1 files changed, 111 insertions, 36 deletions

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index d3260542b943..d440e5f456ad 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+	int ret = 0;
+
+	if (rate <= 0)
+		return ret;
+
+	if (enable) {
+		ret = clk_set_rate(clk, rate);
+		if (0 == ret)
+			ret = clk_enable(clk);
+	} else {
+		clk_disable(clk);
+	}
+
+	return ret;
+}
+
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
 
-static int fsi_set_rate(int is_porta, int rate)
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+	struct clk *fsia_ick;
+	struct clk *fsiack;
+	int ret = -EIO;
+
+	fsia_ick = clk_get(dev, "icka");
+	if (IS_ERR(fsia_ick))
+		return PTR_ERR(fsia_ick);
+
+	/*
+	 * FSIACK is connected to AK4642,
+	 * and use external clock pin from it.
+	 * it is parent of fsia_ick now.
+	 */
+	fsiack = clk_get_parent(fsia_ick);
+	if (!fsiack)
+		goto fsia_ick_out;
+
+	/*
+	 * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+	 *
+	 ** FIXME **
+	 * Because the freq_table of external clk (fsiack) are all 0,
+	 * the return value of clk_round_rate became 0.
+	 * So, it use __fsi_set_rate here.
+	 */
+	ret = __fsi_set_rate(fsiack, rate, enable);
+	if (ret < 0)
+		goto fsiack_out;
+
+	ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+	if ((ret < 0) && enable)
+		__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+	clk_put(fsiack);
+
+fsia_ick_out:
+	clk_put(fsia_ick);
+
+	return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
 	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
 	int ret;
 
-	/* set_rate is not needed if port A */
-	if (is_porta)
-		return 0;
-
-	fsib_clk = clk_get(NULL, "fsib_clk");
-	if (IS_ERR(fsib_clk))
-		return -EINVAL;
-
 	switch (rate) {
 	case 44100:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	case 48000:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
+		fdiv_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	default:
 		pr_err("unsupported rate in FSI2 port B\n");
-		ret = -EINVAL;
-		break;
+		return -EINVAL;
 	}
 
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
+
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
 	clk_put(fsib_clk);
+	if (ret < 0)
+		return ret;
+
+	/* FSI DIV setting */
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+		return ret;
+	}
+
+	return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+	int ret;
+
+	if (is_porta)
+		ret = fsi_ak4642_set_rate(dev, rate, enable);
+	else
+		ret = fsi_hdmi_set_rate(dev, rate, enable);
 
 	return ret;
 }
@@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
 		goto out;
 	}
 
+	ret = clk_enable(&sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot enable pllc2 clock\n");
+		goto out;
+	}
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -896,23 +990,11 @@ out:
 
 device_initcall(hdmi_init_pm_clock);
 
-#define FSIACK_DUMMY_RATE 48000
 static int __init fsi_init_pm_clock(void)
 {
 	struct clk *fsia_ick;
 	int ret;
 
-	/*
-	 * FSIACK is connected to AK4642,
-	 * and the rate is depend on playing sound rate.
-	 * So, set dummy rate (= 48k) here
-	 */
-	ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
-	if (ret < 0) {
-		pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
-		return ret;
-	}
-
 	fsia_ick = clk_get(&fsi_device.dev, "icka");
 	if (IS_ERR(fsia_ick)) {
 		ret = PTR_ERR(fsia_ick);
@@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void)
 	}
 
 	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-	if (ret < 0) {
-		pr_err("Cannot set FSI-A parent: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
 	if (ret < 0)
-		pr_err("Cannot set FSI-A rate: %d\n", ret);
+		pr_err("Cannot set FSI-A parent: %d\n", ret);
 
-out:
 	clk_put(fsia_ick);
 
 	return ret;