summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/omap-mpuss-lowpower.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/omap-mpuss-lowpower.c')
-rw-r--r--arch/arm/mach-omap2/omap-mpuss-lowpower.c398
1 files changed, 398 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
new file mode 100644
index 000000000000..1d5d01056558
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -0,0 +1,398 @@
+/*
+ * OMAP MPUSS low power code
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * OMAP4430 MPUSS mainly consists of dual Cortex-A9 with per-CPU
+ * Local timer and Watchdog, GIC, SCU, PL310 L2 cache controller,
+ * CPU0 and CPU1 LPRM modules.
+ * CPU0, CPU1 and MPUSS each have there own power domain and
+ * hence multiple low power combinations of MPUSS are possible.
+ *
+ * The CPU0 and CPU1 can't support Closed switch Retention (CSWR)
+ * because the mode is not supported by hw constraints of dormant
+ * mode. While waking up from the dormant mode, a reset signal
+ * to the Cortex-A9 processor must be asserted by the external
+ * power controller.
+ *
+ * With architectural inputs and hardware recommendations, only
+ * below modes are supported from power gain vs latency point of view.
+ *
+ * CPU0 CPU1 MPUSS
+ * ----------------------------------------------
+ * ON ON ON
+ * ON(Inactive) OFF ON(Inactive)
+ * OFF OFF CSWR
+ * OFF OFF OSWR
+ * OFF OFF OFF(Device OFF *TBD)
+ * ----------------------------------------------
+ *
+ * Note: CPU0 is the master core and it is the last CPU to go down
+ * and first to wake-up when MPUSS low power states are excercised
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/smp_scu.h>
+#include <asm/system.h>
+#include <asm/pgalloc.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/omap44xx.h>
+
+#include "common.h"
+#include "omap4-sar-layout.h"
+#include "pm.h"
+#include "prcm_mpu44xx.h"
+#include "prminst44xx.h"
+#include "prcm44xx.h"
+#include "prm44xx.h"
+#include "prm-regbits-44xx.h"
+
+#ifdef CONFIG_SMP
+
+struct omap4_cpu_pm_info {
+ struct powerdomain *pwrdm;
+ void __iomem *scu_sar_addr;
+ void __iomem *wkup_sar_addr;
+ void __iomem *l2x0_sar_addr;
+};
+
+static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
+static struct powerdomain *mpuss_pd;
+static void __iomem *sar_base;
+
+/*
+ * Program the wakeup routine address for the CPU0 and CPU1
+ * used for OFF or DORMANT wakeup.
+ */
+static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ __raw_writel(addr, pm_info->wkup_sar_addr);
+}
+
+/*
+ * Set the CPUx powerdomain's previous power state
+ */
+static inline void set_cpu_next_pwrst(unsigned int cpu_id,
+ unsigned int power_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
+}
+
+/*
+ * Read CPU's previous power state
+ */
+static inline unsigned int read_cpu_prev_pwrst(unsigned int cpu_id)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ return pwrdm_read_prev_pwrst(pm_info->pwrdm);
+}
+
+/*
+ * Clear the CPUx powerdomain's previous power state
+ */
+static inline void clear_cpu_prev_pwrst(unsigned int cpu_id)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+}
+
+/*
+ * Store the SCU power status value to scratchpad memory
+ */
+static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+ u32 scu_pwr_st;
+
+ switch (cpu_state) {
+ case PWRDM_POWER_RET:
+ scu_pwr_st = SCU_PM_DORMANT;
+ break;
+ case PWRDM_POWER_OFF:
+ scu_pwr_st = SCU_PM_POWEROFF;
+ break;
+ case PWRDM_POWER_ON:
+ case PWRDM_POWER_INACTIVE:
+ default:
+ scu_pwr_st = SCU_PM_NORMAL;
+ break;
+ }
+
+ __raw_writel(scu_pwr_st, pm_info->scu_sar_addr);
+}
+
+/* Helper functions for MPUSS OSWR */
+static inline void mpuss_clear_prev_logic_pwrst(void)
+{
+ u32 reg;
+
+ reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+ omap4_prminst_write_inst_reg(reg, OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+}
+
+static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
+{
+ u32 reg;
+
+ if (cpu_id) {
+ reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST,
+ OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
+ omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST,
+ OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
+ } else {
+ reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST,
+ OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
+ omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST,
+ OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
+ }
+}
+
+/**
+ * omap4_mpuss_read_prev_context_state:
+ * Function returns the MPUSS previous context state
+ */
+u32 omap4_mpuss_read_prev_context_state(void)
+{
+ u32 reg;
+
+ reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
+ reg &= OMAP4430_LOSTCONTEXT_DFF_MASK;
+ return reg;
+}
+
+/*
+ * Store the CPU cluster state for L2X0 low power operations.
+ */
+static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ __raw_writel(save_state, pm_info->l2x0_sar_addr);
+}
+
+/*
+ * Save the L2X0 AUXCTRL and POR value to SAR memory. Its used to
+ * in every restore MPUSS OFF path.
+ */
+#ifdef CONFIG_CACHE_L2X0
+static void save_l2x0_context(void)
+{
+ u32 val;
+ void __iomem *l2x0_base = omap4_get_l2cache_base();
+
+ val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
+ __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
+ val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
+ __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+}
+#else
+static void save_l2x0_context(void)
+{}
+#endif
+
+/**
+ * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
+ * The purpose of this function is to manage low power programming
+ * of OMAP4 MPUSS subsystem
+ * @cpu : CPU ID
+ * @power_state: Low power state.
+ *
+ * MPUSS states for the context save:
+ * save_state =
+ * 0 - Nothing lost and no need to save: MPUSS INACTIVE
+ * 1 - CPUx L1 and logic lost: MPUSS CSWR
+ * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
+ * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
+ */
+int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
+{
+ unsigned int save_state = 0;
+ unsigned int wakeup_cpu;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ return -ENXIO;
+
+ switch (power_state) {
+ case PWRDM_POWER_ON:
+ case PWRDM_POWER_INACTIVE:
+ save_state = 0;
+ break;
+ case PWRDM_POWER_OFF:
+ save_state = 1;
+ break;
+ case PWRDM_POWER_RET:
+ default:
+ /*
+ * CPUx CSWR is invalid hardware state. Also CPUx OSWR
+ * doesn't make much scense, since logic is lost and $L1
+ * needs to be cleaned because of coherency. This makes
+ * CPUx OSWR equivalent to CPUX OFF and hence not supported
+ */
+ WARN_ON(1);
+ return -ENXIO;
+ }
+
+ pwrdm_pre_transition();
+
+ /*
+ * Check MPUSS next state and save interrupt controller if needed.
+ * In MPUSS OSWR or device OFF, interrupt controller contest is lost.
+ */
+ mpuss_clear_prev_logic_pwrst();
+ pwrdm_clear_all_prev_pwrst(mpuss_pd);
+ if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
+ (pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF))
+ save_state = 2;
+
+ clear_cpu_prev_pwrst(cpu);
+ cpu_clear_prev_logic_pwrst(cpu);
+ set_cpu_next_pwrst(cpu, power_state);
+ set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume));
+ scu_pwrst_prepare(cpu, power_state);
+ l2x0_pwrst_prepare(cpu, save_state);
+
+ /*
+ * Call low level function with targeted low power state.
+ */
+ cpu_suspend(save_state, omap4_finish_suspend);
+
+ /*
+ * Restore the CPUx power state to ON otherwise CPUx
+ * power domain can transitions to programmed low power
+ * state while doing WFI outside the low powe code. On
+ * secure devices, CPUx does WFI which can result in
+ * domain transition
+ */
+ wakeup_cpu = smp_processor_id();
+ set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
+
+ pwrdm_post_transition();
+
+ return 0;
+}
+
+/**
+ * omap4_hotplug_cpu: OMAP4 CPU hotplug entry
+ * @cpu : CPU ID
+ * @power_state: CPU low power state.
+ */
+int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+{
+ unsigned int cpu_state = 0;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ return -ENXIO;
+
+ if (power_state == PWRDM_POWER_OFF)
+ cpu_state = 1;
+
+ clear_cpu_prev_pwrst(cpu);
+ set_cpu_next_pwrst(cpu, power_state);
+ set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup));
+ scu_pwrst_prepare(cpu, power_state);
+
+ /*
+ * CPU never retuns back if targetted power state is OFF mode.
+ * CPU ONLINE follows normal CPU ONLINE ptah via
+ * omap_secondary_startup().
+ */
+ omap4_finish_suspend(cpu_state);
+
+ set_cpu_next_pwrst(cpu, PWRDM_POWER_ON);
+ return 0;
+}
+
+
+/*
+ * Initialise OMAP4 MPUSS
+ */
+int __init omap4_mpuss_init(void)
+{
+ struct omap4_cpu_pm_info *pm_info;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
+ return -ENODEV;
+ }
+
+ sar_base = omap4_get_sar_ram_base();
+
+ /* Initilaise per CPU PM information */
+ pm_info = &per_cpu(omap4_pm_info, 0x0);
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
+ pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+ pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
+ if (!pm_info->pwrdm) {
+ pr_err("Lookup failed for CPU0 pwrdm\n");
+ return -ENODEV;
+ }
+
+ /* Clear CPU previous power domain state */
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+ cpu_clear_prev_logic_pwrst(0);
+
+ /* Initialise CPU0 power domain state to ON */
+ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
+
+ pm_info = &per_cpu(omap4_pm_info, 0x1);
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
+ pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
+ pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
+ if (!pm_info->pwrdm) {
+ pr_err("Lookup failed for CPU1 pwrdm\n");
+ return -ENODEV;
+ }
+
+ /* Clear CPU previous power domain state */
+ pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
+ cpu_clear_prev_logic_pwrst(1);
+
+ /* Initialise CPU1 power domain state to ON */
+ pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
+
+ mpuss_pd = pwrdm_lookup("mpu_pwrdm");
+ if (!mpuss_pd) {
+ pr_err("Failed to lookup MPUSS power domain\n");
+ return -ENODEV;
+ }
+ pwrdm_clear_all_prev_pwrst(mpuss_pd);
+ mpuss_clear_prev_logic_pwrst();
+
+ /* Save device type on scratchpad for low level code to use */
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP)
+ __raw_writel(1, sar_base + OMAP_TYPE_OFFSET);
+ else
+ __raw_writel(0, sar_base + OMAP_TYPE_OFFSET);
+
+ save_l2x0_context();
+
+ return 0;
+}
+
+#endif