diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi | 490 |
1 files changed, 490 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi new file mode 100644 index 000000000000..9069dbea6339 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2019-2021 Toradex + */ + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + /* MXM3_188 */ + led4-green { + label = "LED_4_GREEN"; + gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>; + }; + /* MXM3_178 */ + led4-red { + label = "LED_4_RED"; + gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>; + }; + /* MXM3_152 */ + led5-green { + label = "LED_5_GREEN"; + gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; + }; + /* MXM3_156 */ + led5-red { + label = "LED_5_RED"; + gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + regulator-name = "VCC_USBH(2|4)"; + }; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + + /* MMC1_PWR_CTRL */ + gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>; + }; + + reg_can1_supply: regulator-can1-supply { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + regulator-name = "can1_supply"; + gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <1000>; + }; + + reg_can2_supply: regulator-can2-supply { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sata1_act>; + regulator-name = "can2_supply"; + gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <1000>; + }; + +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&amix { + status = "okay"; +}; + +&asrc0 { + status = "okay"; +}; + +&backlight { + default-brightness-level = <4>; + brightness-levels = <0 45 63 88 119 158 203 255>; + pwms = <&pwm_lvds1 0 6666667 PWM_POLARITY_INVERTED>; + status = "okay"; +}; + +&dc0_dpr1_channel1 { + status = "okay"; +}; + +&dc0_dpr1_channel2 { + status = "okay"; +}; + +&dc0_dpr1_channel3 { + status = "okay"; +}; + +&dc0_dpr2_channel1 { + status = "okay"; +}; + +&dc0_dpr2_channel2 { + status = "okay"; +}; + +&dc0_dpr2_channel3 { + status = "okay"; +}; + +&dc0_pc { + status = "okay"; +}; + +&dc0_prg1 { + status = "okay"; +}; + +&dc0_prg2 { + status = "okay"; +}; + +&dc0_prg3 { + status = "okay"; +}; + +&dc0_prg4 { + status = "okay"; +}; + +&dc0_prg5 { + status = "okay"; +}; + +&dc0_prg6 { + status = "okay"; +}; + +&dc0_prg7 { + status = "okay"; +}; + +&dc0_prg8 { + status = "okay"; +}; + +&dc0_prg9 { + status = "okay"; +}; + +&dc1_dpr1_channel1 { + status = "okay"; +}; + +&dc1_dpr1_channel2 { + status = "okay"; +}; + +&dc1_dpr1_channel3 { + status = "okay"; +}; + +&dc1_dpr2_channel1 { + status = "okay"; +}; + +&dc1_dpr2_channel2 { + status = "okay"; +}; + +&dc1_dpr2_channel3 { + status = "okay"; +}; + +&dc1_pc { + status = "okay"; +}; + +&dc1_prg1 { + status = "okay"; +}; + +&dc1_prg2 { + status = "okay"; +}; + +&dc1_prg3 { + status = "okay"; +}; + +&dc1_prg4 { + status = "okay"; +}; + +&dc1_prg5 { + status = "okay"; +}; + +&dc1_prg6 { + status = "okay"; +}; + +&dc1_prg7 { + status = "okay"; +}; + +&dc1_prg8 { + status = "okay"; +}; + +&dc1_prg9 { + status = "okay"; +}; + +&dpu1 { + status = "okay"; +}; + +&dpu2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&gpu_3d0{ + status = "okay"; +}; + +&gpu_3d1{ + status = "okay"; +}; + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + atmel_mxt_ts: atmel_mxt_ts@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>; + reg = <0x4a>; + interrupt-parent = <&lsio_gpio4>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* Apalis GPIO5 */ + reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_HIGH>; /* Apalis GPIO6 */ + status = "disabled"; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + status = "okay"; +}; + +&imx8_gpu_ss { + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>, + <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>, + <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>, + <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>, + <&pinctrl_qspi1a_gpios>, <&pinctrl_sim0_gpios>, + <&pinctrl_usdhc1_gpios>, <&pinctrl_uart24_forceoff>; + + apalis-imx8qm { + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = < + IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27 0x06000061 /* LED_4_GREEN */ + IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29 0x06000061 /* LED_4_RED */ + IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20 0x06000061 /* LED_5_GREEN */ + IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x06000061 /* LED_5_RED */ + >; + }; + + pinctrl_uart24_forceoff: uart24forceoffgrp { + fsl,pins = < + IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25 0x21 + >; + }; + + /* PMIC MMC1 power-switch */ + pinctrl_enable_3v3_vmmc: enable_3v3_vmmc { + fsl,pins = < + IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19 0x00000021 /* MXM3_148, PMIC */ + >; + }; + + /* FlexCAN PMIC */ + pinctrl_enable_can1_power: enable_can1_power { + fsl,pins = < + IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021 /* MXM3_158, PMIC */ + >; + }; + }; +}; + +&irqsteer_csi0 { + status = "okay"; +}; + +&irqsteer_csi1 { + status = "okay"; +}; + +&lsio_gpio5 { + ngpios = <32>; + gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03", + "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07", + "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11", + "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15", + "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19", + "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23", + "gpio5-24", "UART24-FORCEOFF", "gpio5-26", + "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30", + "gpio5-31"; +}; + +/* Apalis SPI1 */ +&lpspi0 { + status = "okay"; +}; + +/* Apalis SPI2 */ +&lpspi2 { + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + status = "okay"; +}; + +/* Apalis PCIE1 */ +&pciea{ + status = "okay"; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&pwm0 { + status = "okay"; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&pwm1 { + status = "okay"; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&pwm2 { + status = "okay"; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&pwm3 { + status = "okay"; +}; + +&pwm_lvds1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_bkl>; + status = "okay"; +}; + +&sai1 { + status = "okay"; +}; + +&sai5 { + status = "okay"; +}; + +&sai5_lpcg { + status = "okay"; +}; + +/* Apalis SATA1 */ +&sata { + status = "okay"; +}; + +/* Apalis SPDIF1 */ +&spdif0 { + status = "okay"; +}; + +&spdif1 { + status = "okay"; +}; + +&spdif1_lpcg { + status = "okay"; +}; + +/* Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +/* Apalis USBO1 */ +&usbotg1 { + status = "okay"; +}; + +/* Apalis USBH4 SuperSpeed */ +&usbotg3 { + dr_mode = "host"; + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>; + bus-width = <4>; + cap-power-off-card; + vmmc-supply = <®_3v3_vmmc>; + /delete-property/ no-1-8-v; + status = "okay"; +}; + +&vpu_decoder { + status = "okay"; +}; + +&vpu_encoder { + status = "okay"; +}; + +/* Apalis CAN1 */ +&flexcan1 { + xceiver-supply = <®_can1_supply>; + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + xceiver-supply = <®_can2_supply>; + status = "okay"; +}; |