diff options
Diffstat (limited to 'arch/arm/mach-omap2')
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 12 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-ldp.c | 430 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 1311 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-video.c | 67 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51.c | 141 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51.h | 11 |
7 files changed, 0 insertions, 1976 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5a0b380a8166..a9afeebd59f2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -192,12 +192,6 @@ config MACH_OMAP2_TUSB6010 depends on ARCH_OMAP2 && SOC_OMAP2420 default y if MACH_NOKIA_N8X0 -config MACH_OMAP_LDP - bool "OMAP3 LDP board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 @@ -222,12 +216,6 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX -config MACH_NOKIA_RX51 - bool "Nokia N900 (RX-51) phone" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a7f2d051f524..5b37ec29996e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -231,11 +231,7 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o -obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o -obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o -obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o -obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c deleted file mode 100644 index 390795b334c3..000000000000 --- a/arch/arm/mach-omap2/board-ldp.c +++ /dev/null @@ -1,430 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-ldp.c - * - * Copyright (C) 2008 Texas Instruments Inc. - * Nishant Kamat <nskamat@ti.com> - * - * Modified from mach-omap2/board-3430sdp.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/gpio_keys.h> -#include <linux/workqueue.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/spi/spi.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include <linux/io.h> -#include <linux/smsc911x.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "gpmc.h" -#include "gpmc-smsc911x.h" - -#include <linux/platform_data/omapdss.h> -#include <video/omap-panel-data.h> - -#include "board-flash.h" -#include "mux.h" -#include "hsmmc.h" -#include "control.h" -#include "common-board-devices.h" -#include "display.h" - -#define LDP_SMSC911X_CS 1 -#define LDP_SMSC911X_GPIO 152 -#define DEBUG_BASE 0x08000000 -#define LDP_ETHR_START DEBUG_BASE - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_1), - KEY(1, 0, KEY_2), - KEY(2, 0, KEY_3), - KEY(0, 1, KEY_4), - KEY(1, 1, KEY_5), - KEY(2, 1, KEY_6), - KEY(3, 1, KEY_F5), - KEY(0, 2, KEY_7), - KEY(1, 2, KEY_8), - KEY(2, 2, KEY_9), - KEY(3, 2, KEY_F6), - KEY(0, 3, KEY_F7), - KEY(1, 3, KEY_0), - KEY(2, 3, KEY_F8), - PERSISTENT_KEY(4, 5), - KEY(4, 4, KEY_VOLUMEUP), - KEY(5, 5, KEY_VOLUMEDOWN), - 0 -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data ldp_kp_twl4030_data = { - .keymap_data = &board_map_data, - .rows = 6, - .cols = 6, - .rep = 1, -}; - -static struct gpio_keys_button ldp_gpio_keys_buttons[] = { - [0] = { - .code = KEY_ENTER, - .gpio = 101, - .desc = "enter sw", - .active_low = 1, - .debounce_interval = 30, - }, - [1] = { - .code = KEY_F1, - .gpio = 102, - .desc = "func 1", - .active_low = 1, - .debounce_interval = 30, - }, - [2] = { - .code = KEY_F2, - .gpio = 103, - .desc = "func 2", - .active_low = 1, - .debounce_interval = 30, - }, - [3] = { - .code = KEY_F3, - .gpio = 104, - .desc = "func 3", - .active_low = 1, - .debounce_interval = 30, - }, - [4] = { - .code = KEY_F4, - .gpio = 105, - .desc = "func 4", - .active_low = 1, - .debounce_interval = 30, - }, - [5] = { - .code = KEY_LEFT, - .gpio = 106, - .desc = "left sw", - .active_low = 1, - .debounce_interval = 30, - }, - [6] = { - .code = KEY_RIGHT, - .gpio = 107, - .desc = "right sw", - .active_low = 1, - .debounce_interval = 30, - }, - [7] = { - .code = KEY_UP, - .gpio = 108, - .desc = "up sw", - .active_low = 1, - .debounce_interval = 30, - }, - [8] = { - .code = KEY_DOWN, - .gpio = 109, - .desc = "down sw", - .active_low = 1, - .debounce_interval = 30, - }, -}; - -static struct gpio_keys_platform_data ldp_gpio_keys = { - .buttons = ldp_gpio_keys_buttons, - .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons), - .rep = 1, -}; - -static struct platform_device ldp_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &ldp_gpio_keys, - }, -}; - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .cs = LDP_SMSC911X_CS, - .gpio_irq = LDP_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT, -}; - -static inline void __init ldp_init_smsc911x(void) -{ - gpmc_smsc911x_init(&smsc911x_cfg); -} - -/* LCD */ - -#define LCD_PANEL_RESET_GPIO 55 -#define LCD_PANEL_QVGA_GPIO 56 - -static const struct display_timing ldp_lcd_videomode = { - .pixelclock = { 0, 5400000, 0 }, - - .hactive = { 0, 240, 0 }, - .hfront_porch = { 0, 3, 0 }, - .hback_porch = { 0, 39, 0 }, - .hsync_len = { 0, 3, 0 }, - - .vactive = { 0, 320, 0 }, - .vfront_porch = { 0, 2, 0 }, - .vback_porch = { 0, 7, 0 }, - .vsync_len = { 0, 1, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data ldp_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 18, - - .display_timing = &ldp_lcd_videomode, - - .enable_gpio = -1, /* filled in code */ - .backlight_gpio = -1, /* filled in code */ -}; - -static struct platform_device ldp_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &ldp_lcd_pdata, -}; - -static struct omap_dss_board_info ldp_dss_data = { - .default_display_name = "lcd", -}; - -static void __init ldp_display_init(void) -{ - int r; - - static struct gpio gpios[] __initdata = { - {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, - {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - return; - } - - omap_display_init(&ldp_dss_data); -} - -static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) -{ - int res; - - /* LCD enable GPIO */ - ldp_lcd_pdata.enable_gpio = gpio + 7; - - /* Backlight enable GPIO */ - ldp_lcd_pdata.backlight_gpio = gpio + 15; - - res = platform_device_register(&ldp_lcd_device); - if (res) - pr_err("Unable to register LCD: %d\n", res); - - return 0; -} - -static struct twl4030_gpio_platform_data ldp_gpio_data = { - .setup = ldp_twl_gpio_setup, -}; - -static struct regulator_consumer_supply ldp_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data ldp_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply), - .consumer_supplies = ldp_vmmc1_supply, -}; - -/* ads7846 on SPI */ -static struct regulator_consumer_supply ldp_vaux1_supplies[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), -}; - -/* VAUX1 */ -static struct regulator_init_data ldp_vaux1 = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ldp_vaux1_supplies), - .consumer_supplies = ldp_vaux1_supplies, -}; - -static struct regulator_consumer_supply ldp_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -static struct regulator_init_data ldp_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies), - .consumer_supplies = ldp_vpll2_supplies, -}; - -static struct twl4030_platform_data ldp_twldata = { - /* platform_data for children goes here */ - .vmmc1 = &ldp_vmmc1, - .vaux1 = &ldp_vaux1, - .vpll2 = &ldp_vpll2, - .gpio = &ldp_gpio_data, - .keypad = &ldp_kp_twl4030_data, -}; - -static int __init omap_i2c_init(void) -{ - omap3_pmic_get_config(&ldp_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); - omap3_pmic_init("twl4030", &ldp_twldata); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct omap2_hsmmc_info mmc[] __initdata = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - {} /* Terminator */ -}; - -static struct platform_device *ldp_devices[] __initdata = { - &ldp_gpio_keys_device, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct mtd_partition ldp_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader-NAND", - .offset = 0, - .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "Boot Env-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ - .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ - }, - { - .name = "Kernel-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ - .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ - }, - { - .name = "File System - NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ - .size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */ - }, - -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init omap_ldp_init(void) -{ - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - ldp_init_smsc911x(); - omap_i2c_init(); - platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); - omap_ads7846_init(1, 54, 310, NULL); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), - 0, 0, nand_default_timings); - - omap_hsmmc_init(mmc); - ldp_display_init(); -} - -MACHINE_START(OMAP_LDP, "OMAP LDP board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap_ldp_init, - .init_late = omap3430_init_late, - .init_time = omap_init_time, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c deleted file mode 100644 index 631a5a4005fc..000000000000 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ /dev/null @@ -1,1311 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-rx51-peripherals.c - * - * Copyright (C) 2008-2009 Nokia - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/wl12xx.h> -#include <linux/spi/tsc2005.h> -#include <linux/i2c.h> -#include <linux/i2c/twl.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/regulator/machine.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/gpio/machine.h> -#include <linux/omap-gpmc.h> -#include <linux/mmc/host.h> -#include <linux/power/isp1704_charger.h> -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/mtd-onenand-omap2.h> - -#include <plat/dmtimer.h> - -#include <asm/system_info.h> - -#include "common.h" -#include <linux/omap-dma.h> - -#include "board-rx51.h" - -#include <sound/tlv320aic3x.h> -#include <sound/tpa6130a2-plat.h> -#include <linux/platform_data/media/si4713.h> -#include <linux/platform_data/leds-lp55xx.h> - -#include <linux/platform_data/tsl2563.h> -#include <linux/lis3lv02d.h> - -#include <video/omap-panel-data.h> - -#include <linux/platform_data/pwm_omap_dmtimer.h> -#include <linux/platform_data/media/ir-rx51.h> - -#include "mux.h" -#include "omap-pm.h" -#include "hsmmc.h" -#include "common-board-devices.h" -#include "soc.h" -#include "omap-secure.h" - -#define SYSTEM_REV_B_USES_VAUX3 0x1699 -#define SYSTEM_REV_S_USES_VAUX3 0x8 - -#define RX51_WL1251_POWER_GPIO 87 -#define RX51_WL1251_IRQ_GPIO 42 -#define RX51_FMTX_RESET_GPIO 163 -#define RX51_FMTX_IRQ 53 -#define RX51_LP5523_CHIP_EN_GPIO 41 - -#define RX51_USB_TRANSCEIVER_RST_GPIO 67 - -#define RX51_TSC2005_RESET_GPIO 104 -#define RX51_TSC2005_IRQ_GPIO 100 - -#define LIS302_IRQ1_GPIO 181 -#define LIS302_IRQ2_GPIO 180 /* Not yet in use */ - -/* List all SPI devices here. Note that the list/probe order seems to matter! */ -enum { - RX51_SPI_WL1251, - RX51_SPI_TSC2005, /* Touch Controller */ - RX51_SPI_MIPID, /* LCD panel */ -}; - -static struct wl1251_platform_data wl1251_pdata; -static struct tsc2005_platform_data tsc2005_pdata; - -#if IS_ENABLED(CONFIG_SENSORS_LIS3_I2C) -static int lis302_setup(void) -{ - int err; - int irq1 = LIS302_IRQ1_GPIO; - int irq2 = LIS302_IRQ2_GPIO; - - /* gpio for interrupt pin 1 */ - err = gpio_request(irq1, "lis3lv02dl_irq1"); - if (err) { - printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); - goto out; - } - - /* gpio for interrupt pin 2 */ - err = gpio_request(irq2, "lis3lv02dl_irq2"); - if (err) { - gpio_free(irq1); - printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); - goto out; - } - - gpio_direction_input(irq1); - gpio_direction_input(irq2); - -out: - return err; -} - -static int lis302_release(void) -{ - gpio_free(LIS302_IRQ1_GPIO); - gpio_free(LIS302_IRQ2_GPIO); - - return 0; -} - -static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { - .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | - LIS3_CLICK_SINGLE_Z, - /* Limits are 0.5g * value */ - .click_thresh_x = 8, - .click_thresh_y = 8, - .click_thresh_z = 10, - /* Click must be longer than time limit */ - .click_time_limit = 9, - /* Kind of debounce filter */ - .click_latency = 50, - - /* Limits for all axis. millig-value / 18 to get HW values */ - .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, - .wakeup_thresh = 800 / 18, - .wakeup_flags2 = LIS3_WAKEUP_Z_HI , - .wakeup_thresh2 = 900 / 18, - - .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, - - /* Interrupt line 2 for click detection, line 1 for thresholds */ - .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, - - .axis_x = LIS3_DEV_X, - .axis_y = LIS3_INV_DEV_Y, - .axis_z = LIS3_INV_DEV_Z, - .setup_resources = lis302_setup, - .release_resources = lis302_release, - .st_min_limits = {-32, 3, 3}, - .st_max_limits = {-3, 32, 32}, -}; -#endif - -#if IS_ENABLED(CONFIG_SENSORS_TSL2563) -static struct tsl2563_platform_data rx51_tsl2563_platform_data = { - .cover_comp_gain = 16, -}; -#endif - -#if IS_ENABLED(CONFIG_LEDS_LP5523) -static struct lp55xx_led_config rx51_lp5523_led_config[] = { - { - .name = "lp5523:kb1", - .chan_nr = 0, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb2", - .chan_nr = 1, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb3", - .chan_nr = 2, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb4", - .chan_nr = 3, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:b", - .chan_nr = 4, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:g", - .chan_nr = 5, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:r", - .chan_nr = 6, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb5", - .chan_nr = 7, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb6", - .chan_nr = 8, - .led_current = 50, - .max_current = 100, - } -}; - -static struct lp55xx_platform_data rx51_lp5523_platform_data = { - .led_config = rx51_lp5523_led_config, - .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), - .clock_mode = LP55XX_CLOCK_AUTO, - .enable_gpio = RX51_LP5523_CHIP_EN_GPIO, -}; -#endif - -#define RX51_LCD_RESET_GPIO 90 - -static struct panel_acx565akm_platform_data acx_pdata = { - .name = "lcd", - .source = "sdi.0", - .reset_gpio = RX51_LCD_RESET_GPIO, - .datapairs = 2, -}; - -static struct omap2_mcspi_device_config wl1251_mcspi_config = { - .turbo_mode = 0, -}; - -static struct omap2_mcspi_device_config mipid_mcspi_config = { - .turbo_mode = 0, -}; - -static struct omap2_mcspi_device_config tsc2005_mcspi_config = { - .turbo_mode = 0, -}; - -static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { - [RX51_SPI_WL1251] = { - .modalias = "wl1251", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 48000000, - .mode = SPI_MODE_3, - .controller_data = &wl1251_mcspi_config, - .platform_data = &wl1251_pdata, - }, - [RX51_SPI_MIPID] = { - .modalias = "acx565akm", - .bus_num = 1, - .chip_select = 2, - .max_speed_hz = 6000000, - .controller_data = &mipid_mcspi_config, - .platform_data = &acx_pdata, - }, - [RX51_SPI_TSC2005] = { - .modalias = "tsc2005", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 6000000, - .controller_data = &tsc2005_mcspi_config, - .platform_data = &tsc2005_pdata, - }, -}; - -static struct platform_device rx51_battery_device = { - .name = "rx51-battery", - .id = -1, -}; - -static void rx51_charger_set_power(bool on) -{ - gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); -} - -static struct isp1704_charger_data rx51_charger_data = { - .set_power = rx51_charger_set_power, -}; - -static struct platform_device rx51_charger_device = { - .name = "isp1704_charger", - .dev = { - .platform_data = &rx51_charger_data, - }, -}; - -static void __init rx51_charger_init(void) -{ - WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_HIGH, "isp1704_reset")); - - platform_device_register(&rx51_battery_device); - platform_device_register(&rx51_charger_device); -} - -#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) - -#define RX51_GPIO_CAMERA_LENS_COVER 110 -#define RX51_GPIO_CAMERA_FOCUS 68 -#define RX51_GPIO_CAMERA_CAPTURE 69 -#define RX51_GPIO_KEYPAD_SLIDE 71 -#define RX51_GPIO_LOCK_BUTTON 113 -#define RX51_GPIO_PROXIMITY 89 - -#define RX51_GPIO_DEBOUNCE_TIMEOUT 10 - -static struct gpio_keys_button rx51_gpio_keys[] = { - { - .desc = "Camera Lens Cover", - .type = EV_SW, - .code = SW_CAMERA_LENS_COVER, - .gpio = RX51_GPIO_CAMERA_LENS_COVER, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Camera Focus", - .type = EV_KEY, - .code = KEY_CAMERA_FOCUS, - .gpio = RX51_GPIO_CAMERA_FOCUS, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Camera Capture", - .type = EV_KEY, - .code = KEY_CAMERA, - .gpio = RX51_GPIO_CAMERA_CAPTURE, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Lock Button", - .type = EV_KEY, - .code = KEY_SCREENLOCK, - .gpio = RX51_GPIO_LOCK_BUTTON, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Keypad Slide", - .type = EV_SW, - .code = SW_KEYPAD_SLIDE, - .gpio = RX51_GPIO_KEYPAD_SLIDE, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Proximity Sensor", - .type = EV_SW, - .code = SW_FRONT_PROXIMITY, - .gpio = RX51_GPIO_PROXIMITY, - .active_low = 0, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - } -}; - -static struct gpio_keys_platform_data rx51_gpio_keys_data = { - .buttons = rx51_gpio_keys, - .nbuttons = ARRAY_SIZE(rx51_gpio_keys), -}; - -static struct platform_device rx51_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &rx51_gpio_keys_data, - }, -}; - -static void __init rx51_add_gpio_keys(void) -{ - platform_device_register(&rx51_gpio_keys_device); -} -#else -static void __init rx51_add_gpio_keys(void) -{ -} -#endif /* IS_ENABLED(CONFIG_KEYBOARD_GPIO) */ - -static uint32_t board_keymap[] = { - /* - * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row - * connected to the ground" matrix state. - */ - KEY(0, 0, KEY_Q), - KEY(0, 1, KEY_O), - KEY(0, 2, KEY_P), - KEY(0, 3, KEY_COMMA), - KEY(0, 4, KEY_BACKSPACE), - KEY(0, 6, KEY_A), - KEY(0, 7, KEY_S), - - KEY(1, 0, KEY_W), - KEY(1, 1, KEY_D), - KEY(1, 2, KEY_F), - KEY(1, 3, KEY_G), - KEY(1, 4, KEY_H), - KEY(1, 5, KEY_J), - KEY(1, 6, KEY_K), - KEY(1, 7, KEY_L), - - KEY(2, 0, KEY_E), - KEY(2, 1, KEY_DOT), - KEY(2, 2, KEY_UP), - KEY(2, 3, KEY_ENTER), - KEY(2, 5, KEY_Z), - KEY(2, 6, KEY_X), - KEY(2, 7, KEY_C), - KEY(2, 8, KEY_F9), - - KEY(3, 0, KEY_R), - KEY(3, 1, KEY_V), - KEY(3, 2, KEY_B), - KEY(3, 3, KEY_N), - KEY(3, 4, KEY_M), - KEY(3, 5, KEY_SPACE), - KEY(3, 6, KEY_SPACE), - KEY(3, 7, KEY_LEFT), - - KEY(4, 0, KEY_T), - KEY(4, 1, KEY_DOWN), - KEY(4, 2, KEY_RIGHT), - KEY(4, 4, KEY_LEFTCTRL), - KEY(4, 5, KEY_RIGHTALT), - KEY(4, 6, KEY_LEFTSHIFT), - KEY(4, 8, KEY_F10), - - KEY(5, 0, KEY_Y), - KEY(5, 8, KEY_F11), - - KEY(6, 0, KEY_U), - - KEY(7, 0, KEY_I), - KEY(7, 1, KEY_F7), - KEY(7, 2, KEY_F8), -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data rx51_kp_data = { - .keymap_data = &board_map_data, - .rows = 8, - .cols = 8, - .rep = 1, -}; - -/* Enable input logic and pull all lines up when eMMC is on. */ -static struct omap_board_mux rx51_mmc2_on_mux[] = { - OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -/* Disable input logic and pull all lines down when eMMC is off. */ -static struct omap_board_mux rx51_mmc2_off_mux[] = { - OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static struct omap_mux_partition *partition; - -/* - * Current flows to eMMC when eMMC is off and the data lines are pulled up, - * so pull them down. N.B. we pull 8 lines because we are using 8 lines. - */ -static void rx51_mmc2_remux(struct device *dev, int power_on) -{ - if (power_on) - omap_mux_write_array(partition, rx51_mmc2_on_mux); - else - omap_mux_write_array(partition, rx51_mmc2_off_mux); -} - -static struct omap2_hsmmc_info mmc[] __initdata = { - { - .name = "external", - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .cover_only = true, - .gpio_cd = 160, - .gpio_wp = -EINVAL, - }, - { - .name = "internal", - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - /* See also rx51_mmc2_remux */ - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .nonremovable = true, - .remux = rx51_mmc2_remux, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply rx51_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply rx51_vaux2_supply[] = { - REGULATOR_SUPPLY("vdds_csib", "omap3isp"), -}; - -static struct regulator_consumer_supply rx51_vaux3_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { - /* tlv320aic3x analog supplies */ - REGULATOR_SUPPLY("AVDD", "2-0018"), - REGULATOR_SUPPLY("DRVDD", "2-0018"), - REGULATOR_SUPPLY("AVDD", "2-0019"), - REGULATOR_SUPPLY("DRVDD", "2-0019"), - /* tpa6130a2 */ - REGULATOR_SUPPLY("Vdd", "2-0060"), - /* Keep vmmc as last item. It is not iterated for newer boards */ - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vio_supplies[] = { - /* tlv320aic3x digital supplies */ - REGULATOR_SUPPLY("IOVDD", "2-0018"), - REGULATOR_SUPPLY("DVDD", "2-0018"), - REGULATOR_SUPPLY("IOVDD", "2-0019"), - REGULATOR_SUPPLY("DVDD", "2-0019"), - /* Si4713 IO supply */ - REGULATOR_SUPPLY("vio", "2-0063"), - /* lis3lv02d */ - REGULATOR_SUPPLY("Vdd_IO", "3-001d"), -}; - -static struct regulator_consumer_supply rx51_vaux1_consumers[] = { - REGULATOR_SUPPLY("vdds_sdi", "omapdss"), - REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"), - /* Si4713 supply */ - REGULATOR_SUPPLY("vdd", "2-0063"), - /* lis3lv02d */ - REGULATOR_SUPPLY("Vdd", "3-001d"), -}; - -static struct regulator_init_data rx51_vaux1 = { - .constraints = { - .name = "V28", - .min_uV = 2800000, - .max_uV = 2800000, - .always_on = true, /* due battery cover sensor */ - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), - .consumer_supplies = rx51_vaux1_consumers, -}; - -static struct regulator_init_data rx51_vaux2 = { - .constraints = { - .name = "VCSI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), - .consumer_supplies = rx51_vaux2_supply, -}; - -/* VAUX3 - adds more power to VIO_18 rail */ -static struct regulator_init_data rx51_vaux3_cam = { - .constraints = { - .name = "VCAM_DIG_18", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data rx51_vaux3_mmc = { - .constraints = { - .name = "VMMC2_30", - .min_uV = 2800000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), - .consumer_supplies = rx51_vaux3_supply, -}; - -static struct regulator_init_data rx51_vaux4 = { - .constraints = { - .name = "VCAM_ANA_28", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data rx51_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), - .consumer_supplies = rx51_vmmc1_supply, -}; - -static struct regulator_init_data rx51_vmmc2 = { - .constraints = { - .name = "V28_A", - .min_uV = 2800000, - .max_uV = 3000000, - .always_on = true, /* due VIO leak to AIC34 VDDs */ - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), - .consumer_supplies = rx51_vmmc2_supplies, -}; - -static struct regulator_init_data rx51_vpll1 = { - .constraints = { - .name = "VPLL", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vpll2 = { - .constraints = { - .name = "VSDI_CSI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vsim = { - .constraints = { - .name = "VMMC2_IO_18", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), - .consumer_supplies = rx51_vsim_supply, -}; - -static struct regulator_init_data rx51_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), - .consumer_supplies = rx51_vio_supplies, -}; - -static struct regulator_init_data rx51_vintana1 = { - .constraints = { - .name = "VINTANA1", - .min_uV = 1500000, - .max_uV = 1500000, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vintana2 = { - .constraints = { - .name = "VINTANA2", - .min_uV = 2750000, - .max_uV = 2750000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vintdig = { - .constraints = { - .name = "VINTDIG", - .min_uV = 1500000, - .max_uV = 1500000, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct gpiod_lookup_table rx51_fmtx_gpios_table = { - .dev_id = "2-0063", - .table = { - GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */ - { }, - }, -}; - -static __init void rx51_gpio_init(void) -{ - gpiod_add_lookup_table(&rx51_fmtx_gpios_table); -} - -static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) -{ - /* FIXME this gpio setup is just a placeholder for now */ - gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); - - return 0; -} - -static struct twl4030_gpio_platform_data rx51_gpio_data = { - .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) - | BIT(4) | BIT(5) - | BIT(8) | BIT(9) | BIT(10) | BIT(11) - | BIT(12) | BIT(13) | BIT(14) | BIT(15) - | BIT(16) | BIT(17) , - .setup = rx51_twlgpio_setup, -}; - -static struct twl4030_ins sleep_on_seq[] __initdata = { -/* - * Turn off everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, -}; - -static struct twl4030_script sleep_on_script __initdata = { - .script = sleep_on_seq, - .size = ARRAY_SIZE(sleep_on_seq), - .flags = TWL4030_SLEEP_SCRIPT, -}; - -static struct twl4030_ins wakeup_seq[] __initdata = { -/* - * Reenable everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wakeup_script __initdata = { - .script = wakeup_seq, - .size = ARRAY_SIZE(wakeup_seq), - .flags = TWL4030_WAKEUP12_SCRIPT, -}; - -static struct twl4030_ins wakeup_p3_seq[] __initdata = { -/* - * Reenable everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wakeup_p3_script __initdata = { - .script = wakeup_p3_seq, - .size = ARRAY_SIZE(wakeup_p3_seq), - .flags = TWL4030_WAKEUP3_SCRIPT, -}; - -static struct twl4030_ins wrst_seq[] __initdata = { -/* - * Reset twl4030. - * Reset VDD1 regulator. - * Reset VDD2 regulator. - * Reset VPLL1 regulator. - * Enable sysclk output. - * Reenable twl4030. - */ - {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), - 0x13}, - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, - {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wrst_script __initdata = { - .script = wrst_seq, - .size = ARRAY_SIZE(wrst_seq), - .flags = TWL4030_WRST_SCRIPT, -}; - -static struct twl4030_script *twl4030_scripts[] __initdata = { - /* wakeup12 script should be loaded before sleep script, otherwise a - board might hit retention before loading of wakeup script is - completed. This can cause boot failures depending on timing issues. - */ - &wakeup_script, - &sleep_on_script, - &wakeup_p3_script, - &wrst_script, -}; - -static struct twl4030_resconfig twl4030_rconfig[] __initdata = { - { .resource = RES_VDD1, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VDD2, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VPLL1, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VPLL2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX1, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX3, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX4, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VMMC1, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VMMC2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VDAC, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VSIM, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VIO, .devgroup = DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_32KCLKOUT, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_RESET, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_MAIN_REF, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { 0, 0}, -}; - -static struct twl4030_power_data rx51_t2scripts_data __initdata = { - .scripts = twl4030_scripts, - .num = ARRAY_SIZE(twl4030_scripts), - .resource_config = twl4030_rconfig, -}; - -static struct twl4030_vibra_data rx51_vibra_data __initdata = { - .coexist = 0, -}; - -static struct twl4030_audio_data rx51_audio_data __initdata = { - .audio_mclk = 26000000, - .vibra = &rx51_vibra_data, -}; - -static struct twl4030_platform_data rx51_twldata __initdata = { - /* platform_data for children goes here */ - .gpio = &rx51_gpio_data, - .keypad = &rx51_kp_data, - .power = &rx51_t2scripts_data, - .audio = &rx51_audio_data, - - .vaux1 = &rx51_vaux1, - .vaux2 = &rx51_vaux2, - .vaux4 = &rx51_vaux4, - .vmmc1 = &rx51_vmmc1, - .vpll1 = &rx51_vpll1, - .vpll2 = &rx51_vpll2, - .vsim = &rx51_vsim, - .vintana1 = &rx51_vintana1, - .vintana2 = &rx51_vintana2, - .vintdig = &rx51_vintdig, - .vio = &rx51_vio, -}; - -static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { - .power_gpio = 98, -}; - -/* Audio setup data */ -static struct aic3x_setup_data rx51_aic34_setup = { - .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, - .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, -}; - -static struct aic3x_pdata rx51_aic3x_data = { - .setup = &rx51_aic34_setup, - .gpio_reset = 60, -}; - -static struct aic3x_pdata rx51_aic3x_data2 = { - .gpio_reset = 60, -}; - -#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) -static struct si4713_platform_data rx51_si4713_platform_data = { - .is_platform_device = true -}; -#endif - -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { -#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) - { - I2C_BOARD_INFO("si4713", 0x63), - .platform_data = &rx51_si4713_platform_data, - }, -#endif - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - .platform_data = &rx51_aic3x_data, - }, - { - I2C_BOARD_INFO("tlv320aic3x", 0x19), - .platform_data = &rx51_aic3x_data2, - }, -#if IS_ENABLED(CONFIG_SENSORS_TSL2563) - { - I2C_BOARD_INFO("tsl2563", 0x29), - .platform_data = &rx51_tsl2563_platform_data, - }, -#endif -#if IS_ENABLED(CONFIG_LEDS_LP5523) - { - I2C_BOARD_INFO("lp5523", 0x32), - .platform_data = &rx51_lp5523_platform_data, - }, -#endif - { - I2C_BOARD_INFO("bq27200", 0x55), - }, - { - I2C_BOARD_INFO("tpa6130a2", 0x60), - .platform_data = &rx51_tpa6130a2_data, - } -}; - -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { -#if IS_ENABLED(CONFIG_SENSORS_LIS3_I2C) - { - I2C_BOARD_INFO("lis3lv02d", 0x1d), - .platform_data = &rx51_lis3lv02d_data, - }, -#endif -}; - -static int __init rx51_i2c_init(void) -{ -#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) - int err; -#endif - - if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || - system_rev >= SYSTEM_REV_B_USES_VAUX3) { - rx51_twldata.vaux3 = &rx51_vaux3_mmc; - /* Only older boards use VMMC2 for internal MMC */ - rx51_vmmc2.num_consumer_supplies--; - } else { - rx51_twldata.vaux3 = &rx51_vaux3_cam; - } - rx51_twldata.vmmc2 = &rx51_vmmc2; - omap3_pmic_get_config(&rx51_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, - TWL_COMMON_REGULATOR_VDAC); - - rx51_twldata.vdac->constraints.apply_uV = true; - rx51_twldata.vdac->constraints.name = "VDAC"; - - omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); -#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) - err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); - if (err) { - printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); - return err; - } - rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ); -#endif - omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); -#if IS_ENABLED(CONFIG_SENSORS_LIS3_I2C) - rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); - rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); -#endif - omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); - return 0; -} - -#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) - -static struct mtd_partition onenand_partitions[] = { - { - .name = "bootloader", - .offset = 0, - .size = 0x20000, - .mask_flags = MTD_WRITEABLE, /* Force read-only */ - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 0x60000, - }, - { - .name = "log", - .offset = MTDPART_OFS_APPEND, - .size = 0x40000, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 0x200000, - }, - { - .name = "initfs", - .offset = MTDPART_OFS_APPEND, - .size = 0x200000, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data board_onenand_data[] = { - { - .cs = 0, - .gpio_irq = 65, - .parts = onenand_partitions, - .nr_parts = ARRAY_SIZE(onenand_partitions), - .flags = ONENAND_SYNC_READWRITE, - } -}; -#endif - -static struct gpio rx51_wl1251_gpios[] __initdata = { - { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, -}; - -static void __init rx51_init_wl1251(void) -{ - int irq, ret; - - ret = gpio_request_array(rx51_wl1251_gpios, - ARRAY_SIZE(rx51_wl1251_gpios)); - if (ret < 0) - goto error; - - irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); - if (irq < 0) - goto err_irq; - - wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO; - rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; - - return; - -err_irq: - gpio_free(RX51_WL1251_IRQ_GPIO); -error: - printk(KERN_ERR "wl1251 board initialisation failed\n"); - wl1251_pdata.power_gpio = -1; - - /* - * Now rx51_peripherals_spi_board_info[1].irq is zero and - * set_power is null, and wl1251_probe() will fail. - */ -} - -static struct tsc2005_platform_data tsc2005_pdata = { - .ts_pressure_max = 2048, - .ts_pressure_fudge = 2, - .ts_x_max = 4096, - .ts_x_fudge = 4, - .ts_y_max = 4096, - .ts_y_fudge = 7, - .ts_x_plate_ohm = 280, - .esd_timeout_ms = 8000, -}; - -static struct gpio rx51_tsc2005_gpios[] __initdata = { - { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, - { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, -}; - -static void rx51_tsc2005_set_reset(bool enable) -{ - gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); -} - -static void __init rx51_init_tsc2005(void) -{ - int r; - - omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); - - r = gpio_request_array(rx51_tsc2005_gpios, - ARRAY_SIZE(rx51_tsc2005_gpios)); - if (r < 0) { - printk(KERN_ERR "tsc2005 board initialization failed\n"); - tsc2005_pdata.esd_timeout_ms = 0; - return; - } - - tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; - rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = - gpio_to_irq(RX51_TSC2005_IRQ_GPIO); -} - -#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) -static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = { - .request_by_node = omap_dm_timer_request_by_node, - .request_specific = omap_dm_timer_request_specific, - .request = omap_dm_timer_request, - .set_source = omap_dm_timer_set_source, - .get_irq = omap_dm_timer_get_irq, - .set_int_enable = omap_dm_timer_set_int_enable, - .set_int_disable = omap_dm_timer_set_int_disable, - .free = omap_dm_timer_free, - .enable = omap_dm_timer_enable, - .disable = omap_dm_timer_disable, - .get_fclk = omap_dm_timer_get_fclk, - .start = omap_dm_timer_start, - .stop = omap_dm_timer_stop, - .set_load = omap_dm_timer_set_load, - .set_match = omap_dm_timer_set_match, - .set_pwm = omap_dm_timer_set_pwm, - .set_prescaler = omap_dm_timer_set_prescaler, - .read_counter = omap_dm_timer_read_counter, - .write_counter = omap_dm_timer_write_counter, - .read_status = omap_dm_timer_read_status, - .write_status = omap_dm_timer_write_status, -}; -#endif - -#if IS_ENABLED(CONFIG_IR_RX51) -static struct lirc_rx51_platform_data rx51_lirc_data = { - .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, -}; - -static struct platform_device rx51_lirc_device = { - .name = "lirc_rx51", - .id = -1, - .dev = { - .platform_data = &rx51_lirc_data, - }, -}; - -static void __init rx51_init_lirc(void) -{ - platform_device_register(&rx51_lirc_device); -} -#else -static void __init rx51_init_lirc(void) -{ -} -#endif - -static struct platform_device madc_hwmon = { - .name = "twl4030_madc_hwmon", - .id = -1, -}; - -static void __init rx51_init_twl4030_hwmon(void) -{ - platform_device_register(&madc_hwmon); -} - -static struct platform_device omap3_rom_rng_device = { - .name = "omap3-rom-rng", - .id = -1, - .dev = { - .platform_data = rx51_secure_rng_call, - }, -}; - -static void __init rx51_init_omap3_rom_rng(void) -{ - if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { - pr_info("RX-51: Registering OMAP3 HWRNG device\n"); - platform_device_register(&omap3_rom_rng_device); - } -} - -void __init rx51_peripherals_init(void) -{ - rx51_gpio_init(); - rx51_i2c_init(); - regulator_has_full_constraints(); - gpmc_onenand_init(board_onenand_data); - rx51_add_gpio_keys(); - rx51_init_wl1251(); - rx51_init_tsc2005(); - rx51_init_lirc(); - spi_register_board_info(rx51_peripherals_spi_board_info, - ARRAY_SIZE(rx51_peripherals_spi_board_info)); - - partition = omap_mux_get("core"); - if (partition) - omap_hsmmc_init(mmc); - - rx51_charger_init(); - rx51_init_twl4030_hwmon(); - rx51_init_omap3_rom_rng(); -} - diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c deleted file mode 100644 index ef5cbb6f4c47..000000000000 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-rx51-video.c - * - * Copyright (C) 2010 Nokia - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/spi/spi.h> -#include <linux/mm.h> -#include <asm/mach-types.h> -#include <linux/platform_data/omapdss.h> -#include <video/omap-panel-data.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "soc.h" -#include "board-rx51.h" -#include "display.h" - -#include "mux.h" - -#define RX51_LCD_RESET_GPIO 90 - -#if IS_ENABLED(CONFIG_FB_OMAP2) - -static struct connector_atv_platform_data rx51_tv_pdata = { - .name = "tv", - .source = "venc.0", - .invert_polarity = false, -}; - -static struct platform_device rx51_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &rx51_tv_pdata, -}; - -static struct omap_dss_board_info rx51_dss_board_info = { - .default_display_name = "lcd", -}; - -static int __init rx51_video_init(void) -{ - if (!machine_is_nokia_rx51()) - return 0; - - if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { - pr_err("%s cannot configure MUX for LCD RESET\n", __func__); - return 0; - } - - omap_display_init(&rx51_dss_board_info); - - platform_device_register(&rx51_tv_connector_device); - - return 0; -} - -omap_subsys_initcall(rx51_video_init); -#endif /* IS_ENABLED(CONFIG_FB_OMAP2) */ diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c deleted file mode 100644 index 41161ca97d74..000000000000 --- a/arch/arm/mach-omap2/board-rx51.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Board support file for Nokia N900 (aka RX-51). - * - * Copyright (C) 2007, 2008 Nokia - * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> - * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/usb/phy.h> -#include <linux/usb/musb.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/omap-dma.h> - -#include "common.h" -#include "mux.h" -#include "gpmc.h" -#include "pm.h" -#include "soc.h" -#include "sdram-nokia.h" -#include "omap-secure.h" - -#define RX51_GPIO_SLEEP_IND 162 - -static struct gpio_led gpio_leds[] = { - { - .name = "sleep_ind", - .gpio = RX51_GPIO_SLEEP_IND, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -/* - * cpuidle C-states definition for rx51. - * - * The 'exit_latency' field is the sum of sleep - * and wake-up latencies. - - --------------------------------------------- - | state | exit_latency | target_residency | - --------------------------------------------- - | C1 | 110 + 162 | 5 | - | C2 | 106 + 180 | 309 | - | C3 | 107 + 410 | 46057 | - | C4 | 121 + 3374 | 46057 | - | C5 | 855 + 1146 | 46057 | - | C6 | 7580 + 4134 | 484329 | - | C7 | 7505 + 15274 | 484329 | - --------------------------------------------- - -*/ - -extern void __init rx51_peripherals_init(void); - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 0, -}; - -static void __init rx51_init(void) -{ - struct omap_sdrc_params *sdrc_params; - - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_serial_init(); - - sdrc_params = nokia_get_sdram_timings(); - omap_sdrc_init(sdrc_params, sdrc_params); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(&musb_board_data); - rx51_peripherals_init(); - - if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { -#ifdef CONFIG_ARM_ERRATA_430973 - pr_info("RX-51: Enabling ARM errata 430973 workaround\n"); - /* set IBE to 1 */ - rx51_secure_update_aux_cr(BIT(6), 0); -#endif - } - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - platform_device_register(&leds_gpio); -} - -static void __init rx51_reserve(void) -{ - omap_reserve(); -} - -MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") - /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ - .atag_offset = 0x100, - .reserve = rx51_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .init_machine = rx51_init, - .init_late = omap3430_init_late, - .init_time = omap_init_time, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h deleted file mode 100644 index b76f49e7eed5..000000000000 --- a/arch/arm/mach-omap2/board-rx51.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * Defines for rx51 boards - */ - -#ifndef _OMAP_BOARD_RX51_H -#define _OMAP_BOARD_RX51_H - -extern void __init rx51_peripherals_init(void); -extern void __init rx51_video_mem_init(void); - -#endif |