diff options
Diffstat (limited to 'arch/arm/mach-mx5/usb_h2.c')
-rw-r--r-- | arch/arm/mach-mx5/usb_h2.c | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/arch/arm/mach-mx5/usb_h2.c b/arch/arm/mach-mx5/usb_h2.c new file mode 100644 index 000000000000..516c62dea814 --- /dev/null +++ b/arch/arm/mach-mx5/usb_h2.c @@ -0,0 +1,198 @@ +/* + * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <mach/arc_otg.h> +#include "usb.h" +#include "iomux.h" +#include "mx51_pins.h" + +#ifdef CONFIG_USB_EHCI_ARC +extern void fsl_usb_recover_hcd(struct platform_device *pdev); +#else +static void fsl_usb_recover_hcd(struct platform_device *pdev) +{; } +#endif +/* + * USB Host2 HS port + */ +static int gpio_usbh2_active(void) +{ + /* Set USBH2_STP to GPIO and toggle it */ + mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_GPIO); + gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_A26), "eim_a26"); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A26), 0); + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A26), 1); + + msleep(100); + + return 0; +} + +static void gpio_usbh2_inactive(void) +{ + gpio_free(IOMUX_TO_GPIO(MX51_PIN_EIM_A26)); + mxc_free_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_GPIO); +} + +static void _wake_up_enable(struct fsl_usb2_platform_data *pdata, bool enable) +{ + printk(KERN_DEBUG "host2, %s, enable is %d\n", __func__, enable); + if (enable) + USBCTRL_HOST2 |= UCTRL_H2WIE; + else { + USBCTRL_HOST2 &= ~UCTRL_H2WIE; + /* The interrupt must be disabled for at least 3 + * cycles of the standby clock(32k Hz) , that is 0.094 ms*/ + udelay(100); + } +} + +static void _phy_lowpower_suspend(struct fsl_usb2_platform_data *pdata, bool enable) +{ + printk(KERN_DEBUG "host2, %s, enable is %d\n", __func__, enable); + if (enable) { + UH2_PORTSC1 |= PORTSC_PHCD; + } else { + UH2_PORTSC1 &= ~PORTSC_PHCD; + } +} + +static void fsl_usbh2_clock_gate(bool on) +{ + struct clk *usb_clk; + if (on) { + usb_clk = clk_get(NULL, "usb_ahb_clk"); + clk_enable(usb_clk); + clk_put(usb_clk); + + usb_clk = clk_get(NULL, "usboh3_clk"); + clk_enable(usb_clk); + clk_put(usb_clk); + } else { + usb_clk = clk_get(NULL, "usb_ahb_clk"); + clk_disable(usb_clk); + clk_put(usb_clk); + + usb_clk = clk_get(NULL, "usboh3_clk"); + clk_disable(usb_clk); + clk_put(usb_clk); + } +} + +static enum usb_wakeup_event _is_usbh2_wakeup(struct fsl_usb2_platform_data *pdata) +{ + int wakeup_req = USBCTRL & UCTRL_H2WIR; + + if (wakeup_req) + return !WAKEUP_EVENT_INVALID; + + return WAKEUP_EVENT_INVALID; +} + +static void h2_wakeup_handler(struct fsl_usb2_platform_data *pdata) +{ + _wake_up_enable(pdata, false); + _phy_lowpower_suspend(pdata, false); + fsl_usb_recover_hcd(&mxc_usbh2_device); +} + +static void usbh2_wakeup_event_clear(void) +{ + int wakeup_req = USBCTRL & UCTRL_H2WIR; + + if (wakeup_req != 0) { + printk(KERN_INFO "Unknown wakeup.(OTGSC 0x%x)\n", UOG_OTGSC); + /* Disable H2WIE to clear H2WIR, wait 3 clock + * cycles of standly clock(32KHz) + */ + USBCTRL &= ~UCTRL_H2WIE; + udelay(100); + USBCTRL |= UCTRL_H2WIE; + } +} +static int fsl_usb_host_init_ext(struct platform_device *pdev) +{ + int ret = 0; + struct clk *usb_clk; + + usb_clk = clk_get(NULL, "usboh3_clk"); + clk_enable(usb_clk); + clk_put(usb_clk); + + /* on mx53, there is a hardware limitation that when switch the host2's clk mode + * ,usb phy1 clk must be on, after finish switching this clk can be off */ + if (cpu_is_mx53()) { + usb_clk = clk_get(NULL, "usb_phy1_clk"); + clk_enable(usb_clk); + clk_put(usb_clk); + } + + ret = fsl_usb_host_init(pdev); + + if (cpu_is_mx53()) { + usb_clk = clk_get(NULL, "usb_phy1_clk"); + clk_disable(usb_clk); + clk_put(usb_clk); + } + + /* setback USBH2_STP to be function */ + mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT2); + + return ret; +} + +static void fsl_usb_host_uninit_ext(struct fsl_usb2_platform_data *pdata) +{ + struct clk *usb_clk; + + usb_clk = clk_get(NULL, "usboh3_clk"); + clk_disable(usb_clk); + clk_put(usb_clk); + + fsl_usb_host_uninit(pdata); +} + +static struct fsl_usb2_platform_data usbh2_config = { + .name = "Host 2", + .platform_init = fsl_usb_host_init_ext, + .platform_uninit = fsl_usb_host_uninit_ext, + .operating_mode = FSL_USB2_MPH_HOST, + .phy_mode = FSL_USB2_PHY_ULPI, + .power_budget = 500, /* 500 mA max power */ + .wake_up_enable = _wake_up_enable, + .usb_clock_for_pm = fsl_usbh2_clock_gate, + .phy_lowpower_suspend = _phy_lowpower_suspend, + .gpio_usb_active = gpio_usbh2_active, + .gpio_usb_inactive = gpio_usbh2_inactive, + .is_wakeup_event = _is_usbh2_wakeup, + .wakeup_handler = h2_wakeup_handler, + .transceiver = "isp1504", +}; +static struct fsl_usb2_wakeup_platform_data usbh2_wakeup_config = { + .name = "USBH2 wakeup", + .usb_clock_for_pm = fsl_usbh2_clock_gate, + .usb_pdata = {&usbh2_config, NULL, NULL}, + .usb_wakeup_exhandle = usbh2_wakeup_event_clear, +}; +void __init mx5_usbh2_init(void) +{ + usbh2_config.wakeup_pdata = &usbh2_wakeup_config; + mxc_register_device(&mxc_usbh2_device, &usbh2_config); + mxc_register_device(&mxc_usbh2_wakeup_device, &usbh2_wakeup_config); +} |