summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/configs/s3c6400_defconfig130
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-core.h34
-rw-r--r--arch/arm/mach-s3c2410/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/map.h3
-rw-r--r--arch/arm/mach-s3c2410/mach-amlm5900.c4
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c7
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c4
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c6
-rw-r--r--arch/arm/mach-s3c2410/mach-otom.c4
-rw-r--r--arch/arm/mach-s3c2410/mach-qt2410.c4
-rw-r--r--arch/arm/mach-s3c2410/mach-smdk2410.c4
-rw-r--r--arch/arm/mach-s3c2410/mach-tct_hammer.c4
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c4
-rw-r--r--arch/arm/mach-s3c2412/mach-jive.c9
-rw-r--r--arch/arm/mach-s3c2412/mach-smdk2413.c4
-rw-r--r--arch/arm/mach-s3c2412/mach-vstms.c4
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c4
-rw-r--r--arch/arm/mach-s3c2440/mach-at2440evb.c5
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c4
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c5
-rw-r--r--arch/arm/mach-s3c2440/mach-rx3715.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-smdk2440.c4
-rw-r--r--arch/arm/mach-s3c2443/Kconfig1
-rw-r--r--arch/arm/mach-s3c2443/mach-smdk2443.c6
-rw-r--r--arch/arm/mach-s3c24a0/include/mach/map.h2
-rw-r--r--arch/arm/mach-s3c6400/include/mach/gpio-core.h21
-rw-r--r--arch/arm/mach-s3c6400/include/mach/gpio.h76
-rw-r--r--arch/arm/mach-s3c6400/include/mach/map.h15
-rw-r--r--arch/arm/mach-s3c6400/include/mach/regs-fb.h259
-rw-r--r--arch/arm/mach-s3c6410/Kconfig41
-rw-r--r--arch/arm/mach-s3c6410/Makefile4
-rw-r--r--arch/arm/mach-s3c6410/cpu.c10
-rw-r--r--arch/arm/mach-s3c6410/mach-smdk6410.c96
-rw-r--r--arch/arm/mach-s3c6410/setup-sdhci.c102
-rw-r--r--arch/arm/plat-s3c/Kconfig70
-rw-r--r--arch/arm/plat-s3c/Makefile12
-rw-r--r--arch/arm/plat-s3c/dev-fb.c72
-rw-r--r--arch/arm/plat-s3c/dev-hsmmc.c68
-rw-r--r--arch/arm/plat-s3c/dev-hsmmc1.c68
-rw-r--r--arch/arm/plat-s3c/dev-i2c0.c71
-rw-r--r--arch/arm/plat-s3c/dev-i2c1.c68
-rw-r--r--arch/arm/plat-s3c/gpio-config.c163
-rw-r--r--arch/arm/plat-s3c/gpio.c147
-rw-r--r--arch/arm/plat-s3c/include/plat/devs.h8
-rw-r--r--arch/arm/plat-s3c/include/plat/fb.h73
-rw-r--r--arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h176
-rw-r--r--arch/arm/plat-s3c/include/plat/gpio-cfg.h110
-rw-r--r--arch/arm/plat-s3c/include/plat/gpio-core.h77
-rw-r--r--arch/arm/plat-s3c/include/plat/iic-core.h35
-rw-r--r--arch/arm/plat-s3c/include/plat/iic.h24
-rw-r--r--arch/arm/plat-s3c/include/plat/regs-fb.h366
-rw-r--r--arch/arm/plat-s3c/include/plat/regs-sdhci.h87
-rw-r--r--arch/arm/plat-s3c/include/plat/sdhci.h108
-rw-r--r--arch/arm/plat-s3c24xx/Makefile3
-rw-r--r--arch/arm/plat-s3c24xx/devs.c55
-rw-r--r--arch/arm/plat-s3c24xx/gpiolib.c125
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/map.h1
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x.c2
-rw-r--r--arch/arm/plat-s3c24xx/setup-i2c.c25
-rw-r--r--arch/arm/plat-s3c64xx/Kconfig25
-rw-r--r--arch/arm/plat-s3c64xx/Makefile7
-rw-r--r--arch/arm/plat-s3c64xx/gpiolib.c420
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h48
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h60
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h53
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h49
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h44
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h71
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h42
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h74
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h40
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h36
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h54
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h70
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h69
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h46
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/irqs.h5
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/regs-gpio.h35
-rw-r--r--arch/arm/plat-s3c64xx/setup-fb-24bpp.c37
-rw-r--r--arch/arm/plat-s3c64xx/setup-i2c0.c31
-rw-r--r--arch/arm/plat-s3c64xx/setup-i2c1.c31
81 files changed, 4027 insertions, 218 deletions
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 3a50716d443b..cf3c1b5d7048 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Fri Oct 17 09:20:54 2008
+# Linux kernel version: 2.6.28-rc3
+# Mon Nov 3 10:10:30 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -116,6 +116,7 @@ CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
@@ -152,16 +153,17 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C24A0 is not set
CONFIG_ARCH_S3C64XX=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
CONFIG_PLAT_S3C64XX=y
CONFIG_CPU_S3C6400_INIT=y
CONFIG_CPU_S3C6400_CLOCK=y
+CONFIG_S3C64XX_SETUP_I2C0=y
+CONFIG_S3C64XX_SETUP_I2C1=y
CONFIG_PLAT_S3C=y
#
@@ -173,8 +175,19 @@ CONFIG_S3C_BOOT_ERROR_RESET=y
# Power management
#
CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_I2C1=y
CONFIG_CPU_S3C6410=y
+CONFIG_S3C6410_SETUP_SDHCI=y
CONFIG_MACH_SMDK6410=y
+CONFIG_SMDK6410_SD_CH0=y
+# CONFIG_SMDK6410_SD_CH1 is not set
#
# Processor Type
@@ -233,8 +246,10 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -266,6 +281,7 @@ CONFIG_VFP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -356,6 +372,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
@@ -400,6 +417,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C6400=y
@@ -414,7 +432,52 @@ CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_S3C2410=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -424,6 +487,9 @@ CONFIG_GPIOLIB=y
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
@@ -436,14 +502,52 @@ CONFIG_GPIOLIB=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
@@ -465,12 +569,13 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
@@ -546,6 +651,7 @@ CONFIG_SDIO_UART=y
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
@@ -691,11 +797,17 @@ CONFIG_FRAME_POINTER=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
new file mode 100644
index 000000000000..6c9fbb99ef14
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -0,0 +1,34 @@
+/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+#include <plat/gpio-core.h>
+#include <mach/regs-gpio.h>
+
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+{
+ struct s3c_gpio_chip *chip;
+
+ if (pin > S3C2410_GPG10)
+ return NULL;
+
+ chip = &s3c24xx_gpios[pin/32];
+ return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+}
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 950c71bf1489..fa8764b05692 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -134,6 +134,8 @@
#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */
#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
+#define IRQ_HSMMC0 IRQ_S3C2443_HSMMC
+
#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 918e3463297f..255fdfeaf957 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -92,7 +92,6 @@
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC S3C2410_PA_IIC
#define S3C24XX_PA_IIS S3C2410_PA_IIS
#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_PA_RTC S3C2410_PA_RTC
@@ -101,6 +100,8 @@
#define S3C24XX_PA_SDI S3C2410_PA_SDI
#define S3C24XX_PA_NAND S3C2410_PA_NAND
+#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
+#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index d061fea01900..6d6995afeb43 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -52,6 +52,7 @@
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
+#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
#endif
&s3c_device_adc,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_usbgadget,
@@ -233,6 +234,7 @@ static void __init amlm5900_init(void)
#ifdef CONFIG_FB_S3C2410
s3c24xx_fb_set_platdata(&amlm5900_fb_info);
#endif
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
}
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index c04c24444e0d..01bd76725b92 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -406,7 +406,7 @@ static struct platform_device bast_sio = {
* standard 100KHz i2c bus frequency
*/
-static struct s3c2410_platform_i2c bast_i2c_info = {
+static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
.flags = 0,
.slave_addr = 0x10,
.bus_freq = 100*1000,
@@ -553,7 +553,7 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
&bast_device_dm9k,
@@ -588,7 +588,8 @@ static void __init bast_map_io(void)
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
s3c_device_nand.dev.platform_data = &bast_nand_info;
- s3c_device_i2c.dev.platform_data = &bast_i2c_info;
+
+ s3c_i2c0_set_platdata(&bast_i2c_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 836508b829bb..821a1668c3ac 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -39,6 +39,7 @@
#include <mach/h1940-latch.h>
#include <mach/fb.h>
#include <plat/udc.h>
+#include <plat/iic.h>
#include <plat/clock.h>
#include <plat/devs.h>
@@ -184,7 +185,7 @@ static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
&s3c_device_leds,
@@ -216,6 +217,7 @@ static void __init h1940_init(void)
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+ s3c_i2c0_set_platdata(NULL);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 7a7c45d28fe7..1269e59d2940 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -320,7 +320,7 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
static struct platform_device *n30_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usb,
&s3c_device_usbgadget,
@@ -332,7 +332,7 @@ static struct platform_device *n30_devices[] __initdata = {
static struct platform_device *n35_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
&n35_button_device,
@@ -501,7 +501,7 @@ static void __init n30_init_irq(void)
static void __init n30_init(void)
{
s3c24xx_fb_set_platdata(&n30_fb_info);
- s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
+ s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
s3c24xx_udc_set_platdata(&n30_udc_cfg);
/* Turn off suspend on both USB ports, and switch the
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index d8255cf87e44..f6c7261a4a12 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -35,6 +35,7 @@
#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/devs.h>
+#include <plat/iic.h>
#include <plat/cpu.h>
static struct map_desc otom11_iodesc[] __initdata = {
@@ -94,7 +95,7 @@ static struct platform_device *otom11_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_rtc,
&otom_device_nor,
@@ -109,6 +110,7 @@ static void __init otom11_map_io(void)
static void __init otom11_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
}
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ef868472f6a4..9678a53ceeb1 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -54,6 +54,7 @@
#include <plat/udc.h>
#include <mach/spi.h>
#include <mach/spi-gpio.h>
+#include <plat/iic.h>
#include <plat/common-smdk.h>
#include <plat/devs.h>
@@ -247,7 +248,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_sdi,
&s3c_device_usbgadget,
@@ -349,6 +350,7 @@ static void __init qt2410_machine_init(void)
s3c2410_gpio_setpin(S3C2410_GPB0, 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+ s3c_i2c0_set_platdata(NULL);
s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 152527bb2872..c49126ccb1d5 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -47,6 +47,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
+#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
};
@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void)
static void __init smdk2410_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
smdk_machine_init();
}
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 309dcf4c870a..8fdb0430bd48 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -45,6 +45,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
+#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
static struct platform_device *tct_hammer_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_usbgadget,
@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(void)
static void __init tct_hammer_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
}
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 941353af16dc..61a1ea9c5c5c 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -47,6 +47,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/iic.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
@@ -334,7 +335,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_adc,
&serial_device,
&vr1000_dm9k0,
@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void)
static void __init vr1000_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
i2c_register_board_info(0, vr1000_i2c_devs,
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 5e758cf8bf82..2cd4044797cf 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -53,6 +53,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/udc.h>
+#include <plat/iic.h>
static struct map_desc jive_iodesc[] __initdata = {
};
@@ -452,14 +453,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = {
/* I2C bus and device configuration. */
-static struct s3c2410_platform_i2c jive_i2c_cfg = {
+static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
.max_freq = 80 * 1000,
.bus_freq = 50 * 1000,
.flags = S3C_IICFLG_FILTER,
.sda_delay = 2,
};
-static struct i2c_board_info jive_i2c_devs[] = {
+static struct i2c_board_info jive_i2c_devs[] __initdata = {
[0] = {
I2C_BOARD_INFO("lis302dl", 0x1c),
.irq = IRQ_EINT14,
@@ -472,7 +473,7 @@ static struct platform_device *jive_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_lcd,
&jive_device_lcdspi,
&jive_device_wm8750,
@@ -665,7 +666,7 @@ static void __init jive_machine_init(void)
spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
- s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
+ s3c_i2c0_set_platdata(&jive_i2c_cfg);
i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
pm_power_off = jive_power_off;
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 8fd17b8d5679..eba66aa6bd20 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -38,6 +38,7 @@
#include <mach/idle.h>
#include <plat/udc.h>
+#include <plat/iic.h>
#include <mach/fb.h>
#include <plat/s3c2410.h>
@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_usb,
//&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
};
@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init(void)
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
smdk_machine_init();
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index da32a6cb17ae..11e8ad49fc7b 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -39,6 +39,7 @@
#include <mach/idle.h>
#include <mach/fb.h>
+#include <plat/iic.h>
#include <plat/nand.h>
#include <plat/s3c2410.h>
@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstms_nand_info = {
static struct platform_device *vstms_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
@@ -151,6 +152,7 @@ static void __init vstms_map_io(void)
static void __init vstms_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
}
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index f151f8939929..b05d56e230a1 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -40,6 +40,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <plat/nand.h>
+#include <plat/iic.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -409,7 +410,7 @@ static struct platform_device *anubis_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_adc,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
&anubis_device_ide0,
@@ -473,6 +474,7 @@ static void __init anubis_map_io(void)
static void __init anubis_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
i2c_register_board_info(0, anubis_i2c_devs,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 4539b1d95877..0a6d0a5d961b 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -37,6 +37,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <plat/nand.h>
+#include <plat/iic.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -205,7 +206,7 @@ static struct platform_device *at2440evb_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_adc,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
&s3c_device_sdi,
@@ -227,6 +228,8 @@ static void __init at2440evb_map_io(void)
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ s3c_i2c0_set_platdata(NULL);
+
platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
}
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index a546307fd53d..7aeaa972d7f5 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -37,6 +37,7 @@
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
+#include <plat/iic.h>
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_camif,
@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void)
static void __init nexcoder_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
};
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 884a3c7ae75f..41a00f57e5da 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -38,6 +38,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <plat/nand.h>
+#include <plat/iic.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
/* Standard Osiris devices */
static struct platform_device *osiris_devices[] __initdata = {
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_wdt,
&s3c_device_nand,
&osiris_pcmcia,
@@ -398,6 +399,8 @@ static void __init osiris_init(void)
sysdev_class_register(&osiris_pm_sysclass);
sysdev_register(&osiris_pm_sysdev);
+ s3c_i2c0_set_platdata(NULL);
+
i2c_register_board_info(0, osiris_i2c_devs,
ARRAY_SIZE(osiris_i2c_devs));
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index fbd081de592f..12d378f84ad2 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -179,7 +179,7 @@ static struct platform_device *rx3715_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_nand,
};
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index fefeaaa4155f..db6eafbd4d90 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -37,6 +37,7 @@
#include <mach/idle.h>
#include <mach/fb.h>
+#include <plat/iic.h>
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
- &s3c_device_i2c,
+ &s3c_device_i2c0,
&s3c_device_iis,
};
@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void)
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
smdk_machine_init();
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 14252f573754..212141baebec 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -24,6 +24,7 @@ config MACH_SMDK2443
bool "SMDK2443"
select CPU_S3C2443
select MACH_SMDK
+ select S3C_DEV_HSMMC
help
Say Y here if you are using an SMDK2443
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index a7fe65f3dcc1..039a46243105 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -37,6 +37,7 @@
#include <mach/idle.h>
#include <mach/fb.h>
+#include <plat/iic.h>
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
static struct platform_device *smdk2443_devices[] __initdata = {
&s3c_device_wdt,
- &s3c_device_i2c,
- &s3c_device_hsmmc,
+ &s3c_device_i2c0,
+ &s3c_device_hsmmc0,
};
static void __init smdk2443_map_io(void)
@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void)
static void __init smdk2443_machine_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
smdk_machine_init();
}
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 6667355a47a1..a01132717e34 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -71,7 +71,6 @@
#define S3C24XX_PA_TIMER S3C24A0_PA_TIMER
#define S3C24XX_PA_USBDEV S3C24A0_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C24A0_PA_WATCHDOG
-#define S3C24XX_PA_IIC S3C24A0_PA_IIC
#define S3C24XX_PA_IIS S3C24A0_PA_IIS
#define S3C24XX_PA_GPIO S3C24A0_PA_GPIO
#define S3C24XX_PA_RTC S3C24A0_PA_RTC
@@ -81,5 +80,6 @@
#define S3C24XX_PA_NAND S3C24A0_PA_NAND
#define S3C_PA_UART S3C24A0_PA_UART
+#define S3C_PA_IIC S3C24A0_PA_IIC
#endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
new file mode 100644
index 000000000000..d89aae68b0a5
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c6400/include/mach/gpio.h
index 8b4254a23d9a..e8e35e8fe731 100644
--- a/arch/arm/mach-s3c6400/include/mach/gpio.h
+++ b/arch/arm/mach-s3c6400/include/mach/gpio.h
@@ -17,6 +17,80 @@
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
-#define ARCH_NR_GPIOS 188
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR (8)
+#define S3C64XX_GPIO_B_NR (7)
+#define S3C64XX_GPIO_C_NR (8)
+#define S3C64XX_GPIO_D_NR (5)
+#define S3C64XX_GPIO_E_NR (5)
+#define S3C64XX_GPIO_F_NR (16)
+#define S3C64XX_GPIO_G_NR (7)
+#define S3C64XX_GPIO_H_NR (10)
+#define S3C64XX_GPIO_I_NR (16)
+#define S3C64XX_GPIO_J_NR (12)
+#define S3C64XX_GPIO_K_NR (16)
+#define S3C64XX_GPIO_L_NR (15)
+#define S3C64XX_GPIO_M_NR (6)
+#define S3C64XX_GPIO_N_NR (16)
+#define S3C64XX_GPIO_O_NR (16)
+#define S3C64XX_GPIO_P_NR (15)
+#define S3C64XX_GPIO_Q_NR (9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+ S3C64XX_GPIO_A_START = 0,
+ S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+ S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+ S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+ S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+ S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+ S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+ S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+ S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+ S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+ S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+ S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+ S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+ S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+ S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+ S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+ S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 618f09d637b2..cff27d813fc6 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -17,6 +17,12 @@
#include <plat/map-base.h>
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2)
+
#define S3C_PA_UART (0x7F005000)
#define S3C_PA_UART0 (S3C_PA_UART + 0x00)
#define S3C_PA_UART1 (S3C_PA_UART + 0x400)
@@ -32,8 +38,11 @@
#define S3C_VA_UART2 S3C_VA_UARTx(2)
#define S3C_VA_UART3 S3C_VA_UARTx(3)
+#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_TIMER (0x7F006000)
+#define S3C64XX_PA_IIC0 (0x7F004000)
+#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000)
@@ -49,5 +58,11 @@
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC S3C64XX_PA_IIC0
+#define S3C_PA_IIC1 S3C64XX_PA_IIC1
+#define S3C_PA_FB S3C64XX_PA_FB
#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
new file mode 100644
index 000000000000..47019795ce06
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
@@ -0,0 +1,259 @@
+/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN (1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0 (0x10)
+#define VIDTCON1 (0x14)
+#define VIDTCON2 (0x18)
+
+/* Window position controls */
+
+#define WINCON(_win) (0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win) (0x40 + ((_win) * 16))
+#define VIDOSD_B(_win) (0x44 + ((_win) * 16))
+#define VIDOSD_C(_win) (0x48 + ((_win) * 16))
+#define VIDOSD_D(_win) (0x4C + ((_win) * 16))
+
+/* Video buffer addresses */
+
+#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8))
+#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8))
+#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8))
+#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8))
+#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4))
+
+#define VIDINTCON0 (0x130)
+
+#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK (0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT (26)
+#define WINCONx_CSCWIDTH_WIDE (0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW (0x3 << 26)
+
+#define WINCONx_ENLOCAL (1 << 22)
+#define WINCONx_BUFSTATUS (1 << 21)
+#define WINCONx_BUFSEL (1 << 20)
+#define WINCONx_BUFAUTOEN (1 << 19)
+#define WINCONx_YCbCr (1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF (1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF (1 << 23)
+#define WINCON2_BLD_PIX (1 << 6)
+
+#define WINCON2_ALPHA_SEL (1 << 1)
+#define WINCON2_BPPMODE_MASK (0xf << 2)
+#define WINCON2_BPPMODE_SHIFT (2)
+#define WINCON2_BPPMODE_1BPP (0x0 << 2)
+#define WINCON2_BPPMODE_2BPP (0x1 << 2)
+#define WINCON2_BPPMODE_4BPP (0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888 (0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2)
+
+#define WINCON3_BLD_PIX (1 << 6)
+
+#define WINCON3_ALPHA_SEL (1 << 1)
+#define WINCON3_BPPMODE_MASK (0xf << 2)
+#define WINCON3_BPPMODE_SHIFT (2)
+#define WINCON3_BPPMODE_1BPP (0x0 << 2)
+#define WINCON3_BPPMODE_2BPP (0x1 << 2)
+#define WINCON3_BPPMODE_4BPP (0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888 (0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5)
+
+#define DITHMODE (0x170)
+#define WINxMAP(_win) (0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK (0x3 << 5)
+#define DITHMODE_R_POS_SHIFT (5)
+#define DITHMODE_R_POS_8BIT (0x0 << 5)
+#define DITHMODE_R_POS_6BIT (0x1 << 5)
+#define DITHMODE_R_POS_5BIT (0x2 << 5)
+
+#define DITHMODE_G_POS_MASK (0x3 << 3)
+#define DITHMODE_G_POS_SHIFT (3)
+#define DITHMODE_G_POS_8BIT (0x0 << 3)
+#define DITHMODE_G_POS_6BIT (0x1 << 3)
+#define DITHMODE_G_POS_5BIT (0x2 << 3)
+
+#define DITHMODE_B_POS_MASK (0x3 << 1)
+#define DITHMODE_B_POS_SHIFT (1)
+#define DITHMODE_B_POS_8BIT (0x0 << 1)
+#define DITHMODE_B_POS_6BIT (0x1 << 1)
+#define DITHMODE_B_POS_5BIT (0x2 << 1)
+
+#define DITHMODE_DITH_EN (1 << 0)
+
+#define WPALCON (0x1A0)
+
+#define WPALCON_W4PAL_16BPP_A555 (1 << 8)
+#define WPALCON_W3PAL_16BPP_A555 (1 << 7)
+#define WPALCON_W2PAL_16BPP_A555 (1 << 6)
+
+/* Palette registers */
+
+#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2))
+#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2))
+#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2))
+#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4))
+#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4))
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+ if (win < 2)
+ return 256;
+ if (win < 4)
+ return 16;
+ if (win == 4)
+ return 4;
+
+ BUG(); /* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+ /* all windows can do 1/2 bpp */
+
+ if ((bpp == 25 || bpp == 19) && win == 0)
+ return 0; /* win 0 does not have 19 or 25bpp modes */
+
+ if (bpp == 4 && win == 4)
+ return 0;
+
+ if (bpp == 8 && (win >= 3))
+ return 0; /* win 3/4 cannot do 8bpp in any mode */
+
+ return 1;
+}
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+ switch (window) {
+ case 0: return WIN0_PAL(reg);
+ case 1: return WIN1_PAL(reg);
+ case 2: return WIN2_PAL(reg);
+ case 3: return WIN3_PAL(reg);
+ case 4: return WIN4_PAL(reg);
+ }
+
+ BUG();
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+ return window > 1;
+}
+
+struct s3c_fb_palette {
+ struct fb_bitfield r;
+ struct fb_bitfield g;
+ struct fb_bitfield b;
+ struct fb_bitfield a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+ struct s3c_fb_palette *palette)
+{
+ if (window < 2) {
+ /* Windows 0/1 are 8/8/8 or A/8/8/8 */
+ palette->r.offset = 16;
+ palette->r.length = 8;
+ palette->g.offset = 8;
+ palette->g.length = 8;
+ palette->b.offset = 0;
+ palette->b.length = 8;
+ } else {
+ /* currently we assume RGB 5/6/5 */
+ palette->r.offset = 11;
+ palette->r.length = 5;
+ palette->g.offset = 5;
+ palette->g.length = 6;
+ palette->b.offset = 0;
+ palette->b.length = 5;
+ }
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value Win0 Win1 Win2 Win3 Win 4
+ * 0000 1(P) 1(P) 1(P) 1(P) 1(P)
+ * 0001 2(P) 2(P) 2(P) 2(P) 2(P)
+ * 0010 4(P) 4(P) 4(P) 4(P) -none-
+ * 0011 8(P) 8(P) -none- -none- -none-
+ * 0100 -none- 8(A232) 8(A232) -none- -none-
+ * 0101 16(565) 16(565) 16(565) 16(565) 16(565)
+ * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555)
+ * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555)
+ * 1000 18(666) 18(666) 18(666) 18(666) 18(666)
+ * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665)
+ * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666)
+ * 1011 24(888) 24(888) 24(888) 24(888) 24(888)
+ * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887)
+ * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888)
+ * 1110 -none- -none- -none- -none- -none-
+ * 1111 -none- -none- -none- -none- -none-
+*/
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 75b1244cf8ab..1d5010070027 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -14,8 +14,49 @@ config CPU_S3C6410
help
Enable S3C6410 CPU support
+config S3C6410_SETUP_SDHCI
+ bool
+ help
+ Internal helper functions for S3C6410 based SDHCI systems
+
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_I2C1
+ select S3C_DEV_FB
+ select S3C6410_SETUP_SDHCI
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_FB_24BPP
help
Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+ prompt "SMDK6410 MMC/SD slot setup"
+ depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+ bool "Use channel 0 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON7 (channel 0) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+ bool "Use channel 1 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON6 (channel 1) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+endchoice
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 4a20a009990a..2cd4f189036b 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -14,6 +14,10 @@ obj- :=
obj-$(CONFIG_CPU_S3C6410) += cpu.o
+# Helper and device support
+
+obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
+
# machine support
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 975cf88f0e84..6a73ca6b7a3a 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -35,6 +35,8 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
#include <plat/s3c6400.h>
#include <plat/s3c6410.h>
@@ -51,6 +53,14 @@ static struct map_desc s3c6410_iodesc[] __initdata = {
void __init s3c6410_map_io(void)
{
iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
+
+ /* initialise device information early */
+ s3c6410_default_sdhci0();
+ s3c6410_default_sdhci1();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
}
void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 9213a8ba283b..3c4d47145c83 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -20,18 +20,27 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include <mach/regs-fb.h>
#include <mach/map.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
#include <plat/s3c6410.h>
#include <plat/clock.h>
@@ -59,9 +68,89 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
},
};
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+ gpio_direction_output(S3C64XX_GPF(13), 1);
+ gpio_direction_output(S3C64XX_GPF(15), 1);
+
+ /* fire nRESET on power up */
+ gpio_direction_output(S3C64XX_GPN(5), 0);
+ msleep(10);
+ gpio_direction_output(S3C64XX_GPN(5), 1);
+ msleep(1);
+ } else {
+ gpio_direction_output(S3C64XX_GPF(15), 0);
+ gpio_direction_output(S3C64XX_GPF(13), 0);
+ }
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+ .set_power = smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &smdk6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+ &s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+ &s3c_device_hsmmc1,
+#endif
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &smdk6410_lcd_powerdev,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+ { I2C_BOARD_INFO("WM8580", 0X1b), },
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
};
static void __init smdk6410_map_io(void)
@@ -73,6 +162,13 @@ static void __init smdk6410_map_io(void)
static void __init smdk6410_machine_init(void)
{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
new file mode 100644
index 000000000000..0b5788bd5985
--- /dev/null
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -0,0 +1,102 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6410_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc",
+ [1] = "hsmmc",
+ [2] = "mmc_bus",
+ /* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S3C64XX_GPG(2 + width);
+
+ /* Set all the necessary GPG pins to special-function 0 */
+ for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ /* don't need to alter anything acording to card-type */
+
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
+void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S3C64XX_GPH(2 + width);
+
+ /* Set all the necessary GPG pins to special-function 0 */
+ for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index adb9060ec910..def0bb457ca3 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -110,3 +110,73 @@ config S3C_LOWLEVEL_UART_PORT
such as the `Uncompressing...` at start time. The value of
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
+
+# options for gpiolib support
+
+config S3C_GPIO_SPACE
+ int "Space between gpio banks"
+ default 0
+ help
+ Add a number of spare GPIO entries between each bank for debugging
+ purposes. This allows any problems where an counter overflows from
+ one bank to another to be caught, at the expense of using a little
+ more memory.
+
+config S3C_GPIO_TRACK
+ bool
+ help
+ Internal configuration option to enable the s3c specific gpio
+ chip tracking if the platform requires it.
+
+config S3C_GPIO_PULL_UPDOWN
+ bool
+ help
+ Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_DOWN
+ bool
+ help
+ Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_UP
+ bool
+ help
+ Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_CFG_S3C24XX
+ bool
+ help
+ Internal configuration to enable S3C24XX style GPIO configuration
+ functions.
+
+config S3C_GPIO_CFG_S3C64XX
+ bool
+ help
+ Internal configuration to enable S3C64XX style GPIO configuration
+ functions.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+ bool
+ depends on PLAT_S3C
+ help
+ Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+ bool
+ depends on PLAT_S3C
+ help
+ Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_I2C1
+ bool
+ depends on PLAT_S3C
+ help
+ Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_FB
+ bool
+ depends on PLAT_S3C
+ help
+ Compile in platform device definition for framebuffer
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index a2fe3c77564e..39195f972d5e 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -14,4 +14,14 @@ obj- :=
obj-y += init.o
obj-y += time.o
obj-y += clock.o
-obj-y += pwm-clock.o \ No newline at end of file
+obj-y += pwm-clock.o
+obj-y += gpio.o
+obj-y += gpio-config.o
+
+# devices
+
+obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
+obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
+obj-y += dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-s3c/dev-fb.c
new file mode 100644
index 000000000000..0454b8ec02e2
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-fb.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/plat-s3c/dev-fb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for framebuffer device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+
+#include <plat/fb.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_fb_resource[] = {
+ [0] = {
+ .start = S3C_PA_FB,
+ .end = S3C_PA_FB + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_LCD_VSYNC,
+ .end = IRQ_LCD_VSYNC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_LCD_FIFO,
+ .end = IRQ_LCD_FIFO,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = IRQ_LCD_SYSTEM,
+ .end = IRQ_LCD_SYSTEM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_fb = {
+ .name = "s3c-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_fb_resource),
+ .resource = s3c_fb_resource,
+ .dev.dma_mask = &s3c_device_fb.dev.coherent_dma_mask,
+ .dev.coherent_dma_mask = 0xffffffffUL,
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+ struct s3c_fb_platdata *npd;
+
+ if (!pd) {
+ printk(KERN_ERR "%s: no platform data\n", __func__);
+ return;
+ }
+
+ npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_fb.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-s3c/dev-hsmmc.c
new file mode 100644
index 000000000000..4c05b39810e2
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for hsmmc devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_SZ_HSMMC (0x1000)
+
+static struct resource s3c_hsmmc_resource[] = {
+ [0] = {
+ .start = S3C_PA_HSMMC0,
+ .end = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_HSMMC0,
+ .end = IRQ_HSMMC0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc0 = {
+ .name = "s3c-sdhci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc_resource),
+ .resource = s3c_hsmmc_resource,
+ .dev = {
+ .dma_mask = &s3c_device_hsmmc_dmamask,
+ .coherent_dma_mask = 0xffffffffUL,
+ .platform_data = &s3c_hsmmc0_def_platdata,
+ },
+};
+
+void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
+
+ set->max_width = pd->max_width;
+
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-s3c/dev-hsmmc1.c
new file mode 100644
index 000000000000..e49bc4cd0ee6
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc1.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc1.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for hsmmc device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_SZ_HSMMC (0x1000)
+
+static struct resource s3c_hsmmc1_resource[] = {
+ [0] = {
+ .start = S3C_PA_HSMMC1,
+ .end = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_HSMMC1,
+ .end = IRQ_HSMMC1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc1 = {
+ .name = "s3c-sdhci",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource),
+ .resource = s3c_hsmmc1_resource,
+ .dev = {
+ .dma_mask = &s3c_device_hsmmc1_dmamask,
+ .coherent_dma_mask = 0xffffffffUL,
+ .platform_data = &s3c_hsmmc1_def_platdata,
+ },
+};
+
+void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
+
+ set->max_width = pd->max_width;
+
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
new file mode 100644
index 000000000000..2c0128c77c6e
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-s3c/dev-i2c0.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC,
+ .end = S3C_PA_IIC + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC,
+ .end = IRQ_IIC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c0 = {
+ .name = "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+ .id = 0,
+#else
+ .id = -1,
+#endif
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
+ .flags = 0,
+ .slave_addr = 0x10,
+ .bus_freq = 100*1000,
+ .max_freq = 400*1000,
+ .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data0;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+
+ s3c_device_i2c0.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
new file mode 100644
index 000000000000..9658fb0aec95
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-i2c1.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC1,
+ .end = S3C_PA_IIC1 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC1,
+ .end = IRQ_IIC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c1 = {
+ .name = "s3c2410-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
+ .flags = 0,
+ .bus_num = 1,
+ .slave_addr = 0x10,
+ .bus_freq = 100*1000,
+ .max_freq = 400*1000,
+ .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data1;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+
+ s3c_device_i2c1.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
new file mode 100644
index 000000000000..7642b975a998
--- /dev/null
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -0,0 +1,163 @@
+/* linux/arch/arm/plat-s3c/gpio-config.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO configuration core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ int ret;
+
+ if (!chip)
+ return -EINVAL;
+
+ offset = pin - chip->chip.base;
+
+ local_irq_save(flags);
+ ret = s3c_gpio_do_setcfg(chip, offset, config);
+ local_irq_restore(flags);
+
+ return ret;
+}
+
+int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset, ret;
+
+ if (!chip)
+ return -EINVAL;
+
+ offset = pin - chip->chip.base;
+
+ local_irq_save(flags);
+ ret = s3c_gpio_do_setpull(chip, offset, pull);
+ local_irq_restore(flags);
+
+ return ret;
+}
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
+int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = off;
+ u32 con;
+
+ if (s3c_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+
+ /* Map output to 0, and SFN2 to 1 */
+ cfg -= 1;
+ if (cfg > 1)
+ return -EINVAL;
+
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0x1 << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = off * 2;
+ u32 con;
+
+ if (s3c_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ if (cfg > 3)
+ return -EINVAL;
+
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0x3 << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
+int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift = (off & 7) * 4;
+ u32 con;
+
+ if (off < 8 && chip->chip.ngpio >= 8)
+ reg -= 4;
+
+ if (s3c_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0xf << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
+int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ void __iomem *reg = chip->base + 0x08;
+ int shift = off * 2;
+ u32 pup;
+
+ pup = __raw_readl(reg);
+ pup &= ~(3 << shift);
+ pup |= pull << shift;
+ __raw_writel(pup, reg);
+
+ return 0;
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ void __iomem *reg = chip->base + 0x08;
+ int shift = off * 2;
+ u32 pup = __raw_readl(reg);
+
+ pup >>= shift;
+ pup &= 0x3;
+ return (__force s3c_gpio_pull_t)pup;
+}
+#endif
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
new file mode 100644
index 000000000000..d71dd6d9ce5c
--- /dev/null
+++ b/arch/arm/plat-s3c/gpio.c
@@ -0,0 +1,147 @@
+/* linux/arch/arm/plat-s3c/gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-core.h>
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
+{
+ unsigned int gpn;
+ int i;
+
+ gpn = chip->chip.base;
+ for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+ BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+ s3c_gpios[gpn] = chip;
+ }
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/* Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ * gpio n: 2 bits starting at (2*n)
+ * 00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+*/
+
+static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+
+ __raw_writel(con, base + 0x00);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int s3c_gpiolib_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+ unsigned long con;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~(3 << (offset * 2));
+ con |= 1 << (offset * 2);
+
+ __raw_writel(con, base + 0x00);
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+static void s3c_gpiolib_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long flags;
+ unsigned long dat;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offset);
+ if (value)
+ dat |= 1 << offset;
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+}
+
+static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ unsigned long val;
+
+ val = __raw_readl(ourchip->base + 0x04);
+ val >>= offset;
+ val &= 1;
+
+ return val;
+}
+
+__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
+{
+ struct gpio_chip *gc = &chip->chip;
+ int ret;
+
+ BUG_ON(!chip->base);
+ BUG_ON(!gc->label);
+ BUG_ON(!gc->ngpio);
+
+ if (!gc->direction_input)
+ gc->direction_input = s3c_gpiolib_input;
+ if (!gc->direction_output)
+ gc->direction_output = s3c_gpiolib_output;
+ if (!gc->set)
+ gc->set = s3c_gpiolib_set;
+ if (!gc->get)
+ gc->get = s3c_gpiolib_get;
+
+ /* gpiochip_add() prints own failure message on error. */
+ ret = gpiochip_add(gc);
+ if (ret >= 0)
+ s3c_gpiolib_track(chip);
+}
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index a689c7c5ac23..6b1b5231511c 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -24,15 +24,19 @@ extern struct platform_device *s3c24xx_uart_src[];
extern struct platform_device s3c_device_timer[];
+extern struct platform_device s3c_device_fb;
extern struct platform_device s3c_device_usb;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_iis;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_hsmmc;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
new file mode 100644
index 000000000000..214ff561b0dd
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/fb.h
@@ -0,0 +1,73 @@
+/* linux/arch/arm/plat-s3c/include/plat/fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - FB platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_FB_H
+#define __PLAT_S3C_FB_H __FILE__
+
+/**
+ * struct s3c_fb_pd_win - per window setup data
+ * @win_mode: The display parameters to initialise (not for window 0)
+ * @virtual_x: The virtual X size.
+ * @virtual_y: The virtual Y size.
+ */
+struct s3c_fb_pd_win {
+ struct fb_videomode win_mode;
+
+ unsigned short default_bpp;
+ unsigned short max_bpp;
+ unsigned short virtual_x;
+ unsigned short virtual_y;
+};
+
+/**
+ * struct s3c_fb_platdata - S3C driver platform specific information
+ * @setup_gpio: Setup the external GPIO pins to the right state to transfer
+ * the data from the display system to the connected display
+ * device.
+ * @vidcon0: The base vidcon0 values to control the panel data format.
+ * @vidcon1: The base vidcon1 values to control the panel data output.
+ * @win: The setup data for each hardware window, or NULL for unused.
+ * @display_mode: The LCD output display mode.
+ *
+ * The platform data supplies the video driver with all the information
+ * it requires to work with the display(s) attached to the machine. It
+ * controls the initial mode, the number of display windows (0 is always
+ * the base framebuffer) that are initialised etc.
+ *
+ */
+struct s3c_fb_platdata {
+ void (*setup_gpio)(void);
+
+ struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN];
+
+ u32 vidcon0;
+ u32 vidcon1;
+};
+
+/**
+ * s3c_fb_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ * so the machine data can mark the data __initdata so that any unused
+ * machines will end up dumping their data at runtime.
+ */
+extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s3c64xx_fb_gpio_setup_24bpp(void);
+
+#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
new file mode 100644
index 000000000000..652e2bbdaa20
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
@@ -0,0 +1,176 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int config)
+{
+ return (chip->config->set_config)(chip, off, config);
+}
+
+static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return (chip->config->set_pull)(chip, off, pull);
+}
+
+/**
+ * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ * 00 = input
+ * 01 = output
+ * 1x = special function
+*/
+extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+*/
+extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a seperate set of functions for
+ * each case.
+*/
+extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg);
+
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440,S3C24A0 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ * 00 = No pull resistor connected
+ * 01 = Pull-up resistor connected
+ * 10 = Pull-down resistor connected
+ */
+extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull);
+
+
+/**
+ * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+ unsigned int off);
+
+/**
+ * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ * 00 = Pull-up resistor connected
+ * 10 = Pull-down resistor connected
+ * x1 = No pull up resistor
+ */
+extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+ unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-s3c/include/plat/gpio-cfg.h
new file mode 100644
index 000000000000..29cd6a86cade
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg.h
@@ -0,0 +1,110 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+/* Note, this interface is being added to the s3c64xx arch first and will
+ * be added to the s3c24xx systems later.
+ */
+
+#ifndef __PLAT_GPIO_CFG_H
+#define __PLAT_GPIO_CFG_H __FILE__
+
+typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+
+/* forward declaration if gpio-core.h hasn't been included */
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_cfg GPIO configuration
+ * @cfg_eint: Configuration setting when used for external interrupt source
+ * @get_pull: Read the current pull configuration for the GPIO
+ * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_config: Set the current configuration for the GPIO
+ * @get_config: Read the current configuration for the GPIO
+ *
+ * Each chip can have more than one type of GPIO bank available and some
+ * have different capabilites even when they have the same control register
+ * layouts. Provide an point to vector control routine and provide any
+ * per-bank configuration information that other systems such as the
+ * external interrupt code will need.
+ */
+struct s3c_gpio_cfg {
+ unsigned int cfg_eint;
+
+ s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
+ int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
+ s3c_gpio_pull_t pull);
+
+ unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
+ int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+ unsigned config);
+};
+
+#define S3C_GPIO_SPECIAL_MARK (0xfffffff0)
+#define S3C_GPIO_SPECIAL(x) (S3C_GPIO_SPECIAL_MARK | (x))
+
+/* Defines for generic pin configurations */
+#define S3C_GPIO_INPUT (S3C_GPIO_SPECIAL(0))
+#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1))
+#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x))
+
+#define s3c_gpio_is_cfg_special(_cfg) \
+ (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
+
+/**
+ * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
+ * @pin pin The pin number to configure.
+ * @pin to The configuration for the pin's function.
+ *
+ * Configure which function is actually connected to the external
+ * pin, such as an gpio input, output or some form of special function
+ * connected to an internal peripheral block.
+ */
+extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
+
+/* Define values for the pull-{up,down} available for each gpio pin.
+ *
+ * These values control the state of the weak pull-{up,down} resistors
+ * available on most pins on the S3C series. Not all chips support both
+ * up or down settings, and it may be dependant on the chip that is being
+ * used to whether the particular mode is available.
+ */
+#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02)
+
+/**
+ * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
+ * @pin: The pin number to configure the pull resistor.
+ * @pull: The configuration for the pull resistor.
+ *
+ * This function sets the state of the pull-{up,down} resistor for the
+ * specified pin. It will return 0 if successfull, or a negative error
+ * code if the pin cannot support the requested pull setting.
+*/
+extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the pull resistor value for the specified pin.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+
+#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
new file mode 100644
index 000000000000..2fc60a580ac8
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+struct s3c_gpio_cfg;
+
+/**
+ * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @config: special function and pull-resistor control information.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ */
+struct s3c_gpio_chip {
+ struct gpio_chip chip;
+ struct s3c_gpio_cfg *config;
+ void __iomem *base;
+};
+
+static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+{
+ return container_of(gpc, struct s3c_gpio_chip, chip);
+}
+
+/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
+
+/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own s3c_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+{
+ return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
+}
+#else
+/* machine specific code should provide s3c_gpiolib_getchip */
+
+static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-s3c/include/plat/iic-core.h
new file mode 100644
index 000000000000..36397ca20962
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/iic-core.h
@@ -0,0 +1,35 @@
+/* arch/arm/mach-s3c2410/include/mach/iic-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_CORE_H
+#define __ASM_ARCH_IIC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_i2c0_setname(char *name)
+{
+ /* currently this device is always compiled in */
+ s3c_device_i2c0.name = name;
+}
+
+static inline void s3c_i2c1_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C1
+ s3c_device_i2c1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 5106acaa1d0e..dc1dfcb9bc6c 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -28,6 +28,30 @@ struct s3c2410_platform_i2c {
unsigned long max_freq; /* max frequency for the bus */
unsigned long min_freq; /* min frequency for the bus */
unsigned int sda_delay; /* pclks (s3c2440 only) */
+
+ void (*cfg_gpio)(struct platform_device *dev);
};
+/**
+ * s3c_i2c0_set_platdata - set platform data for i2c0 device
+ * @i2c: The platform data to set, or NULL for default data.
+ *
+ * Register the given platform data for use with the i2c0 device. This
+ * call copies the platform data, so the caller can use __initdata for
+ * their copy.
+ *
+ * This call will set cfg_gpio if is null to the default platform
+ * implementation.
+ *
+ * Any user of s3c_device_i2c0 should call this, even if it is with
+ * NULL to ensure that the device is given the default platform data
+ * as the driver will no longer carry defaults.
+ */
+extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+
+/* defined by architecture to configure gpio */
+extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+
#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-s3c/include/plat/regs-fb.h
new file mode 100644
index 000000000000..e9ee599d430e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-fb.h
@@ -0,0 +1,366 @@
+/* arch/arm/plat-s3c/include/plat/regs-fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards into the S3C2416, S3C2450 and the
+ * S3C64XX series such as the S3C6400 and S3C6410.
+ *
+ * The file does not contain the cpu specific items which are based on
+ * whichever architecture is selected, it only contains the core of the
+ * register set. See <mach/regs-fb.h> to get the specifics.
+ *
+ * Note, we changed to using regs-fb.h as it avoids any clashes with
+ * the original regs-lcd.h so out of the way of regs-lcd.h as well as
+ * indicating the newer block is much more than just an LCD interface.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Please do not include this file directly, use <mach/regs-fb.h> to
+ * ensure all the localised SoC support is included as necessary.
+*/
+
+/* VIDCON0 */
+
+#define VIDCON0 (0x00)
+#define VIDCON0_INTERLACE (1 << 29)
+#define VIDCON0_VIDOUT_MASK (0x3 << 26)
+#define VIDCON0_VIDOUT_SHIFT (26)
+#define VIDCON0_VIDOUT_RGB (0x0 << 26)
+#define VIDCON0_VIDOUT_TV (0x1 << 26)
+#define VIDCON0_VIDOUT_I80_LDI0 (0x2 << 26)
+#define VIDCON0_VIDOUT_I80_LDI1 (0x3 << 26)
+
+#define VIDCON0_L1_DATA_MASK (0x7 << 23)
+#define VIDCON0_L1_DATA_SHIFT (23)
+#define VIDCON0_L1_DATA_16BPP (0x0 << 23)
+#define VIDCON0_L1_DATA_18BPP16 (0x1 << 23)
+#define VIDCON0_L1_DATA_18BPP9 (0x2 << 23)
+#define VIDCON0_L1_DATA_24BPP (0x3 << 23)
+#define VIDCON0_L1_DATA_18BPP (0x4 << 23)
+#define VIDCON0_L1_DATA_16BPP8 (0x5 << 23)
+
+#define VIDCON0_L0_DATA_MASK (0x7 << 20)
+#define VIDCON0_L0_DATA_SHIFT (20)
+#define VIDCON0_L0_DATA_16BPP (0x0 << 20)
+#define VIDCON0_L0_DATA_18BPP16 (0x1 << 20)
+#define VIDCON0_L0_DATA_18BPP9 (0x2 << 20)
+#define VIDCON0_L0_DATA_24BPP (0x3 << 20)
+#define VIDCON0_L0_DATA_18BPP (0x4 << 20)
+#define VIDCON0_L0_DATA_16BPP8 (0x5 << 20)
+
+#define VIDCON0_PNRMODE_MASK (0x3 << 17)
+#define VIDCON0_PNRMODE_SHIFT (17)
+#define VIDCON0_PNRMODE_RGB (0x0 << 17)
+#define VIDCON0_PNRMODE_BGR (0x1 << 17)
+#define VIDCON0_PNRMODE_SERIAL_RGB (0x2 << 17)
+#define VIDCON0_PNRMODE_SERIAL_BGR (0x3 << 17)
+
+#define VIDCON0_CLKVALUP (1 << 16)
+#define VIDCON0_CLKVAL_F_MASK (0xff << 6)
+#define VIDCON0_CLKVAL_F_SHIFT (6)
+#define VIDCON0_CLKVAL_F_LIMIT (0xff)
+#define VIDCON0_CLKVAL_F(_x) ((_x) << 6)
+#define VIDCON0_VLCKFREE (1 << 5)
+#define VIDCON0_CLKDIR (1 << 4)
+
+#define VIDCON0_CLKSEL_MASK (0x3 << 2)
+#define VIDCON0_CLKSEL_SHIFT (2)
+#define VIDCON0_CLKSEL_HCLK (0x0 << 2)
+#define VIDCON0_CLKSEL_LCD (0x1 << 2)
+#define VIDCON0_CLKSEL_27M (0x3 << 2)
+
+#define VIDCON0_ENVID (1 << 1)
+#define VIDCON0_ENVID_F (1 << 0)
+
+#define VIDCON1 (0x04)
+#define VIDCON1_LINECNT_MASK (0x7ff << 16)
+#define VIDCON1_LINECNT_SHIFT (16)
+#define VIDCON1_LINECNT_GET(_v) (((_v) >> 16) & 0x7ff)
+#define VIDCON1_VSTATUS_MASK (0x3 << 13)
+#define VIDCON1_VSTATUS_SHIFT (13)
+#define VIDCON1_VSTATUS_VSYNC (0x0 << 13)
+#define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13)
+#define VIDCON1_VSTATUS_ACTIVE (0x2 << 13)
+#define VIDCON1_VSTATUS_FRONTPORCH (0x0 << 13)
+
+#define VIDCON1_INV_VCLK (1 << 7)
+#define VIDCON1_INV_HSYNC (1 << 6)
+#define VIDCON1_INV_VSYNC (1 << 5)
+#define VIDCON1_INV_VDEN (1 << 4)
+
+/* VIDCON2 */
+
+#define VIDCON2 (0x08)
+#define VIDCON2_EN601 (1 << 23)
+#define VIDCON2_TVFMTSEL_SW (1 << 14)
+
+#define VIDCON2_TVFMTSEL1_MASK (0x3 << 12)
+#define VIDCON2_TVFMTSEL1_SHIFT (12)
+#define VIDCON2_TVFMTSEL1_RGB (0x0 << 12)
+#define VIDCON2_TVFMTSEL1_YUV422 (0x1 << 12)
+#define VIDCON2_TVFMTSEL1_YUV444 (0x2 << 12)
+
+#define VIDCON2_ORGYCbCr (1 << 8)
+#define VIDCON2_YUVORDCrCb (1 << 7)
+
+/* VIDTCON0 */
+
+#define VIDTCON0_VBPDE_MASK (0xff << 24)
+#define VIDTCON0_VBPDE_SHIFT (24)
+#define VIDTCON0_VBPDE_LIMIT (0xff)
+#define VIDTCON0_VBPDE(_x) ((_x) << 24)
+
+#define VIDTCON0_VBPD_MASK (0xff << 16)
+#define VIDTCON0_VBPD_SHIFT (16)
+#define VIDTCON0_VBPD_LIMIT (0xff)
+#define VIDTCON0_VBPD(_x) ((_x) << 16)
+
+#define VIDTCON0_VFPD_MASK (0xff << 8)
+#define VIDTCON0_VFPD_SHIFT (8)
+#define VIDTCON0_VFPD_LIMIT (0xff)
+#define VIDTCON0_VFPD(_x) ((_x) << 8)
+
+#define VIDTCON0_VSPW_MASK (0xff << 0)
+#define VIDTCON0_VSPW_SHIFT (0)
+#define VIDTCON0_VSPW_LIMIT (0xff)
+#define VIDTCON0_VSPW(_x) ((_x) << 0)
+
+/* VIDTCON1 */
+
+#define VIDTCON1_VFPDE_MASK (0xff << 24)
+#define VIDTCON1_VFPDE_SHIFT (24)
+#define VIDTCON1_VFPDE_LIMIT (0xff)
+#define VIDTCON1_VFPDE(_x) ((_x) << 24)
+
+#define VIDTCON1_HBPD_MASK (0xff << 16)
+#define VIDTCON1_HBPD_SHIFT (16)
+#define VIDTCON1_HBPD_LIMIT (0xff)
+#define VIDTCON1_HBPD(_x) ((_x) << 16)
+
+#define VIDTCON1_HFPD_MASK (0xff << 8)
+#define VIDTCON1_HFPD_SHIFT (8)
+#define VIDTCON1_HFPD_LIMIT (0xff)
+#define VIDTCON1_HFPD(_x) ((_x) << 8)
+
+#define VIDTCON1_HSPW_MASK (0xff << 0)
+#define VIDTCON1_HSPW_SHIFT (0)
+#define VIDTCON1_HSPW_LIMIT (0xff)
+#define VIDTCON1_HSPW(_x) ((_x) << 0)
+
+#define VIDTCON2 (0x18)
+#define VIDTCON2_LINEVAL_MASK (0x7ff << 11)
+#define VIDTCON2_LINEVAL_SHIFT (11)
+#define VIDTCON2_LINEVAL_LIMIT (0x7ff)
+#define VIDTCON2_LINEVAL(_x) ((_x) << 11)
+
+#define VIDTCON2_HOZVAL_MASK (0x7ff << 0)
+#define VIDTCON2_HOZVAL_SHIFT (0)
+#define VIDTCON2_HOZVAL_LIMIT (0x7ff)
+#define VIDTCON2_HOZVAL(_x) ((_x) << 0)
+
+/* WINCONx */
+
+
+#define WINCONx_BITSWP (1 << 18)
+#define WINCONx_BYTSWP (1 << 17)
+#define WINCONx_HAWSWP (1 << 16)
+#define WINCONx_BURSTLEN_MASK (0x3 << 9)
+#define WINCONx_BURSTLEN_SHIFT (9)
+#define WINCONx_BURSTLEN_16WORD (0x0 << 9)
+#define WINCONx_BURSTLEN_8WORD (0x1 << 9)
+#define WINCONx_BURSTLEN_4WORD (0x2 << 9)
+
+#define WINCONx_ENWIN (1 << 0)
+#define WINCON0_BPPMODE_MASK (0xf << 2)
+#define WINCON0_BPPMODE_SHIFT (2)
+#define WINCON0_BPPMODE_1BPP (0x0 << 2)
+#define WINCON0_BPPMODE_2BPP (0x1 << 2)
+#define WINCON0_BPPMODE_4BPP (0x2 << 2)
+#define WINCON0_BPPMODE_8BPP_PALETTE (0x3 << 2)
+#define WINCON0_BPPMODE_16BPP_565 (0x5 << 2)
+#define WINCON0_BPPMODE_16BPP_1555 (0x7 << 2)
+#define WINCON0_BPPMODE_18BPP_666 (0x8 << 2)
+#define WINCON0_BPPMODE_24BPP_888 (0xb << 2)
+
+#define WINCON1_BLD_PIX (1 << 6)
+
+#define WINCON1_ALPHA_SEL (1 << 1)
+#define WINCON1_BPPMODE_MASK (0xf << 2)
+#define WINCON1_BPPMODE_SHIFT (2)
+#define WINCON1_BPPMODE_1BPP (0x0 << 2)
+#define WINCON1_BPPMODE_2BPP (0x1 << 2)
+#define WINCON1_BPPMODE_4BPP (0x2 << 2)
+#define WINCON1_BPPMODE_8BPP_PALETTE (0x3 << 2)
+#define WINCON1_BPPMODE_8BPP_1232 (0x4 << 2)
+#define WINCON1_BPPMODE_16BPP_565 (0x5 << 2)
+#define WINCON1_BPPMODE_16BPP_A1555 (0x6 << 2)
+#define WINCON1_BPPMODE_16BPP_I1555 (0x7 << 2)
+#define WINCON1_BPPMODE_18BPP_666 (0x8 << 2)
+#define WINCON1_BPPMODE_18BPP_A1665 (0x9 << 2)
+#define WINCON1_BPPMODE_19BPP_A1666 (0xa << 2)
+#define WINCON1_BPPMODE_24BPP_888 (0xb << 2)
+#define WINCON1_BPPMODE_24BPP_A1887 (0xc << 2)
+#define WINCON1_BPPMODE_25BPP_A1888 (0xd << 2)
+#define WINCON1_BPPMODE_28BPP_A4888 (0xd << 2)
+
+
+#define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11)
+#define VIDOSDxA_TOPLEFT_X_SHIFT (11)
+#define VIDOSDxA_TOPLEFT_X_LIMIT (0x7ff)
+#define VIDOSDxA_TOPLEFT_X(_x) ((_x) << 11)
+
+#define VIDOSDxA_TOPLEFT_Y_MASK (0x7ff << 0)
+#define VIDOSDxA_TOPLEFT_Y_SHIFT (0)
+#define VIDOSDxA_TOPLEFT_Y_LIMIT (0x7ff)
+#define VIDOSDxA_TOPLEFT_Y(_x) ((_x) << 0)
+
+#define VIDOSDxB_BOTRIGHT_X_MASK (0x7ff << 11)
+#define VIDOSDxB_BOTRIGHT_X_SHIFT (11)
+#define VIDOSDxB_BOTRIGHT_X_LIMIT (0x7ff)
+#define VIDOSDxB_BOTRIGHT_X(_x) ((_x) << 11)
+
+#define VIDOSDxB_BOTRIGHT_Y_MASK (0x7ff << 0)
+#define VIDOSDxB_BOTRIGHT_Y_SHIFT (0)
+#define VIDOSDxB_BOTRIGHT_Y_LIMIT (0x7ff)
+#define VIDOSDxB_BOTRIGHT_Y(_x) ((_x) << 0)
+
+/* For VIDOSD[1..4]C */
+#define VIDISD14C_ALPHA0_R(_x) ((_x) << 20)
+#define VIDISD14C_ALPHA0_G_MASK (0xf << 16)
+#define VIDISD14C_ALPHA0_G_SHIFT (16)
+#define VIDISD14C_ALPHA0_G_LIMIT (0xf)
+#define VIDISD14C_ALPHA0_G(_x) ((_x) << 16)
+#define VIDISD14C_ALPHA0_B_MASK (0xf << 12)
+#define VIDISD14C_ALPHA0_B_SHIFT (12)
+#define VIDISD14C_ALPHA0_B_LIMIT (0xf)
+#define VIDISD14C_ALPHA0_B(_x) ((_x) << 12)
+#define VIDISD14C_ALPHA1_R_MASK (0xf << 8)
+#define VIDISD14C_ALPHA1_R_SHIFT (8)
+#define VIDISD14C_ALPHA1_R_LIMIT (0xf)
+#define VIDISD14C_ALPHA1_R(_x) ((_x) << 8)
+#define VIDISD14C_ALPHA1_G_MASK (0xf << 4)
+#define VIDISD14C_ALPHA1_G_SHIFT (4)
+#define VIDISD14C_ALPHA1_G_LIMIT (0xf)
+#define VIDISD14C_ALPHA1_G(_x) ((_x) << 4)
+#define VIDISD14C_ALPHA1_B_MASK (0xf << 0)
+#define VIDISD14C_ALPHA1_B_SHIFT (0)
+#define VIDISD14C_ALPHA1_B_LIMIT (0xf)
+#define VIDISD14C_ALPHA1_B(_x) ((_x) << 0)
+
+/* Video buffer addresses */
+#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8))
+#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8))
+#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8))
+#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8))
+#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4))
+
+#define VIDW_BUF_SIZE_OFFSET_MASK (0x1fff << 13)
+#define VIDW_BUF_SIZE_OFFSET_SHIFT (13)
+#define VIDW_BUF_SIZE_OFFSET_LIMIT (0x1fff)
+#define VIDW_BUF_SIZE_OFFSET(_x) ((_x) << 13)
+
+#define VIDW_BUF_SIZE_PAGEWIDTH_MASK (0x1fff << 0)
+#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT (0)
+#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT (0x1fff)
+#define VIDW_BUF_SIZE_PAGEWIDTH(_x) ((_x) << 0)
+
+/* Interrupt controls and status */
+
+#define VIDINTCON0_FIFOINTERVAL_MASK (0x3f << 20)
+#define VIDINTCON0_FIFOINTERVAL_SHIFT (20)
+#define VIDINTCON0_FIFOINTERVAL_LIMIT (0x3f)
+#define VIDINTCON0_FIFOINTERVAL(_x) ((_x) << 20)
+
+#define VIDINTCON0_INT_SYSMAINCON (1 << 19)
+#define VIDINTCON0_INT_SYSSUBCON (1 << 18)
+#define VIDINTCON0_INT_I80IFDONE (1 << 17)
+
+#define VIDINTCON0_FRAMESEL0_MASK (0x3 << 15)
+#define VIDINTCON0_FRAMESEL0_SHIFT (15)
+#define VIDINTCON0_FRAMESEL0_BACKPORCH (0x0 << 15)
+#define VIDINTCON0_FRAMESEL0_VSYNC (0x1 << 15)
+#define VIDINTCON0_FRAMESEL0_ACTIVE (0x2 << 15)
+#define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15)
+
+#define VIDINTCON0_FRAMESEL1 (1 << 14)
+#define VIDINTCON0_FRAMESEL1_NONE (0x0 << 14)
+#define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 14)
+#define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 14)
+#define VIDINTCON0_FRAMESEL1_FRONTPORCH (0x3 << 14)
+
+#define VIDINTCON0_INT_FRAME (1 << 12)
+#define VIDINTCON0_FIFIOSEL_MASK (0x7f << 5)
+#define VIDINTCON0_FIFIOSEL_SHIFT (5)
+#define VIDINTCON0_FIFIOSEL_WINDOW0 (0x1 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW1 (0x2 << 5)
+
+#define VIDINTCON0_FIFOLEVEL_MASK (0x7 << 2)
+#define VIDINTCON0_FIFOLEVEL_SHIFT (2)
+#define VIDINTCON0_FIFOLEVEL_TO25PC (0x0 << 2)
+#define VIDINTCON0_FIFOLEVEL_TO50PC (0x1 << 2)
+#define VIDINTCON0_FIFOLEVEL_TO75PC (0x2 << 2)
+#define VIDINTCON0_FIFOLEVEL_EMPTY (0x3 << 2)
+#define VIDINTCON0_FIFOLEVEL_FULL (0x4 << 2)
+
+#define VIDINTCON0_INT_FIFO_MASK (0x3 << 0)
+#define VIDINTCON0_INT_FIFO_SHIFT (0)
+#define VIDINTCON0_INT_ENABLE (1 << 0)
+
+#define VIDINTCON1 (0x134)
+#define VIDINTCON1_INT_I180 (1 << 2)
+#define VIDINTCON1_INT_FRAME (1 << 1)
+#define VIDINTCON1_INT_FIFO (1 << 0)
+
+/* Window colour-key control registers */
+
+#define WxKEYCON0_KEYBL_EN (1 << 26)
+#define WxKEYCON0_KEYEN_F (1 << 25)
+#define WxKEYCON0_DIRCON (1 << 24)
+#define WxKEYCON0_COMPKEY_MASK (0xffffff << 0)
+#define WxKEYCON0_COMPKEY_SHIFT (0)
+#define WxKEYCON0_COMPKEY_LIMIT (0xffffff)
+#define WxKEYCON0_COMPKEY(_x) ((_x) << 0)
+#define WxKEYCON1_COLVAL_MASK (0xffffff << 0)
+#define WxKEYCON1_COLVAL_SHIFT (0)
+#define WxKEYCON1_COLVAL_LIMIT (0xffffff)
+#define WxKEYCON1_COLVAL(_x) ((_x) << 0)
+
+
+/* Window blanking (MAP) */
+
+#define WINxMAP_MAP (1 << 24)
+#define WINxMAP_MAP_COLOUR_MASK (0xffffff << 0)
+#define WINxMAP_MAP_COLOUR_SHIFT (0)
+#define WINxMAP_MAP_COLOUR_LIMIT (0xffffff)
+#define WINxMAP_MAP_COLOUR(_x) ((_x) << 0)
+
+#define WPALCON_PAL_UPDATE (1 << 9)
+#define WPALCON_W1PAL_MASK (0x7 << 3)
+#define WPALCON_W1PAL_SHIFT (3)
+#define WPALCON_W1PAL_25BPP_A888 (0x0 << 3)
+#define WPALCON_W1PAL_24BPP (0x1 << 3)
+#define WPALCON_W1PAL_19BPP_A666 (0x2 << 3)
+#define WPALCON_W1PAL_18BPP_A665 (0x3 << 3)
+#define WPALCON_W1PAL_18BPP (0x4 << 3)
+#define WPALCON_W1PAL_16BPP_A555 (0x5 << 3)
+#define WPALCON_W1PAL_16BPP_565 (0x6 << 3)
+
+#define WPALCON_W0PAL_MASK (0x7 << 0)
+#define WPALCON_W0PAL_SHIFT (0)
+#define WPALCON_W0PAL_25BPP_A888 (0x0 << 0)
+#define WPALCON_W0PAL_24BPP (0x1 << 0)
+#define WPALCON_W0PAL_19BPP_A666 (0x2 << 0)
+#define WPALCON_W0PAL_18BPP_A665 (0x3 << 0)
+#define WPALCON_W0PAL_18BPP (0x4 << 0)
+#define WPALCON_W0PAL_16BPP_A555 (0x5 << 0)
+#define WPALCON_W0PAL_16BPP_565 (0x6 << 0)
+
diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-s3c/include/plat/regs-sdhci.h
new file mode 100644
index 000000000000..e34049ad44cc
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-sdhci.h
@@ -0,0 +1,87 @@
+/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_REGS_H
+#define __PLAT_S3C_SDHCI_REGS_H __FILE__
+
+#define S3C_SDHCI_CONTROL2 (0x80)
+#define S3C_SDHCI_CONTROL3 (0x84)
+#define S3C64XX_SDHCI_CONTROL4 (0x8C)
+
+#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31)
+#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30)
+#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29)
+#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28)
+
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24)
+
+#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16)
+#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16)
+#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16)
+
+#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15)
+#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14)
+#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13)
+#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12)
+#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11)
+
+#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9)
+#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9)
+
+#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8)
+#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7)
+#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6)
+#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4)
+#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4)
+#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3)
+#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1)
+#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0)
+
+#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31)
+#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23)
+#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15)
+#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7)
+
+#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24)
+#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24)
+#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24)
+
+#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16)
+#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16)
+#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16)
+
+#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8)
+#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8)
+#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8)
+
+#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0)
+#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0)
+#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0)
+
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16)
+
+#define S3C64XX_SDHCI_CONTROL4_BUSY (1)
+
+#endif /* __PLAT_S3C_SDHCI_REGS_H */
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
new file mode 100644
index 000000000000..c4ca3920ca4b
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -0,0 +1,108 @@
+/* linux/arch/arm/plat-s3c/include/plat/sdhci.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_H
+#define __PLAT_S3C_SDHCI_H __FILE__
+
+struct platform_device;
+struct mmc_host;
+struct mmc_card;
+struct mmc_ios;
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ * @cfg_card: Configure the interface for a specific card and speed. This
+ * is necessary the controllers and/or GPIO blocks require the
+ * changing of driver-strength and other controls dependant on
+ * the card and speed of operation.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+ unsigned int max_width;
+ unsigned int host_caps;
+
+ char **clocks; /* set of clock sources */
+
+ void (*cfg_gpio)(struct platform_device *dev, int width);
+ void (*cfg_card)(struct platform_device *dev,
+ void __iomem *regbase,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+};
+
+/**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use withe S3C SDHCI device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+
+/* Default platform data, exported so that per-cpu initialisation can
+ * set the correct one when there are more than one cpu type selected.
+*/
+
+extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+
+/* Helper function availablity */
+
+#ifdef CONFIG_S3C6410_SETUP_SDHCI
+extern char *s3c6410_hsmmc_clksrcs[4];
+
+extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s3c6410_default_sdhci0(void)
+{
+ s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6410_default_sdhci1(void)
+{
+ s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+static inline void s3c6410_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6410_SETUP_SDHCI */
+
+#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index a8cfdefc29e9..1e0767b266b8 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -33,6 +33,9 @@ obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
+# device specific setup and/or initialisation
+obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
+
# SPI gpio central GPIO functions
obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 9826efb91e48..14d4f0bc1253 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -271,31 +271,6 @@ struct platform_device s3c_device_wdt = {
EXPORT_SYMBOL(s3c_device_wdt);
-/* I2C */
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C24XX_PA_IIC,
- .end = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC,
- .end = IRQ_IIC,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_i2c = {
- .name = "s3c2410-i2c",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_i2c);
-
/* IIS */
static struct resource s3c_iis_resource[] = {
@@ -411,36 +386,6 @@ struct platform_device s3c_device_sdi = {
EXPORT_SYMBOL(s3c_device_sdi);
-/* High-speed MMC/SD */
-
-static struct resource s3c_hsmmc_resource[] = {
- [0] = {
- .start = S3C2443_PA_HSMMC,
- .end = S3C2443_PA_HSMMC + S3C2443_SZ_HSMMC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3C2443_HSMMC,
- .end = IRQ_S3C2443_HSMMC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_hsmmc = {
- .name = "s3c-sdhci",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_hsmmc_resource),
- .resource = s3c_hsmmc_resource,
- .dev = {
- .dma_mask = &s3c_device_hsmmc_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-
-
/* SPI (0) */
static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index b07c2d0dd533..f95c6c9d9f1a 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,104 +19,12 @@
#include <linux/io.h>
#include <linux/gpio.h>
+#include <plat/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
-struct s3c24xx_gpio_chip {
- struct gpio_chip chip;
- void __iomem *base;
-};
-
-static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
-{
- return container_of(gpc, struct s3c24xx_gpio_chip, chip);
-}
-
-/* these routines are exported for use by other parts of the platform
- * and system support, but are not intended to be used directly by the
- * drivers themsevles.
- */
-
-static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long con;
-
- local_irq_save(flags);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
- con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
-
- __raw_writel(con, base + 0x00);
-
- local_irq_restore(flags);
- return 0;
-}
-
-static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- local_irq_save(flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- con = __raw_readl(base + 0x00);
- con &= ~(3 << (offset * 2));
- con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
- return 0;
-}
-
-static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
-
- local_irq_save(flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
-}
-
-static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
- unsigned long val;
-
- val = __raw_readl(ourchip->base + 0x04);
- val >>= offset;
- val &= 1;
-
- return val;
-}
-
static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
{
return -EINVAL;
@@ -125,7 +33,7 @@ static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
unsigned offset, int value)
{
- struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long flags;
unsigned long dat;
@@ -151,7 +59,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
return 0;
}
-static struct s3c24xx_gpio_chip gpios[] = {
+struct s3c_gpio_chip s3c24xx_gpios[] = {
[0] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
.chip = {
@@ -219,34 +127,13 @@ static struct s3c24xx_gpio_chip gpios[] = {
},
};
-static __init void s3c24xx_gpiolib_add(struct s3c24xx_gpio_chip *chip)
-{
- struct gpio_chip *gc = &chip->chip;
-
- BUG_ON(!chip->base);
- BUG_ON(!gc->label);
- BUG_ON(!gc->ngpio);
-
- if (!gc->direction_input)
- gc->direction_input = s3c24xx_gpiolib_input;
- if (!gc->direction_output)
- gc->direction_output = s3c24xx_gpiolib_output;
- if (!gc->set)
- gc->set = s3c24xx_gpiolib_set;
- if (!gc->get)
- gc->get = s3c24xx_gpiolib_get;
-
- /* gpiochip_add() prints own failure message on error. */
- gpiochip_add(gc);
-}
-
static __init int s3c24xx_gpiolib_init(void)
{
- struct s3c24xx_gpio_chip *chip = gpios;
+ struct s3c_gpio_chip *chip = s3c24xx_gpios;
int gpn;
- for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
- s3c24xx_gpiolib_add(chip);
+ for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++)
+ s3c_gpiolib_add(chip);
return 0;
}
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index e7be0c0d3702..fef8ea8b8e1e 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -51,7 +51,6 @@
/* Standard size definitions for peripheral blocks. */
-#define S3C24XX_SZ_IIC SZ_1M
#define S3C24XX_SZ_IIS SZ_1M
#define S3C24XX_SZ_ADC SZ_1M
#define S3C24XX_SZ_SPI SZ_1M
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 494368403055..c1de6bb0101b 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -68,7 +68,7 @@ void __init s3c244x_map_io(void)
/* rename any peripherals used differing from the s3c2410 */
s3c_device_sdi.name = "s3c2440-sdi";
- s3c_device_i2c.name = "s3c2440-i2c";
+ s3c_device_i2c0.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
}
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
new file mode 100644
index 000000000000..d62b7e7fb355
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c24xx/setup-i2c.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Base setup for i2c device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+
+struct platform_device;
+
+#include <plat/iic.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
+ s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index bd832ba0cf77..203dd730d1ca 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -14,6 +14,10 @@ config PLAT_S3C64XX
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select S3C_GPIO_TRACK
+ select S3C_GPIO_PULL_UPDOWN
+ select S3C_GPIO_CFG_S3C24XX
+ select S3C_GPIO_CFG_S3C64XX
help
Base platform code for any Samsung S3C64XX device
@@ -33,4 +37,25 @@ config CPU_S3C6400_CLOCK
Common clock support code for the S3C6400 that is shared
by other CPUs in the series, such as the S3C6410.
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+ bool
+ default y
+ help
+ Common setup code for i2c bus 0.
+
+ Note, currently since i2c0 is always compiled, this setup helper
+ is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S3C64XX with an 24bpp RGB display helper.
+
endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 9c09b0819805..2e6d79bf8f33 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -17,8 +17,15 @@ obj-y += cpu.o
obj-y += irq.o
obj-y += irq-eint.o
obj-y += clock.o
+obj-y += gpiolib.o
# CPU support
obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o
obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
new file mode 100644
index 000000000000..cc62941d7b5c
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -0,0 +1,420 @@
+/* arch/arm/plat-s3c64xx/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 8 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * D 5 4Bit Yes 3
+ * E 5 4Bit Yes None
+ * F 16 2Bit Yes 4 [1]
+ * G 7 4Bit Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * K 16 4Bit[2] No None
+ * L 15 4Bit[2] No None
+ * M 6 4Bit No IRQ_EINT
+ * N 16 2Bit No IRQ_EINT
+ * O 16 2Bit Yes 7
+ * P 15 2Bit Yes 8
+ * Q 9 2Bit Yes 9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+#define OFF_GPCON (0x00)
+#define OFF_GPDAT (0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while(0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#endif
+
+/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+
+ con = __raw_readl(base + OFF_GPCON);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, base + OFF_GPCON);
+
+ gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+ unsigned long dat;
+
+ con = __raw_readl(base + OFF_GPCON);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + OFF_GPDAT);
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + OFF_GPDAT);
+ __raw_writel(con, base + OFF_GPCON);
+ __raw_writel(dat, base + OFF_GPDAT);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+*/
+
+static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+
+ if (offset > 7)
+ offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+ return 0;
+
+}
+
+static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+
+ if (offset > 7)
+ offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + OFF_GPDAT);
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + OFF_GPDAT);
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + OFF_GPDAT);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
+ .cfg_eint = 7,
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
+ .cfg_eint = 3,
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip gpio_4bit[] = {
+ {
+ .base = S3C64XX_GPA_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPA(0),
+ .ngpio = S3C64XX_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .base = S3C64XX_GPB_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPB(0),
+ .ngpio = S3C64XX_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .base = S3C64XX_GPC_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPC(0),
+ .ngpio = S3C64XX_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S3C64XX_GPD_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPD(0),
+ .ngpio = S3C64XX_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .base = S3C64XX_GPE_BASE,
+ .config = &gpio_4bit_cfg_noint,
+ .chip = {
+ .base = S3C64XX_GPE(0),
+ .ngpio = S3C64XX_GPIO_E_NR,
+ .label = "GPE",
+ },
+ }, {
+ .base = S3C64XX_GPG_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPG(0),
+ .ngpio = S3C64XX_GPIO_G_NR,
+ .label = "GPG",
+ },
+ }, {
+ .base = S3C64XX_GPM_BASE,
+ .config = &gpio_4bit_cfg_eint0011,
+ .chip = {
+ .base = S3C64XX_GPM(0),
+ .ngpio = S3C64XX_GPIO_M_NR,
+ .label = "GPM",
+ },
+ },
+};
+
+static struct s3c_gpio_chip gpio_4bit2[] = {
+ {
+ .base = S3C64XX_GPH_BASE + 0x4,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPH(0),
+ .ngpio = S3C64XX_GPIO_H_NR,
+ .label = "GPH",
+ },
+ }, {
+ .base = S3C64XX_GPK_BASE + 0x4,
+ .config = &gpio_4bit_cfg_noint,
+ .chip = {
+ .base = S3C64XX_GPK(0),
+ .ngpio = S3C64XX_GPIO_K_NR,
+ .label = "GPK",
+ },
+ }, {
+ .base = S3C64XX_GPL_BASE + 0x4,
+ .config = &gpio_4bit_cfg_eint0011,
+ .chip = {
+ .base = S3C64XX_GPL(0),
+ .ngpio = S3C64XX_GPIO_L_NR,
+ .label = "GPL",
+ },
+ },
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
+ .cfg_eint = 2,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
+ .cfg_eint = 3,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip gpio_2bit[] = {
+ {
+ .base = S3C64XX_GPF_BASE,
+ .config = &gpio_2bit_cfg_eint11,
+ .chip = {
+ .base = S3C64XX_GPF(0),
+ .ngpio = S3C64XX_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S3C64XX_GPI_BASE,
+ .config = &gpio_2bit_cfg_noint,
+ .chip = {
+ .base = S3C64XX_GPI(0),
+ .ngpio = S3C64XX_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S3C64XX_GPJ_BASE,
+ .config = &gpio_2bit_cfg_noint,
+ .chip = {
+ .base = S3C64XX_GPJ(0),
+ .ngpio = S3C64XX_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S3C64XX_GPN_BASE,
+ .config = &gpio_2bit_cfg_eint10,
+ .chip = {
+ .base = S3C64XX_GPN(0),
+ .ngpio = S3C64XX_GPIO_N_NR,
+ .label = "GPN",
+ },
+ }, {
+ .base = S3C64XX_GPO_BASE,
+ .config = &gpio_2bit_cfg_eint11,
+ .chip = {
+ .base = S3C64XX_GPO(0),
+ .ngpio = S3C64XX_GPIO_O_NR,
+ .label = "GPO",
+ },
+ }, {
+ .base = S3C64XX_GPP_BASE,
+ .config = &gpio_2bit_cfg_eint11,
+ .chip = {
+ .base = S3C64XX_GPP(0),
+ .ngpio = S3C64XX_GPIO_P_NR,
+ .label = "GPP",
+ },
+ }, {
+ .base = S3C64XX_GPQ_BASE,
+ .config = &gpio_2bit_cfg_eint11,
+ .chip = {
+ .base = S3C64XX_GPQ(0),
+ .ngpio = S3C64XX_GPIO_Q_NR,
+ .label = "GPQ",
+ },
+ },
+};
+
+static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+ chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
+ chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+}
+
+static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+ chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
+ chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+}
+
+static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
+ int nr_chips,
+ void (*fn)(struct s3c_gpio_chip *))
+{
+ for (; nr_chips > 0; nr_chips--, chips++) {
+ if (fn)
+ (fn)(chips);
+ s3c_gpiolib_add(chips);
+ }
+}
+
+static __init int s3c64xx_gpiolib_init(void)
+{
+ s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
+ s3c64xx_gpiolib_add_4bit);
+
+ s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
+ s3c64xx_gpiolib_add_4bit2);
+
+ s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+
+ return 0;
+}
+
+arch_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
new file mode 100644
index 000000000000..9aa0e427d113
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
@@ -0,0 +1,48 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank A register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00)
+#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04)
+#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08)
+#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c)
+#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10)
+
+#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0)
+#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0)
+
+#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4)
+#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4)
+
+#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8)
+#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8)
+
+#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12)
+#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12)
+
+#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16)
+#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16)
+
+#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20)
+#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20)
+
+#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24)
+#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24)
+
+#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28)
+#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
new file mode 100644
index 000000000000..3933adb4d50a
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
@@ -0,0 +1,60 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank B register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00)
+#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04)
+#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08)
+#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c)
+#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10)
+
+#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0)
+#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0)
+#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0)
+#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0)
+#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0)
+
+#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4)
+#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4)
+#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4)
+#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4)
+#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4)
+
+#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8)
+#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8)
+#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8)
+#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8)
+#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8)
+#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8)
+
+#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12)
+#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12)
+#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12)
+#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12)
+#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12)
+
+#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16)
+#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16)
+#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16)
+#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16)
+
+#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20)
+#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20)
+
+#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24)
+#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
new file mode 100644
index 000000000000..c47daf7e2723
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
@@ -0,0 +1,53 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank C register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00)
+#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04)
+#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08)
+#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c)
+#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10)
+
+#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0)
+#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0)
+
+#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4)
+#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4)
+
+#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8)
+#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8)
+
+#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12)
+#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12)
+
+#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16)
+#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16)
+#define S3C64XX_GPC4_I2S0_V40_DO (0x05 << 16)
+#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16)
+
+#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20)
+#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20)
+#define S3C64XX_GPC5_I2S1_V40_DO (0x05 << 20)
+#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20)
+
+#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24)
+#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24)
+
+#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28)
+#define S3C64XX_GPC7_I2S2_V40_DO (0x05 << 28)
+#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
new file mode 100644
index 000000000000..6fe4a49c26f0
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
@@ -0,0 +1,49 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank D register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00)
+#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04)
+#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08)
+#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c)
+#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10)
+
+#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0)
+#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0)
+#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0)
+#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0)
+
+#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4)
+#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4)
+#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4)
+#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4)
+
+#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8)
+#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8)
+#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8)
+#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8)
+
+#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12)
+#define S3C64XX_GPD3_I2S0_DI (0x03 << 12)
+#define S3C64XX_GPD3_AC97_SDI (0x04 << 12)
+#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12)
+
+#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16)
+#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16)
+#define S3C64XX_GPD4_AC97_SDO (0x04 << 16)
+#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
new file mode 100644
index 000000000000..7fcf3d8e0a48
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank E register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00)
+#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04)
+#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08)
+#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c)
+#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10)
+
+#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0)
+#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0)
+#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0)
+
+#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4)
+#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4)
+#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4)
+
+#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8)
+#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8)
+#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8)
+
+#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12)
+#define S3C64XX_GPE3_I2S1_DI (0x03 << 12)
+#define S3C64XX_GPE3_AC97_SDI (0x04 << 12)
+
+#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16)
+#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16)
+#define S3C64XX_GPE4_AC97_SDO (0x04 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
new file mode 100644
index 000000000000..f3faff974a18
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank F register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00)
+#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04)
+#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08)
+#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c)
+#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10)
+
+#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0)
+#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0)
+
+#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2)
+#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2)
+
+#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4)
+#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4)
+
+#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6)
+#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6)
+
+#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8)
+#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8)
+
+#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10)
+#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10)
+
+#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12)
+#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12)
+
+#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14)
+#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14)
+
+#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16)
+#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16)
+
+#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18)
+#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18)
+
+#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20)
+#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20)
+
+#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22)
+#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22)
+
+#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24)
+#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24)
+
+#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26)
+#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26)
+
+#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28)
+#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28)
+
+#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
new file mode 100644
index 000000000000..35bbd2378e55
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
@@ -0,0 +1,42 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank G register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00)
+#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04)
+#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08)
+#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c)
+#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10)
+
+#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0)
+#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0)
+
+#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4)
+#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4)
+
+#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8)
+#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8)
+
+#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12)
+#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12)
+
+#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16)
+#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16)
+
+#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20)
+#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
new file mode 100644
index 000000000000..81549516572f
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
@@ -0,0 +1,74 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank H register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00)
+#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04)
+#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08)
+#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c)
+#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10)
+#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14)
+
+#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0)
+#define S3C64XX_GPH0_KP_COL0 (0x04 << 0)
+#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0)
+
+#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4)
+#define S3C64XX_GPH1_KP_COL1 (0x04 << 4)
+#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4)
+
+#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8)
+#define S3C64XX_GPH2_KP_COL2 (0x04 << 8)
+#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8)
+
+#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12)
+#define S3C64XX_GPH3_KP_COL3 (0x04 << 12)
+#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12)
+
+#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16)
+#define S3C64XX_GPH4_KP_COL4 (0x04 << 16)
+#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16)
+
+#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20)
+#define S3C64XX_GPH5_KP_COL5 (0x04 << 20)
+#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20)
+
+#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24)
+#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24)
+#define S3C64XX_GPH6_KP_COL6 (0x04 << 24)
+#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24)
+#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24)
+#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24)
+
+#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28)
+#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28)
+#define S3C64XX_GPH7_KP_COL7 (0x04 << 28)
+#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28)
+#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28)
+#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28)
+
+#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32)
+#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32)
+#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32)
+#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32)
+#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32)
+
+#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36)
+#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36)
+#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36)
+#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
new file mode 100644
index 000000000000..ce9ebe335566
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank I register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00)
+#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04)
+#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08)
+#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c)
+#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10)
+
+#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPI0_VD0 (0x02 << 0)
+#define S3C64XX_GPI1_VD1 (0x02 << 2)
+#define S3C64XX_GPI2_VD2 (0x02 << 4)
+#define S3C64XX_GPI3_VD3 (0x02 << 6)
+#define S3C64XX_GPI4_VD4 (0x02 << 8)
+#define S3C64XX_GPI5_VD5 (0x02 << 10)
+#define S3C64XX_GPI6_VD6 (0x02 << 12)
+#define S3C64XX_GPI7_VD7 (0x02 << 14)
+#define S3C64XX_GPI8_VD8 (0x02 << 16)
+#define S3C64XX_GPI9_VD9 (0x02 << 18)
+#define S3C64XX_GPI10_VD10 (0x02 << 20)
+#define S3C64XX_GPI11_VD11 (0x02 << 22)
+#define S3C64XX_GPI12_VD12 (0x02 << 24)
+#define S3C64XX_GPI13_VD13 (0x02 << 26)
+#define S3C64XX_GPI14_VD14 (0x02 << 28)
+#define S3C64XX_GPI15_VD15 (0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
new file mode 100644
index 000000000000..21a906299d30
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank J register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00)
+#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04)
+#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08)
+#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c)
+#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10)
+
+#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPJ0_VD16 (0x02 << 0)
+#define S3C64XX_GPJ1_VD17 (0x02 << 2)
+#define S3C64XX_GPJ2_VD18 (0x02 << 4)
+#define S3C64XX_GPJ3_VD19 (0x02 << 6)
+#define S3C64XX_GPJ4_VD20 (0x02 << 8)
+#define S3C64XX_GPJ5_VD21 (0x02 << 10)
+#define S3C64XX_GPJ6_VD22 (0x02 << 12)
+#define S3C64XX_GPJ7_VD23 (0x02 << 14)
+#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16)
+#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18)
+#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20)
+#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
new file mode 100644
index 000000000000..569e76120881
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank N register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
+#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08)
+
+#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPN0_EINT0 (0x02 << 0)
+#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0)
+
+#define S3C64XX_GPN1_EINT1 (0x02 << 2)
+#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2)
+
+#define S3C64XX_GPN2_EINT2 (0x02 << 4)
+#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4)
+
+#define S3C64XX_GPN3_EINT3 (0x02 << 6)
+#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6)
+
+#define S3C64XX_GPN4_EINT4 (0x02 << 8)
+#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8)
+
+#define S3C64XX_GPN5_EINT5 (0x02 << 10)
+#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10)
+
+#define S3C64XX_GPN6_EINT6 (0x02 << 12)
+#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12)
+
+#define S3C64XX_GPN7_EINT7 (0x02 << 14)
+#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14)
+
+#define S3C64XX_GPN8_EINT8 (0x02 << 16)
+#define S3C64XX_GPN9_EINT9 (0x02 << 18)
+#define S3C64XX_GPN10_EINT10 (0x02 << 20)
+#define S3C64XX_GPN11_EINT11 (0x02 << 22)
+#define S3C64XX_GPN12_EINT12 (0x02 << 24)
+#define S3C64XX_GPN13_EINT13 (0x02 << 26)
+#define S3C64XX_GPN14_EINT14 (0x02 << 28)
+#define S3C64XX_GPN15_EINT15 (0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
new file mode 100644
index 000000000000..b09e12954b57
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank O register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00)
+#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04)
+#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08)
+#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c)
+#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10)
+
+#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0)
+#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0)
+
+#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2)
+#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2)
+
+#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4)
+#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4)
+
+#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6)
+#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6)
+
+#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8)
+
+#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10)
+
+#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12)
+#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12)
+
+#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14)
+#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14)
+
+#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16)
+#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16)
+
+#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18)
+#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18)
+
+#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20)
+#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20)
+
+#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22)
+#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22)
+
+#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24)
+#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24)
+
+#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26)
+#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26)
+
+#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28)
+#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28)
+
+#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30)
+#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
new file mode 100644
index 000000000000..92f00517926b
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank P register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00)
+#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04)
+#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08)
+#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c)
+#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10)
+
+#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0)
+#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0)
+
+#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2)
+#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2)
+
+#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4)
+#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4)
+
+#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6)
+#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6)
+
+#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8)
+#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8)
+
+#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10)
+#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10)
+
+#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12)
+#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12)
+
+#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14)
+#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14)
+
+#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16)
+#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16)
+
+#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18)
+#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18)
+
+#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20)
+#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20)
+
+#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22)
+#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22)
+
+#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24)
+#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24)
+
+#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26)
+#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26)
+
+#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28)
+#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
new file mode 100644
index 000000000000..565e60aaee47
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank Q register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00)
+#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04)
+#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08)
+#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c)
+#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10)
+
+#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2))
+#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0)
+#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0)
+
+#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2)
+#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2)
+
+#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4)
+
+#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6)
+
+#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8)
+
+#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10)
+
+#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12)
+
+#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14)
+#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14)
+
+#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16)
+#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index bc25689c3f83..02e8dd4c97d5 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -70,6 +70,7 @@
#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3)
#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4)
#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5)
#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6)
#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6)
#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7)
@@ -144,6 +145,10 @@
#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3)
#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4)
+/* compatibility for device defines */
+
+#define IRQ_IIC1 IRQ_S3C6410_IIC1
+
/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
* we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
* which we place after the pair of VICs. */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
new file mode 100644
index 000000000000..75b873d82808
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
@@ -0,0 +1,35 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
+
+/* Base addresses for each of the banks */
+
+#define S3C64XX_GPA_BASE (S3C64XX_VA_GPIO + 0x0000)
+#define S3C64XX_GPB_BASE (S3C64XX_VA_GPIO + 0x0020)
+#define S3C64XX_GPC_BASE (S3C64XX_VA_GPIO + 0x0040)
+#define S3C64XX_GPD_BASE (S3C64XX_VA_GPIO + 0x0060)
+#define S3C64XX_GPE_BASE (S3C64XX_VA_GPIO + 0x0080)
+#define S3C64XX_GPF_BASE (S3C64XX_VA_GPIO + 0x00A0)
+#define S3C64XX_GPG_BASE (S3C64XX_VA_GPIO + 0x00C0)
+#define S3C64XX_GPH_BASE (S3C64XX_VA_GPIO + 0x00E0)
+#define S3C64XX_GPI_BASE (S3C64XX_VA_GPIO + 0x0100)
+#define S3C64XX_GPJ_BASE (S3C64XX_VA_GPIO + 0x0120)
+#define S3C64XX_GPK_BASE (S3C64XX_VA_GPIO + 0x0800)
+#define S3C64XX_GPL_BASE (S3C64XX_VA_GPIO + 0x0810)
+#define S3C64XX_GPM_BASE (S3C64XX_VA_GPIO + 0x0820)
+#define S3C64XX_GPN_BASE (S3C64XX_VA_GPIO + 0x0830)
+#define S3C64XX_GPO_BASE (S3C64XX_VA_GPIO + 0x0140)
+#define S3C64XX_GPP_BASE (S3C64XX_VA_GPIO + 0x0160)
+#define S3C64XX_GPQ_BASE (S3C64XX_VA_GPIO + 0x0180)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
new file mode 100644
index 000000000000..8e28e448dd20
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+extern void s3c64xx_fb_gpio_setup_24bpp(void)
+{
+ unsigned int gpio;
+
+ for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/plat-s3c64xx/setup-i2c0.c
new file mode 100644
index 000000000000..364480763728
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-i2c0.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 0 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-bank-b.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
+ s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
+ s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/plat-s3c64xx/setup-i2c1.c
new file mode 100644
index 000000000000..bbe229bd90ca
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-i2c1.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 1 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-bank-b.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
+ s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
+ s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+}