summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/serial.c')
-rw-r--r--arch/arm/mach-omap2/serial.c578
1 files changed, 299 insertions, 279 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 566e991ede81..becf0e38ef7e 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -19,20 +19,31 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/serial_8250.h>
+#include <linux/pm_runtime.h>
+
+#ifdef CONFIG_SERIAL_OMAP
+#include <plat/omap-serial.h>
+#endif
#include <plat/common.h>
#include <plat/board.h>
#include <plat/clock.h>
-#include <plat/control.h>
+#include <plat/dma.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
#include "prm.h"
#include "pm.h"
+#include "cm.h"
#include "prm-regbits-34xx.h"
+#include "control.h"
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
@@ -48,6 +59,8 @@
*/
#define DEFAULT_TIMEOUT 0
+#define MAX_UART_HWMOD_NAME_LEN 16
+
struct omap_uart_state {
int num;
int can_sleep;
@@ -58,14 +71,21 @@ struct omap_uart_state {
void __iomem *wk_en;
u32 wk_mask;
u32 padconf;
+ u32 dma_enabled;
struct clk *ick;
struct clk *fck;
int clocked;
- struct plat_serial8250_port *p;
+ int irq;
+ int regshift;
+ int irqflags;
+ void __iomem *membase;
+ resource_size_t mapbase;
+
struct list_head node;
- struct platform_device pdev;
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
u32 errata;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
@@ -83,75 +103,47 @@ struct omap_uart_state {
};
static LIST_HEAD(uart_list);
+static u8 num_uarts;
-static struct plat_serial8250_port serial_platform_data0[] = {
- {
- .irq = 72,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = OMAP24XX_BASE_BAUD * 16,
- }, {
- .flags = 0
- }
-};
+/*
+ * Since these idle/enable hooks are used in the idle path itself
+ * which has interrupts disabled, use the non-locking versions of
+ * the hwmod enable/disable functions.
+ */
+static int uart_idle_hwmod(struct omap_device *od)
+{
+ _omap_hwmod_idle(od->hwmods[0]);
-static struct plat_serial8250_port serial_platform_data1[] = {
- {
- .irq = 73,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = OMAP24XX_BASE_BAUD * 16,
- }, {
- .flags = 0
- }
-};
+ return 0;
+}
-static struct plat_serial8250_port serial_platform_data2[] = {
- {
- .irq = 74,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = OMAP24XX_BASE_BAUD * 16,
- }, {
- .flags = 0
- }
-};
+static int uart_enable_hwmod(struct omap_device *od)
+{
+ _omap_hwmod_enable(od->hwmods[0]);
-static struct plat_serial8250_port serial_platform_data3[] = {
+ return 0;
+}
+
+static struct omap_device_pm_latency omap_uart_latency[] = {
{
- .irq = 70,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = OMAP24XX_BASE_BAUD * 16,
- }, {
- .flags = 0
- }
+ .deactivate_func = uart_idle_hwmod,
+ .activate_func = uart_enable_hwmod,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
};
-void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
-{
- serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
- serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
- serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
- serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-}
-
static inline unsigned int __serial_read_reg(struct uart_port *up,
- int offset)
+ int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
}
-static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+static inline unsigned int serial_read_reg(struct omap_uart_state *uart,
int offset)
{
- offset <<= up->regshift;
- return (unsigned int)__raw_readb(up->membase + offset);
+ offset <<= uart->regshift;
+ return (unsigned int)__raw_readb(uart->membase + offset);
}
static inline void __serial_write_reg(struct uart_port *up, int offset,
@@ -161,11 +153,11 @@ static inline void __serial_write_reg(struct uart_port *up, int offset,
__raw_writeb(value, up->membase + offset);
}
-static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
int value)
{
- offset <<= p->regshift;
- __raw_writeb(value, p->membase + offset);
+ offset <<= uart->regshift;
+ __raw_writeb(value, uart->membase + offset);
}
/*
@@ -173,14 +165,12 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
* properly. Note that the TX watermark initialization may not be needed
* once the 8250.c watermark handling code is merged.
*/
+
static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
- struct plat_serial8250_port *p = uart->p;
-
- serial_write_reg(p, UART_OMAP_MDR1, 0x07);
- serial_write_reg(p, UART_OMAP_SCR, 0x08);
- serial_write_reg(p, UART_OMAP_MDR1, 0x00);
- serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
+ serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
+ serial_write_reg(uart, UART_OMAP_SCR, 0x08);
+ serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
}
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
@@ -197,24 +187,23 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
u8 fcr_val)
{
- struct plat_serial8250_port *p = uart->p;
u8 timeout = 255;
- serial_write_reg(p, UART_OMAP_MDR1, mdr1_val);
+ serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val);
udelay(2);
- serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
+ serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_RCVR);
/*
* Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
* TX_FIFO_E bit is 1.
*/
- while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) &
+ while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) &
(UART_LSR_THRE | UART_LSR_DR))) {
timeout--;
if (!timeout) {
/* Should *never* happen. we warn and carry on */
- dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n",
- serial_read_reg(p, UART_LSR));
+ dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n",
+ serial_read_reg(uart, UART_LSR));
break;
}
udelay(1);
@@ -224,23 +213,22 @@ static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
static void omap_uart_save_context(struct omap_uart_state *uart)
{
u16 lcr = 0;
- struct plat_serial8250_port *p = uart->p;
if (!enable_off_mode)
return;
- lcr = serial_read_reg(p, UART_LCR);
- serial_write_reg(p, UART_LCR, 0xBF);
- uart->dll = serial_read_reg(p, UART_DLL);
- uart->dlh = serial_read_reg(p, UART_DLM);
- serial_write_reg(p, UART_LCR, lcr);
- uart->ier = serial_read_reg(p, UART_IER);
- uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
- uart->scr = serial_read_reg(p, UART_OMAP_SCR);
- uart->wer = serial_read_reg(p, UART_OMAP_WER);
- serial_write_reg(p, UART_LCR, 0x80);
- uart->mcr = serial_read_reg(p, UART_MCR);
- serial_write_reg(p, UART_LCR, lcr);
+ lcr = serial_read_reg(uart, UART_LCR);
+ serial_write_reg(uart, UART_LCR, 0xBF);
+ uart->dll = serial_read_reg(uart, UART_DLL);
+ uart->dlh = serial_read_reg(uart, UART_DLM);
+ serial_write_reg(uart, UART_LCR, lcr);
+ uart->ier = serial_read_reg(uart, UART_IER);
+ uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC);
+ uart->scr = serial_read_reg(uart, UART_OMAP_SCR);
+ uart->wer = serial_read_reg(uart, UART_OMAP_WER);
+ serial_write_reg(uart, UART_LCR, 0x80);
+ uart->mcr = serial_read_reg(uart, UART_MCR);
+ serial_write_reg(uart, UART_LCR, lcr);
uart->context_valid = 1;
}
@@ -248,7 +236,6 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
static void omap_uart_restore_context(struct omap_uart_state *uart)
{
u16 efr = 0;
- struct plat_serial8250_port *p = uart->p;
if (!enable_off_mode)
return;
@@ -261,29 +248,30 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
else
- serial_write_reg(p, UART_OMAP_MDR1, 0x7);
- serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
- efr = serial_read_reg(p, UART_EFR);
- serial_write_reg(p, UART_EFR, UART_EFR_ECB);
- serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
- serial_write_reg(p, UART_IER, 0x0);
- serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
- serial_write_reg(p, UART_DLL, uart->dll);
- serial_write_reg(p, UART_DLM, uart->dlh);
- serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
- serial_write_reg(p, UART_IER, uart->ier);
- serial_write_reg(p, UART_LCR, 0x80);
- serial_write_reg(p, UART_MCR, uart->mcr);
- serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
- serial_write_reg(p, UART_EFR, efr);
- serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
- serial_write_reg(p, UART_OMAP_SCR, uart->scr);
- serial_write_reg(p, UART_OMAP_WER, uart->wer);
- serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+ serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
+ serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+ efr = serial_read_reg(uart, UART_EFR);
+ serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
+ serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(uart, UART_IER, 0x0);
+ serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(uart, UART_DLL, uart->dll);
+ serial_write_reg(uart, UART_DLM, uart->dlh);
+ serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(uart, UART_IER, uart->ier);
+ serial_write_reg(uart, UART_LCR, 0x80);
+ serial_write_reg(uart, UART_MCR, uart->mcr);
+ serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(uart, UART_EFR, efr);
+ serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8);
+ serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
+ serial_write_reg(uart, UART_OMAP_WER, uart->wer);
+ serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
else
- serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+ /* UART 16x mode */
+ serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
}
#else
static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
@@ -295,8 +283,7 @@ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
if (uart->clocked)
return;
- clk_enable(uart->ick);
- clk_enable(uart->fck);
+ omap_device_enable(uart->pdev);
uart->clocked = 1;
omap_uart_restore_context(uart);
}
@@ -310,8 +297,7 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
omap_uart_save_context(uart);
uart->clocked = 0;
- clk_disable(uart->ick);
- clk_disable(uart->fck);
+ omap_device_idle(uart->pdev);
}
static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
@@ -349,18 +335,24 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
}
static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
- int enable)
+ int enable)
{
- struct plat_serial8250_port *p = uart->p;
- u16 sysc;
+ u8 idlemode;
- sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
- if (enable)
- sysc |= 0x2 << 3;
- else
- sysc |= 0x1 << 3;
+ if (enable) {
+ /**
+ * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests
+ * in Smartidle Mode When Configured for DMA Operations.
+ */
+ if (uart->dma_enabled)
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
+ } else {
+ idlemode = HWMOD_IDLEMODE_NO;
+ }
- serial_write_reg(p, UART_OMAP_SYSC, sysc);
+ omap_hwmod_set_slave_idlemode(uart->oh, idlemode);
}
static void omap_uart_block_sleep(struct omap_uart_state *uart)
@@ -377,7 +369,7 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
static void omap_uart_allow_sleep(struct omap_uart_state *uart)
{
- if (device_may_wakeup(&uart->pdev.dev))
+ if (device_may_wakeup(&uart->pdev->dev))
omap_uart_enable_wakeup(uart);
else
omap_uart_disable_wakeup(uart);
@@ -472,6 +464,7 @@ int omap_uart_can_sleep(void)
* UART will not idle or sleep for its timeout period.
*
**/
+/* static int first_interrupt; */
static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
{
struct omap_uart_state *uart = dev_id;
@@ -483,7 +476,6 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
static void omap_uart_idle_init(struct omap_uart_state *uart)
{
- struct plat_serial8250_port *p = uart->p;
int ret;
uart->can_sleep = 0;
@@ -495,7 +487,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
omap_uart_smart_idle_enable(uart, 0);
if (cpu_is_omap34xx()) {
- u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+ u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
u32 wk_mask = 0;
u32 padconf = 0;
@@ -514,19 +506,17 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
wk_mask = OMAP3430_ST_UART3_MASK;
padconf = 0x19e;
break;
+ case 3:
+ wk_mask = OMAP3630_ST_UART4_MASK;
+ padconf = 0x0d2;
+ break;
}
uart->wk_mask = wk_mask;
uart->padconf = padconf;
} else if (cpu_is_omap24xx()) {
u32 wk_mask = 0;
+ u32 wk_en = PM_WKEN1, wk_st = PM_WKST1;
- if (cpu_is_omap2430()) {
- uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
- uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
- } else if (cpu_is_omap2420()) {
- uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
- uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
- }
switch (uart->num) {
case 0:
wk_mask = OMAP24XX_ST_UART1_MASK;
@@ -535,10 +525,19 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
wk_mask = OMAP24XX_ST_UART2_MASK;
break;
case 2:
+ wk_en = OMAP24XX_PM_WKEN2;
+ wk_st = OMAP24XX_PM_WKST2;
wk_mask = OMAP24XX_ST_UART3_MASK;
break;
}
uart->wk_mask = wk_mask;
+ if (cpu_is_omap2430()) {
+ uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, wk_en);
+ uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, wk_st);
+ } else if (cpu_is_omap2420()) {
+ uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, wk_en);
+ uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, wk_st);
+ }
} else {
uart->wk_en = NULL;
uart->wk_st = NULL;
@@ -546,9 +545,9 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
uart->padconf = 0;
}
- p->irqflags |= IRQF_SHARED;
- ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
- "serial idle", (void *)uart);
+ uart->irqflags |= IRQF_SHARED;
+ ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
+ IRQF_SHARED, "serial idle", (void *)uart);
WARN_ON(ret);
}
@@ -558,11 +557,17 @@ void omap_uart_enable_irqs(int enable)
struct omap_uart_state *uart;
list_for_each_entry(uart, &uart_list, node) {
- if (enable)
- ret = request_irq(uart->p->irq, omap_uart_interrupt,
- IRQF_SHARED, "serial idle", (void *)uart);
- else
- free_irq(uart->p->irq, (void *)uart);
+ if (enable) {
+ pm_runtime_put_sync(&uart->pdev->dev);
+ ret = request_threaded_irq(uart->irq, NULL,
+ omap_uart_interrupt,
+ IRQF_SHARED,
+ "serial idle",
+ (void *)uart);
+ } else {
+ pm_runtime_get_noresume(&uart->pdev->dev);
+ free_irq(uart->irq, (void *)uart);
+ }
}
}
@@ -570,10 +575,9 @@ static ssize_t sleep_timeout_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_uart_state *uart = container_of(pdev,
- struct omap_uart_state, pdev);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *odev = to_omap_device(pdev);
+ struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
return sprintf(buf, "%u\n", uart->timeout / HZ);
}
@@ -582,10 +586,9 @@ static ssize_t sleep_timeout_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t n)
{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_uart_state *uart = container_of(pdev,
- struct omap_uart_state, pdev);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *odev = to_omap_device(pdev);
+ struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
@@ -608,48 +611,15 @@ static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show,
#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
#else
static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+ /* Needed to enable UART clocks when built without CONFIG_PM */
+ omap_uart_enable_clocks(uart);
+}
#define DEV_CREATE_FILE(dev, attr)
#endif /* CONFIG_PM */
-static struct omap_uart_state omap_uart[] = {
- {
- .pdev = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data0,
- },
- },
- }, {
- .pdev = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = serial_platform_data1,
- },
- },
- }, {
- .pdev = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
- .dev = {
- .platform_data = serial_platform_data2,
- },
- },
- },
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
- {
- .pdev = {
- .name = "serial8250",
- .id = 3,
- .dev = {
- .platform_data = serial_platform_data3,
- },
- },
- },
-#endif
-};
-
+#ifndef CONFIG_SERIAL_OMAP
/*
* Override the default 8250 read handler: mem_serial_in()
* Empty RX fifo read causes an abort on omap3630 and omap4
@@ -682,71 +652,44 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
}
__serial_write_reg(up, offset, value);
}
+#endif
+
void __init omap_serial_early_init(void)
{
- int i, nr_ports;
- char name[16];
+ int i = 0;
- if (!(cpu_is_omap3630() || cpu_is_omap4430()))
- nr_ports = 3;
- else
- nr_ports = ARRAY_SIZE(omap_uart);
+ do {
+ char oh_name[MAX_UART_HWMOD_NAME_LEN];
+ struct omap_hwmod *oh;
+ struct omap_uart_state *uart;
- /*
- * Make sure the serial ports are muxed on at this point.
- * You have to mux them off in device drivers later on
- * if not needed.
- */
+ snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
+ "uart%d", i + 1);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh)
+ break;
- for (i = 0; i < nr_ports; i++) {
- struct omap_uart_state *uart = &omap_uart[i];
- struct platform_device *pdev = &uart->pdev;
- struct device *dev = &pdev->dev;
- struct plat_serial8250_port *p = dev->platform_data;
+ uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
+ if (WARN_ON(!uart))
+ return;
+
+ uart->oh = oh;
+ uart->num = i++;
+ list_add_tail(&uart->node, &uart_list);
+ num_uarts++;
- /* Don't map zero-based physical address */
- if (p->mapbase == 0) {
- dev_warn(dev, "no physical address for uart#%d,"
- " so skipping early_init...\n", i);
- continue;
- }
/*
- * Module 4KB + L4 interconnect 4KB
- * Static mapping, never released
+ * NOTE: omap_hwmod_init() has not yet been called,
+ * so no hwmod functions will work yet.
*/
- p->membase = ioremap(p->mapbase, SZ_8K);
- if (!p->membase) {
- dev_err(dev, "ioremap failed for uart%i\n", i + 1);
- continue;
- }
-
- sprintf(name, "uart%d_ick", i + 1);
- uart->ick = clk_get(NULL, name);
- if (IS_ERR(uart->ick)) {
- dev_err(dev, "Could not get uart%d_ick\n", i + 1);
- uart->ick = NULL;
- }
- sprintf(name, "uart%d_fck", i+1);
- uart->fck = clk_get(NULL, name);
- if (IS_ERR(uart->fck)) {
- dev_err(dev, "Could not get uart%d_fck\n", i + 1);
- uart->fck = NULL;
- }
-
- /* FIXME: Remove this once the clkdev is ready */
- if (!cpu_is_omap44xx()) {
- if (!uart->ick || !uart->fck)
- continue;
- }
-
- uart->num = i;
- p->private_data = uart;
- uart->p = p;
-
- if (cpu_is_omap44xx())
- p->irq += 32;
- }
+ /*
+ * During UART early init, device need to be probed
+ * to determine SoC specific init before omap_device
+ * is ready. Therefore, don't allow idle here
+ */
+ uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
+ } while (1);
}
/**
@@ -763,53 +706,135 @@ void __init omap_serial_early_init(void)
void __init omap_serial_init_port(int port)
{
struct omap_uart_state *uart;
- struct platform_device *pdev;
- struct device *dev;
-
- BUG_ON(port < 0);
- BUG_ON(port >= ARRAY_SIZE(omap_uart));
-
- uart = &omap_uart[port];
- pdev = &uart->pdev;
- dev = &pdev->dev;
+ struct omap_hwmod *oh;
+ struct omap_device *od;
+ void *pdata = NULL;
+ u32 pdata_size = 0;
+ char *name;
+#ifndef CONFIG_SERIAL_OMAP
+ struct plat_serial8250_port ports[2] = {
+ {},
+ {.flags = 0},
+ };
+ struct plat_serial8250_port *p = &ports[0];
+#else
+ struct omap_uart_port_info omap_up;
+#endif
- /* Don't proceed if there's no clocks available */
- if (unlikely(!uart->ick || !uart->fck)) {
- WARN(1, "%s: can't init uart%d, no clocks available\n",
- kobject_name(&dev->kobj), port);
+ if (WARN_ON(port < 0))
+ return;
+ if (WARN_ON(port >= num_uarts))
return;
- }
-
- omap_uart_enable_clocks(uart);
-
- omap_uart_reset(uart);
- omap_uart_idle_init(uart);
- list_add_tail(&uart->node, &uart_list);
+ list_for_each_entry(uart, &uart_list, node)
+ if (port == uart->num)
+ break;
- if (WARN_ON(platform_device_register(pdev)))
- return;
+ oh = uart->oh;
+ uart->dma_enabled = 0;
+#ifndef CONFIG_SERIAL_OMAP
+ name = "serial8250";
- if ((cpu_is_omap34xx() && uart->padconf) ||
- (uart->wk_en && uart->wk_mask)) {
- device_init_wakeup(dev, true);
- DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
- }
+ /*
+ * !! 8250 driver does not use standard IORESOURCE* It
+ * has it's own custom pdata that can be taken from
+ * the hwmod resource data. But, this needs to be
+ * done after the build.
+ *
+ * ?? does it have to be done before the register ??
+ * YES, because platform_device_data_add() copies
+ * pdata, it does not use a pointer.
+ */
+ p->flags = UPF_BOOT_AUTOCONF;
+ p->iotype = UPIO_MEM;
+ p->regshift = 2;
+ p->uartclk = OMAP24XX_BASE_BAUD * 16;
+ p->irq = oh->mpu_irqs[0].irq;
+ p->mapbase = oh->slaves[0]->addr->pa_start;
+ p->membase = omap_hwmod_get_mpu_rt_va(oh);
+ p->irqflags = IRQF_SHARED;
+ p->private_data = uart;
/*
* omap44xx: Never read empty UART fifo
* omap3xxx: Never read empty UART fifo on UARTs
* with IP rev >=0x52
*/
+ uart->regshift = p->regshift;
+ uart->membase = p->membase;
if (cpu_is_omap44xx())
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
- else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+ else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
- uart->p->serial_in = serial_in_override;
- uart->p->serial_out = serial_out_override;
+ p->serial_in = serial_in_override;
+ p->serial_out = serial_out_override;
+ }
+
+ pdata = &ports[0];
+ pdata_size = 2 * sizeof(struct plat_serial8250_port);
+#else
+
+ name = DRIVER_NAME;
+
+ omap_up.dma_enabled = uart->dma_enabled;
+ omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
+ omap_up.mapbase = oh->slaves[0]->addr->pa_start;
+ omap_up.membase = omap_hwmod_get_mpu_rt_va(oh);
+ omap_up.irqflags = IRQF_SHARED;
+ omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+
+ pdata = &omap_up;
+ pdata_size = sizeof(struct omap_uart_port_info);
+#endif
+
+ if (WARN_ON(!oh))
+ return;
+
+ od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
+ omap_uart_latency,
+ ARRAY_SIZE(omap_uart_latency), false);
+ WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
+ name, oh->name);
+
+ uart->irq = oh->mpu_irqs[0].irq;
+ uart->regshift = 2;
+ uart->mapbase = oh->slaves[0]->addr->pa_start;
+ uart->membase = omap_hwmod_get_mpu_rt_va(oh);
+ uart->pdev = &od->pdev;
+
+ oh->dev_attr = uart;
+
+ /*
+ * Because of early UART probing, UART did not get idled
+ * on init. Now that omap_device is ready, ensure full idle
+ * before doing omap_device_enable().
+ */
+ omap_hwmod_idle(uart->oh);
+
+ omap_device_enable(uart->pdev);
+ omap_uart_idle_init(uart);
+ omap_uart_reset(uart);
+ omap_hwmod_enable_wakeup(uart->oh);
+ omap_device_idle(uart->pdev);
+
+ /*
+ * Need to block sleep long enough for interrupt driven
+ * driver to start. Console driver is in polling mode
+ * so device needs to be kept enabled while polling driver
+ * is in use.
+ */
+ if (uart->timeout)
+ uart->timeout = (30 * HZ);
+ omap_uart_block_sleep(uart);
+ uart->timeout = DEFAULT_TIMEOUT;
+
+ if ((cpu_is_omap34xx() && uart->padconf) ||
+ (uart->wk_en && uart->wk_mask)) {
+ device_init_wakeup(&od->pdev.dev, true);
+ DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
}
/* Enable the MDR1 errata for OMAP3 */
@@ -826,13 +851,8 @@ void __init omap_serial_init_port(int port)
*/
void __init omap_serial_init(void)
{
- int i, nr_ports;
-
- if (!(cpu_is_omap3630() || cpu_is_omap4430()))
- nr_ports = 3;
- else
- nr_ports = ARRAY_SIZE(omap_uart);
+ struct omap_uart_state *uart;
- for (i = 0; i < nr_ports; i++)
- omap_serial_init_port(i);
+ list_for_each_entry(uart, &uart_list, node)
+ omap_serial_init_port(uart->num);
}