lowpower_suspend; + dr_utmi_config.is_wakeup_event = _is_device_wakeup; + dr_utmi_config.wakeup_pdata = &dr_wakeup_config; + dr_utmi_config.wakeup_handler = device_wakeup_handler; + platform_device_add_data(&mxc_usbdr_udc_device, &dr_utmi_config, sizeof(dr_utmi_config)); + platform_device_register(&mxc_usbdr_udc_device); + dr_wakeup_config.usb_pdata[2] = mxc_usbdr_udc_device.dev.platform_data; +#endif + mxc_register_device(&mxc_usbdr_wakeup_device, &dr_wakeup_config); +} |