diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-overo.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-overo.c | 160 |
1 files changed, 100 insertions, 60 deletions
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 5748b5d06c23..f6d384111911 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -72,6 +72,9 @@ #define OVERO_SMSC911X2_CS 4 #define OVERO_SMSC911X2_GPIO 65 +/* whether to register LCD35 instead of LCD43 */ +static bool overo_use_lcd35; + #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) @@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; } #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = -1, +static struct connector_atv_platform_data overo_tv_pdata = { + .name = "tv", + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device overo_dvi_device = { - .name = "dvi", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device overo_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &overo_tv_pdata, }; -static struct omap_dss_device overo_tv_device = { - .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +static const struct display_timing overo_lcd43_videomode = { + .pixelclock = { 0, 9200000, 0 }, + + .hactive = { 0, 480, 0 }, + .hfront_porch = { 0, 8, 0 }, + .hback_porch = { 0, 4, 0 }, + .hsync_len = { 0, 41, 0 }, + + .vactive = { 0, 272, 0 }, + .vfront_porch = { 0, 4, 0 }, + .vback_porch = { 0, 2, 0 }, + .vsync_len = { 0, 10, 0 }, + + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; -static struct panel_generic_dpi_data lcd43_panel = { - .name = "samsung_lte430wq_f0c", - .num_gpios = 2, - .gpios = { - OVERO_GPIO_LCD_EN, - OVERO_GPIO_LCD_BL - }, +static struct panel_dpi_platform_data overo_lcd43_pdata = { + .name = "lcd43", + .source = "dpi.0", + + .data_lines = 24, + + .display_timing = &overo_lcd43_videomode, + + .enable_gpio = OVERO_GPIO_LCD_EN, + .backlight_gpio = OVERO_GPIO_LCD_BL, }; -static struct omap_dss_device overo_lcd43_device = { - .name = "lcd43", - .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", - .data = &lcd43_panel, - .phy.dpi.data_lines = 24, +static struct platform_device overo_lcd43_device = { + .name = "panel-dpi", + .id = 0, + .dev.platform_data = &overo_lcd43_pdata, }; -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) -static struct panel_generic_dpi_data lcd35_panel = { - .num_gpios = 2, - .gpios = { - OVERO_GPIO_LCD_EN, - OVERO_GPIO_LCD_BL - }, +static struct connector_dvi_platform_data overo_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device overo_lcd35_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "lcd35", - .driver_name = "lgphilips_lb035q02_panel", - .phy.dpi.data_lines = 24, - .data = &lcd35_panel, +static struct platform_device overo_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &overo_dvi_connector_pdata, }; -#endif -static struct omap_dss_device *overo_dss_devices[] = { - &overo_dvi_device, - &overo_tv_device, -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) - &overo_lcd35_device, -#endif - &overo_lcd43_device, +static struct encoder_tfp410_platform_data overo_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, +}; + +static struct platform_device overo_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &overo_tfp410_pdata, }; static struct omap_dss_board_info overo_dss_data = { - .num_devices = ARRAY_SIZE(overo_dss_devices), - .devices = overo_dss_devices, - .default_device = &overo_dvi_device, + .default_display_name = "lcd43", }; +static void __init overo_display_init(void) +{ + omap_display_init(&overo_dss_data); + + if (!overo_use_lcd35) + platform_device_register(&overo_lcd43_device); + platform_device_register(&overo_tfp410_device); + platform_device_register(&overo_dvi_connector_device); + platform_device_register(&overo_tv_connector_device); +} + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -408,24 +427,41 @@ static int __init overo_i2c_init(void) return 0; } +static struct panel_lb035q02_platform_data overo_lcd35_pdata = { + .name = "lcd35", + .source = "dpi.0", + + .data_lines = 24, + + .enable_gpio = OVERO_GPIO_LCD_EN, + .backlight_gpio = OVERO_GPIO_LCD_BL, +}; + +/* + * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The + * selection is done based on the overo_use_lcd35 field. If new SPI + * devices are added here, extra work is needed to make only the lgphilips panel + * affected by the overo_use_lcd35 field. + */ static struct spi_board_info overo_spi_board_info[] __initdata = { -#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ - defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) { - .modalias = "lgphilips_lb035q02_panel-spi", + .modalias = "panel_lgphilips_lb035q02", .bus_num = 1, .chip_select = 1, .max_speed_hz = 500000, .mode = SPI_MODE_3, + .platform_data = &overo_lcd35_pdata, }, -#endif }; static int __init overo_spi_init(void) { overo_ads7846_init(); - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); + + if (overo_use_lcd35) { + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); + } return 0; } @@ -463,11 +499,13 @@ static void __init overo_init(void) { int ret; + if (strstr(boot_command_line, "omapdss.def_disp=lcd35")) + overo_use_lcd35 = true; + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); omap_hsmmc_init(mmc); - omap_display_init(&overo_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); @@ -484,6 +522,8 @@ static void __init overo_init(void) overo_init_keys(); omap_twl4030_audio_init("overo", NULL); + overo_display_init(); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); |