summaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x/mv2120-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-orion5x/mv2120-setup.c')
-rw-r--r--arch/arm/mach-orion5x/mv2120-setup.c239
1 files changed, 239 insertions, 0 deletions
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
new file mode 100644
index 000000000000..55f3b0fdef8b
--- /dev/null
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+#define MV2120_NOR_BOOT_BASE 0xf4000000
+#define MV2120_NOR_BOOT_SIZE SZ_512K
+
+#define MV2120_GPIO_RTC_IRQ 3
+#define MV2120_GPIO_KEY_RESET 17
+#define MV2120_GPIO_KEY_POWER 18
+#define MV2120_GPIO_POWER_OFF 19
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data mv2120_eth_data = {
+ .phy_addr = 8,
+};
+
+static struct mv_sata_platform_data mv2120_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mtd_partition mv2120_partitions[] = {
+ {
+ .name = "firmware",
+ .size = 0x00080000,
+ .offset = 0,
+ },
+};
+
+static struct physmap_flash_data mv2120_nor_flash_data = {
+ .width = 1,
+ .parts = mv2120_partitions,
+ .nr_parts = ARRAY_SIZE(mv2120_partitions)
+};
+
+static struct resource mv2120_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = MV2120_NOR_BOOT_BASE,
+ .end = MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mv2120_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mv2120_nor_flash_data,
+ },
+ .resource = &mv2120_nor_flash_resource,
+ .num_resources = 1,
+};
+
+static struct gpio_keys_button mv2120_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = MV2120_GPIO_KEY_RESET,
+ .desc = "reset",
+ .active_low = 1,
+ }, {
+ .code = KEY_POWER,
+ .gpio = MV2120_GPIO_KEY_POWER,
+ .desc = "power",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data mv2120_button_data = {
+ .buttons = mv2120_buttons,
+ .nbuttons = ARRAY_SIZE(mv2120_buttons),
+};
+
+static struct platform_device mv2120_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &mv2120_button_data,
+ },
+};
+
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Sys status LED */
+ { 1, MPP_GPIO }, /* Sys error LED */
+ { 2, MPP_GPIO }, /* OverTemp interrupt */
+ { 3, MPP_GPIO }, /* RTC interrupt */
+ { 4, MPP_GPIO }, /* V_LED 5V */
+ { 5, MPP_GPIO }, /* V_LED 3.3V */
+ { 6, MPP_UNUSED },
+ { 7, MPP_UNUSED },
+ { 8, MPP_GPIO }, /* SATA 0 fail LED */
+ { 9, MPP_GPIO }, /* SATA 1 fail LED */
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_SATA_LED }, /* SATA 0 presence */
+ { 13, MPP_SATA_LED }, /* SATA 1 presence */
+ { 14, MPP_SATA_LED }, /* SATA 0 active */
+ { 15, MPP_SATA_LED }, /* SATA 1 active */
+ { 16, MPP_UNUSED },
+ { 17, MPP_GPIO }, /* Reset button */
+ { 18, MPP_GPIO }, /* Power button */
+ { 19, MPP_GPIO }, /* Power off */
+ { -1 },
+};
+
+static struct i2c_board_info __initdata mv2120_i2c_rtc = {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ .irq = 0,
+};
+
+static struct gpio_led mv2120_led_pins[] = {
+ {
+ .name = "mv2120:blue:health",
+ .gpio = 0,
+ },
+ {
+ .name = "mv2120:red:health",
+ .gpio = 1,
+ },
+ {
+ .name = "mv2120:led:bright",
+ .gpio = 4,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "mv2120:led:dimmed",
+ .gpio = 5,
+ },
+ {
+ .name = "mv2120:red:sata0",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "mv2120:red:sata1",
+ .gpio = 9,
+ .active_low = 1,
+ },
+
+};
+
+static struct gpio_led_platform_data mv2120_led_data = {
+ .leds = mv2120_led_pins,
+ .num_leds = ARRAY_SIZE(mv2120_led_pins),
+};
+
+static struct platform_device mv2120_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mv2120_led_data,
+ }
+};
+
+static void mv2120_power_off(void)
+{
+ pr_info("%s: triggering power-off...\n", __func__);
+ gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
+}
+
+static void __init mv2120_init(void)
+{
+ /* Setup basic Orion functions. Need to be called early. */
+ orion5x_init();
+
+ orion5x_mpp_conf(mv2120_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&mv2120_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&mv2120_sata_data);
+ orion5x_uart0_init();
+
+ orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
+ platform_device_register(&mv2120_nor_flash);
+
+ platform_device_register(&mv2120_button_device);
+
+ if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
+ if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
+ mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
+ else
+ gpio_free(MV2120_GPIO_RTC_IRQ);
+ }
+ i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+ platform_device_register(&mv2120_leds);
+
+ /* register mv2120 specific power-off method */
+ if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+ gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
+ pr_err("mv2120: failed to setup power-off GPIO\n");
+ pm_power_off = mv2120_power_off;
+}
+
+/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(MV2120, "HP Media Vault mv2120")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = mv2120_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32
+MACHINE_END