summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1/leds-osk.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/leds-osk.c')
-rw-r--r--arch/arm/mach-omap1/leds-osk.c80
1 files changed, 1 insertions, 79 deletions
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 026685ed461a..754383dde807 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -1,11 +1,9 @@
/*
* linux/arch/arm/mach-omap1/leds-osk.c
*
- * LED driver for OSK, and optionally Mistral QVGA, boards
+ * LED driver for OSK with optional Mistral QVGA board
*/
#include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/i2c/tps65010.h>
#include <asm/hardware.h>
#include <asm/leds.h>
@@ -20,49 +18,11 @@
#define LED_STATE_CLAIMED (1 << 1)
static u8 led_state;
-#define GREEN_LED (1 << 0) /* TPS65010 LED1 */
-#define AMBER_LED (1 << 1) /* TPS65010 LED2 */
-#define RED_LED (1 << 2) /* TPS65010 GPIO2 */
#define TIMER_LED (1 << 3) /* Mistral board */
#define IDLE_LED (1 << 4) /* Mistral board */
static u8 hw_led_state;
-/* TPS65010 leds are changed using i2c -- from a task context.
- * Using one of these for the "idle" LED would be impractical...
- */
-#define TPS_LEDS (GREEN_LED | RED_LED | AMBER_LED)
-
-static u8 tps_leds_change;
-
-static void tps_work(struct work_struct *unused)
-{
- for (;;) {
- u8 leds;
-
- local_irq_disable();
- leds = tps_leds_change;
- tps_leds_change = 0;
- local_irq_enable();
-
- if (!leds)
- break;
-
- /* careful: the set_led() value is on/off/blink */
- if (leds & GREEN_LED)
- tps65010_set_led(LED1, !!(hw_led_state & GREEN_LED));
- if (leds & AMBER_LED)
- tps65010_set_led(LED2, !!(hw_led_state & AMBER_LED));
-
- /* the gpio led doesn't have that issue */
- if (leds & RED_LED)
- tps65010_set_gpio_out_value(GPIO2,
- !(hw_led_state & RED_LED));
- }
-}
-
-static DECLARE_WORK(work, tps_work);
-
#ifdef CONFIG_OMAP_OSK_MISTRAL
/* For now, all system indicators require the Mistral board, since that
@@ -112,7 +72,6 @@ void osk_leds_event(led_event_t evt)
case led_stop:
led_state &= ~LED_STATE_ENABLED;
hw_led_state = 0;
- /* NOTE: work may still be pending!! */
break;
case led_claim:
@@ -145,48 +104,11 @@ void osk_leds_event(led_event_t evt)
#endif /* CONFIG_OMAP_OSK_MISTRAL */
- /* "green" == tps LED1 (leftmost, normally power-good)
- * works only with DC adapter, not on battery power!
- */
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GREEN_LED;
- break;
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GREEN_LED;
- break;
-
- /* "amber" == tps LED2 (middle) */
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= AMBER_LED;
- break;
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~AMBER_LED;
- break;
-
- /* "red" == LED on tps gpio3 (rightmost) */
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= RED_LED;
- break;
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~RED_LED;
- break;
-
default:
break;
}
leds ^= hw_led_state;
- leds &= TPS_LEDS;
- if (leds && (led_state & LED_STATE_CLAIMED)) {
- tps_leds_change |= leds;
- schedule_work(&work);
- }
done:
local_irq_restore(flags);