diff options
Diffstat (limited to 'arch/arm')
670 files changed, 11846 insertions, 28991 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2cc99bfb3af7..916cedbd7a67 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -65,7 +65,6 @@ config ARM select HAVE_UID16 select HAVE_VIRT_CPU_ACCOUNTING_GEN select IRQ_FORCED_THREADING - select KTIME_SCALAR select MODULES_USE_ELF_REL select NO_BOOTMEM select OLD_SIGACTION @@ -240,13 +239,6 @@ config ARM_PATCH_PHYS_VIRT this feature (eg, building a kernel for a single machine) and you need to shrink the kernel to the minimal size. -config NEED_MACH_GPIO_H - bool - help - Select this when mach/gpio.h is required to provide special - definitions for this platform. The need for mach/gpio.h should - be avoided when possible. - config NEED_MACH_IO_H bool help @@ -263,8 +255,22 @@ config NEED_MACH_MEMORY_H config PHYS_OFFSET hex "Physical address of main memory" if MMU - depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + depends on !ARM_PATCH_PHYS_VIRT default DRAM_BASE if !MMU + default 0x00000000 if ARCH_EBSA110 || \ + EP93XX_SDCE3_SYNC_PHYS_OFFSET || \ + ARCH_FOOTBRIDGE || \ + ARCH_INTEGRATOR || \ + ARCH_IOP13XX || \ + ARCH_KS8695 || \ + (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) + default 0x10000000 if ARCH_OMAP1 || ARCH_RPC + default 0x20000000 if ARCH_S5PV210 + default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET + default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100 + default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET + default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET + default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET help Please provide the physical address corresponding to the location of main memory in your system. @@ -313,7 +319,7 @@ config ARCH_MULTIPLATFORM config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA - select ARM_PATCH_PHYS_VIRT + select ARM_PATCH_PHYS_VIRT if MMU select AUTO_ZRELADDR select COMMON_CLK select COMMON_CLK_VERSATILE @@ -321,7 +327,6 @@ config ARCH_INTEGRATOR select HAVE_TCM select ICST select MULTI_IRQ_HANDLER - select NEED_MACH_MEMORY_H select PLAT_VERSATILE select SPARSE_IRQ select USE_OF @@ -341,7 +346,6 @@ config ARCH_REALVIEW select ICST select NEED_MACH_MEMORY_H select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD help This enables support for ARM Ltd RealView boards. @@ -356,7 +360,6 @@ config ARCH_VERSATILE select HAVE_MACH_CLKDEV select ICST select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_CLOCK select VERSATILE_FPGA_IRQ help @@ -436,7 +439,6 @@ config ARCH_EP93XX select ARM_VIC select CLKDEV_LOOKUP select CPU_ARM920T - select NEED_MACH_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -529,21 +531,6 @@ config ARCH_DOVE help Support for the Marvell Dove SoC 88AP510 -config ARCH_KIRKWOOD - bool "Marvell Kirkwood" - select ARCH_REQUIRE_GPIOLIB - select CPU_FEROCEON - select GENERIC_CLOCKEVENTS - select MVEBU_MBUS - select PCI - select PCI_QUIRKS - select PINCTRL - select PINCTRL_KIRKWOOD - select PLAT_ORION_LEGACY - help - Support for the following Marvell Kirkwood series SoCs: - 88F6180, 88F6192 and 88F6281. - config ARCH_MV78XX0 bool "Marvell MV78xx0" select ARCH_REQUIRE_GPIOLIB @@ -635,6 +622,7 @@ config ARCH_PXA select AUTO_ZRELADDR select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE @@ -659,7 +647,7 @@ config ARCH_MSM config ARCH_SHMOBILE_LEGACY bool "Renesas ARM SoCs (non-multiplatform)" select ARCH_SHMOBILE - select ARM_PATCH_PHYS_VIRT + select ARM_PATCH_PHYS_VIRT if MMU select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP @@ -759,61 +747,6 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems -config ARCH_S5P64X0 - bool "Samsung S5P6440 S5P6450" - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V6 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select SAMSUNG_ATAGS - select SAMSUNG_WDT_RESET - help - Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, - SMDK6450. - -config ARCH_S5PC100 - bool "Samsung S5PC100" - select ARCH_REQUIRE_GPIOLIB - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V7 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select SAMSUNG_ATAGS - select SAMSUNG_WDT_RESET - help - Samsung S5PC100 series based systems - -config ARCH_S5PV210 - bool "Samsung S5PV210/S5PC110" - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_SPARSEMEM_ENABLE - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V7 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select NEED_MACH_MEMORY_H - select SAMSUNG_ATAGS - help - Samsung S5PV210/S5PC110 series based systems - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -952,8 +885,6 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-keystone/Kconfig" -source "arch/arm/mach-kirkwood/Kconfig" - source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-msm/Kconfig" @@ -964,6 +895,8 @@ source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-mediatek/Kconfig" + source "arch/arm/mach-mxs/Kconfig" source "arch/arm/mach-netx/Kconfig" @@ -1005,10 +938,6 @@ source "arch/arm/mach-s3c24xx/Kconfig" source "arch/arm/mach-s3c64xx/Kconfig" -source "arch/arm/mach-s5p64x0/Kconfig" - -source "arch/arm/mach-s5pc100/Kconfig" - source "arch/arm/mach-s5pv210/Kconfig" source "arch/arm/mach-exynos/Kconfig" @@ -1555,7 +1484,8 @@ config ARM_PSCI config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX + default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ + SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI default 392 if ARCH_U8500 default 352 if ARCH_VT8500 @@ -1571,7 +1501,7 @@ source kernel/Kconfig.preempt config HZ_FIXED int - default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ ARCH_S5PV210 || ARCH_EXYNOS4 default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY @@ -2196,7 +2126,6 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK def_bool y diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e43b838bae4b..b11ad54f8d17 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -223,6 +223,14 @@ choice Say Y here if you want kernel low-level debugging support on HI3716 UART. + config DEBUG_HIX5HD2_UART + bool "Hisilicon Hix5hd2 Debug UART" + depends on ARCH_HIX5HD2 + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on Hix5hd2 UART. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -625,6 +633,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -635,6 +644,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -645,6 +655,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -652,8 +663,9 @@ choice by the boot-loader before use. config DEBUG_S3C_UART3 - depends on PLAT_SAMSUNG && ARCH_EXYNOS - select DEBUG_EXYNOS_UART + depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210) + select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -711,6 +723,14 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A1X based platforms on the UART1. + config DEBUG_SUNXI_R_UART + bool "Kernel low-level debugging messages via sunXi R_UART" + depends on MACH_SUN6I || MACH_SUN8I + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Allwinner A31/A23 based platforms on the R_UART. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -945,6 +965,9 @@ config DEBUG_S3C2410_UART config DEBUG_S3C24XX_UART bool +config DEBUG_S5PV210_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS @@ -987,6 +1010,7 @@ config DEBUG_STI_UART config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/efm32.S" if DEBUG_LL_UART_EFM32 @@ -1005,6 +1029,7 @@ config DEBUG_LL_INCLUDE default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART + default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART @@ -1029,7 +1054,7 @@ config DEBUG_UART_8250 def_bool ARCH_DOVE || ARCH_EBSA110 || \ (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ - ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \ + ARCH_IOP33X || ARCH_IXP4XX || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC config DEBUG_UART_PHYS @@ -1039,6 +1064,7 @@ config DEBUG_UART_PHYS default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2 + default 0x01f02800 if DEBUG_SUNXI_R_UART default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC @@ -1085,10 +1111,10 @@ config DEBUG_UART_PHYS default 0xe0000000 if ARCH_SPEAR13XX default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE - default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ + default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART - default 0xf8b00000 if DEBUG_HI3716_UART + default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART default 0xfe800000 if ARCH_IOP32X @@ -1115,6 +1141,7 @@ config DEBUG_UART_VIRT default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 + default 0xf1f02800 if DEBUG_SUNXI_R_UART default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI @@ -1141,7 +1168,7 @@ config DEBUG_UART_VIRT default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe300000 if DEBUG_BCM_KONA_UART default 0xfe800000 if ARCH_IOP32X - default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART + default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 @@ -1152,7 +1179,6 @@ config DEBUG_UART_VIRT default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 - default 0xfed12000 if ARCH_KIRKWOOD default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6721fab13734..0ce9d0f71f2a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -127,6 +127,9 @@ CHECKFLAGS += -D__arm__ #Default value head-y := arch/arm/kernel/head$(MMUEXT).o + +# Text offset. This list is sorted numerically by address in order to +# provide a means to avoid/resolve conflicts in multi-arch kernels. textofs-y := 0x00008000 textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 # We don't want the htc bootloader to corrupt kernel during resume @@ -156,14 +159,13 @@ machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank -machine-$(CONFIG_ARCH_HI3xxx) += hisi +machine-$(CONFIG_ARCH_HISI) += hisi machine-$(CONFIG_ARCH_INTEGRATOR) += integrator machine-$(CONFIG_ARCH_IOP13XX) += iop13xx machine-$(CONFIG_ARCH_IOP32X) += iop32x machine-$(CONFIG_ARCH_IOP33X) += iop33x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx machine-$(CONFIG_ARCH_KEYSTONE) += keystone -machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood machine-$(CONFIG_ARCH_KS8695) += ks8695 machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MMP) += mmp @@ -172,6 +174,7 @@ machine-$(CONFIG_ARCH_MSM) += msm machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx +machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MXS) += mxs machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik @@ -187,8 +190,6 @@ machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx -machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 -machine-$(CONFIG_ARCH_S5PC100) += s5pc100 machine-$(CONFIG_ARCH_S5PV210) += s5pv210 machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_SHMOBILE) += shmobile @@ -212,11 +213,11 @@ machine-$(CONFIG_PLAT_SPEAR) += spear plat-$(CONFIG_ARCH_EXYNOS) += samsung plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_S3C64XX) += samsung +plat-$(CONFIG_ARCH_S5PV210) += samsung plat-$(CONFIG_PLAT_IOP) += iop plat-$(CONFIG_PLAT_ORION) += orion plat-$(CONFIG_PLAT_PXA) += pxa plat-$(CONFIG_PLAT_S3C24XX) += samsung -plat-$(CONFIG_PLAT_S5P) += samsung plat-$(CONFIG_PLAT_VERSATILE) += versatile ifeq ($(CONFIG_ARCH_EBSA110),y) @@ -240,7 +241,7 @@ MACHINE := endif machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) -platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y)) +platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y) ifeq ($(KBUILD_SRC),) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 68c918362b79..76a50ecae1c3 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -81,7 +81,7 @@ ZTEXTADDR := 0 ZBSSADDR := ALIGN(8) endif -SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ +CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo @@ -199,8 +199,5 @@ CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) -$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG) - @sed "$(SEDFLAGS)" < $< > $@ - $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 3a8b32df6b31..413fd94b5301 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,11 @@ start: THUMB( adr r12, BSYM(1f) ) THUMB( bx r12 ) - .word 0x016f2818 @ Magic numbers to help the loader - .word start @ absolute load/run zImage address - .word _edata @ zImage end address + .word _magic_sig @ Magic numbers to help the loader + .word _magic_start @ absolute load/run zImage address + .word _magic_end @ zImage end address + .word 0x04030201 @ endianness flag + THUMB( .thumb ) 1: ARM_BE8( setend be ) @ go BE8 if compiled for BE8 diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.S index 4919f2ac8b89..2b60b843ac5e 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -1,12 +1,20 @@ /* - * linux/arch/arm/boot/compressed/vmlinux.lds.in - * * Copyright (C) 2000 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \ + (((x) >> 8) & 0x0000ff00) | \ + (((x) << 8) & 0x00ff0000) | \ + (((x) << 24) & 0xff000000) ) +#else +#define ZIMAGE_MAGIC(x) (x) +#endif + OUTPUT_ARCH(arm) ENTRY(_start) SECTIONS @@ -57,6 +65,10 @@ SECTIONS .pad : { BYTE(0); . = ALIGN(8); } _edata = .; + _magic_sig = ZIMAGE_MAGIC(0x016f2818); + _magic_start = ZIMAGE_MAGIC(_start); + _magic_end = ZIMAGE_MAGIC(_edata); + . = BSS_START; __bss_start = .; .bss : { *(.bss) } @@ -73,4 +85,3 @@ SECTIONS .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } } - diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0afe09a6bf51..b8c5cd3ddeb9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb +dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ @@ -94,8 +95,7 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \ k2l-evm.dtb \ k2e-evm.dtb -kirkwood := \ - kirkwood-b3.dtb \ +dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-cloudbox.dtb \ kirkwood-d2net.dtb \ kirkwood-db-88f6281.dtb \ @@ -157,8 +157,6 @@ kirkwood := \ kirkwood-ts219-6282.dtb \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) -dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb @@ -354,13 +352,17 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb +dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \ + s5pv210-goni.dtb \ + s5pv210-smdkc110.dtb \ + s5pv210-smdkv210.dtb \ + s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen.dtb \ - r8a7779-marzen-reference.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ sh73a0-kzm9g.dtb \ @@ -372,7 +374,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ - r8a7790-lager.dtb + r8a7790-lager.dtb \ + r8a7779-marzen.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 4a4e02d0ce9e..3a0a161342ba 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -347,6 +347,15 @@ status = "disabled"; }; + mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + }; + timer1: timer@44e31000 { compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 8d3c16304636..9b3d2ba82f13 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -168,9 +168,6 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; - ti,mbox-names = "wkup_m3"; - ti,mbox-data = <0 0 0 0>; - status = "disabled"; }; timer1: timer@44e31000 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 6563b983a127..97f603c4483d 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -415,6 +415,123 @@ status = "disabled"; }; + mailbox1: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + ti,hwmods = "mailbox1"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + status = "disabled"; + }; + + mailbox2: mailbox@4883a000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883a000 0x200>; + ti,hwmods = "mailbox2"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox3: mailbox@4883c000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883c000 0x200>; + ti,hwmods = "mailbox3"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox4: mailbox@4883e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883e000 0x200>; + ti,hwmods = "mailbox4"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox5: mailbox@48840000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48840000 0x200>; + ti,hwmods = "mailbox5"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox6: mailbox@48842000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48842000 0x200>; + ti,hwmods = "mailbox6"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox7: mailbox@48844000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48844000 0x200>; + ti,hwmods = "mailbox7"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox8: mailbox@48846000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48846000 0x200>; + ti,hwmods = "mailbox8"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox9: mailbox@4885e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4885e000 0x200>; + ti,hwmods = "mailbox9"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox10: mailbox@48860000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48860000 0x200>; + ti,hwmods = "mailbox10"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox11: mailbox@48862000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48862000 0x200>; + ti,hwmods = "mailbox11"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox12: mailbox@48864000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48864000 0x200>; + ti,hwmods = "mailbox12"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox13: mailbox@48802000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48802000 0x200>; + ti,hwmods = "mailbox13"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index e37985fa10e2..00eeed3721b6 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -31,11 +31,13 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <533000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <533000000>; }; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index abd6eb31b2c2..1d52de6370d5 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -39,6 +39,8 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + serial0 = &serial_0; + serial1 = &serial_1; }; cpus { @@ -268,10 +270,11 @@ }; adc: adc@126C0000 { - compatible = "samsung,exynos-adc-v3"; + compatible = "samsung,exynos3250-adc", + "samsung,exynos-adc-v2"; reg = <0x126C0000 0x100>, <0x10020718 0x4>; interrupts = <0 137 0>; - clock-names = "adc", "sclk_tsadc"; + clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; io-channel-ranges; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 08ea6dc9a92f..e0278ecbc816 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -44,6 +44,10 @@ fimc1 = &fimc_1; fimc2 = &fimc_2; fimc3 = &fimc_3; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; }; clock_audss: clock-controller@03810000 { @@ -393,7 +397,7 @@ status = "disabled"; }; - serial@13800000 { + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; interrupts = <0 52 0>; @@ -402,7 +406,7 @@ status = "disabled"; }; - serial@13810000 { + serial_1: serial@13810000 { compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; interrupts = <0 53 0>; @@ -411,7 +415,7 @@ status = "disabled"; }; - serial@13820000 { + serial_2: serial@13820000 { compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; interrupts = <0 54 0>; @@ -420,7 +424,7 @@ status = "disabled"; }; - serial@13830000 { + serial_3: serial@13830000 { compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; interrupts = <0 55 0>; @@ -638,6 +642,7 @@ clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; samsung,power-domain = <&pd_lcd0>; + samsung,sysreg = <&sys_reg>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 636d16684750..676e6e0c8cf3 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -168,6 +168,7 @@ }; spi_2: spi@13940000 { + cs-gpios = <&gpc1 2 0>; status = "okay"; w25x80@0 { @@ -178,7 +179,6 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpc1 2 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index a4f28e8a6f87..807bb5bf91fc 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,16 @@ pinctrl2 = &pinctrl_2; }; + pmu_system_controller: system-controller@10020000 { + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, + <&clock CLK_XUSBXTI>; + #clock-cells = <1>; + }; + sysram@02020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 77878447b312..11967f4561e0 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -589,6 +589,7 @@ spi_1: spi@13930000 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 0>; status = "okay"; s5c73m3_spi: s5c73m3 { @@ -596,7 +597,6 @@ spi-max-frequency = <50000000>; reg = <0>; controller-data { - cs-gpio = <&gpb 5 0>; samsung,spi-feedback-delay = <2>; }; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 95cdfb9e7d59..861bb919f6d3 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -133,6 +133,13 @@ pmu_system_controller: system-controller@10020000 { compatible = "samsung,exynos4212-pmu", "syscon"; + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, + <&clock CLK_XUSBXTI>; + #clock-cells = <1>; }; g2d@10800000 { diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 79d0608d6dcc..a0cc0b6f8f96 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -18,6 +18,13 @@ / { interrupt-parent = <&gic>; + aliases { + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -50,25 +57,25 @@ interrupts = <1 9 0xf04>; }; - serial@12C00000 { + serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <0 51 0>; }; - serial@12C10000 { + serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; interrupts = <0 52 0>; }; - serial@12C20000 { + serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; interrupts = <0 53 0>; }; - serial@12C30000 { + serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <0 54 0>; @@ -87,6 +94,7 @@ reg = <0x14400000 0x40000>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <18 4>, <18 5>, <18 6>; + samsung,sysreg = <&sysreg_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index aaa055ac0fe3..b4b35adae565 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -318,6 +318,7 @@ }; spi_1: spi@12d30000 { + cs-gpios = <&gpa2 5 0>; status = "okay"; w25q80bw@0 { @@ -328,7 +329,6 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpa2 5 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 834fb5a5306f..492e1eff37bd 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -191,6 +191,9 @@ pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5250-pmu", "syscon"; reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; }; sysreg_system_controller: syscon@10050000 { diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 4f2fabeecb0e..36da38e29000 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -21,6 +21,10 @@ pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; }; cpus { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 790d4886d7b5..731eefd23fa9 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -20,6 +20,12 @@ compatible = "samsung,exynos5410", "samsung,exynos5"; interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index b69de2661011..95ec37dff3e8 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -515,6 +515,26 @@ phy-names = "dp"; }; + mipi_phy: video-phy@10040714 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10040714 12>; + #phy-cells = <1>; + }; + + dsi@14500000 { + compatible = "samsung,exynos5410-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <0 82 0>; + samsung,power-domain = <&disp_pd>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + fimd: fimd@14400000 { clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; @@ -721,6 +741,9 @@ pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5420-pmu", "syscon"; reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; }; sysreg_system_controller: syscon@10050000 { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index ae3a17c791f6..8f3373cd7b87 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -18,6 +18,8 @@ interrupt-parent = <&gic>; aliases { + serial0 = &serial_0; + serial1 = &serial_1; spi0 = &spi_0; tmuctrl0 = &tmuctrl_0; tmuctrl1 = &tmuctrl_1; @@ -102,7 +104,7 @@ >; }; - serial@B0000 { + serial_0: serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; @@ -110,7 +112,7 @@ clock-names = "uart", "clk_uart_baud0"; }; - serial@C0000 { + serial_1: serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index ab1116d086be..6cbb62e5c6a9 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -33,6 +33,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "hisilicon,hi3620-smp"; cpu@0 { device_type = "cpu"; @@ -73,7 +74,7 @@ L2: l2-cache { compatible = "arm,pl310-cache"; - reg = <0xfc10000 0x100000>; + reg = <0x100000 0x100000>; interrupts = <0 15 4>; cache-unified; cache-level = <2>; diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts new file mode 100644 index 000000000000..05b44c272c9a --- /dev/null +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +#include "hisi-x5hd2.dtsi" + +/ { + model = "Hisilicon HIX5HD2 Development Board"; + compatible = "hisilicon,hix5hd2"; + + chosen { + bootargs = "console=ttyAMA0,115200 earlyprintk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "hisilicon,hix5hd2-smp"; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; +}; + +&timer0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi new file mode 100644 index 000000000000..f85ba2924ff7 --- /dev/null +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -0,0 +1,170 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/hix5hd2-clock.h> + +/ { + aliases { + serial0 = &uart0; + }; + + gic: interrupt-controller@f8a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + /* gic dist base, gic cpu base */ + reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0 0xf8000000 0x8000000>; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + timer0: timer@00002000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00002000 0x1000>; + /* timer00 & timer01 */ + interrupts = <0 24 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer1: timer@00a29000 { + /* + * Only used in NORMAL state, not available ins + * SLOW or DOZE state. + * The rate is fixed in 24MHz. + */ + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a29000 0x1000>; + /* timer10 & timer11 */ + interrupts = <0 25 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer2: timer@00a2a000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a2a000 0x1000>; + /* timer20 & timer21 */ + interrupts = <0 26 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer3: timer@00a2b000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a2b000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 27 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer4: timer@00a81000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a81000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 28 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + uart0: uart@00b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b00000 0x1000>; + interrupts = <0 49 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: uart@00006000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00006000 0x1000>; + interrupts = <0 50 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@00b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b02000 0x1000>; + interrupts = <0 51 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@00b03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b03000 0x1000>; + interrupts = <0 52 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart4: uart@00b04000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb04000 0x1000>; + interrupts = <0 53 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + + local_timer@00a00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x00a00600 0x20>; + interrupts = <1 13 0xf01>; + }; + + l2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x00a10000 0x100000>; + interrupts = <0 15 4>; + cache-unified; + cache-level = <2>; + }; + + sysctrl: system-controller@00000000 { + compatible = "hisilicon,sysctrl"; + reg = <0x00000000 0x1000>; + reboot-offset = <0x4>; + }; + + cpuctrl@00a22000 { + compatible = "hisilicon,cpuctrl"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00a22000 0x2000>; + ranges = <0 0x00a22000 0x2000>; + + clock: clock@0 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0 0x2000>; + #clock-cells = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h index f5387b4de577..597bb5f74dcc 100644 --- a/arch/arm/boot/dts/imx27-pinfunc.h +++ b/arch/arm/boot/dts/imx27-pinfunc.h @@ -101,14 +101,6 @@ #define MX27_PAD_CONTRAST__GPIO1_30 0x1e 0x032 #define MX27_PAD_OE_ACD__OE_ACD 0x1f 0x004 #define MX27_PAD_OE_ACD__GPIO1_31 0x1f 0x032 -#define MX27_PAD_UNUSED0__UNUSED0 0x20 0x004 -#define MX27_PAD_UNUSED0__GPIO2_0 0x20 0x032 -#define MX27_PAD_UNUSED1__UNUSED1 0x21 0x004 -#define MX27_PAD_UNUSED1__GPIO2_1 0x21 0x032 -#define MX27_PAD_UNUSED2__UNUSED2 0x22 0x004 -#define MX27_PAD_UNUSED2__GPIO2_2 0x22 0x032 -#define MX27_PAD_UNUSED3__UNUSED3 0x23 0x004 -#define MX27_PAD_UNUSED3__GPIO2_3 0x23 0x032 #define MX27_PAD_SD2_D0__SD2_D0 0x24 0x004 #define MX27_PAD_SD2_D0__MSHC_DATA0 0x24 0x005 #define MX27_PAD_SD2_D0__GPIO2_4 0x24 0x032 @@ -183,16 +175,6 @@ #define MX27_PAD_USBH1_RXDP__USBH1_RXDP 0x3f 0x004 #define MX27_PAD_USBH1_RXDP__UART4_RXD 0x3f 0x001 #define MX27_PAD_USBH1_RXDP__GPIO2_31 0x3f 0x032 -#define MX27_PAD_UNUSED4__UNUSED4 0x40 0x004 -#define MX27_PAD_UNUSED4__GPIO3_0 0x40 0x032 -#define MX27_PAD_UNUSED5__UNUSED5 0x41 0x004 -#define MX27_PAD_UNUSED5__GPIO3_1 0x41 0x032 -#define MX27_PAD_UNUSED6__UNUSED6 0x42 0x004 -#define MX27_PAD_UNUSED6__GPIO3_2 0x42 0x032 -#define MX27_PAD_UNUSED7__UNUSED7 0x43 0x004 -#define MX27_PAD_UNUSED7__GPIO3_3 0x43 0x032 -#define MX27_PAD_UNUSED8__UNUSED8 0x44 0x004 -#define MX27_PAD_UNUSED8__GPIO3_4 0x44 0x032 #define MX27_PAD_I2C2_SDA__I2C2_SDA 0x45 0x004 #define MX27_PAD_I2C2_SDA__GPIO3_5 0x45 0x032 #define MX27_PAD_I2C2_SCL__I2C2_SCL 0x46 0x004 @@ -422,18 +404,6 @@ #define MX27_PAD_USBOTG_CLK__GPIO5_24 0x98 0x032 #define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x99 0x004 #define MX27_PAD_USBOTG_DATA7__GPIO5_25 0x99 0x032 -#define MX27_PAD_UNUSED9__UNUSED9 0x9a 0x004 -#define MX27_PAD_UNUSED9__GPIO5_26 0x9a 0x032 -#define MX27_PAD_UNUSED10__UNUSED10 0x9b 0x004 -#define MX27_PAD_UNUSED10__GPIO5_27 0x9b 0x032 -#define MX27_PAD_UNUSED11__UNUSED11 0x9c 0x004 -#define MX27_PAD_UNUSED11__GPIO5_28 0x9c 0x032 -#define MX27_PAD_UNUSED12__UNUSED12 0x9d 0x004 -#define MX27_PAD_UNUSED12__GPIO5_29 0x9d 0x032 -#define MX27_PAD_UNUSED13__UNUSED13 0x9e 0x004 -#define MX27_PAD_UNUSED13__GPIO5_30 0x9e 0x032 -#define MX27_PAD_UNUSED14__UNUSED14 0x9f 0x004 -#define MX27_PAD_UNUSED14__GPIO5_31 0x9f 0x032 #define MX27_PAD_NFRB__NFRB 0xa0 0x000 #define MX27_PAD_NFRB__ETMTRACEPKT3 0xa0 0x005 #define MX27_PAD_NFRB__GPIO6_0 0xa0 0x032 @@ -506,21 +476,5 @@ #define MX27_PAD_ATA_DATA15__ETMTRACEPKT4 0xb7 0x005 #define MX27_PAD_ATA_DATA15__FEC_TX_EN 0xb7 0x006 #define MX27_PAD_ATA_DATA15__GPIO6_23 0xb7 0x032 -#define MX27_PAD_UNUSED15__UNUSED15 0xb8 0x004 -#define MX27_PAD_UNUSED15__GPIO6_24 0xb8 0x032 -#define MX27_PAD_UNUSED16__UNUSED16 0xb9 0x004 -#define MX27_PAD_UNUSED16__GPIO6_25 0xb9 0x032 -#define MX27_PAD_UNUSED17__UNUSED17 0xba 0x004 -#define MX27_PAD_UNUSED17__GPIO6_26 0xba 0x032 -#define MX27_PAD_UNUSED18__UNUSED18 0xbb 0x004 -#define MX27_PAD_UNUSED18__GPIO6_27 0xbb 0x032 -#define MX27_PAD_UNUSED19__UNUSED19 0xbc 0x004 -#define MX27_PAD_UNUSED19__GPIO6_28 0xbc 0x032 -#define MX27_PAD_UNUSED20__UNUSED20 0xbd 0x004 -#define MX27_PAD_UNUSED20__GPIO6_29 0xbd 0x032 -#define MX27_PAD_UNUSED21__UNUSED21 0xbe 0x004 -#define MX27_PAD_UNUSED21__GPIO6_30 0xbe 0x032 -#define MX27_PAD_UNUSED22__UNUSED22 0xbf 0x004 -#define MX27_PAD_UNUSED22__GPIO6_31 0xbf 0x032 #endif /* __DTS_IMX27_PINFUNC_H */ diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index b10e6351da53..cf06e32ee108 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -8,6 +8,7 @@ / { model = "ARM Integrator/AP"; compatible = "arm,integrator-ap"; + dma-ranges = <0x80000000 0x0 0x80000000>; aliases { arm,timer-primary = &timer2; diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/boot/dts/mt6589-aquaris5.dts index 201842a3769e..443b4467de15 100644 --- a/arch/arm/mach-s5pv210/include/mach/dma.h +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -1,6 +1,6 @@ /* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger <matthias.bgg@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,16 +11,15 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __MACH_DMA_H -#define __MACH_DMA_H +/dts-v1/; +#include "mt6589.dtsi" -/* This platform uses the common DMA API driver for PL330 */ -#include <plat/dma-pl330.h> +/ { + model = "bq Aquaris5"; -#endif /* __MACH_DMA_H */ + memory { + reg = <0x80000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi new file mode 100644 index 000000000000..d0297a051549 --- /dev/null +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger <matthias.bgg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "mediatek,mt6589"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + timer: timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + gic: interrupt-controller@10212000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x10211000 0x1000>, + <0x10212000 0x1000>, + <0x10214000 0x2000>, + <0x10216000 0x2000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 2ad3e3b29411..9be3c1266378 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -157,6 +157,8 @@ interrupts = <26>, <34>; interrupt-names = "dsp", "iva"; ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <6>; }; timer1: timer@48028000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index f9ab99d5c951..1a00f15d9096 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -247,6 +247,8 @@ reg = <0x48094000 0x200>; interrupts = <26>; ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <6>; }; timer1: timer@49018000 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 1fe45d1f75ec..b15f1a77d684 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -353,7 +353,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-n900"; ti,use_poweroff; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index b2891a9a6975..575a49bf968d 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -332,6 +332,8 @@ ti,hwmods = "mailbox"; reg = <0x48094000 0x200>; interrupts = <26>; + ti,mbox-num-users = <2>; + ti,mbox-num-fifos = <2>; }; mcspi1: spi@48098000 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7e26d222bfe3..69408b53200d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -649,6 +649,15 @@ }; }; + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + }; + timer1: timer@4a318000 { compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index a4ed54988866..fc8df1739f39 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -640,6 +640,8 @@ reg = <0x4a0f4000 0x200>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; }; timer1: timer@4ae18000 { @@ -985,6 +987,66 @@ dma-names = "audio_tx"; }; }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v2"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1250000 0 0x4 0 0x02000000 0x01F00000 + >; + }; + + abb_mm: regulator-abb-mm { + compatible = "ti,abb-v2"; + regulator-name = "abb_mm"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0x0 0 0x02000000 0x01F00000 + 1120000 0 0x4 0 0x02000000 0x01F00000 + >; + }; }; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index f50fbc8f3bd9..bdee22541189 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -144,6 +144,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <400000000>; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts deleted file mode 100644 index b27c6373ff4d..000000000000 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Reference Device Tree Source for the Marzen board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7779.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "marzen"; - compatible = "renesas,marzen-reference", "renesas,r8a7779"; - - chosen { - bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw"; - }; - - memory { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - - fixedregulator3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - lan0@18000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x18000000 0x100>; - pinctrl-0 = <&lan0_pins>; - pinctrl-names = "default"; - - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - smsc,irq-push-pull; - reg-io-width = <4>; - vddvario-supply = <&fixedregulator3v3>; - vdd33a-supply = <&fixedregulator3v3>; - }; - - leds { - compatible = "gpio-leds"; - led2 { - gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; - }; - led3 { - gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; - }; - led4 { - gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&irqpin0 { - status = "okay"; -}; - -&pfc { - pinctrl-0 = <&scif2_pins &scif4_pins>; - pinctrl-names = "default"; - - lan0_pins: lan0 { - intc { - renesas,groups = "intc_irq1_b"; - renesas,function = "intc"; - }; - lbsc { - renesas,groups = "lbsc_ex_cs0"; - renesas,function = "lbsc"; - }; - }; - - scif2_pins: serial2 { - renesas,groups = "scif2_data_c"; - renesas,function = "scif2"; - }; - - scif4_pins: serial4 { - renesas,groups = "scif4_data"; - renesas,function = "scif4"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - hspi0_pins: hspi0 { - renesas,groups = "hspi0"; - renesas,function = "hspi0"; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <4>; - status = "okay"; -}; - -&hspi0 { - pinctrl-0 = <&hspi0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index ee2338838b3f..5745555df943 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -11,11 +11,18 @@ /dts-v1/; #include "r8a7779.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "marzen"; compatible = "renesas,marzen", "renesas,r8a7779"; + aliases { + serial2 = &scif2; + serial4 = &scif4; + }; + chosen { bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on"; }; @@ -24,4 +31,111 @@ device_type = "memory"; reg = <0x60000000 0x40000000>; }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + pinctrl-0 = <&lan0_pins>; + pinctrl-names = "default"; + + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; + + leds { + compatible = "gpio-leds"; + led2 { + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + led3 { + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + led4 { + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&irqpin0 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <31250000>; +}; + +&pfc { + lan0_pins: lan0 { + intc { + renesas,groups = "intc_irq1_b"; + renesas,function = "intc"; + }; + lbsc { + renesas,groups = "lbsc_ex_cs0"; + renesas,function = "lbsc"; + }; + }; + + scif2_pins: serial2 { + renesas,groups = "scif2_data_c"; + renesas,function = "scif2"; + }; + + scif4_pins: serial4 { + renesas,groups = "scif4_data"; + renesas,function = "scif4"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0"; + renesas,function = "hspi0"; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif4 { + pinctrl-0 = <&scif4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 13bf08ac6011..58d0d952d60e 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/r8a7779-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -25,21 +26,25 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <1000000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <1000000000>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clock-frequency = <1000000000>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clock-frequency = <1000000000>; }; }; @@ -157,6 +162,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C0>; status = "disabled"; }; @@ -166,6 +172,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C1>; status = "disabled"; }; @@ -175,6 +182,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C2>; status = "disabled"; }; @@ -184,6 +192,67 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C3>; + status = "disabled"; + }; + + scif0: serial@ffe40000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe40000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@ffe41000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe41000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@ffe42000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe42000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@ffe43000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe43000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@ffe44000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe44000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@ffe45000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe45000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -201,12 +270,14 @@ compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7779_CLK_SATA>; }; sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -216,6 +287,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -225,6 +297,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -234,6 +307,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -245,6 +319,7 @@ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; @@ -254,6 +329,7 @@ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; @@ -263,6 +339,150 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: clocks@ffc80000 { + compatible = "renesas,r8a7779-cpg-clocks"; + reg = <0xffc80000 0x30>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "plla", "z", "zs", "s", + "s1", "p", "b", "out"; + }; + + /* Fixed factor clocks */ + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + s3_clk: s3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "s3"; + }; + s4_clk: s4_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + clock-output-names = "s4"; + }; + g_clk: g_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "g"; + }; + + /* Gate clocks */ + mstp0_clks: clocks@ffc80030 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80030 4>; + clocks = <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_HSPI R8A7779_CLK_TMU2 + R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 + R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 + R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 + R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 + R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 + R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 + R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + >; + clock-output-names = + "hspi", "tmu2", "tmu1", "tmu0", "hscif1", + "hscif0", "scif5", "scif4", "scif3", "scif2", + "scif1", "scif0", "i2c3", "i2c2", "i2c1", + "i2c0"; + }; + mstp1_clks: clocks@ffc80034 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80034 4>, <0xffc80044 4>; + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_USB01 R8A7779_CLK_USB2 + R8A7779_CLK_DU R8A7779_CLK_VIN2 + R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 + R8A7779_CLK_ETHER R8A7779_CLK_SATA + R8A7779_CLK_PCIE R8A7779_CLK_VIN3 + >; + clock-output-names = + "usb01", "usb2", + "du", "vin2", + "vin1", "vin0", + "ether", "sata", + "pcie", "vin3"; + }; + mstp3_clks: clocks@ffc8003c { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc8003c 4>; + clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, + <&s4_clk>, <&s4_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 + R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 + R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 + >; + clock-output-names = + "sdhi3", "sdhi2", "sdhi1", "sdhi0", + "mmc1", "mmc0"; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6e9a556e1509..0d82a4b3c650 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -583,9 +583,9 @@ #clock-cells = <0>; clock-output-names = "sd1"; }; - sd2_clk: sd3_clk@e615007c { + sd2_clk: sd3_clk@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; - reg = <0 0xe615007c 0 4>; + reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-output-names = "sd2"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 955e4a4f8c31..30b8f7e47454 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -16,6 +16,10 @@ model = "Samsung S3C2416 SoC"; compatible = "samsung,s3c2416"; + aliases { + serial3 = &uart3; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -68,7 +72,7 @@ <&clocks SCLK_UART>; }; - serial@5000C000 { + uart3: serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index 2d1d7dc9418a..5ed43b857cc4 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -16,6 +16,9 @@ aliases { pinctrl0 = &pinctrl_0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; }; intc:interrupt-controller@4a000000 { @@ -46,21 +49,21 @@ #pwm-cells = <4>; }; - serial@50000000 { + uart0: serial@50000000 { compatible = "samsung,s3c2410-uart"; reg = <0x50000000 0x4000>; interrupts = <1 28 0 4>, <1 28 1 4>; status = "disabled"; }; - serial@50004000 { + uart1: serial@50004000 { compatible = "samsung,s3c2410-uart"; reg = <0x50004000 0x4000>; interrupts = <1 23 3 4>, <1 23 4 4>; status = "disabled"; }; - serial@50008000 { + uart2: serial@50008000 { compatible = "samsung,s3c2410-uart"; reg = <0x50008000 0x4000>; interrupts = <1 15 6 4>, <1 15 7 4>; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index 4e3be4d3493d..ff5bdaac987a 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -23,6 +23,10 @@ aliases { i2c0 = &i2c0; pinctrl0 = &pinctrl0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; }; cpus { diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts new file mode 100644 index 000000000000..aa31b84a707a --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -0,0 +1,392 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Aquila board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Aquila based on S5PC110"; + compatible = "samsung,aquila", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x18000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + status = "okay"; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + pinctrl-names = "default"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>; + pinctrl-names = "default"; + status = "okay"; +}; + +&onenand { + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <0>; + hactive = <800>; + vactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vback-porch = <3>; + vfront-porch = <28>; + vsync-len = <1>; + }; + }; +}; + +&pinctrl0 { + t_flash_detect: t-flash-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts new file mode 100644 index 000000000000..6387c77a6f7b --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -0,0 +1,449 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Goni board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Goni based on S5PC110"; + compatible = "samsung,goni", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <0>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + + tsp_reg: fixed-regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <3>; + gpios = <&gpj1 3 0>; + enable-active-high; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + tsp@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 2>; + + atmel,x-line = <17>; + atmel,y-line = <11>; + atmel,x-size = <800>; + atmel,y-size = <480>; + atmel,burst-length = <0x21>; + atmel,threshold = <0x28>; + atmel,orientation = <1>; + + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + noon010pc30: sensor@30 { + compatible = "siliconfile,noon010pc30"; + reg = <0x30>; + vddio-supply = <&ldo11_reg>; + vdda-supply = <&ldo13_reg>; + vdd_core-supply = <&ldo14_reg>; + + clock-frequency = <16000000>; + clocks = <&clock_cam 0>; + clock-names = "mclk"; + nreset-gpios = <&gpb 2 0>; + nstby-gpios = <&gpb 0 0>; + + port { + noon010pc30_ep: endpoint { + remote-endpoint = <&fimc0_ep>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <1>; + pclk-sample = <1>; + }; + }; + }; +}; + +&camera { + pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>; + pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>; + pinctrl-names = "default", "idle"; + + parallel-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* camera A input */ + port@1 { + reg = <1>; + fimc0_ep: endpoint { + remote-endpoint = <&noon010pc30_ep>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + /* 480x800@55Hz */ + clock-frequency = <23439570>; + hactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vactive = <800>; + vback-porch = <2>; + vfront-porch = <28>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; +}; + +&onenand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi new file mode 100644 index 000000000000..8c714088e3c6 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -0,0 +1,839 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpgi: gpgi { + gpio-controller; + #gpio-cells = <2>; + }; + + mp01: mp01 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp02: mp02 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp03: mp03 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp04: mp04 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp05: mp05 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp06: mp06 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp07: mp07 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + interrupt-controller; + interrupt-parent = <&vic0>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + interrupt-controller; + interrupt-parent = <&vic0>; + interrupts = <8>, <9>, <10>, <11>, + <12>, <13>, <14>, <15>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph2: gph2 { + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph3: gph3 { + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio: uart-audio { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", + "gpi-4", "gpi-5", "gpi-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpd1-4", "gpd1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row0: keypad-row-0 { + samsung,pins = "gph3-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row1: keypad-row-1 { + samsung,pins = "gph3-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row2: keypad-row-2 { + samsung,pins = "gph3-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row3: keypad-row-3 { + samsung,pins = "gph3-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row4: keypad-row-4 { + samsung,pins = "gph3-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row5: keypad-row-5 { + samsung,pins = "gph3-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row6: keypad-row-6 { + samsung,pins = "gph3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row7: keypad-row-7 { + samsung,pins = "gph3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col0: keypad-col-0 { + samsung,pins = "gph2-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col1: keypad-col-1 { + samsung,pins = "gph2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col2: keypad-col-2 { + samsung,pins = "gph2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col3: keypad-col-3 { + samsung,pins = "gph2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col4: keypad-col-4 { + samsung,pins = "gph2-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col5: keypad-col-5 { + samsung,pins = "gph2-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col6: keypad-col-6 { + samsung,pins = "gph2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col7: keypad-col-7 { + samsung,pins = "gph2-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpg0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpg0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpg0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpg0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpg1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpg1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpg1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpg1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpg2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpg2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpg2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpg2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpg3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpg3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpg3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpg3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + eint0: ext-int0 { + samsung,pins = "gph0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gph1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gph1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gph2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gph3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_io: cam-port-a-io { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpe1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpe1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts new file mode 100644 index 000000000000..1eedab7ffe94 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts @@ -0,0 +1,78 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for YIC System SMDC110 board. + * + * NOTE: This file is completely based on original board file for mach-smdkc110 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKC110 based on S5PC110"; + compatible = "yic,smdkc110", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts new file mode 100644 index 000000000000..cb8521899ec8 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -0,0 +1,238 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for YIC System SMDV210 board. + * + * NOTE: This file is completely based on original board file for mach-smdkv210 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKV210 based on S5PV210"; + compatible = "yic,smdkv210", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x40000000>; + }; + + ethernet@18000000 { + compatible = "davicom,dm9000"; + reg = <0xA8000000 0x2 0xA8000002 0x2>; + interrupt-parent = <&gph1>; + interrupts = <1 4>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <8>; + samsung,keypad-num-columns = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_row3>, <&keypad_row4>, <&keypad_row5>, + <&keypad_row6>, <&keypad_row7>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>, + <&keypad_col3>, <&keypad_col4>, <&keypad_col5>, + <&keypad_col6>, <&keypad_col7>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <KEY_1>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <KEY_2>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <KEY_3>; + }; + + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <KEY_4>; + }; + + key_5 { + keypad,row = <0 + >; + keypad,column = <7>; + linux,code = <KEY_5>; + }; + + key_6 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <KEY_A>; + }; + key_7 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <KEY_B>; + }; + + key_8 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <KEY_C>; + }; + + key_9 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <KEY_D>; + }; + + key_10 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <KEY_E>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 800x480@60Hz */ + clock-frequency = <24373920>; + hactive = <800>; + vactive = <480>; + hfront-porch = <8>; + hback-porch = <13>; + hsync-len = <3>; + vback-porch = <7>; + vfront-porch = <5>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; + +&pwm { + samsung,pwm-outputs = <3>; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts new file mode 100644 index 000000000000..622599fd2cfa --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-torbreck.dts @@ -0,0 +1,92 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Torbreck board. + * + * NOTE: This file is completely based on original board file for mach-torbreck + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "aESOP Torbreck based on S5PV210"; + compatible = "aesop,torbreck", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi new file mode 100644 index 000000000000..8344a0ee2b86 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -0,0 +1,633 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/s5pv210.h> +#include <dt-bindings/clock/s5pv210-audss.h> + +/ { + aliases { + csis0 = &csis0; + fimc0 = &fimc0; + fimc1 = &fimc1; + fimc2 = &fimc2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2s0 = &i2s0; + i2s1 = &i2s1; + i2s2 = &i2s2; + pinctrl0 = &pinctrl0; + spi0 = &spi0; + spi1 = &spi1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + external-clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + xxti: oscillator@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: oscillator@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + }; + + onenand: onenand@b0000000 { + compatible = "samsung,s5pv210-onenand"; + reg = <0xb0600000 0x2000>, + <0xb0000000 0x20000>, + <0xb0040000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <31>; + clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; + clock-names = "bus", "onenand"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + chipid@e0000000 { + compatible = "samsung,s5pv210-chipid"; + reg = <0xe0000000 0x1000>; + }; + + clocks: clock-controller@e0100000 { + compatible = "samsung,s5pv210-clock", "simple-bus"; + reg = <0xe0100000 0x10000>; + clock-names = "xxti", "xusbxti"; + clocks = <&xxti>, <&xusbxti>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmu_syscon: syscon@e0108000 { + compatible = "samsung-s5pv210-pmu", "syscon"; + reg = <0xe0108000 0x8000>; + }; + }; + + pinctrl0: pinctrl@e0200000 { + compatible = "samsung,s5pv210-pinctrl"; + reg = <0xe0200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <30>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupts = <16>; + interrupt-parent = <&vic0>; + }; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + pdma0: dma@e0900000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0900000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <19>; + clocks = <&clocks CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: dma@e0a00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0a00000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <20>; + clocks = <&clocks CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + spi0: spi@e1300000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1300000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <15>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@e1400000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1400000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <16>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + keypad: keypad@e1600000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0xe1600000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <25>; + clocks = <&clocks CLK_KEYIF>; + clock-names = "keypad"; + status = "disabled"; + }; + + i2c0: i2c@e1800000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <14>; + clocks = <&clocks CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e1a00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1a00000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <19>; + clocks = <&clocks CLK_I2C2>; + clock-names = "i2c"; + pinctrl-0 = <&i2c2_bus>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + audio-subsystem { + compatible = "samsung,s5pv210-audss", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clk_audss: clock-controller@eee10000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xeee10000 0x1000>; + clock-names = "hclk", "xxti", + "fout_epll", + "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + #clock-cells = <1>; + }; + + i2s0: i2s@eee30000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0xeee30000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <16>; + dma-names = "rx", "tx", "tx-sec"; + dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + clock-names = "iis", + "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, + <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + samsung,idma-addr = <0xc0010000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + }; + + i2s1: i2s@e2100000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2100000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <17>; + dma-names = "rx", "tx"; + dmas = <&pdma1 12>, <&pdma1 13>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2: i2s@e2a00000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2a00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <18>; + dma-names = "rx", "tx"; + dmas = <&pdma1 14>, <&pdma1 15>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@e2500000 { + compatible = "samsung,s5pc100-pwm"; + reg = <0xe2500000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <21>, <22>, <23>, <24>, <25>; + clock-names = "timers"; + clocks = <&clocks CLK_PWM>; + #pwm-cells = <3>; + }; + + watchdog: watchdog@e2700000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0xe2700000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <26>; + clock-names = "watchdog"; + clocks = <&clocks CLK_WDT>; + }; + + rtc: rtc@e2800000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0xe2800000 0x100>; + interrupt-parent = <&vic0>; + interrupts = <28>, <29>; + clocks = <&clocks CLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + uart0: serial@e2900000 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900000 0x400>; + interrupt-parent = <&vic1>; + interrupts = <10>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>, + <&clocks SCLK_UART0>; + status = "disabled"; + }; + + uart1: serial@e2900400 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900400 0x400>; + interrupt-parent = <&vic1>; + interrupts = <11>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>, + <&clocks SCLK_UART1>; + status = "disabled"; + }; + + uart2: serial@e2900800 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900800 0x400>; + interrupt-parent = <&vic1>; + interrupts = <12>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>, + <&clocks SCLK_UART2>; + status = "disabled"; + }; + + uart3: serial@e2900c00 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900c00 0x400>; + interrupt-parent = <&vic1>; + interrupts = <13>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>, + <&clocks SCLK_UART3>; + status = "disabled"; + }; + + sdhci0: sdhci@eb000000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb000000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>, + <&clocks SCLK_MMC0>; + status = "disabled"; + }; + + sdhci1: sdhci@eb100000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb100000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>, + <&clocks SCLK_MMC1>; + status = "disabled"; + }; + + sdhci2: sdhci@eb200000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb200000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <28>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>, + <&clocks SCLK_MMC2>; + status = "disabled"; + }; + + sdhci3: sdhci@eb300000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb300000 0x100000>; + interrupt-parent = <&vic3>; + interrupts = <2>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3"; + clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>, + <&clocks SCLK_MMC3>; + status = "disabled"; + }; + + hsotg: hsotg@ec000000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0xec000000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clocks = <&clocks CLK_USB_OTG>; + clock-names = "otg"; + phy-names = "usb2-phy"; + phys = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: usbphy@ec100000 { + compatible = "samsung,s5pv210-usb2-phy"; + reg = <0xec100000 0x100>; + samsung,pmureg-phandle = <&pmu_syscon>; + clocks = <&clocks CLK_USB_OTG>, <&xusbxti>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: ehci@ec200000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0xec200000 0x100>; + interrupts = <23>; + interrupt-parent = <&vic1>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + phys = <&usbphy 1>; + }; + }; + + ohci: ohci@ec300000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0xec300000 0x100>; + interrupts = <23>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + phys = <&usbphy 1>; + }; + }; + + mfc: codec@f1700000 { + compatible = "samsung,mfc-v5"; + reg = <0xf1700000 0x10000>; + interrupt-parent = <&vic2>; + interrupts = <14>; + clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>; + clock-names = "sclk_mfc", "mfc"; + }; + + vic0: interrupt-controller@f2000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2000000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@f2100000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2100000 0x1000>; + #interrupt-cells = <1>; + }; + + vic2: interrupt-controller@f2200000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2200000 0x1000>; + #interrupt-cells = <1>; + }; + + vic3: interrupt-controller@f2300000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2300000 0x1000>; + #interrupt-cells = <1>; + }; + + fimd: fimd@f8000000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&vic2>; + reg = <0xf8000000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0>, <1>, <2>; + clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>; + clock-names = "sclk_fimd", "fimd"; + status = "disabled"; + }; + + g2d: g2d@fa000000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0xfa000000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <9>; + clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + }; + + mdma1: mdma@fa200000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfa200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <18>; + clocks = <&clocks CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + i2c1: i2c@fab00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xfab00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <13>; + clocks = <&clocks CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + camera: camera { + compatible = "samsung,fimc", "simple-bus"; + pinctrl-names = "default"; + pinctrl-0 = <>; + clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; + clock-names = "sclk_cam0", "sclk_cam1"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_cam: clock-controller { + #clock-cells = <1>; + }; + + csis0: csis@fa600000 { + compatible = "samsung,s5pv210-csis"; + reg = <0xfa600000 0x4000>; + interrupt-parent = <&vic2>; + interrupts = <29>; + clocks = <&clocks CLK_CSIS>, + <&clocks SCLK_CSIS>; + clock-names = "clk_csis", + "sclk_csis"; + bus-width = <4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + fimc0: fimc@fb200000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb200000 0x1000>; + interrupts = <5>; + interrupt-parent = <&vic2>; + clocks = <&clocks CLK_FIMC0>, + <&clocks SCLK_FIMC0>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc1: fimc@fb300000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <6>; + clocks = <&clocks CLK_FIMC1>, + <&clocks SCLK_FIMC1>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc2: fimc@fb400000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb400000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <7>; + clocks = <&clocks CLK_FIMC2>, + <&clocks SCLK_FIMC2>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + }; + }; +}; + +#include "s5pv210-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index a6cb0508762f..de5ed59fb446 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -74,7 +74,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cdns,pc302-gem", "cdns,gem"; + compatible = "atmel,sama5d3-gem"; reg = <0xf0028000 0x100>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 0a66d8a9457c..4d77ad690ed5 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -486,6 +486,8 @@ clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; status = "disabled"; }; @@ -500,6 +502,8 @@ clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index f557feb997f4..90d8b6c7a205 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -/include/ "ste-nomadik-stn8815.dtsi" +#include "ste-nomadik-stn8815.dtsi" / { model = "Calao Systems USB-S8815"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index d316c955bd5f..dbcf521b017f 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -1,7 +1,9 @@ /* * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC */ -/include/ "skeleton.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" / { #address-cells = <1>; @@ -842,8 +844,7 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - cd-gpios = <&gpio3 15 0x1>; - cd-inverted; + cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 335a1d8047f2..80b8eddb4105 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -672,6 +672,8 @@ <&tegra_car TEGRA114_CLK_PLL_U>, <&tegra_car TEGRA114_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -682,6 +684,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -705,6 +708,8 @@ <&tegra_car TEGRA114_CLK_PLL_U>, <&tegra_car TEGRA114_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 3af46d3bfbd5..03916efd6fa9 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -668,6 +668,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -702,6 +704,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -712,6 +716,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -736,6 +741,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 243d84cdbae8..1908f6937e53 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -645,6 +645,8 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,has-legacy-mode; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; @@ -653,6 +655,7 @@ nvidia,xcvr-setup = <9>; nvidia,xcvr-lsfslew = <1>; nvidia,xcvr-lsrslew = <1>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -676,6 +679,8 @@ <&tegra_car TEGRA20_CLK_PLL_U>, <&tegra_car TEGRA20_CLK_CDEV2>; clock-names = "reg", "pll_u", "ulpi-link"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; status = "disabled"; }; @@ -700,6 +705,8 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 0b1ede940d1f..6b35c29278d7 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -790,6 +790,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -801,6 +803,7 @@ nvidia,xcvr-hsslew = <32>; nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -824,6 +827,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -858,6 +863,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index e01e5a081def..36c771a2d765 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -19,6 +19,41 @@ reg = <0x0 0x08000000>; }; + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + core-module@10000000 { + compatible = "arm,core-module-versatile", "syscon"; + reg = <0x10000000 0x200>; + + /* OSC1 on AB, OSC4 on PB */ + osc1: cm_aux_osc@24M { + #clock-cells = <0>; + compatible = "arm,versatile-cm-auxosc"; + clocks = <&xtal24mhz>; + }; + + /* The timer clock is the 24 MHz oscillator divided to 1MHz */ + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + pclk: pclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + }; + flash@34000000 { compatible = "arm,versatile-flash"; reg = <0x34000000 0x4000000>; @@ -59,6 +94,8 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x10140000 0x1000>; + clear-mask = <0xffffffff>; + valid-mask = <0xffffffff>; }; sic: intc@10003000 { @@ -68,69 +105,93 @@ reg = <0x10003000 0x1000>; interrupt-parent = <&vic>; interrupts = <31>; /* Cascaded to vic */ + clear-mask = <0xffffffff>; + valid-mask = <0xffc203f8>; }; dma@10130000 { compatible = "arm,pl081", "arm,primecell"; reg = <0x10130000 0x1000>; interrupts = <17>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; uart0: uart@101f1000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f1000 0x1000>; interrupts = <12>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart1: uart@101f2000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f2000 0x1000>; interrupts = <13>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart2: uart@101f3000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f3000 0x1000>; interrupts = <14>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; smc@10100000 { compatible = "arm,primecell"; reg = <0x10100000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; mpmc@10110000 { compatible = "arm,primecell"; reg = <0x10110000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; display@10120000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x10120000 0x1000>; interrupts = <16>; + clocks = <&osc1>, <&pclk>; + clock-names = "clcd", "apb_pclk"; }; sctl@101e0000 { compatible = "arm,primecell"; reg = <0x101e0000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; watchdog@101e1000 { compatible = "arm,primecell"; reg = <0x101e1000 0x1000>; interrupts = <0>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; timer@101e2000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x101e2000 0x1000>; interrupts = <4>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; }; timer@101e3000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x101e3000 0x1000>; interrupts = <5>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; }; gpio0: gpio@101e4000 { @@ -141,6 +202,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpio1: gpio@101e5000 { @@ -151,24 +214,32 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; rtc@101e8000 { compatible = "arm,pl030", "arm,primecell"; reg = <0x101e8000 0x1000>; interrupts = <10>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; sci@101f0000 { compatible = "arm,primecell"; reg = <0x101f0000 0x1000>; interrupts = <15>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; ssp@101f4000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x101f4000 0x1000>; interrupts = <11>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; }; fpga { @@ -181,23 +252,31 @@ compatible = "arm,primecell"; reg = <0x4000 0x1000>; interrupts = <24>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; mmc@5000 { - compatible = "arm,primecell"; + compatible = "arm,pl180", "arm,primecell"; reg = < 0x5000 0x1000>; interrupts-extended = <&vic 22 &sic 2>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x6000 0x1000>; interrupt-parent = <&sic>; interrupts = <3>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@7000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x7000 0x1000>; interrupt-parent = <&sic>; interrupts = <4>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; }; }; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 65f657711323..d025048119d3 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -13,6 +13,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpio3: gpio@101e7000 { @@ -23,6 +25,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; fpga { @@ -31,17 +35,23 @@ reg = <0x9000 0x1000>; interrupt-parent = <&sic>; interrupts = <6>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; sci@a000 { compatible = "arm,primecell"; reg = <0xa000 0x1000>; interrupt-parent = <&sic>; interrupts = <5>; + clocks = <&xtal24mhz>; + clock-names = "apb_pclk"; }; mmc@b000 { - compatible = "arm,primecell"; + compatible = "arm,pl180", "arm,primecell"; reg = <0xb000 0x1000>; interrupts-extended = <&vic 23 &sic 2>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; }; }; diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 490f3dced749..6eaddc47c43d 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -58,16 +58,6 @@ static int read_mpidr(void) } /* - * Get a global nanosecond time stamp for tracing. - */ -static s64 get_ns(void) -{ - struct timespec ts; - getnstimeofday(&ts); - return timespec_to_ns(&ts); -} - -/* * bL switcher core code. */ @@ -224,7 +214,7 @@ static int bL_switch_to(unsigned int new_cluster_id) */ local_irq_disable(); local_fiq_disable(); - trace_cpu_migrate_begin(get_ns(), ob_mpidr); + trace_cpu_migrate_begin(ktime_get_real_ns(), ob_mpidr); /* redirect GIC's SGIs to our counterpart */ gic_migrate_target(bL_gic_id[ib_cpu][ib_cluster]); @@ -267,7 +257,7 @@ static int bL_switch_to(unsigned int new_cluster_id) tdev->evtdev->next_event, 1); } - trace_cpu_migrate_finish(get_ns(), ib_mpidr); + trace_cpu_migrate_finish(ktime_get_real_ns(), ib_mpidr); local_fiq_enable(); local_irq_enable(); @@ -558,7 +548,7 @@ int bL_switcher_get_logical_index(u32 mpidr) static void bL_switcher_trace_trigger_cpu(void *__always_unused info) { - trace_cpu_migrate_current(get_ns(), read_mpidr()); + trace_cpu_migrate_current(ktime_get_real_ns(), read_mpidr()); } int bL_switcher_trace_trigger(void) diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index f91136ab447e..3c165fc2dce2 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -12,11 +12,13 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irqflags.h> +#include <linux/cpu_pm.h> #include <asm/mcpm.h> #include <asm/cacheflush.h> #include <asm/idmap.h> #include <asm/cputype.h> +#include <asm/suspend.h> extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; @@ -146,6 +148,56 @@ int mcpm_cpu_powered_up(void) return 0; } +#ifdef CONFIG_ARM_CPU_SUSPEND + +static int __init nocache_trampoline(unsigned long _arg) +{ + void (*cache_disable)(void) = (void *)_arg; + unsigned int mpidr = read_cpuid_mpidr(); + unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + phys_reset_t phys_reset; + + mcpm_set_entry_vector(cpu, cluster, cpu_resume); + setup_mm_for_reboot(); + + __mcpm_cpu_going_down(cpu, cluster); + BUG_ON(!__mcpm_outbound_enter_critical(cpu, cluster)); + cache_disable(); + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + __mcpm_cpu_down(cpu, cluster); + + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + BUG(); +} + +int __init mcpm_loopback(void (*cache_disable)(void)) +{ + int ret; + + /* + * We're going to soft-restart the current CPU through the + * low-level MCPM code by leveraging the suspend/resume + * infrastructure. Let's play it safe by using cpu_pm_enter() + * in case the CPU init code path resets the VFP or similar. + */ + local_irq_disable(); + local_fiq_disable(); + ret = cpu_pm_enter(); + if (!ret) { + ret = cpu_suspend((unsigned long)cache_disable, nocache_trampoline); + cpu_pm_exit(); + } + local_fiq_enable(); + local_irq_enable(); + if (ret) + pr_err("%s returned %d\n", __func__, ret); + return ret; +} + +#endif + struct sync_struct mcpm_sync; /* diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index fd6bff0c5b96..19211324772f 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -233,13 +233,13 @@ static void __init sp804_of_init(struct device_node *np) if (IS_ERR(clk1)) clk1 = NULL; - /* Get the 2nd clock if the timer has 2 timer clocks */ + /* Get the 2nd clock if the timer has 3 timer clocks */ if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) { clk2 = of_clk_get(np, 1); if (IS_ERR(clk2)) { pr_err("sp804: %s clock not found: %d\n", np->name, (int)PTR_ERR(clk2)); - goto err; + clk2 = NULL; } } else clk2 = clk1; diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 4bf72264b175..fbebcbce1e8c 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -27,6 +27,7 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_MOBILE=y CONFIG_ARM_THUMBEE=y +CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_COMPACTION is not set diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 7f52dad97f51..dd18c9e527d6 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -45,7 +45,6 @@ CONFIG_RFKILL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y -CONFIG_SCSI_TGT=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index f70ea2116fec..3332a4231684 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -19,6 +19,7 @@ CONFIG_MACH_DOVE=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_MOBILE=y CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index eb4d204bff47..f3142369f594 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -225,7 +225,6 @@ CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_PLATFORM=y CONFIG_SCSI=y -CONFIG_SCSI_TGT=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m diff --git a/arch/arm/configs/s5p64x0_defconfig b/arch/arm/configs/s5p64x0_defconfig deleted file mode 100644 index ad6b61b0bd11..000000000000 --- a/arch/arm/configs/s5p64x0_defconfig +++ /dev/null @@ -1,68 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P64X0=y -CONFIG_S3C_BOOT_ERROR_RESET=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDK6440=y -CONFIG_MACH_SMDK6450=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_CPU_32v6K=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_FPE_NWFPE=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig deleted file mode 100644 index 41bafc94dd85..000000000000 --- a/arch/arm/configs/s5pc100_defconfig +++ /dev/null @@ -1,49 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5PC100=y -CONFIG_MACH_SMDKC100=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M" -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_EEPROM_AT24=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_SDIO_UART=y -CONFIG_MMC_SDHCI=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index 81cda39860c5..b48fa341648d 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -5,10 +5,14 @@ obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o +obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o +obj-$(CONFIG_CRYPTO_SHA512_ARM_NEON) += sha512-arm-neon.o aes-arm-y := aes-armv4.o aes_glue.o aes-arm-bs-y := aesbs-core.o aesbs-glue.o sha1-arm-y := sha1-armv4-large.o sha1_glue.o +sha1-arm-neon-y := sha1-armv7-neon.o sha1_neon_glue.o +sha512-arm-neon-y := sha512-armv7-neon.o sha512_neon_glue.o quiet_cmd_perl = PERL $@ cmd_perl = $(PERL) $(<) > $(@) diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S index 3a14ea8fe97e..ebb9761fb572 100644 --- a/arch/arm/crypto/aes-armv4.S +++ b/arch/arm/crypto/aes-armv4.S @@ -35,6 +35,7 @@ @ that is being targetted. #include <linux/linkage.h> +#include <asm/assembler.h> .text @@ -648,7 +649,7 @@ _armv4_AES_set_encrypt_key: .Ldone: mov r0,#0 ldmia sp!,{r4-r12,lr} -.Labrt: mov pc,lr +.Labrt: ret lr ENDPROC(private_AES_set_encrypt_key) .align 5 diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c index 4522366da759..15468fbbdea3 100644 --- a/arch/arm/crypto/aesbs-glue.c +++ b/arch/arm/crypto/aesbs-glue.c @@ -137,7 +137,7 @@ static int aesbs_cbc_encrypt(struct blkcipher_desc *desc, dst += AES_BLOCK_SIZE; } while (--blocks); } - err = blkcipher_walk_done(desc, &walk, 0); + err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); } return err; } @@ -158,7 +158,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc, bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr, walk.nbytes, &ctx->dec, walk.iv); kernel_neon_end(); - err = blkcipher_walk_done(desc, &walk, 0); + err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); } while (walk.nbytes) { u32 blocks = walk.nbytes / AES_BLOCK_SIZE; @@ -182,7 +182,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc, dst += AES_BLOCK_SIZE; src += AES_BLOCK_SIZE; } while (--blocks); - err = blkcipher_walk_done(desc, &walk, 0); + err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); } return err; } @@ -268,7 +268,7 @@ static int aesbs_xts_encrypt(struct blkcipher_desc *desc, bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr, walk.nbytes, &ctx->enc, walk.iv); kernel_neon_end(); - err = blkcipher_walk_done(desc, &walk, 0); + err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); } return err; } @@ -292,7 +292,7 @@ static int aesbs_xts_decrypt(struct blkcipher_desc *desc, bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr, walk.nbytes, &ctx->dec, walk.iv); kernel_neon_end(); - err = blkcipher_walk_done(desc, &walk, 0); + err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); } return err; } diff --git a/arch/arm/crypto/sha1-armv7-neon.S b/arch/arm/crypto/sha1-armv7-neon.S new file mode 100644 index 000000000000..50013c0e2864 --- /dev/null +++ b/arch/arm/crypto/sha1-armv7-neon.S @@ -0,0 +1,634 @@ +/* sha1-armv7-neon.S - ARM/NEON accelerated SHA-1 transform function + * + * Copyright © 2013-2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/linkage.h> + + +.syntax unified +.code 32 +.fpu neon + +.text + + +/* Context structure */ + +#define state_h0 0 +#define state_h1 4 +#define state_h2 8 +#define state_h3 12 +#define state_h4 16 + + +/* Constants */ + +#define K1 0x5A827999 +#define K2 0x6ED9EBA1 +#define K3 0x8F1BBCDC +#define K4 0xCA62C1D6 +.align 4 +.LK_VEC: +.LK1: .long K1, K1, K1, K1 +.LK2: .long K2, K2, K2, K2 +.LK3: .long K3, K3, K3, K3 +.LK4: .long K4, K4, K4, K4 + + +/* Register macros */ + +#define RSTATE r0 +#define RDATA r1 +#define RNBLKS r2 +#define ROLDSTACK r3 +#define RWK lr + +#define _a r4 +#define _b r5 +#define _c r6 +#define _d r7 +#define _e r8 + +#define RT0 r9 +#define RT1 r10 +#define RT2 r11 +#define RT3 r12 + +#define W0 q0 +#define W1 q1 +#define W2 q2 +#define W3 q3 +#define W4 q4 +#define W5 q5 +#define W6 q6 +#define W7 q7 + +#define tmp0 q8 +#define tmp1 q9 +#define tmp2 q10 +#define tmp3 q11 + +#define qK1 q12 +#define qK2 q13 +#define qK3 q14 +#define qK4 q15 + + +/* Round function macros. */ + +#define WK_offs(i) (((i) & 15) * 4) + +#define _R_F1(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + ldr RT3, [sp, WK_offs(i)]; \ + pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + bic RT0, d, b; \ + add e, e, a, ror #(32 - 5); \ + and RT1, c, b; \ + pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add RT0, RT0, RT3; \ + add e, e, RT1; \ + ror b, #(32 - 30); \ + pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add e, e, RT0; + +#define _R_F2(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + ldr RT3, [sp, WK_offs(i)]; \ + pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + eor RT0, d, b; \ + add e, e, a, ror #(32 - 5); \ + eor RT0, RT0, c; \ + pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add e, e, RT3; \ + ror b, #(32 - 30); \ + pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add e, e, RT0; \ + +#define _R_F3(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + ldr RT3, [sp, WK_offs(i)]; \ + pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + eor RT0, b, c; \ + and RT1, b, c; \ + add e, e, a, ror #(32 - 5); \ + pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + and RT0, RT0, d; \ + add RT1, RT1, RT3; \ + add e, e, RT0; \ + ror b, #(32 - 30); \ + pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add e, e, RT1; + +#define _R_F4(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + _R_F2(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) + +#define _R(a,b,c,d,e,f,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + _R_##f(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) + +#define R(a,b,c,d,e,f,i) \ + _R_##f(a,b,c,d,e,i,dummy,dummy,dummy,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) + +#define dummy(...) + + +/* Input expansion macros. */ + +/********* Precalc macros for rounds 0-15 *************************************/ + +#define W_PRECALC_00_15() \ + add RWK, sp, #(WK_offs(0)); \ + \ + vld1.32 {tmp0, tmp1}, [RDATA]!; \ + vrev32.8 W0, tmp0; /* big => little */ \ + vld1.32 {tmp2, tmp3}, [RDATA]!; \ + vadd.u32 tmp0, W0, curK; \ + vrev32.8 W7, tmp1; /* big => little */ \ + vrev32.8 W6, tmp2; /* big => little */ \ + vadd.u32 tmp1, W7, curK; \ + vrev32.8 W5, tmp3; /* big => little */ \ + vadd.u32 tmp2, W6, curK; \ + vst1.32 {tmp0, tmp1}, [RWK]!; \ + vadd.u32 tmp3, W5, curK; \ + vst1.32 {tmp2, tmp3}, [RWK]; \ + +#define WPRECALC_00_15_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vld1.32 {tmp0, tmp1}, [RDATA]!; \ + +#define WPRECALC_00_15_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + add RWK, sp, #(WK_offs(0)); \ + +#define WPRECALC_00_15_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vrev32.8 W0, tmp0; /* big => little */ \ + +#define WPRECALC_00_15_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vld1.32 {tmp2, tmp3}, [RDATA]!; \ + +#define WPRECALC_00_15_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp0, W0, curK; \ + +#define WPRECALC_00_15_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vrev32.8 W7, tmp1; /* big => little */ \ + +#define WPRECALC_00_15_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vrev32.8 W6, tmp2; /* big => little */ \ + +#define WPRECALC_00_15_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp1, W7, curK; \ + +#define WPRECALC_00_15_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vrev32.8 W5, tmp3; /* big => little */ \ + +#define WPRECALC_00_15_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp2, W6, curK; \ + +#define WPRECALC_00_15_10(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vst1.32 {tmp0, tmp1}, [RWK]!; \ + +#define WPRECALC_00_15_11(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp3, W5, curK; \ + +#define WPRECALC_00_15_12(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vst1.32 {tmp2, tmp3}, [RWK]; \ + + +/********* Precalc macros for rounds 16-31 ************************************/ + +#define WPRECALC_16_31_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor tmp0, tmp0; \ + vext.8 W, W_m16, W_m12, #8; \ + +#define WPRECALC_16_31_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + add RWK, sp, #(WK_offs(i)); \ + vext.8 tmp0, W_m04, tmp0, #4; \ + +#define WPRECALC_16_31_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor tmp0, tmp0, W_m16; \ + veor.32 W, W, W_m08; \ + +#define WPRECALC_16_31_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor tmp1, tmp1; \ + veor W, W, tmp0; \ + +#define WPRECALC_16_31_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vshl.u32 tmp0, W, #1; \ + +#define WPRECALC_16_31_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vext.8 tmp1, tmp1, W, #(16-12); \ + vshr.u32 W, W, #31; \ + +#define WPRECALC_16_31_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vorr tmp0, tmp0, W; \ + vshr.u32 W, tmp1, #30; \ + +#define WPRECALC_16_31_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vshl.u32 tmp1, tmp1, #2; \ + +#define WPRECALC_16_31_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor tmp0, tmp0, W; \ + +#define WPRECALC_16_31_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor W, tmp0, tmp1; \ + +#define WPRECALC_16_31_10(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp0, W, curK; \ + +#define WPRECALC_16_31_11(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vst1.32 {tmp0}, [RWK]; + + +/********* Precalc macros for rounds 32-79 ************************************/ + +#define WPRECALC_32_79_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor W, W_m28; \ + +#define WPRECALC_32_79_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vext.8 tmp0, W_m08, W_m04, #8; \ + +#define WPRECALC_32_79_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor W, W_m16; \ + +#define WPRECALC_32_79_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor W, tmp0; \ + +#define WPRECALC_32_79_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + add RWK, sp, #(WK_offs(i&~3)); \ + +#define WPRECALC_32_79_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vshl.u32 tmp1, W, #2; \ + +#define WPRECALC_32_79_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vshr.u32 tmp0, W, #30; \ + +#define WPRECALC_32_79_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vorr W, tmp0, tmp1; \ + +#define WPRECALC_32_79_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp0, W, curK; \ + +#define WPRECALC_32_79_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vst1.32 {tmp0}, [RWK]; + + +/* + * Transform nblks*64 bytes (nblks*16 32-bit words) at DATA. + * + * unsigned int + * sha1_transform_neon (void *ctx, const unsigned char *data, + * unsigned int nblks) + */ +.align 3 +ENTRY(sha1_transform_neon) + /* input: + * r0: ctx, CTX + * r1: data (64*nblks bytes) + * r2: nblks + */ + + cmp RNBLKS, #0; + beq .Ldo_nothing; + + push {r4-r12, lr}; + /*vpush {q4-q7};*/ + + adr RT3, .LK_VEC; + + mov ROLDSTACK, sp; + + /* Align stack. */ + sub RT0, sp, #(16*4); + and RT0, #(~(16-1)); + mov sp, RT0; + + vld1.32 {qK1-qK2}, [RT3]!; /* Load K1,K2 */ + + /* Get the values of the chaining variables. */ + ldm RSTATE, {_a-_e}; + + vld1.32 {qK3-qK4}, [RT3]; /* Load K3,K4 */ + +#undef curK +#define curK qK1 + /* Precalc 0-15. */ + W_PRECALC_00_15(); + +.Loop: + /* Transform 0-15 + Precalc 16-31. */ + _R( _a, _b, _c, _d, _e, F1, 0, + WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 16, + W4, W5, W6, W7, W0, _, _, _ ); + _R( _e, _a, _b, _c, _d, F1, 1, + WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 16, + W4, W5, W6, W7, W0, _, _, _ ); + _R( _d, _e, _a, _b, _c, F1, 2, + WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 16, + W4, W5, W6, W7, W0, _, _, _ ); + _R( _c, _d, _e, _a, _b, F1, 3, + WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,16, + W4, W5, W6, W7, W0, _, _, _ ); + +#undef curK +#define curK qK2 + _R( _b, _c, _d, _e, _a, F1, 4, + WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 20, + W3, W4, W5, W6, W7, _, _, _ ); + _R( _a, _b, _c, _d, _e, F1, 5, + WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 20, + W3, W4, W5, W6, W7, _, _, _ ); + _R( _e, _a, _b, _c, _d, F1, 6, + WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 20, + W3, W4, W5, W6, W7, _, _, _ ); + _R( _d, _e, _a, _b, _c, F1, 7, + WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,20, + W3, W4, W5, W6, W7, _, _, _ ); + + _R( _c, _d, _e, _a, _b, F1, 8, + WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 24, + W2, W3, W4, W5, W6, _, _, _ ); + _R( _b, _c, _d, _e, _a, F1, 9, + WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 24, + W2, W3, W4, W5, W6, _, _, _ ); + _R( _a, _b, _c, _d, _e, F1, 10, + WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 24, + W2, W3, W4, W5, W6, _, _, _ ); + _R( _e, _a, _b, _c, _d, F1, 11, + WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,24, + W2, W3, W4, W5, W6, _, _, _ ); + + _R( _d, _e, _a, _b, _c, F1, 12, + WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 28, + W1, W2, W3, W4, W5, _, _, _ ); + _R( _c, _d, _e, _a, _b, F1, 13, + WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 28, + W1, W2, W3, W4, W5, _, _, _ ); + _R( _b, _c, _d, _e, _a, F1, 14, + WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 28, + W1, W2, W3, W4, W5, _, _, _ ); + _R( _a, _b, _c, _d, _e, F1, 15, + WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,28, + W1, W2, W3, W4, W5, _, _, _ ); + + /* Transform 16-63 + Precalc 32-79. */ + _R( _e, _a, _b, _c, _d, F1, 16, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 32, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _d, _e, _a, _b, _c, F1, 17, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 32, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _c, _d, _e, _a, _b, F1, 18, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 32, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _b, _c, _d, _e, _a, F1, 19, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 32, + W0, W1, W2, W3, W4, W5, W6, W7); + + _R( _a, _b, _c, _d, _e, F2, 20, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 36, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _e, _a, _b, _c, _d, F2, 21, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 36, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _d, _e, _a, _b, _c, F2, 22, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 36, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _c, _d, _e, _a, _b, F2, 23, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 36, + W7, W0, W1, W2, W3, W4, W5, W6); + +#undef curK +#define curK qK3 + _R( _b, _c, _d, _e, _a, F2, 24, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 40, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _a, _b, _c, _d, _e, F2, 25, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 40, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _e, _a, _b, _c, _d, F2, 26, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 40, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _d, _e, _a, _b, _c, F2, 27, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 40, + W6, W7, W0, W1, W2, W3, W4, W5); + + _R( _c, _d, _e, _a, _b, F2, 28, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 44, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _b, _c, _d, _e, _a, F2, 29, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 44, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _a, _b, _c, _d, _e, F2, 30, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 44, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _e, _a, _b, _c, _d, F2, 31, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 44, + W5, W6, W7, W0, W1, W2, W3, W4); + + _R( _d, _e, _a, _b, _c, F2, 32, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 48, + W4, W5, W6, W7, W0, W1, W2, W3); + _R( _c, _d, _e, _a, _b, F2, 33, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 48, + W4, W5, W6, W7, W0, W1, W2, W3); + _R( _b, _c, _d, _e, _a, F2, 34, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 48, + W4, W5, W6, W7, W0, W1, W2, W3); + _R( _a, _b, _c, _d, _e, F2, 35, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 48, + W4, W5, W6, W7, W0, W1, W2, W3); + + _R( _e, _a, _b, _c, _d, F2, 36, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 52, + W3, W4, W5, W6, W7, W0, W1, W2); + _R( _d, _e, _a, _b, _c, F2, 37, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 52, + W3, W4, W5, W6, W7, W0, W1, W2); + _R( _c, _d, _e, _a, _b, F2, 38, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 52, + W3, W4, W5, W6, W7, W0, W1, W2); + _R( _b, _c, _d, _e, _a, F2, 39, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 52, + W3, W4, W5, W6, W7, W0, W1, W2); + + _R( _a, _b, _c, _d, _e, F3, 40, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 56, + W2, W3, W4, W5, W6, W7, W0, W1); + _R( _e, _a, _b, _c, _d, F3, 41, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 56, + W2, W3, W4, W5, W6, W7, W0, W1); + _R( _d, _e, _a, _b, _c, F3, 42, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 56, + W2, W3, W4, W5, W6, W7, W0, W1); + _R( _c, _d, _e, _a, _b, F3, 43, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 56, + W2, W3, W4, W5, W6, W7, W0, W1); + +#undef curK +#define curK qK4 + _R( _b, _c, _d, _e, _a, F3, 44, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 60, + W1, W2, W3, W4, W5, W6, W7, W0); + _R( _a, _b, _c, _d, _e, F3, 45, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 60, + W1, W2, W3, W4, W5, W6, W7, W0); + _R( _e, _a, _b, _c, _d, F3, 46, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 60, + W1, W2, W3, W4, W5, W6, W7, W0); + _R( _d, _e, _a, _b, _c, F3, 47, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 60, + W1, W2, W3, W4, W5, W6, W7, W0); + + _R( _c, _d, _e, _a, _b, F3, 48, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 64, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _b, _c, _d, _e, _a, F3, 49, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 64, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _a, _b, _c, _d, _e, F3, 50, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 64, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _e, _a, _b, _c, _d, F3, 51, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 64, + W0, W1, W2, W3, W4, W5, W6, W7); + + _R( _d, _e, _a, _b, _c, F3, 52, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 68, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _c, _d, _e, _a, _b, F3, 53, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 68, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _b, _c, _d, _e, _a, F3, 54, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 68, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _a, _b, _c, _d, _e, F3, 55, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 68, + W7, W0, W1, W2, W3, W4, W5, W6); + + _R( _e, _a, _b, _c, _d, F3, 56, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 72, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _d, _e, _a, _b, _c, F3, 57, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 72, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _c, _d, _e, _a, _b, F3, 58, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 72, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _b, _c, _d, _e, _a, F3, 59, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 72, + W6, W7, W0, W1, W2, W3, W4, W5); + + subs RNBLKS, #1; + + _R( _a, _b, _c, _d, _e, F4, 60, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 76, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _e, _a, _b, _c, _d, F4, 61, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 76, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _d, _e, _a, _b, _c, F4, 62, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 76, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _c, _d, _e, _a, _b, F4, 63, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 76, + W5, W6, W7, W0, W1, W2, W3, W4); + + beq .Lend; + + /* Transform 64-79 + Precalc 0-15 of next block. */ +#undef curK +#define curK qK1 + _R( _b, _c, _d, _e, _a, F4, 64, + WPRECALC_00_15_0, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _a, _b, _c, _d, _e, F4, 65, + WPRECALC_00_15_1, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _e, _a, _b, _c, _d, F4, 66, + WPRECALC_00_15_2, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _d, _e, _a, _b, _c, F4, 67, + WPRECALC_00_15_3, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + + _R( _c, _d, _e, _a, _b, F4, 68, + dummy, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _b, _c, _d, _e, _a, F4, 69, + dummy, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _a, _b, _c, _d, _e, F4, 70, + WPRECALC_00_15_4, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _e, _a, _b, _c, _d, F4, 71, + WPRECALC_00_15_5, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + + _R( _d, _e, _a, _b, _c, F4, 72, + dummy, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _c, _d, _e, _a, _b, F4, 73, + dummy, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _b, _c, _d, _e, _a, F4, 74, + WPRECALC_00_15_6, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _a, _b, _c, _d, _e, F4, 75, + WPRECALC_00_15_7, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + + _R( _e, _a, _b, _c, _d, F4, 76, + WPRECALC_00_15_8, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _d, _e, _a, _b, _c, F4, 77, + WPRECALC_00_15_9, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _c, _d, _e, _a, _b, F4, 78, + WPRECALC_00_15_10, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _b, _c, _d, _e, _a, F4, 79, + WPRECALC_00_15_11, dummy, WPRECALC_00_15_12, _, _, _, _, _, _, _, _, _ ); + + /* Update the chaining variables. */ + ldm RSTATE, {RT0-RT3}; + add _a, RT0; + ldr RT0, [RSTATE, #state_h4]; + add _b, RT1; + add _c, RT2; + add _d, RT3; + add _e, RT0; + stm RSTATE, {_a-_e}; + + b .Loop; + +.Lend: + /* Transform 64-79 */ + R( _b, _c, _d, _e, _a, F4, 64 ); + R( _a, _b, _c, _d, _e, F4, 65 ); + R( _e, _a, _b, _c, _d, F4, 66 ); + R( _d, _e, _a, _b, _c, F4, 67 ); + R( _c, _d, _e, _a, _b, F4, 68 ); + R( _b, _c, _d, _e, _a, F4, 69 ); + R( _a, _b, _c, _d, _e, F4, 70 ); + R( _e, _a, _b, _c, _d, F4, 71 ); + R( _d, _e, _a, _b, _c, F4, 72 ); + R( _c, _d, _e, _a, _b, F4, 73 ); + R( _b, _c, _d, _e, _a, F4, 74 ); + R( _a, _b, _c, _d, _e, F4, 75 ); + R( _e, _a, _b, _c, _d, F4, 76 ); + R( _d, _e, _a, _b, _c, F4, 77 ); + R( _c, _d, _e, _a, _b, F4, 78 ); + R( _b, _c, _d, _e, _a, F4, 79 ); + + mov sp, ROLDSTACK; + + /* Update the chaining variables. */ + ldm RSTATE, {RT0-RT3}; + add _a, RT0; + ldr RT0, [RSTATE, #state_h4]; + add _b, RT1; + add _c, RT2; + add _d, RT3; + /*vpop {q4-q7};*/ + add _e, RT0; + stm RSTATE, {_a-_e}; + + pop {r4-r12, pc}; + +.Ldo_nothing: + bx lr +ENDPROC(sha1_transform_neon) diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c index 76cd976230bc..84f2a756588b 100644 --- a/arch/arm/crypto/sha1_glue.c +++ b/arch/arm/crypto/sha1_glue.c @@ -23,32 +23,27 @@ #include <linux/types.h> #include <crypto/sha.h> #include <asm/byteorder.h> +#include <asm/crypto/sha1.h> -struct SHA1_CTX { - uint32_t h0,h1,h2,h3,h4; - u64 count; - u8 data[SHA1_BLOCK_SIZE]; -}; -asmlinkage void sha1_block_data_order(struct SHA1_CTX *digest, +asmlinkage void sha1_block_data_order(u32 *digest, const unsigned char *data, unsigned int rounds); static int sha1_init(struct shash_desc *desc) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); - memset(sctx, 0, sizeof(*sctx)); - sctx->h0 = SHA1_H0; - sctx->h1 = SHA1_H1; - sctx->h2 = SHA1_H2; - sctx->h3 = SHA1_H3; - sctx->h4 = SHA1_H4; + struct sha1_state *sctx = shash_desc_ctx(desc); + + *sctx = (struct sha1_state){ + .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, + }; + return 0; } -static int __sha1_update(struct SHA1_CTX *sctx, const u8 *data, - unsigned int len, unsigned int partial) +static int __sha1_update(struct sha1_state *sctx, const u8 *data, + unsigned int len, unsigned int partial) { unsigned int done = 0; @@ -56,43 +51,44 @@ static int __sha1_update(struct SHA1_CTX *sctx, const u8 *data, if (partial) { done = SHA1_BLOCK_SIZE - partial; - memcpy(sctx->data + partial, data, done); - sha1_block_data_order(sctx, sctx->data, 1); + memcpy(sctx->buffer + partial, data, done); + sha1_block_data_order(sctx->state, sctx->buffer, 1); } if (len - done >= SHA1_BLOCK_SIZE) { const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; - sha1_block_data_order(sctx, data + done, rounds); + sha1_block_data_order(sctx->state, data + done, rounds); done += rounds * SHA1_BLOCK_SIZE; } - memcpy(sctx->data, data + done, len - done); + memcpy(sctx->buffer, data + done, len - done); return 0; } -static int sha1_update(struct shash_desc *desc, const u8 *data, - unsigned int len) +int sha1_update_arm(struct shash_desc *desc, const u8 *data, + unsigned int len) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); + struct sha1_state *sctx = shash_desc_ctx(desc); unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; int res; /* Handle the fast case right here */ if (partial + len < SHA1_BLOCK_SIZE) { sctx->count += len; - memcpy(sctx->data + partial, data, len); + memcpy(sctx->buffer + partial, data, len); return 0; } res = __sha1_update(sctx, data, len, partial); return res; } +EXPORT_SYMBOL_GPL(sha1_update_arm); /* Add padding and return the message digest. */ static int sha1_final(struct shash_desc *desc, u8 *out) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); + struct sha1_state *sctx = shash_desc_ctx(desc); unsigned int i, index, padlen; __be32 *dst = (__be32 *)out; __be64 bits; @@ -106,7 +102,7 @@ static int sha1_final(struct shash_desc *desc, u8 *out) /* We need to fill a whole block for __sha1_update() */ if (padlen <= 56) { sctx->count += padlen; - memcpy(sctx->data + index, padding, padlen); + memcpy(sctx->buffer + index, padding, padlen); } else { __sha1_update(sctx, padding, padlen, index); } @@ -114,7 +110,7 @@ static int sha1_final(struct shash_desc *desc, u8 *out) /* Store state in digest */ for (i = 0; i < 5; i++) - dst[i] = cpu_to_be32(((u32 *)sctx)[i]); + dst[i] = cpu_to_be32(sctx->state[i]); /* Wipe context */ memset(sctx, 0, sizeof(*sctx)); @@ -124,7 +120,7 @@ static int sha1_final(struct shash_desc *desc, u8 *out) static int sha1_export(struct shash_desc *desc, void *out) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); + struct sha1_state *sctx = shash_desc_ctx(desc); memcpy(out, sctx, sizeof(*sctx)); return 0; } @@ -132,7 +128,7 @@ static int sha1_export(struct shash_desc *desc, void *out) static int sha1_import(struct shash_desc *desc, const void *in) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); + struct sha1_state *sctx = shash_desc_ctx(desc); memcpy(sctx, in, sizeof(*sctx)); return 0; } @@ -141,12 +137,12 @@ static int sha1_import(struct shash_desc *desc, const void *in) static struct shash_alg alg = { .digestsize = SHA1_DIGEST_SIZE, .init = sha1_init, - .update = sha1_update, + .update = sha1_update_arm, .final = sha1_final, .export = sha1_export, .import = sha1_import, - .descsize = sizeof(struct SHA1_CTX), - .statesize = sizeof(struct SHA1_CTX), + .descsize = sizeof(struct sha1_state), + .statesize = sizeof(struct sha1_state), .base = { .cra_name = "sha1", .cra_driver_name= "sha1-asm", diff --git a/arch/arm/crypto/sha1_neon_glue.c b/arch/arm/crypto/sha1_neon_glue.c new file mode 100644 index 000000000000..6f1b411b1d55 --- /dev/null +++ b/arch/arm/crypto/sha1_neon_glue.c @@ -0,0 +1,197 @@ +/* + * Glue code for the SHA1 Secure Hash Algorithm assembler implementation using + * ARM NEON instructions. + * + * Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> + * + * This file is based on sha1_generic.c and sha1_ssse3_glue.c: + * Copyright (c) Alan Smithee. + * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk> + * Copyright (c) Jean-Francois Dive <jef@linuxbe.org> + * Copyright (c) Mathias Krause <minipli@googlemail.com> + * Copyright (c) Chandramouli Narayanan <mouli@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include <crypto/internal/hash.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/cryptohash.h> +#include <linux/types.h> +#include <crypto/sha.h> +#include <asm/byteorder.h> +#include <asm/neon.h> +#include <asm/simd.h> +#include <asm/crypto/sha1.h> + + +asmlinkage void sha1_transform_neon(void *state_h, const char *data, + unsigned int rounds); + + +static int sha1_neon_init(struct shash_desc *desc) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + *sctx = (struct sha1_state){ + .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, + }; + + return 0; +} + +static int __sha1_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len, unsigned int partial) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + unsigned int done = 0; + + sctx->count += len; + + if (partial) { + done = SHA1_BLOCK_SIZE - partial; + memcpy(sctx->buffer + partial, data, done); + sha1_transform_neon(sctx->state, sctx->buffer, 1); + } + + if (len - done >= SHA1_BLOCK_SIZE) { + const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; + + sha1_transform_neon(sctx->state, data + done, rounds); + done += rounds * SHA1_BLOCK_SIZE; + } + + memcpy(sctx->buffer, data + done, len - done); + + return 0; +} + +static int sha1_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; + int res; + + /* Handle the fast case right here */ + if (partial + len < SHA1_BLOCK_SIZE) { + sctx->count += len; + memcpy(sctx->buffer + partial, data, len); + + return 0; + } + + if (!may_use_simd()) { + res = sha1_update_arm(desc, data, len); + } else { + kernel_neon_begin(); + res = __sha1_neon_update(desc, data, len, partial); + kernel_neon_end(); + } + + return res; +} + + +/* Add padding and return the message digest. */ +static int sha1_neon_final(struct shash_desc *desc, u8 *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + unsigned int i, index, padlen; + __be32 *dst = (__be32 *)out; + __be64 bits; + static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; + + bits = cpu_to_be64(sctx->count << 3); + + /* Pad out to 56 mod 64 and append length */ + index = sctx->count % SHA1_BLOCK_SIZE; + padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index); + if (!may_use_simd()) { + sha1_update_arm(desc, padding, padlen); + sha1_update_arm(desc, (const u8 *)&bits, sizeof(bits)); + } else { + kernel_neon_begin(); + /* We need to fill a whole block for __sha1_neon_update() */ + if (padlen <= 56) { + sctx->count += padlen; + memcpy(sctx->buffer + index, padding, padlen); + } else { + __sha1_neon_update(desc, padding, padlen, index); + } + __sha1_neon_update(desc, (const u8 *)&bits, sizeof(bits), 56); + kernel_neon_end(); + } + + /* Store state in digest */ + for (i = 0; i < 5; i++) + dst[i] = cpu_to_be32(sctx->state[i]); + + /* Wipe context */ + memset(sctx, 0, sizeof(*sctx)); + + return 0; +} + +static int sha1_neon_export(struct shash_desc *desc, void *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + memcpy(out, sctx, sizeof(*sctx)); + + return 0; +} + +static int sha1_neon_import(struct shash_desc *desc, const void *in) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + memcpy(sctx, in, sizeof(*sctx)); + + return 0; +} + +static struct shash_alg alg = { + .digestsize = SHA1_DIGEST_SIZE, + .init = sha1_neon_init, + .update = sha1_neon_update, + .final = sha1_neon_final, + .export = sha1_neon_export, + .import = sha1_neon_import, + .descsize = sizeof(struct sha1_state), + .statesize = sizeof(struct sha1_state), + .base = { + .cra_name = "sha1", + .cra_driver_name = "sha1-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + +static int __init sha1_neon_mod_init(void) +{ + if (!cpu_has_neon()) + return -ENODEV; + + return crypto_register_shash(&alg); +} + +static void __exit sha1_neon_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + +module_init(sha1_neon_mod_init); +module_exit(sha1_neon_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, NEON accelerated"); +MODULE_ALIAS("sha1"); diff --git a/arch/arm/crypto/sha512-armv7-neon.S b/arch/arm/crypto/sha512-armv7-neon.S new file mode 100644 index 000000000000..fe99472e507c --- /dev/null +++ b/arch/arm/crypto/sha512-armv7-neon.S @@ -0,0 +1,455 @@ +/* sha512-armv7-neon.S - ARM/NEON assembly implementation of SHA-512 transform + * + * Copyright © 2013-2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/linkage.h> + + +.syntax unified +.code 32 +.fpu neon + +.text + +/* structure of SHA512_CONTEXT */ +#define hd_a 0 +#define hd_b ((hd_a) + 8) +#define hd_c ((hd_b) + 8) +#define hd_d ((hd_c) + 8) +#define hd_e ((hd_d) + 8) +#define hd_f ((hd_e) + 8) +#define hd_g ((hd_f) + 8) + +/* register macros */ +#define RK %r2 + +#define RA d0 +#define RB d1 +#define RC d2 +#define RD d3 +#define RE d4 +#define RF d5 +#define RG d6 +#define RH d7 + +#define RT0 d8 +#define RT1 d9 +#define RT2 d10 +#define RT3 d11 +#define RT4 d12 +#define RT5 d13 +#define RT6 d14 +#define RT7 d15 + +#define RT01q q4 +#define RT23q q5 +#define RT45q q6 +#define RT67q q7 + +#define RW0 d16 +#define RW1 d17 +#define RW2 d18 +#define RW3 d19 +#define RW4 d20 +#define RW5 d21 +#define RW6 d22 +#define RW7 d23 +#define RW8 d24 +#define RW9 d25 +#define RW10 d26 +#define RW11 d27 +#define RW12 d28 +#define RW13 d29 +#define RW14 d30 +#define RW15 d31 + +#define RW01q q8 +#define RW23q q9 +#define RW45q q10 +#define RW67q q11 +#define RW89q q12 +#define RW1011q q13 +#define RW1213q q14 +#define RW1415q q15 + +/*********************************************************************** + * ARM assembly implementation of sha512 transform + ***********************************************************************/ +#define rounds2_0_63(ra, rb, rc, rd, re, rf, rg, rh, rw0, rw1, rw01q, rw2, \ + rw23q, rw1415q, rw9, rw10, interleave_op, arg1) \ + /* t1 = h + Sum1 (e) + Ch (e, f, g) + k[t] + w[t]; */ \ + vshr.u64 RT2, re, #14; \ + vshl.u64 RT3, re, #64 - 14; \ + interleave_op(arg1); \ + vshr.u64 RT4, re, #18; \ + vshl.u64 RT5, re, #64 - 18; \ + vld1.64 {RT0}, [RK]!; \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, re, #41; \ + vshl.u64 RT5, re, #64 - 41; \ + vadd.u64 RT0, RT0, rw0; \ + veor.64 RT23q, RT23q, RT45q; \ + vmov.64 RT7, re; \ + veor.64 RT1, RT2, RT3; \ + vbsl.64 RT7, rf, rg; \ + \ + vadd.u64 RT1, RT1, rh; \ + vshr.u64 RT2, ra, #28; \ + vshl.u64 RT3, ra, #64 - 28; \ + vadd.u64 RT1, RT1, RT0; \ + vshr.u64 RT4, ra, #34; \ + vshl.u64 RT5, ra, #64 - 34; \ + vadd.u64 RT1, RT1, RT7; \ + \ + /* h = Sum0 (a) + Maj (a, b, c); */ \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, ra, #39; \ + vshl.u64 RT5, ra, #64 - 39; \ + veor.64 RT0, ra, rb; \ + veor.64 RT23q, RT23q, RT45q; \ + vbsl.64 RT0, rc, rb; \ + vadd.u64 rd, rd, RT1; /* d+=t1; */ \ + veor.64 rh, RT2, RT3; \ + \ + /* t1 = g + Sum1 (d) + Ch (d, e, f) + k[t] + w[t]; */ \ + vshr.u64 RT2, rd, #14; \ + vshl.u64 RT3, rd, #64 - 14; \ + vadd.u64 rh, rh, RT0; \ + vshr.u64 RT4, rd, #18; \ + vshl.u64 RT5, rd, #64 - 18; \ + vadd.u64 rh, rh, RT1; /* h+=t1; */ \ + vld1.64 {RT0}, [RK]!; \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, rd, #41; \ + vshl.u64 RT5, rd, #64 - 41; \ + vadd.u64 RT0, RT0, rw1; \ + veor.64 RT23q, RT23q, RT45q; \ + vmov.64 RT7, rd; \ + veor.64 RT1, RT2, RT3; \ + vbsl.64 RT7, re, rf; \ + \ + vadd.u64 RT1, RT1, rg; \ + vshr.u64 RT2, rh, #28; \ + vshl.u64 RT3, rh, #64 - 28; \ + vadd.u64 RT1, RT1, RT0; \ + vshr.u64 RT4, rh, #34; \ + vshl.u64 RT5, rh, #64 - 34; \ + vadd.u64 RT1, RT1, RT7; \ + \ + /* g = Sum0 (h) + Maj (h, a, b); */ \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, rh, #39; \ + vshl.u64 RT5, rh, #64 - 39; \ + veor.64 RT0, rh, ra; \ + veor.64 RT23q, RT23q, RT45q; \ + vbsl.64 RT0, rb, ra; \ + vadd.u64 rc, rc, RT1; /* c+=t1; */ \ + veor.64 rg, RT2, RT3; \ + \ + /* w[0] += S1 (w[14]) + w[9] + S0 (w[1]); */ \ + /* w[1] += S1 (w[15]) + w[10] + S0 (w[2]); */ \ + \ + /**** S0(w[1:2]) */ \ + \ + /* w[0:1] += w[9:10] */ \ + /* RT23q = rw1:rw2 */ \ + vext.u64 RT23q, rw01q, rw23q, #1; \ + vadd.u64 rw0, rw9; \ + vadd.u64 rg, rg, RT0; \ + vadd.u64 rw1, rw10;\ + vadd.u64 rg, rg, RT1; /* g+=t1; */ \ + \ + vshr.u64 RT45q, RT23q, #1; \ + vshl.u64 RT67q, RT23q, #64 - 1; \ + vshr.u64 RT01q, RT23q, #8; \ + veor.u64 RT45q, RT45q, RT67q; \ + vshl.u64 RT67q, RT23q, #64 - 8; \ + veor.u64 RT45q, RT45q, RT01q; \ + vshr.u64 RT01q, RT23q, #7; \ + veor.u64 RT45q, RT45q, RT67q; \ + \ + /**** S1(w[14:15]) */ \ + vshr.u64 RT23q, rw1415q, #6; \ + veor.u64 RT01q, RT01q, RT45q; \ + vshr.u64 RT45q, rw1415q, #19; \ + vshl.u64 RT67q, rw1415q, #64 - 19; \ + veor.u64 RT23q, RT23q, RT45q; \ + vshr.u64 RT45q, rw1415q, #61; \ + veor.u64 RT23q, RT23q, RT67q; \ + vshl.u64 RT67q, rw1415q, #64 - 61; \ + veor.u64 RT23q, RT23q, RT45q; \ + vadd.u64 rw01q, RT01q; /* w[0:1] += S(w[1:2]) */ \ + veor.u64 RT01q, RT23q, RT67q; +#define vadd_RT01q(rw01q) \ + /* w[0:1] += S(w[14:15]) */ \ + vadd.u64 rw01q, RT01q; + +#define dummy(_) /*_*/ + +#define rounds2_64_79(ra, rb, rc, rd, re, rf, rg, rh, rw0, rw1, \ + interleave_op1, arg1, interleave_op2, arg2) \ + /* t1 = h + Sum1 (e) + Ch (e, f, g) + k[t] + w[t]; */ \ + vshr.u64 RT2, re, #14; \ + vshl.u64 RT3, re, #64 - 14; \ + interleave_op1(arg1); \ + vshr.u64 RT4, re, #18; \ + vshl.u64 RT5, re, #64 - 18; \ + interleave_op2(arg2); \ + vld1.64 {RT0}, [RK]!; \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, re, #41; \ + vshl.u64 RT5, re, #64 - 41; \ + vadd.u64 RT0, RT0, rw0; \ + veor.64 RT23q, RT23q, RT45q; \ + vmov.64 RT7, re; \ + veor.64 RT1, RT2, RT3; \ + vbsl.64 RT7, rf, rg; \ + \ + vadd.u64 RT1, RT1, rh; \ + vshr.u64 RT2, ra, #28; \ + vshl.u64 RT3, ra, #64 - 28; \ + vadd.u64 RT1, RT1, RT0; \ + vshr.u64 RT4, ra, #34; \ + vshl.u64 RT5, ra, #64 - 34; \ + vadd.u64 RT1, RT1, RT7; \ + \ + /* h = Sum0 (a) + Maj (a, b, c); */ \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, ra, #39; \ + vshl.u64 RT5, ra, #64 - 39; \ + veor.64 RT0, ra, rb; \ + veor.64 RT23q, RT23q, RT45q; \ + vbsl.64 RT0, rc, rb; \ + vadd.u64 rd, rd, RT1; /* d+=t1; */ \ + veor.64 rh, RT2, RT3; \ + \ + /* t1 = g + Sum1 (d) + Ch (d, e, f) + k[t] + w[t]; */ \ + vshr.u64 RT2, rd, #14; \ + vshl.u64 RT3, rd, #64 - 14; \ + vadd.u64 rh, rh, RT0; \ + vshr.u64 RT4, rd, #18; \ + vshl.u64 RT5, rd, #64 - 18; \ + vadd.u64 rh, rh, RT1; /* h+=t1; */ \ + vld1.64 {RT0}, [RK]!; \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, rd, #41; \ + vshl.u64 RT5, rd, #64 - 41; \ + vadd.u64 RT0, RT0, rw1; \ + veor.64 RT23q, RT23q, RT45q; \ + vmov.64 RT7, rd; \ + veor.64 RT1, RT2, RT3; \ + vbsl.64 RT7, re, rf; \ + \ + vadd.u64 RT1, RT1, rg; \ + vshr.u64 RT2, rh, #28; \ + vshl.u64 RT3, rh, #64 - 28; \ + vadd.u64 RT1, RT1, RT0; \ + vshr.u64 RT4, rh, #34; \ + vshl.u64 RT5, rh, #64 - 34; \ + vadd.u64 RT1, RT1, RT7; \ + \ + /* g = Sum0 (h) + Maj (h, a, b); */ \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, rh, #39; \ + vshl.u64 RT5, rh, #64 - 39; \ + veor.64 RT0, rh, ra; \ + veor.64 RT23q, RT23q, RT45q; \ + vbsl.64 RT0, rb, ra; \ + vadd.u64 rc, rc, RT1; /* c+=t1; */ \ + veor.64 rg, RT2, RT3; +#define vadd_rg_RT0(rg) \ + vadd.u64 rg, rg, RT0; +#define vadd_rg_RT1(rg) \ + vadd.u64 rg, rg, RT1; /* g+=t1; */ + +.align 3 +ENTRY(sha512_transform_neon) + /* Input: + * %r0: SHA512_CONTEXT + * %r1: data + * %r2: u64 k[] constants + * %r3: nblks + */ + push {%lr}; + + mov %lr, #0; + + /* Load context to d0-d7 */ + vld1.64 {RA-RD}, [%r0]!; + vld1.64 {RE-RH}, [%r0]; + sub %r0, #(4*8); + + /* Load input to w[16], d16-d31 */ + /* NOTE: Assumes that on ARMv7 unaligned accesses are always allowed. */ + vld1.64 {RW0-RW3}, [%r1]!; + vld1.64 {RW4-RW7}, [%r1]!; + vld1.64 {RW8-RW11}, [%r1]!; + vld1.64 {RW12-RW15}, [%r1]!; +#ifdef __ARMEL__ + /* byteswap */ + vrev64.8 RW01q, RW01q; + vrev64.8 RW23q, RW23q; + vrev64.8 RW45q, RW45q; + vrev64.8 RW67q, RW67q; + vrev64.8 RW89q, RW89q; + vrev64.8 RW1011q, RW1011q; + vrev64.8 RW1213q, RW1213q; + vrev64.8 RW1415q, RW1415q; +#endif + + /* EABI says that d8-d15 must be preserved by callee. */ + /*vpush {RT0-RT7};*/ + +.Loop: + rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, RW01q, RW2, + RW23q, RW1415q, RW9, RW10, dummy, _); + b .Lenter_rounds; + +.Loop_rounds: + rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, RW01q, RW2, + RW23q, RW1415q, RW9, RW10, vadd_RT01q, RW1415q); +.Lenter_rounds: + rounds2_0_63(RG, RH, RA, RB, RC, RD, RE, RF, RW2, RW3, RW23q, RW4, + RW45q, RW01q, RW11, RW12, vadd_RT01q, RW01q); + rounds2_0_63(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, RW45q, RW6, + RW67q, RW23q, RW13, RW14, vadd_RT01q, RW23q); + rounds2_0_63(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, RW67q, RW8, + RW89q, RW45q, RW15, RW0, vadd_RT01q, RW45q); + rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, RW89q, RW10, + RW1011q, RW67q, RW1, RW2, vadd_RT01q, RW67q); + rounds2_0_63(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, RW1011q, RW12, + RW1213q, RW89q, RW3, RW4, vadd_RT01q, RW89q); + add %lr, #16; + rounds2_0_63(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, RW1213q, RW14, + RW1415q, RW1011q, RW5, RW6, vadd_RT01q, RW1011q); + cmp %lr, #64; + rounds2_0_63(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, RW1415q, RW0, + RW01q, RW1213q, RW7, RW8, vadd_RT01q, RW1213q); + bne .Loop_rounds; + + subs %r3, #1; + + rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, + vadd_RT01q, RW1415q, dummy, _); + rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW2, RW3, + vadd_rg_RT0, RG, vadd_rg_RT1, RG); + beq .Lhandle_tail; + vld1.64 {RW0-RW3}, [%r1]!; + rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, + vadd_rg_RT0, RE, vadd_rg_RT1, RE); + rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, + vadd_rg_RT0, RC, vadd_rg_RT1, RC); +#ifdef __ARMEL__ + vrev64.8 RW01q, RW01q; + vrev64.8 RW23q, RW23q; +#endif + vld1.64 {RW4-RW7}, [%r1]!; + rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, + vadd_rg_RT0, RA, vadd_rg_RT1, RA); + rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, + vadd_rg_RT0, RG, vadd_rg_RT1, RG); +#ifdef __ARMEL__ + vrev64.8 RW45q, RW45q; + vrev64.8 RW67q, RW67q; +#endif + vld1.64 {RW8-RW11}, [%r1]!; + rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, + vadd_rg_RT0, RE, vadd_rg_RT1, RE); + rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, + vadd_rg_RT0, RC, vadd_rg_RT1, RC); +#ifdef __ARMEL__ + vrev64.8 RW89q, RW89q; + vrev64.8 RW1011q, RW1011q; +#endif + vld1.64 {RW12-RW15}, [%r1]!; + vadd_rg_RT0(RA); + vadd_rg_RT1(RA); + + /* Load context */ + vld1.64 {RT0-RT3}, [%r0]!; + vld1.64 {RT4-RT7}, [%r0]; + sub %r0, #(4*8); + +#ifdef __ARMEL__ + vrev64.8 RW1213q, RW1213q; + vrev64.8 RW1415q, RW1415q; +#endif + + vadd.u64 RA, RT0; + vadd.u64 RB, RT1; + vadd.u64 RC, RT2; + vadd.u64 RD, RT3; + vadd.u64 RE, RT4; + vadd.u64 RF, RT5; + vadd.u64 RG, RT6; + vadd.u64 RH, RT7; + + /* Store the first half of context */ + vst1.64 {RA-RD}, [%r0]!; + sub RK, $(8*80); + vst1.64 {RE-RH}, [%r0]; /* Store the last half of context */ + mov %lr, #0; + sub %r0, #(4*8); + + b .Loop; + +.Lhandle_tail: + rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, + vadd_rg_RT0, RE, vadd_rg_RT1, RE); + rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, + vadd_rg_RT0, RC, vadd_rg_RT1, RC); + rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, + vadd_rg_RT0, RA, vadd_rg_RT1, RA); + rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, + vadd_rg_RT0, RG, vadd_rg_RT1, RG); + rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, + vadd_rg_RT0, RE, vadd_rg_RT1, RE); + rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, + vadd_rg_RT0, RC, vadd_rg_RT1, RC); + + /* Load context to d16-d23 */ + vld1.64 {RW0-RW3}, [%r0]!; + vadd_rg_RT0(RA); + vld1.64 {RW4-RW7}, [%r0]; + vadd_rg_RT1(RA); + sub %r0, #(4*8); + + vadd.u64 RA, RW0; + vadd.u64 RB, RW1; + vadd.u64 RC, RW2; + vadd.u64 RD, RW3; + vadd.u64 RE, RW4; + vadd.u64 RF, RW5; + vadd.u64 RG, RW6; + vadd.u64 RH, RW7; + + /* Store the first half of context */ + vst1.64 {RA-RD}, [%r0]!; + + /* Clear used registers */ + /* d16-d31 */ + veor.u64 RW01q, RW01q; + veor.u64 RW23q, RW23q; + veor.u64 RW45q, RW45q; + veor.u64 RW67q, RW67q; + vst1.64 {RE-RH}, [%r0]; /* Store the last half of context */ + veor.u64 RW89q, RW89q; + veor.u64 RW1011q, RW1011q; + veor.u64 RW1213q, RW1213q; + veor.u64 RW1415q, RW1415q; + /* d8-d15 */ + /*vpop {RT0-RT7};*/ + /* d0-d7 (q0-q3) */ + veor.u64 %q0, %q0; + veor.u64 %q1, %q1; + veor.u64 %q2, %q2; + veor.u64 %q3, %q3; + + pop {%pc}; +ENDPROC(sha512_transform_neon) diff --git a/arch/arm/crypto/sha512_neon_glue.c b/arch/arm/crypto/sha512_neon_glue.c new file mode 100644 index 000000000000..0d2758ff5e12 --- /dev/null +++ b/arch/arm/crypto/sha512_neon_glue.c @@ -0,0 +1,305 @@ +/* + * Glue code for the SHA512 Secure Hash Algorithm assembly implementation + * using NEON instructions. + * + * Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> + * + * This file is based on sha512_ssse3_glue.c: + * Copyright (C) 2013 Intel Corporation + * Author: Tim Chen <tim.c.chen@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include <crypto/internal/hash.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/cryptohash.h> +#include <linux/types.h> +#include <linux/string.h> +#include <crypto/sha.h> +#include <asm/byteorder.h> +#include <asm/simd.h> +#include <asm/neon.h> + + +static const u64 sha512_k[] = { + 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, + 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL, + 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL, + 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL, + 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL, + 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL, + 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL, + 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL, + 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL, + 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL, + 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL, + 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL, + 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL, + 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL, + 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL, + 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL, + 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL, + 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL, + 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL, + 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL, + 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL, + 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL, + 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL, + 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL, + 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL, + 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL, + 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL, + 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL, + 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL, + 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL, + 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL, + 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL, + 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL, + 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL, + 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL, + 0x113f9804bef90daeULL, 0x1b710b35131c471bULL, + 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL, + 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL, + 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL, + 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL +}; + + +asmlinkage void sha512_transform_neon(u64 *digest, const void *data, + const u64 k[], unsigned int num_blks); + + +static int sha512_neon_init(struct shash_desc *desc) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA512_H0; + sctx->state[1] = SHA512_H1; + sctx->state[2] = SHA512_H2; + sctx->state[3] = SHA512_H3; + sctx->state[4] = SHA512_H4; + sctx->state[5] = SHA512_H5; + sctx->state[6] = SHA512_H6; + sctx->state[7] = SHA512_H7; + sctx->count[0] = sctx->count[1] = 0; + + return 0; +} + +static int __sha512_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len, unsigned int partial) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + unsigned int done = 0; + + sctx->count[0] += len; + if (sctx->count[0] < len) + sctx->count[1]++; + + if (partial) { + done = SHA512_BLOCK_SIZE - partial; + memcpy(sctx->buf + partial, data, done); + sha512_transform_neon(sctx->state, sctx->buf, sha512_k, 1); + } + + if (len - done >= SHA512_BLOCK_SIZE) { + const unsigned int rounds = (len - done) / SHA512_BLOCK_SIZE; + + sha512_transform_neon(sctx->state, data + done, sha512_k, + rounds); + + done += rounds * SHA512_BLOCK_SIZE; + } + + memcpy(sctx->buf, data + done, len - done); + + return 0; +} + +static int sha512_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + unsigned int partial = sctx->count[0] % SHA512_BLOCK_SIZE; + int res; + + /* Handle the fast case right here */ + if (partial + len < SHA512_BLOCK_SIZE) { + sctx->count[0] += len; + if (sctx->count[0] < len) + sctx->count[1]++; + memcpy(sctx->buf + partial, data, len); + + return 0; + } + + if (!may_use_simd()) { + res = crypto_sha512_update(desc, data, len); + } else { + kernel_neon_begin(); + res = __sha512_neon_update(desc, data, len, partial); + kernel_neon_end(); + } + + return res; +} + + +/* Add padding and return the message digest. */ +static int sha512_neon_final(struct shash_desc *desc, u8 *out) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + unsigned int i, index, padlen; + __be64 *dst = (__be64 *)out; + __be64 bits[2]; + static const u8 padding[SHA512_BLOCK_SIZE] = { 0x80, }; + + /* save number of bits */ + bits[1] = cpu_to_be64(sctx->count[0] << 3); + bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61); + + /* Pad out to 112 mod 128 and append length */ + index = sctx->count[0] & 0x7f; + padlen = (index < 112) ? (112 - index) : ((128+112) - index); + + if (!may_use_simd()) { + crypto_sha512_update(desc, padding, padlen); + crypto_sha512_update(desc, (const u8 *)&bits, sizeof(bits)); + } else { + kernel_neon_begin(); + /* We need to fill a whole block for __sha512_neon_update() */ + if (padlen <= 112) { + sctx->count[0] += padlen; + if (sctx->count[0] < padlen) + sctx->count[1]++; + memcpy(sctx->buf + index, padding, padlen); + } else { + __sha512_neon_update(desc, padding, padlen, index); + } + __sha512_neon_update(desc, (const u8 *)&bits, + sizeof(bits), 112); + kernel_neon_end(); + } + + /* Store state in digest */ + for (i = 0; i < 8; i++) + dst[i] = cpu_to_be64(sctx->state[i]); + + /* Wipe context */ + memset(sctx, 0, sizeof(*sctx)); + + return 0; +} + +static int sha512_neon_export(struct shash_desc *desc, void *out) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + memcpy(out, sctx, sizeof(*sctx)); + + return 0; +} + +static int sha512_neon_import(struct shash_desc *desc, const void *in) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + memcpy(sctx, in, sizeof(*sctx)); + + return 0; +} + +static int sha384_neon_init(struct shash_desc *desc) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA384_H0; + sctx->state[1] = SHA384_H1; + sctx->state[2] = SHA384_H2; + sctx->state[3] = SHA384_H3; + sctx->state[4] = SHA384_H4; + sctx->state[5] = SHA384_H5; + sctx->state[6] = SHA384_H6; + sctx->state[7] = SHA384_H7; + + sctx->count[0] = sctx->count[1] = 0; + + return 0; +} + +static int sha384_neon_final(struct shash_desc *desc, u8 *hash) +{ + u8 D[SHA512_DIGEST_SIZE]; + + sha512_neon_final(desc, D); + + memcpy(hash, D, SHA384_DIGEST_SIZE); + memset(D, 0, SHA512_DIGEST_SIZE); + + return 0; +} + +static struct shash_alg algs[] = { { + .digestsize = SHA512_DIGEST_SIZE, + .init = sha512_neon_init, + .update = sha512_neon_update, + .final = sha512_neon_final, + .export = sha512_neon_export, + .import = sha512_neon_import, + .descsize = sizeof(struct sha512_state), + .statesize = sizeof(struct sha512_state), + .base = { + .cra_name = "sha512", + .cra_driver_name = "sha512-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA512_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .digestsize = SHA384_DIGEST_SIZE, + .init = sha384_neon_init, + .update = sha512_neon_update, + .final = sha384_neon_final, + .export = sha512_neon_export, + .import = sha512_neon_import, + .descsize = sizeof(struct sha512_state), + .statesize = sizeof(struct sha512_state), + .base = { + .cra_name = "sha384", + .cra_driver_name = "sha384-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA384_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init sha512_neon_mod_init(void) +{ + if (!cpu_has_neon()) + return -ENODEV; + + return crypto_register_shashes(algs, ARRAY_SIZE(algs)); +} + +static void __exit sha512_neon_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); +} + +module_init(sha512_neon_mod_init); +module_exit(sha512_neon_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA512 Secure Hash Algorithm, NEON accelerated"); + +MODULE_ALIAS("sha512"); +MODULE_ALIAS("sha384"); diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 57f0584e8d97..f67fd3afebdf 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -24,6 +24,8 @@ #include <asm/domain.h> #include <asm/opcodes-virt.h> #include <asm/asm-offsets.h> +#include <asm/page.h> +#include <asm/thread_info.h> #define IOMEM(x) (x) @@ -179,10 +181,10 @@ * Get current thread_info. */ .macro get_thread_info, rd - ARM( mov \rd, sp, lsr #13 ) + ARM( mov \rd, sp, lsr #THREAD_SIZE_ORDER + PAGE_SHIFT ) THUMB( mov \rd, sp ) - THUMB( lsr \rd, \rd, #13 ) - mov \rd, \rd, lsl #13 + THUMB( lsr \rd, \rd, #THREAD_SIZE_ORDER + PAGE_SHIFT ) + mov \rd, \rd, lsl #THREAD_SIZE_ORDER + PAGE_SHIFT .endm /* @@ -425,4 +427,25 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) #endif .endm + .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo + .macro ret\c, reg +#if __LINUX_ARM_ARCH__ < 6 + mov\c pc, \reg +#else + .ifeqs "\reg", "lr" + bx\c \reg + .else + mov\c pc, \reg + .endif +#endif + .endm + .endr + + .macro ret.w, reg + ret \reg +#ifdef CONFIG_THUMB2_KERNEL + nop +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 8c2b7321a478..963a2515906d 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -62,17 +62,18 @@ #define ARM_CPU_IMP_ARM 0x41 #define ARM_CPU_IMP_INTEL 0x69 -#define ARM_CPU_PART_ARM1136 0xB360 -#define ARM_CPU_PART_ARM1156 0xB560 -#define ARM_CPU_PART_ARM1176 0xB760 -#define ARM_CPU_PART_ARM11MPCORE 0xB020 -#define ARM_CPU_PART_CORTEX_A8 0xC080 -#define ARM_CPU_PART_CORTEX_A9 0xC090 -#define ARM_CPU_PART_CORTEX_A5 0xC050 -#define ARM_CPU_PART_CORTEX_A15 0xC0F0 -#define ARM_CPU_PART_CORTEX_A7 0xC070 -#define ARM_CPU_PART_CORTEX_A12 0xC0D0 -#define ARM_CPU_PART_CORTEX_A17 0xC0E0 +/* ARM implemented processors */ +#define ARM_CPU_PART_ARM1136 0x4100b360 +#define ARM_CPU_PART_ARM1156 0x4100b560 +#define ARM_CPU_PART_ARM1176 0x4100b760 +#define ARM_CPU_PART_ARM11MPCORE 0x4100b020 +#define ARM_CPU_PART_CORTEX_A8 0x4100c080 +#define ARM_CPU_PART_CORTEX_A9 0x4100c090 +#define ARM_CPU_PART_CORTEX_A5 0x4100c050 +#define ARM_CPU_PART_CORTEX_A7 0x4100c070 +#define ARM_CPU_PART_CORTEX_A12 0x4100c0d0 +#define ARM_CPU_PART_CORTEX_A17 0x4100c0e0 +#define ARM_CPU_PART_CORTEX_A15 0x4100c0f0 #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 #define ARM_CPU_XSCALE_ARCH_V1 0x2000 @@ -171,14 +172,24 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void) return (read_cpuid_id() & 0xFF000000) >> 24; } -static inline unsigned int __attribute_const__ read_cpuid_part_number(void) +/* + * The CPU part number is meaningless without referring to the CPU + * implementer: implementers are free to define their own part numbers + * which are permitted to clash with other implementer part numbers. + */ +static inline unsigned int __attribute_const__ read_cpuid_part(void) +{ + return read_cpuid_id() & 0xff00fff0; +} + +static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void) { return read_cpuid_id() & 0xFFF0; } static inline unsigned int __attribute_const__ xscale_cpu_arch_version(void) { - return read_cpuid_part_number() & ARM_CPU_XSCALE_ARCH_MASK; + return read_cpuid_id() & ARM_CPU_XSCALE_ARCH_MASK; } static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) diff --git a/arch/arm/include/asm/crypto/sha1.h b/arch/arm/include/asm/crypto/sha1.h new file mode 100644 index 000000000000..75e6a417416b --- /dev/null +++ b/arch/arm/include/asm/crypto/sha1.h @@ -0,0 +1,10 @@ +#ifndef ASM_ARM_CRYPTO_SHA1_H +#define ASM_ARM_CRYPTO_SHA1_H + +#include <linux/crypto.h> +#include <crypto/sha.h> + +extern int sha1_update_arm(struct shash_desc *desc, const u8 *data, + unsigned int len); + +#endif diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index 88d61815f0c0..469a2b30fa27 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -35,5 +35,5 @@ \symbol_name: mov r8, lr arch_irq_handler_default - mov pc, r8 + ret r8 .endm diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h index 74a8b84f3cb1..74be7c22035a 100644 --- a/arch/arm/include/asm/glue-proc.h +++ b/arch/arm/include/asm/glue-proc.h @@ -221,15 +221,6 @@ # endif #endif -#ifdef CONFIG_CPU_V7 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v7 -# endif -#endif - #ifdef CONFIG_CPU_V7M # ifdef CPU_NAME # undef MULTI_CPU @@ -248,6 +239,15 @@ # endif #endif +#ifdef CONFIG_CPU_V7 +/* + * Cortex-A9 needs a different suspend/resume function, so we need + * multiple CPU support for ARMv7 anyway. + */ +# undef MULTI_CPU +# define MULTI_CPU +#endif + #ifndef MULTI_CPU #define cpu_proc_init __glue(CPU_NAME,_proc_init) #define cpu_proc_fin __glue(CPU_NAME,_proc_fin) diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 477e0206e016..504dcddebfcc 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -5,12 +5,6 @@ #define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO #endif -/* not all ARM platforms necessarily support this API ... */ -#ifdef CONFIG_NEED_MACH_GPIO_H -#include <mach/gpio.h> -#endif - -#ifndef __ARM_GPIOLIB_COMPLEX /* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */ #include <asm-generic/gpio.h> @@ -18,7 +12,6 @@ #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value #define gpio_cansleep __gpio_cansleep -#endif /* * Provide a default gpio_to_irq() which should satisfy every case. diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 53b3c4a50d5c..3a67bec72d0c 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -61,6 +61,24 @@ #define ARM_EXCEPTION_FIQ 6 #define ARM_EXCEPTION_HVC 7 +/* + * The rr_lo_hi macro swaps a pair of registers depending on + * current endianness. It is used in conjunction with ldrd and strd + * instructions that load/store a 64-bit value from/to memory to/from + * a pair of registers which are used with the mrrc and mcrr instructions. + * If used with the ldrd/strd instructions, the a1 parameter is the first + * source/destination register and the a2 parameter is the second + * source/destination register. Note that the ldrd/strd instructions + * already swap the bytes within the words correctly according to the + * endianness setting, but the order of the registers need to be effectively + * swapped when used with the mrrc/mcrr instructions. + */ +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define rr_lo_hi(a1, a2) a2, a1 +#else +#define rr_lo_hi(a1, a2) a1, a2 +#endif + #ifndef __ASSEMBLY__ struct kvm; struct kvm_vcpu; diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 0fa90c962ac8..69b746955fca 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -185,9 +185,16 @@ static inline unsigned long vcpu_data_guest_to_host(struct kvm_vcpu *vcpu, default: return be32_to_cpu(data); } + } else { + switch (len) { + case 1: + return data & 0xff; + case 2: + return le16_to_cpu(data & 0xffff); + default: + return le32_to_cpu(data); + } } - - return data; /* Leave LE untouched */ } static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu, @@ -203,9 +210,16 @@ static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu, default: return cpu_to_be32(data); } + } else { + switch (len) { + case 1: + return data & 0xff; + case 2: + return cpu_to_le16(data & 0xffff); + default: + return cpu_to_le32(data); + } } - - return data; /* Leave LE untouched */ } #endif /* __ARM_KVM_EMULATE_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 193ceaf01bfd..6dfb404f6c46 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -225,10 +225,12 @@ static inline int kvm_arch_dev_ioctl_check_extension(long ext) return 0; } +static inline void vgic_arch_setup(const struct vgic_params *vgic) +{ + BUG_ON(vgic->type != VGIC_V2); +} + int kvm_perf_init(void); int kvm_perf_teardown(void); -u64 kvm_arm_timer_get_reg(struct kvm_vcpu *, u64 regid); -int kvm_arm_timer_set_reg(struct kvm_vcpu *, u64 regid, u64 value); - #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 5c7aa3c1519f..5cc0b0f5f72f 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -127,6 +127,18 @@ static inline void kvm_set_s2pmd_writable(pmd_t *pmd) (__boundary - 1 < (end) - 1)? __boundary: (end); \ }) +static inline bool kvm_page_empty(void *ptr) +{ + struct page *ptr_page = virt_to_page(ptr); + return page_count(ptr_page) == 1; +} + + +#define kvm_pte_table_empty(ptep) kvm_page_empty(ptep) +#define kvm_pmd_table_empty(pmdp) kvm_page_empty(pmdp) +#define kvm_pud_table_empty(pudp) (0) + + struct kvm; #define kvm_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l)) diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 060a75e99263..0406cb3f1af7 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -50,6 +50,7 @@ struct machine_desc { struct smp_operations *smp; /* SMP operations */ bool (*smp_init)(void); void (*fixup)(struct tag *, char **); + void (*dt_fixup)(void); void (*init_meminfo)(void); void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 94060adba174..57ff7f2a3084 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -217,6 +217,22 @@ int __mcpm_cluster_state(unsigned int cluster); int __init mcpm_sync_init( void (*power_up_setup)(unsigned int affinity_level)); +/** + * mcpm_loopback - make a run through the MCPM low-level code + * + * @cache_disable: pointer to function performing cache disabling + * + * This exercises the MCPM machinery by soft resetting the CPU and branching + * to the MCPM low-level entry code before returning to the caller. + * The @cache_disable function must do the necessary cache disabling to + * let the regular kernel init code turn it back on as if the CPU was + * hotplugged in. The MCPM state machine is set as if the cluster was + * initialized meaning the power_up_setup callback passed to mcpm_sync_init() + * will be invoked for all affinity levels. This may be useful to initialize + * some resources such as enabling the CCI that requires the cache to be off, or simply for testing purposes. + */ +int __init mcpm_loopback(void (*cache_disable)(void)); + void __init mcpm_smp_set_ops(void); #else diff --git a/arch/arm/include/asm/mcs_spinlock.h b/arch/arm/include/asm/mcs_spinlock.h new file mode 100644 index 000000000000..f652ad65840a --- /dev/null +++ b/arch/arm/include/asm/mcs_spinlock.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MCS_LOCK_H +#define __ASM_MCS_LOCK_H + +#ifdef CONFIG_SMP +#include <asm/spinlock.h> + +/* MCS spin-locking. */ +#define arch_mcs_spin_lock_contended(lock) \ +do { \ + /* Ensure prior stores are observed before we enter wfe. */ \ + smp_mb(); \ + while (!(smp_load_acquire(lock))) \ + wfe(); \ +} while (0) \ + +#define arch_mcs_spin_unlock_contended(lock) \ +do { \ + smp_store_release(lock, 1); \ + dsb_sev(); \ +} while (0) + +#endif /* CONFIG_SMP */ +#endif /* __ASM_MCS_LOCK_H */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 2b751464d6ff..e731018869a7 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -91,9 +91,7 @@ * of this define that was meant to. * Fortunately, there is no reference for this in noMMU mode, for now. */ -#ifndef TASK_SIZE -#define TASK_SIZE (CONFIG_DRAM_SIZE) -#endif +#define TASK_SIZE UL(0xffffffff) #ifndef TASK_UNMAPPED_BASE #define TASK_UNMAPPED_BASE UL(0x00000000) @@ -150,13 +148,11 @@ /* * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical - * memory. This is used for XIP and NoMMU kernels, or by kernels which - * have their own mach/memory.h. Assembly code must always use + * memory. This is used for XIP and NoMMU kernels, and on platforms that don't + * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use * PLAT_PHYS_OFFSET and not PHYS_OFFSET. */ -#ifndef PLAT_PHYS_OFFSET #define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) -#endif #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 755877527cf9..c3a83691af8e 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -12,15 +12,6 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -/* - * The ARMv7 CPU PMU supports up to 32 event counters. - */ -#define ARMPMU_MAX_HWEVENTS 32 - -#define HW_OP_UNSUPPORTED 0xFFFF -#define C(_x) PERF_COUNT_HW_CACHE_##_x -#define CACHE_OP_UNSUPPORTED 0xFFFF - #ifdef CONFIG_HW_PERF_EVENTS struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index 626989fec4d3..9fd61c72a33a 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -43,7 +43,7 @@ #define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2) #define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3) #define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */ -#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */ +#define PMD_SECT_AP2 (_AT(pmdval_t, 1) << 7) /* read only */ #define PMD_SECT_S (_AT(pmdval_t, 3) << 8) #define PMD_SECT_AF (_AT(pmdval_t, 1) << 10) #define PMD_SECT_nG (_AT(pmdval_t, 1) << 11) @@ -72,6 +72,7 @@ #define PTE_TABLE_BIT (_AT(pteval_t, 1) << 1) #define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */ #define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */ +#define PTE_AP2 (_AT(pteval_t, 1) << 7) /* AP[2] */ #define PTE_EXT_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ #define PTE_EXT_AF (_AT(pteval_t, 1) << 10) /* Access Flag */ #define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* nG */ diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 85c60adc8b60..06e0bc0f8b00 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -79,18 +79,19 @@ #define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Present */ #define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ #define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */ -#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) /* AP[2] */ #define L_PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ #define L_PTE_YOUNG (_AT(pteval_t, 1) << 10) /* AF */ #define L_PTE_XN (_AT(pteval_t, 1) << 54) /* XN */ -#define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) /* unused */ -#define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */ +#define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) +#define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) #define L_PTE_NONE (_AT(pteval_t, 1) << 57) /* PROT_NONE */ +#define L_PTE_RDONLY (_AT(pteval_t, 1) << 58) /* READ ONLY */ -#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0) -#define PMD_SECT_DIRTY (_AT(pmdval_t, 1) << 55) -#define PMD_SECT_SPLITTING (_AT(pmdval_t, 1) << 56) -#define PMD_SECT_NONE (_AT(pmdval_t, 1) << 57) +#define L_PMD_SECT_VALID (_AT(pmdval_t, 1) << 0) +#define L_PMD_SECT_DIRTY (_AT(pmdval_t, 1) << 55) +#define L_PMD_SECT_SPLITTING (_AT(pmdval_t, 1) << 56) +#define L_PMD_SECT_NONE (_AT(pmdval_t, 1) << 57) +#define L_PMD_SECT_RDONLY (_AT(pteval_t, 1) << 58) /* * To be used in assembly code with the upper page attributes. @@ -207,27 +208,32 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) #define pte_huge(pte) (pte_val(pte) && !(pte_val(pte) & PTE_TABLE_BIT)) #define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT)) -#define pmd_young(pmd) (pmd_val(pmd) & PMD_SECT_AF) +#define pmd_isset(pmd, val) ((u32)(val) == (val) ? pmd_val(pmd) & (val) \ + : !!(pmd_val(pmd) & (val))) +#define pmd_isclear(pmd, val) (!(pmd_val(pmd) & (val))) + +#define pmd_young(pmd) (pmd_isset((pmd), PMD_SECT_AF)) #define __HAVE_ARCH_PMD_WRITE -#define pmd_write(pmd) (!(pmd_val(pmd) & PMD_SECT_RDONLY)) +#define pmd_write(pmd) (pmd_isclear((pmd), L_PMD_SECT_RDONLY)) +#define pmd_dirty(pmd) (pmd_isset((pmd), L_PMD_SECT_DIRTY)) #define pmd_hugewillfault(pmd) (!pmd_young(pmd) || !pmd_write(pmd)) #define pmd_thp_or_huge(pmd) (pmd_huge(pmd) || pmd_trans_huge(pmd)) #ifdef CONFIG_TRANSPARENT_HUGEPAGE -#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT)) -#define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING) +#define pmd_trans_huge(pmd) (pmd_val(pmd) && !pmd_table(pmd)) +#define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING)) #endif #define PMD_BIT_FUNC(fn,op) \ static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; } -PMD_BIT_FUNC(wrprotect, |= PMD_SECT_RDONLY); +PMD_BIT_FUNC(wrprotect, |= L_PMD_SECT_RDONLY); PMD_BIT_FUNC(mkold, &= ~PMD_SECT_AF); -PMD_BIT_FUNC(mksplitting, |= PMD_SECT_SPLITTING); -PMD_BIT_FUNC(mkwrite, &= ~PMD_SECT_RDONLY); -PMD_BIT_FUNC(mkdirty, |= PMD_SECT_DIRTY); +PMD_BIT_FUNC(mksplitting, |= L_PMD_SECT_SPLITTING); +PMD_BIT_FUNC(mkwrite, &= ~L_PMD_SECT_RDONLY); +PMD_BIT_FUNC(mkdirty, |= L_PMD_SECT_DIRTY); PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF); #define pmd_mkhuge(pmd) (__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT)) @@ -241,8 +247,8 @@ PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF); static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) { - const pmdval_t mask = PMD_SECT_USER | PMD_SECT_XN | PMD_SECT_RDONLY | - PMD_SECT_VALID | PMD_SECT_NONE; + const pmdval_t mask = PMD_SECT_USER | PMD_SECT_XN | L_PMD_SECT_RDONLY | + L_PMD_SECT_VALID | L_PMD_SECT_NONE; pmd_val(pmd) = (pmd_val(pmd) & ~mask) | (pgprot_val(newprot) & mask); return pmd; } @@ -253,8 +259,13 @@ static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr, BUG_ON(addr >= TASK_SIZE); /* create a faulting entry if PROT_NONE protected */ - if (pmd_val(pmd) & PMD_SECT_NONE) - pmd_val(pmd) &= ~PMD_SECT_VALID; + if (pmd_val(pmd) & L_PMD_SECT_NONE) + pmd_val(pmd) &= ~L_PMD_SECT_VALID; + + if (pmd_write(pmd) && pmd_dirty(pmd)) + pmd_val(pmd) &= ~PMD_SECT_AP2; + else + pmd_val(pmd) |= PMD_SECT_AP2; *pmdp = __pmd(pmd_val(pmd) | PMD_SECT_nG); flush_pmd_entry(pmdp); diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 5478e5d6ad89..01baef07cd0c 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -214,18 +214,22 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_isset(pte, val) ((u32)(val) == (val) ? pte_val(pte) & (val) \ + : !!(pte_val(pte) & (val))) +#define pte_isclear(pte, val) (!(pte_val(pte) & (val))) + #define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_valid(pte) (pte_val(pte) & L_PTE_VALID) +#define pte_present(pte) (pte_isset((pte), L_PTE_PRESENT)) +#define pte_valid(pte) (pte_isset((pte), L_PTE_VALID)) #define pte_accessible(mm, pte) (mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte)) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_write(pte) (pte_isclear((pte), L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_isset((pte), L_PTE_DIRTY)) +#define pte_young(pte) (pte_isset((pte), L_PTE_YOUNG)) +#define pte_exec(pte) (pte_isclear((pte), L_PTE_XN)) #define pte_special(pte) (0) #define pte_valid_user(pte) \ - (pte_valid(pte) && (pte_val(pte) & L_PTE_USER) && pte_young(pte)) + (pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte)) #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index ae1919be8f98..0b648c541293 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -42,6 +42,25 @@ struct arm_pmu_platdata { #ifdef CONFIG_HW_PERF_EVENTS +/* + * The ARMv7 CPU PMU supports up to 32 event counters. + */ +#define ARMPMU_MAX_HWEVENTS 32 + +#define HW_OP_UNSUPPORTED 0xFFFF +#define C(_x) PERF_COUNT_HW_CACHE_##_x +#define CACHE_OP_UNSUPPORTED 0xFFFF + +#define PERF_MAP_ALL_UNSUPPORTED \ + [0 ... PERF_COUNT_HW_MAX - 1] = HW_OP_UNSUPPORTED + +#define PERF_CACHE_MAP_ALL_UNSUPPORTED \ +[0 ... C(MAX) - 1] = { \ + [0 ... C(OP_MAX) - 1] = { \ + [0 ... C(RESULT_MAX) - 1] = CACHE_OP_UNSUPPORTED, \ + }, \ +} + /* The events for a given PMU register set. */ struct pmu_hw_events { /* diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index c3d5fc124a05..8a1e8e995dae 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -82,6 +82,8 @@ unsigned long get_wchan(struct task_struct *p); #define cpu_relax() barrier() #endif +#define cpu_relax_lowlatency() cpu_relax() + #define task_pt_regs(p) \ ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index c877654fe3bf..601264d983fa 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -84,6 +84,12 @@ static inline long regs_return_value(struct pt_regs *regs) #define instruction_pointer(regs) (regs)->ARM_pc +#ifdef CONFIG_THUMB2_KERNEL +#define frame_pointer(regs) (regs)->ARM_r7 +#else +#define frame_pointer(regs) (regs)->ARM_fp +#endif + static inline void instruction_pointer_set(struct pt_regs *regs, unsigned long val) { diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h index 0393fbab8dd5..bfe163c40024 100644 --- a/arch/arm/include/asm/smp_scu.h +++ b/arch/arm/include/asm/smp_scu.h @@ -11,7 +11,7 @@ static inline bool scu_a9_has_base(void) { - return read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; + return read_cpuid_part() == ARM_CPU_PART_CORTEX_A9; } static inline unsigned long scu_a9_get_base(void) diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h index 4d0a16441b29..7722201ead19 100644 --- a/arch/arm/include/asm/stacktrace.h +++ b/arch/arm/include/asm/stacktrace.h @@ -1,13 +1,28 @@ #ifndef __ASM_STACKTRACE_H #define __ASM_STACKTRACE_H +#include <asm/ptrace.h> + struct stackframe { + /* + * FP member should hold R7 when CONFIG_THUMB2_KERNEL is enabled + * and R11 otherwise. + */ unsigned long fp; unsigned long sp; unsigned long lr; unsigned long pc; }; +static __always_inline +void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame) +{ + frame->fp = frame_pointer(regs); + frame->sp = regs->ARM_sp; + frame->lr = regs->ARM_lr; + frame->pc = regs->ARM_pc; +} + extern int unwind_frame(struct stackframe *frame); extern void walk_stackframe(struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data); diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index e4e4208a9130..fc44d3761f9e 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -14,9 +14,10 @@ #include <linux/compiler.h> #include <asm/fpstate.h> +#include <asm/page.h> #define THREAD_SIZE_ORDER 1 -#define THREAD_SIZE 8192 +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) #define THREAD_START_SP (THREAD_SIZE - 8) #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 75d95799b6e6..a4cd7af475e9 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -107,6 +107,8 @@ static inline void set_fs(mm_segment_t fs) extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); +extern int __get_user_lo8(void *); +extern int __get_user_8(void *); #define __GUP_CLOBBER_1 "lr", "cc" #ifdef CONFIG_CPU_USE_DOMAINS @@ -115,6 +117,8 @@ extern int __get_user_4(void *); #define __GUP_CLOBBER_2 "lr", "cc" #endif #define __GUP_CLOBBER_4 "lr", "cc" +#define __GUP_CLOBBER_lo8 "lr", "cc" +#define __GUP_CLOBBER_8 "lr", "cc" #define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ @@ -125,11 +129,19 @@ extern int __get_user_4(void *); : "0" (__p), "r" (__l) \ : __GUP_CLOBBER_##__s) +/* narrowing a double-word get into a single 32bit word register: */ +#ifdef __ARMEB__ +#define __get_user_xb(__r2, __p, __e, __l, __s) \ + __get_user_x(__r2, __p, __e, __l, lo8) +#else +#define __get_user_xb __get_user_x +#endif + #define __get_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ - register unsigned long __r2 asm("r2"); \ + register typeof(x) __r2 asm("r2"); \ register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ @@ -142,6 +154,12 @@ extern int __get_user_4(void *); case 4: \ __get_user_x(__r2, __p, __e, __l, 4); \ break; \ + case 8: \ + if (sizeof((x)) < 8) \ + __get_user_xb(__r2, __p, __e, __l, 4); \ + else \ + __get_user_x(__r2, __p, __e, __l, 8); \ + break; \ default: __e = __get_user_bad(); break; \ } \ x = (typeof(*(p))) __r2; \ @@ -224,7 +242,7 @@ static inline void set_fs(mm_segment_t fs) #define access_ok(type,addr,size) (__range_ok(addr,size) == 0) #define user_addr_max() \ - (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) + (segment_eq(get_fs(), KERNEL_DS) ? ~0UL : get_fs()) /* * The "__xxx" versions of the user access functions do not verify the diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 43876245fc57..21ca0cebcab0 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -15,7 +15,17 @@ #include <uapi/asm/unistd.h> +/* + * This may need to be greater than __NR_last_syscall+1 in order to + * account for the padding in the syscall table + */ #define __NR_syscalls (384) + +/* + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ #define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) #define __ARCH_WANT_STAT64 diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S new file mode 100644 index 000000000000..abe225436686 --- /dev/null +++ b/arch/arm/include/debug/clps711x.S @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef CONFIG_DEBUG_CLPS711X_UART2 +#define CLPS711X_UART_PADDR (0x80000000 + 0x0000) +#define CLPS711X_UART_VADDR (0xfeff0000 + 0x0000) +#else +#define CLPS711X_UART_PADDR (0x80000000 + 0x1000) +#define CLPS711X_UART_VADDR (0xfeff0000 + 0x1000) +#endif + +#define SYSFLG (0x0140) +#define SYSFLG_UBUSY (1 << 11) +#define UARTDR (0x0480) + + .macro addruart, rp, rv, tmp + ldr \rv, =CLPS711X_UART_VADDR + ldr \rp, =CLPS711X_UART_PADDR + .endm + + .macro waituart,rd,rx + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #UARTDR] + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #SYSFLG] + tst \rd, #SYSFLG_UBUSY + bne 1001b + .endm diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/include/debug/s5pv210.S index 30b511a580aa..4f1a73e2c1a1 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/include/debug/s5pv210.S @@ -1,9 +1,6 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,8 +9,9 @@ /* pull in the relevant register and map files. */ -#include <linux/serial_s3c.h> -#include <mach/map.h> +#define S3C_ADDR_BASE 0xF6000000 +#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000 +#define S5PV210_PA_UART 0xe2900000 /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 @@ -22,8 +20,8 @@ */ .macro addruart, rp, rv, tmp - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART + ldr \rp, =S5PV210_PA_UART + ldr \rv, =S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) @@ -33,9 +31,4 @@ #define fifo_full fifo_full_s5pv210 #define fifo_level fifo_level_s5pv210 -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - #include <debug/samsung.S> diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index ba94446c72d9..767ea204334e 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -409,11 +409,7 @@ #define __NR_sched_setattr (__NR_SYSCALL_BASE+380) #define __NR_sched_getattr (__NR_SYSCALL_BASE+381) #define __NR_renameat2 (__NR_SYSCALL_BASE+382) - -/* - * This may need to be greater than __NR_last_syscall+1 in order to - * account for the padding in the syscall table - */ +#define __NR_seccomp (__NR_SYSCALL_BASE+383) /* * The following SWIs are ARM private. @@ -426,12 +422,6 @@ #define __ARM_NR_set_tls (__ARM_NR_BASE+5) /* - * *NOTE*: This is a ghost syscall private to the kernel. Only the - * __kuser_cmpxchg code in entry-armv.S should be aware of its - * existence. Don't ever use this from user code. - */ - -/* * The following syscalls are obsolete and no longer available for EABI. */ #if !defined(__KERNEL__) diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 85598b5d1efd..713e807621d2 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -182,13 +182,13 @@ int main(void) DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.fault.hyp_pc)); #ifdef CONFIG_KVM_ARM_VGIC DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); - DEFINE(VGIC_CPU_HCR, offsetof(struct vgic_cpu, vgic_hcr)); - DEFINE(VGIC_CPU_VMCR, offsetof(struct vgic_cpu, vgic_vmcr)); - DEFINE(VGIC_CPU_MISR, offsetof(struct vgic_cpu, vgic_misr)); - DEFINE(VGIC_CPU_EISR, offsetof(struct vgic_cpu, vgic_eisr)); - DEFINE(VGIC_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_elrsr)); - DEFINE(VGIC_CPU_APR, offsetof(struct vgic_cpu, vgic_apr)); - DEFINE(VGIC_CPU_LR, offsetof(struct vgic_cpu, vgic_lr)); + DEFINE(VGIC_V2_CPU_HCR, offsetof(struct vgic_cpu, vgic_v2.vgic_hcr)); + DEFINE(VGIC_V2_CPU_VMCR, offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr)); + DEFINE(VGIC_V2_CPU_MISR, offsetof(struct vgic_cpu, vgic_v2.vgic_misr)); + DEFINE(VGIC_V2_CPU_EISR, offsetof(struct vgic_cpu, vgic_v2.vgic_eisr)); + DEFINE(VGIC_V2_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr)); + DEFINE(VGIC_V2_CPU_APR, offsetof(struct vgic_cpu, vgic_v2.vgic_apr)); + DEFINE(VGIC_V2_CPU_LR, offsetof(struct vgic_cpu, vgic_v2.vgic_lr)); DEFINE(VGIC_CPU_NR_LR, offsetof(struct vgic_cpu, nr_lr)); #ifdef CONFIG_KVM_ARM_TIMER DEFINE(VCPU_TIMER_CNTV_CTL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl)); diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 8f51bdcdacbb..bea85f97f363 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -392,6 +392,7 @@ /* 380 */ CALL(sys_sched_setattr) CALL(sys_sched_getattr) CALL(sys_renameat2) + CALL(sys_seccomp) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 14f7c3b14632..78c91b5f97d4 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -90,7 +90,7 @@ ENTRY(printascii) ldrneb r1, [r0], #1 teqne r1, #0 bne 1b - mov pc, lr + ret lr ENDPROC(printascii) ENTRY(printch) @@ -105,7 +105,7 @@ ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] - mov pc, lr + ret lr ENDPROC(debug_ll_addr) #endif @@ -116,7 +116,7 @@ ENTRY(printascii) mov r0, #0x04 @ SYS_WRITE0 ARM( svc #0x123456 ) THUMB( svc #0xab ) - mov pc, lr + ret lr ENDPROC(printascii) ENTRY(printch) @@ -125,14 +125,14 @@ ENTRY(printch) mov r0, #0x03 @ SYS_WRITEC ARM( svc #0x123456 ) THUMB( svc #0xab ) - mov pc, lr + ret lr ENDPROC(printch) ENTRY(debug_ll_addr) mov r2, #0 str r2, [r0] str r2, [r1] - mov pc, lr + ret lr ENDPROC(debug_ll_addr) #endif diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index e94a157ddff1..11c54de9f8cf 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -212,7 +212,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) mdesc_best = &__mach_desc_GENERIC_DT; #endif - if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys))) + if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys))) return NULL; mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach); @@ -237,6 +237,12 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) dump_machine_table(); /* does not return */ } + /* We really don't want to do this, but sometimes firmware provides buggy data */ + if (mdesc->dt_fixup) + mdesc->dt_fixup(); + + early_init_dt_scan_nodes(); + /* Change machine number to match the mdesc we're using */ __machine_arch_type = mdesc->nr; diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 52a949a8077d..36276cdccfbc 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -224,7 +224,7 @@ svc_preempt: 1: bl preempt_schedule_irq @ irq en/disable is done inside ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS tst r0, #_TIF_NEED_RESCHED - moveq pc, r8 @ go again + reteq r8 @ go again b 1b #endif @@ -490,7 +490,7 @@ ENDPROC(__und_usr) .pushsection .fixup, "ax" .align 2 4: str r4, [sp, #S_PC] @ retry current instruction - mov pc, r9 + ret r9 .popsection .pushsection __ex_table,"a" .long 1b, 4b @@ -552,7 +552,7 @@ call_fpe: #endif tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 - moveq pc, lr + reteq lr and r8, r0, #0x00000f00 @ mask out CP number THUMB( lsr r8, r8, #8 ) mov r7, #1 @@ -571,33 +571,33 @@ call_fpe: THUMB( add pc, r8 ) nop - movw_pc lr @ CP#0 + ret.w lr @ CP#0 W(b) do_fpe @ CP#1 (FPE) W(b) do_fpe @ CP#2 (FPE) - movw_pc lr @ CP#3 + ret.w lr @ CP#3 #ifdef CONFIG_CRUNCH b crunch_task_enable @ CP#4 (MaverickCrunch) b crunch_task_enable @ CP#5 (MaverickCrunch) b crunch_task_enable @ CP#6 (MaverickCrunch) #else - movw_pc lr @ CP#4 - movw_pc lr @ CP#5 - movw_pc lr @ CP#6 + ret.w lr @ CP#4 + ret.w lr @ CP#5 + ret.w lr @ CP#6 #endif - movw_pc lr @ CP#7 - movw_pc lr @ CP#8 - movw_pc lr @ CP#9 + ret.w lr @ CP#7 + ret.w lr @ CP#8 + ret.w lr @ CP#9 #ifdef CONFIG_VFP W(b) do_vfp @ CP#10 (VFP) W(b) do_vfp @ CP#11 (VFP) #else - movw_pc lr @ CP#10 (VFP) - movw_pc lr @ CP#11 (VFP) + ret.w lr @ CP#10 (VFP) + ret.w lr @ CP#11 (VFP) #endif - movw_pc lr @ CP#12 - movw_pc lr @ CP#13 - movw_pc lr @ CP#14 (Debug) - movw_pc lr @ CP#15 (Control) + ret.w lr @ CP#12 + ret.w lr @ CP#13 + ret.w lr @ CP#14 (Debug) + ret.w lr @ CP#15 (Control) #ifdef NEED_CPU_ARCHITECTURE .align 2 @@ -649,7 +649,7 @@ ENTRY(fp_enter) .popsection ENTRY(no_fp) - mov pc, lr + ret lr ENDPROC(no_fp) __und_usr_fault_32: @@ -745,7 +745,7 @@ ENDPROC(__switch_to) #ifdef CONFIG_ARM_THUMB bx \reg #else - mov pc, \reg + ret \reg #endif .endm @@ -837,7 +837,7 @@ kuser_cmpxchg64_fixup: #if __LINUX_ARM_ARCH__ < 6 bcc kuser_cmpxchg32_fixup #endif - mov pc, lr + ret lr .previous #else @@ -905,7 +905,7 @@ kuser_cmpxchg32_fixup: subs r8, r4, r7 rsbcss r8, r8, #(2b - 1b) strcs r7, [sp, #S_PC] - mov pc, lr + ret lr .previous #else diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 7139d4a7dea7..e52fe5a2d843 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <asm/assembler.h> #include <asm/unistd.h> #include <asm/ftrace.h> #include <asm/unwind.h> @@ -88,7 +89,7 @@ ENTRY(ret_from_fork) cmp r5, #0 movne r0, r4 adrne lr, BSYM(1f) - movne pc, r5 + retne r5 1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) @@ -290,7 +291,7 @@ ENDPROC(ftrace_graph_caller_old) .macro mcount_exit ldmia sp!, {r0-r3, ip, lr} - mov pc, ip + ret ip .endm ENTRY(__gnu_mcount_nc) @@ -298,7 +299,7 @@ UNWIND(.fnstart) #ifdef CONFIG_DYNAMIC_FTRACE mov ip, lr ldmia sp!, {lr} - mov pc, ip + ret ip #else __mcount #endif @@ -333,12 +334,12 @@ return_to_handler: bl ftrace_return_to_handler mov lr, r0 @ r0 has real ret addr ldmia sp!, {r0-r3} - mov pc, lr + ret lr #endif ENTRY(ftrace_stub) .Lftrace_stub: - mov pc, lr + ret lr ENDPROC(ftrace_stub) #endif /* CONFIG_FUNCTION_TRACER */ @@ -561,7 +562,7 @@ sys_mmap2: streq r5, [sp, #4] beq sys_mmap_pgoff mov r0, #-EINVAL - mov pc, lr + ret lr #else str r5, [sp, #4] b sys_mmap_pgoff diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 5d702f8900b1..8db307d0954b 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -240,12 +240,6 @@ movs pc, lr @ return & move spsr_svc into cpsr .endm - @ - @ 32-bit wide "mov pc, reg" - @ - .macro movw_pc, reg - mov pc, \reg - .endm #else /* CONFIG_THUMB2_KERNEL */ .macro svc_exit, rpsr, irq = 0 .if \irq != 0 @@ -304,14 +298,6 @@ movs pc, lr @ return & move spsr_svc into cpsr .endm #endif /* ifdef CONFIG_CPU_V7M / else */ - - @ - @ 32-bit wide "mov pc, reg" - @ - .macro movw_pc, reg - mov pc, \reg - nop - .endm #endif /* !CONFIG_THUMB2_KERNEL */ /* diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S index 207f9d652010..8dd26e1a9bd6 100644 --- a/arch/arm/kernel/fiqasm.S +++ b/arch/arm/kernel/fiqasm.S @@ -32,7 +32,7 @@ ENTRY(__set_fiq_regs) ldr lr, [r0] msr cpsr_c, r1 @ return to SVC mode mov r0, r0 @ avoid hazard prior to ARMv4 - mov pc, lr + ret lr ENDPROC(__set_fiq_regs) ENTRY(__get_fiq_regs) @@ -45,5 +45,5 @@ ENTRY(__get_fiq_regs) str lr, [r0] msr cpsr_c, r1 @ return to SVC mode mov r0, r0 @ avoid hazard prior to ARMv4 - mov pc, lr + ret lr ENDPROC(__get_fiq_regs) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 572a38335c96..8733012d231f 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -10,6 +10,7 @@ * published by the Free Software Foundation. * */ +#include <asm/assembler.h> #define ATAG_CORE 0x54410001 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) @@ -61,10 +62,10 @@ __vet_atags: cmp r5, r6 bne 1f -2: mov pc, lr @ atag/dtb pointer is ok +2: ret lr @ atag/dtb pointer is ok 1: mov r2, #0 - mov pc, lr + ret lr ENDPROC(__vet_atags) /* @@ -162,7 +163,7 @@ __lookup_processor_type: cmp r5, r6 blo 1b mov r5, #0 @ unknown processor -2: mov pc, lr +2: ret lr ENDPROC(__lookup_processor_type) /* diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 716249cc2ee1..cc176b67c134 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -82,7 +82,7 @@ ENTRY(stext) adr lr, BSYM(1f) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) 1: b __after_proc_init ENDPROC(stext) @@ -119,7 +119,7 @@ ENTRY(secondary_startup) mov r13, r12 @ __secondary_switched address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) ENDPROC(secondary_startup) ENTRY(__secondary_switched) @@ -164,7 +164,7 @@ __after_proc_init: #endif mcr p15, 0, r0, c1, c0, 0 @ write control reg #endif /* CONFIG_CPU_CP15 */ - mov pc, r13 + ret r13 ENDPROC(__after_proc_init) .ltorg @@ -254,7 +254,7 @@ ENTRY(__setup_mpu) orr r0, r0, #CR_M @ Set SCTRL.M (MPU on) mcr p15, 0, r0, c1, c0, 0 @ Enable MPU isb - mov pc,lr + ret lr ENDPROC(__setup_mpu) #endif #include "head-common.S" diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 2c35f0ff2fdc..664eee8c4a26 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -140,7 +140,7 @@ ENTRY(stext) mov r8, r4 @ set TTBR1 to swapper_pg_dir ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) 1: b __enable_mmu ENDPROC(stext) .ltorg @@ -335,7 +335,7 @@ __create_page_tables: sub r4, r4, #0x1000 @ point to the PGD table mov r4, r4, lsr #ARCH_PGD_SHIFT #endif - mov pc, lr + ret lr ENDPROC(__create_page_tables) .ltorg .align @@ -383,7 +383,7 @@ ENTRY(secondary_startup) ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor @ (return control reg) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) ENDPROC(secondary_startup) /* @@ -468,7 +468,7 @@ ENTRY(__turn_mmu_on) instr_sync mov r3, r3 mov r3, r13 - mov pc, r3 + ret r3 __turn_mmu_on_end: ENDPROC(__turn_mmu_on) .popsection @@ -487,7 +487,7 @@ __fixup_smp: orr r4, r4, #0x0000b000 orr r4, r4, #0x00000020 @ val 0x4100b020 teq r3, r4 @ ARM 11MPCore? - moveq pc, lr @ yes, assume SMP + reteq lr @ yes, assume SMP mrc p15, 0, r0, c0, c0, 5 @ read MPIDR and r0, r0, #0xc0000000 @ multiprocessing extensions and @@ -500,7 +500,7 @@ __fixup_smp: orr r4, r4, #0x0000c000 orr r4, r4, #0x00000090 teq r3, r4 @ Check for ARM Cortex-A9 - movne pc, lr @ Not ARM Cortex-A9, + retne lr @ Not ARM Cortex-A9, @ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the @ below address check will need to be #ifdef'd or equivalent @@ -512,7 +512,7 @@ __fixup_smp: ARM_BE8(rev r0, r0) @ byteswap if big endian and r0, r0, #0x3 @ number of CPUs teq r0, #0x0 @ is 1? - movne pc, lr + retne lr __fixup_smp_on_up: adr r0, 1f @@ -539,7 +539,7 @@ smp_on_up: .text __do_fixup_smp_on_up: cmp r4, r5 - movhs pc, lr + reths lr ldmia r4!, {r0, r6} ARM( str r6, [r0, r3] ) THUMB( add r0, r0, r3 ) @@ -672,7 +672,7 @@ ARM_BE8(rev16 ip, ip) 2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot bcc 1b - mov pc, lr + ret lr #endif ENDPROC(__fixup_a_pv_table) diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 797b1a6a4906..2a55373f49bf 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary) * immediately. */ compare_cpu_mode_with_primary r4, r5, r6, r7 - movne pc, lr + retne lr /* * Once we have given up on one CPU, we do not try to install the @@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary) */ cmp r4, #HYP_MODE - movne pc, lr @ give up if the CPU is not in HYP mode + retne lr @ give up if the CPU is not in HYP mode /* * Configure HSCTLR to set correct exception endianness/instruction set @@ -134,9 +134,7 @@ ENTRY(__hyp_stub_install_secondary) mcr p15, 4, r7, c1, c1, 3 @ HSTR THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE -#ifdef CONFIG_CPU_BIG_ENDIAN - orr r7, #(1 << 9) @ HSCTLR.EE -#endif +ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE mcr p15, 4, r7, c1, c0, 0 @ HSCTLR mrc p15, 4, r7, c1, c1, 1 @ HDCR @@ -201,7 +199,7 @@ ENDPROC(__hyp_get_vectors) @ fall through ENTRY(__hyp_set_vectors) __HVC(0) - mov pc, lr + ret lr ENDPROC(__hyp_set_vectors) #ifndef ZIMAGE diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index a5599cfc43cb..ad58e565fe98 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -94,13 +94,19 @@ ENTRY(iwmmxt_task_enable) mrc p15, 0, r2, c2, c0, 0 mov r2, r2 @ cpwait + bl concan_save - teq r1, #0 @ test for last ownership - mov lr, r9 @ normal exit from exception - beq concan_load @ no owner, skip save +#ifdef CONFIG_PREEMPT_COUNT + get_thread_info r10 +#endif +4: dec_preempt_count r10, r3 + ret r9 @ normal exit from exception concan_save: + teq r1, #0 @ test for last ownership + beq concan_load @ no owner, skip save + tmrc r2, wCon @ CUP? wCx @@ -138,7 +144,7 @@ concan_dump: wstrd wR15, [r1, #MMX_WR15] 2: teq r0, #0 @ anything to load? - beq 3f + reteq lr @ if not, return concan_load: @@ -171,15 +177,10 @@ concan_load: @ clear CUP/MUP (only if r1 != 0) teq r1, #0 mov r2, #0 - beq 3f - tmcr wCon, r2 + reteq lr -3: -#ifdef CONFIG_PREEMPT_COUNT - get_thread_info r10 -#endif -4: dec_preempt_count r10, r3 - mov pc, lr + tmcr wCon, r2 + ret lr /* * Back up Concan regs to save area and disable access to them @@ -265,7 +266,7 @@ ENTRY(iwmmxt_task_copy) mov r3, lr @ preserve return address bl concan_dump msr cpsr_c, ip @ restore interrupt mode - mov pc, r3 + ret r3 /* * Restore Concan state from given memory address @@ -301,7 +302,7 @@ ENTRY(iwmmxt_task_restore) mov r3, lr @ preserve return address bl concan_load msr cpsr_c, ip @ restore interrupt mode - mov pc, r3 + ret r3 /* * Concan handling on task switch @@ -323,7 +324,7 @@ ENTRY(iwmmxt_task_switch) add r3, r0, #TI_IWMMXT_STATE @ get next task Concan save area ldr r2, [r2] @ get current Concan owner teq r2, r3 @ next task owns it? - movne pc, lr @ no: leave Concan disabled + retne lr @ no: leave Concan disabled 1: @ flip Concan access XSC(eor r1, r1, #0x3) @@ -350,7 +351,7 @@ ENTRY(iwmmxt_task_release) eors r0, r0, r1 @ if equal... streq r0, [r3] @ then clear ownership msr cpsr_c, r2 @ restore interrupts - mov pc, lr + ret lr .data concan_owner: diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index 778c2f7024ff..a74b53c1b7df 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -160,12 +160,16 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr) static struct undef_hook kgdb_brkpt_hook = { .instr_mask = 0xffffffff, .instr_val = KGDB_BREAKINST, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, .fn = kgdb_brk_fn }; static struct undef_hook kgdb_compiled_brkpt_hook = { .instr_mask = 0xffffffff, .instr_val = KGDB_COMPILED_BREAK, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, .fn = kgdb_compiled_brk_fn }; diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 4238bcba9d60..266cba46db3e 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -560,11 +560,16 @@ user_backtrace(struct frame_tail __user *tail, struct perf_callchain_entry *entry) { struct frame_tail buftail; + unsigned long err; - /* Also check accessibility of one struct frame_tail beyond */ if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) return NULL; - if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail))) + + pagefault_disable(); + err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail)); + pagefault_enable(); + + if (err) return NULL; perf_callchain_store(entry, buftail.lr); @@ -590,6 +595,10 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) } perf_callchain_store(entry, regs->ARM_pc); + + if (!current->mm) + return; + tail = (struct frame_tail __user *)regs->ARM_fp - 1; while ((entry->nr < PERF_MAX_STACK_DEPTH) && @@ -621,10 +630,7 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) return; } - fr.fp = regs->ARM_fp; - fr.sp = regs->ARM_sp; - fr.lr = regs->ARM_lr; - fr.pc = regs->ARM_pc; + arm_get_current_stackframe(regs, &fr); walk_stackframe(&fr, callchain_trace, entry); } diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index af9e35e8836f..e6a6edbec613 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -233,14 +233,17 @@ static struct of_device_id cpu_pmu_of_device_ids[] = { {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init}, {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init}, {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, - {.compatible = "arm,arm1176-pmu", .data = armv6pmu_init}, - {.compatible = "arm,arm1136-pmu", .data = armv6pmu_init}, + {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, + {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, {.compatible = "qcom,krait-pmu", .data = krait_pmu_init}, {}, }; static struct platform_device_id cpu_pmu_plat_device_ids[] = { {.name = "arm-pmu"}, + {.name = "armv6-pmu"}, + {.name = "armv7-pmu"}, + {.name = "xscale-pmu"}, {}, }; @@ -250,40 +253,43 @@ static struct platform_device_id cpu_pmu_plat_device_ids[] = { static int probe_current_pmu(struct arm_pmu *pmu) { int cpu = get_cpu(); - unsigned long implementor = read_cpuid_implementor(); - unsigned long part_number = read_cpuid_part_number(); int ret = -ENODEV; pr_info("probing PMU on CPU %d\n", cpu); + switch (read_cpuid_part()) { /* ARM Ltd CPUs. */ - if (implementor == ARM_CPU_IMP_ARM) { - switch (part_number) { - case ARM_CPU_PART_ARM1136: - case ARM_CPU_PART_ARM1156: - case ARM_CPU_PART_ARM1176: - ret = armv6pmu_init(pmu); - break; - case ARM_CPU_PART_ARM11MPCORE: - ret = armv6mpcore_pmu_init(pmu); - break; - case ARM_CPU_PART_CORTEX_A8: - ret = armv7_a8_pmu_init(pmu); - break; - case ARM_CPU_PART_CORTEX_A9: - ret = armv7_a9_pmu_init(pmu); - break; - } - /* Intel CPUs [xscale]. */ - } else if (implementor == ARM_CPU_IMP_INTEL) { - switch (xscale_cpu_arch_version()) { - case ARM_CPU_XSCALE_ARCH_V1: - ret = xscale1pmu_init(pmu); - break; - case ARM_CPU_XSCALE_ARCH_V2: - ret = xscale2pmu_init(pmu); - break; + case ARM_CPU_PART_ARM1136: + ret = armv6_1136_pmu_init(pmu); + break; + case ARM_CPU_PART_ARM1156: + ret = armv6_1156_pmu_init(pmu); + break; + case ARM_CPU_PART_ARM1176: + ret = armv6_1176_pmu_init(pmu); + break; + case ARM_CPU_PART_ARM11MPCORE: + ret = armv6mpcore_pmu_init(pmu); + break; + case ARM_CPU_PART_CORTEX_A8: + ret = armv7_a8_pmu_init(pmu); + break; + case ARM_CPU_PART_CORTEX_A9: + ret = armv7_a9_pmu_init(pmu); + break; + + default: + if (read_cpuid_implementor() == ARM_CPU_IMP_INTEL) { + switch (xscale_cpu_arch_version()) { + case ARM_CPU_XSCALE_ARCH_V1: + ret = xscale1pmu_init(pmu); + break; + case ARM_CPU_XSCALE_ARCH_V2: + ret = xscale2pmu_init(pmu); + break; + } } + break; } put_cpu(); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 03664b0e8fa4..abfeb04f3213 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -65,13 +65,11 @@ enum armv6_counters { * accesses/misses in hardware. */ static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL, [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL, }; @@ -79,116 +77,31 @@ static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + + /* + * The ARM performance counters can count micro DTLB misses, micro ITLB + * misses and main TLB misses. There isn't an event for TLB misses, so + * use the micro misses here and if users want the main TLB misses they + * can use a raw counter. + */ + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, }; enum armv6mpcore_perf_types { @@ -220,13 +133,11 @@ enum armv6mpcore_perf_types { * accesses/misses in hardware. */ static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL, [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL, }; @@ -234,114 +145,26 @@ static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, + + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + + /* + * The ARM performance counters can count micro DTLB misses, micro ITLB + * misses and main TLB misses. There isn't an event for TLB misses, so + * use the micro misses here and if users want the main TLB misses they + * can use a raw counter. + */ + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, }; static inline unsigned long @@ -653,9 +476,8 @@ static int armv6_map_event(struct perf_event *event) &armv6_perf_cache_map, 0xFF); } -static int armv6pmu_init(struct arm_pmu *cpu_pmu) +static void armv6pmu_init(struct arm_pmu *cpu_pmu) { - cpu_pmu->name = "v6"; cpu_pmu->handle_irq = armv6pmu_handle_irq; cpu_pmu->enable = armv6pmu_enable_event; cpu_pmu->disable = armv6pmu_disable_event; @@ -667,7 +489,26 @@ static int armv6pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->map_event = armv6_map_event; cpu_pmu->num_events = 3; cpu_pmu->max_period = (1LLU << 32) - 1; +} + +static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv6pmu_init(cpu_pmu); + cpu_pmu->name = "armv6_1136"; + return 0; +} +static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv6pmu_init(cpu_pmu); + cpu_pmu->name = "armv6_1156"; + return 0; +} + +static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv6pmu_init(cpu_pmu); + cpu_pmu->name = "armv6_1176"; return 0; } @@ -687,7 +528,7 @@ static int armv6mpcore_map_event(struct perf_event *event) static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { - cpu_pmu->name = "v6mpcore"; + cpu_pmu->name = "armv6_11mpcore"; cpu_pmu->handle_irq = armv6pmu_handle_irq; cpu_pmu->enable = armv6pmu_enable_event; cpu_pmu->disable = armv6mpcore_pmu_disable_event; @@ -703,7 +544,17 @@ static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) return 0; } #else -static int armv6pmu_init(struct arm_pmu *cpu_pmu) +static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} + +static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} + +static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu) { return -ENODEV; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 1d37568c547a..116758b77f93 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -148,137 +148,62 @@ enum krait_perf_types { * accesses/misses in hardware. */ static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A8_PERFCTR_STALL_ISIDE, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, + [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, + [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, + [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A9 HW events mapping */ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_A9_PERFCTR_INSTR_CORE_RENAME, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A9_PERFCTR_STALL_ICACHE, [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV7_A9_PERFCTR_STALL_DISPATCH, }; @@ -286,238 +211,83 @@ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A5 HW events mapping */ static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, - [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - /* - * The prefetch counters don't differentiate between the I - * side and the D side. - */ - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, - [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, + [C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, + + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + /* + * The prefetch counters don't differentiate between the I side and the + * D side. + */ + [C(L1I)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, + [C(L1I)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A15 HW events mapping */ static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, @@ -525,123 +295,48 @@ static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A15_PERFCTR_PC_WRITE_SPEC, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - /* - * Not all performance counters differentiate between read - * and write accesses/misses so we're not always strictly - * correct, but it's the best we can do. Writes and reads get - * combined in these cases. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE, + + /* + * Not all performance counters differentiate between read and write + * accesses/misses so we're not always strictly correct, but it's the + * best we can do. Writes and reads get combined in these cases. + */ + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ, + [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ, + [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE, + [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A7 HW events mapping */ static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, @@ -649,123 +344,48 @@ static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, + [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, + [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A12 HW events mapping */ static const unsigned armv7_a12_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, @@ -773,138 +393,60 @@ static const unsigned armv7_a12_perf_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A12_PERFCTR_PC_WRITE_SPEC, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a12_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - /* - * Not all performance counters differentiate between read - * and write accesses/misses so we're not always strictly - * correct, but it's the best we can do. Writes and reads get - * combined in these cases. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_A12_PERFCTR_PF_TLB_REFILL, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + /* + * Not all performance counters differentiate between read and write + * accesses/misses so we're not always strictly correct, but it's the + * best we can do. Writes and reads get combined in these cases. + */ + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ, + [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE, + [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A12_PERFCTR_PF_TLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Krait HW events mapping */ static const unsigned krait_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, }; static const unsigned krait_perf_map_no_branch[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, }; @@ -912,110 +454,31 @@ static const unsigned krait_perf_map_no_branch[PERF_COUNT_HW_MAX] = { static const unsigned krait_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = KRAIT_PERFCTR_L1_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = KRAIT_PERFCTR_L1_ICACHE_MISS, + + [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, + + [C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* @@ -1545,7 +1008,7 @@ static u32 armv7_read_num_pmnc_events(void) static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A8"; + cpu_pmu->name = "armv7_cortex_a8"; cpu_pmu->map_event = armv7_a8_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); return 0; @@ -1554,7 +1017,7 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A9"; + cpu_pmu->name = "armv7_cortex_a9"; cpu_pmu->map_event = armv7_a9_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); return 0; @@ -1563,7 +1026,7 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A5"; + cpu_pmu->name = "armv7_cortex_a5"; cpu_pmu->map_event = armv7_a5_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); return 0; @@ -1572,7 +1035,7 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A15"; + cpu_pmu->name = "armv7_cortex_a15"; cpu_pmu->map_event = armv7_a15_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; @@ -1582,7 +1045,7 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A7"; + cpu_pmu->name = "armv7_cortex_a7"; cpu_pmu->map_event = armv7_a7_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; @@ -1592,7 +1055,7 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A12"; + cpu_pmu->name = "armv7_cortex_a12"; cpu_pmu->map_event = armv7_a12_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; @@ -1602,7 +1065,7 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) { armv7_a12_pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A17"; + cpu_pmu->name = "armv7_cortex_a17"; return 0; } @@ -1823,6 +1286,7 @@ static void krait_pmu_disable_event(struct perf_event *event) unsigned long flags; struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); /* Disable counter and interrupt */ @@ -1848,6 +1312,7 @@ static void krait_pmu_enable_event(struct perf_event *event) unsigned long flags; struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); /* @@ -1981,7 +1446,7 @@ static void krait_pmu_clear_event_idx(struct pmu_hw_events *cpuc, static int krait_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Krait"; + cpu_pmu->name = "armv7_krait"; /* Some early versions of Krait don't support PC write events */ if (of_property_read_bool(cpu_pmu->plat_device->dev.of_node, "qcom,no-pc-write")) diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 63990c42fac9..08da0af550b7 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -48,118 +48,31 @@ enum xscale_counters { }; static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = XSCALE_PERFCTR_ICACHE_NO_DELIVER, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, }; #define XSCALE_PMU_ENABLE 0x001 @@ -442,7 +355,7 @@ static int xscale_map_event(struct perf_event *event) static int xscale1pmu_init(struct arm_pmu *cpu_pmu) { - cpu_pmu->name = "xscale1"; + cpu_pmu->name = "armv5_xscale1"; cpu_pmu->handle_irq = xscale1pmu_handle_irq; cpu_pmu->enable = xscale1pmu_enable_event; cpu_pmu->disable = xscale1pmu_disable_event; @@ -812,7 +725,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val) static int xscale2pmu_init(struct arm_pmu *cpu_pmu) { - cpu_pmu->name = "xscale2"; + cpu_pmu->name = "armv5_xscale2"; cpu_pmu->handle_irq = xscale2pmu_handle_irq; cpu_pmu->enable = xscale2pmu_enable_event; cpu_pmu->disable = xscale2pmu_disable_event; diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 95858966d84e..35e72585ec1d 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -3,6 +3,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/kexec.h> .align 3 /* not needed for this code, but keeps fncpy() happy */ @@ -59,7 +60,7 @@ ENTRY(relocate_new_kernel) mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - ARM( mov pc, lr ) + ARM( ret lr ) THUMB( bx lr ) .align diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 8a16ee5d8a95..84db893dedc2 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -393,19 +393,34 @@ static void __init cpuid_init_hwcaps(void) elf_hwcap |= HWCAP_LPAE; } -static void __init feat_v6_fixup(void) +static void __init elf_hwcap_fixup(void) { - int id = read_cpuid_id(); - - if ((id & 0xff0f0000) != 0x41070000) - return; + unsigned id = read_cpuid_id(); + unsigned sync_prim; /* * HWCAP_TLS is available only on 1136 r1p0 and later, * see also kuser_get_tls_init. */ - if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0)) + if (read_cpuid_part() == ARM_CPU_PART_ARM1136 && + ((id >> 20) & 3) == 0) { elf_hwcap &= ~HWCAP_TLS; + return; + } + + /* Verify if CPUID scheme is implemented */ + if ((id & 0x000f0000) != 0x000f0000) + return; + + /* + * If the CPU supports LDREX/STREX and LDREXB/STREXB, + * avoid advertising SWP; it may not be atomic with + * multiprocessing cores. + */ + sync_prim = ((read_cpuid_ext(CPUID_EXT_ISAR3) >> 8) & 0xf0) | + ((read_cpuid_ext(CPUID_EXT_ISAR4) >> 20) & 0x0f); + if (sync_prim >= 0x13) + elf_hwcap &= ~HWCAP_SWP; } /* @@ -609,7 +624,7 @@ static void __init setup_processor(void) #endif erratum_a15_798181_init(); - feat_v6_fixup(); + elf_hwcap_fixup(); cacheid_init(); cpu_init(); diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 1b880db2a033..e1e60e5a7a27 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -107,7 +107,7 @@ ENTRY(cpu_resume_mmu) instr_sync mov r0, r0 mov r0, r0 - mov pc, r3 @ jump to virtual address + ret r3 @ jump to virtual address ENDPROC(cpu_resume_mmu) .popsection cpu_resume_after_mmu: diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 1aafa0d785eb..72f9241ad5db 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -17,6 +17,8 @@ #include <asm/cputype.h> #define SCU_CTRL 0x00 +#define SCU_ENABLE (1 << 0) +#define SCU_STANDBY_ENABLE (1 << 5) #define SCU_CONFIG 0x04 #define SCU_CPU_STATUS 0x08 #define SCU_INVALIDATE 0x0c @@ -50,10 +52,16 @@ void scu_enable(void __iomem *scu_base) scu_ctrl = readl_relaxed(scu_base + SCU_CTRL); /* already enabled? */ - if (scu_ctrl & 1) + if (scu_ctrl & SCU_ENABLE) return; - scu_ctrl |= 1; + scu_ctrl |= SCU_ENABLE; + + /* Cortex-A9 earlier than r2p0 has no standby bit in SCU */ + if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090 && + (read_cpuid_id() & 0x00f0000f) >= 0x00200000) + scu_ctrl |= SCU_STANDBY_ENABLE; + writel_relaxed(scu_ctrl, scu_base + SCU_CTRL); /* diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index 95d063620b76..2e72be4f623e 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -92,15 +92,19 @@ void erratum_a15_798181_init(void) unsigned int midr = read_cpuid_id(); unsigned int revidr = read_cpuid(CPUID_REVIDR); - /* Cortex-A15 r0p0..r3p2 w/o ECO fix affected */ - if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2 || - (revidr & 0x210) == 0x210) { - return; - } - if (revidr & 0x10) - erratum_a15_798181_handler = erratum_a15_798181_partial; - else + /* Brahma-B15 r0p0..r0p2 affected + * Cortex-A15 r0p0..r3p2 w/o ECO fix affected */ + if ((midr & 0xff0ffff0) == 0x420f00f0 && midr <= 0x420f00f2) erratum_a15_798181_handler = erratum_a15_798181_broadcast; + else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr <= 0x413fc0f2 && + (revidr & 0x210) != 0x210) { + if (revidr & 0x10) + erratum_a15_798181_handler = + erratum_a15_798181_partial; + else + erratum_a15_798181_handler = + erratum_a15_798181_broadcast; + } } #endif diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index b1b89882b113..67ca8578c6d8 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -27,6 +27,7 @@ #include <linux/perf_event.h> #include <asm/opcodes.h> +#include <asm/system_info.h> #include <asm/traps.h> #include <asm/uaccess.h> @@ -266,6 +267,9 @@ static struct undef_hook swp_hook = { */ static int __init swp_emulation_init(void) { + if (cpu_architecture() < CPU_ARCH_ARMv7) + return 0; + #ifdef CONFIG_PROC_FS if (!proc_create("cpu/swp_emulation", S_IRUGO, NULL, &proc_status_fops)) return -ENOMEM; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 829a96d4a179..0cc7e58c47cc 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -50,10 +50,7 @@ unsigned long profile_pc(struct pt_regs *regs) if (!in_lock_functions(regs->ARM_pc)) return regs->ARM_pc; - frame.fp = regs->ARM_fp; - frame.sp = regs->ARM_sp; - frame.lr = regs->ARM_lr; - frame.pc = regs->ARM_pc; + arm_get_current_stackframe(regs, &frame); do { int ret = unwind_frame(&frame); if (ret < 0) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index abd2fc067736..c8e4bb714944 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -31,11 +31,13 @@ #include <asm/exception.h> #include <asm/unistd.h> #include <asm/traps.h> +#include <asm/ptrace.h> #include <asm/unwind.h> #include <asm/tls.h> #include <asm/system_misc.h> #include <asm/opcodes.h> + static const char *handler[]= { "prefetch abort", "data abort", @@ -184,7 +186,7 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) tsk = current; if (regs) { - fp = regs->ARM_fp; + fp = frame_pointer(regs); mode = processor_mode(regs); } else if (tsk != current) { fp = thread_saved_fp(tsk); @@ -719,7 +721,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) dump_instr("", regs); if (user_mode(regs)) { __show_regs(regs); - c_backtrace(regs->ARM_fp, processor_mode(regs)); + c_backtrace(frame_pointer(regs), processor_mode(regs)); } } #endif diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index e67682f02cb2..a61a1dfbb0db 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -479,12 +479,10 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk) tsk = current; if (regs) { - frame.fp = regs->ARM_fp; - frame.sp = regs->ARM_sp; - frame.lr = regs->ARM_lr; + arm_get_current_stackframe(regs, &frame); /* PC might be corrupted, use LR in that case. */ - frame.pc = kernel_text_address(regs->ARM_pc) - ? regs->ARM_pc : regs->ARM_lr; + if (!kernel_text_address(regs->ARM_pc)) + frame.pc = regs->ARM_lr; } else if (tsk == current) { frame.fp = (unsigned long)__builtin_frame_address(0); frame.sp = current_sp; diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 7bcee5c9b604..6f57cb94367f 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -318,7 +318,6 @@ SECTIONS _end = .; STABS_DEBUG - .comment 0 : { *(.comment) } } /* diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 4be5bb150bdd..466bd299b1a8 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -23,7 +23,7 @@ config KVM select HAVE_KVM_CPU_RELAX_INTERCEPT select KVM_MMIO select KVM_ARM_HOST - depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN + depends on ARM_VIRT_EXT && ARM_LPAE ---help--- Support hosting virtualized guest machines. You will also need to select one or more of the processor modules below. diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index 789bca9e64a7..f7057ed045b6 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -21,4 +21,5 @@ obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic.o +obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic-v2.o obj-$(CONFIG_KVM_ARM_TIMER) += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 3c82b37c0f9e..a99e0cdf8ba2 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -155,16 +155,6 @@ int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) return VM_FAULT_SIGBUS; } -void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free, - struct kvm_memory_slot *dont) -{ -} - -int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, - unsigned long npages) -{ - return 0; -} /** * kvm_arch_destroy_vm - destroy the VM data structure @@ -184,7 +174,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm) } } -int kvm_dev_ioctl_check_extension(long ext) +int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) { int r; switch (ext) { @@ -225,33 +215,6 @@ long kvm_arch_dev_ioctl(struct file *filp, return -EINVAL; } -void kvm_arch_memslots_updated(struct kvm *kvm) -{ -} - -int kvm_arch_prepare_memory_region(struct kvm *kvm, - struct kvm_memory_slot *memslot, - struct kvm_userspace_memory_region *mem, - enum kvm_mr_change change) -{ - return 0; -} - -void kvm_arch_commit_memory_region(struct kvm *kvm, - struct kvm_userspace_memory_region *mem, - const struct kvm_memory_slot *old, - enum kvm_mr_change change) -{ -} - -void kvm_arch_flush_shadow_all(struct kvm *kvm) -{ -} - -void kvm_arch_flush_shadow_memslot(struct kvm *kvm, - struct kvm_memory_slot *slot) -{ -} struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) { diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index c58a35116f63..37a0fe1bb9bb 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -44,6 +44,31 @@ static u32 cache_levels; /* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */ #define CSSELR_MAX 12 +/* + * kvm_vcpu_arch.cp15 holds cp15 registers as an array of u32, but some + * of cp15 registers can be viewed either as couple of two u32 registers + * or one u64 register. Current u64 register encoding is that least + * significant u32 word is followed by most significant u32 word. + */ +static inline void vcpu_cp15_reg64_set(struct kvm_vcpu *vcpu, + const struct coproc_reg *r, + u64 val) +{ + vcpu->arch.cp15[r->reg] = val & 0xffffffff; + vcpu->arch.cp15[r->reg + 1] = val >> 32; +} + +static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, + const struct coproc_reg *r) +{ + u64 val; + + val = vcpu->arch.cp15[r->reg + 1]; + val = val << 32; + val = val | vcpu->arch.cp15[r->reg]; + return val; +} + int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run) { kvm_inject_undefined(vcpu); @@ -682,17 +707,23 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, }; +/* + * Reads a register value from a userspace address to a kernel + * variable. Make sure that register size matches sizeof(*__val). + */ static int reg_from_user(void *val, const void __user *uaddr, u64 id) { - /* This Just Works because we are little endian. */ if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0) return -EFAULT; return 0; } +/* + * Writes a register value to a userspace address from a kernel variable. + * Make sure that register size matches sizeof(*__val). + */ static int reg_to_user(void __user *uaddr, const void *val, u64 id) { - /* This Just Works because we are little endian. */ if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0) return -EFAULT; return 0; @@ -702,6 +733,7 @@ static int get_invariant_cp15(u64 id, void __user *uaddr) { struct coproc_params params; const struct coproc_reg *r; + int ret; if (!index_to_params(id, ¶ms)) return -ENOENT; @@ -710,7 +742,15 @@ static int get_invariant_cp15(u64 id, void __user *uaddr) if (!r) return -ENOENT; - return reg_to_user(uaddr, &r->val, id); + ret = -ENOENT; + if (KVM_REG_SIZE(id) == 4) { + u32 val = r->val; + + ret = reg_to_user(uaddr, &val, id); + } else if (KVM_REG_SIZE(id) == 8) { + ret = reg_to_user(uaddr, &r->val, id); + } + return ret; } static int set_invariant_cp15(u64 id, void __user *uaddr) @@ -718,7 +758,7 @@ static int set_invariant_cp15(u64 id, void __user *uaddr) struct coproc_params params; const struct coproc_reg *r; int err; - u64 val = 0; /* Make sure high bits are 0 for 32-bit regs */ + u64 val; if (!index_to_params(id, ¶ms)) return -ENOENT; @@ -726,7 +766,16 @@ static int set_invariant_cp15(u64 id, void __user *uaddr) if (!r) return -ENOENT; - err = reg_from_user(&val, uaddr, id); + err = -ENOENT; + if (KVM_REG_SIZE(id) == 4) { + u32 val32; + + err = reg_from_user(&val32, uaddr, id); + if (!err) + val = val32; + } else if (KVM_REG_SIZE(id) == 8) { + err = reg_from_user(&val, uaddr, id); + } if (err) return err; @@ -1004,6 +1053,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { const struct coproc_reg *r; void __user *uaddr = (void __user *)(long)reg->addr; + int ret; if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) return demux_c15_get(reg->id, uaddr); @@ -1015,14 +1065,24 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) if (!r) return get_invariant_cp15(reg->id, uaddr); - /* Note: copies two regs if size is 64 bit. */ - return reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); + ret = -ENOENT; + if (KVM_REG_SIZE(reg->id) == 8) { + u64 val; + + val = vcpu_cp15_reg64_get(vcpu, r); + ret = reg_to_user(uaddr, &val, reg->id); + } else if (KVM_REG_SIZE(reg->id) == 4) { + ret = reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); + } + + return ret; } int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { const struct coproc_reg *r; void __user *uaddr = (void __user *)(long)reg->addr; + int ret; if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) return demux_c15_set(reg->id, uaddr); @@ -1034,8 +1094,18 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) if (!r) return set_invariant_cp15(reg->id, uaddr); - /* Note: copies two regs if size is 64 bit */ - return reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); + ret = -ENOENT; + if (KVM_REG_SIZE(reg->id) == 8) { + u64 val; + + ret = reg_from_user(&val, uaddr, reg->id); + if (!ret) + vcpu_cp15_reg64_set(vcpu, r, val); + } else if (KVM_REG_SIZE(reg->id) == 4) { + ret = reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); + } + + return ret; } static unsigned int num_demux_regs(void) diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index b23a59c1c522..813e49258690 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -124,16 +124,6 @@ static bool is_timer_reg(u64 index) return false; } -int kvm_arm_timer_set_reg(struct kvm_vcpu *vcpu, u64 regid, u64 value) -{ - return 0; -} - -u64 kvm_arm_timer_get_reg(struct kvm_vcpu *vcpu, u64 regid) -{ - return 0; -} - #else #define NUM_TIMER_REGS 3 @@ -274,13 +264,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, int __attribute_const__ kvm_target_cpu(void) { - unsigned long implementor = read_cpuid_implementor(); - unsigned long part_number = read_cpuid_part_number(); - - if (implementor != ARM_CPU_IMP_ARM) - return -EINVAL; - - switch (part_number) { + switch (read_cpuid_part()) { case ARM_CPU_PART_CORTEX_A7: return KVM_ARM_TARGET_CORTEX_A7; case ARM_CPU_PART_CORTEX_A15: diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 1b9844d369cc..991415d978b6 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -17,6 +17,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/unified.h> #include <asm/asm-offsets.h> #include <asm/kvm_asm.h> @@ -71,7 +72,7 @@ __do_hyp_init: bne phase2 @ Yes, second stage init @ Set the HTTBR to point to the hypervisor PGD pointer passed - mcrr p15, 4, r2, r3, c2 + mcrr p15, 4, rr_lo_hi(r2, r3), c2 @ Set the HTCR and VTCR to the same shareability and cacheability @ settings as the non-secure TTBCR and with T0SZ == 0. @@ -134,10 +135,10 @@ phase2: ldr r0, =TRAMPOLINE_VA adr r1, target bfi r0, r1, #0, #PAGE_SHIFT - mov pc, r0 + ret r0 target: @ We're now in the trampoline code, switch page tables - mcrr p15, 4, r2, r3, c2 + mcrr p15, 4, rr_lo_hi(r2, r3), c2 isb @ Invalidate the old TLBs diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 0d68d4073068..01dcb0e752d9 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -52,7 +52,7 @@ ENTRY(__kvm_tlb_flush_vmid_ipa) dsb ishst add r0, r0, #KVM_VTTBR ldrd r2, r3, [r0] - mcrr p15, 6, r2, r3, c2 @ Write VTTBR + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR isb mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) dsb ish @@ -135,7 +135,7 @@ ENTRY(__kvm_vcpu_run) ldr r1, [vcpu, #VCPU_KVM] add r1, r1, #KVM_VTTBR ldrd r2, r3, [r1] - mcrr p15, 6, r2, r3, c2 @ Write VTTBR + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR @ We're all done, just restore the GPRs and go to the guest restore_guest_regs @@ -199,8 +199,13 @@ after_vfp_restore: restore_host_regs clrex @ Clear exclusive monitor +#ifndef CONFIG_CPU_ENDIAN_BE8 mov r0, r1 @ Return the return code mov r1, #0 @ Clear upper bits in return value +#else + @ r1 already has return code + mov r0, #0 @ Clear upper bits in return value +#endif /* CONFIG_CPU_ENDIAN_BE8 */ bx lr @ return to IOCTL /******************************************************************** diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S index 76af93025574..98c8c5b9a87f 100644 --- a/arch/arm/kvm/interrupts_head.S +++ b/arch/arm/kvm/interrupts_head.S @@ -1,4 +1,5 @@ #include <linux/irqchip/arm-gic.h> +#include <asm/assembler.h> #define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) #define VCPU_USR_SP (VCPU_USR_REG(13)) @@ -420,15 +421,23 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r8, [r2, #GICH_ELRSR0] ldr r9, [r2, #GICH_ELRSR1] ldr r10, [r2, #GICH_APR] - - str r3, [r11, #VGIC_CPU_HCR] - str r4, [r11, #VGIC_CPU_VMCR] - str r5, [r11, #VGIC_CPU_MISR] - str r6, [r11, #VGIC_CPU_EISR] - str r7, [r11, #(VGIC_CPU_EISR + 4)] - str r8, [r11, #VGIC_CPU_ELRSR] - str r9, [r11, #(VGIC_CPU_ELRSR + 4)] - str r10, [r11, #VGIC_CPU_APR] +ARM_BE8(rev r3, r3 ) +ARM_BE8(rev r4, r4 ) +ARM_BE8(rev r5, r5 ) +ARM_BE8(rev r6, r6 ) +ARM_BE8(rev r7, r7 ) +ARM_BE8(rev r8, r8 ) +ARM_BE8(rev r9, r9 ) +ARM_BE8(rev r10, r10 ) + + str r3, [r11, #VGIC_V2_CPU_HCR] + str r4, [r11, #VGIC_V2_CPU_VMCR] + str r5, [r11, #VGIC_V2_CPU_MISR] + str r6, [r11, #VGIC_V2_CPU_EISR] + str r7, [r11, #(VGIC_V2_CPU_EISR + 4)] + str r8, [r11, #VGIC_V2_CPU_ELRSR] + str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)] + str r10, [r11, #VGIC_V2_CPU_APR] /* Clear GICH_HCR */ mov r5, #0 @@ -436,9 +445,10 @@ vcpu .req r0 @ vcpu pointer always in r0 /* Save list registers */ add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_CPU_LR + add r3, r11, #VGIC_V2_CPU_LR ldr r4, [r11, #VGIC_CPU_NR_LR] 1: ldr r6, [r2], #4 +ARM_BE8(rev r6, r6 ) str r6, [r3], #4 subs r4, r4, #1 bne 1b @@ -463,9 +473,12 @@ vcpu .req r0 @ vcpu pointer always in r0 add r11, vcpu, #VCPU_VGIC_CPU /* We only restore a minimal set of registers */ - ldr r3, [r11, #VGIC_CPU_HCR] - ldr r4, [r11, #VGIC_CPU_VMCR] - ldr r8, [r11, #VGIC_CPU_APR] + ldr r3, [r11, #VGIC_V2_CPU_HCR] + ldr r4, [r11, #VGIC_V2_CPU_VMCR] + ldr r8, [r11, #VGIC_V2_CPU_APR] +ARM_BE8(rev r3, r3 ) +ARM_BE8(rev r4, r4 ) +ARM_BE8(rev r8, r8 ) str r3, [r2, #GICH_HCR] str r4, [r2, #GICH_VMCR] @@ -473,9 +486,10 @@ vcpu .req r0 @ vcpu pointer always in r0 /* Restore list registers */ add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_CPU_LR + add r3, r11, #VGIC_V2_CPU_LR ldr r4, [r11, #VGIC_CPU_NR_LR] 1: ldr r6, [r3], #4 +ARM_BE8(rev r6, r6 ) str r6, [r2], #4 subs r4, r4, #1 bne 1b @@ -506,7 +520,7 @@ vcpu .req r0 @ vcpu pointer always in r0 mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL isb - mrrc p15, 3, r2, r3, c14 @ CNTV_CVAL + mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL ldr r4, =VCPU_TIMER_CNTV_CVAL add r5, vcpu, r4 strd r2, r3, [r5] @@ -546,12 +560,12 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r2, [r4, #KVM_TIMER_CNTVOFF] ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] - mcrr p15, 4, r2, r3, c14 @ CNTVOFF + mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF ldr r4, =VCPU_TIMER_CNTV_CVAL add r5, vcpu, r4 ldrd r2, r3, [r5] - mcrr p15, 3, r2, r3, c14 @ CNTV_CVAL + mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL isb ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 16f804938b8f..16e7994bf347 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -90,104 +90,115 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static bool page_empty(void *ptr) +static void clear_pgd_entry(struct kvm *kvm, pgd_t *pgd, phys_addr_t addr) { - struct page *ptr_page = virt_to_page(ptr); - return page_count(ptr_page) == 1; + pud_t *pud_table __maybe_unused = pud_offset(pgd, 0); + pgd_clear(pgd); + kvm_tlb_flush_vmid_ipa(kvm, addr); + pud_free(NULL, pud_table); + put_page(virt_to_page(pgd)); } static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { - if (pud_huge(*pud)) { - pud_clear(pud); - kvm_tlb_flush_vmid_ipa(kvm, addr); - } else { - pmd_t *pmd_table = pmd_offset(pud, 0); - pud_clear(pud); - kvm_tlb_flush_vmid_ipa(kvm, addr); - pmd_free(NULL, pmd_table); - } + pmd_t *pmd_table = pmd_offset(pud, 0); + VM_BUG_ON(pud_huge(*pud)); + pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); + pmd_free(NULL, pmd_table); put_page(virt_to_page(pud)); } static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) { - if (kvm_pmd_huge(*pmd)) { - pmd_clear(pmd); - kvm_tlb_flush_vmid_ipa(kvm, addr); - } else { - pte_t *pte_table = pte_offset_kernel(pmd, 0); - pmd_clear(pmd); - kvm_tlb_flush_vmid_ipa(kvm, addr); - pte_free_kernel(NULL, pte_table); - } + pte_t *pte_table = pte_offset_kernel(pmd, 0); + VM_BUG_ON(kvm_pmd_huge(*pmd)); + pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); + pte_free_kernel(NULL, pte_table); put_page(virt_to_page(pmd)); } -static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) +static void unmap_ptes(struct kvm *kvm, pmd_t *pmd, + phys_addr_t addr, phys_addr_t end) { - if (pte_present(*pte)) { - kvm_set_pte(pte, __pte(0)); - put_page(virt_to_page(pte)); - kvm_tlb_flush_vmid_ipa(kvm, addr); - } + phys_addr_t start_addr = addr; + pte_t *pte, *start_pte; + + start_pte = pte = pte_offset_kernel(pmd, addr); + do { + if (!pte_none(*pte)) { + kvm_set_pte(pte, __pte(0)); + put_page(virt_to_page(pte)); + kvm_tlb_flush_vmid_ipa(kvm, addr); + } + } while (pte++, addr += PAGE_SIZE, addr != end); + + if (kvm_pte_table_empty(start_pte)) + clear_pmd_entry(kvm, pmd, start_addr); } -static void unmap_range(struct kvm *kvm, pgd_t *pgdp, - unsigned long long start, u64 size) +static void unmap_pmds(struct kvm *kvm, pud_t *pud, + phys_addr_t addr, phys_addr_t end) { - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - unsigned long long addr = start, end = start + size; - u64 next; - - while (addr < end) { - pgd = pgdp + pgd_index(addr); - pud = pud_offset(pgd, addr); - pte = NULL; - if (pud_none(*pud)) { - addr = kvm_pud_addr_end(addr, end); - continue; - } + phys_addr_t next, start_addr = addr; + pmd_t *pmd, *start_pmd; - if (pud_huge(*pud)) { - /* - * If we are dealing with a huge pud, just clear it and - * move on. - */ - clear_pud_entry(kvm, pud, addr); - addr = kvm_pud_addr_end(addr, end); - continue; + start_pmd = pmd = pmd_offset(pud, addr); + do { + next = kvm_pmd_addr_end(addr, end); + if (!pmd_none(*pmd)) { + if (kvm_pmd_huge(*pmd)) { + pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); + put_page(virt_to_page(pmd)); + } else { + unmap_ptes(kvm, pmd, addr, next); + } } + } while (pmd++, addr = next, addr != end); - pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd)) { - addr = kvm_pmd_addr_end(addr, end); - continue; - } + if (kvm_pmd_table_empty(start_pmd)) + clear_pud_entry(kvm, pud, start_addr); +} - if (!kvm_pmd_huge(*pmd)) { - pte = pte_offset_kernel(pmd, addr); - clear_pte_entry(kvm, pte, addr); - next = addr + PAGE_SIZE; - } +static void unmap_puds(struct kvm *kvm, pgd_t *pgd, + phys_addr_t addr, phys_addr_t end) +{ + phys_addr_t next, start_addr = addr; + pud_t *pud, *start_pud; - /* - * If the pmd entry is to be cleared, walk back up the ladder - */ - if (kvm_pmd_huge(*pmd) || (pte && page_empty(pte))) { - clear_pmd_entry(kvm, pmd, addr); - next = kvm_pmd_addr_end(addr, end); - if (page_empty(pmd) && !page_empty(pud)) { - clear_pud_entry(kvm, pud, addr); - next = kvm_pud_addr_end(addr, end); + start_pud = pud = pud_offset(pgd, addr); + do { + next = kvm_pud_addr_end(addr, end); + if (!pud_none(*pud)) { + if (pud_huge(*pud)) { + pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); + put_page(virt_to_page(pud)); + } else { + unmap_pmds(kvm, pud, addr, next); } } + } while (pud++, addr = next, addr != end); - addr = next; - } + if (kvm_pud_table_empty(start_pud)) + clear_pgd_entry(kvm, pgd, start_addr); +} + + +static void unmap_range(struct kvm *kvm, pgd_t *pgdp, + phys_addr_t start, u64 size) +{ + pgd_t *pgd; + phys_addr_t addr = start, end = start + size; + phys_addr_t next; + + pgd = pgdp + pgd_index(addr); + do { + next = kvm_pgd_addr_end(addr, end); + unmap_puds(kvm, pgd, addr, next); + } while (pgd++, addr = next, addr != end); } static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd, @@ -748,6 +759,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache; struct vm_area_struct *vma; pfn_t pfn; + pgprot_t mem_type = PAGE_S2; write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu)); if (fault_status == FSC_PERM && !write_fault) { @@ -798,6 +810,9 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (is_error_pfn(pfn)) return -EFAULT; + if (kvm_is_mmio_pfn(pfn)) + mem_type = PAGE_S2_DEVICE; + spin_lock(&kvm->mmu_lock); if (mmu_notifier_retry(kvm, mmu_seq)) goto out_unlock; @@ -805,7 +820,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa); if (hugetlb) { - pmd_t new_pmd = pfn_pmd(pfn, PAGE_S2); + pmd_t new_pmd = pfn_pmd(pfn, mem_type); new_pmd = pmd_mkhuge(new_pmd); if (writable) { kvm_set_s2pmd_writable(&new_pmd); @@ -814,13 +829,14 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, coherent_cache_guest_page(vcpu, hva & PMD_MASK, PMD_SIZE); ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd); } else { - pte_t new_pte = pfn_pte(pfn, PAGE_S2); + pte_t new_pte = pfn_pte(pfn, mem_type); if (writable) { kvm_set_s2pte_writable(&new_pte); kvm_set_pfn_dirty(pfn); } coherent_cache_guest_page(vcpu, hva, PAGE_SIZE); - ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false); + ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, + mem_type == PAGE_S2_DEVICE); } @@ -1100,3 +1116,49 @@ out: free_hyp_pgds(); return err; } + +void kvm_arch_commit_memory_region(struct kvm *kvm, + struct kvm_userspace_memory_region *mem, + const struct kvm_memory_slot *old, + enum kvm_mr_change change) +{ + gpa_t gpa = old->base_gfn << PAGE_SHIFT; + phys_addr_t size = old->npages << PAGE_SHIFT; + if (change == KVM_MR_DELETE || change == KVM_MR_MOVE) { + spin_lock(&kvm->mmu_lock); + unmap_stage2_range(kvm, gpa, size); + spin_unlock(&kvm->mmu_lock); + } +} + +int kvm_arch_prepare_memory_region(struct kvm *kvm, + struct kvm_memory_slot *memslot, + struct kvm_userspace_memory_region *mem, + enum kvm_mr_change change) +{ + return 0; +} + +void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free, + struct kvm_memory_slot *dont) +{ +} + +int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, + unsigned long npages) +{ + return 0; +} + +void kvm_arch_memslots_updated(struct kvm *kvm) +{ +} + +void kvm_arch_flush_shadow_all(struct kvm *kvm) +{ +} + +void kvm_arch_flush_shadow_memslot(struct kvm *kvm, + struct kvm_memory_slot *slot) +{ +} diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S index 638deb13da1c..b05e95840651 100644 --- a/arch/arm/lib/ashldi3.S +++ b/arch/arm/lib/ashldi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> +#include <asm/assembler.h> #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_llsl) THUMB( lsrmi r3, al, ip ) THUMB( orrmi ah, ah, r3 ) mov al, al, lsl r2 - mov pc, lr + ret lr ENDPROC(__ashldi3) ENDPROC(__aeabi_llsl) diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S index 015e8aa5a1d1..275d7d2341a4 100644 --- a/arch/arm/lib/ashrdi3.S +++ b/arch/arm/lib/ashrdi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> +#include <asm/assembler.h> #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_lasr) THUMB( lslmi r3, ah, ip ) THUMB( orrmi al, al, r3 ) mov ah, ah, asr r2 - mov pc, lr + ret lr ENDPROC(__ashrdi3) ENDPROC(__aeabi_lasr) diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index 4102be617fce..fab5a50503ae 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -25,7 +25,7 @@ ENTRY(c_backtrace) #if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) - mov pc, lr + ret lr ENDPROC(c_backtrace) #else stmfd sp!, {r4 - r8, lr} @ Save an extra register so we have a location... diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 9f12ed1eea86..7d807cfd8ef5 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,3 +1,4 @@ +#include <asm/assembler.h> #include <asm/unwind.h> #if __LINUX_ARM_ARCH__ >= 6 @@ -70,7 +71,7 @@ UNWIND( .fnstart ) \instr r2, r2, r3 str r2, [r1, r0, lsl #2] restore_irqs ip - mov pc, lr + ret lr UNWIND( .fnend ) ENDPROC(\name ) .endm @@ -98,7 +99,7 @@ UNWIND( .fnstart ) \store r2, [r1] moveq r0, #0 restore_irqs ip - mov pc, lr + ret lr UNWIND( .fnend ) ENDPROC(\name ) .endm diff --git a/arch/arm/lib/bswapsdi2.S b/arch/arm/lib/bswapsdi2.S index 9fcdd154eff9..07cda737bb11 100644 --- a/arch/arm/lib/bswapsdi2.S +++ b/arch/arm/lib/bswapsdi2.S @@ -1,4 +1,5 @@ #include <linux/linkage.h> +#include <asm/assembler.h> #if __LINUX_ARM_ARCH__ >= 6 ENTRY(__bswapsi2) @@ -18,7 +19,7 @@ ENTRY(__bswapsi2) mov r3, r3, lsr #8 bic r3, r3, #0xff00 eor r0, r3, r0, ror #8 - mov pc, lr + ret lr ENDPROC(__bswapsi2) ENTRY(__bswapdi2) @@ -31,6 +32,6 @@ ENTRY(__bswapdi2) bic r1, r1, #0xff00 eor r1, r1, r0, ror #8 eor r0, r3, ip, ror #8 - mov pc, lr + ret lr ENDPROC(__bswapdi2) #endif diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S index 916c80f13ae7..ed1a421813cb 100644 --- a/arch/arm/lib/call_with_stack.S +++ b/arch/arm/lib/call_with_stack.S @@ -36,9 +36,9 @@ ENTRY(call_with_stack) mov r0, r1 adr lr, BSYM(1f) - mov pc, r2 + ret r2 1: ldr lr, [sp] ldr sp, [sp, #4] - mov pc, lr + ret lr ENDPROC(call_with_stack) diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index 31d3cb34740d..984e0f29d548 100644 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -97,7 +97,7 @@ td3 .req lr #endif #endif adcnes sum, sum, td0 @ update checksum - mov pc, lr + ret lr ENTRY(csum_partial) stmfd sp!, {buf, lr} diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S index d6e742d24007..10b45909610c 100644 --- a/arch/arm/lib/csumpartialcopygeneric.S +++ b/arch/arm/lib/csumpartialcopygeneric.S @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <asm/assembler.h> /* * unsigned int @@ -40,7 +41,7 @@ sum .req r3 adcs sum, sum, ip, put_byte_1 @ update checksum strb ip, [dst], #1 tst dst, #2 - moveq pc, lr @ dst is now 32bit aligned + reteq lr @ dst is now 32bit aligned .Ldst_16bit: load2b r8, ip sub len, len, #2 @@ -48,7 +49,7 @@ sum .req r3 strb r8, [dst], #1 adcs sum, sum, ip, put_byte_1 strb ip, [dst], #1 - mov pc, lr @ dst is now 32bit aligned + ret lr @ dst is now 32bit aligned /* * Handle 0 to 7 bytes, with any alignment of source and diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index bc1033b897b4..518bf6e93f78 100644 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -35,7 +35,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 mul r0, r2, r0 @ max = 2^32-1 add r0, r0, r1, lsr #32-6 movs r0, r0, lsr #6 - moveq pc, lr + reteq lr /* * loops = r0 * HZ * loops_per_jiffy / 1000000 @@ -46,23 +46,23 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 ENTRY(__loop_delay) subs r0, r0, #1 #if 0 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 #endif bhi __loop_delay - mov pc, lr + ret lr ENDPROC(__loop_udelay) ENDPROC(__loop_const_udelay) ENDPROC(__loop_delay) diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 5306de350133..312d43eb686a 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -19,6 +19,7 @@ * Author: Will Deacon <will.deacon@arm.com> */ +#include <linux/clocksource.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/kernel.h> @@ -36,6 +37,7 @@ struct arm_delay_ops arm_delay_ops = { static const struct delay_timer *delay_timer; static bool delay_calibrated; +static u64 delay_res; int read_current_timer(unsigned long *timer_val) { @@ -47,6 +49,11 @@ int read_current_timer(unsigned long *timer_val) } EXPORT_SYMBOL_GPL(read_current_timer); +static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) +{ + return (cyc * mult) >> shift; +} + static void __timer_delay(unsigned long cycles) { cycles_t start = get_cycles(); @@ -69,18 +76,24 @@ static void __timer_udelay(unsigned long usecs) void __init register_current_timer_delay(const struct delay_timer *timer) { - if (!delay_calibrated) { - pr_info("Switching to timer-based delay loop\n"); + u32 new_mult, new_shift; + u64 res; + + clocks_calc_mult_shift(&new_mult, &new_shift, timer->freq, + NSEC_PER_SEC, 3600); + res = cyc_to_ns(1ULL, new_mult, new_shift); + + if (!delay_calibrated && (!delay_res || (res < delay_res))) { + pr_info("Switching to timer-based delay loop, resolution %lluns\n", res); delay_timer = timer; lpj_fine = timer->freq / HZ; + delay_res = res; /* cpufreq may scale loops_per_jiffy, so keep a private copy */ arm_delay_ops.ticks_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; - - delay_calibrated = true; } else { pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); } @@ -91,3 +104,8 @@ unsigned long calibrate_delay_is_known(void) delay_calibrated = true; return lpj_fine; } + +void calibration_delay_done(void) +{ + delay_calibrated = true; +} diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index e55c4842c290..a9eafe4981eb 100644 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -13,6 +13,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/unwind.h> #ifdef __ARMEB__ @@ -97,7 +98,7 @@ UNWIND(.fnstart) mov yl, #0 cmpeq xl, r4 movlo xh, xl - movlo pc, lr + retlo lr @ The division loop for lower bit positions. @ Here we shift remainer bits leftwards rather than moving the @@ -111,14 +112,14 @@ UNWIND(.fnstart) subcs xh, xh, r4 movs ip, ip, lsr #1 bne 4b - mov pc, lr + ret lr @ The top part of remainder became zero. If carry is set @ (the 33th bit) this is a false positive so resume the loop. @ Otherwise, if lower part is also null then we are done. 6: bcs 5b cmp xl, #0 - moveq pc, lr + reteq lr @ We still have remainer bits in the low part. Bring them up. @@ -144,7 +145,7 @@ UNWIND(.fnstart) movs ip, ip, lsr #1 mov xh, #1 bne 4b - mov pc, lr + ret lr 8: @ Division by a power of 2: determine what that divisor order is @ then simply shift values around @@ -184,13 +185,13 @@ UNWIND(.fnstart) THUMB( orr yl, yl, xh ) mov xh, xl, lsl ip mov xh, xh, lsr ip - mov pc, lr + ret lr @ eq -> division by 1: obvious enough... 9: moveq yl, xl moveq yh, xh moveq xh, #0 - moveq pc, lr + reteq lr UNWIND(.fnend) UNWIND(.fnstart) diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 64f6bc1a9132..7848780e8834 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -35,7 +35,7 @@ ENTRY(_find_first_zero_bit_le) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_zero_bit_le) /* @@ -76,7 +76,7 @@ ENTRY(_find_first_bit_le) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_bit_le) /* @@ -114,7 +114,7 @@ ENTRY(_find_first_zero_bit_be) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_zero_bit_be) ENTRY(_find_next_zero_bit_be) @@ -148,7 +148,7 @@ ENTRY(_find_first_bit_be) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_bit_be) ENTRY(_find_next_bit_be) @@ -192,5 +192,5 @@ ENDPROC(_find_next_bit_be) #endif cmp r1, r0 @ Clamp to maxbit movlo r0, r1 - mov pc, lr + ret lr diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 9b06bb41fca6..938600098b88 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -18,7 +18,7 @@ * Inputs: r0 contains the address * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2 contains the zero-extended value + * r2, r3 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see <asm/uaccess.h> @@ -36,7 +36,7 @@ ENTRY(__get_user_1) check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_1) ENTRY(__get_user_2) @@ -56,25 +56,60 @@ rb .req r0 orr r2, rb, r2, lsl #8 #endif mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_2) ENTRY(__get_user_4) check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_4) +ENTRY(__get_user_8) + check_uaccess r0, 8, r1, r2, __get_user_bad +#ifdef CONFIG_THUMB2_KERNEL +5: TUSER(ldr) r2, [r0] +6: TUSER(ldr) r3, [r0, #4] +#else +5: TUSER(ldr) r2, [r0], #4 +6: TUSER(ldr) r3, [r0] +#endif + mov r0, #0 + ret lr +ENDPROC(__get_user_8) + +#ifdef __ARMEB__ +ENTRY(__get_user_lo8) + check_uaccess r0, 8, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS + add r0, r0, #4 +7: ldrt r2, [r0] +#else +7: ldr r2, [r0, #4] +#endif + mov r0, #0 + ret lr +ENDPROC(__get_user_lo8) +#endif + +__get_user_bad8: + mov r3, #0 __get_user_bad: mov r2, #0 mov r0, #-EFAULT - mov pc, lr + ret lr ENDPROC(__get_user_bad) +ENDPROC(__get_user_bad8) .pushsection __ex_table, "a" .long 1b, __get_user_bad .long 2b, __get_user_bad .long 3b, __get_user_bad .long 4b, __get_user_bad + .long 5b, __get_user_bad8 + .long 6b, __get_user_bad8 +#ifdef __ARMEB__ + .long 7b, __get_user_bad +#endif .popsection diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S index 9f4238987fe9..c31b2f3153f1 100644 --- a/arch/arm/lib/io-readsb.S +++ b/arch/arm/lib/io-readsb.S @@ -25,7 +25,7 @@ ENTRY(__raw_readsb) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne .Linsb_align diff --git a/arch/arm/lib/io-readsl.S b/arch/arm/lib/io-readsl.S index 7a7430950c79..2ed86fa5465f 100644 --- a/arch/arm/lib/io-readsl.S +++ b/arch/arm/lib/io-readsl.S @@ -12,7 +12,7 @@ ENTRY(__raw_readsl) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne 3f @@ -33,7 +33,7 @@ ENTRY(__raw_readsl) stmcsia r1!, {r3, ip} ldrne r3, [r0, #0] strne r3, [r1, #0] - mov pc, lr + ret lr 3: ldr r3, [r0] cmp ip, #2 @@ -75,5 +75,5 @@ ENTRY(__raw_readsl) strb r3, [r1, #1] 8: mov r3, ip, get_byte_0 strb r3, [r1, #0] - mov pc, lr + ret lr ENDPROC(__raw_readsl) diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 88487c8c4f23..413da9914529 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -27,11 +27,11 @@ strb r3, [r1], #1 subs r2, r2, #1 - moveq pc, lr + reteq lr ENTRY(__raw_readsw) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr tst r1, #3 bne .Linsw_align diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S index 1f393d42593d..d9a45e9692ae 100644 --- a/arch/arm/lib/io-readsw-armv4.S +++ b/arch/arm/lib/io-readsw-armv4.S @@ -26,7 +26,7 @@ ENTRY(__raw_readsw) teq r2, #0 - moveq pc, lr + reteq lr tst r1, #3 bne .Linsw_align diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S index 68b92f4acaeb..a46bbc9b168b 100644 --- a/arch/arm/lib/io-writesb.S +++ b/arch/arm/lib/io-writesb.S @@ -45,7 +45,7 @@ ENTRY(__raw_writesb) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne .Loutsb_align diff --git a/arch/arm/lib/io-writesl.S b/arch/arm/lib/io-writesl.S index d0d104a0dd11..4ea2435988c1 100644 --- a/arch/arm/lib/io-writesl.S +++ b/arch/arm/lib/io-writesl.S @@ -12,7 +12,7 @@ ENTRY(__raw_writesl) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne 3f @@ -33,7 +33,7 @@ ENTRY(__raw_writesl) ldrne r3, [r1, #0] strcs ip, [r0, #0] strne r3, [r0, #0] - mov pc, lr + ret lr 3: bic r1, r1, #3 ldr r3, [r1], #4 @@ -47,7 +47,7 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #16 str ip, [r0] bne 4b - mov pc, lr + ret lr 5: mov ip, r3, lspull #8 ldr r3, [r1], #4 @@ -55,7 +55,7 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #24 str ip, [r0] bne 5b - mov pc, lr + ret lr 6: mov ip, r3, lspull #24 ldr r3, [r1], #4 @@ -63,5 +63,5 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #8 str ip, [r0] bne 6b - mov pc, lr + ret lr ENDPROC(__raw_writesl) diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 49b800419e32..121789eb6802 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -28,11 +28,11 @@ orr r3, r3, r3, lsl #16 str r3, [r0] subs r2, r2, #1 - moveq pc, lr + reteq lr ENTRY(__raw_writesw) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr tst r1, #3 bne .Loutsw_align diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index ff4f71b579ee..269f90c51ad2 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -31,7 +31,7 @@ ENTRY(__raw_writesw) teq r2, #0 - moveq pc, lr + reteq lr ands r3, r1, #3 bne .Loutsw_align @@ -96,5 +96,5 @@ ENTRY(__raw_writesw) tst r2, #1 3: movne ip, r3, lsr #8 strneh ip, [r0] - mov pc, lr + ret lr ENDPROC(__raw_writesw) diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index c562f649734c..947567ff67f9 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -210,7 +210,7 @@ ENTRY(__aeabi_uidiv) UNWIND(.fnstart) subs r2, r1, #1 - moveq pc, lr + reteq lr bcc Ldiv0 cmp r0, r1 bls 11f @@ -220,16 +220,16 @@ UNWIND(.fnstart) ARM_DIV_BODY r0, r1, r2, r3 mov r0, r2 - mov pc, lr + ret lr 11: moveq r0, #1 movne r0, #0 - mov pc, lr + ret lr 12: ARM_DIV2_ORDER r1, r2 mov r0, r0, lsr r2 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__udivsi3) @@ -244,11 +244,11 @@ UNWIND(.fnstart) moveq r0, #0 tsthi r1, r2 @ see if divisor is power of 2 andeq r0, r0, r2 - movls pc, lr + retls lr ARM_MOD_BODY r0, r1, r2, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__umodsi3) @@ -274,23 +274,23 @@ UNWIND(.fnstart) cmp ip, #0 rsbmi r0, r0, #0 - mov pc, lr + ret lr 10: teq ip, r0 @ same sign ? rsbmi r0, r0, #0 - mov pc, lr + ret lr 11: movlo r0, #0 moveq r0, ip, asr #31 orreq r0, r0, #1 - mov pc, lr + ret lr 12: ARM_DIV2_ORDER r1, r2 cmp ip, #0 mov r0, r3, lsr r2 rsbmi r0, r0, #0 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__divsi3) @@ -315,7 +315,7 @@ UNWIND(.fnstart) 10: cmp ip, #0 rsbmi r0, r0, #0 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__modsi3) @@ -331,7 +331,7 @@ UNWIND(.save {r0, r1, ip, lr} ) ldmfd sp!, {r1, r2, ip, lr} mul r3, r0, r2 sub r1, r1, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) @@ -344,7 +344,7 @@ UNWIND(.save {r0, r1, ip, lr} ) ldmfd sp!, {r1, r2, ip, lr} mul r3, r0, r2 sub r1, r1, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__aeabi_idivmod) diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S index f83d449141f7..922dcd88b02b 100644 --- a/arch/arm/lib/lshrdi3.S +++ b/arch/arm/lib/lshrdi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include <linux/linkage.h> +#include <asm/assembler.h> #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_llsr) THUMB( lslmi r3, ah, ip ) THUMB( orrmi al, al, r3 ) mov ah, ah, lsr r2 - mov pc, lr + ret lr ENDPROC(__lshrdi3) ENDPROC(__aeabi_llsr) diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S index 1da86991d700..74a5bed6d999 100644 --- a/arch/arm/lib/memchr.S +++ b/arch/arm/lib/memchr.S @@ -22,5 +22,5 @@ ENTRY(memchr) bne 1b sub r0, r0, #1 2: movne r0, #0 - mov pc, lr + ret lr ENDPROC(memchr) diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index 94b0650ea98f..671455c854fa 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -110,7 +110,7 @@ ENTRY(memset) strneb r1, [ip], #1 tst r2, #1 strneb r1, [ip], #1 - mov pc, lr + ret lr 6: subs r2, r2, #4 @ 1 do we have enough blt 5b @ 1 bytes to align with? diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S index 3fbdef5f802a..385ccb306fa2 100644 --- a/arch/arm/lib/memzero.S +++ b/arch/arm/lib/memzero.S @@ -121,5 +121,5 @@ ENTRY(__memzero) strneb r2, [r0], #1 @ 1 tst r1, #1 @ 1 a byte left over strneb r2, [r0], #1 @ 1 - mov pc, lr @ 1 + ret lr @ 1 ENDPROC(__memzero) diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S index 36c91b4957e2..204305956925 100644 --- a/arch/arm/lib/muldi3.S +++ b/arch/arm/lib/muldi3.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> #ifdef __ARMEB__ #define xh r0 @@ -41,7 +42,7 @@ ENTRY(__aeabi_lmul) adc xh, xh, yh, lsr #16 adds xl, xl, ip, lsl #16 adc xh, xh, ip, lsr #16 - mov pc, lr + ret lr ENDPROC(__muldi3) ENDPROC(__aeabi_lmul) diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 3d73dcb959b0..38d660d3705f 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -36,7 +36,7 @@ ENTRY(__put_user_1) check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_1) ENTRY(__put_user_2) @@ -60,14 +60,14 @@ ENTRY(__put_user_2) #endif #endif /* CONFIG_THUMB2_KERNEL */ mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_2) ENTRY(__put_user_4) check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_4) ENTRY(__put_user_8) @@ -80,12 +80,12 @@ ENTRY(__put_user_8) 6: TUSER(str) r3, [r0] #endif mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_8) __put_user_bad: mov r0, #-EFAULT - mov pc, lr + ret lr ENDPROC(__put_user_bad) .pushsection __ex_table, "a" diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S index d8f2a1c1aea4..013d64c71e8d 100644 --- a/arch/arm/lib/strchr.S +++ b/arch/arm/lib/strchr.S @@ -23,5 +23,5 @@ ENTRY(strchr) teq r2, r1 movne r0, #0 subeq r0, r0, #1 - mov pc, lr + ret lr ENDPROC(strchr) diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S index 302f20cd2423..3cec1c7482c4 100644 --- a/arch/arm/lib/strrchr.S +++ b/arch/arm/lib/strrchr.S @@ -22,5 +22,5 @@ ENTRY(strrchr) teq r2, #0 bne 1b mov r0, r3 - mov pc, lr + ret lr ENDPROC(strrchr) diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S index f0df6a91db04..ad4a6309141a 100644 --- a/arch/arm/lib/ucmpdi2.S +++ b/arch/arm/lib/ucmpdi2.S @@ -11,6 +11,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> #ifdef __ARMEB__ #define xh r0 @@ -31,7 +32,7 @@ ENTRY(__ucmpdi2) movlo r0, #0 moveq r0, #1 movhi r0, #2 - mov pc, lr + ret lr ENDPROC(__ucmpdi2) @@ -44,7 +45,7 @@ ENTRY(__aeabi_ulcmp) movlo r0, #-1 moveq r0, #0 movhi r0, #1 - mov pc, lr + ret lr ENDPROC(__aeabi_ulcmp) diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 41c839167e87..fc938005ad39 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -9,7 +9,6 @@ config ARCH_BCM_MOBILE bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC select GPIO_BCM_KONA @@ -26,16 +25,18 @@ menu "Broadcom Mobile SoC Selection" config ARCH_BCM_281XX bool "Broadcom BCM281XX SoC family" default y + select HAVE_SMP help - Enable support for the the BCM281XX family, which includes + Enable support for the BCM281XX family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 variants. config ARCH_BCM_21664 bool "Broadcom BCM21664 SoC family" default y + select HAVE_SMP help - Enable support for the the BCM21664 family, which includes + Enable support for the BCM21664 family, which includes BCM21663 and BCM21664 variants. config ARCH_BCM_MOBILE_L2_CACHE @@ -49,6 +50,17 @@ config ARCH_BCM_MOBILE_SMC bool depends on ARCH_BCM_281XX || ARCH_BCM_21664 +config ARCH_BCM_MOBILE_SMP + bool "Broadcom mobile SoC SMP support" + depends on (ARCH_BCM_281XX || ARCH_BCM_21664) && SMP + default y + select HAVE_ARM_SCU + select ARM_ERRATA_764369 + help + SMP support for the BCM281XX and BCM21664 SoC families. + Provided as an option so SMP support for SoCs of this type + can be disabled for an SMP-enabled kernel. + endmenu endif @@ -87,4 +99,20 @@ config ARCH_BCM_5301X different SoC or with the older BCM47XX and BCM53XX based network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx +config ARCH_BRCMSTB + bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7 + depends on MMU + select ARM_GIC + select MIGHT_HAVE_PCI + select HAVE_SMP + select HAVE_ARM_ARCH_TIMER + select BRCMSTB_GISB_ARB + select BRCMSTB_L2_IRQ + help + Say Y if you intend to run the kernel on a Broadcom ARM-based STB + chipset. + + This enables support for Broadcom ARM-based set-top box chipsets, + including the 7445 family of chips. + endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 731292114975..67c492aabf4d 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -16,6 +16,9 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o # BCM21664 obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o +# BCM281XX and BCM21664 SMP support +obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o + # BCM281XX and BCM21664 L2 cache control obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o @@ -30,3 +33,8 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o # BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o + +ifeq ($(CONFIG_ARCH_BRCMSTB),y) +obj-y += brcmstb.o +obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o +endif diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c index f0521cc0640d..82ad5687771f 100644 --- a/arch/arm/mach-bcm/board_bcm21664.c +++ b/arch/arm/mach-bcm/board_bcm21664.c @@ -60,8 +60,7 @@ static void bcm21664_restart(enum reboot_mode mode, const char *cmd) static void __init bcm21664_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, - &platform_bus); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); kona_l2_cache_init(); } diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 1ac59fc0cb15..2e367bd7c600 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -58,8 +58,7 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd) static void __init bcm281xx_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, - &platform_bus); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); kona_l2_cache_init(); } diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c new file mode 100644 index 000000000000..60a5afa06ed7 --- /dev/null +++ b/arch/arm/mach-bcm/brcmstb.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static const char *brcmstb_match[] __initconst = { + "brcm,bcm7445", + "brcm,brcmstb", + NULL +}; + +DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)") + .dt_compat = brcmstb_match, +MACHINE_END diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h new file mode 100644 index 000000000000..ec0c3d112b36 --- /dev/null +++ b/arch/arm/mach-bcm/brcmstb.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BRCMSTB_H__ +#define __BRCMSTB_H__ + +void brcmstb_secondary_startup(void); + +#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S new file mode 100644 index 000000000000..199c1ea58248 --- /dev/null +++ b/arch/arm/mach-bcm/headsmp-brcmstb.S @@ -0,0 +1,33 @@ +/* + * SMP boot code for secondary CPUs + * Based on arch/arm/mach-tegra/headsmp.S + * + * Copyright (C) 2010 NVIDIA, Inc. + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/assembler.h> +#include <linux/linkage.h> +#include <linux/init.h> + + .section ".text.head", "ax" + +ENTRY(brcmstb_secondary_startup) + /* + * Ensure CPU is in a sane state by disabling all IRQs and switching + * into SVC mode. + */ + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 + + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/kona_smp.c new file mode 100644 index 000000000000..66a0465528a5 --- /dev/null +++ b/arch/arm/mach-bcm/kona_smp.c @@ -0,0 +1,202 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * Copyright 2014 Linaro Limited + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/sched.h> + +#include <asm/smp.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +/* Size of mapped Cortex A9 SCU address space */ +#define CORTEX_A9_SCU_SIZE 0x58 + +#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */ +#define BOOT_ADDR_CPUID_MASK 0x3 + +/* Name of device node property defining secondary boot register location */ +#define OF_SECONDARY_BOOT "secondary-boot-reg" + +/* I/O address of register used to coordinate secondary core startup */ +static u32 secondary_boot; + +/* + * Enable the Cortex A9 Snoop Control Unit + * + * By the time this is called we already know there are multiple + * cores present. We assume we're running on a Cortex A9 processor, + * so any trouble getting the base address register or getting the + * SCU base is a problem. + * + * Return 0 if successful or an error code otherwise. + */ +static int __init scu_a9_enable(void) +{ + unsigned long config_base; + void __iomem *scu_base; + + if (!scu_a9_has_base()) { + pr_err("no configuration base address register!\n"); + return -ENXIO; + } + + /* Config base address register value is zero for uniprocessor */ + config_base = scu_a9_get_base(); + if (!config_base) { + pr_err("hardware reports only one core\n"); + return -ENOENT; + } + + scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE); + if (!scu_base) { + pr_err("failed to remap config base (%lu/%u) for SCU\n", + config_base, CORTEX_A9_SCU_SIZE); + return -ENOMEM; + } + + scu_enable(scu_base); + + iounmap(scu_base); /* That's the last we'll need of this */ + + return 0; +} + +static void __init bcm_smp_prepare_cpus(unsigned int max_cpus) +{ + static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; + struct device_node *node; + int ret; + + BUG_ON(secondary_boot); /* We're called only once */ + + /* + * This function is only called via smp_ops->smp_prepare_cpu(). + * That only happens if a "/cpus" device tree node exists + * and has an "enable-method" property that selects the SMP + * operations defined herein. + */ + node = of_find_node_by_path("/cpus"); + BUG_ON(!node); + + /* + * Our secondary enable method requires a "secondary-boot-reg" + * property to specify a register address used to request the + * ROM code boot a secondary code. If we have any trouble + * getting this we fall back to uniprocessor mode. + */ + if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) { + pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n", + node->name); + ret = -ENOENT; /* Arrange to disable SMP */ + goto out; + } + + /* + * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is + * returned, the SoC reported a uniprocessor configuration. + * We bail on any other error. + */ + ret = scu_a9_enable(); +out: + of_node_put(node); + if (ret) { + /* Update the CPU present map to reflect uniprocessor mode */ + BUG_ON(ret != -ENOENT); + pr_warn("disabling SMP\n"); + init_cpu_present(&only_cpu_0); + } +} + +/* + * The ROM code has the secondary cores looping, waiting for an event. + * When an event occurs each core examines the bottom two bits of the + * secondary boot register. When a core finds those bits contain its + * own core id, it performs initialization, including computing its boot + * address by clearing the boot register value's bottom two bits. The + * core signals that it is beginning its execution by writing its boot + * address back to the secondary boot register, and finally jumps to + * that address. + * + * So to start a core executing we need to: + * - Encode the (hardware) CPU id with the bottom bits of the secondary + * start address. + * - Write that value into the secondary boot register. + * - Generate an event to wake up the secondary CPU(s). + * - Wait for the secondary boot register to be re-written, which + * indicates the secondary core has started. + */ +static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + void __iomem *boot_reg; + phys_addr_t boot_func; + u64 start_clock; + u32 cpu_id; + u32 boot_val; + bool timeout = false; + + cpu_id = cpu_logical_map(cpu); + if (cpu_id & ~BOOT_ADDR_CPUID_MASK) { + pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK); + return -EINVAL; + } + + if (!secondary_boot) { + pr_err("required secondary boot register not specified\n"); + return -EINVAL; + } + + boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32)); + if (!boot_reg) { + pr_err("unable to map boot register for cpu %u\n", cpu_id); + return -ENOSYS; + } + + /* + * Secondary cores will start in secondary_startup(), + * defined in "arch/arm/kernel/head.S" + */ + boot_func = virt_to_phys(secondary_startup); + BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK); + BUG_ON(boot_func > (phys_addr_t)U32_MAX); + + /* The core to start is encoded in the low bits */ + boot_val = (u32)boot_func | cpu_id; + writel_relaxed(boot_val, boot_reg); + + sev(); + + /* The low bits will be cleared once the core has started */ + start_clock = local_clock(); + while (!timeout && readl_relaxed(boot_reg) == boot_val) + timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS; + + iounmap(boot_reg); + + if (!timeout) + return 0; + + pr_err("timeout waiting for cpu %u to start\n", cpu_id); + + return -ENOSYS; +} + +static struct smp_operations bcm_smp_ops __initdata = { + .smp_prepare_cpus = bcm_smp_prepare_cpus, + .smp_boot_secondary = bcm_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", + &bcm_smp_ops); diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c new file mode 100644 index 000000000000..af780e9c23a6 --- /dev/null +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -0,0 +1,363 @@ +/* + * Broadcom STB CPU SMP and hotplug support for ARM + * + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/printk.h> +#include <linux/regmap.h> +#include <linux/smp.h> +#include <linux/mfd/syscon.h> +#include <linux/spinlock.h> + +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/mach-types.h> +#include <asm/smp_plat.h> + +#include "brcmstb.h" + +enum { + ZONE_MAN_CLKEN_MASK = BIT(0), + ZONE_MAN_RESET_CNTL_MASK = BIT(1), + ZONE_MAN_MEM_PWR_MASK = BIT(4), + ZONE_RESERVED_1_MASK = BIT(5), + ZONE_MAN_ISO_CNTL_MASK = BIT(6), + ZONE_MANUAL_CONTROL_MASK = BIT(7), + ZONE_PWR_DN_REQ_MASK = BIT(9), + ZONE_PWR_UP_REQ_MASK = BIT(10), + ZONE_BLK_RST_ASSERT_MASK = BIT(12), + ZONE_PWR_OFF_STATE_MASK = BIT(25), + ZONE_PWR_ON_STATE_MASK = BIT(26), + ZONE_DPG_PWR_STATE_MASK = BIT(28), + ZONE_MEM_PWR_STATE_MASK = BIT(29), + ZONE_RESET_STATE_MASK = BIT(31), + CPU0_PWR_ZONE_CTRL_REG = 1, + CPU_RESET_CONFIG_REG = 2, +}; + +static void __iomem *cpubiuctrl_block; +static void __iomem *hif_cont_block; +static u32 cpu0_pwr_zone_ctrl_reg; +static u32 cpu_rst_cfg_reg; +static u32 hif_cont_reg; + +#ifdef CONFIG_HOTPLUG_CPU +static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); + +static int per_cpu_sw_state_rd(u32 cpu) +{ + sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); + return per_cpu(per_cpu_sw_state, cpu); +} + +static void per_cpu_sw_state_wr(u32 cpu, int val) +{ + per_cpu(per_cpu_sw_state, cpu) = val; + dmb(); + sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); + dsb_sev(); +} +#else +static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } +#endif + +static void __iomem *pwr_ctrl_get_base(u32 cpu) +{ + void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; + base += (cpu_logical_map(cpu) * 4); + return base; +} + +static u32 pwr_ctrl_rd(u32 cpu) +{ + void __iomem *base = pwr_ctrl_get_base(cpu); + return readl_relaxed(base); +} + +static void pwr_ctrl_wr(u32 cpu, u32 val) +{ + void __iomem *base = pwr_ctrl_get_base(cpu); + writel(val, base); +} + +static void cpu_rst_cfg_set(u32 cpu, int set) +{ + u32 val; + val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); + if (set) + val |= BIT(cpu_logical_map(cpu)); + else + val &= ~BIT(cpu_logical_map(cpu)); + writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); +} + +static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) +{ + const int reg_ofs = cpu_logical_map(cpu) * 8; + writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); + writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); +} + +static void brcmstb_cpu_boot(u32 cpu) +{ + pr_info("SMP: Booting CPU%d...\n", cpu); + + /* + * set the reset vector to point to the secondary_startup + * routine + */ + cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); + + /* unhalt the cpu */ + cpu_rst_cfg_set(cpu, 0); +} + +static void brcmstb_cpu_power_on(u32 cpu) +{ + /* + * The secondary cores power was cut, so we must go through + * power-on initialization. + */ + u32 tmp; + + pr_info("SMP: Powering up CPU%d...\n", cpu); + + /* Request zone power up */ + pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); + + /* Wait for the power up FSM to complete */ + do { + tmp = pwr_ctrl_rd(cpu); + } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); + + per_cpu_sw_state_wr(cpu, 1); +} + +static int brcmstb_cpu_get_power_state(u32 cpu) +{ + int tmp = pwr_ctrl_rd(cpu); + return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; +} + +#ifdef CONFIG_HOTPLUG_CPU + +static void brcmstb_cpu_die(u32 cpu) +{ + v7_exit_coherency_flush(all); + + /* Prevent all interrupts from reaching this CPU. */ + arch_local_irq_disable(); + + /* + * Final full barrier to ensure everything before this instruction has + * quiesced. + */ + isb(); + dsb(); + + per_cpu_sw_state_wr(cpu, 0); + + /* Sit and wait to die */ + wfi(); + + /* We should never get here... */ + panic("Spurious interrupt on CPU %d received!\n", cpu); +} + +static int brcmstb_cpu_kill(u32 cpu) +{ + u32 tmp; + + pr_info("SMP: Powering down CPU%d...\n", cpu); + + while (per_cpu_sw_state_rd(cpu)) + ; + + /* Program zone reset */ + pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | + ZONE_PWR_DN_REQ_MASK); + + /* Verify zone reset */ + tmp = pwr_ctrl_rd(cpu); + if (!(tmp & ZONE_RESET_STATE_MASK)) + pr_err("%s: Zone reset bit for CPU %d not asserted!\n", + __func__, cpu); + + /* Wait for power down */ + do { + tmp = pwr_ctrl_rd(cpu); + } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); + + /* Settle-time from Broadcom-internal DVT reference code */ + udelay(7); + + /* Assert reset on the CPU */ + cpu_rst_cfg_set(cpu, 1); + + return 1; +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +static int __init setup_hifcpubiuctrl_regs(struct device_node *np) +{ + int rc = 0; + char *name; + struct device_node *syscon_np = NULL; + + name = "syscon-cpu"; + + syscon_np = of_parse_phandle(np, name, 0); + if (!syscon_np) { + pr_err("can't find phandle %s\n", name); + rc = -EINVAL; + goto cleanup; + } + + cpubiuctrl_block = of_iomap(syscon_np, 0); + if (!cpubiuctrl_block) { + pr_err("iomap failed for cpubiuctrl_block\n"); + rc = -EINVAL; + goto cleanup; + } + + rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, + &cpu0_pwr_zone_ctrl_reg); + if (rc) { + pr_err("failed to read 1st entry from %s property (%d)\n", name, + rc); + rc = -EINVAL; + goto cleanup; + } + + rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, + &cpu_rst_cfg_reg); + if (rc) { + pr_err("failed to read 2nd entry from %s property (%d)\n", name, + rc); + rc = -EINVAL; + goto cleanup; + } + +cleanup: + if (syscon_np) + of_node_put(syscon_np); + + return rc; +} + +static int __init setup_hifcont_regs(struct device_node *np) +{ + int rc = 0; + char *name; + struct device_node *syscon_np = NULL; + + name = "syscon-cont"; + + syscon_np = of_parse_phandle(np, name, 0); + if (!syscon_np) { + pr_err("can't find phandle %s\n", name); + rc = -EINVAL; + goto cleanup; + } + + hif_cont_block = of_iomap(syscon_np, 0); + if (!hif_cont_block) { + pr_err("iomap failed for hif_cont_block\n"); + rc = -EINVAL; + goto cleanup; + } + + /* offset is at top of hif_cont_block */ + hif_cont_reg = 0; + +cleanup: + if (syscon_np) + of_node_put(syscon_np); + + return rc; +} + +static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) +{ + int rc; + struct device_node *np; + char *name; + + name = "brcm,brcmstb-smpboot"; + np = of_find_compatible_node(NULL, NULL, name); + if (!np) { + pr_err("can't find compatible node %s\n", name); + return; + } + + rc = setup_hifcpubiuctrl_regs(np); + if (rc) + return; + + rc = setup_hifcont_regs(np); + if (rc) + return; +} + +static DEFINE_SPINLOCK(boot_lock); + +static void brcmstb_secondary_init(unsigned int cpu) +{ + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* Bring up power to the core if necessary */ + if (brcmstb_cpu_get_power_state(cpu) == 0) + brcmstb_cpu_power_on(cpu); + + brcmstb_cpu_boot(cpu); + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return 0; +} + +static struct smp_operations brcmstb_smp_ops __initdata = { + .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, + .smp_secondary_init = brcmstb_secondary_init, + .smp_boot_secondary = brcmstb_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = brcmstb_cpu_kill, + .cpu_die = brcmstb_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 2631cfc5ab0d..24f85be71671 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -13,7 +13,9 @@ config MACH_BERLIN_BG2 bool "Marvell Armada 1500 (BG2)" select CACHE_L2X0 select CPU_PJ4B + select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP + select HAVE_SMP select PINCTRL_BERLIN_BG2 config MACH_BERLIN_BG2CD @@ -25,6 +27,7 @@ config MACH_BERLIN_BG2CD config MACH_BERLIN_BG2Q bool "Marvell Armada 1500 Pro (BG2-Q)" select CACHE_L2X0 + select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL_BERLIN_BG2Q diff --git a/arch/arm/mach-berlin/Makefile b/arch/arm/mach-berlin/Makefile index ab69fe956f49..c0719ecd1890 100644 --- a/arch/arm/mach-berlin/Makefile +++ b/arch/arm/mach-berlin/Makefile @@ -1 +1,2 @@ -obj-y += berlin.o +obj-y += berlin.o +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-berlin/headsmp.S b/arch/arm/mach-berlin/headsmp.S new file mode 100644 index 000000000000..4a4c56a58ad3 --- /dev/null +++ b/arch/arm/mach-berlin/headsmp.S @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2014 Marvell Technology Group Ltd. + * + * Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> + +ENTRY(berlin_secondary_startup) + ARM_BE8(setend be) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(berlin_secondary_startup) + +/* + * If the following instruction is set in the reset exception vector, CPUs + * will fetch the value of the software reset address vector when being + * reset. + */ +.global boot_inst +boot_inst: + ldr pc, [pc, #140] + + .align diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c new file mode 100644 index 000000000000..702e7982015a --- /dev/null +++ b/arch/arm/mach-berlin/platsmp.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2014 Marvell Technology Group Ltd. + * + * Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +#define CPU_RESET 0x00 + +#define RESET_VECT 0x00 +#define SW_RESET_ADDR 0x94 + +extern void berlin_secondary_startup(void); +extern u32 boot_inst; + +static void __iomem *cpu_ctrl; + +static inline void berlin_perform_reset_cpu(unsigned int cpu) +{ + u32 val; + + val = readl(cpu_ctrl + CPU_RESET); + val |= BIT(cpu_logical_map(cpu)); + writel(val, cpu_ctrl + CPU_RESET); +} + +static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + if (!cpu_ctrl) + return -EFAULT; + + /* + * Reset the CPU, making it to execute the instruction in the reset + * exception vector. + */ + berlin_perform_reset_cpu(cpu); + + return 0; +} + +static void __init berlin_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np; + void __iomem *scu_base; + void __iomem *vectors_base; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + scu_base = of_iomap(np, 0); + of_node_put(np); + if (!scu_base) + return; + + np = of_find_compatible_node(NULL, NULL, "marvell,berlin-cpu-ctrl"); + cpu_ctrl = of_iomap(np, 0); + of_node_put(np); + if (!cpu_ctrl) + goto unmap_scu; + + vectors_base = ioremap(CONFIG_VECTORS_BASE, SZ_32K); + if (!vectors_base) + goto unmap_scu; + + scu_enable(scu_base); + flush_cache_all(); + + /* + * Write the first instruction the CPU will execute after being reset + * in the reset exception vector. + */ + writel(boot_inst, vectors_base + RESET_VECT); + + /* + * Write the secondary startup address into the SW reset address + * vector. This is used by boot_inst. + */ + writel(virt_to_phys(berlin_secondary_startup), vectors_base + SW_RESET_ADDR); + + iounmap(vectors_base); +unmap_scu: + iounmap(scu_base); +} + +static struct smp_operations berlin_smp_ops __initdata = { + .smp_prepare_cpus = berlin_smp_prepare_cpus, + .smp_boot_secondary = berlin_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops); diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index d62ca16d5394..45abf6bd5f68 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -266,7 +266,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ .atag_offset = 0x20000, .map_io = clps711x_map_io, - .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = autcpu12_init, diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c index e261a47f2aff..1ec378c334e5 100644 --- a/arch/arm/mach-clps711x/board-cdb89712.c +++ b/arch/arm/mach-clps711x/board-cdb89712.c @@ -140,7 +140,6 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712") /* Maintainer: Ray Lehtiniemi */ .atag_offset = 0x100, .map_io = clps711x_map_io, - .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = cdb89712_init, diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index 94a7add88a3f..f9ca22b646bf 100644 --- a/arch/arm/mach-clps711x/board-clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -25,6 +25,7 @@ #include <asm/mach/arch.h> #include "common.h" +#include "devices.h" static void __init fixup_clep7312(struct tag *tags, char **cmdline) @@ -37,8 +38,8 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") .atag_offset = 0x0100, .fixup = fixup_clep7312, .map_io = clps711x_map_io, - .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, + .init_machine = clps711x_devices_init, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c index f9828f89972a..fdf54d40909a 100644 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -148,26 +148,21 @@ fixup_edb7211(struct tag *tags, char **cmdline) memblock_add(0xc1000000, SZ_8M); } -static void __init edb7211_init(void) -{ - clps711x_devices_init(); -} - static void __init edb7211_init_late(void) { gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios)); platform_device_register(&edb7211_flash_pdev); - platform_device_register_data(&platform_bus, "platform-lcd", 0, + platform_device_register_data(NULL, "platform-lcd", 0, &edb7211_lcd_power_pdata, sizeof(edb7211_lcd_power_pdata)); - platform_device_register_data(&platform_bus, "generic-bl", 0, + platform_device_register_data(NULL, "generic-bl", 0, &edb7211_lcd_backlight_pdata, sizeof(edb7211_lcd_backlight_pdata)); platform_device_register_simple("video-clps711x", 0, NULL, 0); platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, ARRAY_SIZE(edb7211_cs8900_resource)); - platform_device_register_data(&platform_bus, "i2c-gpio", 0, + platform_device_register_data(NULL, "i2c-gpio", 0, &edb7211_i2c_pdata, sizeof(edb7211_i2c_pdata)); } @@ -178,10 +173,9 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .fixup = fixup_edb7211, .reserve = edb7211_reserve, .map_io = clps711x_map_io, - .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, - .init_machine = edb7211_init, + .init_machine = clps711x_devices_init, .init_late = edb7211_init_late, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c index 0cf0e51e6546..e68dd629bda2 100644 --- a/arch/arm/mach-clps711x/board-p720t.c +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -348,14 +348,14 @@ static void __init p720t_init_late(void) { WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios))); - platform_device_register_data(&platform_bus, "platform-lcd", 0, + platform_device_register_data(NULL, "platform-lcd", 0, &p720t_lcd_power_pdata, sizeof(p720t_lcd_power_pdata)); - platform_device_register_data(&platform_bus, "generic-bl", 0, + platform_device_register_data(NULL, "generic-bl", 0, &p720t_lcd_backlight_pdata, sizeof(p720t_lcd_backlight_pdata)); platform_device_register_simple("video-clps711x", 0, NULL, 0); - platform_device_register_data(&platform_bus, "leds-gpio", 0, + platform_device_register_data(NULL, "leds-gpio", 0, &p720t_gpio_led_pdata, sizeof(p720t_gpio_led_pdata)); } @@ -365,7 +365,6 @@ MACHINE_START(P720T, "ARM-Prospector720T") .atag_offset = 0x100, .fixup = fixup_p720t, .map_io = clps711x_map_io, - .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, .init_time = clps711x_timer_init, .init_machine = p720t_init, diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index aee81fa46ccf..2a6323b15782 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -193,15 +193,3 @@ void clps711x_restart(enum reboot_mode mode, const char *cmd) { soft_restart(0); } - -static void clps711x_idle(void) -{ - clps_writel(1, HALT); - asm("mov r0, r0"); - asm("mov r0, r0"); -} - -void __init clps711x_init_early(void) -{ - arm_pm_idle = clps711x_idle; -} diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index 7489139d5d63..f88189963898 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -13,7 +13,6 @@ extern void clps711x_map_io(void); extern void clps711x_init_irq(void); extern void clps711x_timer_init(void); extern void clps711x_restart(enum reboot_mode mode, const char *cmd); -extern void clps711x_init_early(void); /* drivers/irqchip/irq-clps711x.c */ void clps711x_intc_init(phys_addr_t, resource_size_t); diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c index 2001488a5ef2..0c689d3a6710 100644 --- a/arch/arm/mach-clps711x/devices.c +++ b/arch/arm/mach-clps711x/devices.c @@ -14,6 +14,15 @@ #include <mach/hardware.h> +static const struct resource clps711x_cpuidle_res __initconst = + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128); + +static void __init clps711x_add_cpuidle(void) +{ + platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE, + &clps711x_cpuidle_res, 1); +} + static const phys_addr_t clps711x_gpios[][2] __initconst = { { PADR, PADDR }, { PBDR, PBDDR }, @@ -83,6 +92,7 @@ static void __init clps711x_add_uart(void) void __init clps711x_devices_init(void) { + clps711x_add_cpuidle(); clps711x_add_gpio(); clps711x_add_syscon(); clps711x_add_uart(); diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S deleted file mode 100644 index cb3684f8dae0..000000000000 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-clps711x/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <mach/hardware.h> - - .macro addruart, rp, rv, tmp -#ifndef CONFIG_DEBUG_CLPS711X_UART2 - mov \rp, #0x0000 @ UART1 -#else - mov \rp, #0x1000 @ UART2 -#endif - orr \rv, \rp, #CLPS711X_VIRT_BASE - orr \rp, \rp, #CLPS711X_PHYS_BASE - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0480] @ UARTDR - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 11 @ UBUSYx - bne 1001b - .endm - diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 5d6afda1c0e8..833129c9f798 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -24,10 +24,7 @@ #include <mach/clps711x.h> -#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \ - (((x) >> 2) & 0x3c000000))) - -#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE)) +#define CLPS711X_VIRT_BASE IOMEM(0xfeff0000) #ifndef __ASSEMBLY__ #define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index d4e9316ecacb..a5336a5e2739 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -213,7 +213,7 @@ ddr2clk_stop_done: cmp ip, r0 bne ddr2clk_stop_done - mov pc, lr + ret lr ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h index 8e49066ad850..866f8a1c6ff7 100644 --- a/arch/arm/mach-ebsa110/include/mach/memory.h +++ b/arch/arm/mach-ebsa110/include/mach/memory.h @@ -17,11 +17,6 @@ #define __ASM_ARCH_MEMORY_H /* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -/* * Cache flushing area - SRAM */ #define FLUSH_BASE_PHYS 0x40000000 diff --git a/arch/arm/mach-ep93xx/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S index e96923a3017b..ee0be2af5c61 100644 --- a/arch/arm/mach-ep93xx/crunch-bits.S +++ b/arch/arm/mach-ep93xx/crunch-bits.S @@ -198,7 +198,7 @@ crunch_load: get_thread_info r10 #endif 2: dec_preempt_count r10, r3 - mov pc, lr + ret lr /* * Back up crunch regs to save area and disable access to them @@ -277,7 +277,7 @@ ENTRY(crunch_task_copy) mov r3, lr @ preserve return address bl crunch_save msr cpsr_c, ip @ restore interrupt mode - mov pc, r3 + ret r3 /* * Restore crunch state from given memory address @@ -310,4 +310,4 @@ ENTRY(crunch_task_restore) mov r3, lr @ preserve return address bl crunch_load msr cpsr_c, ip @ restore interrupt mode - mov pc, r3 + ret r3 diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h deleted file mode 100644 index c9400cf0051c..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) -#define PLAT_PHYS_OFFSET UL(0x00000000) -#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) -#define PLAT_PHYS_OFFSET UL(0xc0000000) -#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) -#define PLAT_PHYS_OFFSET UL(0xd0000000) -#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) -#define PLAT_PHYS_OFFSET UL(0xe0000000) -#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) -#define PLAT_PHYS_OFFSET UL(0xf0000000) -#else -#error "Kconfig bug: No EP93xx PHYS_OFFSET set" -#endif - -#endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 8f9b66c4ac78..2d0240f241b8 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -100,7 +100,6 @@ config SOC_EXYNOS5440 default y depends on ARCH_EXYNOS5 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_HAS_OPP select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR select MIGHT_HAVE_PCI @@ -119,6 +118,7 @@ config EXYNOS5420_MCPM bool "Exynos5420 Multi-Cluster PM support" depends on MCPM && SOC_EXYNOS5420 select ARM_CCI + select ARM_CPU_SUSPEND help This is needed to provide CPU and cluster power management on Exynos5420 implementing big.LITTLE. diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 493dbc23936f..6a24e111d6e1 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -356,6 +356,15 @@ static void __init exynos_reserve(void) #endif } +static void __init exynos_dt_fixup(void) +{ + /* + * Some versions of uboot pass garbage entries in the memory node, + * use the old CONFIG_ARM_NR_BANKS + */ + of_fdt_limit_memory(8); +} + DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ @@ -370,4 +379,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") .dt_compat = exynos_dt_compat, .restart = exynos_restart, .reserve = exynos_reserve, + .dt_fixup = exynos_dt_fixup, MACHINE_END diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 70e8ccd94668..b2f8b60cf0e9 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -171,7 +171,7 @@ static void exynos_power_down(void) if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { arch_spin_unlock(&exynos_mcpm_lock); - if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) { + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { /* * On the Cortex-A15 we need to disable * L2 prefetching before flushing the cache. @@ -300,6 +300,19 @@ static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) "b cci_enable_port_for_self"); } +static void __init exynos_cache_off(void) +{ + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { + /* disable L2 prefetching on the Cortex-A15 */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n\t" + "isb\n\t" + "dsb" + : : "r" (0x400)); + } + exynos_v7_exit_coherency_flush(all); +} + static const struct of_device_id exynos_dt_mcpm_match[] = { { .compatible = "samsung,exynos5420" }, { .compatible = "samsung,exynos5800" }, @@ -344,6 +357,8 @@ static int __init exynos_mcpm_init(void) ret = mcpm_platform_register(&exynos_power_ops); if (!ret) ret = mcpm_sync_init(exynos_pm_power_up_setup); + if (!ret) + ret = mcpm_loopback(exynos_cache_off); /* turn on the CCI */ if (ret) { iounmap(ns_sram_base_addr); return ret; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 7c829989859c..a9f1cf759949 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -33,6 +33,72 @@ extern void exynos4_secondary_startup(void); +/** + * exynos_core_power_down : power down the specified cpu + * @cpu : the cpu to power down + * + * Power down the specified cpu. The sequence must be finished by a + * call to cpu_do_idle() + * + */ +void exynos_cpu_power_down(int cpu) +{ + pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_up : power up the specified cpu + * @cpu : the cpu to power up + * + * Power up the specified cpu + */ +void exynos_cpu_power_up(int cpu) +{ + pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_state : returns the power state of the cpu + * @cpu : the cpu to retrieve the power state from + * + */ +int exynos_cpu_power_state(int cpu) +{ + return (pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) & + S5P_CORE_LOCAL_PWR_EN); +} + +/** + * exynos_cluster_power_down : power down the specified cluster + * @cluster : the cluster to power down + */ +void exynos_cluster_power_down(int cluster) +{ + pmu_raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_up : power up the specified cluster + * @cluster : the cluster to power up + */ +void exynos_cluster_power_up(int cluster) +{ + pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_state : returns the power state of the cluster + * @cluster : the cluster to retrieve the power state from + * + */ +int exynos_cluster_power_state(int cluster) +{ + return (pmu_raw_readl(EXYNOS_COMMON_STATUS(cluster)) & + S5P_CORE_LOCAL_PWR_EN); +} + static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) @@ -191,7 +257,7 @@ static void __init exynos_smp_init_cpus(void) void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; - if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) ncores = scu_base ? scu_get_core_count(scu_base) : 1; else /* @@ -217,7 +283,7 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) exynos_sysram_init(); - if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); /* diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index bcb96be1efee..18646b7e226b 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -28,7 +28,6 @@ #include <asm/suspend.h> #include <plat/pm-common.h> -#include <plat/pll.h> #include <plat/regs-srom.h> #include <mach/map.h> @@ -101,72 +100,6 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) return -ENOENT; } -/** - * exynos_core_power_down : power down the specified cpu - * @cpu : the cpu to power down - * - * Power down the specified cpu. The sequence must be finished by a - * call to cpu_do_idle() - * - */ -void exynos_cpu_power_down(int cpu) -{ - pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); -} - -/** - * exynos_cpu_power_up : power up the specified cpu - * @cpu : the cpu to power up - * - * Power up the specified cpu - */ -void exynos_cpu_power_up(int cpu) -{ - pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, - EXYNOS_ARM_CORE_CONFIGURATION(cpu)); -} - -/** - * exynos_cpu_power_state : returns the power state of the cpu - * @cpu : the cpu to retrieve the power state from - * - */ -int exynos_cpu_power_state(int cpu) -{ - return (pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) & - S5P_CORE_LOCAL_PWR_EN); -} - -/** - * exynos_cluster_power_down : power down the specified cluster - * @cluster : the cluster to power down - */ -void exynos_cluster_power_down(int cluster) -{ - pmu_raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster)); -} - -/** - * exynos_cluster_power_up : power up the specified cluster - * @cluster : the cluster to power up - */ -void exynos_cluster_power_up(int cluster) -{ - pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, - EXYNOS_COMMON_CONFIGURATION(cluster)); -} - -/** - * exynos_cluster_power_state : returns the power state of the cluster - * @cluster : the cluster to retrieve the power state from - * - */ -int exynos_cluster_power_state(int cluster) -{ - return (pmu_raw_readl(EXYNOS_COMMON_STATUS(cluster)) & - S5P_CORE_LOCAL_PWR_EN); -} - #define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ pmu_base_addr + S5P_INFORM7 : \ (samsung_rev() == EXYNOS4210_REV_1_0 ? \ @@ -305,7 +238,7 @@ static int exynos_pm_suspend(void) tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_save_register(); return 0; @@ -339,7 +272,7 @@ static void exynos_pm_resume(void) if (exynos_pm_central_resume()) goto early_wakeup; - if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_restore_register(); /* For release retention */ @@ -358,7 +291,7 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) scu_enable(S5P_VA_SCU); early_wakeup: @@ -445,15 +378,14 @@ static int exynos_cpu_pm_notifier(struct notifier_block *self, case CPU_PM_ENTER: if (cpu == 0) { exynos_pm_central_suspend(); - if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_save_register(); } break; case CPU_PM_EXIT: if (cpu == 0) { - if (read_cpuid_part_number() == - ARM_CPU_PART_CORTEX_A9) { + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { scu_enable(S5P_VA_SCU); exynos_cpu_restore_register(); } diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index 5c6df377f969..6f2ecccdf323 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -59,11 +59,6 @@ extern unsigned long __bus_to_pfn(unsigned long); */ #define FLUSH_BASE 0xf9000000 -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - #define FLUSH_BASE_PHYS 0x50000000 #endif diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index a5960e2ac090..31aa866c3317 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -2,7 +2,6 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_ERRATA_764369 if SMP diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index feee4dbb0760..984882943f77 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -1,12 +1,36 @@ -config ARCH_HI3xxx - bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7 +config ARCH_HISI + bool "Hisilicon SoC Support" + depends on ARCH_MULTIPLATFORM select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 + select POWER_RESET + select POWER_RESET_HISI + select POWER_SUPPLY + +if ARCH_HISI + +menu "Hisilicon platform type" + +config ARCH_HI3xxx + bool "Hisilicon Hi36xx family" if ARCH_MULTI_V7 + select CACHE_L2X0 + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select PINCTRL + select PINCTRL_SINGLE + help + Support for Hisilicon Hi36xx SoC family + +config ARCH_HIX5HD2 + bool "Hisilicon X5HD2 family" if ARCH_MULTI_V7 select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL select PINCTRL_SINGLE help - Support for Hisilicon Hi36xx/Hi37xx processor family + Support for Hisilicon HIX5HD2 SoC family +endmenu + +endif diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile index 2ae1b59267c2..ee2506b9cde3 100644 --- a/arch/arm/mach-hisi/Makefile +++ b/arch/arm/mach-hisi/Makefile @@ -3,4 +3,4 @@ # obj-y += hisilicon.o -obj-$(CONFIG_SMP) += platsmp.o hotplug.o +obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h index af23ec204538..88b1f487d065 100644 --- a/arch/arm/mach-hisi/core.h +++ b/arch/arm/mach-hisi/core.h @@ -12,4 +12,9 @@ extern void hi3xxx_cpu_die(unsigned int cpu); extern int hi3xxx_cpu_kill(unsigned int cpu); extern void hi3xxx_set_cpu(int cpu, bool enable); +extern void hix5hd2_secondary_startup(void); +extern struct smp_operations hix5hd2_smp_ops; +extern void hix5hd2_set_cpu(int cpu, bool enable); +extern void hix5hd2_cpu_die(unsigned int cpu); + #endif diff --git a/arch/arm/mach-hisi/headsmp.S b/arch/arm/mach-hisi/headsmp.S new file mode 100644 index 000000000000..278889c00b77 --- /dev/null +++ b/arch/arm/mach-hisi/headsmp.S @@ -0,0 +1,16 @@ +/* + * Copyright (c) 2014 Hisilicon Limited. + * Copyright (c) 2014 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __CPUINIT + +ENTRY(hix5hd2_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c index 741faf3e7100..7cda6dda3cd0 100644 --- a/arch/arm/mach-hisi/hisilicon.c +++ b/arch/arm/mach-hisi/hisilicon.c @@ -14,16 +14,10 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/irqchip.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> - -#include <asm/proc-fns.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "core.h" - #define HI3620_SYSCTRL_PHYS_BASE 0xfc802000 #define HI3620_SYSCTRL_VIRT_BASE 0xfe802000 @@ -51,32 +45,6 @@ static void __init hi3620_map_io(void) iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc)); } -static void hi3xxx_restart(enum reboot_mode mode, const char *cmd) -{ - struct device_node *np; - void __iomem *base; - int offset; - - np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); - if (!np) { - pr_err("failed to find hisilicon,sysctrl node\n"); - return; - } - base = of_iomap(np, 0); - if (!base) { - pr_err("failed to map address in hisilicon,sysctrl node\n"); - return; - } - if (of_property_read_u32(np, "reboot-offset", &offset) < 0) { - pr_err("failed to find reboot-offset property\n"); - return; - } - writel_relaxed(0xdeadbeef, base + offset); - - while (1) - cpu_do_idle(); -} - static const char *hi3xxx_compat[] __initconst = { "hisilicon,hi3620-hi4511", NULL, @@ -85,6 +53,13 @@ static const char *hi3xxx_compat[] __initconst = { DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") .map_io = hi3620_map_io, .dt_compat = hi3xxx_compat, - .smp = smp_ops(hi3xxx_smp_ops), - .restart = hi3xxx_restart, +MACHINE_END + +static const char *hix5hd2_compat[] __initconst = { + "hisilicon,hix5hd2", + NULL, +}; + +DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)") + .dt_compat = hix5hd2_compat, MACHINE_END diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index abd441b0c604..84e6919f68c7 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -57,6 +57,14 @@ #define CPU0_NEON_SRST_REQ_EN (1 << 4) #define CPU0_SRST_REQ_EN (1 << 0) +#define HIX5HD2_PERI_CRG20 0x50 +#define CRG20_CPU1_RESET (1 << 17) + +#define HIX5HD2_PERI_PMC0 0x1000 +#define PMC0_CPU1_WAIT_MTCOMS_ACK (1 << 8) +#define PMC0_CPU1_PMC_ENABLE (1 << 7) +#define PMC0_CPU1_POWERDOWN (1 << 3) + enum { HI3620_CTRL, ERROR_CTRL, @@ -157,6 +165,50 @@ void hi3xxx_set_cpu(int cpu, bool enable) set_cpu_hi3620(cpu, enable); } +static bool hix5hd2_hotplug_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "hisilicon,cpuctrl"); + if (np) { + ctrl_base = of_iomap(np, 0); + return true; + } + return false; +} + +void hix5hd2_set_cpu(int cpu, bool enable) +{ + u32 val = 0; + + if (!ctrl_base) + if (!hix5hd2_hotplug_init()) + BUG(); + + if (enable) { + /* power on cpu1 */ + val = readl_relaxed(ctrl_base + HIX5HD2_PERI_PMC0); + val &= ~(PMC0_CPU1_WAIT_MTCOMS_ACK | PMC0_CPU1_POWERDOWN); + val |= PMC0_CPU1_PMC_ENABLE; + writel_relaxed(val, ctrl_base + HIX5HD2_PERI_PMC0); + /* unreset */ + val = readl_relaxed(ctrl_base + HIX5HD2_PERI_CRG20); + val &= ~CRG20_CPU1_RESET; + writel_relaxed(val, ctrl_base + HIX5HD2_PERI_CRG20); + } else { + /* power down cpu1 */ + val = readl_relaxed(ctrl_base + HIX5HD2_PERI_PMC0); + val |= PMC0_CPU1_PMC_ENABLE | PMC0_CPU1_POWERDOWN; + val &= ~PMC0_CPU1_WAIT_MTCOMS_ACK; + writel_relaxed(val, ctrl_base + HIX5HD2_PERI_PMC0); + + /* reset */ + val = readl_relaxed(ctrl_base + HIX5HD2_PERI_CRG20); + val |= CRG20_CPU1_RESET; + writel_relaxed(val, ctrl_base + HIX5HD2_PERI_CRG20); + } +} + static inline void cpu_enter_lowpower(void) { unsigned int v; @@ -199,4 +251,10 @@ int hi3xxx_cpu_kill(unsigned int cpu) hi3xxx_set_cpu(cpu, false); return 1; } + +void hix5hd2_cpu_die(unsigned int cpu) +{ + flush_cache_all(); + hix5hd2_set_cpu(cpu, false); +} #endif diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index 471f1ee3be2b..575dd8285f1f 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -17,6 +17,8 @@ #include "core.h" +#define HIX5HD2_BOOT_ADDRESS 0xffff0000 + static void __iomem *ctrl_base; void hi3xxx_set_cpu_jump(int cpu, void *jump_addr) @@ -35,11 +37,9 @@ int hi3xxx_get_cpu_jump(int cpu) return readl_relaxed(ctrl_base + ((cpu - 1) << 2)); } -static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) +static void __init hisi_enable_scu_a9(void) { - struct device_node *np = NULL; unsigned long base = 0; - u32 offset = 0; void __iomem *scu_base = NULL; if (scu_a9_has_base()) { @@ -52,6 +52,14 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) scu_enable(scu_base); iounmap(scu_base); } +} + +static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np = NULL; + u32 offset = 0; + + hisi_enable_scu_a9(); if (!ctrl_base) { np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); if (!np) { @@ -87,3 +95,42 @@ struct smp_operations hi3xxx_smp_ops __initdata = { .cpu_kill = hi3xxx_cpu_kill, #endif }; + +static void __init hix5hd2_smp_prepare_cpus(unsigned int max_cpus) +{ + hisi_enable_scu_a9(); +} + +void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr) +{ + void __iomem *virt; + + virt = ioremap(start_addr, PAGE_SIZE); + + writel_relaxed(0xe51ff004, virt); /* ldr pc, [rc, #-4] */ + writel_relaxed(jump_addr, virt + 4); /* pc jump phy address */ + iounmap(virt); +} + +static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + phys_addr_t jumpaddr; + + jumpaddr = virt_to_phys(hix5hd2_secondary_startup); + hix5hd2_set_scu_boot_addr(HIX5HD2_BOOT_ADDRESS, jumpaddr); + hix5hd2_set_cpu(cpu, true); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + return 0; +} + + +struct smp_operations hix5hd2_smp_ops __initdata = { + .smp_prepare_cpus = hix5hd2_smp_prepare_cpus, + .smp_boot_secondary = hix5hd2_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = hix5hd2_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(hi3xxx_smp, "hisilicon,hi3620-smp", &hi3xxx_smp_ops); +CPU_METHOD_OF_DECLARE(hix5hd2_smp, "hisilicon,hix5hd2-smp", &hix5hd2_smp_ops); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 2bc7b97861b4..9de84a215abd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,6 +1,5 @@ menuconfig ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 - select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select CLKSRC_MMIO diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c index 1b4366a0e7c0..8eab5440da28 100644 --- a/arch/arm/mach-imx/devices/devices.c +++ b/arch/arm/mach-imx/devices/devices.c @@ -24,12 +24,10 @@ struct device mxc_aips_bus = { .init_name = "mxc_aips", - .parent = &platform_bus, }; struct device mxc_ahb_bus = { .init_name = "mxc_ahb", - .parent = &platform_bus, }; int __init mxc_device_init(void) diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 2f834ce8f39c..eb1c3477c48a 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -245,7 +245,7 @@ static void __init mx27ads_regulator_init(void) vchip->set = vgpio_set; gpiochip_add(vchip); - platform_device_register_data(&platform_bus, "reg-fixed-voltage", + platform_device_register_data(NULL, "reg-fixed-voltage", PLATFORM_DEVID_AUTO, &mx27ads_lcd_regulator_pdata, sizeof(mx27ads_lcd_regulator_pdata)); diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index fe123b079c05..74b50f1982db 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -10,6 +10,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/hardware/cache-l2x0.h> #include "hardware.h" @@ -301,7 +302,7 @@ rbc_loop: resume_mmdc /* return to suspend finish */ - mov pc, lr + ret lr resume: /* invalidate L1 I-cache first */ @@ -325,7 +326,7 @@ resume: mov r5, #0x1 resume_mmdc - mov pc, lr + ret lr ENDPROC(imx6_suspend) /* diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 64f8e2564a37..c455e974bbfe 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -17,7 +17,6 @@ config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" select ARCH_CINTEGRATOR select ARM_TIMER_SP804 - select PLAT_VERSATILE_CLCD select SERIAL_AMBA_PL011 if TTY select SERIAL_AMBA_PL011_CONSOLE if TTY select SOC_BUS diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h deleted file mode 100644 index 334d5e271889..000000000000 --- a/arch/arm/mach-integrator/include/mach/memory.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#define BUS_OFFSET UL(0x80000000) -#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET) -#define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET) -#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET)) -#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET)) - -#endif diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 660ca6feff40..8ca290b479b1 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -31,7 +31,7 @@ #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <linux/irqchip/versatile-fpga.h> +#include <linux/irqchip.h> #include <linux/mtd/physmap.h> #include <linux/clk.h> #include <linux/platform_data/clk-integrator.h> @@ -439,15 +439,10 @@ static void __init ap_of_timer_init(void) integrator_clockevent_init(rate, base, irq); } -static const struct of_device_id fpga_irq_of_match[] __initconst = { - { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, - { /* Sentinel */ } -}; - static void __init ap_init_irq_of(void) { cm_init(); - of_irq_init(fpga_irq_of_match); + irqchip_init(); } /* For the Device Tree, add in the UART callbacks as AUXDATA */ @@ -558,7 +553,6 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .map_io = ap_map_io, .init_early = ap_init_early, .init_irq = ap_init_irq_of, - .handle_irq = fpga_handle_irq, .init_time = ap_of_timer_init, .init_machine = ap_init_of, .restart = integrator_restart, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 0e57f8f820a5..cca02eb75eb5 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -18,9 +18,10 @@ #include <linux/amba/bus.h> #include <linux/amba/kmi.h> #include <linux/amba/clcd.h> +#include <linux/platform_data/video-clcd-versatile.h> #include <linux/amba/mmci.h> #include <linux/io.h> -#include <linux/irqchip/versatile-fpga.h> +#include <linux/irqchip.h> #include <linux/gfp.h> #include <linux/mtd/physmap.h> #include <linux/of_irq.h> @@ -36,8 +37,6 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <plat/clcd.h> - #include "hardware.h" #include "cm.h" #include "common.h" @@ -235,15 +234,10 @@ static void __init intcp_init_early(void) sched_clock_register(intcp_read_sched_clock, 32, 24000000); } -static const struct of_device_id fpga_irq_of_match[] __initconst = { - { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, - { /* Sentinel */ } -}; - static void __init intcp_init_irq_of(void) { cm_init(); - of_irq_init(fpga_irq_of_match); + irqchip_init(); } /* @@ -329,7 +323,6 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .map_io = intcp_map_io, .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, - .handle_irq = fpga_handle_irq, .init_machine = intcp_init_of, .restart = integrator_restart, .dt_compat = intcp_dt_board_compat, diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h index 17b40279e0a4..9311ee2126d6 100644 --- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h +++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h @@ -3,7 +3,7 @@ #ifndef __ASSEMBLY__ -#include <linux/reboot.h> +enum reboot_mode; /* The ATU offsets can change based on the strapping */ extern u32 iop13xx_atux_pmmr_offset; diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h index 7c032d0ab24a..59307e787588 100644 --- a/arch/arm/mach-iop13xx/include/mach/memory.h +++ b/arch/arm/mach-iop13xx/include/mach/memory.h @@ -3,11 +3,6 @@ #include <mach/hardware.h> -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x00000000) - #ifndef __ASSEMBLY__ #if defined(CONFIG_ARCH_IOP13XX) diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index bca96f433495..53c316f7301e 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -20,6 +20,7 @@ #include <linux/dma-mapping.h> #include <linux/serial_8250.h> #include <linux/io.h> +#include <linux/reboot.h> #ifdef CONFIG_MTD_PHYSMAP #include <linux/mtd/physmap.h> #endif diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig deleted file mode 100644 index df4b26340ae4..000000000000 --- a/arch/arm/mach-kirkwood/Kconfig +++ /dev/null @@ -1,111 +0,0 @@ -if ARCH_KIRKWOOD - -menu "Marvell Kirkwood Implementations" - -config KIRKWOOD_LEGACY - bool - -config MACH_D2NET_V2 - bool "LaCie d2 Network v2 NAS Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - LaCie d2 Network v2 NAS. - -config MACH_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - LaCie 2Big Network v2 NAS. - -config MACH_NET5BIG_V2 - bool "LaCie 5Big Network v2 NAS Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - LaCie 5Big Network v2 NAS. - -config MACH_OPENRD - select KIRKWOOD_LEGACY - bool - -config MACH_OPENRD_BASE - bool "Marvell OpenRD Base Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Base Board. - -config MACH_OPENRD_CLIENT - bool "Marvell OpenRD Client Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Client Board. - -config MACH_OPENRD_ULTIMATE - bool "Marvell OpenRD Ultimate Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Ultimate Board. - -config MACH_RD88F6192_NAS - bool "Marvell RD-88F6192-NAS Reference Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - Marvell RD-88F6192-NAS Reference Board. - -config MACH_RD88F6281 - bool "Marvell RD-88F6281 Reference Board" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - Marvell RD-88F6281 Reference Board. - -config MACH_T5325 - bool "HP t5325 Thin Client" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - HP t5325 Thin Client. - -config MACH_TS219 - bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices. - -config MACH_TS41X - bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" - select KIRKWOOD_LEGACY - help - Say 'Y' here if you want your kernel to support the - QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo - NAS devices. - -comment "Device tree entries" - -config ARCH_KIRKWOOD_DT - bool "Marvell Kirkwood Flattened Device Tree" - select KIRKWOOD_CLK - select OF_IRQ - select ORION_IRQCHIP - select ORION_TIMER - select POWER_SUPPLY - select POWER_RESET - select POWER_RESET_GPIO - select REGULATOR - select REGULATOR_FIXED_VOLTAGE - select USE_OF - help - Say 'Y' here if you want your kernel to support the - Marvell Kirkwood using flattened device tree. - -endmenu - -endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile deleted file mode 100644 index 3a72c5c6e747..000000000000 --- a/arch/arm/mach-kirkwood/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o -obj-$(CONFIG_PM) += pm.o - -obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o -obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o -obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o -obj-$(CONFIG_MACH_T5325) += t5325-setup.o -obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o - -obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c deleted file mode 100644 index ff18ff20f71f..000000000000 --- a/arch/arm/mach-kirkwood/board-dt.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> - * - * arch/arm/mach-kirkwood/board-dt.c - * - * Flattened Device Tree board initialization - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/clk.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_net.h> -#include <linux/of_platform.h> -#include <linux/dma-mapping.h> -#include <linux/irqchip.h> -#include <asm/hardware/cache-feroceon-l2.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/bridge-regs.h> -#include <plat/common.h> -#include <plat/pcie.h> -#include "pm.h" - -static struct map_desc kirkwood_io_desc[] __initdata = { - { - .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), - .length = KIRKWOOD_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -static void __init kirkwood_map_io(void) -{ - iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); -} - -static struct resource kirkwood_cpufreq_resources[] = { - [0] = { - .start = CPU_CONTROL_PHYS, - .end = CPU_CONTROL_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device kirkwood_cpufreq_device = { - .name = "kirkwood-cpufreq", - .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), - .resource = kirkwood_cpufreq_resources, -}; - -static void __init kirkwood_cpufreq_init(void) -{ - platform_device_register(&kirkwood_cpufreq_device); -} - -static struct resource kirkwood_cpuidle_resource[] = { - { - .flags = IORESOURCE_MEM, - .start = DDR_OPERATION_BASE, - .end = DDR_OPERATION_BASE + 3, - }, -}; - -static struct platform_device kirkwood_cpuidle = { - .name = "kirkwood_cpuidle", - .id = -1, - .resource = kirkwood_cpuidle_resource, - .num_resources = 1, -}; - -static void __init kirkwood_cpuidle_init(void) -{ - platform_device_register(&kirkwood_cpuidle); -} - -/* Temporary here since mach-mvebu has a function we can use */ -static void kirkwood_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - -#define MV643XX_ETH_MAC_ADDR_LOW 0x0414 -#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 - -static void __init kirkwood_dt_eth_fixup(void) -{ - struct device_node *np; - - /* - * The ethernet interfaces forget the MAC address assigned by u-boot - * if the clocks are turned off. Usually, u-boot on kirkwood boards - * has no DT support to properly set local-mac-address property. - * As a workaround, we get the MAC address from mv643xx_eth registers - * and update the port device node if no valid MAC address is set. - */ - for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { - struct device_node *pnp = of_get_parent(np); - struct clk *clk; - struct property *pmac; - void __iomem *io; - u8 *macaddr; - u32 reg; - - if (!pnp) - continue; - - /* skip disabled nodes or nodes with valid MAC address*/ - if (!of_device_is_available(pnp) || of_get_mac_address(np)) - goto eth_fixup_skip; - - clk = of_clk_get(pnp, 0); - if (IS_ERR(clk)) - goto eth_fixup_skip; - - io = of_iomap(pnp, 0); - if (!io) - goto eth_fixup_no_map; - - /* ensure port clock is not gated to not hang CPU */ - clk_prepare_enable(clk); - - /* store MAC address register contents in local-mac-address */ - pr_err(FW_INFO "%s: local-mac-address is not set\n", - np->full_name); - - pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); - if (!pmac) - goto eth_fixup_no_mem; - - pmac->value = pmac + 1; - pmac->length = 6; - pmac->name = kstrdup("local-mac-address", GFP_KERNEL); - if (!pmac->name) { - kfree(pmac); - goto eth_fixup_no_mem; - } - - macaddr = pmac->value; - reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); - macaddr[0] = (reg >> 24) & 0xff; - macaddr[1] = (reg >> 16) & 0xff; - macaddr[2] = (reg >> 8) & 0xff; - macaddr[3] = reg & 0xff; - - reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); - macaddr[4] = (reg >> 8) & 0xff; - macaddr[5] = reg & 0xff; - - of_update_property(np, pmac); - -eth_fixup_no_mem: - iounmap(io); - clk_disable_unprepare(clk); -eth_fixup_no_map: - clk_put(clk); -eth_fixup_skip: - of_node_put(pnp); - } -} - -/* - * Disable propagation of mbus errors to the CPU local bus, as this - * causes mbus errors (which can occur for example for PCI aborts) to - * throw CPU aborts, which we're not set up to deal with. - */ -static void __init kirkwood_disable_mbus_error_propagation(void) -{ - void __iomem *cpu_config; - - cpu_config = ioremap(CPU_CONFIG_PHYS, 4); - writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); - iounmap(cpu_config); -} - -static void __init kirkwood_dt_init(void) -{ - kirkwood_disable_mbus_error_propagation(); - - BUG_ON(mvebu_mbus_dt_init(false)); - -#ifdef CONFIG_CACHE_FEROCEON_L2 - feroceon_of_init(); -#endif - kirkwood_cpufreq_init(); - kirkwood_cpuidle_init(); - - kirkwood_pm_init(); - kirkwood_dt_eth_fixup(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const kirkwood_dt_board_compat[] = { - "marvell,kirkwood", - NULL -}; - -DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") - /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ - .map_io = kirkwood_map_io, - .init_machine = kirkwood_dt_init, - .restart = kirkwood_restart, - .dt_compat = kirkwood_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c deleted file mode 100644 index 255f33a3903c..000000000000 --- a/arch/arm/mach-kirkwood/common.c +++ /dev/null @@ -1,746 +0,0 @@ -/* - * arch/arm/mach-kirkwood/common.c - * - * Core functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/ata_platform.h> -#include <linux/mtd/nand.h> -#include <linux/dma-mapping.h> -#include <linux/clk-provider.h> -#include <linux/spinlock.h> -#include <linux/mv643xx_i2c.h> -#include <linux/timex.h> -#include <linux/kexec.h> -#include <linux/reboot.h> -#include <net/dsa.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <asm/hardware/cache-feroceon-l2.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/asoc-kirkwood.h> -#include <linux/platform_data/mmc-mvsdio.h> -#include <linux/platform_data/mtd-orion_nand.h> -#include <linux/platform_data/usb-ehci-orion.h> -#include <plat/common.h> -#include <plat/time.h> -#include <linux/platform_data/dma-mv_xor.h> -#include "common.h" -#include "pm.h" - -/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ -#define KIRKWOOD_MBUS_NAND_TARGET 0x01 -#define KIRKWOOD_MBUS_NAND_ATTR 0x2f -#define KIRKWOOD_MBUS_SRAM_TARGET 0x03 -#define KIRKWOOD_MBUS_SRAM_ATTR 0x01 - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc kirkwood_io_desc[] __initdata = { - { - .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), - .length = KIRKWOOD_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init kirkwood_map_io(void) -{ - iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); -} - -/***************************************************************************** - * CLK tree - ****************************************************************************/ - -static void enable_sata0(void) -{ - /* Enable PLL and IVREF */ - writel(readl(SATA0_PHY_MODE_2) | 0xf, SATA0_PHY_MODE_2); - /* Enable PHY */ - writel(readl(SATA0_IF_CTRL) & ~0x200, SATA0_IF_CTRL); -} - -static void disable_sata0(void) -{ - /* Disable PLL and IVREF */ - writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2); - /* Disable PHY */ - writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL); -} - -static void enable_sata1(void) -{ - /* Enable PLL and IVREF */ - writel(readl(SATA1_PHY_MODE_2) | 0xf, SATA1_PHY_MODE_2); - /* Enable PHY */ - writel(readl(SATA1_IF_CTRL) & ~0x200, SATA1_IF_CTRL); -} - -static void disable_sata1(void) -{ - /* Disable PLL and IVREF */ - writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2); - /* Disable PHY */ - writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL); -} - -static void disable_pcie0(void) -{ - writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL); - while (1) - if (readl(PCIE_STATUS) & 0x1) - break; - writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL); -} - -static void disable_pcie1(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - - if (dev == MV88F6282_DEV_ID) { - writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL); - while (1) - if (readl(PCIE1_STATUS) & 0x1) - break; - writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL); - } -} - -/* An extended version of the gated clk. This calls fn_en()/fn_dis - * before enabling/disabling the clock. We use this to turn on/off - * PHYs etc. */ -struct clk_gate_fn { - struct clk_gate gate; - void (*fn_en)(void); - void (*fn_dis)(void); -}; - -#define to_clk_gate_fn(_gate) container_of(_gate, struct clk_gate_fn, gate) -#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) - -static int clk_gate_fn_enable(struct clk_hw *hw) -{ - struct clk_gate *gate = to_clk_gate(hw); - struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); - int ret; - - ret = clk_gate_ops.enable(hw); - if (!ret && gate_fn->fn_en) - gate_fn->fn_en(); - - return ret; -} - -static void clk_gate_fn_disable(struct clk_hw *hw) -{ - struct clk_gate *gate = to_clk_gate(hw); - struct clk_gate_fn *gate_fn = to_clk_gate_fn(gate); - - if (gate_fn->fn_dis) - gate_fn->fn_dis(); - - clk_gate_ops.disable(hw); -} - -static struct clk_ops clk_gate_fn_ops; - -static struct clk __init *clk_register_gate_fn(struct device *dev, - const char *name, - const char *parent_name, unsigned long flags, - void __iomem *reg, u8 bit_idx, - u8 clk_gate_flags, spinlock_t *lock, - void (*fn_en)(void), void (*fn_dis)(void)) -{ - struct clk_gate_fn *gate_fn; - struct clk *clk; - struct clk_init_data init; - - gate_fn = kzalloc(sizeof(struct clk_gate_fn), GFP_KERNEL); - if (!gate_fn) { - pr_err("%s: could not allocate gated clk\n", __func__); - return ERR_PTR(-ENOMEM); - } - - init.name = name; - init.ops = &clk_gate_fn_ops; - init.flags = flags; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = (parent_name ? 1 : 0); - - /* struct clk_gate assignments */ - gate_fn->gate.reg = reg; - gate_fn->gate.bit_idx = bit_idx; - gate_fn->gate.flags = clk_gate_flags; - gate_fn->gate.lock = lock; - gate_fn->gate.hw.init = &init; - gate_fn->fn_en = fn_en; - gate_fn->fn_dis = fn_dis; - - /* ops is the gate ops, but with our enable/disable functions */ - if (clk_gate_fn_ops.enable != clk_gate_fn_enable || - clk_gate_fn_ops.disable != clk_gate_fn_disable) { - clk_gate_fn_ops = clk_gate_ops; - clk_gate_fn_ops.enable = clk_gate_fn_enable; - clk_gate_fn_ops.disable = clk_gate_fn_disable; - } - - clk = clk_register(dev, &gate_fn->gate.hw); - - if (IS_ERR(clk)) - kfree(gate_fn); - - return clk; -} - -static DEFINE_SPINLOCK(gating_lock); -static struct clk *tclk; - -static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx) -{ - return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, - bit_idx, 0, &gating_lock); -} - -static struct clk __init *kirkwood_register_gate_fn(const char *name, - u8 bit_idx, - void (*fn_en)(void), - void (*fn_dis)(void)) -{ - return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, - bit_idx, 0, &gating_lock, fn_en, fn_dis); -} - -static struct clk *ge0, *ge1; - -void __init kirkwood_clk_init(void) -{ - struct clk *runit, *sata0, *sata1, *usb0, *sdio; - struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; - - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, - CLK_IS_ROOT, kirkwood_tclk); - - runit = kirkwood_register_gate("runit", CGC_BIT_RUNIT); - ge0 = kirkwood_register_gate("ge0", CGC_BIT_GE0); - ge1 = kirkwood_register_gate("ge1", CGC_BIT_GE1); - sata0 = kirkwood_register_gate_fn("sata0", CGC_BIT_SATA0, - enable_sata0, disable_sata0); - sata1 = kirkwood_register_gate_fn("sata1", CGC_BIT_SATA1, - enable_sata1, disable_sata1); - usb0 = kirkwood_register_gate("usb0", CGC_BIT_USB0); - sdio = kirkwood_register_gate("sdio", CGC_BIT_SDIO); - crypto = kirkwood_register_gate("crypto", CGC_BIT_CRYPTO); - xor0 = kirkwood_register_gate("xor0", CGC_BIT_XOR0); - xor1 = kirkwood_register_gate("xor1", CGC_BIT_XOR1); - pex0 = kirkwood_register_gate_fn("pex0", CGC_BIT_PEX0, - NULL, disable_pcie0); - pex1 = kirkwood_register_gate_fn("pex1", CGC_BIT_PEX1, - NULL, disable_pcie1); - audio = kirkwood_register_gate("audio", CGC_BIT_AUDIO); - kirkwood_register_gate("tdm", CGC_BIT_TDM); - kirkwood_register_gate("tsu", CGC_BIT_TSU); - - /* clkdev entries, mapping clks to devices */ - orion_clkdev_add(NULL, "orion_spi.0", runit); - orion_clkdev_add(NULL, "orion_spi.1", runit); - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0); - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1); - orion_clkdev_add(NULL, "orion_wdt", tclk); - orion_clkdev_add("0", "sata_mv.0", sata0); - orion_clkdev_add("1", "sata_mv.0", sata1); - orion_clkdev_add(NULL, "orion-ehci.0", usb0); - orion_clkdev_add(NULL, "orion_nand", runit); - orion_clkdev_add(NULL, "mvsdio", sdio); - orion_clkdev_add(NULL, "mv_crypto", crypto); - orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0); - orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1); - orion_clkdev_add("0", "pcie", pex0); - orion_clkdev_add("1", "pcie", pex1); - orion_clkdev_add(NULL, "mvebu-audio", audio); - orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); - orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); - - /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., - * so should never be gated. - */ - clk_prepare_enable(runit); -} - -/***************************************************************************** - * EHCI0 - ****************************************************************************/ -void __init kirkwood_ehci_init(void) -{ - orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); -} - - -/***************************************************************************** - * GE00 - ****************************************************************************/ -void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_ge00_init(eth_data, - GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR, 1600); - /* The interface forgets the MAC address assigned by u-boot if - the clock is turned off, so claim the clk now. */ - clk_prepare_enable(ge0); -} - - -/***************************************************************************** - * GE01 - ****************************************************************************/ -void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_ge01_init(eth_data, - GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR, 1600); - clk_prepare_enable(ge1); -} - - -/***************************************************************************** - * Ethernet switch - ****************************************************************************/ -void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) -{ - orion_ge00_switch_init(d, irq); -} - - -/***************************************************************************** - * NAND flash - ****************************************************************************/ -static struct resource kirkwood_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KIRKWOOD_NAND_MEM_PHYS_BASE, - .end = KIRKWOOD_NAND_MEM_PHYS_BASE + - KIRKWOOD_NAND_MEM_SIZE - 1, -}; - -static struct orion_nand_data kirkwood_nand_data = { - .cle = 0, - .ale = 1, - .width = 8, -}; - -static struct platform_device kirkwood_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &kirkwood_nand_data, - }, - .resource = &kirkwood_nand_resource, - .num_resources = 1, -}; - -void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, - int chip_delay) -{ - kirkwood_nand_data.parts = parts; - kirkwood_nand_data.nr_parts = nr_parts; - kirkwood_nand_data.chip_delay = chip_delay; - platform_device_register(&kirkwood_nand_flash); -} - -void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, - int (*dev_ready)(struct mtd_info *)) -{ - kirkwood_nand_data.parts = parts; - kirkwood_nand_data.nr_parts = nr_parts; - kirkwood_nand_data.dev_ready = dev_ready; - platform_device_register(&kirkwood_nand_flash); -} - -/***************************************************************************** - * SoC RTC - ****************************************************************************/ -static void __init kirkwood_rtc_init(void) -{ - orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC); -} - - -/***************************************************************************** - * SATA - ****************************************************************************/ -void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) -{ - orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA); -} - - -/***************************************************************************** - * SD/SDIO/MMC - ****************************************************************************/ -static struct resource mvsdio_resources[] = { - [0] = { - .start = SDIO_PHYS_BASE, - .end = SDIO_PHYS_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_KIRKWOOD_SDIO, - .end = IRQ_KIRKWOOD_SDIO, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 mvsdio_dmamask = DMA_BIT_MASK(32); - -static struct platform_device kirkwood_sdio = { - .name = "mvsdio", - .id = -1, - .dev = { - .dma_mask = &mvsdio_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mvsdio_resources), - .resource = mvsdio_resources, -}; - -void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */ - mvsdio_data->clock = 100000000; - else - mvsdio_data->clock = 200000000; - kirkwood_sdio.dev.platform_data = mvsdio_data; - platform_device_register(&kirkwood_sdio); -} - - -/***************************************************************************** - * SPI - ****************************************************************************/ -void __init kirkwood_spi_init(void) -{ - orion_spi_init(SPI_PHYS_BASE); -} - - -/***************************************************************************** - * I2C - ****************************************************************************/ -void __init kirkwood_i2c_init(void) -{ - orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8); -} - - -/***************************************************************************** - * UART0 - ****************************************************************************/ - -void __init kirkwood_uart0_init(void) -{ - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, - IRQ_KIRKWOOD_UART_0, tclk); -} - - -/***************************************************************************** - * UART1 - ****************************************************************************/ -void __init kirkwood_uart1_init(void) -{ - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, - IRQ_KIRKWOOD_UART_1, tclk); -} - -/***************************************************************************** - * Cryptographic Engines and Security Accelerator (CESA) - ****************************************************************************/ -void __init kirkwood_crypto_init(void) -{ - orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE, - KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO); -} - - -/***************************************************************************** - * XOR0 - ****************************************************************************/ -void __init kirkwood_xor0_init(void) -{ - orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE, - IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01); -} - - -/***************************************************************************** - * XOR1 - ****************************************************************************/ -void __init kirkwood_xor1_init(void) -{ - orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE, - IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11); -} - - -/***************************************************************************** - * Watchdog - ****************************************************************************/ -void __init kirkwood_wdt_init(void) -{ - orion_wdt_init(); -} - -/***************************************************************************** - * CPU idle - ****************************************************************************/ -static struct resource kirkwood_cpuidle_resource[] = { - { - .flags = IORESOURCE_MEM, - .start = DDR_OPERATION_BASE, - .end = DDR_OPERATION_BASE + 3, - }, -}; - -static struct platform_device kirkwood_cpuidle = { - .name = "kirkwood_cpuidle", - .id = -1, - .resource = kirkwood_cpuidle_resource, - .num_resources = 1, -}; - -void __init kirkwood_cpuidle_init(void) -{ - platform_device_register(&kirkwood_cpuidle); -} - -/***************************************************************************** - * Time handling - ****************************************************************************/ -void __init kirkwood_init_early(void) -{ - orion_time_set_base(TIMER_VIRT_BASE); -} - -int kirkwood_tclk; - -static int __init kirkwood_find_tclk(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - - if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID) - if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0) - return 200000000; - - return 166666667; -} - -void __init kirkwood_timer_init(void) -{ - kirkwood_tclk = kirkwood_find_tclk(); - - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); -} - -/***************************************************************************** - * Audio - ****************************************************************************/ -static struct resource kirkwood_audio_resources[] = { - [0] = { - .start = AUDIO_PHYS_BASE, - .end = AUDIO_PHYS_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_KIRKWOOD_I2S, - .end = IRQ_KIRKWOOD_I2S, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct kirkwood_asoc_platform_data kirkwood_audio_data = { - .burst = 128, -}; - -static struct platform_device kirkwood_audio_device = { - .name = "mvebu-audio", - .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_audio_resources), - .resource = kirkwood_audio_resources, - .dev = { - .platform_data = &kirkwood_audio_data, - }, -}; - -void __init kirkwood_audio_init(void) -{ - platform_device_register(&kirkwood_audio_device); -} - -/***************************************************************************** - * CPU Frequency - ****************************************************************************/ -static struct resource kirkwood_cpufreq_resources[] = { - [0] = { - .start = CPU_CONTROL_PHYS, - .end = CPU_CONTROL_PHYS + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device kirkwood_cpufreq_device = { - .name = "kirkwood-cpufreq", - .id = -1, - .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), - .resource = kirkwood_cpufreq_resources, -}; - -void __init kirkwood_cpufreq_init(void) -{ - platform_device_register(&kirkwood_cpufreq_device); -} - -/***************************************************************************** - * General - ****************************************************************************/ -/* - * Identify device ID and revision. - */ -char * __init kirkwood_id(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - - if (dev == MV88F6281_DEV_ID) { - if (rev == MV88F6281_REV_Z0) - return "MV88F6281-Z0"; - else if (rev == MV88F6281_REV_A0) - return "MV88F6281-A0"; - else if (rev == MV88F6281_REV_A1) - return "MV88F6281-A1"; - else - return "MV88F6281-Rev-Unsupported"; - } else if (dev == MV88F6192_DEV_ID) { - if (rev == MV88F6192_REV_Z0) - return "MV88F6192-Z0"; - else if (rev == MV88F6192_REV_A0) - return "MV88F6192-A0"; - else if (rev == MV88F6192_REV_A1) - return "MV88F6192-A1"; - else - return "MV88F6192-Rev-Unsupported"; - } else if (dev == MV88F6180_DEV_ID) { - if (rev == MV88F6180_REV_A0) - return "MV88F6180-Rev-A0"; - else if (rev == MV88F6180_REV_A1) - return "MV88F6180-Rev-A1"; - else - return "MV88F6180-Rev-Unsupported"; - } else if (dev == MV88F6282_DEV_ID) { - if (rev == MV88F6282_REV_A0) - return "MV88F6282-Rev-A0"; - else if (rev == MV88F6282_REV_A1) - return "MV88F6282-Rev-A1"; - else - return "MV88F6282-Rev-Unsupported"; - } else { - return "Device-Unknown"; - } -} - -void __init kirkwood_setup_wins(void) -{ - mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET, - KIRKWOOD_MBUS_NAND_ATTR, - KIRKWOOD_NAND_MEM_PHYS_BASE, - KIRKWOOD_NAND_MEM_SIZE); - mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET, - KIRKWOOD_MBUS_SRAM_ATTR, - KIRKWOOD_SRAM_PHYS_BASE, - KIRKWOOD_SRAM_SIZE); -} - -void __init kirkwood_l2_init(void) -{ -#ifdef CONFIG_CACHE_FEROCEON_L2 -#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH - writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); - feroceon_l2_init(1); -#else - writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); - feroceon_l2_init(0); -#endif -#endif -} - -void __init kirkwood_init(void) -{ - pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); - - /* - * Disable propagation of mbus errors to the CPU local bus, - * as this causes mbus errors (which can occur for example - * for PCI aborts) to throw CPU aborts, which we're not set - * up to deal with. - */ - writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - - BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ)); - - kirkwood_setup_wins(); - - kirkwood_l2_init(); - - /* Setup root of clk tree */ - kirkwood_clk_init(); - - /* internal devices that every board has */ - kirkwood_rtc_init(); - kirkwood_wdt_init(); - kirkwood_xor0_init(); - kirkwood_xor1_init(); - kirkwood_crypto_init(); - - kirkwood_pm_init(); - kirkwood_cpuidle_init(); -#ifdef CONFIG_KEXEC - kexec_reinit = kirkwood_enable_pcie; -#endif -} - -void kirkwood_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h deleted file mode 100644 index 832a4e2ab8d7..000000000000 --- a/arch/arm/mach-kirkwood/common.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * arch/arm/mach-kirkwood/common.h - * - * Core functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_KIRKWOOD_COMMON_H -#define __ARCH_KIRKWOOD_COMMON_H - -#include <linux/reboot.h> - -struct dsa_platform_data; -struct mv643xx_eth_platform_data; -struct mv_sata_platform_data; -struct mvsdio_platform_data; -struct mtd_partition; -struct mtd_info; -struct kirkwood_asoc_platform_data; - -#define KW_PCIE0 (1 << 0) -#define KW_PCIE1 (1 << 1) - -/* - * Basic Kirkwood init functions used early by machine-setup. - */ -void kirkwood_map_io(void); -void kirkwood_init(void); -void kirkwood_init_early(void); -void kirkwood_init_irq(void); - -void kirkwood_setup_wins(void); - -void kirkwood_enable_pcie(void); -void kirkwood_pcie_id(u32 *dev, u32 *rev); - -void kirkwood_ehci_init(void); -void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data); -void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data); -void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq); -void kirkwood_pcie_init(unsigned int portmask); -void kirkwood_sata_init(struct mv_sata_platform_data *sata_data); -void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data); -void kirkwood_spi_init(void); -void kirkwood_i2c_init(void); -void kirkwood_uart0_init(void); -void kirkwood_uart1_init(void); -void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); -void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, - int (*dev_ready)(struct mtd_info *)); -void kirkwood_audio_init(void); -void kirkwood_cpuidle_init(void); -void kirkwood_cpufreq_init(void); - -void kirkwood_restart(enum reboot_mode, const char *); -void kirkwood_clk_init(void); - -/* early init functions not converted to fdt yet */ -char *kirkwood_id(void); -void kirkwood_l2_init(void); -void kirkwood_wdt_init(void); -void kirkwood_xor0_init(void); -void kirkwood_xor1_init(void); -void kirkwood_crypto_init(void); - -extern int kirkwood_tclk; -extern void kirkwood_timer_init(void); - -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - -#endif diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c deleted file mode 100644 index 453418063c1e..000000000000 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * arch/arm/mach-kirkwood/d2net_v2-setup.c - * - * LaCie d2 Network Space v2 Board Setup - * - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/leds-kirkwood-ns2.h> -#include "common.h" -#include "mpp.h" -#include "lacie_v2-common.h" - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data d2net_v2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data d2net_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define D2NET_V2_GPIO_PUSH_BUTTON 34 -#define D2NET_V2_GPIO_POWER_SWITCH_ON 13 -#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15 - -#define D2NET_V2_SWITCH_POWER_ON 0x1 -#define D2NET_V2_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button d2net_v2_buttons[] = { - [0] = { - .type = EV_SW, - .code = D2NET_V2_SWITCH_POWER_ON, - .gpio = D2NET_V2_GPIO_POWER_SWITCH_ON, - .desc = "Back power switch (on|auto)", - .active_low = 0, - }, - [1] = { - .type = EV_SW, - .code = D2NET_V2_SWITCH_POWER_OFF, - .gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF, - .desc = "Back power switch (auto|off)", - .active_low = 0, - }, - [2] = { - .code = KEY_POWER, - .gpio = D2NET_V2_GPIO_PUSH_BUTTON, - .desc = "Front Push Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data d2net_v2_button_data = { - .buttons = d2net_v2_buttons, - .nbuttons = ARRAY_SIZE(d2net_v2_buttons), -}; - -static struct platform_device d2net_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &d2net_v2_button_data, - }, -}; - -/***************************************************************************** - * GPIO LEDs - ****************************************************************************/ - -#define D2NET_V2_GPIO_RED_LED 12 - -static struct gpio_led d2net_v2_gpio_led_pins[] = { - { - .name = "d2net_v2:red:fail", - .gpio = D2NET_V2_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data d2net_v2_gpio_leds_data = { - .num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins), - .leds = d2net_v2_gpio_led_pins, -}; - -static struct platform_device d2net_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &d2net_v2_gpio_leds_data, - }, -}; - -/***************************************************************************** - * Dual-GPIO CPLD LEDs - ****************************************************************************/ - -#define D2NET_V2_GPIO_BLUE_LED_SLOW 29 -#define D2NET_V2_GPIO_BLUE_LED_CMD 30 - -static struct ns2_led d2net_v2_led_pins[] = { - { - .name = "d2net_v2:blue:sata", - .cmd = D2NET_V2_GPIO_BLUE_LED_CMD, - .slow = D2NET_V2_GPIO_BLUE_LED_SLOW, - }, -}; - -static struct ns2_led_platform_data d2net_v2_leds_data = { - .num_leds = ARRAY_SIZE(d2net_v2_led_pins), - .leds = d2net_v2_led_pins, -}; - -static struct platform_device d2net_v2_leds = { - .name = "leds-ns2", - .id = -1, - .dev = { - .platform_data = &d2net_v2_leds_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int d2net_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Request power-off */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, /* Red led */ - MPP13_GPIO, /* Rear power switch (on|auto) */ - MPP14_GPIO, /* USB fuse */ - MPP15_GPIO, /* Rear power switch (auto|off) */ - MPP16_GPIO, /* SATA 0 power */ - MPP21_SATA0_ACTn, - MPP24_GPIO, /* USB mode select */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* Blue led (slow register) */ - MPP30_GPIO, /* Blue led (command register) */ - MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */ - MPP35_GPIO, /* Inhibit power-off */ - 0 -}; - -#define D2NET_V2_GPIO_POWER_OFF 7 - -static void d2net_v2_power_off(void) -{ - gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1); -} - -static void __init d2net_v2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(d2net_v2_mpp_config); - - lacie_v2_hdd_power_init(1); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&d2net_v2_ge00_data); - kirkwood_sata_init(&d2net_v2_sata_data); - kirkwood_uart0_init(); - lacie_v2_register_flash(); - lacie_v2_register_i2c_devices(); - - platform_device_register(&d2net_v2_leds); - platform_device_register(&d2net_v2_gpio_leds); - platform_device_register(&d2net_v2_gpio_buttons); - - if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = d2net_v2_power_off; - else - pr_err("d2net_v2: failed to configure power-off GPIO\n"); -} - -MACHINE_START(D2NET_V2, "LaCie d2 Network v2") - .atag_offset = 0x100, - .init_machine = d2net_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h deleted file mode 100644 index 1c37082c8b39..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/bridge-regs.h - * - * Mbus-L to Mbus Bridge Registers - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_BRIDGE_REGS_H -#define __ASM_ARCH_BRIDGE_REGS_H - -#include <mach/kirkwood.h> - -#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) -#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) -#define CPU_CONFIG_ERROR_PROP 0x00000004 - -#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) -#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) -#define CPU_RESET 0x00000002 - -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) -#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 - -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) -#define SOFT_RESET 0x00000001 - -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) - -#define BRIDGE_INT_TIMER1_CLR (~0x0004) - -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 - -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) - -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c) -#define CGC_BIT_GE0 (0) -#define CGC_BIT_PEX0 (2) -#define CGC_BIT_USB0 (3) -#define CGC_BIT_SDIO (4) -#define CGC_BIT_TSU (5) -#define CGC_BIT_DUNIT (6) -#define CGC_BIT_RUNIT (7) -#define CGC_BIT_XOR0 (8) -#define CGC_BIT_AUDIO (9) -#define CGC_BIT_SATA0 (14) -#define CGC_BIT_SATA1 (15) -#define CGC_BIT_XOR1 (16) -#define CGC_BIT_CRYPTO (17) -#define CGC_BIT_PEX1 (18) -#define CGC_BIT_GE1 (19) -#define CGC_BIT_TDM (20) -#define CGC_GE0 (1 << 0) -#define CGC_PEX0 (1 << 2) -#define CGC_USB0 (1 << 3) -#define CGC_SDIO (1 << 4) -#define CGC_TSU (1 << 5) -#define CGC_DUNIT (1 << 6) -#define CGC_RUNIT (1 << 7) -#define CGC_XOR0 (1 << 8) -#define CGC_AUDIO (1 << 9) -#define CGC_POWERSAVE (1 << 11) -#define CGC_SATA0 (1 << 14) -#define CGC_SATA1 (1 << 15) -#define CGC_XOR1 (1 << 16) -#define CGC_CRYPTO (1 << 17) -#define CGC_PEX1 (1 << 18) -#define CGC_GE1 (1 << 19) -#define CGC_TDM (1 << 20) -#define CGC_RESERVED (0x6 << 21) - -#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118) -#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118) - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S deleted file mode 100644 index 82db29f7af8f..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Kirkwood platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/bridge-regs.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ check low interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] - ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #31 - ands \irqstat, \irqstat, \tmp - bne 1001f - - @ if no low interrupts set, check high interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] - ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF] - mov \irqnr, #63 - ands \irqstat, \irqstat, \tmp - - @ find first active interrupt source -1001: clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h deleted file mode 100644 index 742b74f43e41..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/hardware.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "kirkwood.h" - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h deleted file mode 100644 index 2bf8161e3b51..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/irqs.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/irqs.h - * - * IRQ definitions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* - * Low Interrupt Controller - */ -#define IRQ_KIRKWOOD_HIGH_SUM 0 -#define IRQ_KIRKWOOD_BRIDGE 1 -#define IRQ_KIRKWOOD_HOST2CPU 2 -#define IRQ_KIRKWOOD_CPU2HOST 3 -#define IRQ_KIRKWOOD_XOR_00 5 -#define IRQ_KIRKWOOD_XOR_01 6 -#define IRQ_KIRKWOOD_XOR_10 7 -#define IRQ_KIRKWOOD_XOR_11 8 -#define IRQ_KIRKWOOD_PCIE 9 -#define IRQ_KIRKWOOD_PCIE1 10 -#define IRQ_KIRKWOOD_GE00_SUM 11 -#define IRQ_KIRKWOOD_GE01_SUM 15 -#define IRQ_KIRKWOOD_USB 19 -#define IRQ_KIRKWOOD_SATA 21 -#define IRQ_KIRKWOOD_CRYPTO 22 -#define IRQ_KIRKWOOD_SPI 23 -#define IRQ_KIRKWOOD_I2S 24 -#define IRQ_KIRKWOOD_TS_0 26 -#define IRQ_KIRKWOOD_SDIO 28 -#define IRQ_KIRKWOOD_TWSI 29 -#define IRQ_KIRKWOOD_AVB 30 -#define IRQ_KIRKWOOD_TDMI 31 - -/* - * High Interrupt Controller - */ -#define IRQ_KIRKWOOD_UART_0 33 -#define IRQ_KIRKWOOD_UART_1 34 -#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35 -#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36 -#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37 -#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38 -#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39 -#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40 -#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41 -#define IRQ_KIRKWOOD_GE00_ERR 46 -#define IRQ_KIRKWOOD_GE01_ERR 47 -#define IRQ_KIRKWOOD_RTC 53 - -/* - * KIRKWOOD General Purpose Pins - */ -#define IRQ_KIRKWOOD_GPIO_START 64 -#define NR_GPIO_IRQS 50 - -#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h deleted file mode 100644 index 92976cef3910..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/kirkwood.h - * - * Generic definitions for Marvell Kirkwood SoC flavors: - * 88F6180, 88F6192 and 88F6281. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_KIRKWOOD_H -#define __ASM_ARCH_KIRKWOOD_H - -/* - * Marvell Kirkwood address maps. - * - * phys - * e0000000 PCIe #0 Memory space - * e8000000 PCIe #1 Memory space - * f1000000 on-chip peripheral registers - * f2000000 PCIe #0 I/O space - * f3000000 PCIe #1 I/O space - * f4000000 NAND controller address window - * f5000000 Security Accelerator SRAM - * - * virt phys size - * fed00000 f1000000 1M on-chip peripheral registers - * fee00000 f2000000 1M PCIe #0 I/O space - * fef00000 f3000000 1M PCIe #1 I/O space - */ - -#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000 -#define KIRKWOOD_SRAM_SIZE SZ_2K - -#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_1K - -#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 -#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000 -#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K - -#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 -#define KIRKWOOD_PCIE_IO_SIZE SZ_64K - -#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000) -#define KIRKWOOD_REGS_SIZE SZ_1M - -#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 -#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 -#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M - -#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000 -#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000 -#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M - -/* - * Register Map - */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) -#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500) -#define DDR_WINDOW_CPU_SZ (0x20) -#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034) -#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) -#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600) -#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) - -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) -#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) -#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) -#define BRIDGE_WINS_SZ (0x80) - -#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000) -#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70) -#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04) -#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000) -#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70) -#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000) - -#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800) -#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800) -#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900) -#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900) -#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00) -#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00) -#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00) -#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000) -#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000) -#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050) -#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330) -#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050) -#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330) - -#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000) - -#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000) -#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000) - -/* - * Supported devices and revisions. - */ -#define MV88F6281_DEV_ID 0x6281 -#define MV88F6281_REV_Z0 0 -#define MV88F6281_REV_A0 2 -#define MV88F6281_REV_A1 3 - -#define MV88F6192_DEV_ID 0x6192 -#define MV88F6192_REV_Z0 0 -#define MV88F6192_REV_A0 2 -#define MV88F6192_REV_A1 3 - -#define MV88F6180_DEV_ID 0x6180 -#define MV88F6180_REV_A0 2 -#define MV88F6180_REV_A1 3 - -#define MV88F6282_DEV_ID 0x6282 -#define MV88F6282_REV_A0 0 -#define MV88F6282_REV_A1 1 -#endif diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h deleted file mode 100644 index 5bca5534021f..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/serial_reg.h> -#include <mach/kirkwood.h> - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c deleted file mode 100644 index 2c47a8ad0e27..000000000000 --- a/arch/arm/mach-kirkwood/irq.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * arch/arm/mach-kirkwood/irq.c - * - * Kirkwood IRQ handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <asm/exception.h> -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <mach/bridge-regs.h> -#include <plat/orion-gpio.h> -#include <plat/irq.h> -#include "common.h" - -static int __initdata gpio0_irqs[4] = { - IRQ_KIRKWOOD_GPIO_LOW_0_7, - IRQ_KIRKWOOD_GPIO_LOW_8_15, - IRQ_KIRKWOOD_GPIO_LOW_16_23, - IRQ_KIRKWOOD_GPIO_LOW_24_31, -}; - -static int __initdata gpio1_irqs[4] = { - IRQ_KIRKWOOD_GPIO_HIGH_0_7, - IRQ_KIRKWOOD_GPIO_HIGH_8_15, - IRQ_KIRKWOOD_GPIO_HIGH_16_23, - 0, -}; - -#ifdef CONFIG_MULTI_IRQ_HANDLER -/* - * Compiling with both non-DT and DT support enabled, will - * break asm irq handler used by non-DT boards. Therefore, - * we provide a C-style irq handler even for non-DT boards, - * if MULTI_IRQ_HANDLER is set. - */ - -static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE; - -asmlinkage void -__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs) -{ - u32 stat; - - stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF); - stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF); - if (stat) { - unsigned int hwirq = __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF); - stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF); - if (stat) { - unsigned int hwirq = 32 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } -} -#endif - -void __init kirkwood_init_irq(void) -{ - orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); - orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); - -#ifdef CONFIG_MULTI_IRQ_HANDLER - set_handle_irq(kirkwood_legacy_handle_irq); -#endif - - /* - * Initialize gpiolib for GPIOs 0-49. - */ - orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0, - IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); -} diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c deleted file mode 100644 index 8e3e4331c380..000000000000 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * arch/arm/mach-kirkwood/lacie_v2-common.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/i2c.h> -#include <linux/platform_data/at24.h> -#include <linux/gpio.h> -#include <asm/mach/time.h> -#include <mach/kirkwood.h> -#include <mach/irqs.h> -#include <plat/time.h> -#include "common.h" -#include "lacie_v2-common.h" - -/***************************************************************************** - * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) - ****************************************************************************/ - -static struct mtd_partition lacie_v2_flash_parts[] = { - { - .name = "u-boot", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static const struct flash_platform_data lacie_v2_flash = { - .type = "mx25l4005a", - .name = "spi_flash", - .parts = lacie_v2_flash_parts, - .nr_parts = ARRAY_SIZE(lacie_v2_flash_parts), -}; - -static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &lacie_v2_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -void __init lacie_v2_register_flash(void) -{ - spi_register_board_info(lacie_v2_spi_slave_info, - ARRAY_SIZE(lacie_v2_spi_slave_info)); - kirkwood_spi_init(); -} - -/***************************************************************************** - * I2C devices - ****************************************************************************/ - -static struct at24_platform_data at24c04 = { - .byte_len = SZ_4K / 8, - .page_size = 16, -}; - -/* - * i2c addr | chip | description - * 0x50 | HT24LC04 | eeprom (512B) - */ - -static struct i2c_board_info __initdata lacie_v2_i2c_info[] = { - { - I2C_BOARD_INFO("24c04", 0x50), - .platform_data = &at24c04, - } -}; - -void __init lacie_v2_register_i2c_devices(void) -{ - kirkwood_i2c_init(); - i2c_register_board_info(0, lacie_v2_i2c_info, - ARRAY_SIZE(lacie_v2_i2c_info)); -} - -/***************************************************************************** - * Hard Disk power - ****************************************************************************/ - -static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 }; - -void __init lacie_v2_hdd_power_init(int hdd_num) -{ - int i; - int err; - - /* Power up all hard disks. */ - for (i = 0; i < hdd_num; i++) { - err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL); - if (err == 0) { - err = gpio_direction_output( - lacie_v2_gpio_hdd_power[i], 1); - /* Free the HDD power GPIOs. This allow user-space to - * configure them via the gpiolib sysfs interface. */ - gpio_free(lacie_v2_gpio_hdd_power[i]); - } - if (err) - pr_err("Failed to power up HDD%d\n", i + 1); - } -} diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h deleted file mode 100644 index fc64f578536e..000000000000 --- a/arch/arm/mach-kirkwood/lacie_v2-common.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-kirkwood/lacie_v2-common.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H -#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H - -void lacie_v2_register_flash(void); -void lacie_v2_register_i2c_devices(void); -void lacie_v2_hdd_power_init(int hdd_num); - -#endif diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c deleted file mode 100644 index e96fd71abd76..000000000000 --- a/arch/arm/mach-kirkwood/mpp.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-kirkwood/mpp.c - * - * MPP functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <plat/mpp.h> -#include "common.h" -#include "mpp.h" - -static unsigned int __init kirkwood_variant(void) -{ - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - - if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) - return MPP_F6281_MASK; - if (dev == MV88F6282_DEV_ID) - return MPP_F6282_MASK; - if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0) - return MPP_F6192_MASK; - if (dev == MV88F6180_DEV_ID) - return MPP_F6180_MASK; - - pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n", - dev, rev); - return 0; -} - -void __init kirkwood_mpp_conf(unsigned int *mpp_list) -{ - orion_mpp_conf(mpp_list, kirkwood_variant(), - MPP_MAX, DEV_BUS_VIRT_BASE); -} diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h deleted file mode 100644 index d5a0d1da2e0e..000000000000 --- a/arch/arm/mach-kirkwood/mpp.h +++ /dev/null @@ -1,348 +0,0 @@ -/* - * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins - * - * Copyright 2009: Marvell Technology Group Ltd. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __KIRKWOOD_MPP_H -#define __KIRKWOOD_MPP_H - -#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \ - /* MPP number */ ((_num) & 0xff) | \ - /* MPP select value */ (((_sel) & 0xf) << 8) | \ - /* may be input signal */ ((!!(_in)) << 12) | \ - /* may be output signal */ ((!!(_out)) << 13) | \ - /* available on F6180 */ ((!!(_F6180)) << 14) | \ - /* available on F6190 */ ((!!(_F6190)) << 15) | \ - /* available on F6192 */ ((!!(_F6192)) << 16) | \ - /* available on F6281 */ ((!!(_F6281)) << 17) | \ - /* available on F6282 */ ((!!(_F6282)) << 18)) - - /* num sel i o 6180 6190 6192 6281 6282 */ - -#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0, 0 ) -#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0, 0 ) -#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0, 0 ) -#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1, 0 ) -#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 ) - -#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 ) - -#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 ) - -#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 ) -#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 ) - -#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 ) -#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 ) -#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 ) - -#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 ) -#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 ) -#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 ) -#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) - -#define MPP_MAX 49 - -void kirkwood_mpp_conf(unsigned int *mpp_list); - -#endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c deleted file mode 100644 index 913d032cdb19..000000000000 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ /dev/null @@ -1,422 +0,0 @@ -/* - * arch/arm/mach-kirkwood/netxbig_v2-setup.c - * - * LaCie 2Big and 5Big Network v2 board setup - * - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/leds-kirkwood-netxbig.h> -#include "common.h" -#include "mpp.h" -#include "lacie_v2-common.h" - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data netxbig_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13 -#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15 -#define NETXBIG_V2_GPIO_FUNC_BUTTON 34 - -#define NETXBIG_V2_SWITCH_POWER_ON 0x1 -#define NETXBIG_V2_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button netxbig_v2_buttons[] = { - [0] = { - .type = EV_SW, - .code = NETXBIG_V2_SWITCH_POWER_ON, - .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON, - .desc = "Back power switch (on|auto)", - .active_low = 1, - }, - [1] = { - .type = EV_SW, - .code = NETXBIG_V2_SWITCH_POWER_OFF, - .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF, - .desc = "Back power switch (auto|off)", - .active_low = 1, - }, - [2] = { - .code = KEY_OPTION, - .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON, - .desc = "Function button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data netxbig_v2_button_data = { - .buttons = netxbig_v2_buttons, - .nbuttons = ARRAY_SIZE(netxbig_v2_buttons), -}; - -static struct platform_device netxbig_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &netxbig_v2_button_data, - }, -}; - -/***************************************************************************** - * GPIO extension LEDs - ****************************************************************************/ - -/* - * The LEDs are controlled by a CPLD and can be configured through a GPIO - * extension bus: - * - * - address register : bit [0-2] -> GPIO [47-49] - * - data register : bit [0-2] -> GPIO [44-46] - * - enable register : GPIO 29 - */ - -static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; -static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; - -static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { - .addr = netxbig_v2_gpio_ext_addr, - .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), - .data = netxbig_v2_gpio_ext_data, - .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), - .enable = 29, -}; - -/* - * Address register selection: - * - * addr | register - * ---------------------------- - * 0 | front LED - * 1 | front LED brightness - * 2 | SATA LED brightness - * 3 | SATA0 LED - * 4 | SATA1 LED - * 5 | SATA2 LED - * 6 | SATA3 LED - * 7 | SATA4 LED - * - * Data register configuration: - * - * data | LED brightness - * ------------------------------------------------- - * 0 | min (off) - * - | - - * 7 | max - * - * data | front LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | fix blue on - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | blink blue on=0.5 sec and blue off=2.5 sec - * - * data | SATA LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | SATA activity blink - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | fix blue on - */ - -static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 2, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 4, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 1, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = 7, -}; - -static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 7, - [NETXBIG_LED_SATA] = 1, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static struct netxbig_led_timer netxbig_v2_led_timer[] = { - [0] = { - .delay_on = 500, - .delay_off = 500, - .mode = NETXBIG_LED_TIMER1, - }, - [1] = { - .delay_on = 500, - .delay_off = 1000, - .mode = NETXBIG_LED_TIMER2, - }, -}; - -#define NETXBIG_LED(_name, maddr, mval, baddr) \ - { .name = _name, \ - .mode_addr = maddr, \ - .mode_val = mval, \ - .bright_addr = baddr } - -static struct netxbig_led net2big_v2_leds_ctrl[] = { - NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net2big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net2big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), -}; - -static struct netxbig_led net5big_v2_leds_ctrl[] = { - NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata5", 7, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net5big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net5big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), -}; - -static struct platform_device netxbig_v2_leds = { - .name = "leds-netxbig", - .id = -1, - .dev = { - .platform_data = &net2big_v2_leds_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int net2big_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Request power-off */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_GPIO, /* Rear power switch (on|auto) */ - MPP14_GPIO, /* USB fuse alarm */ - MPP15_GPIO, /* Rear power switch (auto|off) */ - MPP16_GPIO, /* SATA HDD1 power */ - MPP17_GPIO, /* SATA HDD2 power */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP24_GPIO, /* USB mode select */ - MPP26_GPIO, /* USB device vbus */ - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* GPIO extension ALE */ - MPP34_GPIO, /* Rear Push button */ - MPP35_GPIO, /* Inhibit switch power-off */ - MPP36_GPIO, /* SATA HDD1 presence */ - MPP37_GPIO, /* SATA HDD2 presence */ - MPP40_GPIO, /* eSATA presence */ - MPP44_GPIO, /* GPIO extension (data 0) */ - MPP45_GPIO, /* GPIO extension (data 1) */ - MPP46_GPIO, /* GPIO extension (data 2) */ - MPP47_GPIO, /* GPIO extension (addr 0) */ - MPP48_GPIO, /* GPIO extension (addr 1) */ - MPP49_GPIO, /* GPIO extension (addr 2) */ - 0 -}; - -static unsigned int net5big_v2_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Request power-off */ - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_GPIO, /* Rear power switch (on|auto) */ - MPP14_GPIO, /* USB fuse alarm */ - MPP15_GPIO, /* Rear power switch (auto|off) */ - MPP16_GPIO, /* SATA HDD1 power */ - MPP17_GPIO, /* SATA HDD2 power */ - MPP20_GE1_TXD0, - MPP21_GE1_TXD1, - MPP22_GE1_TXD2, - MPP23_GE1_TXD3, - MPP24_GE1_RXD0, - MPP25_GE1_RXD1, - MPP26_GE1_RXD2, - MPP27_GE1_RXD3, - MPP28_GPIO, /* USB enable host vbus */ - MPP29_GPIO, /* GPIO extension ALE */ - MPP30_GE1_RXCTL, - MPP31_GE1_RXCLK, - MPP32_GE1_TCLKOUT, - MPP33_GE1_TXCTL, - MPP34_GPIO, /* Rear Push button */ - MPP35_GPIO, /* Inhibit switch power-off */ - MPP36_GPIO, /* SATA HDD1 presence */ - MPP37_GPIO, /* SATA HDD2 presence */ - MPP38_GPIO, /* SATA HDD3 presence */ - MPP39_GPIO, /* SATA HDD4 presence */ - MPP40_GPIO, /* SATA HDD5 presence */ - MPP41_GPIO, /* SATA HDD3 power */ - MPP42_GPIO, /* SATA HDD4 power */ - MPP43_GPIO, /* SATA HDD5 power */ - MPP44_GPIO, /* GPIO extension (data 0) */ - MPP45_GPIO, /* GPIO extension (data 1) */ - MPP46_GPIO, /* GPIO extension (data 2) */ - MPP47_GPIO, /* GPIO extension (addr 0) */ - MPP48_GPIO, /* GPIO extension (addr 1) */ - MPP49_GPIO, /* GPIO extension (addr 2) */ - 0 -}; - -#define NETXBIG_V2_GPIO_POWER_OFF 7 - -static void netxbig_v2_power_off(void) -{ - gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1); -} - -static void __init netxbig_v2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - if (machine_is_net2big_v2()) - kirkwood_mpp_conf(net2big_v2_mpp_config); - else - kirkwood_mpp_conf(net5big_v2_mpp_config); - - if (machine_is_net2big_v2()) - lacie_v2_hdd_power_init(2); - else - lacie_v2_hdd_power_init(5); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&netxbig_v2_ge00_data); - if (machine_is_net5big_v2()) - kirkwood_ge01_init(&netxbig_v2_ge01_data); - kirkwood_sata_init(&netxbig_v2_sata_data); - kirkwood_uart0_init(); - lacie_v2_register_flash(); - lacie_v2_register_i2c_devices(); - - if (machine_is_net5big_v2()) - netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; - platform_device_register(&netxbig_v2_leds); - platform_device_register(&netxbig_v2_gpio_buttons); - - if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0) - pm_power_off = netxbig_v2_power_off; - else - pr_err("netxbig_v2: failed to configure power-off GPIO\n"); -} - -#ifdef CONFIG_MACH_NET2BIG_V2 -MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") - .atag_offset = 0x100, - .init_machine = netxbig_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_NET5BIG_V2 -MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") - .atag_offset = 0x100, - .init_machine = netxbig_v2_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c deleted file mode 100644 index e5cf84103583..000000000000 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * arch/arm/mach-kirkwood/openrd-setup.c - * - * Marvell OpenRD (Base|Client|Ultimate) Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/mmc-mvsdio.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition openrd_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M, - .mask_flags = MTD_WRITEABLE - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_4M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data openrd_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv643xx_eth_platform_data openrd_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(24), -}; - -static struct mv_sata_platform_data openrd_sata_data = { - .n_ports = 2, -}; - -static struct mvsdio_platform_data openrd_mvsdio_data = { - .gpio_card_detect = 29, /* MPP29 used as SD card detect */ - .gpio_write_protect = -1, -}; - -static unsigned int openrd_mpp_config[] __initdata = { - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP28_GPIO, - MPP29_GPIO, - MPP34_GPIO, - 0 -}; - -/* Configure MPP for UART1 */ -static unsigned int openrd_uart1_mpp_config[] __initdata = { - MPP13_UART1_TXD, - MPP14_UART1_RXD, - 0 -}; - -static struct i2c_board_info i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("cs42l51", 0x4a), - }, -}; - -static struct platform_device openrd_client_audio_device = { - .name = "openrd-client-audio", - .id = -1, -}; - -static int __initdata uart1; - -static int __init sd_uart_selection(char *str) -{ - uart1 = -EINVAL; - - /* Default is SD. Change if required, for UART */ - if (!str) - return 0; - - if (!strncmp(str, "232", 3)) { - uart1 = 232; - } else if (!strncmp(str, "485", 3)) { - /* OpenRD-Base doesn't have RS485. Treat is as an - * unknown argument & just have default setting - - * which is SD */ - if (machine_is_openrd_base()) { - uart1 = -ENODEV; - return 1; - } - - uart1 = 485; - } - return 1; -} -/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */ -__setup("kw_openrd_init_uart1=", sd_uart_selection); - -static int __init uart1_mpp_config(void) -{ - kirkwood_mpp_conf(openrd_uart1_mpp_config); - - if (gpio_request(34, "SD_UART1_SEL")) { - pr_err("GPIO request 34 failed for SD/UART1 selection\n"); - return -EIO; - } - - if (gpio_request(28, "RS232_RS485_SEL")) { - pr_err("GPIO request 28 failed for RS232/RS485 selection\n"); - gpio_free(34); - return -EIO; - } - - /* Select UART1 - * Pin # 34: 0 => UART1, 1 => SD */ - gpio_direction_output(34, 0); - - /* Select RS232 OR RS485 - * Pin # 28: 0 => RS232, 1 => RS485 */ - if (uart1 == 232) - gpio_direction_output(28, 0); - else - gpio_direction_output(28, 1); - - gpio_free(34); - gpio_free(28); - - return 0; -} - -static void __init openrd_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(openrd_mpp_config); - - kirkwood_uart0_init(); - kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts), - 25); - - kirkwood_ehci_init(); - - if (machine_is_openrd_ultimate()) { - openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1); - } - - kirkwood_ge00_init(&openrd_ge00_data); - if (!machine_is_openrd_base()) - kirkwood_ge01_init(&openrd_ge01_data); - - kirkwood_sata_init(&openrd_sata_data); - - kirkwood_i2c_init(); - - if (machine_is_openrd_client() || machine_is_openrd_ultimate()) { - platform_device_register(&openrd_client_audio_device); - i2c_register_board_info(0, i2c_board_info, - ARRAY_SIZE(i2c_board_info)); - kirkwood_audio_init(); - } - - if (uart1 <= 0) { - if (uart1 < 0) - pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n", - uart1); - - /* Select SD - * Pin # 34: 0 => UART1, 1 => SD */ - if (gpio_request(34, "SD_UART1_SEL")) { - pr_err("GPIO request 34 failed for SD/UART1 selection\n"); - } else { - - gpio_direction_output(34, 1); - gpio_free(34); - kirkwood_sdio_init(&openrd_mvsdio_data); - } - } else { - if (!uart1_mpp_config()) - kirkwood_uart1_init(); - } -} - -static int __init openrd_pci_init(void) -{ - if (machine_is_openrd_base() || - machine_is_openrd_client() || - machine_is_openrd_ultimate()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(openrd_pci_init); - -#ifdef CONFIG_MACH_OPENRD_BASE -MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") - /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .atag_offset = 0x100, - .init_machine = openrd_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_OPENRD_CLIENT -MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") - /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .atag_offset = 0x100, - .init_machine = openrd_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_OPENRD_ULTIMATE -MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") - /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ - .atag_offset = 0x100, - .init_machine = openrd_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c deleted file mode 100644 index 12d86f39f380..000000000000 --- a/arch/arm/mach-kirkwood/pcie.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * arch/arm/mach-kirkwood/pcie.c - * - * PCIe functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/clk.h> -#include <linux/mbus.h> -#include <video/vga.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <plat/pcie.h> -#include <mach/bridge-regs.h> -#include "common.h" - -/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ -#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4 -#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8 -#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4 -#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0 -#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4 -#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8 -#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4 -#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0 - -static void kirkwood_enable_pcie_clk(const char *port) -{ - struct clk *clk; - - clk = clk_get_sys("pcie", port); - if (IS_ERR(clk)) { - pr_err("PCIE clock %s missing\n", port); - return; - } - clk_prepare_enable(clk); - clk_put(clk); -} - -/* This function is called very early in the boot when probing the - hardware to determine what we actually are, and what rate tclk is - ticking at. Hence calling kirkwood_enable_pcie_clk() is not - possible since the clk tree has not been created yet. */ -void kirkwood_enable_pcie(void) -{ - u32 curr = readl(CLOCK_GATING_CTRL); - if (!(curr & CGC_PEX0)) - writel(curr | CGC_PEX0, CLOCK_GATING_CTRL); -} - -void kirkwood_pcie_id(u32 *dev, u32 *rev) -{ - kirkwood_enable_pcie(); - *dev = orion_pcie_dev_id(PCIE_VIRT_BASE); - *rev = orion_pcie_rev(PCIE_VIRT_BASE); -} - -struct pcie_port { - u8 root_bus_nr; - void __iomem *base; - spinlock_t conf_lock; - int irq; - struct resource res; -}; - -static int pcie_port_map[2]; -static int num_pcie_ports; - -static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) -{ - /* - * Don't go out when trying to access -- - * 1. nonexisting device on local bus - * 2. where there's no device connected (no link) - */ - if (bus == pp->root_bus_nr && dev == 0) - return 1; - - if (!orion_pcie_link_up(pp->base)) - return 0; - - if (bus == pp->root_bus_nr && dev != 1) - return 0; - - return 1; -} - - -/* - * PCIe config cycles are done by programming the PCIE_CONF_ADDR register - * and then reading the PCIE_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ - -static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - struct pci_sys_data *sys = bus->sysdata; - struct pcie_port *pp = sys->private_data; - unsigned long flags; - int ret; - - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - spin_lock_irqsave(&pp->conf_lock, flags); - ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); - spin_unlock_irqrestore(&pp->conf_lock, flags); - - return ret; -} - -static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - struct pci_sys_data *sys = bus->sysdata; - struct pcie_port *pp = sys->private_data; - unsigned long flags; - int ret; - - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - spin_lock_irqsave(&pp->conf_lock, flags); - ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); - spin_unlock_irqrestore(&pp->conf_lock, flags); - - return ret; -} - -static struct pci_ops pcie_ops = { - .read = pcie_rd_conf, - .write = pcie_wr_conf, -}; - -static void __init pcie0_ioresources_init(struct pcie_port *pp) -{ - pp->base = PCIE_VIRT_BASE; - pp->irq = IRQ_KIRKWOOD_PCIE; - - /* - * IORESOURCE_MEM - */ - pp->res.name = "PCIe 0 MEM"; - pp->res.start = KIRKWOOD_PCIE_MEM_PHYS_BASE; - pp->res.end = pp->res.start + KIRKWOOD_PCIE_MEM_SIZE - 1; - pp->res.flags = IORESOURCE_MEM; -} - -static void __init pcie1_ioresources_init(struct pcie_port *pp) -{ - pp->base = PCIE1_VIRT_BASE; - pp->irq = IRQ_KIRKWOOD_PCIE1; - - /* - * IORESOURCE_MEM - */ - pp->res.name = "PCIe 1 MEM"; - pp->res.start = KIRKWOOD_PCIE1_MEM_PHYS_BASE; - pp->res.end = pp->res.start + KIRKWOOD_PCIE1_MEM_SIZE - 1; - pp->res.flags = IORESOURCE_MEM; -} - -static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) -{ - struct pcie_port *pp; - int index; - - if (nr >= num_pcie_ports) - return 0; - - index = pcie_port_map[nr]; - pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index); - - pp = kzalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - panic("PCIe: failed to allocate pcie_port data"); - sys->private_data = pp; - pp->root_bus_nr = sys->busnr; - spin_lock_init(&pp->conf_lock); - - switch (index) { - case 0: - kirkwood_enable_pcie_clk("0"); - pcie0_ioresources_init(pp); - pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE_IO_PHYS_BASE); - break; - case 1: - kirkwood_enable_pcie_clk("1"); - pcie1_ioresources_init(pp); - pci_ioremap_io(SZ_64K * sys->busnr, - KIRKWOOD_PCIE1_IO_PHYS_BASE); - break; - default: - panic("PCIe setup: invalid controller %d", index); - } - - if (request_resource(&iomem_resource, &pp->res)) - panic("Request PCIe%d Memory resource failed\n", index); - - pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); - - /* - * Generic PCIe unit setup. - */ - orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - - orion_pcie_setup(pp->base); - - return 1; -} - -/* - * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it - * is operating as a root complex this needs to be switched to - * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on - * the device. Decoding setup is handled by the orion code. - */ -static void rc_pci_fixup(struct pci_dev *dev) -{ - if (dev->bus->parent == NULL && dev->devfn == 0) { - int i; - - dev->class &= 0xff; - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); - -static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - struct pci_sys_data *sys = dev->sysdata; - struct pcie_port *pp = sys->private_data; - - return pp->irq; -} - -static struct hw_pci kirkwood_pci __initdata = { - .setup = kirkwood_pcie_setup, - .map_irq = kirkwood_pcie_map_irq, - .ops = &pcie_ops, -}; - -static void __init add_pcie_port(int index, void __iomem *base) -{ - pcie_port_map[num_pcie_ports++] = index; - pr_info("Kirkwood PCIe port %d: link %s\n", index, - orion_pcie_link_up(base) ? "up" : "down"); -} - -void __init kirkwood_pcie_init(unsigned int portmask) -{ - mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET, - KIRKWOOD_MBUS_PCIE0_IO_ATTR, - KIRKWOOD_PCIE_IO_PHYS_BASE, - KIRKWOOD_PCIE_IO_SIZE, - KIRKWOOD_PCIE_IO_BUS_BASE); - mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET, - KIRKWOOD_MBUS_PCIE0_MEM_ATTR, - KIRKWOOD_PCIE_MEM_PHYS_BASE, - KIRKWOOD_PCIE_MEM_SIZE); - mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET, - KIRKWOOD_MBUS_PCIE1_IO_ATTR, - KIRKWOOD_PCIE1_IO_PHYS_BASE, - KIRKWOOD_PCIE1_IO_SIZE, - KIRKWOOD_PCIE1_IO_BUS_BASE); - mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET, - KIRKWOOD_MBUS_PCIE1_MEM_ATTR, - KIRKWOOD_PCIE1_MEM_PHYS_BASE, - KIRKWOOD_PCIE1_MEM_SIZE); - - vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE; - - if (portmask & KW_PCIE0) - add_pcie_port(0, PCIE_VIRT_BASE); - - if (portmask & KW_PCIE1) - add_pcie_port(1, PCIE1_VIRT_BASE); - - kirkwood_pci.nr_controllers = num_pcie_ports; - pci_common_init(&kirkwood_pci); -} diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c deleted file mode 100644 index 8e5e0329d04c..000000000000 --- a/arch/arm/mach-kirkwood/pm.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Power Management driver for Marvell Kirkwood SoCs - * - * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, - * version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/suspend.h> -#include <linux/io.h> -#include <mach/bridge-regs.h> -#include "common.h" - -static void __iomem *ddr_operation_base; -static void __iomem *memory_pm_ctrl; - -static void kirkwood_low_power(void) -{ - u32 mem_pm_ctrl; - - mem_pm_ctrl = readl(memory_pm_ctrl); - - /* Set peripherals to low-power mode */ - writel_relaxed(~0, memory_pm_ctrl); - - /* Set DDR in self-refresh */ - writel_relaxed(0x7, ddr_operation_base); - - /* - * Set CPU in wait-for-interrupt state. - * This disables the CPU core clocks, - * the array clocks, and also the L2 controller. - */ - cpu_do_idle(); - - writel_relaxed(mem_pm_ctrl, memory_pm_ctrl); -} - -static int kirkwood_suspend_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_STANDBY: - kirkwood_low_power(); - break; - default: - return -EINVAL; - } - return 0; -} - -static int kirkwood_pm_valid_standby(suspend_state_t state) -{ - return state == PM_SUSPEND_STANDBY; -} - -static const struct platform_suspend_ops kirkwood_suspend_ops = { - .enter = kirkwood_suspend_enter, - .valid = kirkwood_pm_valid_standby, -}; - -void __init kirkwood_pm_init(void) -{ - ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); - memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); - - suspend_set_ops(&kirkwood_suspend_ops); -} diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h deleted file mode 100644 index 21e7530f368b..000000000000 --- a/arch/arm/mach-kirkwood/pm.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Power Management driver for Marvell Kirkwood SoCs - * - * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, - * version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ARCH_KIRKWOOD_PM_H -#define __ARCH_KIRKWOOD_PM_H - -#ifdef CONFIG_PM -void kirkwood_pm_init(void); -#else -static inline void kirkwood_pm_init(void) {}; -#endif - -#endif diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c deleted file mode 100644 index e4fd3129d36f..000000000000 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c - * - * Marvell RD-88F6192-NAS Reference Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <plat/orion-gpio.h> -#include "common.h" - -#define RD88F6192_GPIO_USB_VBUS 10 - -static struct mv643xx_eth_platform_data rd88f6192_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv_sata_platform_data rd88f6192_sata_data = { - .n_ports = 2, -}; - -static const struct flash_platform_data rd88F6192_spi_slave_data = { - .type = "m25p128", -}; - -static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &rd88F6192_spi_slave_data, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static void __init rd88f6192_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - - orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1); - if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 || - gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0) - pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n"); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&rd88f6192_ge00_data); - kirkwood_sata_init(&rd88f6192_sata_data); - spi_register_board_info(rd88F6192_spi_slave_info, - ARRAY_SIZE(rd88F6192_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_uart0_init(); -} - -static int __init rd88f6192_pci_init(void) -{ - if (machine_is_rd88f6192_nas()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(rd88f6192_pci_init); - -MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") - /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .atag_offset = 0x100, - .init_machine = rd88f6192_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c deleted file mode 100644 index 5154bd2a3ad3..000000000000 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/arm/mach-kirkwood/rd88f6281-setup.c - * - * Marvell RD-88F6281 Reference Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/ethtool.h> -#include <net/dsa.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <linux/platform_data/mmc-mvsdio.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition rd88f6281_nand_parts[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_1M - }, { - .name = "uImage", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_2M - }, { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL - }, -}; - -static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct dsa_chip_data rd88f6281_switch_chip_data = { - .port_names[0] = "lan1", - .port_names[1] = "lan2", - .port_names[2] = "lan3", - .port_names[3] = "lan4", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data rd88f6281_switch_plat_data = { - .nr_chips = 1, - .chip = &rd88f6281_switch_chip_data, -}; - -static struct mv643xx_eth_platform_data rd88f6281_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(11), -}; - -static struct mv_sata_platform_data rd88f6281_sata_data = { - .n_ports = 2, -}; - -static struct mvsdio_platform_data rd88f6281_mvsdio_data = { - .gpio_card_detect = 28, - .gpio_write_protect = -1, -}; - -static unsigned int rd88f6281_mpp_config[] __initdata = { - MPP28_GPIO, - 0 -}; - -static void __init rd88f6281_init(void) -{ - u32 dev, rev; - - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(rd88f6281_mpp_config); - - kirkwood_nand_init(rd88f6281_nand_parts, - ARRAY_SIZE(rd88f6281_nand_parts), - 25); - kirkwood_ehci_init(); - - kirkwood_ge00_init(&rd88f6281_ge00_data); - kirkwood_pcie_id(&dev, &rev); - if (rev == MV88F6281_REV_A0) { - rd88f6281_switch_chip_data.sw_addr = 10; - kirkwood_ge01_init(&rd88f6281_ge01_data); - } else { - rd88f6281_switch_chip_data.port_names[4] = "wan"; - } - kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ); - - kirkwood_sata_init(&rd88f6281_sata_data); - kirkwood_sdio_init(&rd88f6281_mvsdio_data); - kirkwood_uart0_init(); -} - -static int __init rd88f6281_pci_init(void) -{ - if (machine_is_rd88f6281()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(rd88f6281_pci_init); - -MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") - /* Maintainer: Saeed Bishara <saeed@marvell.com> */ - .atag_offset = 0x100, - .init_machine = rd88f6281_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c deleted file mode 100644 index 8736f8c97518..000000000000 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * - * HP t5325 Thin Client setup - * - * Copyright (C) 2010 Martin Michlmayr <tbm@cyrius.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/i2c.h> -#include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <sound/alc5623.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include "common.h" -#include "mpp.h" - -static struct mtd_partition hp_t5325_partitions[] = { - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_256K, - }, - { - .name = "permanent u-boot env", - .size = SZ_64K, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "HP env", - .size = SZ_64K, - .offset = MTDPART_OFS_APPEND, - }, - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "SSD firmware", - .size = SZ_256K, - .offset = SZ_512K, - }, -}; - -static const struct flash_platform_data hp_t5325_flash = { - .type = "mx25l8005", - .name = "spi_flash", - .parts = hp_t5325_partitions, - .nr_parts = ARRAY_SIZE(hp_t5325_partitions), -}; - -static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &hp_t5325_flash, - .irq = -1, - }, -}; - -static struct mv643xx_eth_platform_data hp_t5325_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv_sata_platform_data hp_t5325_sata_data = { - .n_ports = 2, -}; - -static struct gpio_keys_button hp_t5325_buttons[] = { - { - .code = KEY_POWER, - .gpio = 45, - .desc = "Power", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data hp_t5325_button_data = { - .buttons = hp_t5325_buttons, - .nbuttons = ARRAY_SIZE(hp_t5325_buttons), -}; - -static struct platform_device hp_t5325_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &hp_t5325_button_data, - } -}; - -static struct platform_device hp_t5325_audio_device = { - .name = "t5325-audio", - .id = -1, -}; - -static unsigned int hp_t5325_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_SPI_SCn, - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_GPIO, - MPP14_GPIO, - MPP15_GPIO, - MPP16_GPIO, - MPP17_GPIO, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP32_GPIO, - MPP33_GE1_TXCTL, - MPP39_AU_I2SBCLK, - MPP40_AU_I2SDO, - MPP43_AU_I2SDI, - MPP41_AU_I2SLRCLK, - MPP42_AU_I2SMCLK, - MPP45_GPIO, /* Power button */ - MPP48_GPIO, /* Board power off */ - 0 -}; - -static struct alc5623_platform_data alc5621_data = { - .add_ctrl = 0x3700, - .jack_det_ctrl = 0x4810, -}; - -static struct i2c_board_info i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("alc5621", 0x1a), - .platform_data = &alc5621_data, - }, -}; - -#define HP_T5325_GPIO_POWER_OFF 48 - -static void hp_t5325_power_off(void) -{ - gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1); -} - -static void __init hp_t5325_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(hp_t5325_mpp_config); - - kirkwood_uart0_init(); - spi_register_board_info(hp_t5325_spi_slave_info, - ARRAY_SIZE(hp_t5325_spi_slave_info)); - kirkwood_spi_init(); - kirkwood_i2c_init(); - kirkwood_ge00_init(&hp_t5325_ge00_data); - kirkwood_sata_init(&hp_t5325_sata_data); - kirkwood_ehci_init(); - platform_device_register(&hp_t5325_button_device); - platform_device_register(&hp_t5325_audio_device); - - i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); - kirkwood_audio_init(); - - if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0) - pm_power_off = hp_t5325_power_off; - else - pr_err("t5325: failed to configure power-off GPIO\n"); -} - -static int __init hp_t5325_pci_init(void) -{ - if (machine_is_t5325()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(hp_t5325_pci_init); - -MACHINE_START(T5325, "HP t5325 Thin Client") - /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .atag_offset = 0x100, - .init_machine = hp_t5325_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c deleted file mode 100644 index e1267d6b468f..000000000000 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * - * QNAP TS-11x/TS-21x Turbo NAS Board Setup - * - * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> - * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include "common.h" -#include "mpp.h" -#include "tsx1x-common.h" - -static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = { - I2C_BOARD_INFO("s35390a", 0x30), -}; - -static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv_sata_platform_data qnap_ts219_sata_data = { - .n_ports = 2, -}; - -static struct gpio_keys_button qnap_ts219_buttons[] = { - { - .code = KEY_COPY, - .gpio = 15, - .desc = "USB Copy", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 16, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data qnap_ts219_button_data = { - .buttons = qnap_ts219_buttons, - .nbuttons = ARRAY_SIZE(qnap_ts219_buttons), -}; - -static struct platform_device qnap_ts219_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &qnap_ts219_button_data, - } -}; - -static unsigned int qnap_ts219_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_SATA1_ACTn, - MPP5_SATA0_ACTn, - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_UART1_TXD, /* PIC controller */ - MPP14_UART1_RXD, /* PIC controller */ - MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ - MPP16_GPIO, /* Reset button (on devices with 88F6281) */ - MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ - MPP37_GPIO, /* Reset button (on devices with 88F6282) */ - MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ - MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ - 0 -}; - -static void __init qnap_ts219_init(void) -{ - u32 dev, rev; - - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(qnap_ts219_mpp_config); - - kirkwood_uart0_init(); - kirkwood_uart1_init(); /* A PIC controller is connected here. */ - qnap_tsx1x_register_flash(); - kirkwood_i2c_init(); - i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); - - kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6282_DEV_ID) { - qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */ - qnap_ts219_buttons[1].gpio = 37; /* Reset button */ - qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - } - - kirkwood_ge00_init(&qnap_ts219_ge00_data); - kirkwood_sata_init(&qnap_ts219_sata_data); - kirkwood_ehci_init(); - platform_device_register(&qnap_ts219_button_device); - - pm_power_off = qnap_tsx1x_power_off; - -} - -static int __init ts219_pci_init(void) -{ - if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); - - return 0; -} -subsys_initcall(ts219_pci_init); - -MACHINE_START(TS219, "QNAP TS-119/TS-219") - /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .atag_offset = 0x100, - .init_machine = qnap_ts219_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c deleted file mode 100644 index 81d585806b2f..000000000000 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * - * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup - * - * Copyright (C) 2009-2010 Martin Michlmayr <tbm@cyrius.com> - * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/io.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include "common.h" -#include "mpp.h" -#include "tsx1x-common.h" - -/* for the PCIe reset workaround */ -#include <plat/pcie.h> - - -#define QNAP_TS41X_JUMPER_JP1 45 - -static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { - I2C_BOARD_INFO("s35390a", 0x30), -}; - -static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv_sata_platform_data qnap_ts41x_sata_data = { - .n_ports = 2, -}; - -static struct gpio_keys_button qnap_ts41x_buttons[] = { - { - .code = KEY_COPY, - .gpio = 43, - .desc = "USB Copy", - .active_low = 1, - }, - { - .code = KEY_RESTART, - .gpio = 37, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data qnap_ts41x_button_data = { - .buttons = qnap_ts41x_buttons, - .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons), -}; - -static struct platform_device qnap_ts41x_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &qnap_ts41x_button_data, - } -}; - -static unsigned int qnap_ts41x_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP6_SYSRST_OUTn, - MPP7_PEX_RST_OUTn, - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_UART1_TXD, /* PIC controller */ - MPP14_UART1_RXD, /* PIC controller */ - MPP15_SATA0_ACTn, - MPP16_SATA1_ACTn, - MPP20_GE1_TXD0, - MPP21_GE1_TXD1, - MPP22_GE1_TXD2, - MPP23_GE1_TXD3, - MPP24_GE1_RXD0, - MPP25_GE1_RXD1, - MPP26_GE1_RXD2, - MPP27_GE1_RXD3, - MPP30_GE1_RXCTL, - MPP31_GE1_RXCLK, - MPP32_GE1_TCLKOUT, - MPP33_GE1_TXCTL, - MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ - MPP37_GPIO, /* Reset button */ - MPP43_GPIO, /* USB Copy button */ - MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */ - MPP45_GPIO, /* JP1: 0: LCD, 1: serial console */ - MPP46_GPIO, /* External SATA HDD1 error indicator */ - MPP47_GPIO, /* External SATA HDD2 error indicator */ - MPP48_GPIO, /* External SATA HDD3 error indicator */ - MPP49_GPIO, /* External SATA HDD4 error indicator */ - 0 -}; - -static void __init qnap_ts41x_init(void) -{ - u32 dev, rev; - - /* - * Basic setup. Needs to be called early. - */ - kirkwood_init(); - kirkwood_mpp_conf(qnap_ts41x_mpp_config); - - kirkwood_uart0_init(); - kirkwood_uart1_init(); /* A PIC controller is connected here. */ - qnap_tsx1x_register_flash(); - kirkwood_i2c_init(); - i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1); - - kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6282_DEV_ID) { - qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1); - } - kirkwood_ge00_init(&qnap_ts41x_ge00_data); - kirkwood_ge01_init(&qnap_ts41x_ge01_data); - - kirkwood_sata_init(&qnap_ts41x_sata_data); - kirkwood_ehci_init(); - platform_device_register(&qnap_ts41x_button_device); - - pm_power_off = qnap_tsx1x_power_off; - - if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0) - gpio_export(QNAP_TS41X_JUMPER_JP1, 0); -} - -static int __init ts41x_pci_init(void) -{ - if (machine_is_ts41x()) { - u32 dev, rev; - - /* - * Without this explicit reset, the PCIe SATA controller - * (Marvell 88sx7042/sata_mv) is known to stop working - * after a few minutes. - */ - orion_pcie_reset(PCIE_VIRT_BASE); - - kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6282_DEV_ID) - kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); - else - kirkwood_pcie_init(KW_PCIE0); - } - return 0; -} -subsys_initcall(ts41x_pci_init); - -MACHINE_START(TS41X, "QNAP TS-41x") - /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .atag_offset = 0x100, - .init_machine = qnap_ts41x_init, - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .init_time = kirkwood_timer_init, - .restart = kirkwood_restart, -MACHINE_END diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c deleted file mode 100644 index cec87cef76ca..000000000000 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ /dev/null @@ -1,113 +0,0 @@ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/serial_reg.h> -#include <mach/kirkwood.h> -#include "common.h" -#include "tsx1x-common.h" - -/* - * QNAP TS-x1x Boards flash - */ - -/**************************************************************************** - * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatibility with - * the QNAP firmware. - * Layout as used by QNAP: - * 0x00000000-0x00080000 : "U-Boot" - * 0x00200000-0x00400000 : "Kernel" - * 0x00400000-0x00d00000 : "RootFS" - * 0x00d00000-0x01000000 : "RootFS2" - * 0x00080000-0x000c0000 : "U-Boot Config" - * 0x000c0000-0x00200000 : "NAS Config" - * - * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout - * used by the QNAP TS-109/TS-209. - * - ***************************************************************************/ - -static struct mtd_partition qnap_tsx1x_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0x00200000, - }, { - .name = "RootFS1", - .size = 0x00900000, - .offset = 0x00400000, - }, { - .name = "RootFS2", - .size = 0x00300000, - .offset = 0x00d00000, - }, { - .name = "U-Boot Config", - .size = 0x00040000, - .offset = 0x00080000, - }, { - .name = "NAS Config", - .size = 0x00140000, - .offset = 0x000c0000, - }, -}; - -static const struct flash_platform_data qnap_tsx1x_flash = { - .type = "m25p128", - .name = "spi_flash", - .parts = qnap_tsx1x_partitions, - .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions), -}; - -static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &qnap_tsx1x_flash, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -void __init qnap_tsx1x_register_flash(void) -{ - spi_register_board_info(qnap_tsx1x_spi_slave_info, - ARRAY_SIZE(qnap_tsx1x_spi_slave_info)); - kirkwood_spi_init(); -} - - -/***************************************************************************** - * QNAP TS-x1x specific power off method via UART1-attached PIC - ****************************************************************************/ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -void qnap_tsx1x_power_off(void) -{ - /* 19200 baud divisor */ - const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack UART1 and reset into sane state (19200,8n1) */ - writel(0x83, UART1_REG(LCR)); - writel(divisor & 0xff, UART1_REG(DLL)); - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); - writel(0x03, UART1_REG(LCR)); - writel(0x00, UART1_REG(IER)); - writel(0x00, UART1_REG(FCR)); - writel(0x00, UART1_REG(MCR)); - - /* send the power-off command 'A' to PIC */ - writel('A', UART1_REG(TX)); -} - diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h deleted file mode 100644 index 7fa037361b55..000000000000 --- a/arch/arm/mach-kirkwood/tsx1x-common.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H -#define __ARCH_KIRKWOOD_TSX1X_COMMON_H - -extern void __init qnap_tsx1x_register_flash(void); -extern void qnap_tsx1x_power_off(void); - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h index 95e731a7ed6a..ab0d27fa8969 100644 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ b/arch/arm/mach-ks8695/include/mach/memory.h @@ -15,11 +15,6 @@ #include <mach/hardware.h> -/* - * Physical SRAM offset. - */ -#define PLAT_PHYS_OFFSET KS8695_SDRAM_PA - #ifndef __ASSEMBLY__ #ifdef CONFIG_PCI diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig new file mode 100644 index 000000000000..2c043a210db0 --- /dev/null +++ b/arch/arm/mach-mediatek/Kconfig @@ -0,0 +1,6 @@ +config ARCH_MEDIATEK + bool "Mediatek MT6589 SoC" if ARCH_MULTI_V7 + select ARM_GIC + select MTK_TIMER + help + Support for Mediatek Cortex-A7 Quad-Core-SoC MT6589. diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile new file mode 100644 index 000000000000..43e619f56172 --- /dev/null +++ b/arch/arm/mach-mediatek/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-mediatek/mediatek.c index 201842a3769e..f2acf075350d 100644 --- a/arch/arm/mach-s5pc100/include/mach/dma.h +++ b/arch/arm/mach-mediatek/mediatek.c @@ -1,6 +1,8 @@ /* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> + * Device Tree support for Mediatek SoCs + * + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger <matthias.bgg@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,16 +13,15 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/init.h> +#include <asm/mach/arch.h> -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common DMA API driver for PL330 */ -#include <plat/dma-pl330.h> +static const char * const mediatek_board_dt_compat[] = { + "mediatek,mt6589", + NULL, +}; -#endif /* __MACH_DMA_H */ +DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)") + .dt_compat = mediatek_board_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index fbd7ee8e4897..8c78f2b16452 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -23,7 +23,6 @@ #define SM_nCS0_nCS0 MFP_CFG(SM_nCS0, AF0) #define SM_ADV_SM_ADV MFP_CFG(SM_ADV, AF0) #define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0) -#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0) #define SM_BE0_SM_BE0 MFP_CFG(SM_BE0, AF1) #define SM_BE1_SM_BE1 MFP_CFG(SM_BE1, AF1) diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 9b26976fb084..a6b50e62a495 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -106,7 +106,4 @@ config MSM_GPIOMUX help Support for MSM V1 TLMM GPIOMUX architecture. -config MSM_SCM - bool - endif diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index b9bc599a5fd0..c1e4567a5ab3 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -14,11 +14,15 @@ menuconfig ARCH_MVEBU if ARCH_MVEBU +config MACH_MVEBU_ANY + bool + config MACH_MVEBU_V7 bool select ARMADA_370_XP_TIMER select CACHE_L2X0 select ARM_CPU_SUSPEND + select MACH_MVEBU_ANY config MACH_ARMADA_370 bool "Marvell Armada 370 boards" if ARCH_MULTI_V7 @@ -75,6 +79,7 @@ config MACH_DOVE select CACHE_L2X0 select CPU_PJ4 select DOVE_CLK + select MACH_MVEBU_ANY select ORION_IRQCHIP select ORION_TIMER select PINCTRL_DOVE @@ -87,6 +92,7 @@ config MACH_KIRKWOOD select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK + select MACH_MVEBU_ANY select ORION_IRQCHIP select ORION_TIMER select PCI @@ -96,4 +102,11 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. +config MACH_NETXBIG + bool "LaCie 2Big and 5Big Network v2" + depends on MACH_KIRKWOOD + help + Say 'Y' here if you want your kernel to support the + LaCie 2Big and 5Big Network v2 + endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 1636cdbef01a..e24136b42765 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -4,13 +4,13 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a CFLAGS_pmsu.o := -march=armv7-a -obj-y += system-controller.o mvebu-soc-id.o +obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o ifeq ($(CONFIG_MACH_MVEBU_V7),y) obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o endif obj-$(CONFIG_MACH_DOVE) += dove.o obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o +obj-$(CONFIG_MACH_NETXBIG) += netxbig.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index c3465f5b1250..84cd90d9b860 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -24,4 +24,6 @@ void armada_xp_secondary_startup(void); extern struct smp_operations armada_xp_smp_ops; #endif +int armada_370_xp_pmsu_idle_enter(unsigned long deepidle); + #endif /* __MACH_ARMADA_370_XP_H */ diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index b2524d689f21..6478626e3ff6 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -34,14 +34,14 @@ #include "coherency.h" #include "mvebu-soc-id.h" +static void __iomem *scu_base; + /* * Enables the SCU when available. Obviously, this is only useful on * Cortex-A based SOCs, not on PJ4B based ones. */ static void __init mvebu_scu_enable(void) { - void __iomem *scu_base; - struct device_node *np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); if (np) { @@ -51,6 +51,11 @@ static void __init mvebu_scu_enable(void) } } +void __iomem *mvebu_get_scu_base(void) +{ + return scu_base; +} + /* * Early versions of Armada 375 SoC have a bug where the BootROM * leaves an external data abort pending. The kernel is hit by this @@ -125,8 +130,16 @@ static void __init thermal_quirk(void) { struct device_node *np; u32 dev, rev; + int res; - if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + /* + * The early SoC Z1 revision needs a quirk to be applied in order + * for the thermal controller to work properly. This quirk breaks + * the thermal support if applied on a SoC that doesn't need it, + * so we enforce the SoC revision to be known. + */ + res = mvebu_get_soc_id(&dev, &rev); + if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV)) return; for_each_compatible_node(np, NULL, "marvell,armada375-thermal") { @@ -160,7 +173,8 @@ static void __init thermal_quirk(void) /* * The thermal controller needs some quirk too, so let's change - * the compatible string to reflect this. + * the compatible string to reflect this and allow the driver + * the take the necessary action. */ prop = kzalloc(sizeof(*prop), GFP_KERNEL); prop->name = kstrdup("compatible", GFP_KERNEL); diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h index 9c7bb4386f8b..98e32cc2ef3d 100644 --- a/arch/arm/mach-mvebu/board.h +++ b/arch/arm/mach-mvebu/board.h @@ -13,4 +13,9 @@ #ifndef __ARCH_MVEBU_BOARD_H #define __ARCH_MVEBU_BOARD_H +#ifdef CONFIG_MACH_NETXBIG +void netxbig_init(void); +#else +static inline void netxbig_init(void) {}; +#endif #endif diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 510c29e079ca..f5d881b5d0f7 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -46,7 +46,7 @@ ENTRY(ll_get_coherency_base) ldr r1, =coherency_base ldr r1, [r1] 2: - mov pc, lr + ret lr ENDPROC(ll_get_coherency_base) /* @@ -63,7 +63,7 @@ ENTRY(ll_get_coherency_cpumask) mov r2, #(1 << 24) lsl r3, r2, r3 ARM_BE8(rev r3, r3) - mov pc, lr + ret lr ENDPROC(ll_get_coherency_cpumask) /* @@ -94,7 +94,7 @@ ENTRY(ll_add_cpu_to_smp_group) strex r1, r2, [r0] cmp r1, #0 bne 1b - mov pc, lr + ret lr ENDPROC(ll_add_cpu_to_smp_group) ENTRY(ll_enable_coherency) @@ -118,7 +118,7 @@ ENTRY(ll_enable_coherency) bne 1b dsb mov r0, #0 - mov pc, lr + ret lr ENDPROC(ll_enable_coherency) ENTRY(ll_disable_coherency) @@ -141,7 +141,7 @@ ENTRY(ll_disable_coherency) cmp r1, #0 bne 1b dsb - mov pc, lr + ret lr ENDPROC(ll_disable_coherency) .align 2 diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h index b67fb7a10d8b..3ccb40c3bf94 100644 --- a/arch/arm/mach-mvebu/common.h +++ b/arch/arm/mach-mvebu/common.h @@ -21,7 +21,8 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd); int mvebu_cpu_reset_deassert(int cpu); void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr); void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr); +int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev); -void armada_xp_cpu_die(unsigned int cpu); +void __iomem *mvebu_get_scu_base(void); #endif diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c index 4a8f9eebebea..60fb53787004 100644 --- a/arch/arm/mach-mvebu/cpu-reset.c +++ b/arch/arm/mach-mvebu/cpu-reset.c @@ -67,7 +67,7 @@ static int mvebu_cpu_reset_map(struct device_node *np, int res_idx) return 0; } -int __init mvebu_cpu_reset_init(void) +static int __init mvebu_cpu_reset_init(void) { struct device_node *np; int res_idx; diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S index da5bb292b91c..be51c998c0cd 100644 --- a/arch/arm/mach-mvebu/headsmp-a9.S +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -18,21 +18,6 @@ #include <asm/assembler.h> __CPUINIT -#define CPU_RESUME_ADDR_REG 0xf10182d4 - -.global armada_375_smp_cpu1_enable_code_start -.global armada_375_smp_cpu1_enable_code_end - -armada_375_smp_cpu1_enable_code_start: -ARM_BE8(setend be) - adr r0, 1f - ldr r0, [r0] - ldr r1, [r0] -ARM_BE8(rev r1, r1) - mov pc, r1 -1: - .word CPU_RESUME_ADDR_REG -armada_375_smp_cpu1_enable_code_end: ENTRY(mvebu_cortex_a9_secondary_startup) ARM_BE8(setend be) diff --git a/arch/arm/mach-mvebu/hotplug.c b/arch/arm/mach-mvebu/hotplug.c deleted file mode 100644 index d95e91047168..000000000000 --- a/arch/arm/mach-mvebu/hotplug.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Symmetric Multi Processing (SMP) support for Armada XP - * - * Copyright (C) 2012 Marvell - * - * Lior Amsalem <alior@marvell.com> - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> -#include <asm/proc-fns.h> -#include "common.h" - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void __ref armada_xp_cpu_die(unsigned int cpu) -{ - cpu_do_idle(); - - /* We should never return from idle */ - panic("mvebu: cpu %d unexpectedly exit from shutdown\n", cpu); -} diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 46f105913c84..6b5310828eb2 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -180,6 +180,9 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); + if (of_machine_is_compatible("lacie,netxbig")) + netxbig_init(); + of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c index d0f35b4d4a23..a99434bcee84 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.c +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -25,6 +25,7 @@ #include <linux/of_address.h> #include <linux/slab.h> #include <linux/sys_soc.h> +#include "common.h" #include "mvebu-soc-id.h" #define PCIE_DEV_ID_OFF 0x0 @@ -51,10 +52,10 @@ int mvebu_get_soc_id(u32 *dev, u32 *rev) *rev = soc_rev; return 0; } else - return -1; + return -ENODEV; } -static int __init mvebu_soc_id_init(void) +static int __init get_soc_id_by_pci(void) { struct device_node *np; int ret = 0; @@ -129,6 +130,22 @@ clk_err: return ret; } + +static int __init mvebu_soc_id_init(void) +{ + + /* + * First try to get the ID and the revision by the system + * register and use PCI registers only if it is not possible + */ + if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev)) { + is_id_valid = true; + pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev); + return 0; + } + + return get_soc_id_by_pci(); +} early_initcall(mvebu_soc_id_init); static int __init mvebu_soc_device(void) diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c new file mode 100644 index 000000000000..94b11b6585a4 --- /dev/null +++ b/arch/arm/mach-mvebu/netxbig.c @@ -0,0 +1,191 @@ +/* + * arch/arm/mach-mvbu/board-netxbig.c + * + * LaCie 2Big and 5Big Network v2 board setup + * + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/platform_data/leds-kirkwood-netxbig.h> +#include "common.h" + +/***************************************************************************** + * GPIO extension LEDs + ****************************************************************************/ + +/* + * The LEDs are controlled by a CPLD and can be configured through a GPIO + * extension bus: + * + * - address register : bit [0-2] -> GPIO [47-49] + * - data register : bit [0-2] -> GPIO [44-46] + * - enable register : GPIO 29 + */ + +static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; +static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; + +static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { + .addr = netxbig_v2_gpio_ext_addr, + .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), + .data = netxbig_v2_gpio_ext_data, + .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), + .enable = 29, +}; + +/* + * Address register selection: + * + * addr | register + * ---------------------------- + * 0 | front LED + * 1 | front LED brightness + * 2 | SATA LED brightness + * 3 | SATA0 LED + * 4 | SATA1 LED + * 5 | SATA2 LED + * 6 | SATA3 LED + * 7 | SATA4 LED + * + * Data register configuration: + * + * data | LED brightness + * ------------------------------------------------- + * 0 | min (off) + * - | - + * 7 | max + * + * data | front LED mode + * ------------------------------------------------- + * 0 | fix off + * 1 | fix blue on + * 2 | fix red on + * 3 | blink blue on=1 sec and blue off=1 sec + * 4 | blink red on=1 sec and red off=1 sec + * 5 | blink blue on=2.5 sec and red on=0.5 sec + * 6 | blink blue on=1 sec and red on=1 sec + * 7 | blink blue on=0.5 sec and blue off=2.5 sec + * + * data | SATA LED mode + * ------------------------------------------------- + * 0 | fix off + * 1 | SATA activity blink + * 2 | fix red on + * 3 | blink blue on=1 sec and blue off=1 sec + * 4 | blink red on=1 sec and red off=1 sec + * 5 | blink blue on=2.5 sec and red on=0.5 sec + * 6 | blink blue on=1 sec and red on=1 sec + * 7 | fix blue on + */ + +static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 2, + [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, + [NETXBIG_LED_TIMER1] = 4, + [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, +}; + +static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 1, + [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, + [NETXBIG_LED_TIMER1] = 3, + [NETXBIG_LED_TIMER2] = 7, +}; + +static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { + [NETXBIG_LED_OFF] = 0, + [NETXBIG_LED_ON] = 7, + [NETXBIG_LED_SATA] = 1, + [NETXBIG_LED_TIMER1] = 3, + [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, +}; + +static struct netxbig_led_timer netxbig_v2_led_timer[] = { + [0] = { + .delay_on = 500, + .delay_off = 500, + .mode = NETXBIG_LED_TIMER1, + }, + [1] = { + .delay_on = 500, + .delay_off = 1000, + .mode = NETXBIG_LED_TIMER2, + }, +}; + +#define NETXBIG_LED(_name, maddr, mval, baddr) \ + { .name = _name, \ + .mode_addr = maddr, \ + .mode_val = mval, \ + .bright_addr = baddr } + +static struct netxbig_led net2big_v2_leds_ctrl[] = { + NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), + NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), + NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), + NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), +}; + +static struct netxbig_led_platform_data net2big_v2_leds_data = { + .gpio_ext = &netxbig_v2_gpio_ext, + .timer = netxbig_v2_led_timer, + .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), + .leds = net2big_v2_leds_ctrl, + .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), +}; + +static struct netxbig_led net5big_v2_leds_ctrl[] = { + NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), + NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), + NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), + NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), + NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2), +}; + +static struct netxbig_led_platform_data net5big_v2_leds_data = { + .gpio_ext = &netxbig_v2_gpio_ext, + .timer = netxbig_v2_led_timer, + .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), + .leds = net5big_v2_leds_ctrl, + .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), +}; + +static struct platform_device netxbig_v2_leds = { + .name = "leds-netxbig", + .id = -1, + .dev = { + .platform_data = &net2big_v2_leds_data, + }, +}; + +void __init netxbig_init(void) +{ + + if (of_machine_is_compatible("lacie,net5big_v2")) + netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; + platform_device_register(&netxbig_v2_leds); +} diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c index 96c2c59e34b6..47a71a924b96 100644 --- a/arch/arm/mach-mvebu/platsmp-a9.c +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -20,33 +20,8 @@ #include <asm/smp_scu.h> #include <asm/smp_plat.h> #include "common.h" -#include "mvebu-soc-id.h" #include "pmsu.h" -#define CRYPT0_ENG_ID 41 -#define CRYPT0_ENG_ATTR 0x1 -#define SRAM_PHYS_BASE 0xFFFF0000 - -#define BOOTROM_BASE 0xFFF00000 -#define BOOTROM_SIZE 0x100000 - -extern unsigned char armada_375_smp_cpu1_enable_code_end; -extern unsigned char armada_375_smp_cpu1_enable_code_start; - -void armada_375_smp_cpu1_enable_wa(void) -{ - void __iomem *sram_virt_base; - - mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); - mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR, - SRAM_PHYS_BASE, SZ_64K); - sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K); - - memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start, - &armada_375_smp_cpu1_enable_code_end - - &armada_375_smp_cpu1_enable_code_start); -} - extern void mvebu_cortex_a9_secondary_startup(void); static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu, @@ -63,21 +38,10 @@ static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu, * address. */ hw_cpu = cpu_logical_map(cpu); - - if (of_machine_is_compatible("marvell,armada375")) { - u32 dev, rev; - - if (mvebu_get_soc_id(&dev, &rev) == 0 && - rev == ARMADA_375_Z1_REV) - armada_375_smp_cpu1_enable_wa(); - + if (of_machine_is_compatible("marvell,armada375")) mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup); - } - else { - mvebu_pmsu_set_cpu_boot_addr(hw_cpu, - mvebu_cortex_a9_secondary_startup); - } - + else + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cortex_a9_secondary_startup); smp_wmb(); ret = mvebu_cpu_reset_deassert(hw_cpu); if (ret) { @@ -91,9 +55,6 @@ static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu, static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = { .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = armada_xp_cpu_die, -#endif }; CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp", diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index 88b976b31719..895dc373c8a1 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -67,6 +67,7 @@ static void __init set_secondary_cpus_clock(void) if (!cpu_clk) return; clk_set_rate(cpu_clk, rate); + clk_prepare_enable(cpu_clk); } } @@ -78,6 +79,17 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) hw_cpu = cpu_logical_map(cpu); mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); + + /* + * This is needed to wake up CPUs in the offline state after + * using CPU hotplug. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + /* + * This is needed to take secondary CPUs out of reset on the + * initial boot. + */ ret = mvebu_cpu_reset_deassert(hw_cpu); if (ret) { pr_warn("unable to boot CPU: %d\n", ret); @@ -87,6 +99,19 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } +/* + * When a CPU is brought back online, either through CPU hotplug, or + * because of the boot of a kexec'ed kernel, the PMSU configuration + * for this CPU might be in the deep idle state, preventing this CPU + * from receiving interrupts. Here, we therefore take out the current + * CPU from this state, which was entered by armada_xp_cpu_die() + * below. + */ +static void armada_xp_secondary_init(unsigned int cpu) +{ + mvebu_v7_pmsu_idle_exit(); +} + static void __init armada_xp_smp_init_cpus(void) { unsigned int ncores = num_possible_cpus(); @@ -122,12 +147,36 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) panic("The address for the BootROM is incorrect"); } +#ifdef CONFIG_HOTPLUG_CPU +static void armada_xp_cpu_die(unsigned int cpu) +{ + /* + * CPU hotplug is implemented by putting offline CPUs into the + * deep idle sleep state. + */ + armada_370_xp_pmsu_idle_enter(true); +} + +/* + * We need a dummy function, so that platform_can_cpu_hotplug() knows + * we support CPU hotplug. However, the function does not need to do + * anything, because CPUs going offline can enter the deep idle state + * by themselves, without any help from a still alive CPU. + */ +static int armada_xp_cpu_kill(unsigned int cpu) +{ + return 1; +} +#endif + struct smp_operations armada_xp_smp_ops __initdata = { .smp_init_cpus = armada_xp_smp_init_cpus, .smp_prepare_cpus = armada_xp_smp_prepare_cpus, .smp_boot_secondary = armada_xp_boot_secondary, + .smp_secondary_init = armada_xp_secondary_init, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = armada_xp_cpu_die, + .cpu_kill = armada_xp_cpu_kill, #endif }; diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 25aa8237d668..8a70a51533fd 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -18,22 +18,29 @@ #define pr_fmt(fmt) "mvebu-pmsu: " fmt +#include <linux/clk.h> #include <linux/cpu_pm.h> -#include <linux/kernel.h> +#include <linux/delay.h> #include <linux/init.h> -#include <linux/of_address.h> #include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mbus.h> +#include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/platform_device.h> -#include <linux/smp.h> +#include <linux/pm_opp.h> #include <linux/resource.h> +#include <linux/slab.h> +#include <linux/smp.h> #include <asm/cacheflush.h> #include <asm/cp15.h> +#include <asm/smp_scu.h> #include <asm/smp_plat.h> #include <asm/suspend.h> #include <asm/tlbflush.h> #include "common.h" +#include "armada-370-xp.h" -static void __iomem *pmsu_mp_base; #define PMSU_BASE_OFFSET 0x100 #define PMSU_REG_SIZE 0x1000 @@ -57,20 +64,45 @@ static void __iomem *pmsu_mp_base; #define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24) #define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25) +#define PMSU_EVENT_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x120) +#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE BIT(1) +#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK BIT(17) + #define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124) /* PMSU fabric registers */ #define L2C_NFABRIC_PM_CTL 0x4 #define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20) +/* PMSU delay registers */ +#define PMSU_POWERDOWN_DELAY 0xF04 +#define PMSU_POWERDOWN_DELAY_PMU BIT(1) +#define PMSU_POWERDOWN_DELAY_MASK 0xFFFE +#define PMSU_DFLT_ARMADA38X_DELAY 0x64 + +/* CA9 MPcore SoC Control registers */ + +#define MPCORE_RESET_CTL 0x64 +#define MPCORE_RESET_CTL_L2 BIT(0) +#define MPCORE_RESET_CTL_DEBUG BIT(16) + +#define SRAM_PHYS_BASE 0xFFFF0000 +#define BOOTROM_BASE 0xFFF00000 +#define BOOTROM_SIZE 0x100000 + +#define ARMADA_370_CRYPT0_ENG_TARGET 0x9 +#define ARMADA_370_CRYPT0_ENG_ATTR 0x1 + extern void ll_disable_coherency(void); extern void ll_enable_coherency(void); extern void armada_370_xp_cpu_resume(void); +extern void armada_38x_cpu_resume(void); -static struct platform_device armada_xp_cpuidle_device = { - .name = "cpuidle-armada-370-xp", -}; +static phys_addr_t pmsu_mp_phys_base; +static void __iomem *pmsu_mp_base; + +static void *mvebu_cpu_resume; static struct of_device_id of_pmsu_table[] = { { .compatible = "marvell,armada-370-pmsu", }, @@ -85,7 +117,49 @@ void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); } -static int __init armada_370_xp_pmsu_init(void) +extern unsigned char mvebu_boot_wa_start; +extern unsigned char mvebu_boot_wa_end; + +/* + * This function sets up the boot address workaround needed for SMP + * boot on Armada 375 Z1 and cpuidle on Armada 370. It unmaps the + * BootROM Mbus window, and instead remaps a crypto SRAM into which a + * custom piece of code is copied to replace the problematic BootROM. + */ +int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, + unsigned int crypto_eng_attribute, + phys_addr_t resume_addr_reg) +{ + void __iomem *sram_virt_base; + u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start; + + mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute, + SRAM_PHYS_BASE, SZ_64K); + + sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K); + if (!sram_virt_base) { + pr_err("Unable to map SRAM to setup the boot address WA\n"); + return -ENOMEM; + } + + memcpy(sram_virt_base, &mvebu_boot_wa_start, code_len); + + /* + * The last word of the code copied in SRAM must contain the + * physical base address of the PMSU register. We + * intentionally store this address in the native endianness + * of the system. + */ + __raw_writel((unsigned long)resume_addr_reg, + sram_virt_base + code_len - 4); + + iounmap(sram_virt_base); + + return 0; +} + +static int __init mvebu_v7_pmsu_init(void) { struct device_node *np; struct resource res; @@ -116,6 +190,8 @@ static int __init armada_370_xp_pmsu_init(void) goto out; } + pmsu_mp_phys_base = res.start; + pmsu_mp_base = ioremap(res.start, resource_size(&res)); if (!pmsu_mp_base) { pr_err("unable to map registers\n"); @@ -129,7 +205,7 @@ static int __init armada_370_xp_pmsu_init(void) return ret; } -static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) +static void mvebu_v7_pmsu_enable_l2_powerdown_onidle(void) { u32 reg; @@ -142,14 +218,20 @@ static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); } +enum pmsu_idle_prepare_flags { + PMSU_PREPARE_NORMAL = 0, + PMSU_PREPARE_DEEP_IDLE = BIT(0), + PMSU_PREPARE_SNOOP_DISABLE = BIT(1), +}; + /* No locking is needed because we only access per-CPU registers */ -void armada_370_xp_pmsu_idle_prepare(bool deepidle) +static int mvebu_v7_pmsu_idle_prepare(unsigned long flags) { unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); u32 reg; if (pmsu_mp_base == NULL) - return; + return -EINVAL; /* * Adjust the PMSU configuration to wait for WFI signal, enable @@ -167,22 +249,34 @@ void armada_370_xp_pmsu_idle_prepare(bool deepidle) reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); /* ask HW to power down the L2 Cache if needed */ - if (deepidle) + if (flags & PMSU_PREPARE_DEEP_IDLE) reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN; /* request power down */ reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ; writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); - /* Disable snoop disable by HW - SW is taking care of it */ - reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); - reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP; - writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + if (flags & PMSU_PREPARE_SNOOP_DISABLE) { + /* Disable snoop disable by HW - SW is taking care of it */ + reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP; + writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + } + + return 0; } -static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle) +int armada_370_xp_pmsu_idle_enter(unsigned long deepidle) { - armada_370_xp_pmsu_idle_prepare(deepidle); + unsigned long flags = PMSU_PREPARE_SNOOP_DISABLE; + int ret; + + if (deepidle) + flags |= PMSU_PREPARE_DEEP_IDLE; + + ret = mvebu_v7_pmsu_idle_prepare(flags); + if (ret) + return ret; v7_exit_coherency_flush(all); @@ -208,25 +302,50 @@ static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle) "isb " : : : "r0"); - pr_warn("Failed to suspend the system\n"); + pr_debug("Failed to suspend the system\n"); return 0; } static int armada_370_xp_cpu_suspend(unsigned long deepidle) { - return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend); + return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter); +} + +static int armada_38x_do_cpu_suspend(unsigned long deepidle) +{ + unsigned long flags = 0; + + if (deepidle) + flags |= PMSU_PREPARE_DEEP_IDLE; + + mvebu_v7_pmsu_idle_prepare(flags); + /* + * Already flushed cache, but do it again as the outer cache + * functions dirty the cache with spinlocks + */ + v7_exit_coherency_flush(louis); + + scu_power_mode(mvebu_get_scu_base(), SCU_PM_POWEROFF); + + cpu_do_idle(); + + return 1; +} + +static int armada_38x_cpu_suspend(unsigned long deepidle) +{ + return cpu_suspend(false, armada_38x_do_cpu_suspend); } /* No locking is needed because we only access per-CPU registers */ -static noinline void armada_370_xp_pmsu_idle_restore(void) +void mvebu_v7_pmsu_idle_exit(void) { unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); u32 reg; if (pmsu_mp_base == NULL) return; - /* cancel ask HW to power down the L2 Cache if possible */ reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN; @@ -241,53 +360,292 @@ static noinline void armada_370_xp_pmsu_idle_restore(void) writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); } -static int armada_370_xp_cpu_pm_notify(struct notifier_block *self, +static int mvebu_v7_cpu_pm_notify(struct notifier_block *self, unsigned long action, void *hcpu) { if (action == CPU_PM_ENTER) { unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); - mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cpu_resume); } else if (action == CPU_PM_EXIT) { - armada_370_xp_pmsu_idle_restore(); + mvebu_v7_pmsu_idle_exit(); } return NOTIFY_OK; } -static struct notifier_block armada_370_xp_cpu_pm_notifier = { - .notifier_call = armada_370_xp_cpu_pm_notify, +static struct notifier_block mvebu_v7_cpu_pm_notifier = { + .notifier_call = mvebu_v7_cpu_pm_notify, }; -int __init armada_370_xp_cpu_pm_init(void) +static struct platform_device mvebu_v7_cpuidle_device; + +static __init int armada_370_cpuidle_init(void) { struct device_node *np; + phys_addr_t redirect_reg; + + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (!np) + return -ENODEV; + of_node_put(np); /* - * Check that all the requirements are available to enable - * cpuidle. So far, it is only supported on Armada XP, cpuidle - * needs the coherency fabric and the PMSU enabled + * On Armada 370, there is "a slow exit process from the deep + * idle state due to heavy L1/L2 cache cleanup operations + * performed by the BootROM software". To avoid this, we + * replace the restart code of the bootrom by a a simple jump + * to the boot address. Then the code located at this boot + * address will take care of the initialization. */ + redirect_reg = pmsu_mp_phys_base + PMSU_BOOT_ADDR_REDIRECT_OFFSET(0); + mvebu_setup_boot_addr_wa(ARMADA_370_CRYPT0_ENG_TARGET, + ARMADA_370_CRYPT0_ENG_ATTR, + redirect_reg); - if (!of_machine_is_compatible("marvell,armadaxp")) - return 0; + mvebu_cpu_resume = armada_370_xp_cpu_resume; + mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; + mvebu_v7_cpuidle_device.name = "cpuidle-armada-370"; + + return 0; +} + +static __init int armada_38x_cpuidle_init(void) +{ + struct device_node *np; + void __iomem *mpsoc_base; + u32 reg; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-380-coherency-fabric"); + if (!np) + return -ENODEV; + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-380-mpcore-soc-ctrl"); + if (!np) + return -ENODEV; + mpsoc_base = of_iomap(np, 0); + BUG_ON(!mpsoc_base); + of_node_put(np); + + /* Set up reset mask when powering down the cpus */ + reg = readl(mpsoc_base + MPCORE_RESET_CTL); + reg |= MPCORE_RESET_CTL_L2; + reg |= MPCORE_RESET_CTL_DEBUG; + writel(reg, mpsoc_base + MPCORE_RESET_CTL); + iounmap(mpsoc_base); + + /* Set up delay */ + reg = readl(pmsu_mp_base + PMSU_POWERDOWN_DELAY); + reg &= ~PMSU_POWERDOWN_DELAY_MASK; + reg |= PMSU_DFLT_ARMADA38X_DELAY; + reg |= PMSU_POWERDOWN_DELAY_PMU; + writel(reg, pmsu_mp_base + PMSU_POWERDOWN_DELAY); + + mvebu_cpu_resume = armada_38x_cpu_resume; + mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend; + mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x"; + + return 0; +} + +static __init int armada_xp_cpuidle_init(void) +{ + struct device_node *np; np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); if (!np) - return 0; + return -ENODEV; of_node_put(np); + mvebu_cpu_resume = armada_370_xp_cpu_resume; + mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; + mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp"; + + return 0; +} + +static int __init mvebu_v7_cpu_pm_init(void) +{ + struct device_node *np; + int ret; + np = of_find_matching_node(NULL, of_pmsu_table); if (!np) return 0; of_node_put(np); - armada_370_xp_pmsu_enable_l2_powerdown_onidle(); - armada_xp_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; - platform_device_register(&armada_xp_cpuidle_device); - cpu_pm_register_notifier(&armada_370_xp_cpu_pm_notifier); + if (of_machine_is_compatible("marvell,armadaxp")) + ret = armada_xp_cpuidle_init(); + else if (of_machine_is_compatible("marvell,armada370")) + ret = armada_370_cpuidle_init(); + else if (of_machine_is_compatible("marvell,armada380")) + ret = armada_38x_cpuidle_init(); + else + return 0; + + if (ret) + return ret; + + mvebu_v7_pmsu_enable_l2_powerdown_onidle(); + platform_device_register(&mvebu_v7_cpuidle_device); + cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier); + + return 0; +} + +arch_initcall(mvebu_v7_cpu_pm_init); +early_initcall(mvebu_v7_pmsu_init); + +static void mvebu_pmsu_dfs_request_local(void *data) +{ + u32 reg; + u32 cpu = smp_processor_id(); + unsigned long flags; + + local_irq_save(flags); + + /* Prepare to enter idle */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu)); + reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT | + PMSU_STATUS_AND_MASK_IRQ_MASK | + PMSU_STATUS_AND_MASK_FIQ_MASK; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu)); + + /* Request the DFS transition */ + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu)); + reg |= PMSU_CONTROL_AND_CONFIG_DFS_REQ; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu)); + + /* The fact of entering idle will trigger the DFS transition */ + wfi(); + + /* + * We're back from idle, the DFS transition has completed, + * clear the idle wait indication. + */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu)); + reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu)); + + local_irq_restore(flags); +} + +int mvebu_pmsu_dfs_request(int cpu) +{ + unsigned long timeout; + int hwcpu = cpu_logical_map(cpu); + u32 reg; + + /* Clear any previous DFS DONE event */ + reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE; + writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + + /* Mask the DFS done interrupt, since we are going to poll */ + reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + reg |= PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK; + writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + + /* Trigger the DFS on the appropriate CPU */ + smp_call_function_single(cpu, mvebu_pmsu_dfs_request_local, + NULL, false); + + /* Poll until the DFS done event is generated */ + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) { + reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + if (reg & PMSU_EVENT_STATUS_AND_MASK_DFS_DONE) + break; + udelay(10); + } + + if (time_after(jiffies, timeout)) + return -ETIME; + + /* Restore the DFS mask to its original state */ + reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK; + writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + + return 0; +} + +static int __init armada_xp_pmsu_cpufreq_init(void) +{ + struct device_node *np; + struct resource res; + int ret, cpu; + + if (!of_machine_is_compatible("marvell,armadaxp")) + return 0; + + /* + * In order to have proper cpufreq handling, we need to ensure + * that the Device Tree description of the CPU clock includes + * the definition of the PMU DFS registers. If not, we do not + * register the clock notifier and the cpufreq driver. This + * piece of code is only for compatibility with old Device + * Trees. + */ + np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock"); + if (!np) + return 0; + + ret = of_address_to_resource(np, 1, &res); + if (ret) { + pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n"); + of_node_put(np); + return 0; + } + + of_node_put(np); + + /* + * For each CPU, this loop registers the operating points + * supported (which are the nominal CPU frequency and half of + * it), and registers the clock notifier that will take care + * of doing the PMSU part of a frequency transition. + */ + for_each_possible_cpu(cpu) { + struct device *cpu_dev; + struct clk *clk; + int ret; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("Cannot get CPU %d\n", cpu); + continue; + } + + clk = clk_get(cpu_dev, 0); + if (IS_ERR(clk)) { + pr_err("Cannot get clock for CPU %d\n", cpu); + return PTR_ERR(clk); + } + + /* + * In case of a failure of dev_pm_opp_add(), we don't + * bother with cleaning up the registered OPP (there's + * no function to do so), and simply cancel the + * registration of the cpufreq device. + */ + ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0); + if (ret) { + clk_put(clk); + return ret; + } + + ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0); + if (ret) { + clk_put(clk); + return ret; + } + } + platform_device_register_simple("cpufreq-generic", -1, NULL, 0); return 0; } -arch_initcall(armada_370_xp_cpu_pm_init); -early_initcall(armada_370_xp_pmsu_init); +device_initcall(armada_xp_pmsu_cpufreq_init); diff --git a/arch/arm/mach-mvebu/pmsu.h b/arch/arm/mach-mvebu/pmsu.h index 07a737c6b95d..6b58c1fe2b0d 100644 --- a/arch/arm/mach-mvebu/pmsu.h +++ b/arch/arm/mach-mvebu/pmsu.h @@ -12,5 +12,10 @@ #define __MACH_MVEBU_PMSU_H int armada_xp_boot_cpu(unsigned int cpu_id, void *phys_addr); +int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, + unsigned int crypto_eng_attribute, + phys_addr_t resume_addr_reg); + +void mvebu_v7_pmsu_idle_exit(void); #endif /* __MACH_370_XP_PMSU_H */ diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S index fc3de68d8c54..a945756cfb45 100644 --- a/arch/arm/mach-mvebu/pmsu_ll.S +++ b/arch/arm/mach-mvebu/pmsu_ll.S @@ -23,3 +23,39 @@ ARM_BE8(setend be ) @ go BE8 if entered LE b cpu_resume ENDPROC(armada_370_xp_cpu_resume) +ENTRY(armada_38x_cpu_resume) + /* do we need it for Armada 38x*/ +ARM_BE8(setend be ) @ go BE8 if entered LE + bl v7_invalidate_l1 + mrc p15, 4, r1, c15, c0 @ get SCU base address + orr r1, r1, #0x8 @ SCU CPU Power Status Register + mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID + and r0, r0, #15 + add r1, r1, r0 + mov r0, #0x0 + strb r0, [r1] @ switch SCU power state to Normal mode + b cpu_resume +ENDPROC(armada_38x_cpu_resume) + +.global mvebu_boot_wa_start +.global mvebu_boot_wa_end + +/* The following code will be executed from SRAM */ +ENTRY(mvebu_boot_wa_start) +mvebu_boot_wa_start: +ARM_BE8(setend be) + adr r0, 1f + ldr r0, [r0] @ load the address of the + @ resume register + ldr r0, [r0] @ load the value in the + @ resume register +ARM_BE8(rev r0, r0) @ the value is stored LE + mov pc, r0 @ jump to this value +/* + * the last word of this piece of code will be filled by the physical + * address of the boot address register just after being copied in SRAM + */ +1: + .long . +mvebu_boot_wa_end: +ENDPROC(mvebu_boot_wa_end) diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index 0c5524ac75b7..a068cb5c2ce8 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -28,8 +28,14 @@ #include <linux/io.h> #include <linux/reboot.h> #include "common.h" +#include "mvebu-soc-id.h" +#include "pmsu.h" + +#define ARMADA_375_CRYPT0_ENG_TARGET 41 +#define ARMADA_375_CRYPT0_ENG_ATTR 1 static void __iomem *system_controller_base; +static phys_addr_t system_controller_phys_base; struct mvebu_system_controller { u32 rstoutn_mask_offset; @@ -39,6 +45,9 @@ struct mvebu_system_controller { u32 system_soft_reset; u32 resume_boot_addr; + + u32 dev_id; + u32 rev_id; }; static struct mvebu_system_controller *mvebu_sc; @@ -47,6 +56,8 @@ static const struct mvebu_system_controller armada_370_xp_system_controller = { .system_soft_reset_offset = 0x64, .rstoutn_mask_reset_out_en = 0x1, .system_soft_reset = 0x1, + .dev_id = 0x38, + .rev_id = 0x3c, }; static const struct mvebu_system_controller armada_375_system_controller = { @@ -55,6 +66,8 @@ static const struct mvebu_system_controller armada_375_system_controller = { .rstoutn_mask_reset_out_en = 0x1, .system_soft_reset = 0x1, .resume_boot_addr = 0xd4, + .dev_id = 0x38, + .rev_id = 0x3c, }; static const struct mvebu_system_controller orion_system_controller = { @@ -101,11 +114,45 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd) ; } +int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev) +{ + if (of_machine_is_compatible("marvell,armada380") && + system_controller_base) { + *dev = readl(system_controller_base + mvebu_sc->dev_id) >> 16; + *rev = (readl(system_controller_base + mvebu_sc->rev_id) >> 8) + & 0xF; + return 0; + } else + return -ENODEV; +} + #ifdef CONFIG_SMP +void mvebu_armada375_smp_wa_init(void) +{ + u32 dev, rev; + phys_addr_t resume_addr_reg; + + if (mvebu_get_soc_id(&dev, &rev) != 0) + return; + + if (rev != ARMADA_375_Z1_REV) + return; + + resume_addr_reg = system_controller_phys_base + + mvebu_sc->resume_boot_addr; + mvebu_setup_boot_addr_wa(ARMADA_375_CRYPT0_ENG_TARGET, + ARMADA_375_CRYPT0_ENG_ATTR, + resume_addr_reg); +} + void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr) { BUG_ON(system_controller_base == NULL); BUG_ON(mvebu_sc->resume_boot_addr == 0); + + if (of_machine_is_compatible("marvell,armada375")) + mvebu_armada375_smp_wa_init(); + writel(virt_to_phys(boot_addr), system_controller_base + mvebu_sc->resume_boot_addr); } @@ -119,7 +166,10 @@ static int __init mvebu_system_controller_init(void) np = of_find_matching_node_and_match(NULL, of_system_controller_table, &match); if (np) { + struct resource res; system_controller_base = of_iomap(np, 0); + of_address_to_resource(np, 0, &res); + system_controller_phys_base = res.start; mvebu_sc = (struct mvebu_system_controller *)match->data; of_node_put(np); } diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 3c2530523111..058a4f7d44c5 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -6,11 +6,6 @@ #define __ASM_ARCH_MEMORY_H /* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x10000000) - -/* * Bus address is physical address, except for OMAP-1510 Local Bus. * OMAP-1510 bus address is translated into a Local Bus address if the * OMAP bus type is lbus. We do the address translation based on the diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c index 238170cab5b7..44a3d19eb481 100644 --- a/arch/arm/mach-omap1/ocpi.c +++ b/arch/arm/mach-omap1/ocpi.c @@ -55,7 +55,6 @@ static struct clk *ocpi_ck; /* * Enables device access to OMAP buses via the OCPI bridge - * FIXME: Add locking */ int ocpi_enable(void) { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1c1ed737f7ab..e7189dcc9309 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -15,7 +15,6 @@ config ARCH_OMAP3 bool "TI OMAP3" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM select OMAP_INTERCONNECT select PM_OPP if PM diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 06bbadc63a65..69bbcba8842f 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -200,6 +200,7 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o # hwmod data +obj-y += omap_hwmod_common_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o @@ -230,10 +231,6 @@ obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) -ifneq ($(CONFIG_TIDSPBRIDGE),) -obj-y += dsp.o -endif - # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 67fd26a18441..b2ff6cd7ca9f 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -21,10 +21,7 @@ #include <asm/div64.h> -#include "soc.h" #include "clock.h" -#include "cm-regbits-24xx.h" -#include "cm-regbits-34xx.h" /* DPLL rate rounding: minimum DPLL multiplier, divider values */ #define DPLL_MIN_MULTIPLIER 2 @@ -44,20 +41,12 @@ #define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE)) -/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ -#define OMAP3430_DPLL_FINT_BAND1_MIN 750000 -#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000 -#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000 -#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000 - /* * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx. * From device data manual section 4.3 "DPLL and DLL Specifications". */ #define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000 #define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000 -#define OMAP3PLUS_DPLL_FINT_MIN 32000 -#define OMAP3PLUS_DPLL_FINT_MAX 52000000 /* _dpll_test_fint() return codes */ #define DPLL_FINT_UNDERFLOW -1 @@ -87,33 +76,31 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) /* DPLL divider must result in a valid jitter correction val */ fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n; - if (cpu_is_omap24xx()) { - /* Should not be called for OMAP2, so warn if it is called */ - WARN(1, "No fint limits available for OMAP2!\n"); - return DPLL_FINT_INVALID; - } else if (cpu_is_omap3430()) { - fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; - fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; - } else if (dd->flags & DPLL_J_TYPE) { + if (dd->flags & DPLL_J_TYPE) { fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN; fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX; } else { - fint_min = OMAP3PLUS_DPLL_FINT_MIN; - fint_max = OMAP3PLUS_DPLL_FINT_MAX; + fint_min = ti_clk_features.fint_min; + fint_max = ti_clk_features.fint_max; } - if (fint < fint_min) { + if (!fint_min || !fint_max) { + WARN(1, "No fint limits available!\n"); + return DPLL_FINT_INVALID; + } + + if (fint < ti_clk_features.fint_min) { pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n", n); dd->max_divider = n; ret = DPLL_FINT_UNDERFLOW; - } else if (fint > fint_max) { + } else if (fint > ti_clk_features.fint_max) { pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n", n); dd->min_divider = n; ret = DPLL_FINT_INVALID; - } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX && - fint < OMAP3430_DPLL_FINT_BAND2_MIN) { + } else if (fint > ti_clk_features.fint_band1_max && + fint < ti_clk_features.fint_band2_min) { pr_debug("rejecting n=%d due to Fint failure\n", n); ret = DPLL_FINT_INVALID; } @@ -185,6 +172,34 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate, return r; } +/** + * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not + * @v: bitfield value of the DPLL enable + * + * Checks given DPLL enable bitfield to see whether the DPLL is in bypass + * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise. + */ +static int _omap2_dpll_is_in_bypass(u32 v) +{ + u8 mask, val; + + mask = ti_clk_features.dpll_bypass_vals; + + /* + * Each set bit in the mask corresponds to a bypass value equal + * to the bitshift. Go through each set-bit in the mask and + * compare against the given register value. + */ + while (mask) { + val = __ffs(mask); + mask ^= (1 << val); + if (v == val) + return 1; + } + + return 0; +} + /* Public functions */ u8 omap2_init_dpll_parent(struct clk_hw *hw) { @@ -201,20 +216,9 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw) v >>= __ffs(dd->enable_mask); /* Reparent the struct clk in case the dpll is in bypass */ - if (cpu_is_omap24xx()) { - if (v == OMAP2XXX_EN_DPLL_LPBYPASS || - v == OMAP2XXX_EN_DPLL_FRBYPASS) - return 1; - } else if (cpu_is_omap34xx()) { - if (v == OMAP3XXX_EN_DPLL_LPBYPASS || - v == OMAP3XXX_EN_DPLL_FRBYPASS) - return 1; - } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { - if (v == OMAP4XXX_EN_DPLL_LPBYPASS || - v == OMAP4XXX_EN_DPLL_FRBYPASS || - v == OMAP4XXX_EN_DPLL_MNBYPASS) - return 1; - } + if (_omap2_dpll_is_in_bypass(v)) + return 1; + return 0; } @@ -247,20 +251,8 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk) v &= dd->enable_mask; v >>= __ffs(dd->enable_mask); - if (cpu_is_omap24xx()) { - if (v == OMAP2XXX_EN_DPLL_LPBYPASS || - v == OMAP2XXX_EN_DPLL_FRBYPASS) - return __clk_get_rate(dd->clk_bypass); - } else if (cpu_is_omap34xx()) { - if (v == OMAP3XXX_EN_DPLL_LPBYPASS || - v == OMAP3XXX_EN_DPLL_FRBYPASS) - return __clk_get_rate(dd->clk_bypass); - } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { - if (v == OMAP4XXX_EN_DPLL_LPBYPASS || - v == OMAP4XXX_EN_DPLL_FRBYPASS || - v == OMAP4XXX_EN_DPLL_MNBYPASS) - return __clk_get_rate(dd->clk_bypass); - } + if (_omap2_dpll_is_in_bypass(v)) + return __clk_get_rate(dd->clk_bypass); v = omap2_clk_readl(clk, dd->mult_div1_reg); dpll_mult = v & dd->mult_mask; diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c index 333f0a666171..55eb579aeae1 100644 --- a/arch/arm/mach-omap2/clkt_iclk.c +++ b/arch/arm/mach-omap2/clkt_iclk.c @@ -14,11 +14,11 @@ #include <linux/clk-provider.h> #include <linux/io.h> - #include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-24xx.h" + +/* Register offsets */ +#define CM_AUTOIDLE 0x30 +#define CM_ICLKEN 0x10 /* Private functions */ diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 4ac6e3d2df03..500530d1364a 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -47,6 +47,24 @@ u16 cpu_mask; /* + * Clock features setup. Used instead of CPU type checks. + */ +struct ti_clk_features ti_clk_features; + +/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ +#define OMAP3430_DPLL_FINT_BAND1_MIN 750000 +#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000 +#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000 +#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000 + +/* + * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx. + * From device data manual section 4.3 "DPLL and DLL Specifications". + */ +#define OMAP3PLUS_DPLL_FINT_MIN 32000 +#define OMAP3PLUS_DPLL_FINT_MAX 52000000 + +/* * clkdm_control: if true, then when a clock is enabled in the * hardware, its clockdomain will first be enabled; and when a clock * is disabled in the hardware, its clockdomain will be disabled @@ -266,13 +284,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, * 34xx reverses this, just to keep us on our toes * AM35xx uses both, depending on the module. */ - if (cpu_is_omap24xx()) - *idlest_val = OMAP24XX_CM_IDLEST_VAL; - else if (cpu_is_omap34xx()) - *idlest_val = OMAP34XX_CM_IDLEST_VAL; - else - BUG(); - + *idlest_val = ti_clk_features.cm_idlest_val; } /** @@ -710,3 +722,53 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, (clk_get_rate(core_ck) / 1000000), (clk_get_rate(mpu_ck) / 1000000)); } + +/** + * ti_clk_init_features - init clock features struct for the SoC + * + * Initializes the clock features struct based on the SoC type. + */ +void __init ti_clk_init_features(void) +{ + /* Fint setup for DPLLs */ + if (cpu_is_omap3430()) { + ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; + ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; + ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX; + ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN; + } else { + ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN; + ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX; + } + + /* Bypass value setup for DPLLs */ + if (cpu_is_omap24xx()) { + ti_clk_features.dpll_bypass_vals |= + (1 << OMAP2XXX_EN_DPLL_LPBYPASS) | + (1 << OMAP2XXX_EN_DPLL_FRBYPASS); + } else if (cpu_is_omap34xx()) { + ti_clk_features.dpll_bypass_vals |= + (1 << OMAP3XXX_EN_DPLL_LPBYPASS) | + (1 << OMAP3XXX_EN_DPLL_FRBYPASS); + } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() || + soc_is_omap54xx() || soc_is_dra7xx()) { + ti_clk_features.dpll_bypass_vals |= + (1 << OMAP4XXX_EN_DPLL_LPBYPASS) | + (1 << OMAP4XXX_EN_DPLL_FRBYPASS) | + (1 << OMAP4XXX_EN_DPLL_MNBYPASS); + } + + /* Jitter correction only available on OMAP343X */ + if (cpu_is_omap343x()) + ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL; + + /* Idlest value for interface clocks. + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + * AM35xx uses both, depending on the module. + */ + if (cpu_is_omap24xx()) + ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; + else if (cpu_is_omap34xx()) + ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; +} diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index bb6723842c4a..4592a2762592 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -101,31 +101,6 @@ struct clockdomain; }; \ DEFINE_STRUCT_CLK(_name, _parent_names, _ops); -#define DEFINE_CLK_OMAP_HSDIVIDER(_name, _parent_name, \ - _parent_ptr, _flags, \ - _clksel_reg, _clksel_mask) \ - static const struct clksel _name##_div[] = { \ - { \ - .parent = _parent_ptr, \ - .rates = div31_1to31_rates \ - }, \ - { .parent = NULL }, \ - }; \ - static struct clk _name; \ - static const char *_name##_parent_names[] = { \ - _parent_name, \ - }; \ - static struct clk_hw_omap _name##_hw = { \ - .hw = { \ - .clk = &_name, \ - }, \ - .clksel = _name##_div, \ - .clksel_reg = _clksel_reg, \ - .clksel_mask = _clksel_mask, \ - .ops = &clkhwops_omap4_dpllmx, \ - }; \ - DEFINE_STRUCT_CLK(_name, _name##_parent_names, omap_hsdivider_ops); - /* struct clksel_rate.flags possibilities */ #define RATE_IN_242X (1 << 0) #define RATE_IN_243X (1 << 1) @@ -245,6 +220,23 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg); extern u16 cpu_mask; +/* + * Clock features setup. Used instead of CPU type checks. + */ +struct ti_clk_features { + u32 flags; + long fint_min; + long fint_max; + long fint_band1_max; + long fint_band2_min; + u8 dpll_bypass_vals; + u8 cm_idlest_val; +}; + +#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0) + +extern struct ti_clk_features ti_clk_features; + extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_dummy; extern const struct clkops clkops_omap2_dflt; @@ -283,4 +275,6 @@ extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); extern void omap_clocks_register(struct omap_clk *oclks, int cnt); + +void __init ti_clk_init_features(void); #endif diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h index 9ad7594e7622..e966e3a3c931 100644 --- a/arch/arm/mach-omap2/cm2_7xx.h +++ b/arch/arm/mach-omap2/cm2_7xx.h @@ -357,6 +357,10 @@ #define DRA7XX_CM_L3INIT_SATA_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0088) #define DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET 0x00a0 #define DRA7XX_CM_PCIE_STATICDEP_OFFSET 0x00a4 +#define DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET 0x00b0 +#define DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00b0) +#define DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET 0x00b8 +#define DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00b8) #define DRA7XX_CM_GMAC_CLKSTCTRL_OFFSET 0x00c0 #define DRA7XX_CM_GMAC_STATICDEP_OFFSET 0x00c4 #define DRA7XX_CM_GMAC_DYNAMICDEP_OFFSET 0x00c8 diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 2dabb9ecb986..484cdadfb187 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -14,7 +14,6 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_data/dsp-omap.h> #include "common.h" #include "omap-secure.h" @@ -30,7 +29,6 @@ int __weak omap_secure_ram_reserve_memblock(void) void __init omap_reserve(void) { - omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); omap_barrier_reserve_memblock(); } diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 751f3549bf6f..f4796c002070 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -44,8 +44,7 @@ struct omap3_scratchpad { }; struct omap3_scratchpad_prcm_block { - u32 prm_clksrc_ctrl; - u32 prm_clksel; + u32 prm_contents[2]; u32 cm_contents[11]; u32 prcm_block_size; }; @@ -282,13 +281,9 @@ void omap3_clear_scratchpad_contents(void) void __iomem *v_addr; u32 offset = 0; v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM); - if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & - OMAP3430_GLOBAL_COLD_RST_MASK) { + if (omap3xxx_prm_clear_global_cold_reset()) { for ( ; offset <= max_offset; offset += 0x4) writel_relaxed(0x0, (v_addr + offset)); - omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK, - OMAP3430_GR_MOD, - OMAP3_PRM_RSTST_OFFSET); } } @@ -331,13 +326,7 @@ void omap3_save_scratchpad_contents(void) scratchpad_contents.sdrc_block_offset = 0x64; /* Populate the PRCM block contents */ - prcm_block_contents.prm_clksrc_ctrl = - omap2_prm_read_mod_reg(OMAP3430_GR_MOD, - OMAP3_PRM_CLKSRC_CTRL_OFFSET); - prcm_block_contents.prm_clksel = - omap2_prm_read_mod_reg(OMAP3430_CCR_MOD, - OMAP3_PRM_CLKSEL_OFFSET); - + omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents); omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents); prcm_block_contents.prcm_block_size = 0x0; @@ -575,9 +564,50 @@ int omap3_ctrl_save_padconf(void) * Sets the bootmode for IVA2 to idle. This is needed by the PM code to * force disable IVA2 so that it does not prevent any low-power states. */ -void omap3_ctrl_set_iva_bootmode_idle(void) +static void __init omap3_ctrl_set_iva_bootmode_idle(void) { omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, OMAP343X_CONTROL_IVA2_BOOTMOD); } + +/** + * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle + * + * Sets up the pads controlling the stacked modem in such way that the + * device can enter idle. + */ +static void __init omap3_ctrl_setup_d2d_padconf(void) +{ + u16 mask, padconf; + + /* + * In a stand alone OMAP3430 where there is not a stacked + * modem for the D2D Idle Ack and D2D MStandby must be pulled + * high. S CONTROL_PADCONF_SAD2D_IDLEACK and + * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. + */ + mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); + + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); +} + +/** + * omap3_ctrl_init - does static initializations for control module + * + * Initializes system control module. This sets up the sysconfig autoidle, + * and sets up modem and iva2 so that they can be idled properly. + */ +void __init omap3_ctrl_init(void) +{ + omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG); + + omap3_ctrl_set_iva_bootmode_idle(); + + omap3_ctrl_setup_d2d_padconf(); +} #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index da054801b114..a3c013345c45 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -16,11 +16,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H #define __ARCH_ARM_MACH_OMAP2_CONTROL_H -#include "ctrl_module_core_44xx.h" -#include "ctrl_module_wkup_44xx.h" -#include "ctrl_module_pad_core_44xx.h" -#include "ctrl_module_pad_wkup_44xx.h" - #include "am33xx.h" #ifndef __ASSEMBLY__ @@ -254,6 +249,39 @@ /* TI81XX CONTROL_DEVCONF register offsets */ #define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000) +/* OMAP4 CONTROL MODULE */ +#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000 +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604 +#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218 +#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608 + +/* OMAP4 CONTROL_DSIPHY */ +#define OMAP4_DSI2_LANEENABLE_SHIFT 29 +#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) +#define OMAP4_DSI1_LANEENABLE_SHIFT 24 +#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) +#define OMAP4_DSI1_PIPD_SHIFT 19 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI2_PIPD_SHIFT 14 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) + +/* OMAP4 CONTROL_CAMERA_RX */ +#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24 +#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24) +#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29 +#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29) +#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21 +#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21) +#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19 +#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19) +#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18 +#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18) +#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16 +#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16) + /* OMAP54XX CONTROL STATUS register */ #define OMAP5XXX_CONTROL_STATUS 0x134 #define OMAP5_DEVICETYPE_MASK (0x7 << 6) @@ -427,7 +455,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); -extern void omap3_ctrl_set_iva_bootmode_idle(void); +void omap3_ctrl_init(void); extern void omap2_set_globals_control(void __iomem *ctrl, void __iomem *ctrl_pad); #else diff --git a/arch/arm/mach-omap2/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_core_44xx.h deleted file mode 100644 index 01970824e0e5..000000000000 --- a/arch/arm/mach-omap2/ctrl_module_core_44xx.h +++ /dev/null @@ -1,392 +0,0 @@ -/* - * OMAP44xx CTRL_MODULE_CORE registers and bitfields - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * - * Benoit Cousson (b-cousson@ti.com) - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H -#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H - - -/* Base address */ -#define OMAP4_CTRL_MODULE_CORE 0x4a002000 - -/* Registers offset */ -#define OMAP4_CTRL_MODULE_CORE_IP_REVISION 0x0000 -#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO 0x0004 -#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG 0x0010 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0 0x0200 -#define OMAP4_CTRL_MODULE_CORE_ID_CODE 0x0204 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1 0x0208 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2 0x020c -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3 0x0210 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0 0x0214 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF 0x021c -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP 0x0228 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP 0x0260 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0 0x0264 -#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268 -#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4 -#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300 -#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304 -#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314 -#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318 -#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320 -#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL 0x0324 -#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL 0x0328 -#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR 0x032c -#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0 0x0330 -#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1 0x0334 -#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL 0x033c -#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL 0x0340 -#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL 0x0350 -#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL 0x0400 -#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU 0x0408 -#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0 0x042c -#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1 0x0430 -#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2 0x0434 -#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3 0x0438 -#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0 0x0440 -#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1 0x0444 -#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2 0x0448 -#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL 0x044c -#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL 0x0450 -#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL 0x0454 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0 0x0480 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1 0x0484 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2 0x0488 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3 0x048c -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4 0x0490 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5 0x0494 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6 0x0498 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7 0x049c -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8 0x04a0 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9 0x04a4 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10 0x04a8 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11 0x04ac -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12 0x04b0 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13 0x04b4 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14 0x04b8 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15 0x04bc -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16 0x04c0 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17 0x04c4 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18 0x04c8 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19 0x04cc -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20 0x04d0 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21 0x04d4 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22 0x04d8 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23 0x04dc -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24 0x04e0 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25 0x04e4 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26 0x04e8 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27 0x04ec -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28 0x04f0 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29 0x04f4 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30 0x04f8 -#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31 0x04fc - -/* Registers shifts and masks */ - -/* IP_REVISION */ -#define OMAP4_IP_REV_SCHEME_SHIFT 30 -#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30) -#define OMAP4_IP_REV_FUNC_SHIFT 16 -#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16) -#define OMAP4_IP_REV_RTL_SHIFT 11 -#define OMAP4_IP_REV_RTL_MASK (0x1f << 11) -#define OMAP4_IP_REV_MAJOR_SHIFT 8 -#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8) -#define OMAP4_IP_REV_CUSTOM_SHIFT 6 -#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6) -#define OMAP4_IP_REV_MINOR_SHIFT 0 -#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0) - -/* IP_HWINFO */ -#define OMAP4_IP_HWINFO_SHIFT 0 -#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0) - -/* IP_SYSCONFIG */ -#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2 -#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2) - -/* STD_FUSE_DIE_ID_0 */ -#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT 0 -#define OMAP4_STD_FUSE_DIE_ID_0_MASK (0xffffffff << 0) - -/* ID_CODE */ -#define OMAP4_STD_FUSE_IDCODE_SHIFT 0 -#define OMAP4_STD_FUSE_IDCODE_MASK (0xffffffff << 0) - -/* STD_FUSE_DIE_ID_1 */ -#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT 0 -#define OMAP4_STD_FUSE_DIE_ID_1_MASK (0xffffffff << 0) - -/* STD_FUSE_DIE_ID_2 */ -#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT 0 -#define OMAP4_STD_FUSE_DIE_ID_2_MASK (0xffffffff << 0) - -/* STD_FUSE_DIE_ID_3 */ -#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT 0 -#define OMAP4_STD_FUSE_DIE_ID_3_MASK (0xffffffff << 0) - -/* STD_FUSE_PROD_ID_0 */ -#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT 0 -#define OMAP4_STD_FUSE_PROD_ID_0_MASK (0xffffffff << 0) - -/* STD_FUSE_PROD_ID_1 */ -#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT 0 -#define OMAP4_STD_FUSE_PROD_ID_1_MASK (0xffffffff << 0) - -/* STD_FUSE_USB_CONF */ -#define OMAP4_USB_PROD_ID_SHIFT 16 -#define OMAP4_USB_PROD_ID_MASK (0xffff << 16) -#define OMAP4_USB_VENDOR_ID_SHIFT 0 -#define OMAP4_USB_VENDOR_ID_MASK (0xffff << 0) - -/* STD_FUSE_OPP_VDD_WKUP */ -#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT 0 -#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK (0xffffffff << 0) - -/* STD_FUSE_OPP_BGAP */ -#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT 0 -#define OMAP4_STD_FUSE_OPP_BGAP_MASK (0xffffffff << 0) - -/* STD_FUSE_OPP_DPLL_0 */ -#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT 0 -#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK (0xffffffff << 0) - -/* STD_FUSE_OPP_DPLL_1 */ -#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT 0 -#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK (0xffffffff << 0) - -/* STATUS */ -#define OMAP4_ATTILA_CONF_SHIFT 11 -#define OMAP4_ATTILA_CONF_MASK (0x3 << 11) -#define OMAP4_DEVICE_TYPE_SHIFT 8 -#define OMAP4_DEVICE_TYPE_MASK (0x7 << 8) -#define OMAP4_SYS_BOOT_SHIFT 0 -#define OMAP4_SYS_BOOT_MASK (0xff << 0) - -/* DEV_CONF */ -#define OMAP4_DEV_CONF_SHIFT 1 -#define OMAP4_DEV_CONF_MASK (0x7fffffff << 1) -#define OMAP4_USBPHY_PD_SHIFT 0 -#define OMAP4_USBPHY_PD_MASK (1 << 0) - -/* LDOVBB_IVA_VOLTAGE_CTRL */ -#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT 26 -#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK (1 << 26) -#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT 21 -#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK (0x1f << 21) -#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT 16 -#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK (0x1f << 16) -#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT 10 -#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK (1 << 10) -#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT 5 -#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK (0x1f << 5) -#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT 0 -#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK (0x1f << 0) - -/* LDOVBB_MPU_VOLTAGE_CTRL */ -#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT 26 -#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK (1 << 26) -#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT 21 -#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK (0x1f << 21) -#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT 16 -#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK (0x1f << 16) -#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT 10 -#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK (1 << 10) -#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT 5 -#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK (0x1f << 5) -#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT 0 -#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK (0x1f << 0) - -/* LDOSRAM_IVA_VOLTAGE_CTRL */ -#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT 26 -#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK (1 << 26) -#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT 21 -#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK (0x1f << 21) -#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT 16 -#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK (0x1f << 16) -#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT 10 -#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK (1 << 10) -#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT 5 -#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK (0x1f << 5) -#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT 0 -#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK (0x1f << 0) - -/* LDOSRAM_MPU_VOLTAGE_CTRL */ -#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT 26 -#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK (1 << 26) -#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT 21 -#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK (0x1f << 21) -#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT 16 -#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK (0x1f << 16) -#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT 10 -#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK (1 << 10) -#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT 5 -#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK (0x1f << 5) -#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT 0 -#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK (0x1f << 0) - -/* LDOSRAM_CORE_VOLTAGE_CTRL */ -#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT 26 -#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK (1 << 26) -#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT 21 -#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK (0x1f << 21) -#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT 16 -#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK (0x1f << 16) -#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT 10 -#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK (1 << 10) -#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT 5 -#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK (0x1f << 5) -#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT 0 -#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK (0x1f << 0) - -/* TEMP_SENSOR */ -#define OMAP4_BGAP_TEMPSOFF_SHIFT 12 -#define OMAP4_BGAP_TEMPSOFF_MASK (1 << 12) -#define OMAP4_BGAP_TSHUT_SHIFT 11 -#define OMAP4_BGAP_TSHUT_MASK (1 << 11) -#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10 -#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10) -#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT 9 -#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9) -#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8 -#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8) -#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0 -#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0) - -/* DPLL_NWELL_TRIM_0 */ -#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT 29 -#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK (1 << 29) -#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT 24 -#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK (0x1f << 24) -#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT 23 -#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK (1 << 23) -#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT 18 -#define OMAP4_DPLL_PER_NWELL_TRIM_MASK (0x1f << 18) -#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT 17 -#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK (1 << 17) -#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT 12 -#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK (0x1f << 12) -#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT 11 -#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK (1 << 11) -#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT 6 -#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK (0x1f << 6) -#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT 5 -#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK (1 << 5) -#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT 0 -#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK (0x1f << 0) - -/* DPLL_NWELL_TRIM_1 */ -#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT 29 -#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK (1 << 29) -#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT 24 -#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK (0x1f << 24) -#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT 23 -#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK (1 << 23) -#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT 18 -#define OMAP4_DPLL_USB_NWELL_TRIM_MASK (0x1f << 18) -#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT 17 -#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK (1 << 17) -#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT 12 -#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK (0x1f << 12) -#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT 11 -#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK (1 << 11) -#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT 6 -#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK (0x1f << 6) -#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT 5 -#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK (1 << 5) -#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT 0 -#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK (0x1f << 0) - -/* USBOTGHS_CONTROL */ -#define OMAP4_DISCHRGVBUS_SHIFT 8 -#define OMAP4_DISCHRGVBUS_MASK (1 << 8) -#define OMAP4_CHRGVBUS_SHIFT 7 -#define OMAP4_CHRGVBUS_MASK (1 << 7) -#define OMAP4_DRVVBUS_SHIFT 6 -#define OMAP4_DRVVBUS_MASK (1 << 6) -#define OMAP4_IDPULLUP_SHIFT 5 -#define OMAP4_IDPULLUP_MASK (1 << 5) -#define OMAP4_IDDIG_SHIFT 4 -#define OMAP4_IDDIG_MASK (1 << 4) -#define OMAP4_SESSEND_SHIFT 3 -#define OMAP4_SESSEND_MASK (1 << 3) -#define OMAP4_VBUSVALID_SHIFT 2 -#define OMAP4_VBUSVALID_MASK (1 << 2) -#define OMAP4_BVALID_SHIFT 1 -#define OMAP4_BVALID_MASK (1 << 1) -#define OMAP4_AVALID_SHIFT 0 -#define OMAP4_AVALID_MASK (1 << 0) - -/* DSS_CONTROL */ -#define OMAP4_DSS_MUX6_SELECT_SHIFT 0 -#define OMAP4_DSS_MUX6_SELECT_MASK (1 << 0) - -/* HWOBS_CONTROL */ -#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT 3 -#define OMAP4_HWOBS_CLKDIV_SEL_MASK (0x1f << 3) -#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT 2 -#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK (1 << 2) -#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT 1 -#define OMAP4_HWOBS_ALL_ONE_MODE_MASK (1 << 1) -#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT 0 -#define OMAP4_HWOBS_MACRO_ENABLE_MASK (1 << 0) - -/* DEBOBS_FINAL_MUX_SEL */ -#define OMAP4_SELECT_SHIFT 0 -#define OMAP4_SELECT_MASK (0xffffffff << 0) - -/* DEBOBS_MMR_MPU */ -#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT 0 -#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK (0xf << 0) - -/* CONF_SDMA_REQ_SEL0 */ -#define OMAP4_MULT_SHIFT 0 -#define OMAP4_MULT_MASK (0x7f << 0) - -/* CONF_CLK_SEL0 */ -#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT 0 -#define OMAP4_MULT_CONF_CLK_SEL0_MASK (0x7 << 0) - -/* CONF_CLK_SEL1 */ -#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT 0 -#define OMAP4_MULT_CONF_CLK_SEL1_MASK (0x7 << 0) - -/* CONF_CLK_SEL2 */ -#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT 0 -#define OMAP4_MULT_CONF_CLK_SEL2_MASK (0x7 << 0) - -/* CONF_DPLL_FREQLOCK_SEL */ -#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT 0 -#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK (0x7 << 0) - -/* CONF_DPLL_TINITZ_SEL */ -#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT 0 -#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK (0x7 << 0) - -/* CONF_DPLL_PHASELOCK_SEL */ -#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT 0 -#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK (0x7 << 0) - -/* CONF_DEBUG_SEL_TST_0 */ -#define OMAP4_MODE_SHIFT 0 -#define OMAP4_MODE_MASK (0xf << 0) - -#endif diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h deleted file mode 100644 index c88420de1151..000000000000 --- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h +++ /dev/null @@ -1,1409 +0,0 @@ -/* - * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * - * Benoit Cousson (b-cousson@ti.com) - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H -#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H - - -/* Base address */ -#define OMAP4_CTRL_MODULE_PAD_CORE 0x4a100000 - -/* Registers offset */ -#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION 0x0000 -#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO 0x0004 -#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG 0x0010 -#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0 0x01d8 -#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1 0x01dc -#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2 0x01e0 -#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3 0x01e4 -#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4 0x01e8 -#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5 0x01ec -#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6 0x01f0 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL 0x05a0 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE 0x05a4 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0 0x05a8 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1 0x05ac -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0 0x05b0 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1 0x05b4 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0 0x05b8 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1 0x05bc -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC 0x060c -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY 0x0610 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2 0x0614 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE 0x0620 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI 0x062c -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB 0x0630 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ 0x0634 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0 0x0638 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1 0x063c -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2 0x0640 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3 0x0644 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0 0x0648 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1 0x064c -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2 0x0650 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3 0x0654 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD 0x0658 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C 0x065c -#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW 0x0660 -#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R 0x0664 -#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0 0x0668 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1 0x0700 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2 0x0704 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3 0x0708 -#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4 0x070c - -/* Registers shifts and masks */ - -/* IP_REVISION */ -#define OMAP4_IP_REV_SCHEME_SHIFT 30 -#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30) -#define OMAP4_IP_REV_FUNC_SHIFT 16 -#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16) -#define OMAP4_IP_REV_RTL_SHIFT 11 -#define OMAP4_IP_REV_RTL_MASK (0x1f << 11) -#define OMAP4_IP_REV_MAJOR_SHIFT 8 -#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8) -#define OMAP4_IP_REV_CUSTOM_SHIFT 6 -#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6) -#define OMAP4_IP_REV_MINOR_SHIFT 0 -#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0) - -/* IP_HWINFO */ -#define OMAP4_IP_HWINFO_SHIFT 0 -#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0) - -/* IP_SYSCONFIG */ -#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2 -#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2) - -/* PADCONF_WAKEUPEVENT_0 */ -#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT 31 -#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 31) -#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT 30 -#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK (1 << 30) -#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT 29 -#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK (1 << 29) -#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT 28 -#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK (1 << 28) -#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT 27 -#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK (1 << 27) -#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT 26 -#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK (1 << 26) -#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT 25 -#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK (1 << 25) -#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT 24 -#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK (1 << 24) -#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT 23 -#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK (1 << 23) -#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT 22 -#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK (1 << 22) -#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT 21 -#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK (1 << 21) -#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT 20 -#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK (1 << 20) -#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT 19 -#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK (1 << 19) -#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT 18 -#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK (1 << 18) -#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT 17 -#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK (1 << 17) -#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT 16 -#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK (1 << 16) -#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT 15 -#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK (1 << 15) -#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT 14 -#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK (1 << 14) -#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT 13 -#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK (1 << 13) -#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT 12 -#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK (1 << 12) -#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT 11 -#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK (1 << 11) -#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT 10 -#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK (1 << 10) -#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT 9 -#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK (1 << 9) -#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT 8 -#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK (1 << 8) -#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT 7 -#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK (1 << 7) -#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT 6 -#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK (1 << 6) -#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT 5 -#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK (1 << 5) -#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT 4 -#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK (1 << 4) -#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT 3 -#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK (1 << 3) -#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT 2 -#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK (1 << 2) -#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT 1 -#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK (1 << 1) -#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT 0 -#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK (1 << 0) - -/* PADCONF_WAKEUPEVENT_1 */ -#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 31 -#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 31) -#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT 30 -#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK (1 << 30) -#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT 29 -#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 29) -#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT 28 -#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 28) -#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT 27 -#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 27) -#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT 26 -#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 26) -#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT 25 -#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK (1 << 25) -#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT 24 -#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK (1 << 24) -#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT 23 -#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK (1 << 23) -#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT 22 -#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK (1 << 22) -#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT 21 -#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK (1 << 21) -#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT 20 -#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK (1 << 20) -#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT 19 -#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 19) -#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT 18 -#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 18) -#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT 17 -#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 17) -#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT 16 -#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 16) -#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT 15 -#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 15) -#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT 14 -#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 14) -#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT 13 -#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK (1 << 13) -#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT 12 -#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK (1 << 12) -#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT 11 -#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK (1 << 11) -#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT 10 -#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK (1 << 10) -#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT 9 -#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK (1 << 9) -#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT 8 -#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK (1 << 8) -#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT 7 -#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK (1 << 7) -#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT 6 -#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6) -#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT 5 -#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5) -#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT 4 -#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK (1 << 4) -#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT 3 -#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK (1 << 3) -#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT 2 -#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK (1 << 2) -#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT 1 -#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK (1 << 1) -#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT 0 -#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK (1 << 0) - -/* PADCONF_WAKEUPEVENT_2 */ -#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 31 -#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 31) -#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT 30 -#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 30) -#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT 29 -#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 29) -#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT 28 -#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 28) -#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 27 -#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 27) -#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 26 -#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 26) -#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 25 -#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 25) -#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 24 -#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 24) -#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 23 -#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 23) -#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 22 -#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 22) -#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 21 -#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 21) -#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 20 -#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 20) -#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 19 -#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 19) -#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT 18 -#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 18) -#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 17 -#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 17) -#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT 16 -#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK (1 << 16) -#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT 15 -#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK (1 << 15) -#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 14 -#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 14) -#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 13 -#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 13) -#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 12 -#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 12) -#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 11 -#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 11) -#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 10 -#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 10) -#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 9 -#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 9) -#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 8 -#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 8) -#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 7 -#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 7) -#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 6 -#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6) -#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 5 -#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5) -#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 4 -#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 4) -#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 3 -#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 3) -#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 2 -#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 2) -#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1 -#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1) -#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT 0 -#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK (1 << 0) - -/* PADCONF_WAKEUPEVENT_3 */ -#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT 31 -#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK (1 << 31) -#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT 30 -#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK (1 << 30) -#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT 29 -#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK (1 << 29) -#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT 28 -#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 28) -#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 27 -#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 27) -#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 26 -#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 26) -#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 25 -#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 25) -#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT 24 -#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 24) -#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT 23 -#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 23) -#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT 22 -#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 22) -#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT 21 -#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 21) -#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT 20 -#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 20) -#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT 19 -#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 19) -#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT 18 -#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 18) -#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT 17 -#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 17) -#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT 16 -#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK (1 << 16) -#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT 15 -#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15) -#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT 14 -#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14) -#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT 13 -#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK (1 << 13) -#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT 12 -#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK (1 << 12) -#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT 11 -#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK (1 << 11) -#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT 10 -#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK (1 << 10) -#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT 9 -#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK (1 << 9) -#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT 8 -#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK (1 << 8) -#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT 7 -#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK (1 << 7) -#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT 6 -#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 6) -#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT 5 -#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK (1 << 5) -#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 4 -#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 4) -#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 3 -#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 3) -#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT 2 -#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 2) -#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT 1 -#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 1) -#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT 0 -#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 0) - -/* PADCONF_WAKEUPEVENT_4 */ -#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT 31 -#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK (1 << 31) -#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT 30 -#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK (1 << 30) -#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 29 -#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 29) -#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 28 -#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 28) -#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 27 -#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 27) -#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 26 -#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 26) -#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 25 -#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 25) -#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 24 -#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 24) -#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 23 -#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 23) -#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 22 -#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 22) -#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 21 -#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 21) -#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 20 -#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 20) -#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 19 -#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 19) -#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 18 -#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 18) -#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 17 -#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 17) -#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 16 -#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 16) -#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT 15 -#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15) -#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT 14 -#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14) -#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT 13 -#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 13) -#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 12 -#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 12) -#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 11 -#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 11) -#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT 10 -#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 10) -#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 9 -#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 9) -#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 8 -#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 8) -#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 7 -#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 7) -#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 6 -#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 6) -#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT 5 -#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 5) -#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT 4 -#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 4) -#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT 3 -#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK (1 << 3) -#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT 2 -#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK (1 << 2) -#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT 1 -#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK (1 << 1) -#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT 0 -#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK (1 << 0) - -/* PADCONF_WAKEUPEVENT_5 */ -#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT 31 -#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK (1 << 31) -#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT 30 -#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK (1 << 30) -#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT 29 -#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK (1 << 29) -#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT 28 -#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK (1 << 28) -#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT 27 -#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK (1 << 27) -#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT 26 -#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK (1 << 26) -#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT 25 -#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK (1 << 25) -#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT 24 -#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK (1 << 24) -#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT 23 -#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK (1 << 23) -#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT 22 -#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK (1 << 22) -#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT 21 -#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK (1 << 21) -#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT 20 -#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK (1 << 20) -#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT 19 -#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK (1 << 19) -#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT 18 -#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK (1 << 18) -#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT 17 -#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK (1 << 17) -#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT 16 -#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK (1 << 16) -#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT 15 -#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK (1 << 15) -#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT 14 -#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK (1 << 14) -#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT 13 -#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK (1 << 13) -#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT 12 -#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK (1 << 12) -#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT 11 -#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 11) -#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10 -#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10) -#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT 9 -#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK (1 << 9) -#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT 8 -#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK (1 << 8) -#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT 7 -#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK (1 << 7) -#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT 6 -#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK (1 << 6) -#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT 5 -#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK (1 << 5) -#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT 4 -#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK (1 << 4) -#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT 3 -#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK (1 << 3) -#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT 2 -#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK (1 << 2) -#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT 1 -#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK (1 << 1) -#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT 0 -#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK (1 << 0) - -/* PADCONF_WAKEUPEVENT_6 */ -#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT 7 -#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK (1 << 7) -#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT 6 -#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK (1 << 6) -#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT 5 -#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK (1 << 5) -#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT 4 -#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK (1 << 4) -#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT 3 -#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK (1 << 3) -#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT 2 -#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK (1 << 2) -#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT 1 -#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK (1 << 1) -#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT 0 -#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK (1 << 0) - -/* CONTROL_PADCONF_GLOBAL */ -#define OMAP4_FORCE_OFFMODE_EN_SHIFT 31 -#define OMAP4_FORCE_OFFMODE_EN_MASK (1 << 31) - -/* CONTROL_PADCONF_MODE */ -#define OMAP4_VDDS_DV_BANK0_SHIFT 31 -#define OMAP4_VDDS_DV_BANK0_MASK (1 << 31) -#define OMAP4_VDDS_DV_BANK1_SHIFT 30 -#define OMAP4_VDDS_DV_BANK1_MASK (1 << 30) -#define OMAP4_VDDS_DV_BANK3_SHIFT 29 -#define OMAP4_VDDS_DV_BANK3_MASK (1 << 29) -#define OMAP4_VDDS_DV_BANK4_SHIFT 28 -#define OMAP4_VDDS_DV_BANK4_MASK (1 << 28) -#define OMAP4_VDDS_DV_BANK5_SHIFT 27 -#define OMAP4_VDDS_DV_BANK5_MASK (1 << 27) -#define OMAP4_VDDS_DV_BANK6_SHIFT 26 -#define OMAP4_VDDS_DV_BANK6_MASK (1 << 26) -#define OMAP4_VDDS_DV_C2C_SHIFT 25 -#define OMAP4_VDDS_DV_C2C_MASK (1 << 25) -#define OMAP4_VDDS_DV_CAM_SHIFT 24 -#define OMAP4_VDDS_DV_CAM_MASK (1 << 24) -#define OMAP4_VDDS_DV_GPMC_SHIFT 23 -#define OMAP4_VDDS_DV_GPMC_MASK (1 << 23) -#define OMAP4_VDDS_DV_SDMMC2_SHIFT 22 -#define OMAP4_VDDS_DV_SDMMC2_MASK (1 << 22) - -/* CONTROL_SMART1IO_PADCONF_0 */ -#define OMAP4_ABE_DR0_SC_SHIFT 30 -#define OMAP4_ABE_DR0_SC_MASK (0x3 << 30) -#define OMAP4_CAM_DR0_SC_SHIFT 28 -#define OMAP4_CAM_DR0_SC_MASK (0x3 << 28) -#define OMAP4_FREF_DR2_SC_SHIFT 26 -#define OMAP4_FREF_DR2_SC_MASK (0x3 << 26) -#define OMAP4_FREF_DR3_SC_SHIFT 24 -#define OMAP4_FREF_DR3_SC_MASK (0x3 << 24) -#define OMAP4_GPIO_DR8_SC_SHIFT 22 -#define OMAP4_GPIO_DR8_SC_MASK (0x3 << 22) -#define OMAP4_GPIO_DR9_SC_SHIFT 20 -#define OMAP4_GPIO_DR9_SC_MASK (0x3 << 20) -#define OMAP4_GPMC_DR2_SC_SHIFT 18 -#define OMAP4_GPMC_DR2_SC_MASK (0x3 << 18) -#define OMAP4_GPMC_DR3_SC_SHIFT 16 -#define OMAP4_GPMC_DR3_SC_MASK (0x3 << 16) -#define OMAP4_GPMC_DR6_SC_SHIFT 14 -#define OMAP4_GPMC_DR6_SC_MASK (0x3 << 14) -#define OMAP4_HDMI_DR0_SC_SHIFT 12 -#define OMAP4_HDMI_DR0_SC_MASK (0x3 << 12) -#define OMAP4_MCSPI1_DR0_SC_SHIFT 10 -#define OMAP4_MCSPI1_DR0_SC_MASK (0x3 << 10) -#define OMAP4_UART1_DR0_SC_SHIFT 8 -#define OMAP4_UART1_DR0_SC_MASK (0x3 << 8) -#define OMAP4_UART3_DR0_SC_SHIFT 6 -#define OMAP4_UART3_DR0_SC_MASK (0x3 << 6) -#define OMAP4_UART3_DR1_SC_SHIFT 4 -#define OMAP4_UART3_DR1_SC_MASK (0x3 << 4) -#define OMAP4_UNIPRO_DR0_SC_SHIFT 2 -#define OMAP4_UNIPRO_DR0_SC_MASK (0x3 << 2) -#define OMAP4_UNIPRO_DR1_SC_SHIFT 0 -#define OMAP4_UNIPRO_DR1_SC_MASK (0x3 << 0) - -/* CONTROL_SMART1IO_PADCONF_1 */ -#define OMAP4_ABE_DR0_LB_SHIFT 30 -#define OMAP4_ABE_DR0_LB_MASK (0x3 << 30) -#define OMAP4_CAM_DR0_LB_SHIFT 28 -#define OMAP4_CAM_DR0_LB_MASK (0x3 << 28) -#define OMAP4_FREF_DR2_LB_SHIFT 26 -#define OMAP4_FREF_DR2_LB_MASK (0x3 << 26) -#define OMAP4_FREF_DR3_LB_SHIFT 24 -#define OMAP4_FREF_DR3_LB_MASK (0x3 << 24) -#define OMAP4_GPIO_DR8_LB_SHIFT 22 -#define OMAP4_GPIO_DR8_LB_MASK (0x3 << 22) -#define OMAP4_GPIO_DR9_LB_SHIFT 20 -#define OMAP4_GPIO_DR9_LB_MASK (0x3 << 20) -#define OMAP4_GPMC_DR2_LB_SHIFT 18 -#define OMAP4_GPMC_DR2_LB_MASK (0x3 << 18) -#define OMAP4_GPMC_DR3_LB_SHIFT 16 -#define OMAP4_GPMC_DR3_LB_MASK (0x3 << 16) -#define OMAP4_GPMC_DR6_LB_SHIFT 14 -#define OMAP4_GPMC_DR6_LB_MASK (0x3 << 14) -#define OMAP4_HDMI_DR0_LB_SHIFT 12 -#define OMAP4_HDMI_DR0_LB_MASK (0x3 << 12) -#define OMAP4_MCSPI1_DR0_LB_SHIFT 10 -#define OMAP4_MCSPI1_DR0_LB_MASK (0x3 << 10) -#define OMAP4_UART1_DR0_LB_SHIFT 8 -#define OMAP4_UART1_DR0_LB_MASK (0x3 << 8) -#define OMAP4_UART3_DR0_LB_SHIFT 6 -#define OMAP4_UART3_DR0_LB_MASK (0x3 << 6) -#define OMAP4_UART3_DR1_LB_SHIFT 4 -#define OMAP4_UART3_DR1_LB_MASK (0x3 << 4) -#define OMAP4_UNIPRO_DR0_LB_SHIFT 2 -#define OMAP4_UNIPRO_DR0_LB_MASK (0x3 << 2) -#define OMAP4_UNIPRO_DR1_LB_SHIFT 0 -#define OMAP4_UNIPRO_DR1_LB_MASK (0x3 << 0) - -/* CONTROL_SMART2IO_PADCONF_0 */ -#define OMAP4_C2C_DR0_LB_SHIFT 31 -#define OMAP4_C2C_DR0_LB_MASK (1 << 31) -#define OMAP4_DPM_DR1_LB_SHIFT 30 -#define OMAP4_DPM_DR1_LB_MASK (1 << 30) -#define OMAP4_DPM_DR2_LB_SHIFT 29 -#define OMAP4_DPM_DR2_LB_MASK (1 << 29) -#define OMAP4_DPM_DR3_LB_SHIFT 28 -#define OMAP4_DPM_DR3_LB_MASK (1 << 28) -#define OMAP4_GPIO_DR0_LB_SHIFT 27 -#define OMAP4_GPIO_DR0_LB_MASK (1 << 27) -#define OMAP4_GPIO_DR1_LB_SHIFT 26 -#define OMAP4_GPIO_DR1_LB_MASK (1 << 26) -#define OMAP4_GPIO_DR10_LB_SHIFT 25 -#define OMAP4_GPIO_DR10_LB_MASK (1 << 25) -#define OMAP4_GPIO_DR2_LB_SHIFT 24 -#define OMAP4_GPIO_DR2_LB_MASK (1 << 24) -#define OMAP4_GPMC_DR0_LB_SHIFT 23 -#define OMAP4_GPMC_DR0_LB_MASK (1 << 23) -#define OMAP4_GPMC_DR1_LB_SHIFT 22 -#define OMAP4_GPMC_DR1_LB_MASK (1 << 22) -#define OMAP4_GPMC_DR4_LB_SHIFT 21 -#define OMAP4_GPMC_DR4_LB_MASK (1 << 21) -#define OMAP4_GPMC_DR5_LB_SHIFT 20 -#define OMAP4_GPMC_DR5_LB_MASK (1 << 20) -#define OMAP4_GPMC_DR7_LB_SHIFT 19 -#define OMAP4_GPMC_DR7_LB_MASK (1 << 19) -#define OMAP4_HSI2_DR0_LB_SHIFT 18 -#define OMAP4_HSI2_DR0_LB_MASK (1 << 18) -#define OMAP4_HSI2_DR1_LB_SHIFT 17 -#define OMAP4_HSI2_DR1_LB_MASK (1 << 17) -#define OMAP4_HSI2_DR2_LB_SHIFT 16 -#define OMAP4_HSI2_DR2_LB_MASK (1 << 16) -#define OMAP4_KPD_DR0_LB_SHIFT 15 -#define OMAP4_KPD_DR0_LB_MASK (1 << 15) -#define OMAP4_KPD_DR1_LB_SHIFT 14 -#define OMAP4_KPD_DR1_LB_MASK (1 << 14) -#define OMAP4_PDM_DR0_LB_SHIFT 13 -#define OMAP4_PDM_DR0_LB_MASK (1 << 13) -#define OMAP4_SDMMC2_DR0_LB_SHIFT 12 -#define OMAP4_SDMMC2_DR0_LB_MASK (1 << 12) -#define OMAP4_SDMMC3_DR0_LB_SHIFT 11 -#define OMAP4_SDMMC3_DR0_LB_MASK (1 << 11) -#define OMAP4_SDMMC4_DR0_LB_SHIFT 10 -#define OMAP4_SDMMC4_DR0_LB_MASK (1 << 10) -#define OMAP4_SDMMC4_DR1_LB_SHIFT 9 -#define OMAP4_SDMMC4_DR1_LB_MASK (1 << 9) -#define OMAP4_SPI3_DR0_LB_SHIFT 8 -#define OMAP4_SPI3_DR0_LB_MASK (1 << 8) -#define OMAP4_SPI3_DR1_LB_SHIFT 7 -#define OMAP4_SPI3_DR1_LB_MASK (1 << 7) -#define OMAP4_UART3_DR2_LB_SHIFT 6 -#define OMAP4_UART3_DR2_LB_MASK (1 << 6) -#define OMAP4_UART3_DR3_LB_SHIFT 5 -#define OMAP4_UART3_DR3_LB_MASK (1 << 5) -#define OMAP4_UART3_DR4_LB_SHIFT 4 -#define OMAP4_UART3_DR4_LB_MASK (1 << 4) -#define OMAP4_UART3_DR5_LB_SHIFT 3 -#define OMAP4_UART3_DR5_LB_MASK (1 << 3) -#define OMAP4_USBA0_DR1_LB_SHIFT 2 -#define OMAP4_USBA0_DR1_LB_MASK (1 << 2) -#define OMAP4_USBA_DR2_LB_SHIFT 1 -#define OMAP4_USBA_DR2_LB_MASK (1 << 1) - -/* CONTROL_SMART2IO_PADCONF_1 */ -#define OMAP4_USBB1_DR0_LB_SHIFT 31 -#define OMAP4_USBB1_DR0_LB_MASK (1 << 31) -#define OMAP4_USBB2_DR0_LB_SHIFT 30 -#define OMAP4_USBB2_DR0_LB_MASK (1 << 30) -#define OMAP4_USBA0_DR0_LB_SHIFT 29 -#define OMAP4_USBA0_DR0_LB_MASK (1 << 29) - -/* CONTROL_SMART3IO_PADCONF_0 */ -#define OMAP4_DMIC_DR0_MB_SHIFT 30 -#define OMAP4_DMIC_DR0_MB_MASK (0x3 << 30) -#define OMAP4_GPIO_DR3_MB_SHIFT 28 -#define OMAP4_GPIO_DR3_MB_MASK (0x3 << 28) -#define OMAP4_GPIO_DR4_MB_SHIFT 26 -#define OMAP4_GPIO_DR4_MB_MASK (0x3 << 26) -#define OMAP4_GPIO_DR5_MB_SHIFT 24 -#define OMAP4_GPIO_DR5_MB_MASK (0x3 << 24) -#define OMAP4_GPIO_DR6_MB_SHIFT 22 -#define OMAP4_GPIO_DR6_MB_MASK (0x3 << 22) -#define OMAP4_HSI_DR1_MB_SHIFT 20 -#define OMAP4_HSI_DR1_MB_MASK (0x3 << 20) -#define OMAP4_HSI_DR2_MB_SHIFT 18 -#define OMAP4_HSI_DR2_MB_MASK (0x3 << 18) -#define OMAP4_HSI_DR3_MB_SHIFT 16 -#define OMAP4_HSI_DR3_MB_MASK (0x3 << 16) -#define OMAP4_MCBSP2_DR0_MB_SHIFT 14 -#define OMAP4_MCBSP2_DR0_MB_MASK (0x3 << 14) -#define OMAP4_MCSPI4_DR0_MB_SHIFT 12 -#define OMAP4_MCSPI4_DR0_MB_MASK (0x3 << 12) -#define OMAP4_MCSPI4_DR1_MB_SHIFT 10 -#define OMAP4_MCSPI4_DR1_MB_MASK (0x3 << 10) -#define OMAP4_SDMMC3_DR0_MB_SHIFT 8 -#define OMAP4_SDMMC3_DR0_MB_MASK (0x3 << 8) -#define OMAP4_SPI2_DR0_MB_SHIFT 0 -#define OMAP4_SPI2_DR0_MB_MASK (0x3 << 0) - -/* CONTROL_SMART3IO_PADCONF_1 */ -#define OMAP4_SPI2_DR1_MB_SHIFT 30 -#define OMAP4_SPI2_DR1_MB_MASK (0x3 << 30) -#define OMAP4_SPI2_DR2_MB_SHIFT 28 -#define OMAP4_SPI2_DR2_MB_MASK (0x3 << 28) -#define OMAP4_UART2_DR0_MB_SHIFT 26 -#define OMAP4_UART2_DR0_MB_MASK (0x3 << 26) -#define OMAP4_UART2_DR1_MB_SHIFT 24 -#define OMAP4_UART2_DR1_MB_MASK (0x3 << 24) -#define OMAP4_UART4_DR0_MB_SHIFT 22 -#define OMAP4_UART4_DR0_MB_MASK (0x3 << 22) -#define OMAP4_HSI_DR0_MB_SHIFT 20 -#define OMAP4_HSI_DR0_MB_MASK (0x3 << 20) - -/* CONTROL_SMART3IO_PADCONF_2 */ -#define OMAP4_DMIC_DR0_LB_SHIFT 31 -#define OMAP4_DMIC_DR0_LB_MASK (1 << 31) -#define OMAP4_GPIO_DR3_LB_SHIFT 30 -#define OMAP4_GPIO_DR3_LB_MASK (1 << 30) -#define OMAP4_GPIO_DR4_LB_SHIFT 29 -#define OMAP4_GPIO_DR4_LB_MASK (1 << 29) -#define OMAP4_GPIO_DR5_LB_SHIFT 28 -#define OMAP4_GPIO_DR5_LB_MASK (1 << 28) -#define OMAP4_GPIO_DR6_LB_SHIFT 27 -#define OMAP4_GPIO_DR6_LB_MASK (1 << 27) -#define OMAP4_HSI_DR1_LB_SHIFT 26 -#define OMAP4_HSI_DR1_LB_MASK (1 << 26) -#define OMAP4_HSI_DR2_LB_SHIFT 25 -#define OMAP4_HSI_DR2_LB_MASK (1 << 25) -#define OMAP4_HSI_DR3_LB_SHIFT 24 -#define OMAP4_HSI_DR3_LB_MASK (1 << 24) -#define OMAP4_MCBSP2_DR0_LB_SHIFT 23 -#define OMAP4_MCBSP2_DR0_LB_MASK (1 << 23) -#define OMAP4_MCSPI4_DR0_LB_SHIFT 22 -#define OMAP4_MCSPI4_DR0_LB_MASK (1 << 22) -#define OMAP4_MCSPI4_DR1_LB_SHIFT 21 -#define OMAP4_MCSPI4_DR1_LB_MASK (1 << 21) -#define OMAP4_SLIMBUS2_DR0_LB_SHIFT 18 -#define OMAP4_SLIMBUS2_DR0_LB_MASK (1 << 18) -#define OMAP4_SPI2_DR0_LB_SHIFT 16 -#define OMAP4_SPI2_DR0_LB_MASK (1 << 16) -#define OMAP4_SPI2_DR1_LB_SHIFT 15 -#define OMAP4_SPI2_DR1_LB_MASK (1 << 15) -#define OMAP4_SPI2_DR2_LB_SHIFT 14 -#define OMAP4_SPI2_DR2_LB_MASK (1 << 14) -#define OMAP4_UART2_DR0_LB_SHIFT 13 -#define OMAP4_UART2_DR0_LB_MASK (1 << 13) -#define OMAP4_UART2_DR1_LB_SHIFT 12 -#define OMAP4_UART2_DR1_LB_MASK (1 << 12) -#define OMAP4_UART4_DR0_LB_SHIFT 11 -#define OMAP4_UART4_DR0_LB_MASK (1 << 11) -#define OMAP4_HSI_DR0_LB_SHIFT 10 -#define OMAP4_HSI_DR0_LB_MASK (1 << 10) - -/* CONTROL_USBB_HSIC */ -#define OMAP4_USBB2_DR1_SR_SHIFT 30 -#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30) -#define OMAP4_USBB2_DR1_I_SHIFT 27 -#define OMAP4_USBB2_DR1_I_MASK (0x7 << 27) -#define OMAP4_USBB1_DR1_SR_SHIFT 25 -#define OMAP4_USBB1_DR1_SR_MASK (0x3 << 25) -#define OMAP4_USBB1_DR1_I_SHIFT 22 -#define OMAP4_USBB1_DR1_I_MASK (0x7 << 22) -#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT 20 -#define OMAP4_USBB1_HSIC_DATA_WD_MASK (0x3 << 20) -#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT 18 -#define OMAP4_USBB1_HSIC_STROBE_WD_MASK (0x3 << 18) -#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT 16 -#define OMAP4_USBB2_HSIC_DATA_WD_MASK (0x3 << 16) -#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT 14 -#define OMAP4_USBB2_HSIC_STROBE_WD_MASK (0x3 << 14) -#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 13 -#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 13) -#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT 11 -#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 11) -#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 10 -#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 10) -#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT 8 -#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 8) -#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 7 -#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 7) -#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT 5 -#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 5) -#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 4 -#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 4) -#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT 2 -#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 2) - -/* CONTROL_SLIMBUS */ -#define OMAP4_SLIMBUS1_DR0_MB_SHIFT 30 -#define OMAP4_SLIMBUS1_DR0_MB_MASK (0x3 << 30) -#define OMAP4_SLIMBUS1_DR1_MB_SHIFT 28 -#define OMAP4_SLIMBUS1_DR1_MB_MASK (0x3 << 28) -#define OMAP4_SLIMBUS2_DR0_MB_SHIFT 26 -#define OMAP4_SLIMBUS2_DR0_MB_MASK (0x3 << 26) -#define OMAP4_SLIMBUS2_DR1_MB_SHIFT 24 -#define OMAP4_SLIMBUS2_DR1_MB_MASK (0x3 << 24) -#define OMAP4_SLIMBUS2_DR2_MB_SHIFT 22 -#define OMAP4_SLIMBUS2_DR2_MB_MASK (0x3 << 22) -#define OMAP4_SLIMBUS2_DR3_MB_SHIFT 20 -#define OMAP4_SLIMBUS2_DR3_MB_MASK (0x3 << 20) -#define OMAP4_SLIMBUS1_DR0_LB_SHIFT 19 -#define OMAP4_SLIMBUS1_DR0_LB_MASK (1 << 19) -#define OMAP4_SLIMBUS2_DR1_LB_SHIFT 18 -#define OMAP4_SLIMBUS2_DR1_LB_MASK (1 << 18) - -/* CONTROL_PBIASLITE */ -#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT 31 -#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK (1 << 31) -#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT 30 -#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 30) -#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT 29 -#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK (1 << 29) -#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT 28 -#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK (1 << 28) -#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT 27 -#define OMAP4_USIM_PBIASLITE_VMODE_MASK (1 << 27) -#define OMAP4_MMC1_PWRDNZ_SHIFT 26 -#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26) -#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT 25 -#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK (1 << 25) -#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT 24 -#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 24) -#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT 23 -#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23) -#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT 22 -#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22) -#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT 21 -#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21) -#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT 20 -#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK (1 << 20) - -/* CONTROL_I2C_0 */ -#define OMAP4_I2C4_SDA_GLFENB_SHIFT 31 -#define OMAP4_I2C4_SDA_GLFENB_MASK (1 << 31) -#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT 29 -#define OMAP4_I2C4_SDA_LOAD_BITS_MASK (0x3 << 29) -#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT 28 -#define OMAP4_I2C4_SDA_PULLUPRESX_MASK (1 << 28) -#define OMAP4_I2C3_SDA_GLFENB_SHIFT 27 -#define OMAP4_I2C3_SDA_GLFENB_MASK (1 << 27) -#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT 25 -#define OMAP4_I2C3_SDA_LOAD_BITS_MASK (0x3 << 25) -#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT 24 -#define OMAP4_I2C3_SDA_PULLUPRESX_MASK (1 << 24) -#define OMAP4_I2C2_SDA_GLFENB_SHIFT 23 -#define OMAP4_I2C2_SDA_GLFENB_MASK (1 << 23) -#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT 21 -#define OMAP4_I2C2_SDA_LOAD_BITS_MASK (0x3 << 21) -#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT 20 -#define OMAP4_I2C2_SDA_PULLUPRESX_MASK (1 << 20) -#define OMAP4_I2C1_SDA_GLFENB_SHIFT 19 -#define OMAP4_I2C1_SDA_GLFENB_MASK (1 << 19) -#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT 17 -#define OMAP4_I2C1_SDA_LOAD_BITS_MASK (0x3 << 17) -#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT 16 -#define OMAP4_I2C1_SDA_PULLUPRESX_MASK (1 << 16) -#define OMAP4_I2C4_SCL_GLFENB_SHIFT 15 -#define OMAP4_I2C4_SCL_GLFENB_MASK (1 << 15) -#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT 13 -#define OMAP4_I2C4_SCL_LOAD_BITS_MASK (0x3 << 13) -#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT 12 -#define OMAP4_I2C4_SCL_PULLUPRESX_MASK (1 << 12) -#define OMAP4_I2C3_SCL_GLFENB_SHIFT 11 -#define OMAP4_I2C3_SCL_GLFENB_MASK (1 << 11) -#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT 9 -#define OMAP4_I2C3_SCL_LOAD_BITS_MASK (0x3 << 9) -#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT 8 -#define OMAP4_I2C3_SCL_PULLUPRESX_MASK (1 << 8) -#define OMAP4_I2C2_SCL_GLFENB_SHIFT 7 -#define OMAP4_I2C2_SCL_GLFENB_MASK (1 << 7) -#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT 5 -#define OMAP4_I2C2_SCL_LOAD_BITS_MASK (0x3 << 5) -#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT 4 -#define OMAP4_I2C2_SCL_PULLUPRESX_MASK (1 << 4) -#define OMAP4_I2C1_SCL_GLFENB_SHIFT 3 -#define OMAP4_I2C1_SCL_GLFENB_MASK (1 << 3) -#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT 1 -#define OMAP4_I2C1_SCL_LOAD_BITS_MASK (0x3 << 1) -#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT 0 -#define OMAP4_I2C1_SCL_PULLUPRESX_MASK (1 << 0) - -/* CONTROL_CAMERA_RX */ -#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT 31 -#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK (1 << 31) -#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29 -#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29) -#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24 -#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT 22 -#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK (0x3 << 22) -#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21 -#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21) -#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19 -#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19) -#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18 -#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18) -#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16 -#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16) - -/* CONTROL_AVDAC */ -#define OMAP4_AVDAC_ACEN_SHIFT 31 -#define OMAP4_AVDAC_ACEN_MASK (1 << 31) -#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT 30 -#define OMAP4_AVDAC_TVOUTBYPASS_MASK (1 << 30) -#define OMAP4_AVDAC_INPUTINV_SHIFT 29 -#define OMAP4_AVDAC_INPUTINV_MASK (1 << 29) -#define OMAP4_AVDAC_CTL_SHIFT 13 -#define OMAP4_AVDAC_CTL_MASK (0xffff << 13) -#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT 12 -#define OMAP4_AVDAC_CTL_WR_ACK_MASK (1 << 12) - -/* CONTROL_HDMI_TX_PHY */ -#define OMAP4_HDMITXPHY_PADORDER_SHIFT 31 -#define OMAP4_HDMITXPHY_PADORDER_MASK (1 << 31) -#define OMAP4_HDMITXPHY_TXVALID_SHIFT 30 -#define OMAP4_HDMITXPHY_TXVALID_MASK (1 << 30) -#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT 29 -#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK (1 << 29) -#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT 28 -#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK (1 << 28) - -/* CONTROL_MMC2 */ -#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT 31 -#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK (1 << 31) - -/* CONTROL_DSIPHY */ -#define OMAP4_DSI2_LANEENABLE_SHIFT 29 -#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) -#define OMAP4_DSI1_LANEENABLE_SHIFT 24 -#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_DSI1_PIPD_SHIFT 19 -#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) -#define OMAP4_DSI2_PIPD_SHIFT 14 -#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) - -/* CONTROL_MCBSPLP */ -#define OMAP4_ALBCTRLRX_FSX_SHIFT 31 -#define OMAP4_ALBCTRLRX_FSX_MASK (1 << 31) -#define OMAP4_ALBCTRLRX_CLKX_SHIFT 30 -#define OMAP4_ALBCTRLRX_CLKX_MASK (1 << 30) -#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT 29 -#define OMAP4_ABE_MCBSP1_DR_EN_MASK (1 << 29) - -/* CONTROL_USB2PHYCORE */ -#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT 31 -#define OMAP4_USB2PHY_AUTORESUME_EN_MASK (1 << 31) -#define OMAP4_USB2PHY_DISCHGDET_SHIFT 30 -#define OMAP4_USB2PHY_DISCHGDET_MASK (1 << 30) -#define OMAP4_USB2PHY_GPIOMODE_SHIFT 29 -#define OMAP4_USB2PHY_GPIOMODE_MASK (1 << 29) -#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT 28 -#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK (1 << 28) -#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT 27 -#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK (1 << 27) -#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT 26 -#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK (1 << 26) -#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT 25 -#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK (1 << 25) -#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT 24 -#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK (1 << 24) -#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT 21 -#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK (0x7 << 21) -#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT 20 -#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK (1 << 20) -#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT 19 -#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK (1 << 19) -#define OMAP4_USB2PHY_DATADET_SHIFT 18 -#define OMAP4_USB2PHY_DATADET_MASK (1 << 18) -#define OMAP4_USB2PHY_SINKONDP_SHIFT 17 -#define OMAP4_USB2PHY_SINKONDP_MASK (1 << 17) -#define OMAP4_USB2PHY_SRCONDM_SHIFT 16 -#define OMAP4_USB2PHY_SRCONDM_MASK (1 << 16) -#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT 15 -#define OMAP4_USB2PHY_RESTARTCHGDET_MASK (1 << 15) -#define OMAP4_USB2PHY_CHGDETDONE_SHIFT 14 -#define OMAP4_USB2PHY_CHGDETDONE_MASK (1 << 14) -#define OMAP4_USB2PHY_CHGDETECTED_SHIFT 13 -#define OMAP4_USB2PHY_CHGDETECTED_MASK (1 << 13) -#define OMAP4_USB2PHY_MCPCPUEN_SHIFT 12 -#define OMAP4_USB2PHY_MCPCPUEN_MASK (1 << 12) -#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT 11 -#define OMAP4_USB2PHY_MCPCMODEEN_MASK (1 << 11) -#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT 10 -#define OMAP4_USB2PHY_RESETDONEMCLK_MASK (1 << 10) -#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT 9 -#define OMAP4_USB2PHY_UTMIRESETDONE_MASK (1 << 9) -#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT 8 -#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK (1 << 8) -#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT 7 -#define OMAP4_USB2PHY_DATAPOLARITYN_MASK (1 << 7) -#define OMAP4_USBDPLL_FREQLOCK_SHIFT 6 -#define OMAP4_USBDPLL_FREQLOCK_MASK (1 << 6) -#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT 5 -#define OMAP4_USB2PHY_RESETDONETCLK_MASK (1 << 5) - -/* CONTROL_I2C_1 */ -#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT 31 -#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK (1 << 31) -#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT 29 -#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK (0x3 << 29) -#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT 28 -#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28) -#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT 27 -#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK (1 << 27) -#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT 25 -#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK (0x3 << 25) -#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT 24 -#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24) -#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT 23 -#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK (1 << 23) -#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT 22 -#define OMAP4_HDMI_DDC_SDA_NMODE_MASK (1 << 22) -#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT 21 -#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK (1 << 21) -#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT 20 -#define OMAP4_HDMI_DDC_SCL_NMODE_MASK (1 << 20) - -/* CONTROL_MMC1 */ -#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT 31 -#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31) -#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT 30 -#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30) -#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT 29 -#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29) -#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT 28 -#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28) -#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT 27 -#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27) -#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT 26 -#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26) -#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT 25 -#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25) -#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT 24 -#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK (1 << 24) -#define OMAP4_USB_FD_CDEN_SHIFT 23 -#define OMAP4_USB_FD_CDEN_MASK (1 << 23) -#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT 22 -#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK (1 << 22) -#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT 21 -#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK (1 << 21) - -/* CONTROL_HSI */ -#define OMAP4_HSI1_CALLOOP_SEL_SHIFT 31 -#define OMAP4_HSI1_CALLOOP_SEL_MASK (1 << 31) -#define OMAP4_HSI1_CALMUX_SEL_SHIFT 30 -#define OMAP4_HSI1_CALMUX_SEL_MASK (1 << 30) -#define OMAP4_HSI2_CALLOOP_SEL_SHIFT 29 -#define OMAP4_HSI2_CALLOOP_SEL_MASK (1 << 29) -#define OMAP4_HSI2_CALMUX_SEL_SHIFT 28 -#define OMAP4_HSI2_CALMUX_SEL_MASK (1 << 28) - -/* CONTROL_USB */ -#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT 31 -#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK (1 << 31) -#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT 30 -#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK (1 << 30) - -/* CONTROL_HDQ */ -#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT 31 -#define OMAP4_HDQ_SIO_PWRDNZ_MASK (1 << 31) - -/* CONTROL_LPDDR2IO1_0 */ -#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT 30 -#define OMAP4_LPDDR2IO1_GR4_SR_MASK (0x3 << 30) -#define OMAP4_LPDDR2IO1_GR4_I_SHIFT 27 -#define OMAP4_LPDDR2IO1_GR4_I_MASK (0x7 << 27) -#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT 25 -#define OMAP4_LPDDR2IO1_GR4_WD_MASK (0x3 << 25) -#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT 22 -#define OMAP4_LPDDR2IO1_GR3_SR_MASK (0x3 << 22) -#define OMAP4_LPDDR2IO1_GR3_I_SHIFT 19 -#define OMAP4_LPDDR2IO1_GR3_I_MASK (0x7 << 19) -#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT 17 -#define OMAP4_LPDDR2IO1_GR3_WD_MASK (0x3 << 17) -#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT 14 -#define OMAP4_LPDDR2IO1_GR2_SR_MASK (0x3 << 14) -#define OMAP4_LPDDR2IO1_GR2_I_SHIFT 11 -#define OMAP4_LPDDR2IO1_GR2_I_MASK (0x7 << 11) -#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT 9 -#define OMAP4_LPDDR2IO1_GR2_WD_MASK (0x3 << 9) -#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT 6 -#define OMAP4_LPDDR2IO1_GR1_SR_MASK (0x3 << 6) -#define OMAP4_LPDDR2IO1_GR1_I_SHIFT 3 -#define OMAP4_LPDDR2IO1_GR1_I_MASK (0x7 << 3) -#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT 1 -#define OMAP4_LPDDR2IO1_GR1_WD_MASK (0x3 << 1) - -/* CONTROL_LPDDR2IO1_1 */ -#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT 30 -#define OMAP4_LPDDR2IO1_GR8_SR_MASK (0x3 << 30) -#define OMAP4_LPDDR2IO1_GR8_I_SHIFT 27 -#define OMAP4_LPDDR2IO1_GR8_I_MASK (0x7 << 27) -#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT 25 -#define OMAP4_LPDDR2IO1_GR8_WD_MASK (0x3 << 25) -#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT 22 -#define OMAP4_LPDDR2IO1_GR7_SR_MASK (0x3 << 22) -#define OMAP4_LPDDR2IO1_GR7_I_SHIFT 19 -#define OMAP4_LPDDR2IO1_GR7_I_MASK (0x7 << 19) -#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT 17 -#define OMAP4_LPDDR2IO1_GR7_WD_MASK (0x3 << 17) -#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT 14 -#define OMAP4_LPDDR2IO1_GR6_SR_MASK (0x3 << 14) -#define OMAP4_LPDDR2IO1_GR6_I_SHIFT 11 -#define OMAP4_LPDDR2IO1_GR6_I_MASK (0x7 << 11) -#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT 9 -#define OMAP4_LPDDR2IO1_GR6_WD_MASK (0x3 << 9) -#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT 6 -#define OMAP4_LPDDR2IO1_GR5_SR_MASK (0x3 << 6) -#define OMAP4_LPDDR2IO1_GR5_I_SHIFT 3 -#define OMAP4_LPDDR2IO1_GR5_I_MASK (0x7 << 3) -#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT 1 -#define OMAP4_LPDDR2IO1_GR5_WD_MASK (0x3 << 1) - -/* CONTROL_LPDDR2IO1_2 */ -#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT 30 -#define OMAP4_LPDDR2IO1_GR11_SR_MASK (0x3 << 30) -#define OMAP4_LPDDR2IO1_GR11_I_SHIFT 27 -#define OMAP4_LPDDR2IO1_GR11_I_MASK (0x7 << 27) -#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT 25 -#define OMAP4_LPDDR2IO1_GR11_WD_MASK (0x3 << 25) -#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT 22 -#define OMAP4_LPDDR2IO1_GR10_SR_MASK (0x3 << 22) -#define OMAP4_LPDDR2IO1_GR10_I_SHIFT 19 -#define OMAP4_LPDDR2IO1_GR10_I_MASK (0x7 << 19) -#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT 17 -#define OMAP4_LPDDR2IO1_GR10_WD_MASK (0x3 << 17) -#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT 14 -#define OMAP4_LPDDR2IO1_GR9_SR_MASK (0x3 << 14) -#define OMAP4_LPDDR2IO1_GR9_I_SHIFT 11 -#define OMAP4_LPDDR2IO1_GR9_I_MASK (0x7 << 11) -#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT 9 -#define OMAP4_LPDDR2IO1_GR9_WD_MASK (0x3 << 9) - -/* CONTROL_LPDDR2IO1_3 */ -#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT 31 -#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK (1 << 31) -#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT 30 -#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK (1 << 30) -#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT 29 -#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK (1 << 29) -#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT 28 -#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK (1 << 28) -#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT 27 -#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK (1 << 27) -#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT 26 -#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK (1 << 26) -#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT 25 -#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK (1 << 25) -#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT 24 -#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK (1 << 24) -#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT 23 -#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK (1 << 23) -#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT 22 -#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK (1 << 22) -#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT 21 -#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK (1 << 21) -#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT 20 -#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK (1 << 20) -#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT 19 -#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK (1 << 19) -#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT 18 -#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK (1 << 18) -#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT 17 -#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK (1 << 17) -#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT 16 -#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK (1 << 16) -#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT 15 -#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK (1 << 15) -#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT 14 -#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK (1 << 14) -#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT 13 -#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK (1 << 13) -#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT 12 -#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK (1 << 12) - -/* CONTROL_LPDDR2IO2_0 */ -#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT 30 -#define OMAP4_LPDDR2IO2_GR4_SR_MASK (0x3 << 30) -#define OMAP4_LPDDR2IO2_GR4_I_SHIFT 27 -#define OMAP4_LPDDR2IO2_GR4_I_MASK (0x7 << 27) -#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT 25 -#define OMAP4_LPDDR2IO2_GR4_WD_MASK (0x3 << 25) -#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT 22 -#define OMAP4_LPDDR2IO2_GR3_SR_MASK (0x3 << 22) -#define OMAP4_LPDDR2IO2_GR3_I_SHIFT 19 -#define OMAP4_LPDDR2IO2_GR3_I_MASK (0x7 << 19) -#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT 17 -#define OMAP4_LPDDR2IO2_GR3_WD_MASK (0x3 << 17) -#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT 14 -#define OMAP4_LPDDR2IO2_GR2_SR_MASK (0x3 << 14) -#define OMAP4_LPDDR2IO2_GR2_I_SHIFT 11 -#define OMAP4_LPDDR2IO2_GR2_I_MASK (0x7 << 11) -#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT 9 -#define OMAP4_LPDDR2IO2_GR2_WD_MASK (0x3 << 9) -#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT 6 -#define OMAP4_LPDDR2IO2_GR1_SR_MASK (0x3 << 6) -#define OMAP4_LPDDR2IO2_GR1_I_SHIFT 3 -#define OMAP4_LPDDR2IO2_GR1_I_MASK (0x7 << 3) -#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT 1 -#define OMAP4_LPDDR2IO2_GR1_WD_MASK (0x3 << 1) - -/* CONTROL_LPDDR2IO2_1 */ -#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT 30 -#define OMAP4_LPDDR2IO2_GR8_SR_MASK (0x3 << 30) -#define OMAP4_LPDDR2IO2_GR8_I_SHIFT 27 -#define OMAP4_LPDDR2IO2_GR8_I_MASK (0x7 << 27) -#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT 25 -#define OMAP4_LPDDR2IO2_GR8_WD_MASK (0x3 << 25) -#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT 22 -#define OMAP4_LPDDR2IO2_GR7_SR_MASK (0x3 << 22) -#define OMAP4_LPDDR2IO2_GR7_I_SHIFT 19 -#define OMAP4_LPDDR2IO2_GR7_I_MASK (0x7 << 19) -#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT 17 -#define OMAP4_LPDDR2IO2_GR7_WD_MASK (0x3 << 17) -#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT 14 -#define OMAP4_LPDDR2IO2_GR6_SR_MASK (0x3 << 14) -#define OMAP4_LPDDR2IO2_GR6_I_SHIFT 11 -#define OMAP4_LPDDR2IO2_GR6_I_MASK (0x7 << 11) -#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT 9 -#define OMAP4_LPDDR2IO2_GR6_WD_MASK (0x3 << 9) -#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT 6 -#define OMAP4_LPDDR2IO2_GR5_SR_MASK (0x3 << 6) -#define OMAP4_LPDDR2IO2_GR5_I_SHIFT 3 -#define OMAP4_LPDDR2IO2_GR5_I_MASK (0x7 << 3) -#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT 1 -#define OMAP4_LPDDR2IO2_GR5_WD_MASK (0x3 << 1) - -/* CONTROL_LPDDR2IO2_2 */ -#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT 30 -#define OMAP4_LPDDR2IO2_GR11_SR_MASK (0x3 << 30) -#define OMAP4_LPDDR2IO2_GR11_I_SHIFT 27 -#define OMAP4_LPDDR2IO2_GR11_I_MASK (0x7 << 27) -#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT 25 -#define OMAP4_LPDDR2IO2_GR11_WD_MASK (0x3 << 25) -#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT 22 -#define OMAP4_LPDDR2IO2_GR10_SR_MASK (0x3 << 22) -#define OMAP4_LPDDR2IO2_GR10_I_SHIFT 19 -#define OMAP4_LPDDR2IO2_GR10_I_MASK (0x7 << 19) -#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT 17 -#define OMAP4_LPDDR2IO2_GR10_WD_MASK (0x3 << 17) -#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT 14 -#define OMAP4_LPDDR2IO2_GR9_SR_MASK (0x3 << 14) -#define OMAP4_LPDDR2IO2_GR9_I_SHIFT 11 -#define OMAP4_LPDDR2IO2_GR9_I_MASK (0x7 << 11) -#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT 9 -#define OMAP4_LPDDR2IO2_GR9_WD_MASK (0x3 << 9) - -/* CONTROL_LPDDR2IO2_3 */ -#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT 31 -#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK (1 << 31) -#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT 30 -#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK (1 << 30) -#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT 29 -#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK (1 << 29) -#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT 28 -#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK (1 << 28) -#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT 27 -#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK (1 << 27) -#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT 26 -#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK (1 << 26) -#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT 25 -#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK (1 << 25) -#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT 24 -#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK (1 << 24) -#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT 23 -#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK (1 << 23) -#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT 22 -#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK (1 << 22) -#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT 21 -#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK (1 << 21) -#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT 20 -#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK (1 << 20) -#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT 19 -#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK (1 << 19) -#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT 18 -#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK (1 << 18) -#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT 17 -#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK (1 << 17) -#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT 16 -#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK (1 << 16) -#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT 15 -#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK (1 << 15) -#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT 14 -#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK (1 << 14) -#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT 13 -#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK (1 << 13) -#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT 12 -#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK (1 << 12) - -/* CONTROL_BUS_HOLD */ -#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT 31 -#define OMAP4_ABE_DMIC_DIN3_EN_MASK (1 << 31) -#define OMAP4_MCSPI1_CS3_EN_SHIFT 30 -#define OMAP4_MCSPI1_CS3_EN_MASK (1 << 30) - -/* CONTROL_C2C */ -#define OMAP4_MIRROR_MODE_EN_SHIFT 31 -#define OMAP4_MIRROR_MODE_EN_MASK (1 << 31) -#define OMAP4_C2C_SPARE_SHIFT 24 -#define OMAP4_C2C_SPARE_MASK (0x7f << 24) - -/* CORE_CONTROL_SPARE_RW */ -#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT 0 -#define OMAP4_CORE_CONTROL_SPARE_RW_MASK (0xffffffff << 0) - -/* CORE_CONTROL_SPARE_R */ -#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT 0 -#define OMAP4_CORE_CONTROL_SPARE_R_MASK (0xffffffff << 0) - -/* CORE_CONTROL_SPARE_R_C0 */ -#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT 31 -#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK (1 << 31) -#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT 30 -#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK (1 << 30) -#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT 29 -#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK (1 << 29) -#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT 28 -#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK (1 << 28) -#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT 27 -#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK (1 << 27) -#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT 26 -#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK (1 << 26) -#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT 25 -#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK (1 << 25) -#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT 24 -#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK (1 << 24) - -/* CONTROL_EFUSE_1 */ -#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT 24 -#define OMAP4_AVDAC_TRIM_BYTE3_MASK (0x7f << 24) -#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT 16 -#define OMAP4_AVDAC_TRIM_BYTE2_MASK (0xff << 16) -#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT 8 -#define OMAP4_AVDAC_TRIM_BYTE1_MASK (0xff << 8) -#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT 0 -#define OMAP4_AVDAC_TRIM_BYTE0_MASK (0xff << 0) - -/* CONTROL_EFUSE_2 */ -#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT 31 -#define OMAP4_EFUSE_SMART2TEST_P0_MASK (1 << 31) -#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT 30 -#define OMAP4_EFUSE_SMART2TEST_P1_MASK (1 << 30) -#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT 29 -#define OMAP4_EFUSE_SMART2TEST_P2_MASK (1 << 29) -#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT 28 -#define OMAP4_EFUSE_SMART2TEST_P3_MASK (1 << 28) -#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT 27 -#define OMAP4_EFUSE_SMART2TEST_N0_MASK (1 << 27) -#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT 26 -#define OMAP4_EFUSE_SMART2TEST_N1_MASK (1 << 26) -#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT 25 -#define OMAP4_EFUSE_SMART2TEST_N2_MASK (1 << 25) -#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT 24 -#define OMAP4_EFUSE_SMART2TEST_N3_MASK (1 << 24) -#define OMAP4_LPDDR2_PTV_N1_SHIFT 23 -#define OMAP4_LPDDR2_PTV_N1_MASK (1 << 23) -#define OMAP4_LPDDR2_PTV_N2_SHIFT 22 -#define OMAP4_LPDDR2_PTV_N2_MASK (1 << 22) -#define OMAP4_LPDDR2_PTV_N3_SHIFT 21 -#define OMAP4_LPDDR2_PTV_N3_MASK (1 << 21) -#define OMAP4_LPDDR2_PTV_N4_SHIFT 20 -#define OMAP4_LPDDR2_PTV_N4_MASK (1 << 20) -#define OMAP4_LPDDR2_PTV_N5_SHIFT 19 -#define OMAP4_LPDDR2_PTV_N5_MASK (1 << 19) -#define OMAP4_LPDDR2_PTV_P1_SHIFT 18 -#define OMAP4_LPDDR2_PTV_P1_MASK (1 << 18) -#define OMAP4_LPDDR2_PTV_P2_SHIFT 17 -#define OMAP4_LPDDR2_PTV_P2_MASK (1 << 17) -#define OMAP4_LPDDR2_PTV_P3_SHIFT 16 -#define OMAP4_LPDDR2_PTV_P3_MASK (1 << 16) -#define OMAP4_LPDDR2_PTV_P4_SHIFT 15 -#define OMAP4_LPDDR2_PTV_P4_MASK (1 << 15) -#define OMAP4_LPDDR2_PTV_P5_SHIFT 14 -#define OMAP4_LPDDR2_PTV_P5_MASK (1 << 14) - -/* CONTROL_EFUSE_3 */ -#define OMAP4_STD_FUSE_SPARE_1_SHIFT 24 -#define OMAP4_STD_FUSE_SPARE_1_MASK (0xff << 24) -#define OMAP4_STD_FUSE_SPARE_2_SHIFT 16 -#define OMAP4_STD_FUSE_SPARE_2_MASK (0xff << 16) -#define OMAP4_STD_FUSE_SPARE_3_SHIFT 8 -#define OMAP4_STD_FUSE_SPARE_3_MASK (0xff << 8) -#define OMAP4_STD_FUSE_SPARE_4_SHIFT 0 -#define OMAP4_STD_FUSE_SPARE_4_MASK (0xff << 0) - -/* CONTROL_EFUSE_4 */ -#define OMAP4_STD_FUSE_SPARE_5_SHIFT 24 -#define OMAP4_STD_FUSE_SPARE_5_MASK (0xff << 24) -#define OMAP4_STD_FUSE_SPARE_6_SHIFT 16 -#define OMAP4_STD_FUSE_SPARE_6_MASK (0xff << 16) -#define OMAP4_STD_FUSE_SPARE_7_SHIFT 8 -#define OMAP4_STD_FUSE_SPARE_7_MASK (0xff << 8) -#define OMAP4_STD_FUSE_SPARE_8_SHIFT 0 -#define OMAP4_STD_FUSE_SPARE_8_MASK (0xff << 0) - -#endif diff --git a/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h deleted file mode 100644 index 17c9b37042c0..000000000000 --- a/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * - * Benoit Cousson (b-cousson@ti.com) - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H -#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H - - -/* Base address */ -#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000 - -/* Registers offset */ -#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION 0x0000 -#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO 0x0004 -#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG 0x0010 -#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0 0x007c -#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0 0x05a0 -#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1 0x05a4 -#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE 0x05a8 -#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR 0x05ac -#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO 0x0600 -#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604 -#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG 0x0608 -#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS 0x060c -#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW 0x0614 -#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R 0x0618 -#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0 0x061c - -/* Registers shifts and masks */ - -/* IP_REVISION */ -#define OMAP4_IP_REV_SCHEME_SHIFT 30 -#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30) -#define OMAP4_IP_REV_FUNC_SHIFT 16 -#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16) -#define OMAP4_IP_REV_RTL_SHIFT 11 -#define OMAP4_IP_REV_RTL_MASK (0x1f << 11) -#define OMAP4_IP_REV_MAJOR_SHIFT 8 -#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8) -#define OMAP4_IP_REV_CUSTOM_SHIFT 6 -#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6) -#define OMAP4_IP_REV_MINOR_SHIFT 0 -#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0) - -/* IP_HWINFO */ -#define OMAP4_IP_HWINFO_SHIFT 0 -#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0) - -/* IP_SYSCONFIG */ -#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2 -#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2) - -/* PADCONF_WAKEUPEVENT_0 */ -#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT 24 -#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK (1 << 24) -#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT 23 -#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK (1 << 23) -#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT 22 -#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK (1 << 22) -#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT 21 -#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK (1 << 21) -#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT 20 -#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK (1 << 20) -#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT 19 -#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK (1 << 19) -#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT 18 -#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK (1 << 18) -#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT 17 -#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK (1 << 17) -#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT 16 -#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 16) -#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT 15 -#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 15) -#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT 14 -#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK (1 << 14) -#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT 13 -#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK (1 << 13) -#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT 12 -#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 12) -#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT 11 -#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 11) -#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10 -#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10) -#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT 9 -#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 9) -#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT 8 -#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 8) -#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT 7 -#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK (1 << 7) -#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT 6 -#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 6) -#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT 5 -#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 5) -#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT 4 -#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK (1 << 4) -#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT 3 -#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK (1 << 3) -#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT 2 -#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK (1 << 2) -#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1 -#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1) -#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT 0 -#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK (1 << 0) - -/* CONTROL_SMART1NOPMIO_PADCONF_0 */ -#define OMAP4_FREF_DR0_SC_SHIFT 30 -#define OMAP4_FREF_DR0_SC_MASK (0x3 << 30) -#define OMAP4_FREF_DR1_SC_SHIFT 28 -#define OMAP4_FREF_DR1_SC_MASK (0x3 << 28) -#define OMAP4_FREF_DR4_SC_SHIFT 26 -#define OMAP4_FREF_DR4_SC_MASK (0x3 << 26) -#define OMAP4_FREF_DR5_SC_SHIFT 24 -#define OMAP4_FREF_DR5_SC_MASK (0x3 << 24) -#define OMAP4_FREF_DR6_SC_SHIFT 22 -#define OMAP4_FREF_DR6_SC_MASK (0x3 << 22) -#define OMAP4_FREF_DR7_SC_SHIFT 20 -#define OMAP4_FREF_DR7_SC_MASK (0x3 << 20) -#define OMAP4_GPIO_DR7_SC_SHIFT 18 -#define OMAP4_GPIO_DR7_SC_MASK (0x3 << 18) -#define OMAP4_DPM_DR0_SC_SHIFT 14 -#define OMAP4_DPM_DR0_SC_MASK (0x3 << 14) -#define OMAP4_SIM_DR0_SC_SHIFT 12 -#define OMAP4_SIM_DR0_SC_MASK (0x3 << 12) - -/* CONTROL_SMART1NOPMIO_PADCONF_1 */ -#define OMAP4_FREF_DR0_LB_SHIFT 30 -#define OMAP4_FREF_DR0_LB_MASK (0x3 << 30) -#define OMAP4_FREF_DR1_LB_SHIFT 28 -#define OMAP4_FREF_DR1_LB_MASK (0x3 << 28) -#define OMAP4_FREF_DR4_LB_SHIFT 26 -#define OMAP4_FREF_DR4_LB_MASK (0x3 << 26) -#define OMAP4_FREF_DR5_LB_SHIFT 24 -#define OMAP4_FREF_DR5_LB_MASK (0x3 << 24) -#define OMAP4_FREF_DR6_LB_SHIFT 22 -#define OMAP4_FREF_DR6_LB_MASK (0x3 << 22) -#define OMAP4_FREF_DR7_LB_SHIFT 20 -#define OMAP4_FREF_DR7_LB_MASK (0x3 << 20) -#define OMAP4_GPIO_DR7_LB_SHIFT 18 -#define OMAP4_GPIO_DR7_LB_MASK (0x3 << 18) -#define OMAP4_DPM_DR0_LB_SHIFT 14 -#define OMAP4_DPM_DR0_LB_MASK (0x3 << 14) -#define OMAP4_SIM_DR0_LB_SHIFT 12 -#define OMAP4_SIM_DR0_LB_MASK (0x3 << 12) - -/* CONTROL_PADCONF_MODE */ -#define OMAP4_VDDS_DV_FREF_SHIFT 31 -#define OMAP4_VDDS_DV_FREF_MASK (1 << 31) -#define OMAP4_VDDS_DV_BANK2_SHIFT 30 -#define OMAP4_VDDS_DV_BANK2_MASK (1 << 30) - -/* CONTROL_XTAL_OSCILLATOR */ -#define OMAP4_OSCILLATOR_BOOST_SHIFT 31 -#define OMAP4_OSCILLATOR_BOOST_MASK (1 << 31) -#define OMAP4_OSCILLATOR_OS_OUT_SHIFT 30 -#define OMAP4_OSCILLATOR_OS_OUT_MASK (1 << 30) - -/* CONTROL_USIMIO */ -#define OMAP4_PAD_USIM_CLK_LOW_SHIFT 31 -#define OMAP4_PAD_USIM_CLK_LOW_MASK (1 << 31) -#define OMAP4_PAD_USIM_RST_LOW_SHIFT 29 -#define OMAP4_PAD_USIM_RST_LOW_MASK (1 << 29) -#define OMAP4_USIM_PWRDNZ_SHIFT 28 -#define OMAP4_USIM_PWRDNZ_MASK (1 << 28) - -/* CONTROL_I2C_2 */ -#define OMAP4_SR_SDA_GLFENB_SHIFT 31 -#define OMAP4_SR_SDA_GLFENB_MASK (1 << 31) -#define OMAP4_SR_SDA_LOAD_BITS_SHIFT 29 -#define OMAP4_SR_SDA_LOAD_BITS_MASK (0x3 << 29) -#define OMAP4_SR_SDA_PULLUPRESX_SHIFT 28 -#define OMAP4_SR_SDA_PULLUPRESX_MASK (1 << 28) -#define OMAP4_SR_SCL_GLFENB_SHIFT 27 -#define OMAP4_SR_SCL_GLFENB_MASK (1 << 27) -#define OMAP4_SR_SCL_LOAD_BITS_SHIFT 25 -#define OMAP4_SR_SCL_LOAD_BITS_MASK (0x3 << 25) -#define OMAP4_SR_SCL_PULLUPRESX_SHIFT 24 -#define OMAP4_SR_SCL_PULLUPRESX_MASK (1 << 24) - -/* CONTROL_JTAG */ -#define OMAP4_JTAG_NTRST_EN_SHIFT 31 -#define OMAP4_JTAG_NTRST_EN_MASK (1 << 31) -#define OMAP4_JTAG_TCK_EN_SHIFT 30 -#define OMAP4_JTAG_TCK_EN_MASK (1 << 30) -#define OMAP4_JTAG_RTCK_EN_SHIFT 29 -#define OMAP4_JTAG_RTCK_EN_MASK (1 << 29) -#define OMAP4_JTAG_TDI_EN_SHIFT 28 -#define OMAP4_JTAG_TDI_EN_MASK (1 << 28) -#define OMAP4_JTAG_TDO_EN_SHIFT 27 -#define OMAP4_JTAG_TDO_EN_MASK (1 << 27) - -/* CONTROL_SYS */ -#define OMAP4_SYS_NRESWARM_PIPU_SHIFT 31 -#define OMAP4_SYS_NRESWARM_PIPU_MASK (1 << 31) - -/* WKUP_CONTROL_SPARE_RW */ -#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT 0 -#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK (0xffffffff << 0) - -/* WKUP_CONTROL_SPARE_R */ -#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT 0 -#define OMAP4_WKUP_CONTROL_SPARE_R_MASK (0xffffffff << 0) - -/* WKUP_CONTROL_SPARE_R_C0 */ -#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT 31 -#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK (1 << 31) -#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT 30 -#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK (1 << 30) -#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT 29 -#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK (1 << 29) -#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT 28 -#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK (1 << 28) -#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT 27 -#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK (1 << 27) -#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT 26 -#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK (1 << 26) -#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT 25 -#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK (1 << 25) -#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT 24 -#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK (1 << 24) - -#endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index b6f8f348296e..324f02bf8a51 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -432,9 +432,9 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_camera(); - omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { + omap_init_mbox(); omap_init_mcspi(); omap_init_sham(); omap_init_aes(); diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index a6d2cf1f8d02..e1a56d87599e 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -259,6 +259,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) d->dev_caps |= HS_CHANNELS_RESERVED; + if (platform_get_irq_byname(pdev, "0") < 0) + d->dev_caps |= DMA_ENGINE_HANDLE_IRQ; + /* Check the capabilities register for descriptor loading feature */ if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS) dma_common_ch_end = CCDN; diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 6d7ba37e2257..cd5f3a0b97bd 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -28,11 +28,8 @@ #include <linux/bitops.h> #include <linux/clkdev.h> -#include "soc.h" #include "clockdomain.h" #include "clock.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-34xx.h" /* CM_AUTOIDLE_PLL*.AUTO_* bit values */ #define DPLL_AUTOIDLE_DISABLE 0x0 @@ -310,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) * Set jitter correction. Jitter correction applicable for OMAP343X * only since freqsel field is no longer present on other devices. */ - if (cpu_is_omap343x()) { + if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { v = omap2_clk_readl(clk, dd->control_reg); v &= ~dd->freqsel_mask; v |= freqsel << __ffs(dd->freqsel_mask); @@ -512,7 +509,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; /* Freqsel is available only on OMAP343X devices */ - if (cpu_is_omap343x()) { + if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); WARN_ON(!freqsel); diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 52f9438b92f2..4613f1e86988 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -15,10 +15,7 @@ #include <linux/io.h> #include <linux/bitops.h> -#include "soc.h" #include "clock.h" -#include "clock44xx.h" -#include "cm-regbits-44xx.h" /* * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that @@ -29,13 +26,23 @@ #define OMAP4_DPLL_LP_FINT_MAX 1000000 #define OMAP4_DPLL_LP_FOUT_MAX 100000000 +/* + * Bitfield declarations + */ +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10) +#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11) + +/* Static rate multiplier for OMAP4 REGM4XEN clocks */ +#define OMAP4430_REGM4XEN_MULT 4 + /* Supported only on OMAP4 */ int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk) { u32 v; u32 mask; - if (!clk || !clk->clksel_reg || !cpu_is_omap44xx()) + if (!clk || !clk->clksel_reg) return -EINVAL; mask = clk->flags & CLOCK_CLKOUTX2 ? @@ -54,7 +61,7 @@ void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk) u32 v; u32 mask; - if (!clk || !clk->clksel_reg || !cpu_is_omap44xx()) + if (!clk || !clk->clksel_reg) return; mask = clk->flags & CLOCK_CLKOUTX2 ? @@ -72,7 +79,7 @@ void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk) u32 v; u32 mask; - if (!clk || !clk->clksel_reg || !cpu_is_omap44xx()) + if (!clk || !clk->clksel_reg) return; mask = clk->flags & CLOCK_CLKOUTX2 ? diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c deleted file mode 100644 index f7492df1cbba..000000000000 --- a/arch/arm/mach-omap2/dsp.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * TI's OMAP DSP platform device registration - * - * Copyright (C) 2005-2006 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * XXX The function pointers to the PRM/CM functions are incorrect and - * should be removed. No device driver should be changing PRM/CM bits - * directly; that's a layering violation -- those bits are the responsibility - * of the OMAP PM core code. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <asm/memblock.h> - -#include "control.h" -#include "cm2xxx_3xxx.h" -#include "prm2xxx_3xxx.h" -#ifdef CONFIG_TIDSPBRIDGE_DVFS -#include "omap-pm.h" -#endif -#include "soc.h" - -#include <linux/platform_data/dsp-omap.h> - -static struct platform_device *omap_dsp_pdev; - -static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { -#ifdef CONFIG_TIDSPBRIDGE_DVFS - .dsp_set_min_opp = omap_pm_dsp_set_min_opp, - .dsp_get_opp = omap_pm_dsp_get_opp, - .cpu_set_freq = omap_pm_cpu_set_freq, - .cpu_get_freq = omap_pm_cpu_get_freq, -#endif - .dsp_prm_read = omap2_prm_read_mod_reg, - .dsp_prm_write = omap2_prm_write_mod_reg, - .dsp_prm_rmw_bits = omap2_prm_rmw_mod_reg_bits, - .dsp_cm_read = omap2_cm_read_mod_reg, - .dsp_cm_write = omap2_cm_write_mod_reg, - .dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits, - - .set_bootaddr = omap_ctrl_write_dsp_boot_addr, - .set_bootmode = omap_ctrl_write_dsp_boot_mode, -}; - -static phys_addr_t omap_dsp_phys_mempool_base; - -void __init omap_dsp_reserve_sdram_memblock(void) -{ - phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; - phys_addr_t paddr; - - if (!cpu_is_omap34xx()) - return; - - if (!size) - return; - - paddr = arm_memblock_steal(size, SZ_1M); - if (!paddr) { - pr_err("%s: failed to reserve %llx bytes\n", - __func__, (unsigned long long)size); - return; - } - - omap_dsp_phys_mempool_base = paddr; -} - -static phys_addr_t omap_dsp_get_mempool_base(void) -{ - return omap_dsp_phys_mempool_base; -} - -static int __init omap_dsp_init(void) -{ - struct platform_device *pdev; - int err = -ENOMEM; - struct omap_dsp_platform_data *pdata = &omap_dsp_pdata; - - if (!cpu_is_omap34xx()) - return 0; - - pdata->phys_mempool_base = omap_dsp_get_mempool_base(); - - if (pdata->phys_mempool_base) { - pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE; - pr_info("%s: %llx bytes @ %llx\n", __func__, - (unsigned long long)pdata->phys_mempool_size, - (unsigned long long)pdata->phys_mempool_base); - } - - pdev = platform_device_alloc("omap-dsp", -1); - if (!pdev) - goto err_out; - - err = platform_device_add_data(pdev, pdata, sizeof(*pdata)); - if (err) - goto err_out; - - err = platform_device_add(pdev); - if (err) - goto err_out; - - omap_dsp_pdev = pdev; - return 0; - -err_out: - platform_device_put(pdev); - return err; -} -module_init(omap_dsp_init); - -static void __exit omap_dsp_exit(void) -{ - if (!cpu_is_omap34xx()) - return; - - platform_device_unregister(omap_dsp_pdev); -} -module_exit(omap_dsp_exit); - -MODULE_AUTHOR("Hiroshi DOYU"); -MODULE_DESCRIPTION("TI's OMAP DSP platform device registration"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 17cd39360afe..8897ad7035fd 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -24,25 +24,6 @@ /* minimum size for IO mapping */ #define NAND_IO_SIZE 4 -static struct resource gpmc_nand_resource[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ, - }, - { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device gpmc_nand_device = { - .name = "omap2-nand", - .id = 0, - .num_resources = ARRAY_SIZE(gpmc_nand_resource), - .resource = gpmc_nand_resource, -}; - static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) { /* platforms which support all ECC schemes */ @@ -50,6 +31,16 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) soc_is_omap54xx() || soc_is_dra7xx()) return 1; + if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW || + ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) { + if (cpu_is_omap24xx()) + return 0; + else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0)) + return 0; + else + return 1; + } + /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes * which require H/W based ECC error detection */ if ((cpu_is_omap34xx() || cpu_is_omap3630()) && @@ -57,14 +48,6 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) (ecc_opt == OMAP_ECC_BCH8_CODE_HW))) return 0; - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1 - * and AM33xx derivates. Other chips may be added if confirmed to work. - */ - if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) - return 0; - /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) return 1; @@ -93,43 +76,41 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, { int err = 0; struct gpmc_settings s; - struct device *dev = &gpmc_nand_device.dev; + struct platform_device *pdev; + struct resource gpmc_nand_res[] = { + { .flags = IORESOURCE_MEM, }, + { .flags = IORESOURCE_IRQ, }, + { .flags = IORESOURCE_IRQ, }, + }; - memset(&s, 0, sizeof(struct gpmc_settings)); - - gpmc_nand_device.dev.platform_data = gpmc_nand_data; + BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM); err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, - (unsigned long *)&gpmc_nand_resource[0].start); + (unsigned long *)&gpmc_nand_res[0].start); if (err < 0) { - dev_err(dev, "Cannot request GPMC CS %d, error %d\n", - gpmc_nand_data->cs, err); + pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n", + gpmc_nand_data->cs, err); return err; } - - gpmc_nand_resource[0].end = gpmc_nand_resource[0].start + - NAND_IO_SIZE - 1; - - gpmc_nand_resource[1].start = - gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); - gpmc_nand_resource[2].start = - gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); + gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1; + gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); + gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); if (gpmc_t) { err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t); if (err < 0) { - dev_err(dev, "Unable to set gpmc timings: %d\n", err); + pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", err); return err; } } + memset(&s, 0, sizeof(struct gpmc_settings)); if (gpmc_nand_data->of_node) gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); else gpmc_set_legacy(gpmc_nand_data, &s); s.device_nand = true; - err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); if (err < 0) goto out_free_cs; @@ -141,18 +122,34 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) { - dev_err(dev, "Unsupported NAND ECC scheme selected\n"); - return -EINVAL; + pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n"); + err = -EINVAL; + goto out_free_cs; } - err = platform_device_register(&gpmc_nand_device); - if (err < 0) { - dev_err(dev, "Unable to register NAND device\n"); - goto out_free_cs; + + pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs); + if (pdev) { + err = platform_device_add_resources(pdev, gpmc_nand_res, + ARRAY_SIZE(gpmc_nand_res)); + if (!err) + pdev->dev.platform_data = gpmc_nand_data; + } else { + err = -ENOMEM; + } + if (err) + goto out_free_pdev; + + err = platform_device_add(pdev); + if (err) { + dev_err(&pdev->dev, "Unable to register NAND device\n"); + goto out_free_pdev; } return 0; +out_free_pdev: + platform_device_put(pdev); out_free_cs: gpmc_cs_free(gpmc_nand_data->cs); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 1271fe902ca8..5d0667c119f6 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -731,6 +731,8 @@ int __init omap_clk_init(void) if (!omap_clk_soc_init) return 0; + ti_clk_init_features(); + ret = of_prcm_init(); if (!ret) ret = omap_clk_soc_init(); diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index f1fab5684a24..4068350f9059 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -34,8 +34,6 @@ static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused) pdata->name = oh->name; pdata->nr_tlb_entries = a->nr_tlb_entries; - pdata->da_start = a->da_start; - pdata->da_end = a->da_end; if (oh->rst_lines_cnt == 1) { pdata->reset_name = oh->rst_lines->name; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 539e8106eb96..a0fe747634c1 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -168,6 +168,10 @@ static void omap4_l2c310_write_sec(unsigned long val, unsigned reg) smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX; break; + case L310_POWER_CTRL: + pr_info_once("OMAP L2C310: ROM does not support power control setting\n"); + return; + default: WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg); return; diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 2f15979c2e9c..65b1647092bd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -16,7 +16,6 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/omap-dma.h> -#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" @@ -163,18 +162,6 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { }; /* mailbox */ -static struct omap_mbox_dev_info omap2420_mailbox_info[] = { - { .name = "dsp", .tx_id = 0, .rx_id = 1, .irq_id = 0, .usr_id = 0 }, - { .name = "iva", .tx_id = 2, .rx_id = 3, .irq_id = 1, .usr_id = 3 }, -}; - -static struct omap_mbox_pdata omap2420_mailbox_attrs = { - .num_users = 4, - .num_fifos = 6, - .info_cnt = ARRAY_SIZE(omap2420_mailbox_info), - .info = omap2420_mailbox_info, -}; - static struct omap_hwmod omap2420_mailbox_hwmod = { .name = "mailbox", .class = &omap2xxx_mailbox_hwmod_class, @@ -188,7 +175,6 @@ static struct omap_hwmod omap2420_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, - .dev_attr = &omap2420_mailbox_attrs, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 6d1b60902179..c2555cb95e71 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -17,7 +17,6 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/omap-dma.h> -#include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" @@ -161,17 +160,6 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { }; /* mailbox */ -static struct omap_mbox_dev_info omap2430_mailbox_info[] = { - { .name = "dsp", .tx_id = 0, .rx_id = 1 }, -}; - -static struct omap_mbox_pdata omap2430_mailbox_attrs = { - .num_users = 4, - .num_fifos = 6, - .info_cnt = ARRAY_SIZE(omap2430_mailbox_info), - .info = omap2430_mailbox_info, -}; - static struct omap_hwmod omap2430_mailbox_hwmod = { .name = "mailbox", .class = &omap2xxx_mailbox_hwmod_class, @@ -185,7 +173,6 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, - .dev_attr = &omap2430_mailbox_attrs, }; /* mcspi3 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c index 0413daba2dba..c1e98d589100 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c @@ -152,15 +152,6 @@ struct omap_hwmod_addr_space omap2_dma_system_addrs[] = { { } }; -struct omap_hwmod_addr_space omap2_mailbox_addrs[] = { - { - .pa_start = 0x48094000, - .pa_end = 0x48094000 + SZ_512 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = { { .name = "mpu", diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 5da7a42a6d90..c6c6384de867 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -37,46 +37,6 @@ struct omap_hwmod_class omap2_uart_class = { }; /* - * 'dss' class - * display sub-system - */ - -static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | - SYSS_HAS_RESET_STATUS), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_dss_hwmod_class = { - .name = "dss", - .sysc = &omap2_dss_sysc, - .reset = omap_dss_reset, -}; - -/* - * 'rfbi' class - * remote frame buffer interface - */ - -static struct omap_hwmod_class_sysconfig omap2_rfbi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_rfbi_hwmod_class = { - .name = "rfbi", - .sysc = &omap2_rfbi_sysc, -}; - -/* * 'venc' class * video encoder */ diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index e2db378b849e..8f5989d48a80 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -317,21 +317,11 @@ struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = { - { - .pa_start = 0x480C8000, - .pa_end = 0x480C8000 + (SZ_4K - 1), - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4 ls -> mailbox */ struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = { .master = &am33xx_l4_ls_hwmod, .slave = &am33xx_mailbox_hwmod, .clk = "l4ls_gclk", - .addr = am33xx_mailbox_addrs, .user = OCP_USER_MPU, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 1cd0cfdc03e0..e9516b454e76 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2986,8 +2986,6 @@ static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = { /* mmu isp */ static struct omap_mmu_dev_attr mmu_isp_dev_attr = { - .da_start = 0x0, - .da_end = 0xfffff000, .nr_tlb_entries = 8, }; @@ -3026,8 +3024,6 @@ static struct omap_hwmod omap3xxx_mmu_isp_hwmod = { /* mmu iva */ static struct omap_mmu_dev_attr mmu_iva_dev_attr = { - .da_start = 0x11000000, - .da_end = 0xfffff000, .nr_tlb_entries = 32, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 5c2cc8083fdd..fea01aa3ef42 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -19,6 +19,8 @@ #include "omap_hwmod.h" #include "omap_hwmod_33xx_43xx_common_data.h" #include "prcm43xx.h" +#include "omap_hwmod_common_data.h" + /* IP blocks */ static struct omap_hwmod am43xx_l4_hs_hwmod = { @@ -415,6 +417,72 @@ static struct omap_hwmod am43xx_qspi_hwmod = { }, }; +/* dss */ + +static struct omap_hwmod am43xx_dss_core_hwmod = { + .name = "dss_core", + .class = &omap2_dss_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "disp_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* dispc */ + +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = { + .manager_count = 1, + .has_framedonetv_irq = 0 +}; + +static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_MIDLEMODE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class am43xx_dispc_hwmod_class = { + .name = "dispc", + .sysc = &am43xx_dispc_sysc, +}; + +static struct omap_hwmod am43xx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &am43xx_dispc_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "disp_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, + }, + }, + .dev_attr = &am43xx_dss_dispc_dev_attr, +}; + +/* rfbi */ + +static struct omap_hwmod am43xx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap2_rfbi_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "disp_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, + }, + }, +}; + /* Interfaces */ static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { .master = &am33xx_l3_main_hwmod, @@ -654,6 +722,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = { + .master = &am43xx_dss_core_hwmod, + .slave = &am33xx_l3_main_hwmod, + .clk = "l3_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_dss_core_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_dss_dispc_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = { + .master = &am33xx_l4_ls_hwmod, + .slave = &am43xx_dss_rfbi_hwmod, + .clk = "l4ls_gclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__synctimer, &am43xx_l4_ls__timer8, @@ -748,6 +844,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__ocp2scp1, &am43xx_l3_s__usbotgss0, &am43xx_l3_s__usbotgss1, + &am43xx_dss__l3_main, + &am43xx_l4_ls__dss, + &am43xx_l4_ls__dss_dispc, + &am43xx_l4_ls__dss_rfbi, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 41e54f759934..44e5634bba34 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2084,8 +2084,6 @@ static struct omap_hwmod_class omap44xx_mmu_hwmod_class = { /* mmu ipu */ static struct omap_mmu_dev_attr mmu_ipu_dev_attr = { - .da_start = 0x0, - .da_end = 0xfffff000, .nr_tlb_entries = 32, }; @@ -2133,8 +2131,6 @@ static struct omap_hwmod omap44xx_mmu_ipu_hwmod = { /* mmu dsp */ static struct omap_mmu_dev_attr mmu_dsp_dev_attr = { - .da_start = 0x0, - .da_end = 0xfffff000, .nr_tlb_entries = 32, }; @@ -4142,21 +4138,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = { - { - .pa_start = 0x4a0f4000, - .pa_end = 0x4a0f41ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> mailbox */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_mailbox_hwmod, .clk = "l4_div_ck", - .addr = omap44xx_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 284324f2b98a..2757abf87fbc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -273,6 +273,56 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = { }; /* + * 'gmac' class + * cpsw/gmac sub system + */ +static struct omap_hwmod_class_sysconfig dra7xx_gmac_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x8, + .syss_offs = 0x4, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE | + MSTANDBY_NO), + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class dra7xx_gmac_hwmod_class = { + .name = "gmac", + .sysc = &dra7xx_gmac_sysc, +}; + +static struct omap_hwmod dra7xx_gmac_hwmod = { + .name = "gmac", + .class = &dra7xx_gmac_hwmod_class, + .clkdm_name = "gmac_clkdm", + .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), + .main_clk = "dpll_gmac_ck", + .mpu_rt_idx = 1, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_GMAC_GMAC_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'mdio' class + */ +static struct omap_hwmod_class dra7xx_mdio_hwmod_class = { + .name = "davinci_mdio", +}; + +static struct omap_hwmod dra7xx_mdio_hwmod = { + .name = "davinci_mdio", + .class = &dra7xx_mdio_hwmod_class, + .clkdm_name = "gmac_clkdm", + .main_clk = "dpll_gmac_ck", +}; + +/* * 'dcan' class * */ @@ -343,19 +393,10 @@ static struct omap_dma_dev_attr dma_dev_attr = { }; /* dma_system */ -static struct omap_hwmod_irq_info dra7xx_dma_system_irqs[] = { - { .name = "0", .irq = 12 + DRA7XX_IRQ_GIC_START }, - { .name = "1", .irq = 13 + DRA7XX_IRQ_GIC_START }, - { .name = "2", .irq = 14 + DRA7XX_IRQ_GIC_START }, - { .name = "3", .irq = 15 + DRA7XX_IRQ_GIC_START }, - { .irq = -1 } -}; - static struct omap_hwmod dra7xx_dma_system_hwmod = { .name = "dma_system", .class = &dra7xx_dma_hwmod_class, .clkdm_name = "dma_clkdm", - .mpu_irqs = dra7xx_dma_system_irqs, .main_clk = "l3_iclk_div", .prcm = { .omap4 = { @@ -939,6 +980,194 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = { }; /* + * 'mailbox' class + * + */ + +static struct omap_hwmod_class_sysconfig dra7xx_mailbox_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class dra7xx_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &dra7xx_mailbox_sysc, +}; + +/* mailbox1 */ +static struct omap_hwmod dra7xx_mailbox1_hwmod = { + .name = "mailbox1", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX1_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox2 */ +static struct omap_hwmod dra7xx_mailbox2_hwmod = { + .name = "mailbox2", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX2_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox3 */ +static struct omap_hwmod dra7xx_mailbox3_hwmod = { + .name = "mailbox3", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX3_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox4 */ +static struct omap_hwmod dra7xx_mailbox4_hwmod = { + .name = "mailbox4", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX4_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox5 */ +static struct omap_hwmod dra7xx_mailbox5_hwmod = { + .name = "mailbox5", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX5_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox6 */ +static struct omap_hwmod dra7xx_mailbox6_hwmod = { + .name = "mailbox6", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX6_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox7 */ +static struct omap_hwmod dra7xx_mailbox7_hwmod = { + .name = "mailbox7", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX7_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox8 */ +static struct omap_hwmod dra7xx_mailbox8_hwmod = { + .name = "mailbox8", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX8_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox9 */ +static struct omap_hwmod dra7xx_mailbox9_hwmod = { + .name = "mailbox9", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX9_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox10 */ +static struct omap_hwmod dra7xx_mailbox10_hwmod = { + .name = "mailbox10", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX10_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox11 */ +static struct omap_hwmod dra7xx_mailbox11_hwmod = { + .name = "mailbox11", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX11_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox12 */ +static struct omap_hwmod dra7xx_mailbox12_hwmod = { + .name = "mailbox12", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX12_CONTEXT_OFFSET, + }, + }, +}; + +/* mailbox13 */ +static struct omap_hwmod dra7xx_mailbox13_hwmod = { + .name = "mailbox13", + .class = &dra7xx_mailbox_hwmod_class, + .clkdm_name = "l4cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4CFG_MAILBOX13_CONTEXT_OFFSET, + }, + }, +}; + +/* * 'mcspi' class * */ @@ -1215,6 +1444,97 @@ static struct omap_hwmod dra7xx_ocp2scp1_hwmod = { }, }; +/* ocp2scp3 */ +static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { + .name = "ocp2scp3", + .class = &dra7xx_ocp2scp_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, +}; + +/* + * 'PCIE' class + * + */ + +static struct omap_hwmod_class dra7xx_pcie_hwmod_class = { + .name = "pcie", +}; + +/* pcie1 */ +static struct omap_hwmod dra7xx_pcie1_hwmod = { + .name = "pcie1", + .class = &dra7xx_pcie_hwmod_class, + .clkdm_name = "pcie_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* pcie2 */ +static struct omap_hwmod dra7xx_pcie2_hwmod = { + .name = "pcie2", + .class = &dra7xx_pcie_hwmod_class, + .clkdm_name = "pcie_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* + * 'PCIE PHY' class + * + */ + +static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = { + .name = "pcie-phy", +}; + +/* pcie1 phy */ +static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { + .name = "pcie1-phy", + .class = &dra7xx_pcie_phy_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* pcie2 phy */ +static struct omap_hwmod dra7xx_pcie2_phy_hwmod = { + .name = "pcie2-phy", + .class = &dra7xx_pcie_phy_hwmod_class, + .clkdm_name = "l3init_clkdm", + .main_clk = "l4_root_clk_div", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* * 'qspi' class * @@ -1249,6 +1569,38 @@ static struct omap_hwmod dra7xx_qspi_hwmod = { }; /* + * 'rtcss' class + * + */ +static struct omap_hwmod_class_sysconfig dra7xx_rtcss_sysc = { + .sysc_offs = 0x0078, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class dra7xx_rtcss_hwmod_class = { + .name = "rtcss", + .sysc = &dra7xx_rtcss_sysc, +}; + +/* rtcss */ +static struct omap_hwmod dra7xx_rtcss_hwmod = { + .name = "rtcss", + .class = &dra7xx_rtcss_hwmod_class, + .clkdm_name = "rtc_clkdm", + .main_clk = "sys_32k_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_RTC_RTCSS_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_RTC_RTCSS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* * 'sata' class * */ @@ -2007,6 +2359,19 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if dra7xx_l4_per2__cpgmac0 = { + .master = &dra7xx_l4_per2_hwmod, + .slave = &dra7xx_gmac_hwmod, + .clk = "dpll_gmac_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if dra7xx_gmac__mdio = { + .master = &dra7xx_gmac_hwmod, + .slave = &dra7xx_mdio_hwmod, + .user = OCP_USER_MPU, +}; + /* l4_wkup -> dcan1 */ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = { .master = &dra7xx_l4_wkup_hwmod, @@ -2254,6 +2619,110 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_cfg -> mailbox1 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = { + .master = &dra7xx_l4_cfg_hwmod, + .slave = &dra7xx_mailbox1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox2 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox2 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox2_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox3 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox3 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox3_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox4 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox4 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox4_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox5 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox5 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox5_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox6 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox6 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox6_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox7 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox7 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox7_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox8 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox8 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox8_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox9 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox9 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox9_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox10 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox10 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox10_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox11 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox11 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox11_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox12 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox12 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox12_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per3 -> mailbox13 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__mailbox13 = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_mailbox13_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per1 -> mcspi1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi1 = { .master = &dra7xx_l4_per1_hwmod, @@ -2334,6 +2803,62 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_cfg -> ocp2scp3 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = { + .master = &dra7xx_l4_cfg_hwmod, + .slave = &dra7xx_ocp2scp3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> pcie1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_pcie1_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> pcie1 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = { + .master = &dra7xx_l4_cfg_hwmod, + .slave = &dra7xx_pcie1_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> pcie2 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_pcie2_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> pcie2 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = { + .master = &dra7xx_l4_cfg_hwmod, + .slave = &dra7xx_pcie2_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> pcie1 phy */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = { + .master = &dra7xx_l4_cfg_hwmod, + .slave = &dra7xx_pcie1_phy_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> pcie2 phy */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = { + .master = &dra7xx_l4_cfg_hwmod, + .slave = &dra7xx_pcie2_phy_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = { { .pa_start = 0x4b300000, @@ -2352,6 +2877,14 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per3 -> rtcss */ +static struct omap_hwmod_ocp_if dra7xx_l4_per3__rtcss = { + .master = &dra7xx_l4_per3_hwmod, + .slave = &dra7xx_rtcss_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_addr_space dra7xx_sata_addrs[] = { { .name = "sysc", @@ -2650,6 +3183,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_wkup__ctrl_module_wkup, &dra7xx_l4_wkup__dcan1, &dra7xx_l4_per2__dcan2, + &dra7xx_l4_per2__cpgmac0, + &dra7xx_gmac__mdio, &dra7xx_l4_cfg__dma_system, &dra7xx_l3_main_1__dss, &dra7xx_l3_main_1__dispc, @@ -2670,6 +3205,19 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per1__i2c3, &dra7xx_l4_per1__i2c4, &dra7xx_l4_per1__i2c5, + &dra7xx_l4_cfg__mailbox1, + &dra7xx_l4_per3__mailbox2, + &dra7xx_l4_per3__mailbox3, + &dra7xx_l4_per3__mailbox4, + &dra7xx_l4_per3__mailbox5, + &dra7xx_l4_per3__mailbox6, + &dra7xx_l4_per3__mailbox7, + &dra7xx_l4_per3__mailbox8, + &dra7xx_l4_per3__mailbox9, + &dra7xx_l4_per3__mailbox10, + &dra7xx_l4_per3__mailbox11, + &dra7xx_l4_per3__mailbox12, + &dra7xx_l4_per3__mailbox13, &dra7xx_l4_per1__mcspi1, &dra7xx_l4_per1__mcspi2, &dra7xx_l4_per1__mcspi3, @@ -2680,7 +3228,15 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per1__mmc4, &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, + &dra7xx_l4_cfg__ocp2scp3, + &dra7xx_l3_main_1__pcie1, + &dra7xx_l4_cfg__pcie1, + &dra7xx_l3_main_1__pcie2, + &dra7xx_l4_cfg__pcie2, + &dra7xx_l4_cfg__pcie1_phy, + &dra7xx_l4_cfg__pcie2_phy, &dra7xx_l3_main_1__qspi, + &dra7xx_l4_per3__rtcss, &dra7xx_l4_cfg__sata, &dra7xx_l4_cfg__smartreflex_core, &dra7xx_l4_cfg__smartreflex_mpu, diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 2c38c6b0ee03..11ed5a17dd77 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -33,7 +33,6 @@ extern struct omap_hwmod_addr_space omap2_mcspi1_addr_space[]; extern struct omap_hwmod_addr_space omap2_mcspi2_addr_space[]; extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[]; extern struct omap_hwmod_addr_space omap2_dma_system_addrs[]; -extern struct omap_hwmod_addr_space omap2_mailbox_addrs[]; extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[]; extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[]; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c new file mode 100644 index 000000000000..f21664da25a2 --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_common_ipblock_data.c @@ -0,0 +1,55 @@ +/* + * omap_hwmod_common_ipblock_data.c - common IP block data for OMAP2+ + * + * Copyright (C) 2011 Nokia Corporation + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap_hwmod.h" +#include "omap_hwmod_common_data.h" + +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dss_hwmod_class = { + .name = "dss", + .sysc = &omap2_dss_sysc, + .reset = omap_dss_reset, +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap2_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap2_rfbi_sysc, +}; + diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index d7ac05c6e5e2..fe01c5a03aa2 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -75,9 +75,9 @@ static int omap2_enter_full_retention(void) /* Clear old wake-up events */ /* REVISIT: These write to reserved bits? */ - omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); - omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); - omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); + omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); + omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0); pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET); pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); @@ -104,23 +104,18 @@ no_sleep: clk_enable(osc_ck); /* clear CORE wake-up events */ - omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); - omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); + omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); /* wakeup domain events - bit 1: GPT1, bit5 GPIO */ - omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST); + omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1); /* MPU domain wake events */ - l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); - if (l & 0x01) - omap2_prm_write_mod_reg(0x01, OCP_MOD, - OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); - if (l & 0x20) - omap2_prm_write_mod_reg(0x20, OCP_MOD, - OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, + 0x1); - /* Mask future PRCM-to-MPU interrupts */ - omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, + 0x20); pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON); @@ -148,9 +143,9 @@ static void omap2_enter_mpu_retention(void) * it is in retention mode. */ if (omap2_allow_mpu_retention()) { /* REVISIT: These write to reserved bits? */ - omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); - omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); - omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0); + omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0); + omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0); /* Try to enter MPU retention */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 507d8eeaab95..3f80929a5f7e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -133,60 +133,13 @@ static void omap3_save_secure_ram_context(void) } } -/* - * PRCM Interrupt Handler Helper Function - * - * The purpose of this function is to clear any wake-up events latched - * in the PRCM PM_WKST_x registers. It is possible that a wake-up event - * may occur whilst attempting to clear a PM_WKST_x register and thus - * set another bit in this register. A while loop is used to ensure - * that any peripheral wake-up events occurring while attempting to - * clear the PM_WKST_x are detected and cleared. - */ -static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits) -{ - u32 wkst, fclk, iclk, clken; - u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1; - u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1; - u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1; - u16 grpsel_off = (regs == 3) ? - OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL; - int c = 0; - - wkst = omap2_prm_read_mod_reg(module, wkst_off); - wkst &= omap2_prm_read_mod_reg(module, grpsel_off); - wkst &= ~ignore_bits; - if (wkst) { - iclk = omap2_cm_read_mod_reg(module, iclk_off); - fclk = omap2_cm_read_mod_reg(module, fclk_off); - while (wkst) { - clken = wkst; - omap2_cm_set_mod_reg_bits(clken, module, iclk_off); - /* - * For USBHOST, we don't know whether HOST1 or - * HOST2 woke us up, so enable both f-clocks - */ - if (module == OMAP3430ES2_USBHOST_MOD) - clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT; - omap2_cm_set_mod_reg_bits(clken, module, fclk_off); - omap2_prm_write_mod_reg(wkst, module, wkst_off); - wkst = omap2_prm_read_mod_reg(module, wkst_off); - wkst &= ~ignore_bits; - c++; - } - omap2_cm_write_mod_reg(iclk, module, iclk_off); - omap2_cm_write_mod_reg(fclk, module, fclk_off); - } - - return c; -} - static irqreturn_t _prcm_int_handle_io(int irq, void *unused) { int c; - c = prcm_clear_mod_irqs(WKUP_MOD, 1, - ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK)); + c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, + ~(OMAP3430_ST_IO_MASK | + OMAP3430_ST_IO_CHAIN_MASK)); return c ? IRQ_HANDLED : IRQ_NONE; } @@ -200,13 +153,14 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused) * these are handled in a separate handler to avoid acking * IO events before parsing in mux code */ - c = prcm_clear_mod_irqs(WKUP_MOD, 1, - OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK); - c += prcm_clear_mod_irqs(CORE_MOD, 1, 0); - c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0); + c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, + OMAP3430_ST_IO_MASK | + OMAP3430_ST_IO_CHAIN_MASK); + c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0); + c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0); if (omap_rev() > OMAP3430_REV_ES1_0) { - c += prcm_clear_mod_irqs(CORE_MOD, 3, 0); - c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0); + c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0); + c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0); } return c ? IRQ_HANDLED : IRQ_NONE; @@ -399,159 +353,11 @@ restore: #define omap3_pm_suspend NULL #endif /* CONFIG_SUSPEND */ - -/** - * omap3_iva_idle(): ensure IVA is in idle so it can be put into - * retention - * - * In cases where IVA2 is activated by bootcode, it may prevent - * full-chip retention or off-mode because it is not idle. This - * function forces the IVA2 into idle state so it can go - * into retention/off and thus allow full-chip retention/off. - * - **/ -static void __init omap3_iva_idle(void) -{ - /* ensure IVA2 clock is disabled */ - omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); - - /* if no clock activity, nothing else to do */ - if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) & - OMAP3430_CLKACTIVITY_IVA2_MASK)) - return; - - /* Reset IVA2 */ - omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK | - OMAP3430_RST2_IVA2_MASK | - OMAP3430_RST3_IVA2_MASK, - OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); - - /* Enable IVA2 clock */ - omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK, - OMAP3430_IVA2_MOD, CM_FCLKEN); - - /* Set IVA2 boot mode to 'idle' */ - omap3_ctrl_set_iva_bootmode_idle(); - - /* Un-reset IVA2 */ - omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); - - /* Disable IVA2 clock */ - omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); - - /* Reset IVA2 */ - omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK | - OMAP3430_RST2_IVA2_MASK | - OMAP3430_RST3_IVA2_MASK, - OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); -} - -static void __init omap3_d2d_idle(void) -{ - u16 mask, padconf; - - /* In a stand alone OMAP3430 where there is not a stacked - * modem for the D2D Idle Ack and D2D MStandby must be pulled - * high. S CONTROL_PADCONF_SAD2D_IDLEACK and - * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */ - mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ - padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); - padconf |= mask; - omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); - - padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); - padconf |= mask; - omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); - - /* reset modem */ - omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK | - OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK, - CORE_MOD, OMAP2_RM_RSTCTRL); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL); -} - static void __init prcm_setup_regs(void) { - u32 omap3630_en_uart4_mask = cpu_is_omap3630() ? - OMAP3630_EN_UART4_MASK : 0; - u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ? - OMAP3630_GRPSEL_UART4_MASK : 0; - - /* XXX This should be handled by hwmod code or SCM init code */ - omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG); - - /* - * Enable control of expternal oscillator through - * sys_clkreq. In the long run clock framework should - * take care of this. - */ - omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, - 1 << OMAP_AUTOEXTCLKMODE_SHIFT, - OMAP3430_GR_MOD, - OMAP3_PRM_CLKSRC_CTRL_OFFSET); - - /* setup wakup source */ - omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK | - OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK, - WKUP_MOD, PM_WKEN); - /* No need to write EN_IO, that is always enabled */ - omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK | - OMAP3430_GRPSEL_GPT1_MASK | - OMAP3430_GRPSEL_GPT12_MASK, - WKUP_MOD, OMAP3430_PM_MPUGRPSEL); - - /* Enable PM_WKEN to support DSS LPR */ - omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK, - OMAP3430_DSS_MOD, PM_WKEN); - - /* Enable wakeups in PER */ - omap2_prm_write_mod_reg(omap3630_en_uart4_mask | - OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | - OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK | - OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK | - OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK | - OMAP3430_EN_MCBSP4_MASK, - OMAP3430_PER_MOD, PM_WKEN); - /* and allow them to wake up MPU */ - omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask | - OMAP3430_GRPSEL_GPIO2_MASK | - OMAP3430_GRPSEL_GPIO3_MASK | - OMAP3430_GRPSEL_GPIO4_MASK | - OMAP3430_GRPSEL_GPIO5_MASK | - OMAP3430_GRPSEL_GPIO6_MASK | - OMAP3430_GRPSEL_UART3_MASK | - OMAP3430_GRPSEL_MCBSP2_MASK | - OMAP3430_GRPSEL_MCBSP3_MASK | - OMAP3430_GRPSEL_MCBSP4_MASK, - OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); - - /* Don't attach IVA interrupts */ - if (omap3_has_iva()) { - omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); - omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); - omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, - OMAP3430_PM_IVAGRPSEL); - } - - /* Clear any pending 'reset' flags */ - omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST); - omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST); - omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST); - omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST); - omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST); - omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST); - omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST); - - /* Clear any pending PRCM interrupts */ - omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - - /* - * We need to idle iva2_pwrdm even on am3703 with no iva2. - */ - omap3_iva_idle(); + omap3_ctrl_init(); - omap3_d2d_idle(); + omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva()); } void omap3_pm_off_mode_enable(int enable) diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index 7785be984edd..ad7b3e9977f8 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -142,5 +142,6 @@ #define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8 #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268 #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0 +#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20 #endif diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index a3a3cca2bcc4..86958050547a 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -114,6 +114,24 @@ void omap2xxx_prm_dpll_reset(void) omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL); } +/** + * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module + * @module: PRM module to clear wakeups from + * @regs: register offset to clear + * @wkst_mask: wakeup status mask to clear + * + * Clears wakeup status bits for a given module, so that the device can + * re-enter idle. + */ +void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask) +{ + u32 wkst; + + wkst = omap2_prm_read_mod_reg(module, regs); + wkst &= wkst_mask; + omap2_prm_write_mod_reg(wkst, module, regs); +} + int omap2xxx_clkdm_sleep(struct clockdomain *clkdm) { omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index d2cb6365716f..d73414139292 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -125,6 +125,7 @@ extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); extern void omap2xxx_prm_dpll_reset(void); +void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask); extern int __init omap2xxx_prm_init(void); diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 4bd7a2dca8af..2458be6fc67b 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -26,6 +26,8 @@ #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-34xx.h" +#include "cm3xxx.h" +#include "cm-regbits-34xx.h" static const struct omap_prcm_irq omap3_prcm_irqs[] = { OMAP_PRCM_IRQ("wkup", 0, 0), @@ -206,6 +208,167 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) } /** + * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt + * @module: PRM module to clear wakeups from + * @regs: register set to clear, 1 or 3 + * @ignore_bits: wakeup status bits to ignore + * + * The purpose of this function is to clear any wake-up events latched + * in the PRCM PM_WKST_x registers. It is possible that a wake-up event + * may occur whilst attempting to clear a PM_WKST_x register and thus + * set another bit in this register. A while loop is used to ensure + * that any peripheral wake-up events occurring while attempting to + * clear the PM_WKST_x are detected and cleared. + */ +int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits) +{ + u32 wkst, fclk, iclk, clken; + u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1; + u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1; + u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1; + u16 grpsel_off = (regs == 3) ? + OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL; + int c = 0; + + wkst = omap2_prm_read_mod_reg(module, wkst_off); + wkst &= omap2_prm_read_mod_reg(module, grpsel_off); + wkst &= ~ignore_bits; + if (wkst) { + iclk = omap2_cm_read_mod_reg(module, iclk_off); + fclk = omap2_cm_read_mod_reg(module, fclk_off); + while (wkst) { + clken = wkst; + omap2_cm_set_mod_reg_bits(clken, module, iclk_off); + /* + * For USBHOST, we don't know whether HOST1 or + * HOST2 woke us up, so enable both f-clocks + */ + if (module == OMAP3430ES2_USBHOST_MOD) + clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT; + omap2_cm_set_mod_reg_bits(clken, module, fclk_off); + omap2_prm_write_mod_reg(wkst, module, wkst_off); + wkst = omap2_prm_read_mod_reg(module, wkst_off); + wkst &= ~ignore_bits; + c++; + } + omap2_cm_write_mod_reg(iclk, module, iclk_off); + omap2_cm_write_mod_reg(fclk, module, fclk_off); + } + + return c; +} + +/** + * omap3_prm_reset_modem - toggle reset signal for modem + * + * Toggles the reset signal to modem IP block. Required to allow + * OMAP3430 without stacked modem to idle properly. + */ +void __init omap3_prm_reset_modem(void) +{ + omap2_prm_write_mod_reg( + OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK | + OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK, + CORE_MOD, OMAP2_RM_RSTCTRL); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL); +} + +/** + * omap3_prm_init_pm - initialize PM related registers for PRM + * @has_uart4: SoC has UART4 + * @has_iva: SoC has IVA + * + * Initializes PRM registers for PM use. Called from PM init. + */ +void __init omap3_prm_init_pm(bool has_uart4, bool has_iva) +{ + u32 en_uart4_mask; + u32 grpsel_uart4_mask; + + /* + * Enable control of expternal oscillator through + * sys_clkreq. In the long run clock framework should + * take care of this. + */ + omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, + 1 << OMAP_AUTOEXTCLKMODE_SHIFT, + OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + + /* setup wakup source */ + omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK | + OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK, + WKUP_MOD, PM_WKEN); + /* No need to write EN_IO, that is always enabled */ + omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK | + OMAP3430_GRPSEL_GPT1_MASK | + OMAP3430_GRPSEL_GPT12_MASK, + WKUP_MOD, OMAP3430_PM_MPUGRPSEL); + + /* Enable PM_WKEN to support DSS LPR */ + omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK, + OMAP3430_DSS_MOD, PM_WKEN); + + if (has_uart4) { + en_uart4_mask = OMAP3630_EN_UART4_MASK; + grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK; + } + + /* Enable wakeups in PER */ + omap2_prm_write_mod_reg(en_uart4_mask | + OMAP3430_EN_GPIO2_MASK | + OMAP3430_EN_GPIO3_MASK | + OMAP3430_EN_GPIO4_MASK | + OMAP3430_EN_GPIO5_MASK | + OMAP3430_EN_GPIO6_MASK | + OMAP3430_EN_UART3_MASK | + OMAP3430_EN_MCBSP2_MASK | + OMAP3430_EN_MCBSP3_MASK | + OMAP3430_EN_MCBSP4_MASK, + OMAP3430_PER_MOD, PM_WKEN); + + /* and allow them to wake up MPU */ + omap2_prm_write_mod_reg(grpsel_uart4_mask | + OMAP3430_GRPSEL_GPIO2_MASK | + OMAP3430_GRPSEL_GPIO3_MASK | + OMAP3430_GRPSEL_GPIO4_MASK | + OMAP3430_GRPSEL_GPIO5_MASK | + OMAP3430_GRPSEL_GPIO6_MASK | + OMAP3430_GRPSEL_UART3_MASK | + OMAP3430_GRPSEL_MCBSP2_MASK | + OMAP3430_GRPSEL_MCBSP3_MASK | + OMAP3430_GRPSEL_MCBSP4_MASK, + OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); + + /* Don't attach IVA interrupts */ + if (has_iva) { + omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, + OMAP3430_PM_IVAGRPSEL); + } + + /* Clear any pending 'reset' flags */ + omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST); + omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, + OMAP2_RM_RSTST); + + /* Clear any pending PRCM interrupts */ + omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + /* We need to idle iva2_pwrdm even on am3703 with no iva2. */ + omap3xxx_prm_iva_idle(); + + omap3_prm_reset_modem(); +} + +/** * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain * * Clear any previously-latched I/O wakeup events and ensure that the @@ -276,6 +439,76 @@ static u32 omap3xxx_prm_read_reset_sources(void) return r; } +/** + * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention + * + * In cases where IVA2 is activated by bootcode, it may prevent + * full-chip retention or off-mode because it is not idle. This + * function forces the IVA2 into idle state so it can go + * into retention/off and thus allow full-chip retention/off. + */ +void omap3xxx_prm_iva_idle(void) +{ + /* ensure IVA2 clock is disabled */ + omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* if no clock activity, nothing else to do */ + if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) & + OMAP3430_CLKACTIVITY_IVA2_MASK)) + return; + + /* Reset IVA2 */ + omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK | + OMAP3430_RST2_IVA2_MASK | + OMAP3430_RST3_IVA2_MASK, + OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); + + /* Enable IVA2 clock */ + omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK, + OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Un-reset IVA2 */ + omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); + + /* Disable IVA2 clock */ + omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Reset IVA2 */ + omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK | + OMAP3430_RST2_IVA2_MASK | + OMAP3430_RST3_IVA2_MASK, + OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); +} + +/** + * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status + * and clears it if asserted + * + * Checks if cold-reset has occurred and clears the status bit if yes. Returns + * 1 if cold-reset has occurred, 0 otherwise. + */ +int omap3xxx_prm_clear_global_cold_reset(void) +{ + if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & + OMAP3430_GLOBAL_COLD_RST_MASK) { + omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK, + OMAP3430_GR_MOD, + OMAP3_PRM_RSTST_OFFSET); + return 1; + } + + return 0; +} + +void omap3_prm_save_scratchpad_contents(u32 *ptr) +{ + *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + + *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD, + OMAP3_PRM_CLKSEL_OFFSET); +} + /* Powerdomain low-level functions */ static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index 1dacfc5b1959..bc37d42a8704 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -162,6 +162,12 @@ extern void omap3xxx_prm_dpll3_reset(void); extern int __init omap3xxx_prm_init(void); extern u32 omap3xxx_prm_get_reset_sources(void); +int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits); +void omap3xxx_prm_iva_idle(void); +void omap3_prm_reset_modem(void); +int omap3xxx_prm_clear_global_cold_reset(void); +void omap3_prm_save_scratchpad_contents(u32 *ptr); +void omap3_prm_init_pm(bool has_uart4, bool has_iva); #endif /* __ASSEMBLER */ diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h index d92a8404edc7..4bb50fbf29be 100644 --- a/arch/arm/mach-omap2/prm7xx.h +++ b/arch/arm/mach-omap2/prm7xx.h @@ -374,6 +374,10 @@ #define DRA7XX_RM_L3INIT_IEEE1500_2_OCP_CONTEXT_OFFSET 0x007c #define DRA7XX_PM_L3INIT_SATA_WKDEP_OFFSET 0x0088 #define DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET 0x008c +#define DRA7XX_PM_L3INIT_PCIESS1_WKDEP_OFFSET 0x00b0 +#define DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET 0x00b4 +#define DRA7XX_PM_L3INIT_PCIESS2_WKDEP_OFFSET 0x00b8 +#define DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET 0x00bc #define DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET 0x00d4 #define DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET 0x00e4 #define DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET 0x00ec diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9086ce03ae12..b84a0122d823 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -10,6 +10,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/smp_scu.h> #include <asm/memory.h> #include <asm/hardware/cache-l2x0.h> @@ -334,7 +335,7 @@ ENDPROC(omap4_cpu_resume) #ifndef CONFIG_OMAP4_ERRATA_I688 ENTRY(omap_bus_sync) - mov pc, lr + ret lr ENDPROC(omap_bus_sync) #endif diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 680a7c56cc3e..2c88ff2d0236 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -101,7 +101,7 @@ i_dll_wait: i_dll_delay: subs r4, r4, #0x1 bne i_dll_delay - mov pc, lr + ret lr /* * shift up or down voltage, use R9 as input to tell level. @@ -125,7 +125,7 @@ volt_delay: ldr r7, [r3] @ get timer value cmp r5, r7 @ time up? bhi volt_delay @ not yet->branch - mov pc, lr @ back to caller. + ret lr @ back to caller. omap242x_sdi_cm_clksel2_pll: .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2) @@ -220,7 +220,7 @@ volt_delay_c: ldr r7, [r10] @ get timer value cmp r8, r7 @ time up? bhi volt_delay_c @ not yet->branch - mov pc, lr @ back to caller + ret lr @ back to caller omap242x_srs_cm_clksel2_pll: .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2) diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index a1e9edd673f4..d5deb9761fc7 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -101,7 +101,7 @@ i_dll_wait: i_dll_delay: subs r4, r4, #0x1 bne i_dll_delay - mov pc, lr + ret lr /* * shift up or down voltage, use R9 as input to tell level. @@ -125,7 +125,7 @@ volt_delay: ldr r7, [r3] @ get timer value cmp r5, r7 @ time up? bhi volt_delay @ not yet->branch - mov pc, lr @ back to caller. + ret lr @ back to caller. omap243x_sdi_cm_clksel2_pll: .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2) @@ -220,7 +220,7 @@ volt_delay_c: ldr r7, [r10] @ get timer value cmp r8, r7 @ time up? bhi volt_delay_c @ not yet->branch - mov pc, lr @ back to caller + ret lr @ back to caller omap243x_srs_cm_clksel2_pll: .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2) diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index e832bc7b8e2d..8333400898fb 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -95,7 +95,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) dev_t.t_avdp_w = t_scsnh_advnh; dev_t.cyc_aavdh_we = 3; dev_t.cyc_wpl = 6; - dev_t.t_ce_rdyz = 7000; gpmc_calc_timings(&t, &tusb_sync, &dev_t); diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 648867a8caa8..2fe1824c6dcb 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -4,7 +4,7 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o \ - time.o reset.o + reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o # Generic drivers that other drivers may depend upon diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 91dd1c7cdbcd..06022b235730 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -514,7 +514,7 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; -#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER) +#if IS_ENABLED(CONFIG_SPI_PXA2XX) static struct pxa2xx_spi_master corgi_spi_info = { .num_chipselect = 3, }; diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 42254175fcf4..630fa916bbc6 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -25,11 +25,13 @@ #include <asm/mach/map.h> #include <asm/mach-types.h> +#include <mach/irqs.h> #include <mach/reset.h> #include <mach/smemc.h> #include <mach/pxa3xx-regs.h> #include "generic.h" +#include <clocksource/pxa.h> void clear_reset_status(unsigned int mask) { @@ -57,6 +59,15 @@ unsigned long get_clock_tick_rate(void) EXPORT_SYMBOL(get_clock_tick_rate); /* + * For non device-tree builds, keep legacy timer init + */ +void pxa_timer_init(void) +{ + pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000), + get_clock_tick_rate()); +} + +/* * Get the clock frequency as reflected by CCCR and the turbo flag. * We assume these values have been applied via a fcs. * If info is not 0 we also display the current settings. @@ -79,19 +90,15 @@ EXPORT_SYMBOL(get_clk_frequency_khz); */ static struct map_desc common_io_desc[] __initdata = { { /* Devs */ - .virtual = 0xf2000000, - .pfn = __phys_to_pfn(0x40000000), - .length = 0x02000000, - .type = MT_DEVICE - }, { /* UNCACHED_PHYS_0 */ - .virtual = 0xff000000, - .pfn = __phys_to_pfn(0x00000000), - .length = 0x00100000, + .virtual = (unsigned long)PERIPH_VIRT, + .pfn = __phys_to_pfn(PERIPH_PHYS), + .length = PERIPH_SIZE, .type = MT_DEVICE } }; void __init pxa_map_io(void) { + debug_ll_io_init(); iotable_init(ARRAY_AND_SIZE(common_io_desc)); } diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index ccb06e485520..8d63c211b22f 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -19,8 +19,8 @@ * Workarounds for at least 2 errata so far require this. * The mapping is set in mach-pxa/generic.c. */ -#define UNCACHED_PHYS_0 0xff000000 -#define UNCACHED_ADDR UNCACHED_PHYS_0 +#define UNCACHED_PHYS_0 0xfe000000 +#define UNCACHED_PHYS_0_SIZE 0x00100000 /* * Intel PXA2xx internal register mapping: diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S index 324d25a48c85..81591491ab94 100644 --- a/arch/arm/mach-pxa/mioa701_bootresume.S +++ b/arch/arm/mach-pxa/mioa701_bootresume.S @@ -29,7 +29,7 @@ ENTRY(mioa701_jumpaddr) str r1, [r0] @ Early disable resume for next boot ldr r0, mioa701_jumpaddr @ (Murphy's Law) ldr r0, [r0] - mov pc, r0 + ret r0 2: ENTRY(mioa701_bootstrap_lg) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index f2c28972084d..66e4a2b6316e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -331,7 +331,12 @@ static struct map_desc pxa25x_io_desc[] __initdata = { { /* Mem Ctl */ .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE), - .length = 0x00200000, + .length = SMEMC_SIZE, + .type = MT_DEVICE + }, { /* UNCACHED_PHYS_0 */ + .virtual = UNCACHED_PHYS_0, + .pfn = __phys_to_pfn(0x00000000), + .length = UNCACHED_PHYS_0_SIZE, .type = MT_DEVICE }, }; diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 301471a07a10..b040d7d14888 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -402,12 +402,12 @@ static struct map_desc pxa27x_io_desc[] __initdata = { { /* Mem Ctl */ .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE), - .length = 0x00200000, + .length = SMEMC_SIZE, .type = MT_DEVICE - }, { /* IMem ctl */ - .virtual = 0xfe000000, - .pfn = __phys_to_pfn(0x58000000), - .length = 0x00100000, + }, { /* UNCACHED_PHYS_0 */ + .virtual = UNCACHED_PHYS_0, + .pfn = __phys_to_pfn(0x00000000), + .length = UNCACHED_PHYS_0_SIZE, .type = MT_DEVICE }, }; diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 87011f3de69d..593ccd35ca97 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -416,7 +416,7 @@ static struct map_desc pxa3xx_io_desc[] __initdata = { { /* Mem Ctl */ .virtual = (unsigned long)SMEMC_VIRT, .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE), - .length = 0x00200000, + .length = SMEMC_SIZE, .type = MT_DEVICE } }; diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 1e544be9905d..6c5b3ffd2cd3 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -157,7 +157,7 @@ pxa_cpu_do_suspend: @ Do not reorder... @ Intel PXA270 Specification Update notes problems performing @ external accesses after SDRAM is put in self-refresh mode - @ (see Errata 39 ...hangs when entering self-refresh mode) + @ (see Errata 38 ...hangs when entering self-refresh mode) @ force address lines low by reading at physical address 0 ldr r3, [r2] diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 29f5f5c180b7..eab1645bb4ad 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -29,7 +29,7 @@ ENTRY(pxa_cpu_standby) .align 5 1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby str r1, [r0] @ make sure PSSR_PH/STS are clear - mov pc, lr + ret lr #endif @@ -108,7 +108,7 @@ ENTRY(pm_enter_standby_start) bic r0, r0, #0x20000000 str r0, [r1, #PXA3_DMCIER] - mov pc, lr + ret lr ENTRY(pm_enter_standby_end) #endif diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c deleted file mode 100644 index fca174e3865d..000000000000 --- a/arch/arm/mach-pxa/time.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * arch/arm/mach-pxa/time.c - * - * PXA clocksource, clockevents, and OST interrupt handlers. - * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>. - * - * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001 - * by MontaVista Software, Inc. (Nico, your code rocks!) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/sched_clock.h> - -#include <asm/div64.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <mach/regs-ost.h> -#include <mach/irqs.h> - -/* - * This is PXA's sched_clock implementation. This has a resolution - * of at least 308 ns and a maximum value of 208 days. - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 582 seconds between successive - * calls to sched_clock() which should always be the case in practice. - */ - -static u64 notrace pxa_read_sched_clock(void) -{ - return readl_relaxed(OSCR); -} - - -#define MIN_OSCR_DELTA 16 - -static irqreturn_t -pxa_ost0_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *c = dev_id; - - /* Disarm the compare/match, signal the event. */ - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - c->event_handler(c); - - return IRQ_HANDLED; -} - -static int -pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) -{ - unsigned long next, oscr; - - writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER); - next = readl_relaxed(OSCR) + delta; - writel_relaxed(next, OSMR0); - oscr = readl_relaxed(OSCR); - - return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; -} - -static void -pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - /* initializing, released, or preparing for suspend */ - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - break; - - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - } -} - -#ifdef CONFIG_PM -static unsigned long osmr[4], oier, oscr; - -static void pxa_timer_suspend(struct clock_event_device *cedev) -{ - osmr[0] = readl_relaxed(OSMR0); - osmr[1] = readl_relaxed(OSMR1); - osmr[2] = readl_relaxed(OSMR2); - osmr[3] = readl_relaxed(OSMR3); - oier = readl_relaxed(OIER); - oscr = readl_relaxed(OSCR); -} - -static void pxa_timer_resume(struct clock_event_device *cedev) -{ - /* - * Ensure that we have at least MIN_OSCR_DELTA between match - * register 0 and the OSCR, to guarantee that we will receive - * the one-shot timer interrupt. We adjust OSMR0 in preference - * to OSCR to guarantee that OSCR is monotonically incrementing. - */ - if (osmr[0] - oscr < MIN_OSCR_DELTA) - osmr[0] += MIN_OSCR_DELTA; - - writel_relaxed(osmr[0], OSMR0); - writel_relaxed(osmr[1], OSMR1); - writel_relaxed(osmr[2], OSMR2); - writel_relaxed(osmr[3], OSMR3); - writel_relaxed(oier, OIER); - writel_relaxed(oscr, OSCR); -} -#else -#define pxa_timer_suspend NULL -#define pxa_timer_resume NULL -#endif - -static struct clock_event_device ckevt_pxa_osmr0 = { - .name = "osmr0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = pxa_osmr0_set_next_event, - .set_mode = pxa_osmr0_set_mode, - .suspend = pxa_timer_suspend, - .resume = pxa_timer_resume, -}; - -static struct irqaction pxa_ost0_irq = { - .name = "ost0", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = pxa_ost0_interrupt, - .dev_id = &ckevt_pxa_osmr0, -}; - -void __init pxa_timer_init(void) -{ - unsigned long clock_tick_rate = get_clock_tick_rate(); - - writel_relaxed(0, OIER); - writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); - - sched_clock_register(pxa_read_sched_clock, 32, clock_tick_rate); - - ckevt_pxa_osmr0.cpumask = cpumask_of(0); - - setup_irq(IRQ_OST0, &pxa_ost0_irq); - - clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32, - clocksource_mmio_readl_up); - clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate, - MIN_OSCR_DELTA * 2, 0x7fffffff); -} diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 8c1b39a0caa0..850e506926df 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -25,6 +25,7 @@ #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <linux/platform_data/video-clcd-versatile.h> #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/ata_platform.h> @@ -48,7 +49,6 @@ #include <mach/irqs.h> #include <asm/hardware/timer-sp.h> -#include <plat/clcd.h> #include <plat/sched_clock.h> #include "core.h" diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index db09170e3832..23e7a313f75d 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -20,15 +20,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -/* - * Physical DRAM offset. - */ -#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET -#define PLAT_PHYS_OFFSET UL(0x70000000) -#else -#define PLAT_PHYS_OFFSET UL(0x00000000) -#endif - #ifdef CONFIG_SPARSEMEM /* diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 4377a1436a98..b29d8ead4cf2 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -1,2 +1,4 @@ +CFLAGS_platsmp.o := -march=armv7-a + obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 910835d4ccf4..189684f55927 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -21,6 +21,7 @@ #include <linux/of_address.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_scu.h> #include <asm/smp_plat.h> #include <asm/mach/map.h> @@ -178,8 +179,27 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) pmu_set_power_domain(0 + i, false); } +#ifdef CONFIG_HOTPLUG_CPU +static int rockchip_cpu_kill(unsigned int cpu) +{ + pmu_set_power_domain(0 + cpu, false); + return 1; +} + +static void rockchip_cpu_die(unsigned int cpu) +{ + v7_exit_coherency_flush(louis); + while(1) + cpu_do_idle(); +} +#endif + static struct smp_operations rockchip_smp_ops __initdata = { .smp_prepare_cpus = rockchip_smp_prepare_cpus, .smp_boot_secondary = rockchip_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = rockchip_cpu_kill, + .cpu_die = rockchip_cpu_die, +#endif }; CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops); diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h index 18a221093bf5..b7e49571417d 100644 --- a/arch/arm/mach-rpc/include/mach/memory.h +++ b/arch/arm/mach-rpc/include/mach/memory.h @@ -19,11 +19,6 @@ #define __ASM_ARCH_MEMORY_H /* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET UL(0x10000000) - -/* * Cache flushing area - ROM */ #define FLUSH_BASE_PHYS 0x00000000 diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index c0763b837745..44fa95df9262 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -49,9 +49,7 @@ #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/clock.h> #include <plat/cpu-freq.h> -#include <plat/pll.h> #include <plat/pwm-core.h> #include <plat/watchdog-reset.h> diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c index bd064c05c473..28b13951de87 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c @@ -29,7 +29,6 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> -#include <plat/clock.h> #include <mach/s3c2412.h> diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index fbf5487ae5d1..c9a99bbad545 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -60,7 +60,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <plat/pll.h> #include <plat/pm.h> #include <plat/samsung-time.h> @@ -73,6 +72,10 @@ #define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END)) +#define S3C24XX_PLL_MDIV_SHIFT (12) +#define S3C24XX_PLL_PDIV_SHIFT (4) +#define S3C24XX_PLL_SDIV_SHIFT (0) + static struct map_desc h1940_iodesc[] __initdata = { [0] = { .virtual = (unsigned long)H1940_LATCH, diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index e81ea82c55f9..e647b47244a9 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -48,7 +48,6 @@ #include <linux/mtd/partitions.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index fb3b80e44595..10726bf84920 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -43,7 +43,6 @@ #include <mach/gpio-samsung.h> #include <mach/fb.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index fa6f30d23601..24189e8e8560 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -44,7 +44,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mtd-nand-s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index ef5d5ea33182..0ed77614dcfe 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -38,7 +38,6 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 9104c2be36c9..9d4f64750698 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -42,7 +42,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 7eab88829883..5ffe828cd659 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -41,8 +41,6 @@ #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/clock.h> -#include <plat/pll.h> #include <plat/pm.h> #include <plat/watchdog-reset.h> @@ -83,10 +81,6 @@ void __init s3c2410_map_io(void) iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); } -void __init_or_cpufreq s3c2410_setup_clocks(void) -{ -} - struct bus_type s3c2410_subsys = { .name = "s3c2410-core", .dev_name = "s3c2410-core", diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index d49f52fbc842..569f3f5a6c71 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -37,12 +37,10 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> #include <plat/nand-core.h> -#include <plat/pll.h> #include <plat/pm.h> #include <plat/regs-spi.h> @@ -171,10 +169,6 @@ void __init s3c2412_map_io(void) iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); } -void __init_or_cpufreq s3c2412_setup_clocks(void) -{ -} - /* need to register the subsystem before we actually register the device, and * we also need to ensure that it has been initialised before any of the * drivers even try to use it (even if not on an s3c2412 based system) diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index fb9da2b603a2..7b043349f1c8 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -43,7 +43,6 @@ #include <mach/regs-clock.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/pm.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 4a64bcc9eb51..d1c3e65785a1 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -38,11 +38,9 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <plat/pll.h> #include <plat/nand-core.h> #include <plat/watchdog-reset.h> @@ -78,10 +76,6 @@ void __init s3c244x_map_io(void) s3c2410_device_dclk.name = "s3c2440-dclk"; } -void __init_or_cpufreq s3c244x_setup_clocks(void) -{ -} - /* Since the S3C2442 and S3C2440 share items, put both subsystems here */ struct bus_type s3c2440_subsys = { diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index c9b91223697c..875ba8911127 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -66,4 +66,4 @@ s3c2410_do_sleep: streq r8, [r5] @ SDRAM power-down config streq r9, [r6] @ CPU sleep 1: beq 1b - mov pc, r14 + ret lr diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index 5adaceb7da13..6bf5b4d8743c 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S @@ -65,4 +65,4 @@ s3c2412_sleep_enter1: strne r9, [r3] bne s3c2412_sleep_enter1 - mov pc, r14 + ret lr diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 55eb6a69655b..60576dfbea8d 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -45,7 +45,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 4b0199fff9f5..fe116334afda 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -58,7 +58,6 @@ #include <linux/platform_data/spi-s3c64xx.h> #include <plat/keypad.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/adc.h> diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 72cee08c8bf5..19e8feb908fd 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -39,7 +39,6 @@ #include <plat/fb.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 67f06a9ae656..4bae7dc49eea 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -40,7 +40,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 78dd6f73c072..b3d13537a7f0 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -28,7 +28,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/i2c-s3c2410.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index c85d1cbe769f..910749768340 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index c6a8b2ab0240..1dc86d76b530 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -63,7 +63,6 @@ #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/adc.h> diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 8c42807bf579..1ce48c54cd9c 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -39,7 +39,6 @@ #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/clock.h> #include <plat/sdhci.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 5be3f09bac92..b2a7930548d9 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -40,7 +40,6 @@ #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/clock.h> #include <plat/sdhci.h> #include <plat/ata-core.h> #include <plat/adc-core.h> diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig deleted file mode 100644 index 26003e23796d..000000000000 --- a/arch/arm/mach-s5p64x0/Kconfig +++ /dev/null @@ -1,102 +0,0 @@ -# arch/arm/mach-s5p64x0/Kconfig -# -# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -if ARCH_S5P64X0 - -config CPU_S5P6440 - bool - select ARM_AMBA - select PL330_DMA if DMADEVICES - select S5P_SLEEP if PM - select SAMSUNG_WAKEMASK if PM - help - Enable S5P6440 CPU support - -config CPU_S5P6450 - bool - select ARM_AMBA - select PL330_DMA if DMADEVICES - select S5P_SLEEP if PM - select SAMSUNG_WAKEMASK if PM - help - Enable S5P6450 CPU support - -config S5P64X0_SETUP_FB_24BPP - bool - help - Common setup code for S5P64X0 based boards with a LCD display - through RGB interface. - -config S5P64X0_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S5P64X0_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations - -config S5P64X0_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -# machine support - -config MACH_SMDK6440 - bool "SMDK6440" - select CPU_S5P6440 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5P64X0_SETUP_FB_24BPP - select S5P64X0_SETUP_I2C1 - select S5P64X0_SETUP_SDHCI_GPIO - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDK6440 - -config MACH_SMDK6450 - bool "SMDK6450" - select CPU_S5P6450 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5P64X0_SETUP_FB_24BPP - select S5P64X0_SETUP_I2C1 - select S5P64X0_SETUP_SDHCI_GPIO - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDK6450 - -menu "Use 8-bit SDHCI bus width" - -config S5P64X0_SD_CH1_8BIT - bool "SDHCI Channel 1 (Slot 1)" - depends on MACH_SMDK6450 || MACH_SMDK6440 - help - Support SDHCI Channel 1 8-bit bus. - If selected, Channel 2 is disabled. - -endmenu - -endif diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile deleted file mode 100644 index 12bb951187a4..000000000000 --- a/arch/arm/mach-s5p64x0/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# arch/arm/mach-s5p64x0/Makefile -# -# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core - -obj-y += common.o clock.o -obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o -obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o - -obj-$(CONFIG_PM) += pm.o irq-pm.o - -obj-y += dma.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o -obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o - -# device support - -obj-y += dev-audio.o - -obj-y += setup-i2c0.o -obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o -obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5p64x0/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot deleted file mode 100644 index 79ece4055b02..000000000000 --- a/arch/arm/mach-s5p64x0/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c deleted file mode 100644 index ae34a1d5e10a..000000000000 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ /dev/null @@ -1,632 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P6440 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> - -#include "clock.h" -#include "common.h" - -static u32 epll_div[][5] = { - { 36000000, 0, 48, 1, 4 }, - { 48000000, 0, 32, 1, 3 }, - { 60000000, 0, 40, 1, 3 }, - { 72000000, 0, 48, 1, 3 }, - { 84000000, 0, 28, 1, 2 }, - { 96000000, 0, 32, 1, 2 }, - { 32768000, 45264, 43, 1, 4 }, - { 45158000, 6903, 30, 1, 3 }, - { 49152000, 50332, 32, 1, 3 }, - { 67738000, 10398, 45, 1, 3 }, - { 73728000, 9961, 49, 1, 3 } -}; - -static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P64X0_EPLL_CON); - epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); - - epll_con_k &= ~(PLL90XX_KDIV_MASK); - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P64X0_EPLL_CON); - __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); - - printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", - clk->rate, rate); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5p6440_epll_ops = { - .get_rate = s5p_epll_get_rate, - .set_rate = s5p6440_epll_set_rate, -}; - -static struct clksrc_clk clk_hclk = { - .clk = { - .name = "clk_hclk", - .parent = &clk_armclk.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk = { - .clk = { - .name = "clk_pclk", - .parent = &clk_hclk.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, -}; -static struct clksrc_clk clk_hclk_low = { - .clk = { - .name = "clk_hclk_low", - }, - .sources = &clkset_hclk_low, - .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_low = { - .clk = { - .name = "clk_pclk_low", - .parent = &clk_hclk_low.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, -}; - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_hclk.clk, - .enable = s5p64x0_mem_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "post", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 5) - }, { - .name = "2d", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "dma", - .devname = "dma-pl330", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "otg", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 20) - }, { - .name = "irom", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "lcd", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk1_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "hclk_fimgvg", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk1_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "tsi", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "watchdog", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "rtc", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "timers", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "pcm", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "adc", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "s5p64x0-spi.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "spi", - .devname = "s5p64x0-spi.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "gps", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "dsim", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "etm", - .parent = &clk_pclk.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 29), - }, { - .name = "dmc0", - .parent = &clk_pclk.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 30), - }, { - .name = "pclk_fimgvg", - .parent = &clk_pclk.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 31), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.0", - .parent = &clk_48m, - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.1", - .parent = &clk_48m, - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.2", - .parent = &clk_48m, - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 29), - }, -}; - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "intc", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "mem", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "gpio", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 18), - }, -}; - -static struct clk clk_iis_cd_v40 = { - .name = "iis_cdclk_v40", -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", -}; - -static struct clk *clkset_group1_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_group1 = { - .sources = clkset_group1_list, - .nr_sources = ARRAY_SIZE(clkset_group1_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_audio_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio = { - .sources = clkset_audio_list, - .nr_sources = ARRAY_SIZE(clkset_audio_list), -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_post", - .ctrlbit = (1 << 10), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_dispcon", - .ctrlbit = (1 << 1), - .enable = s5p64x0_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimgvg", - .ctrlbit = (1 << 2), - .enable = s5p64x0_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, - }, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 24), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 25), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 26), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uclk = { - .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 26), -}; - -static struct clksrc_clk clk_audio_bus2 = { - .clk = { - .name = "sclk_audio2", - .devname = "samsung-i2s.0", - .ctrlbit = (1 << 11), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_audio, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "s5p64x0-spi.0", - .ctrlbit = (1 << 20), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "s5p64x0-spi.1", - .ctrlbit = (1 << 21), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, -}; - -/* Clock initialization code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_dout_mpll, - &clk_armclk, - &clk_hclk, - &clk_pclk, - &clk_hclk_low, - &clk_pclk_low, -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -static struct clk *clk_cdev[] = { - &clk_i2s0, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uclk, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_audio_bus2, -}; - -static struct clk_lookup s5p6440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus2.clk), -}; - -void __init_or_cpufreq s5p6440_setup_clocks(void) -{ - struct clk *xtal_clk; - - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk_low; - unsigned long pclk; - unsigned long pclk_low; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned int ptr; - - /* Set S5P6440 functions for clk_fout_epll */ - - clk_fout_epll.enable = s5p_epll_enable; - clk_fout_epll.ops = &s5p6440_epll_ops; - - clk_48m.enable = s5p64x0_clk48m_ctrl; - - xtal_clk = clk_get(NULL, "ext_xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), - __raw_readl(S5P64X0_EPLL_CON_K)); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - - printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ - " E=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll)); - - fclk = clk_get_rate(&clk_armclk.clk); - hclk = clk_get_rate(&clk_hclk.clk); - pclk = clk_get_rate(&clk_pclk.clk); - hclk_low = clk_get_rate(&clk_hclk_low.clk); - pclk_low = clk_get_rate(&clk_pclk_low.clk); - - printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", - print_mhz(hclk), print_mhz(hclk_low), - print_mhz(pclk), print_mhz(pclk_low)); - - clk_f.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -void __init s5p6440_register_clocks(void) -{ - int ptr; - unsigned int cnt; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) - s3c_disable_clocks(clk_cdev[cnt], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) - s3c_register_clksrc(clksrc_cdev[ptr], 1); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup)); - - s3c24xx_register_clock(&dummy_apb_pclk); -} diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c deleted file mode 100644 index 0b3ca2ed53e9..000000000000 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ /dev/null @@ -1,701 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P6450 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> - -#include "clock.h" -#include "common.h" - -static struct clksrc_clk clk_mout_dpll = { - .clk = { - .name = "mout_dpll", - }, - .sources = &clk_src_dpll, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 }, -}; - -static u32 epll_div[][5] = { - { 133000000, 27307, 55, 2, 2 }, - { 100000000, 43691, 41, 2, 2 }, - { 480000000, 0, 80, 2, 0 }, -}; - -static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P64X0_EPLL_CON); - epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); - - epll_con_k &= ~(PLL90XX_KDIV_MASK); - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P64X0_EPLL_CON); - __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); - - printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", - clk->rate, rate); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5p6450_epll_ops = { - .get_rate = s5p_epll_get_rate, - .set_rate = s5p6450_epll_set_rate, -}; - -static struct clksrc_clk clk_dout_epll = { - .clk = { - .name = "dout_epll", - .parent = &clk_mout_epll.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 }, -}; - -static struct clksrc_clk clk_mout_hclk_sel = { - .clk = { - .name = "mout_hclk_sel", - }, - .sources = &clkset_hclk_low, - .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 }, -}; - -static struct clk *clkset_hclk_list[] = { - &clk_mout_hclk_sel.clk, - &clk_armclk.clk, -}; - -static struct clksrc_sources clkset_hclk = { - .sources = clkset_hclk_list, - .nr_sources = ARRAY_SIZE(clkset_hclk_list), -}; - -static struct clksrc_clk clk_hclk = { - .clk = { - .name = "clk_hclk", - }, - .sources = &clkset_hclk, - .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk = { - .clk = { - .name = "clk_pclk", - .parent = &clk_hclk.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, -}; -static struct clksrc_clk clk_dout_pwm_ratio0 = { - .clk = { - .name = "clk_dout_pwm_ratio0", - .parent = &clk_mout_hclk_sel.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_to_wdt_pwm = { - .clk = { - .name = "clk_pclk_to_wdt_pwm", - .parent = &clk_dout_pwm_ratio0.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 }, -}; - -static struct clksrc_clk clk_hclk_low = { - .clk = { - .name = "clk_hclk_low", - }, - .sources = &clkset_hclk_low, - .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_low = { - .clk = { - .name = "clk_pclk_low", - .parent = &clk_hclk_low.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, -}; - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_off[] = { - { - .name = "usbhost", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "dma", - .devname = "dma-pl330", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "usbotg", - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s5p64x0_hclk1_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "watchdog", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "rtc", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "adc", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "s5p64x0-spi.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "spi", - .devname = "s5p64x0-spi.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "dmc0", - .parent = &clk_pclk.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 30), - } -}; - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "intc", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "mem", - .parent = &clk_hclk.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "timers", - .parent = &clk_pclk_to_wdt_pwm.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "gpio", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 18), - }, -}; - -static struct clk *clkset_uart_list[] = { - &clk_dout_epll.clk, - &clk_dout_mpll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_mali_list[] = { - &clk_mout_epll.clk, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_mali = { - .sources = clkset_mali_list, - .nr_sources = ARRAY_SIZE(clkset_mali_list), -}; - -static struct clk *clkset_group2_list[] = { - &clk_dout_epll.clk, - &clk_dout_mpll.clk, - &clk_ext_xtal_mux, -}; - -static struct clksrc_sources clkset_group2 = { - .sources = clkset_group2_list, - .nr_sources = ARRAY_SIZE(clkset_group2_list), -}; - -static struct clk *clkset_dispcon_list[] = { - &clk_dout_epll.clk, - &clk_dout_mpll.clk, - &clk_ext_xtal_mux, - &clk_mout_dpll.clk, -}; - -static struct clksrc_sources clkset_dispcon = { - .sources = clkset_dispcon_list, - .nr_sources = ARRAY_SIZE(clkset_dispcon_list), -}; - -static struct clk *clkset_hsmmc44_list[] = { - &clk_dout_epll.clk, - &clk_dout_mpll.clk, - &clk_ext_xtal_mux, - &s5p_clk_27m, - &clk_48m, -}; - -static struct clksrc_sources clkset_hsmmc44 = { - .sources = clkset_hsmmc44_list, - .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list), -}; - -static struct clk *clkset_sclk_audio0_list[] = { - [0] = &clk_dout_epll.clk, - [1] = &clk_dout_mpll.clk, - [2] = &clk_ext_xtal_mux, - [3] = NULL, - [4] = NULL, -}; - -static struct clksrc_sources clkset_sclk_audio0 = { - .sources = clkset_sclk_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list), -}; - -static struct clksrc_clk clk_sclk_audio0 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.0", - .enable = s5p64x0_sclk_ctrl, - .ctrlbit = (1 << 8), - .parent = &clk_dout_epll.clk, - }, - .sources = &clkset_sclk_audio0, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_fimc", - .ctrlbit = (1 << 10), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "aclk_mali", - .ctrlbit = (1 << 2), - .enable = s5p64x0_sclk1_ctrl, - }, - .sources = &clkset_mali, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_2d", - .ctrlbit = (1 << 12), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_mali, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_usi", - .ctrlbit = (1 << 7), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_camif", - .ctrlbit = (1 << 6), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_dispcon", - .ctrlbit = (1 << 1), - .enable = s5p64x0_sclk1_ctrl, - }, - .sources = &clkset_dispcon, - .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_hsmmc44", - .ctrlbit = (1 << 30), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_hsmmc44, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 }, - }, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 24), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 25), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 26), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uclk = { - .clk = { - .name = "uclk1", - .ctrlbit = (1 << 5), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "s5p64x0-spi.0", - .ctrlbit = (1 << 20), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "s5p64x0-spi.1", - .ctrlbit = (1 << 21), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 26), -}; - -static struct clk clk_i2s1 = { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 15), -}; - -static struct clk clk_i2s2 = { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_pclk_low.clk, - .enable = s5p64x0_pclk_ctrl, - .ctrlbit = (1 << 16), -}; - -static struct clk *clk_cdev[] = { - &clk_i2s0, - &clk_i2s1, - &clk_i2s2, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uclk, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_audio0, -}; - -static struct clk_lookup s5p6450_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_sclk_audio0.clk), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), -}; - -/* Clock initialization code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_dout_epll, - &clk_mout_mpll, - &clk_dout_mpll, - &clk_armclk, - &clk_mout_hclk_sel, - &clk_dout_pwm_ratio0, - &clk_pclk_to_wdt_pwm, - &clk_hclk, - &clk_pclk, - &clk_hclk_low, - &clk_pclk_low, -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -void __init_or_cpufreq s5p6450_setup_clocks(void) -{ - struct clk *xtal_clk; - - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk_low; - unsigned long pclk; - unsigned long pclk_low; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long dpll; - unsigned int ptr; - - /* Set S5P6450 functions for clk_fout_epll */ - - clk_fout_epll.enable = s5p_epll_enable; - clk_fout_epll.ops = &s5p6450_epll_ops; - - clk_48m.enable = s5p64x0_clk48m_ctrl; - - xtal_clk = clk_get(NULL, "ext_xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), - __raw_readl(S5P64X0_EPLL_CON_K)); - dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON), - __raw_readl(S5P6450_DPLL_CON_K), pll_4650c); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_dpll.rate = dpll; - - printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ - " E=%ld.%ldMHz, D=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll), - print_mhz(dpll)); - - fclk = clk_get_rate(&clk_armclk.clk); - hclk = clk_get_rate(&clk_hclk.clk); - pclk = clk_get_rate(&clk_pclk.clk); - hclk_low = clk_get_rate(&clk_hclk_low.clk); - pclk_low = clk_get_rate(&clk_pclk_low.clk); - - printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", - print_mhz(hclk), print_mhz(hclk_low), - print_mhz(pclk), print_mhz(pclk_low)); - - clk_f.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -void __init s5p6450_register_clocks(void) -{ - int ptr; - unsigned int cnt; - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) - s3c_disable_clocks(clk_cdev[cnt], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) - s3c_register_clksrc(clksrc_cdev[ptr], 1); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup)); - - s3c24xx_register_clock(&dummy_apb_pclk); -} diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c deleted file mode 100644 index 57e718957ef3..000000000000 --- a/arch/arm/mach-s5p64x0/clock.c +++ /dev/null @@ -1,236 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> - -#include "common.h" - -struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 }, -}; - -struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 }, -}; - -enum perf_level { - L0 = 532*1000, - L1 = 266*1000, - L2 = 133*1000, -}; - -static const u32 clock_table[][3] = { - /*{ARM_CLK, DIVarm, DIVhclk}*/ - {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, - {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, - {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, -}; - -static unsigned long s5p64x0_armclk_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; - - return rate / (clkdiv + 1); -} - -static unsigned long s5p64x0_armclk_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 iter; - - for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (rate > clock_table[iter][0]) - return clock_table[iter-1][0]; - } - - return clock_table[ARRAY_SIZE(clock_table) - 1][0]; -} - -static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 round_tmp; - u32 iter; - u32 clk_div0_tmp; - u32 cur_rate = clk->ops->get_rate(clk); - unsigned long flags; - - round_tmp = clk->ops->round_rate(clk, rate); - if (round_tmp == cur_rate) - return 0; - - - for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (round_tmp == clock_table[iter][0]) - break; - } - - if (iter >= ARRAY_SIZE(clock_table)) - iter = ARRAY_SIZE(clock_table) - 1; - - local_irq_save(flags); - if (cur_rate > round_tmp) { - /* Frequency Down */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P64X0_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - - } else { - /* Frequency Up */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P64X0_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - } - local_irq_restore(flags); - - clk->rate = clock_table[iter][0]; - - return 0; -} - -static struct clk_ops s5p64x0_clkarm_ops = { - .get_rate = s5p64x0_armclk_get_rate, - .set_rate = s5p64x0_armclk_set_rate, - .round_rate = s5p64x0_armclk_round_rate, -}; - -struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .id = 1, - .parent = &clk_mout_apll.clk, - .ops = &s5p64x0_clkarm_ops, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 }, -}; - -struct clksrc_clk clk_dout_mpll = { - .clk = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_mpll.clk, - }, - .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 }, -}; - -static struct clk *clkset_hclk_low_list[] = { - &clk_mout_apll.clk, - &clk_mout_mpll.clk, -}; - -struct clksrc_sources clkset_hclk_low = { - .sources = clkset_hclk_low_list, - .nr_sources = ARRAY_SIZE(clkset_hclk_low_list), -}; - -int s5p64x0_pclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable); -} - -int s5p64x0_hclk0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable); -} - -int s5p64x0_hclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable); -} - -int s5p64x0_sclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable); -} - -int s5p64x0_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable); -} - -int s5p64x0_mem_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable); -} - -int s5p64x0_clk48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S5P64X0_OTHERS); - if (enable) - val |= S5P64X0_OTHERS_USB_SIG_MASK; - else - val &= ~S5P64X0_OTHERS_USB_SIG_MASK; - - __raw_writel(val, S5P64X0_OTHERS); - - local_irq_restore(flags); - - return 0; -} diff --git a/arch/arm/mach-s5p64x0/clock.h b/arch/arm/mach-s5p64x0/clock.h deleted file mode 100644 index 28b8e3c6bd24..000000000000 --- a/arch/arm/mach-s5p64x0/clock.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for s5p64x0 clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MACH_S5P64X0_CLOCK_H -#define __MACH_S5P64X0_CLOCK_H __FILE__ - -#include <linux/clk.h> - -extern struct clksrc_clk clk_mout_apll; -extern struct clksrc_clk clk_mout_mpll; -extern struct clksrc_clk clk_mout_epll; - -extern int s5p64x0_epll_enable(struct clk *clk, int enable); -extern unsigned long s5p64x0_epll_get_rate(struct clk *clk); - -extern struct clksrc_clk clk_armclk; -extern struct clksrc_clk clk_dout_mpll; - -extern struct clksrc_sources clkset_hclk_low; - -extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable); -extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable); -extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable); -extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable); -extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable); -extern int s5p64x0_mem_ctrl(struct clk *clk, int enable); - -extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable); - -#endif /* __MACH_S5P64X0_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c deleted file mode 100644 index 9a43be002d78..000000000000 --- a/arch/arm/mach-s5p64x0/common.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Codes for S5P64X0 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <clocksource/samsung_pwm.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/reboot.h> - -#include <asm/irq.h> -#include <asm/proc-fns.h> -#include <asm/system_misc.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/map.h> -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/pm.h> -#include <plat/sdhci.h> -#include <plat/adc-core.h> -#include <plat/fb-core.h> -#include <plat/spi-core.h> -#include <plat/gpio-cfg.h> -#include <plat/pwm-core.h> -#include <plat/regs-irqtype.h> -#include <plat/watchdog-reset.h> - -#include "common.h" - -static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6450[] = "S5P6450"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = S5P6440_CPU_ID, - .idmask = S5P64XX_CPU_MASK, - .map_io = s5p6440_map_io, - .init_clocks = s5p6440_init_clocks, - .init_uarts = s5p6440_init_uarts, - .init = s5p64x0_init, - .name = name_s5p6440, - }, { - .idcode = S5P6450_CPU_ID, - .idmask = S5P64XX_CPU_MASK, - .map_io = s5p6450_map_io, - .init_clocks = s5p6450_init_clocks, - .init_uarts = s5p6450_init_uarts, - .init = s5p64x0_init, - .name = name_s5p6450, - }, -}; - -/* Initial IO mappings */ - -static struct map_desc s5p64x0_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S5P64X0_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S5P64X0_PA_WDT), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5P64X0_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc s5p6440_iodesc[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc s5p6450_iodesc[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), - .length = SZ_512K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART + SZ_512K, - .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void s5p64x0_idle(void) -{ - unsigned long val; - - val = __raw_readl(S5P64X0_PWR_CFG); - val &= ~(0x3 << 5); - val |= (0x1 << 5); - __raw_writel(val, S5P64X0_PWR_CFG); - - cpu_do_idle(); -} - -static struct samsung_pwm_variant s5p64x0_pwm_variant = { - .bits = 32, - .div_base = 0, - .has_tint_cstat = true, - .tclk_mask = 0, -}; - -void __init samsung_set_timer_source(unsigned int event, unsigned int source) -{ - s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); -} - -void __init samsung_timer_init(void) -{ - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, - IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, - }; - - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &s5p64x0_pwm_variant); -} - -/* - * s5p64x0_map_io - * - * register the standard CPU IO areas - */ - -void __init s5p64x0_init_io(struct map_desc *mach_desc, int size) -{ - /* initialize the io descriptors we need for initialization */ - iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); - if (mach_desc) - iotable_init(mach_desc, size); - - /* detect cpu id and rev. */ - s5p_init_cpu(S5P64X0_SYS_ID); - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); - samsung_wdt_reset_init(S3C_VA_WATCHDOG); - - samsung_pwm_set_platdata(&s5p64x0_pwm_variant); -} - -#ifdef CONFIG_CPU_S5P6440 -void __init s5p6440_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); - s3c_fb_setname("s5p64x0-fb"); - s3c64xx_spi_setname("s5p64x0-spi"); - - s5p64x0_default_sdhci0(); - s5p64x0_default_sdhci1(); - s5p6440_default_sdhci2(); - - iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); -} -#endif - -#ifdef CONFIG_CPU_S5P6450 -void __init s5p6450_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); - s3c_fb_setname("s5p64x0-fb"); - s3c64xx_spi_setname("s5p64x0-spi"); - - s5p64x0_default_sdhci0(); - s5p64x0_default_sdhci1(); - s5p6450_default_sdhci2(); - - iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); -} -#endif - -/* - * s5p64x0_init_clocks - * - * register and setup the CPU clocks - */ -#ifdef CONFIG_CPU_S5P6440 -void __init s5p6440_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6440_register_clocks(); - s5p6440_setup_clocks(); -} -#endif - -#ifdef CONFIG_CPU_S5P6450 -void __init s5p6450_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6450_register_clocks(); - s5p6450_setup_clocks(); -} -#endif - -/* - * s5p64x0_init_irq - * - * register the CPU interrupts - */ -#ifdef CONFIG_CPU_S5P6440 -void __init s5p6440_init_irq(void) -{ - /* S5P6440 supports 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] - * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] - */ - vic[0] = 0xff800ae7; - vic[1] = 0xffbf23e5; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} -#endif - -#ifdef CONFIG_CPU_S5P6450 -void __init s5p6450_init_irq(void) -{ - /* S5P6450 supports only 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] - * VIC1 is missing IRQ VIC1[12, 14, 23] - */ - vic[0] = 0xff9f1fff; - vic[1] = 0xff7fafff; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} -#endif - -struct bus_type s5p64x0_subsys = { - .name = "s5p64x0-core", - .dev_name = "s5p64x0-core", -}; - -static struct device s5p64x0_dev = { - .bus = &s5p64x0_subsys, -}; - -static int __init s5p64x0_core_init(void) -{ - return subsys_system_register(&s5p64x0_subsys, NULL); -} -core_initcall(s5p64x0_core_init); - -int __init s5p64x0_init(void) -{ - printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); - - /* set idle function */ - arm_pm_idle = s5p64x0_idle; - - return device_register(&s5p64x0_dev); -} - -/* uart registration process */ -#ifdef CONFIG_CPU_S5P6440 -void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - int uart; - - for (uart = 0; uart < no; uart++) { - s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); - s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; - } - - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} -#endif - -#ifdef CONFIG_CPU_S5P6450 -void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} -#endif - -#define eint_offset(irq) ((irq) - IRQ_EINT(0)) - -static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = eint_offset(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - if (offs > 15) - return -EINVAL; - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No edge setting!\n"); - break; - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs / 2) * 4; - mask = 0x7 << shift; - - ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P64X0_EINT0CON0); - - /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ - if (soc_is_s5p6450()) - s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); - - return 0; -} - -/* - * s5p64x0_irq_demux_eint - * - * This function demuxes the IRQ from the group0 external interrupts, - * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into - * the specific handlers s5p64x0_irq_demux_eintX_Y. - */ -static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end) -{ - u32 status = __raw_readl(S5P64X0_EINT0PEND); - u32 mask = __raw_readl(S5P64X0_EINT0MASK); - unsigned int irq; - - status &= ~mask; - status >>= start; - status &= (1 << (end - start + 1)) - 1; - - for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { - if (status & 1) - generic_handle_irq(irq); - status >>= 1; - } -} - -static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(0, 3); -} - -static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(4, 11); -} - -static void s5p64x0_irq_demux_eint12_15(unsigned int irq, - struct irq_desc *desc) -{ - s5p64x0_irq_demux_eint(12, 15); -} - -static int s5p64x0_alloc_gc(void) -{ - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE, - S5P_VA_GPIO, handle_level_irq); - if (!gc) { - printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0" - "external interrupts failed\n", __func__); - return -EINVAL; - } - - ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_mask = irq_gc_mask_set_bit; - ct->chip.irq_unmask = irq_gc_mask_clr_bit; - ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; - ct->chip.irq_set_wake = s3c_irqext_wake; - ct->regs.ack = EINT0PEND_OFFSET; - ct->regs.mask = EINT0MASK_OFFSET; - irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); - return 0; -} - -static int __init s5p64x0_init_irq_eint(void) -{ - int ret = s5p64x0_alloc_gc(); - irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3); - irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11); - irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15); - - return ret; -} -arch_initcall(s5p64x0_init_irq_eint); - -void s5p64x0_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode != REBOOT_SOFT) - samsung_wdt_reset(); - - soft_restart(0); -} diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h deleted file mode 100644 index cbe7f3d731d0..000000000000 --- a/arch/arm/mach-s5p64x0/common.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S5P64X0 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H -#define __ARCH_ARM_MACH_S5P64X0_COMMON_H - -#include <linux/reboot.h> - -void s5p6440_init_irq(void); -void s5p6450_init_irq(void); -void s5p64x0_init_io(struct map_desc *mach_desc, int size); - -void s5p6440_register_clocks(void); -void s5p6440_setup_clocks(void); - -void s5p6450_register_clocks(void); -void s5p6450_setup_clocks(void); - -void s5p64x0_restart(enum reboot_mode mode, const char *cmd); -extern int s5p64x0_init(void); - -#ifdef CONFIG_CPU_S5P6440 - -extern void s5p6440_map_io(void); -extern void s5p6440_init_clocks(int xtal); - -extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6440_init_clocks NULL -#define s5p6440_init_uarts NULL -#define s5p6440_map_io NULL -#endif - -#ifdef CONFIG_CPU_S5P6450 - -extern void s5p6450_map_io(void); -extern void s5p6450_init_clocks(int xtal); - -extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6450_init_clocks NULL -#define s5p6450_init_uarts NULL -#define s5p6450_map_io NULL -#endif - -#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */ diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c deleted file mode 100644 index 723d4773c323..000000000000 --- a/arch/arm/mach-s5p64x0/dev-audio.c +++ /dev/null @@ -1,176 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6440_cfg_i2s(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s5p6440_i2s_pdata = { - .cfg_gpio = s5p6440_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN, - }, - }, -}; - -static struct resource s5p64x0_i2s0_resource[] = { - [0] = DEFINE_RES_MEM(S5P64X0_PA_I2S, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), -}; - -struct platform_device s5p6440_device_iis = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource), - .resource = s5p64x0_i2s0_resource, - .dev = { - .platform_data = &s5p6440_i2s_pdata, - }, -}; - -static int s5p6450_cfg_i2s(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5)); - break; - case 1: - s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5)); - break; - case 2: - s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s5p6450_i2s0_pdata = { - .cfg_gpio = s5p6450_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN, - }, - }, -}; - -struct platform_device s5p6450_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource), - .resource = s5p64x0_i2s0_resource, - .dev = { - .platform_data = &s5p6450_i2s0_pdata, - }, -}; - -static struct s3c_audio_pdata s5p6450_i2s_pdata = { - .cfg_gpio = s5p6450_cfg_i2s, -}; - -static struct resource s5p6450_i2s1_resource[] = { - [0] = DEFINE_RES_MEM(S5P6450_PA_I2S1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), -}; - -struct platform_device s5p6450_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6450_i2s1_resource), - .resource = s5p6450_i2s1_resource, - .dev = { - .platform_data = &s5p6450_i2s_pdata, - }, -}; - -static struct resource s5p6450_i2s2_resource[] = { - [0] = DEFINE_RES_MEM(S5P6450_PA_I2S2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), -}; - -struct platform_device s5p6450_device_iis2 = { - .name = "samsung-i2s", - .id = 2, - .num_resources = ARRAY_SIZE(s5p6450_i2s2_resource), - .resource = s5p6450_i2s2_resource, - .dev = { - .platform_data = &s5p6450_i2s_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2)); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s5p6440_pcm_pdata = { - .cfg_gpio = s5p6440_pcm_cfg_gpio, -}; - -static struct resource s5p6440_pcm0_resource[] = { - [0] = DEFINE_RES_MEM(S5P64X0_PA_PCM, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), -}; - -struct platform_device s5p6440_device_pcm = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), - .resource = s5p6440_pcm0_resource, - .dev = { - .platform_data = &s5p6440_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c deleted file mode 100644 index 9c4ce085f585..000000000000 --- a/arch/arm/mach-s5p64x0/dma.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/dma.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl330.h> - -#include <asm/irq.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/regs-clock.h> -#include <mach/dma.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/irqs.h> - -static u8 s5p6440_pdma_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_MAX, - DMACH_MAX, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_TX, - DMACH_I2S0_RX, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_MAX, - DMACH_MAX, - DMACH_MAX, - DMACH_MAX, - DMACH_SPI1_TX, - DMACH_SPI1_RX, -}; - -static struct dma_pl330_platdata s5p6440_pdma_pdata = { - .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), - .peri_id = s5p6440_pdma_peri, -}; - -static u8 s5p6450_pdma_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_TX, - DMACH_I2S0_RX, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_PCM1_TX, - DMACH_PCM1_RX, - DMACH_PCM2_TX, - DMACH_PCM2_RX, - DMACH_SPI1_TX, - DMACH_SPI1_RX, - DMACH_USI_TX, - DMACH_USI_RX, - DMACH_MAX, - DMACH_I2S1_TX, - DMACH_I2S1_RX, - DMACH_I2S2_TX, - DMACH_I2S2_RX, - DMACH_PWM, - DMACH_UART5_RX, - DMACH_UART5_TX, -}; - -static struct dma_pl330_platdata s5p6450_pdma_pdata = { - .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), - .peri_id = s5p6450_pdma_peri, -}; - -static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, - S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL); - -static int __init s5p64x0_dma_init(void) -{ - if (soc_is_s5p6450()) { - dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); - s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata; - } else { - dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); - s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata; - } - - amba_device_register(&s5p64x0_pdma_device, &iomem_resource); - - return 0; -} -arch_initcall(s5p64x0_dma_init); diff --git a/arch/arm/mach-s5p64x0/i2c.h b/arch/arm/mach-s5p64x0/i2c.h deleted file mode 100644 index 1e5bb4ea200d..000000000000 --- a/arch/arm/mach-s5p64x0/i2c.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 I2C configuration - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev); -extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev); - -extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev); -extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev); diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S deleted file mode 100644 index 8759e7882bcb..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <linux/serial_s3c.h> -#include <plat/map-base.h> -#include <plat/map-s5p.h> - - .macro addruart, rp, rv, tmp - mov \rp, #0xE0000000 - orr \rp, \rp, #0x00100000 - ldr \rp, [\rp, #0x118 ] - and \rp, \rp, #0xff000 - teq \rp, #0x50000 @@ S5P6450 - ldreq \rp, =0xEC800000 - movne \rp, #0xEC000000 @@ S5P6440 - ldrne \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h deleted file mode 100644 index 5a622af461d7..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common common DMA API driver for PL330 */ -#include <plat/dma-pl330.h> - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h deleted file mode 100644 index 06cd3c9b16ac..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/gpio.h +++ /dev/null @@ -1,132 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -/* GPIO bank sizes */ - -#define S5P6440_GPIO_A_NR (6) -#define S5P6440_GPIO_B_NR (7) -#define S5P6440_GPIO_C_NR (8) -#define S5P6440_GPIO_F_NR (16) -#define S5P6440_GPIO_G_NR (7) -#define S5P6440_GPIO_H_NR (10) -#define S5P6440_GPIO_I_NR (16) -#define S5P6440_GPIO_J_NR (12) -#define S5P6440_GPIO_N_NR (16) -#define S5P6440_GPIO_P_NR (8) -#define S5P6440_GPIO_R_NR (15) - -#define S5P6450_GPIO_A_NR (6) -#define S5P6450_GPIO_B_NR (7) -#define S5P6450_GPIO_C_NR (8) -#define S5P6450_GPIO_D_NR (8) -#define S5P6450_GPIO_F_NR (16) -#define S5P6450_GPIO_G_NR (14) -#define S5P6450_GPIO_H_NR (10) -#define S5P6450_GPIO_I_NR (16) -#define S5P6450_GPIO_J_NR (12) -#define S5P6450_GPIO_K_NR (5) -#define S5P6450_GPIO_N_NR (16) -#define S5P6450_GPIO_P_NR (11) -#define S5P6450_GPIO_Q_NR (14) -#define S5P6450_GPIO_R_NR (15) -#define S5P6450_GPIO_S_NR (8) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5P64X0_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p6440_gpio_number { - S5P6440_GPIO_A_START = 0, - S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A), - S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B), - S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C), - S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F), - S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G), - S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H), - S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I), - S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J), - S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N), - S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P), -}; - -enum s5p6450_gpio_number { - S5P6450_GPIO_A_START = 0, - S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A), - S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B), - S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C), - S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D), - S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F), - S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G), - S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H), - S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I), - S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J), - S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K), - S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N), - S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P), - S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q), - S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R), -}; - -/* GPIO number definitions */ - -#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) -#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) -#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) -#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) -#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) -#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) -#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) -#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) -#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) -#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) -#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) - -#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr)) -#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr)) -#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr)) -#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr)) -#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr)) -#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr)) -#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr)) -#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr)) -#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr)) -#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr)) -#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr)) -#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr)) -#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr)) -#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr)) -#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr)) - -/* the end of the S5P64X0 specific gpios */ - -#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) -#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1) - -#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \ - S5P6440_GPIO_END : S5P6450_GPIO_END) - -#define S3C_GPIO_END S5P64X0_GPIO_END - -/* define the number of gpios we need to the one after the last GPIO range */ - -#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h deleted file mode 100644 index d3e87996dd9a..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h deleted file mode 100644 index 53982db9d259..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ /dev/null @@ -1,148 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h - * - * Copyright 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* VIC0 */ - -#define IRQ_EINT0_3 S5P_IRQ_VIC0(0) -#define IRQ_EINT4_11 S5P_IRQ_VIC0(1) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(2) -#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */ -#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */ -#define IRQ_IIC1 S5P_IRQ_VIC0(5) -#define IRQ_I2SV40 S5P_IRQ_VIC0(6) -#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */ - -#define IRQ_2D S5P_IRQ_VIC0(11) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25) -#define IRQ_WDT S5P_IRQ_VIC0(26) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28) -#define IRQ_DISPCON0 S5P_IRQ_VIC0(29) -#define IRQ_DISPCON1 S5P_IRQ_VIC0(30) -#define IRQ_DISPCON2 S5P_IRQ_VIC0(31) - -/* VIC1 */ - -#define IRQ_EINT12_15 S5P_IRQ_VIC1(0) -#define IRQ_PCM0 S5P_IRQ_VIC1(2) -#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */ -#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */ -#define IRQ_UART0 S5P_IRQ_VIC1(5) -#define IRQ_UART1 S5P_IRQ_VIC1(6) -#define IRQ_UART2 S5P_IRQ_VIC1(7) -#define IRQ_UART3 S5P_IRQ_VIC1(8) -#define IRQ_DMA0 S5P_IRQ_VIC1(9) -#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */ -#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */ -#define IRQ_NFC S5P_IRQ_VIC1(13) -#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */ -#define IRQ_SPI0 S5P_IRQ_VIC1(16) -#define IRQ_SPI1 S5P_IRQ_VIC1(17) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */ -#define IRQ_IIC S5P_IRQ_VIC1(18) -#define IRQ_DISPCON3 S5P_IRQ_VIC1(19) -#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) -#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */ -#define IRQ_HSMMC0 S5P_IRQ_VIC1(24) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(25) -#define IRQ_OTG S5P_IRQ_VIC1(26) -#define IRQ_DSI S5P_IRQ_VIC1(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) -#define IRQ_TSI S5P_IRQ_VIC1(29) -#define IRQ_PENDN S5P_IRQ_VIC1(30) -#define IRQ_TC IRQ_PENDN -#define IRQ_ADC S5P_IRQ_VIC1(31) - -/* UART interrupts, S5P6450 has 5 UARTs */ -#define IRQ_S5P_UART_BASE4 (96) -#define IRQ_S5P_UART_BASE5 (100) - -#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR) - -/* S3C compatibilty defines */ -#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 -#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 - -#define IRQ_I2S0 IRQ_I2SV40 - -#define IRQ_LCD_FIFO IRQ_DISPCON0 -#define IRQ_LCD_VSYNC IRQ_DISPCON1 -#define IRQ_LCD_SYSTEM IRQ_DISPCON2 - -/* S5P6450 EINT feature will be added */ - -/* - * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined - * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place - * after the pair of VICs. - */ - -#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6) - -#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) - -#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE) -/* - * S5P6440 has 0-15 external interrupts in group 0. Only these can be used - * to wake up from sleep. If request is beyond this range, by mistake, a large - * return value for an irq number should be indication of something amiss. - */ -#define S5P_EINT_BASE2 (0xf0000000) - -/* - * Next the external interrupt groups. These are similar to the IRQ_EINT(x) - * that they are sourced from the GPIO pins but with a different scheme for - * priority and source indication. - * - * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO - * interrupts, but for historical reasons they are kept apart from these - * next interrupts. - * - * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the - * machine specific support files. - */ - -/* Actually, #6 and #7 are missing in the EINT_GROUP1 */ -#define IRQ_EINT_GROUP1_NR (15) -#define IRQ_EINT_GROUP2_NR (8) -#define IRQ_EINT_GROUP5_NR (7) -#define IRQ_EINT_GROUP6_NR (10) -/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */ -#define IRQ_EINT_GROUP8_NR (11) - -#define IRQ_EINT_GROUP_BASE S5P_EINT(16) -#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0) -#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) -#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) -#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) -#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) - -#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x)) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h deleted file mode 100644 index 50a6e96d6389..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ /dev/null @@ -1,96 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/map.h - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P64X0_PA_SDRAM 0x20000000 - -#define S5P64X0_PA_CHIPID 0xE0000000 - -#define S5P64X0_PA_SYSCON 0xE0100000 - -#define S5P64X0_PA_GPIO 0xE0308000 - -#define S5P64X0_PA_VIC0 0xE4000000 -#define S5P64X0_PA_VIC1 0xE4100000 - -#define S5P64X0_PA_SROMC 0xE7000000 - -#define S5P64X0_PA_PDMA 0xE9000000 - -#define S5P64X0_PA_TIMER 0xEA000000 -#define S5P64X0_PA_RTC 0xEA100000 -#define S5P64X0_PA_WDT 0xEA200000 - -#define S5P6440_PA_IIC0 0xEC104000 -#define S5P6440_PA_IIC1 0xEC20F000 -#define S5P6450_PA_IIC0 0xEC100000 -#define S5P6450_PA_IIC1 0xEC200000 - -#define S5P64X0_PA_SPI0 0xEC400000 -#define S5P64X0_PA_SPI1 0xEC500000 - -#define S5P64X0_PA_HSOTG 0xED100000 - -#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) - -#define S5P64X0_PA_FB 0xEE000000 - -#define S5P64X0_PA_I2S 0xF2000000 -#define S5P6450_PA_I2S1 0xF2800000 -#define S5P6450_PA_I2S2 0xF2900000 - -#define S5P64X0_PA_PCM 0xF2100000 - -#define S5P64X0_PA_ADC 0xF3000000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2) -#define S3C_PA_IIC S5P6440_PA_IIC0 -#define S3C_PA_IIC1 S5P6440_PA_IIC1 -#define S3C_PA_RTC S5P64X0_PA_RTC -#define S3C_PA_WDT S5P64X0_PA_WDT -#define S3C_PA_FB S5P64X0_PA_FB -#define S3C_PA_SPI0 S5P64X0_PA_SPI0 -#define S3C_PA_SPI1 S5P64X0_PA_SPI1 - -#define S5P_PA_CHIPID S5P64X0_PA_CHIPID -#define S5P_PA_SROMC S5P64X0_PA_SROMC -#define S5P_PA_SYSCON S5P64X0_PA_SYSCON -#define S5P_PA_TIMER S5P64X0_PA_TIMER - -#define SAMSUNG_PA_ADC S5P64X0_PA_ADC -#define SAMSUNG_PA_TIMER S5P64X0_PA_TIMER - -/* UART */ - -#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) -#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) - -#define S5P_PA_UART0 S5P6450_PA_UART(0) -#define S5P_PA_UART1 S5P6450_PA_UART(1) -#define S5P_PA_UART2 S5P6450_PA_UART(2) -#define S5P_PA_UART3 S5P6450_PA_UART(3) -#define S5P_PA_UART4 S5P6450_PA_UART(4) -#define S5P_PA_UART5 S5P6450_PA_UART(5) - -#define S5P_SZ_UART SZ_256 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h deleted file mode 100644 index 1e0eb65b2b82..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/pm-core.h +++ /dev/null @@ -1,119 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c - * - * Based on PM core support for S3C64XX by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/serial_s3c.h> - -#include <mach/regs-gpio.h> - -static inline void s3c_pm_debug_init_uart(void) -{ - u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK); - - /* - * As a note, since the S5P64X0 UARTs generally have multiple - * clock sources, we simply enable PCLK at the moment and hope - * that the resume settings for the UART are suitable for the - * use with PCLK. - */ - tmp |= S5P64X0_CLK_GATE_PCLK_UART0; - tmp |= S5P64X0_CLK_GATE_PCLK_UART1; - tmp |= S5P64X0_CLK_GATE_PCLK_UART2; - tmp |= S5P64X0_CLK_GATE_PCLK_UART3; - - __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK); - udelay(10); -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - /* VIC should have already been taken care of */ - - /* clear any pending EINT0 interrupts */ - __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND); -} - -static inline void s3c_pm_arch_stop_clocks(void) { } -static inline void s3c_pm_arch_show_resume_irqs(void) { } - -/* - * make these defines, we currently do not have any need to change - * the IRQ wake controls depending on the CPU we are running on - */ -#define s3c_irqwake_eintallow ((1 << 16) - 1) -#define s3c_irqwake_intallow (~0) - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ - u32 ucon = __raw_readl(regs + S3C2410_UCON); - u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; - u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; - u32 new_ucon; - u32 delta; - - /* - * S5P64X0 UART blocks only support level interrupts, so ensure that - * when we restore unused UART blocks we force the level interrupt - * settings. - */ - save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; - - /* - * We have a constraint on changing the clock type of the UART - * between UCLKx and PCLK, so ensure that when we restore UCON - * that the CLK field is correctly modified if the bootloader - * has changed anything. - */ - if (ucon_clk != save_clk) { - new_ucon = save->ucon; - delta = ucon_clk ^ save_clk; - - /* - * change from UCLKx => wrong PCLK, - * either UCLK can be tested for by a bit-test - * with UCLK0 - */ - if (ucon_clk & S3C6400_UCON_UCLK0 && - !(save_clk & S3C6400_UCON_UCLK0) && - delta & S3C6400_UCON_PCLK2) { - new_ucon &= ~S3C6400_UCON_UCLK0; - } else if (delta == S3C6400_UCON_PCLK2) { - /* - * as a precaution, don't change from - * PCLK2 => PCLK or vice-versa - */ - new_ucon ^= S3C6400_UCON_PCLK2; - } - - S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", - ucon, new_ucon, save->ucon); - save->ucon = new_ucon; - } -} - -static inline void s3c_pm_restored_gpios(void) -{ - /* ensure sleep mode has been cleared from the system */ - __raw_writel(0, S5P64X0_SLPEN); -} - -static inline void samsung_pm_saved_gpios(void) -{ - /* - * turn on the sleep mode and keep it there, as it seems that during - * suspend the xCON registers get re-set and thus you can end up with - * problems between going to sleep and resuming. - */ - __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN); -} diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h deleted file mode 100644 index bd91112c813c..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h +++ /dev/null @@ -1,98 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P64X0_APLL_CON S5P_CLKREG(0x0C) -#define S5P64X0_MPLL_CON S5P_CLKREG(0x10) -#define S5P64X0_EPLL_CON S5P_CLKREG(0x14) -#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18) - -#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C) - -#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20) -#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24) -#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28) - -#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30) -#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34) -#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38) -#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C) - -#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40) - -#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44) -#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48) - -#define S5P6450_DPLL_CON S5P_CLKREG(0x50) -#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54) - -#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100) -#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C) - -#define S5P64X0_SYS_ID S5P_CLKREG(0x118) -#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C) - -#define S5P64X0_PWR_CFG S5P_CLKREG(0x804) -#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808) -#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818) -#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828) - -#define S5P64X0_OTHERS S5P_CLKREG(0x900) -#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908) - -#define S5P64X0_INFORM0 S5P_CLKREG(0xA00) - -#define S5P64X0_CLKDIV0_HCLK_SHIFT (8) -#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT) - -/* HCLK GATE Registers */ -#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2) -#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2) - -/* PCLK GATE Registers */ -#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4) -#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3) -#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2) -#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1) - -#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15) -#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14) -#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11) -#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10) -#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5) -#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5) - -#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0) - -#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0) - -#define S5P6450_OTHERS_DISABLE_INT (1 << 31) -#define S5P64X0_OTHERS_RET_UART (1 << 26) -#define S5P64X0_OTHERS_RET_MMC1 (1 << 25) -#define S5P64X0_OTHERS_RET_MMC0 (1 << 24) -#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16) - -/* Compatibility defines */ - -#define ARM_CLK_DIV S5P64X0_CLK_DIV0 -#define ARM_DIV_RATIO_SHIFT 0 -#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT) - -#define S5P_EPLL_CON S5P64X0_EPLL_CON - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h deleted file mode 100644 index cfdfa4fdadf2..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIO register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include <mach/map.h> - -/* Base addresses for each of the banks */ - -#define S5P64X0_GPA_BASE (S5P_VA_GPIO + 0x0000) -#define S5P64X0_GPB_BASE (S5P_VA_GPIO + 0x0020) -#define S5P64X0_GPC_BASE (S5P_VA_GPIO + 0x0040) -#define S5P64X0_GPF_BASE (S5P_VA_GPIO + 0x00A0) -#define S5P64X0_GPG_BASE (S5P_VA_GPIO + 0x00C0) -#define S5P64X0_GPH_BASE (S5P_VA_GPIO + 0x00E0) -#define S5P64X0_GPI_BASE (S5P_VA_GPIO + 0x0100) -#define S5P64X0_GPJ_BASE (S5P_VA_GPIO + 0x0120) -#define S5P64X0_GPN_BASE (S5P_VA_GPIO + 0x0830) -#define S5P64X0_GPP_BASE (S5P_VA_GPIO + 0x0160) -#define S5P64X0_GPR_BASE (S5P_VA_GPIO + 0x0290) - -#define S5P6450_GPD_BASE (S5P_VA_GPIO + 0x0060) -#define S5P6450_GPK_BASE (S5P_VA_GPIO + 0x0140) -#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180) -#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300) - -#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0) -#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0) -#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0) -#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0) - -#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0) -#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4) -#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0) -#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4) - -#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200) -#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220) -#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240) - -/* External interrupt control registers for group0 */ - -#define EINT0CON0_OFFSET (0x900) -#define EINT0FLTCON0_OFFSET (0x910) -#define EINT0FLTCON1_OFFSET (0x914) -#define EINT0MASK_OFFSET (0x920) -#define EINT0PEND_OFFSET (0x924) - -#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET) -#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET) -#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET) -#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET) -#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET) - -#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930) -#define S5P64X0_SLPEN_USE_xSLP (1 << 0) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h deleted file mode 100644 index d60397d1ff40..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <mach/map.h> - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c deleted file mode 100644 index 2ed921e095dc..000000000000 --- a/arch/arm/mach-s5p64x0/irq-pm.c +++ /dev/null @@ -1,98 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/irq-pm.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - Interrupt handling Power Management - * - * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/syscore_ops.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <plat/pm.h> - -#include <mach/regs-gpio.h> - -static struct sleep_save irq_save[] = { - SAVE_ITEM(S5P64X0_EINT0CON0), - SAVE_ITEM(S5P64X0_EINT0FLTCON0), - SAVE_ITEM(S5P64X0_EINT0FLTCON1), - SAVE_ITEM(S5P64X0_EINT0MASK), -}; - -static struct irq_grp_save { - u32 con; - u32 fltcon; - u32 mask; -} eint_grp_save[4]; - -#ifdef CONFIG_SERIAL_SAMSUNG -static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; -#endif - -static int s5p64x0_irq_pm_suspend(void) -{ - struct irq_grp_save *grp = eint_grp_save; - int i; - - S3C_PMDBG("%s: suspending IRQs\n", __func__); - - s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - -#ifdef CONFIG_SERIAL_SAMSUNG - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) - irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); -#endif - - for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { - grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4)); - grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4)); - grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4)); - } - - return 0; -} - -static void s5p64x0_irq_pm_resume(void) -{ - struct irq_grp_save *grp = eint_grp_save; - int i; - - S3C_PMDBG("%s: resuming IRQs\n", __func__); - - s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - -#ifdef CONFIG_SERIAL_SAMSUNG - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) - __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); -#endif - - for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { - __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4)); - __raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4)); - __raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4)); - } - - S3C_PMDBG("%s: IRQ configuration restored\n", __func__); -} - -static struct syscore_ops s5p64x0_irq_syscore_ops = { - .suspend = s5p64x0_irq_pm_suspend, - .resume = s5p64x0_irq_pm_resume, -}; - -static int __init s5p64x0_syscore_init(void) -{ - register_syscore_ops(&s5p64x0_irq_syscore_ops); - - return 0; -} -core_initcall(s5p64x0_syscore_init); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c deleted file mode 100644 index 6840e197cb2d..000000000000 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ /dev/null @@ -1,280 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/pwm_backlight.h> -#include <linux/fb.h> -#include <linux/mmc/host.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/pll.h> -#include <plat/adc.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <plat/samsung-time.h> -#include <plat/backlight.h> -#include <plat/fb.h> -#include <plat/sdhci.h> - -#include "common.h" -#include "i2c.h" - -#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2440_UFCON_TXTRIG16 | \ - S3C2410_UFCON_RXTRIG8) - -static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, - }, -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win smdk6440_fb_win0 = { - .max_bpp = 32, - .default_bpp = 24, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdk6440_lcd_timing = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = { - .win[0] = &smdk6440_fb_win0, - .vtiming = &smdk6440_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, -}; - -/* LCD power controller */ -static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd, - unsigned int power) -{ - int err; - - if (power) { - err = gpio_request(S5P6440_GPN(5), "GPN"); - if (err) { - printk(KERN_ERR "failed to request GPN for lcd reset\n"); - return; - } - - gpio_direction_output(S5P6440_GPN(5), 1); - gpio_set_value(S5P6440_GPN(5), 0); - gpio_set_value(S5P6440_GPN(5), 1); - gpio_free(S5P6440_GPN(5)); - } -} - -static struct plat_lcd_data smdk6440_lcd_power_data = { - .set_power = smdk6440_lte480_reset_power, -}; - -static struct platform_device smdk6440_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &smdk6440_lcd_power_data, -}; - -static struct platform_device *smdk6440_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_rtc, - &s3c_device_i2c0, - &s3c_device_i2c1, - &samsung_device_pwm, - &s3c_device_ts, - &s3c_device_wdt, - &s5p6440_device_iis, - &s3c_device_fb, - &smdk6440_lcd_lte480wv, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, -}; - -static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_INTERNAL, -#if defined(CONFIG_S5P64X0_SD_CH1_8BIT) - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { - .flags = 0, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, - .cfg_gpio = s5p6440_i2c0_cfg_gpio, -}; - -static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { - .flags = 0, - .bus_num = 1, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, - .cfg_gpio = s5p6440_i2c1_cfg_gpio, -}; - -static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("24c08", 0x50), }, - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = { - /* To be populated */ -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = { - .no = S5P6440_GPF(15), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdk6440_bl_data = { - .pwm_id = 1, - .enable_gpio = -1, -}; - -static void __init smdk6440_map_io(void) -{ - s5p64x0_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void s5p6440_set_lcd_interface(void) -{ - unsigned int cfg; - - /* select TFT LCD type (RGB I/F) */ - cfg = __raw_readl(S5P64X0_SPCON0); - cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK; - cfg |= S5P64X0_SPCON0_LCD_SEL_RGB; - __raw_writel(cfg, S5P64X0_SPCON0); -} - -static void __init smdk6440_machine_init(void) -{ - s3c24xx_ts_set_platdata(NULL); - - s3c_i2c0_set_platdata(&s5p6440_i2c0_data); - s3c_i2c1_set_platdata(&s5p6440_i2c1_data); - i2c_register_board_info(0, smdk6440_i2c_devs0, - ARRAY_SIZE(smdk6440_i2c_devs0)); - i2c_register_board_info(1, smdk6440_i2c_devs1, - ARRAY_SIZE(smdk6440_i2c_devs1)); - - s5p6440_set_lcd_interface(); - s3c_fb_set_platdata(&smdk6440_lcd_pdata); - - s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata); - - platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); - - samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data); -} - -MACHINE_START(SMDK6440, "SMDK6440") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - - .init_irq = s5p6440_init_irq, - .map_io = smdk6440_map_io, - .init_machine = smdk6440_machine_init, - .init_time = samsung_timer_init, - .restart = s5p64x0_restart, -MACHINE_END diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c deleted file mode 100644 index fa1341c074ca..000000000000 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ /dev/null @@ -1,299 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/pwm_backlight.h> -#include <linux/fb.h> -#include <linux/mmc/host.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/pll.h> -#include <plat/adc.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <plat/samsung-time.h> -#include <plat/backlight.h> -#include <plat/fb.h> -#include <plat/sdhci.h> - -#include "common.h" -#include "i2c.h" - -#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2440_UFCON_TXTRIG16 | \ - S3C2410_UFCON_RXTRIG8) - -static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, -#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 - [4] = { - .hwport = 4, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, -#endif -#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 - [5] = { - .hwport = 5, - .flags = 0, - .ucon = SMDK6450_UCON_DEFAULT, - .ulcon = SMDK6450_ULCON_DEFAULT, - .ufcon = SMDK6450_UFCON_DEFAULT, - }, -#endif -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win smdk6450_fb_win0 = { - .max_bpp = 32, - .default_bpp = 24, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdk6450_lcd_timing = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = { - .win[0] = &smdk6450_fb_win0, - .vtiming = &smdk6450_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, -}; - -/* LCD power controller */ -static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd, - unsigned int power) -{ - int err; - - if (power) { - err = gpio_request(S5P6450_GPN(5), "GPN"); - if (err) { - printk(KERN_ERR "failed to request GPN for lcd reset\n"); - return; - } - - gpio_direction_output(S5P6450_GPN(5), 1); - gpio_set_value(S5P6450_GPN(5), 0); - gpio_set_value(S5P6450_GPN(5), 1); - gpio_free(S5P6450_GPN(5)); - } -} - -static struct plat_lcd_data smdk6450_lcd_power_data = { - .set_power = smdk6450_lte480_reset_power, -}; - -static struct platform_device smdk6450_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &smdk6450_lcd_power_data, -}; - -static struct platform_device *smdk6450_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_rtc, - &s3c_device_i2c0, - &s3c_device_i2c1, - &samsung_device_pwm, - &s3c_device_ts, - &s3c_device_wdt, - &s5p6450_device_iis0, - &s3c_device_fb, - &smdk6450_lcd_lte480wv, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - /* s5p6450_device_spi0 will be added */ -}; - -static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -#if defined(CONFIG_S5P64X0_SD_CH1_8BIT) - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_NONE, -}; - -static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { - .flags = 0, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, - .cfg_gpio = s5p6450_i2c0_cfg_gpio, -}; - -static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { - .flags = 0, - .bus_num = 1, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, - .cfg_gpio = s5p6450_i2c1_cfg_gpio, -}; - -static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("wm8580", 0x1b), }, - { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */ -}; - -static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { - { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = { - .no = S5P6450_GPF(15), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdk6450_bl_data = { - .pwm_id = 1, - .enable_gpio = -1, -}; - -static void __init smdk6450_map_io(void) -{ - s5p64x0_init_io(NULL, 0); - s3c24xx_init_clocks(19200000); - s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void s5p6450_set_lcd_interface(void) -{ - unsigned int cfg; - - /* select TFT LCD type (RGB I/F) */ - cfg = __raw_readl(S5P64X0_SPCON0); - cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK; - cfg |= S5P64X0_SPCON0_LCD_SEL_RGB; - __raw_writel(cfg, S5P64X0_SPCON0); -} - -static void __init smdk6450_machine_init(void) -{ - s3c24xx_ts_set_platdata(NULL); - - s3c_i2c0_set_platdata(&s5p6450_i2c0_data); - s3c_i2c1_set_platdata(&s5p6450_i2c1_data); - i2c_register_board_info(0, smdk6450_i2c_devs0, - ARRAY_SIZE(smdk6450_i2c_devs0)); - i2c_register_board_info(1, smdk6450_i2c_devs1, - ARRAY_SIZE(smdk6450_i2c_devs1)); - - s5p6450_set_lcd_interface(); - s3c_fb_set_platdata(&smdk6450_lcd_pdata); - - s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata); - - platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); - - samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data); -} - -MACHINE_START(SMDK6450, "SMDK6450") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - - .init_irq = s5p6450_init_irq, - .map_io = smdk6450_map_io, - .init_machine = smdk6450_machine_init, - .init_time = samsung_timer_init, - .restart = s5p64x0_restart, -MACHINE_END diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c deleted file mode 100644 index ec8229cee716..000000000000 --- a/arch/arm/mach-s5p64x0/pm.c +++ /dev/null @@ -1,202 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/pm.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 Power Management Support - * - * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/suspend.h> -#include <linux/syscore_ops.h> -#include <linux/io.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/wakeup-mask.h> - -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -static struct sleep_save s5p64x0_core_save[] = { - SAVE_ITEM(S5P64X0_APLL_CON), - SAVE_ITEM(S5P64X0_MPLL_CON), - SAVE_ITEM(S5P64X0_EPLL_CON), - SAVE_ITEM(S5P64X0_EPLL_CON_K), - SAVE_ITEM(S5P64X0_CLK_SRC0), - SAVE_ITEM(S5P64X0_CLK_SRC1), - SAVE_ITEM(S5P64X0_CLK_DIV0), - SAVE_ITEM(S5P64X0_CLK_DIV1), - SAVE_ITEM(S5P64X0_CLK_DIV2), - SAVE_ITEM(S5P64X0_CLK_DIV3), - SAVE_ITEM(S5P64X0_CLK_GATE_MEM0), - SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1), - SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1), -}; - -static struct sleep_save s5p64x0_misc_save[] = { - SAVE_ITEM(S5P64X0_AHB_CON0), - SAVE_ITEM(S5P64X0_SPCON0), - SAVE_ITEM(S5P64X0_SPCON1), - SAVE_ITEM(S5P64X0_MEM0CONSLP0), - SAVE_ITEM(S5P64X0_MEM0CONSLP1), - SAVE_ITEM(S5P64X0_MEM0DRVCON), - SAVE_ITEM(S5P64X0_MEM1DRVCON), -}; - -/* DPLL is present only in S5P6450 */ -static struct sleep_save s5p6450_core_save[] = { - SAVE_ITEM(S5P6450_DPLL_CON), - SAVE_ITEM(S5P6450_DPLL_CON_K), -}; - -void s3c_pm_configure_extint(void) -{ - __raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK); -} - -void s3c_pm_restore_core(void) -{ - __raw_writel(0, S5P64X0_EINT_WAKEUP_MASK); - - s3c_pm_do_restore_core(s5p64x0_core_save, - ARRAY_SIZE(s5p64x0_core_save)); - - if (soc_is_s5p6450()) - s3c_pm_do_restore_core(s5p6450_core_save, - ARRAY_SIZE(s5p6450_core_save)); - - s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save)); -} - -void s3c_pm_save_core(void) -{ - s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save)); - - if (soc_is_s5p6450()) - s3c_pm_do_save(s5p6450_core_save, - ARRAY_SIZE(s5p6450_core_save)); - - s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save)); -} - -static int s5p64x0_cpu_suspend(unsigned long arg) -{ - unsigned long tmp = 0; - - /* - * Issue the standby signal into the pm unit. Note, we - * issue a write-buffer drain just in case. - */ - asm("b 1f\n\t" - ".align 5\n\t" - "1:\n\t" - "mcr p15, 0, %0, c7, c10, 5\n\t" - "mcr p15, 0, %0, c7, c10, 4\n\t" - "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp)); - - pr_info("Failed to suspend the system\n"); - return 1; /* Aborting suspend */ -} - -/* mapping of interrupts to parts of the wakeup mask */ -static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = { - { .irq = IRQ_RTC_ALARM, .bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, }, - { .irq = IRQ_RTC_TIC, .bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, }, - { .irq = IRQ_HSMMC0, .bit = S5P64X0_PWR_CFG_MMC0_DISABLE, }, - { .irq = IRQ_HSMMC1, .bit = S5P64X0_PWR_CFG_MMC1_DISABLE, }, -}; - -static void s5p64x0_pm_prepare(void) -{ - u32 tmp; - - samsung_sync_wakemask(S5P64X0_PWR_CFG, - s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs)); - - /* store the resume address in INFORM0 register */ - __raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0); - - /* setup clock gating for FIMGVG block */ - __raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \ - (S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1); - __raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \ - (S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1); - - /* Configure the stabilization counter with wait time required */ - __raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE); - - /* set WFI to SLEEP mode configuration */ - tmp = __raw_readl(S5P64X0_SLEEP_CFG); - tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN); - __raw_writel(tmp, S5P64X0_SLEEP_CFG); - - tmp = __raw_readl(S5P64X0_PWR_CFG); - tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK); - tmp |= S5P64X0_PWR_CFG_WFI_SLEEP; - __raw_writel(tmp, S5P64X0_PWR_CFG); - - /* - * set OTHERS register to disable interrupt before going to - * sleep. This bit is present only in S5P6450, it is reserved - * in S5P6440. - */ - if (soc_is_s5p6450()) { - tmp = __raw_readl(S5P64X0_OTHERS); - tmp |= S5P6450_OTHERS_DISABLE_INT; - __raw_writel(tmp, S5P64X0_OTHERS); - } - - /* ensure previous wakeup state is cleared before sleeping */ - __raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT); - -} - -static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif) -{ - pm_cpu_prep = s5p64x0_pm_prepare; - pm_cpu_sleep = s5p64x0_cpu_suspend; - - return 0; -} - -static struct subsys_interface s5p64x0_pm_interface = { - .name = "s5p64x0_pm", - .subsys = &s5p64x0_subsys, - .add_dev = s5p64x0_pm_add, -}; - -static __init int s5p64x0_pm_drvinit(void) -{ - s3c_pm_init(); - - return subsys_interface_register(&s5p64x0_pm_interface); -} -arch_initcall(s5p64x0_pm_drvinit); - -static void s5p64x0_pm_resume(void) -{ - u32 tmp; - - tmp = __raw_readl(S5P64X0_OTHERS); - tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \ - S5P64X0_OTHERS_RET_UART); - __raw_writel(tmp , S5P64X0_OTHERS); -} - -static struct syscore_ops s5p64x0_pm_syscore_ops = { - .resume = s5p64x0_pm_resume, -}; - -static __init int s5p64x0_pm_syscore_init(void) -{ - register_syscore_ops(&s5p64x0_pm_syscore_ops); - - return 0; -} -arch_initcall(s5p64x0_pm_syscore_init); diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c deleted file mode 100644 index f346ee4af54d..000000000000 --- a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Base S5P64X0 GPIO setup information for LCD framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/fb.h> -#include <linux/gpio.h> - -#include <plat/cpu.h> -#include <plat/fb.h> -#include <plat/gpio-cfg.h> - -void s5p64x0_fb_gpio_setup_24bpp(void) -{ - if (soc_is_s5p6440()) { - s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2)); - } else if (soc_is_s5p6450()) { - s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2)); - s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2)); - } -} diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c deleted file mode 100644 index 569b76ac98cb..000000000000 --- a/arch/arm/mach-s5p64x0/setup-i2c0.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64x0/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include "i2c.h" - -void s5p6440_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6440_GPB(5), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} - -void s5p6450_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6450_GPB(5), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c deleted file mode 100644 index 867374e6d0bc..000000000000 --- a/arch/arm/mach-s5p64x0/setup-i2c1.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * I2C1 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> - -#include "i2c.h" - -void s5p6440_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6440_GPR(9), 2, - S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); -} - -void s5p6450_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6450_GPR(9), 2, - S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); -} - -void s3c_i2c1_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c deleted file mode 100644 index 8410af0d12bf..000000000000 --- a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/regs-gpio.h> -#include <mach/regs-clock.h> - -#include <plat/gpio-cfg.h> -#include <plat/sdhci.h> -#include <plat/cpu.h> - -void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG pins to special-function 2 */ - if (soc_is_s5p6450()) - s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width, - S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width, - S3C_GPIO_SFN(2)); - - /* Set GPG[6] pin to special-function 2 - MMC0 CDn */ - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - if (soc_is_s5p6450()) { - s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2)); - } else { - s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2)); - } - } -} - -void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */ - if (soc_is_s5p6450()) - s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2)); - - switch (width) { - case 8: - /* Set data pins GPH[6:9] special-function 2 */ - if (soc_is_s5p6450()) - s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4, - S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, - S3C_GPIO_SFN(2)); - case 4: - /* set data pins GPH[2:5] special-function 2 */ - if (soc_is_s5p6450()) - s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4, - S3C_GPIO_SFN(2)); - else - s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4, - S3C_GPIO_SFN(2)); - default: - break; - } - - /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */ - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - if (soc_is_s5p6450()) { - s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3)); - } else { - s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3)); - } - } -} - -void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */ - s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3)); - - /* Set data pins GPH[6:9] pins to special-function 3 */ - s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3)); -} - -void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - /* Set all the necessary GPG pins to special-function 3 */ - s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c deleted file mode 100644 index 7664356720ca..000000000000 --- a/arch/arm/mach-s5p64x0/setup-spi.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/setup-spi.c - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -#ifdef CONFIG_S3C64XX_DEV_SPI0 -int s3c64xx_spi0_cfg_gpio(void) -{ - if (soc_is_s5p6450()) - s3c_gpio_cfgall_range(S5P6450_GPC(0), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - else - s3c_gpio_cfgall_range(S5P6440_GPC(0), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -int s3c64xx_spi1_cfg_gpio(void) -{ - if (soc_is_s5p6450()) - s3c_gpio_cfgall_range(S5P6450_GPC(4), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - else - s3c_gpio_cfgall_range(S5P6440_GPC(4), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig deleted file mode 100644 index c5e3a969b063..000000000000 --- a/arch/arm/mach-s5pc100/Kconfig +++ /dev/null @@ -1,81 +0,0 @@ -# Copyright 2009 Samsung Electronics Co. -# Byungho Min <bhmin@samsung.com> -# -# Licensed under GPLv2 - -# Configuration options for the S5PC100 CPU - -if ARCH_S5PC100 - -config CPU_S5PC100 - bool - select ARM_AMBA - select PL330_DMA if DMADEVICES - select S5P_EXT_INT - help - Enable S5PC100 CPU support - -config S5PC100_SETUP_FB_24BPP - bool - help - Common setup code for S5PC1XX with an 24bpp RGB display helper. - -config S5PC100_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S5PC100_SETUP_IDE - bool - help - Common setup code for S5PC100 IDE GPIO configurations - -config S5PC100_SETUP_KEYPAD - bool - help - Common setup code for KEYPAD GPIO configurations. - -config S5PC100_SETUP_SDHCI - bool - select S5PC100_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PC100 based SDHCI systems - -config S5PC100_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config S5PC100_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations. - -config MACH_SMDKC100 - bool "SMDKC100" - select CPU_S5PC100 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5PC100_SETUP_FB_24BPP - select S5PC100_SETUP_I2C1 - select S5PC100_SETUP_IDE - select S5PC100_SETUP_KEYPAD - select S5PC100_SETUP_SDHCI - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDKC100 - -endif diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile deleted file mode 100644 index 118c711f74e8..000000000000 --- a/arch/arm/mach-s5pc100/Makefile +++ /dev/null @@ -1,32 +0,0 @@ -# arch/arm/mach-s5pc100/Makefile -# -# Copyright 2009 Samsung Electronics Co. -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core - -obj-y += common.o clock.o - -obj-y += dma.o - -# machine support - -obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o - -# device support - -obj-y += dev-audio.o - -obj-y += setup-i2c0.o -obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o -obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot deleted file mode 100644 index 79ece4055b02..000000000000 --- a/arch/arm/mach-s5pc100/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c deleted file mode 100644 index d0dc10ee7729..000000000000 --- a/arch/arm/mach-s5pc100/clock.c +++ /dev/null @@ -1,1361 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PC100 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> - -#include "common.h" - -static struct clk s5p_clk_otgphy = { - .name = "otg_phy", -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -static struct clk *clk_src_mout_href_list[] = { - [0] = &s5p_clk_27m, - [1] = &clk_fin_hpll, -}; - -static struct clksrc_sources clk_src_mout_href = { - .sources = clk_src_mout_href_list, - .nr_sources = ARRAY_SIZE(clk_src_mout_href_list), -}; - -static struct clksrc_clk clk_mout_href = { - .clk = { - .name = "mout_href", - }, - .sources = &clk_src_mout_href, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 }, -}; - -static struct clk *clk_src_mout_48m_list[] = { - [0] = &clk_xusbxti, - [1] = &s5p_clk_otgphy, -}; - -static struct clksrc_sources clk_src_mout_48m = { - .sources = clk_src_mout_48m_list, - .nr_sources = ARRAY_SIZE(clk_src_mout_48m_list), -}; - -static struct clksrc_clk clk_mout_48m = { - .clk = { - .name = "mout_48m", - }, - .sources = &clk_src_mout_48m, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, -}; - - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, -}; - -static struct clk *clk_src_mout_hpll_list[] = { - [0] = &s5p_clk_27m, -}; - -static struct clksrc_sources clk_src_mout_hpll = { - .sources = clk_src_mout_hpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mout_hpll_list), -}; - -static struct clksrc_clk clk_mout_hpll = { - .clk = { - .name = "mout_hpll", - }, - .sources = &clk_src_mout_hpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, -}; - -static struct clksrc_clk clk_div_apll = { - .clk = { - .name = "div_apll", - .parent = &clk_mout_apll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_div_arm = { - .clk = { - .name = "div_arm", - .parent = &clk_div_apll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk clk_div_d0_bus = { - .clk = { - .name = "div_d0_bus", - .parent = &clk_div_arm.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk clk_div_pclkd0 = { - .clk = { - .name = "div_pclkd0", - .parent = &clk_div_d0_bus.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk clk_div_secss = { - .clk = { - .name = "div_secss", - .parent = &clk_div_d0_bus.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk clk_div_apll2 = { - .clk = { - .name = "div_apll2", - .parent = &clk_mout_apll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 }, -}; - -static struct clk *clk_src_mout_am_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_div_apll2.clk, -}; - -static struct clksrc_sources clk_src_mout_am = { - .sources = clk_src_mout_am_list, - .nr_sources = ARRAY_SIZE(clk_src_mout_am_list), -}; - -static struct clksrc_clk clk_mout_am = { - .clk = { - .name = "mout_am", - }, - .sources = &clk_src_mout_am, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk clk_div_d1_bus = { - .clk = { - .name = "div_d1_bus", - .parent = &clk_mout_am.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk clk_div_mpll2 = { - .clk = { - .name = "div_mpll2", - .parent = &clk_mout_am.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk clk_div_mpll = { - .clk = { - .name = "div_mpll", - .parent = &clk_mout_am.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 }, -}; - -static struct clk *clk_src_mout_onenand_list[] = { - [0] = &clk_div_d0_bus.clk, - [1] = &clk_div_d1_bus.clk, -}; - -static struct clksrc_sources clk_src_mout_onenand = { - .sources = clk_src_mout_onenand_list, - .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list), -}; - -static struct clksrc_clk clk_mout_onenand = { - .clk = { - .name = "mout_onenand", - }, - .sources = &clk_src_mout_onenand, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 }, -}; - -static struct clksrc_clk clk_div_onenand = { - .clk = { - .name = "div_onenand", - .parent = &clk_mout_onenand.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 }, -}; - -static struct clksrc_clk clk_div_pclkd1 = { - .clk = { - .name = "div_pclkd1", - .parent = &clk_div_d1_bus.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk clk_div_cam = { - .clk = { - .name = "div_cam", - .parent = &clk_div_mpll2.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 }, -}; - -static struct clksrc_clk clk_div_hdmi = { - .clk = { - .name = "div_hdmi", - .parent = &clk_mout_hpll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 }, -}; - -static u32 epll_div[][4] = { - { 32750000, 131, 3, 4 }, - { 32768000, 131, 3, 4 }, - { 36000000, 72, 3, 3 }, - { 45000000, 90, 3, 3 }, - { 45158000, 90, 3, 3 }, - { 45158400, 90, 3, 3 }, - { 48000000, 96, 3, 3 }, - { 49125000, 131, 4, 3 }, - { 49152000, 131, 4, 3 }, - { 60000000, 120, 3, 3 }, - { 67737600, 226, 5, 3 }, - { 67738000, 226, 5, 3 }, - { 73800000, 246, 5, 3 }, - { 73728000, 246, 5, 3 }, - { 72000000, 144, 3, 3 }, - { 84000000, 168, 3, 3 }, - { 96000000, 96, 3, 2 }, - { 144000000, 144, 3, 2 }, - { 192000000, 96, 3, 1 } -}; - -static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P_EPLL_CON); - - epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) | - (epll_div[i][2] << PLL65XX_PDIV_SHIFT) | - (epll_div[i][3] << PLL65XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P_EPLL_CON); - - printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", - clk->rate, rate); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5pc100_epll_ops = { - .get_rate = s5p_epll_get_rate, - .set_rate = s5pc100_epll_set_rate, -}; - -static int s5pc100_d0_0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable); -} - -static int s5pc100_d0_1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable); -} - -static int s5pc100_d0_2_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable); -} - -static int s5pc100_d1_0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable); -} - -static int s5pc100_d1_1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable); -} - -static int s5pc100_d1_2_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable); -} - -static int s5pc100_d1_3_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable); -} - -static int s5pc100_d1_4_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable); -} - -static int s5pc100_d1_5_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable); -} - -static int s5pc100_sclk0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable); -} - -static int s5pc100_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable); -} - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_off[] = { - { - .name = "cssys", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_0_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "secss", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_0_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "g2d", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_0_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "mdma", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "cfcon", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_0_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "nfcon", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_1_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "onenandc", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_1_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "sdm", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_2_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "seckey", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_2_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "modemif", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "otg", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "usbhost", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "dma", - .devname = "dma-pl330.1", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "dma", - .devname = "dma-pl330.0", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "lcd", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "rotator", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_1_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "fimc", - .devname = "s5p-fimc.0", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_1_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "fimc", - .devname = "s5p-fimc.1", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_1_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "fimc", - .devname = "s5p-fimc.2", - .enable = s5pc100_d1_1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "jpeg", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_1_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "mipi-dsim", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_1_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "mipi-csis", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_1_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "g3d", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "tv", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_2_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "vp", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_2_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "mixer", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_2_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "hdmi", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_2_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "mfc", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_2_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "apc", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_3_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "iec", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_3_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "systimer", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_3_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "watchdog", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_3_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "rtc", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_3_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "spi", - .devname = "s5pc100-spi.0", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "spi", - .devname = "s5pc100-spi.1", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "spi", - .devname = "s5pc100-spi.2", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "irda", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "ccan", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "ccan", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "hsitx", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "hsirx", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "ac97", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "pcm", - .devname = "samsung-pcm.0", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "pcm", - .devname = "samsung-pcm.1", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "spdif", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "adc", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "keypad", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.0", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.1", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "mmc_48m", - .devname = "s3c-sdhci.2", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 17), - }, -}; - -static struct clk clk_hsmmc2 = { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 7), -}; - -static struct clk clk_hsmmc1 = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 6), -}; - -static struct clk clk_hsmmc0 = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_0_ctrl, - .ctrlbit = (1 << 5), -}; - -static struct clk clk_48m_spi0 = { - .name = "spi_48m", - .devname = "s5pc100-spi.0", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 7), -}; - -static struct clk clk_48m_spi1 = { - .name = "spi_48m", - .devname = "s5pc100-spi.1", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 8), -}; - -static struct clk clk_48m_spi2 = { - .name = "spi_48m", - .devname = "s5pc100-spi.2", - .parent = &clk_mout_48m.clk, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = (1 << 9), -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 0), -}; - -static struct clk clk_i2s1 = { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 1), -}; - -static struct clk clk_i2s2 = { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_div_pclkd1.clk, - .enable = s5pc100_d1_5_ctrl, - .ctrlbit = (1 << 2), -}; - -static struct clk clk_vclk54m = { - .name = "vclk_54m", - .rate = 54000000, -}; - -static struct clk clk_i2scdclk0 = { - .name = "i2s_cdclk0", -}; - -static struct clk clk_i2scdclk1 = { - .name = "i2s_cdclk1", -}; - -static struct clk clk_i2scdclk2 = { - .name = "i2s_cdclk2", -}; - -static struct clk clk_pcmcdclk0 = { - .name = "pcm_cdclk0", -}; - -static struct clk clk_pcmcdclk1 = { - .name = "pcm_cdclk1", -}; - -static struct clk *clk_src_group1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll2.clk, - [2] = &clk_fin_epll, - [3] = &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clk_src_group1 = { - .sources = clk_src_group1_list, - .nr_sources = ARRAY_SIZE(clk_src_group1_list), -}; - -static struct clk *clk_src_group2_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll.clk, -}; - -static struct clksrc_sources clk_src_group2 = { - .sources = clk_src_group2_list, - .nr_sources = ARRAY_SIZE(clk_src_group2_list), -}; - -static struct clk *clk_src_group3_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll.clk, - [2] = &clk_fin_epll, - [3] = &clk_i2scdclk0, - [4] = &clk_pcmcdclk0, - [5] = &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clk_src_group3 = { - .sources = clk_src_group3_list, - .nr_sources = ARRAY_SIZE(clk_src_group3_list), -}; - -static struct clksrc_clk clk_sclk_audio0 = { - .clk = { - .name = "sclk_audio", - .devname = "samsung-pcm.0", - .ctrlbit = (1 << 8), - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clk_src_group3, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, -}; - -static struct clk *clk_src_group4_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll.clk, - [2] = &clk_fin_epll, - [3] = &clk_i2scdclk1, - [4] = &clk_pcmcdclk1, - [5] = &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clk_src_group4 = { - .sources = clk_src_group4_list, - .nr_sources = ARRAY_SIZE(clk_src_group4_list), -}; - -static struct clksrc_clk clk_sclk_audio1 = { - .clk = { - .name = "sclk_audio", - .devname = "samsung-pcm.1", - .ctrlbit = (1 << 9), - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clk_src_group4, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, -}; - -static struct clk *clk_src_group5_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll.clk, - [2] = &clk_fin_epll, - [3] = &clk_i2scdclk2, - [4] = &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clk_src_group5 = { - .sources = clk_src_group5_list, - .nr_sources = ARRAY_SIZE(clk_src_group5_list), -}; - -static struct clksrc_clk clk_sclk_audio2 = { - .clk = { - .name = "sclk_audio", - .devname = "samsung-pcm.2", - .ctrlbit = (1 << 10), - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clk_src_group5, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, -}; - -static struct clk *clk_src_group6_list[] = { - [0] = &s5p_clk_27m, - [1] = &clk_vclk54m, - [2] = &clk_div_hdmi.clk, -}; - -static struct clksrc_sources clk_src_group6 = { - .sources = clk_src_group6_list, - .nr_sources = ARRAY_SIZE(clk_src_group6_list), -}; - -static struct clk *clk_src_group7_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll.clk, - [2] = &clk_mout_hpll.clk, - [3] = &clk_vclk54m, -}; - -static struct clksrc_sources clk_src_group7 = { - .sources = clk_src_group7_list, - .nr_sources = ARRAY_SIZE(clk_src_group7_list), -}; - -static struct clk *clk_src_mmc0_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll.clk, - [2] = &clk_fin_epll, -}; - -static struct clksrc_sources clk_src_mmc0 = { - .sources = clk_src_mmc0_list, - .nr_sources = ARRAY_SIZE(clk_src_mmc0_list), -}; - -static struct clk *clk_src_mmc12_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll.clk, - [2] = &clk_fin_epll, - [3] = &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clk_src_mmc12 = { - .sources = clk_src_mmc12_list, - .nr_sources = ARRAY_SIZE(clk_src_mmc12_list), -}; - -static struct clk *clk_src_irda_usb_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_div_mpll.clk, - [2] = &clk_fin_epll, - [3] = &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clk_src_irda_usb = { - .sources = clk_src_irda_usb_list, - .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list), -}; - -static struct clk *clk_src_pwi_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_mout_epll.clk, - [2] = &clk_div_mpll.clk, -}; - -static struct clksrc_sources clk_src_pwi = { - .sources = clk_src_pwi_list, - .nr_sources = ARRAY_SIZE(clk_src_pwi_list), -}; - -static struct clk *clk_sclk_spdif_list[] = { - [0] = &clk_sclk_audio0.clk, - [1] = &clk_sclk_audio1.clk, - [2] = &clk_sclk_audio2.clk, -}; - -static struct clksrc_sources clk_src_sclk_spdif = { - .sources = clk_sclk_spdif_list, - .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list), -}; - -static struct clksrc_clk clk_sclk_spdif = { - .clk = { - .name = "sclk_spdif", - .ctrlbit = (1 << 11), - .enable = s5pc100_sclk1_ctrl, - .ops = &s5p_sclk_spdif_ops, - }, - .sources = &clk_src_sclk_spdif, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 }, -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_mixer", - .ctrlbit = (1 << 6), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_group6, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 }, - }, { - .clk = { - .name = "sclk_lcd", - .ctrlbit = (1 << 0), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group7, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "s5p-fimc.0", - .ctrlbit = (1 << 1), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group7, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "s5p-fimc.1", - .ctrlbit = (1 << 2), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group7, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "s5p-fimc.2", - .ctrlbit = (1 << 3), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group7, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_irda", - .ctrlbit = (1 << 10), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_irda_usb, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_irda", - .ctrlbit = (1 << 10), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_mmc12, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_pwi", - .ctrlbit = (1 << 1), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_pwi, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 }, - }, { - .clk = { - .name = "sclk_uhost", - .ctrlbit = (1 << 11), - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clk_src_irda_usb, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 }, - }, -}; - -static struct clksrc_clk clk_sclk_uart = { - .clk = { - .name = "uclk1", - .ctrlbit = (1 << 3), - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clk_src_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 12), - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clk_src_mmc0, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 13), - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clk_src_mmc12, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 14), - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clk_src_mmc12, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "s5pc100-spi.0", - .ctrlbit = (1 << 4), - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "s5pc100-spi.1", - .ctrlbit = (1 << 5), - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi2 = { - .clk = { - .name = "sclk_spi", - .devname = "s5pc100-spi.2", - .ctrlbit = (1 << 6), - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clk_src_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 }, -}; - -/* Clock initialisation code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_mout_hpll, - &clk_mout_href, - &clk_mout_48m, - &clk_div_apll, - &clk_div_arm, - &clk_div_d0_bus, - &clk_div_pclkd0, - &clk_div_secss, - &clk_div_apll2, - &clk_mout_am, - &clk_div_d1_bus, - &clk_div_mpll2, - &clk_div_mpll, - &clk_mout_onenand, - &clk_div_onenand, - &clk_div_pclkd1, - &clk_div_cam, - &clk_div_hdmi, - &clk_sclk_audio0, - &clk_sclk_audio1, - &clk_sclk_audio2, - &clk_sclk_spdif, -}; - -static struct clk *clk_cdev[] = { - &clk_hsmmc0, - &clk_hsmmc1, - &clk_hsmmc2, - &clk_48m_spi0, - &clk_48m_spi1, - &clk_48m_spi2, - &clk_i2s0, - &clk_i2s1, - &clk_i2s2, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uart, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_sclk_spi2, -}; - -void __init_or_cpufreq s5pc100_setup_clocks(void) -{ - unsigned long xtal; - unsigned long arm; - unsigned long hclkd0; - unsigned long hclkd1; - unsigned long pclkd0; - unsigned long pclkd1; - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long hpll; - unsigned int ptr; - - /* Set S5PC100 functions for clk_fout_epll */ - clk_fout_epll.enable = s5p_epll_enable; - clk_fout_epll.ops = &s5pc100_epll_ops; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal = clk_get_rate(&clk_xtal); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON)); - mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON)); - epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON)); - hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON)); - - printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll)); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_mout_hpll.clk.rate = hpll; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); - - arm = clk_get_rate(&clk_div_arm.clk); - hclkd0 = clk_get_rate(&clk_div_d0_bus.clk); - pclkd0 = clk_get_rate(&clk_div_pclkd0.clk); - hclkd1 = clk_get_rate(&clk_div_d1_bus.clk); - pclkd1 = clk_get_rate(&clk_div_pclkd1.clk); - - printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n", - print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1)); - - clk_f.rate = arm; - clk_h.rate = hclkd1; - clk_p.rate = pclkd1; -} - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "tzic", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_0_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "intc", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_0_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "ebi", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_1_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "intmem", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "sromc", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_1_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "dmc", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "chipid", - .parent = &clk_div_d0_bus.clk, - .enable = s5pc100_d0_1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "gpio", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_3_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_4_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "timers", - .parent = &clk_div_d1_bus.clk, - .enable = s5pc100_d1_3_ctrl, - .ctrlbit = (1 << 6), - }, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_i2scdclk0, - &clk_i2scdclk1, - &clk_i2scdclk2, - &clk_pcmcdclk0, - &clk_pcmcdclk1, -}; - -static struct clk_lookup s5pc100_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0), - CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk), - CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1), - CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk), - CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2), - CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), -}; - -void __init s5pc100_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) - s3c_register_clksrc(clksrc_cdev[ptr], 1); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup)); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) - s3c_disable_clocks(clk_cdev[ptr], 1); - - s3c24xx_register_clock(&dummy_apb_pclk); -} diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c deleted file mode 100644 index 6a41bf7dacf6..000000000000 --- a/arch/arm/mach-s5pc100/common.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Common Codes for S5PC100 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <clocksource/samsung_pwm.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/reboot.h> - -#include <asm/irq.h> -#include <asm/proc-fns.h> -#include <asm/system_misc.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/map.h> -#include <mach/hardware.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/sdhci.h> -#include <plat/adc-core.h> -#include <plat/ata-core.h> -#include <plat/fb-core.h> -#include <plat/iic-core.h> -#include <plat/onenand-core.h> -#include <plat/pwm-core.h> -#include <plat/spi-core.h> -#include <plat/watchdog-reset.h> - -#include "common.h" - -static const char name_s5pc100[] = "S5PC100"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = S5PC100_CPU_ID, - .idmask = S5PC100_CPU_MASK, - .map_io = s5pc100_map_io, - .init_clocks = s5pc100_init_clocks, - .init_uarts = s5pc100_init_uarts, - .init = s5pc100_init, - .name = name_s5pc100, - }, -}; - -/* Initial IO mappings */ - -static struct map_desc s5pc100_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(S5PC100_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S5PC100_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S5PC100_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5PC100_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5PC100_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5PC100_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5PC100_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5PC100_PA_VIC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC100_VA_OTHERS, - .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), - .length = SZ_4K, - .type = MT_DEVICE, - } -}; - -static struct samsung_pwm_variant s5pc100_pwm_variant = { - .bits = 32, - .div_base = 0, - .has_tint_cstat = true, - .tclk_mask = (1 << 5), -}; - -void __init samsung_set_timer_source(unsigned int event, unsigned int source) -{ - s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); -} - -void __init samsung_timer_init(void) -{ - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, - IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, - }; - - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &s5pc100_pwm_variant); -} - -/* - * s5pc100_map_io - * - * register the standard CPU IO areas - */ - -void __init s5pc100_init_io(struct map_desc *mach_desc, int size) -{ - /* initialize the io descriptors we need for initialization */ - iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); - if (mach_desc) - iotable_init(mach_desc, size); - - /* detect cpu id and rev. */ - s5p_init_cpu(S5P_VA_CHIPID); - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); - - samsung_pwm_set_platdata(&s5pc100_pwm_variant); -} - -void __init s5pc100_map_io(void) -{ - /* initialise device information early */ - s5pc100_default_sdhci0(); - s5pc100_default_sdhci1(); - s5pc100_default_sdhci2(); - - s3c_adc_setname("s3c64xx-adc"); - - /* the i2c devices are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - - s3c_onenand_setname("s5pc100-onenand"); - s3c_fb_setname("s5pc100-fb"); - s3c_cfcon_setname("s5pc100-pata"); - - s3c64xx_spi_setname("s5pc100-spi"); -} - -void __init s5pc100_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5pc100_register_clocks(); - s5pc100_setup_clocks(); - samsung_wdt_reset_init(S3C_VA_WATCHDOG); -} - -void __init s5pc100_init_irq(void) -{ - u32 vic[] = {~0, ~0, ~0}; - - /* VIC0, VIC1, and VIC2 are fully populated. */ - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -static struct bus_type s5pc100_subsys = { - .name = "s5pc100-core", - .dev_name = "s5pc100-core", -}; - -static struct device s5pc100_dev = { - .bus = &s5pc100_subsys, -}; - -static int __init s5pc100_core_init(void) -{ - return subsys_system_register(&s5pc100_subsys, NULL); -} -core_initcall(s5pc100_core_init); - -int __init s5pc100_init(void) -{ - printk(KERN_INFO "S5PC100: Initializing architecture\n"); - return device_register(&s5pc100_dev); -} - -/* uart registration process */ - -void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} - -void s5pc100_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode != REBOOT_SOFT) - samsung_wdt_reset(); - - soft_restart(0); -} diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h deleted file mode 100644 index 08d782d65d7b..000000000000 --- a/arch/arm/mach-s5pc100/common.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S5PC100 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H -#define __ARCH_ARM_MACH_S5PC100_COMMON_H - -#include <linux/reboot.h> - -void s5pc100_init_io(struct map_desc *mach_desc, int size); -void s5pc100_init_irq(void); - -void s5pc100_register_clocks(void); -void s5pc100_setup_clocks(void); - -void s5pc100_restart(enum reboot_mode mode, const char *cmd); - -extern int s5pc100_init(void); -extern void s5pc100_map_io(void); -extern void s5pc100_init_clocks(int xtal); -extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */ diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c deleted file mode 100644 index 46f488b09391..000000000000 --- a/arch/arm/mach-s5pc100/dev-audio.c +++ /dev/null @@ -1,239 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5pc100_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 0: /* Dedicated pins */ - break; - case 1: - s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2)); - break; - case 2: - s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata i2sv5_pdata = { - .cfg_gpio = s5pc100_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI - | QUIRK_NEED_RSTCLR, - }, - }, -}; - -static struct resource s5pc100_iis0_resource[] = { - [0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), - [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), -}; - -struct platform_device s5pc100_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5pc100_iis0_resource), - .resource = s5pc100_iis0_resource, - .dev = { - .platform_data = &i2sv5_pdata, - }, -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5pc100_cfg_i2s, -}; - -static struct resource s5pc100_iis1_resource[] = { - [0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), -}; - -struct platform_device s5pc100_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5pc100_iis1_resource), - .resource = s5pc100_iis1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -static struct resource s5pc100_iis2_resource[] = { - [0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), -}; - -struct platform_device s5pc100_device_iis2 = { - .name = "samsung-i2s", - .id = 2, - .num_resources = ARRAY_SIZE(s5pc100_iis2_resource), - .resource = s5pc100_iis2_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5)); - break; - - case 1: - s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3)); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5pc100_pcm_cfg_gpio, -}; - -static struct resource s5pc100_pcm0_resource[] = { - [0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), -}; - -struct platform_device s5pc100_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource), - .resource = s5pc100_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5pc100_pcm1_resource[] = { - [0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), -}; - -struct platform_device s5pc100_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource), - .resource = s5pc100_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -/* AC97 Controller platform devices */ - -static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev) -{ - return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4)); -} - -static struct resource s5pc100_ac97_resource[] = { - [0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), - [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), - [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), - [4] = DEFINE_RES_IRQ(IRQ_AC97), -}; - -static struct s3c_audio_pdata s3c_ac97_pdata = { - .cfg_gpio = s5pc100_ac97_cfg_gpio, -}; - -static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pc100_device_ac97 = { - .name = "samsung-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(s5pc100_ac97_resource), - .resource = s5pc100_ac97_resource, - .dev = { - .platform_data = &s3c_ac97_pdata, - .dma_mask = &s5pc100_ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* S/PDIF Controller platform_device */ -static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev) -{ - s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3)); - - return 0; -} - -static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev) -{ - s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3)); - - return 0; -} - -static struct resource s5pc100_spdif_resource[] = { - [0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPDIF), -}; - -static struct s3c_audio_pdata s5p_spdif_pdata = { - .cfg_gpio = s5pc100_spdif_cfg_gpd, -}; - -static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pc100_device_spdif = { - .name = "samsung-spdif", - .id = -1, - .num_resources = ARRAY_SIZE(s5pc100_spdif_resource), - .resource = s5pc100_spdif_resource, - .dev = { - .platform_data = &s5p_spdif_pdata, - .dma_mask = &s5pc100_spdif_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init s5pc100_spdif_setup_gpio(int gpio) -{ - if (gpio == S5PC100_SPDIF_GPD) - s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd; - else - s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3; -} diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c deleted file mode 100644 index b1418409709e..000000000000 --- a/arch/arm/mach-s5pc100/dma.c +++ /dev/null @@ -1,130 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/dma.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl330.h> - -#include <asm/irq.h> -#include <plat/devs.h> -#include <plat/irqs.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/dma.h> - -static u8 pdma0_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_IRDA, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S0S_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_EXTERNAL, - DMACH_PWM, - DMACH_SPDIF, - DMACH_HSI_RX, - DMACH_HSI_TX, -}; - -static struct dma_pl330_platdata s5pc100_pdma0_pdata = { - .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri_id = pdma0_peri, -}; - -static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, - S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata); - -static u8 pdma1_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_IRDA, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S0S_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MSM_REQ0, - DMACH_MSM_REQ1, - DMACH_MSM_REQ2, - DMACH_MSM_REQ3, -}; - -static struct dma_pl330_platdata s5pc100_pdma1_pdata = { - .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri_id = pdma1_peri, -}; - -static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, - S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata); - -static int __init s5pc100_dma_init(void) -{ - dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); - amba_device_register(&s5pc100_pdma0_device, &iomem_resource); - - dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); - amba_device_register(&s5pc100_pdma1_device, &iomem_resource); - - return 0; -} -arch_initcall(s5pc100_dma_init); diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S deleted file mode 100644 index 22c23859e45e..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/debug-macro.S - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * - * Based on mach-s3c6400/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <linux/serial_s3c.h> -#include <mach/map.h> - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S deleted file mode 100644 index bad0700457db..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/entry-macro.S - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Based on mach-s3c6400/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for the Samsung S5PC1XX series - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - .endm diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h deleted file mode 100644 index 5e1a924b595f..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ /dev/null @@ -1,144 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/gpio.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - GPIO lib support - * - * Base on mach-s3c6400/include/mach/gpio.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -/* GPIO bank sizes */ -#define S5PC100_GPIO_A0_NR (8) -#define S5PC100_GPIO_A1_NR (5) -#define S5PC100_GPIO_B_NR (8) -#define S5PC100_GPIO_C_NR (5) -#define S5PC100_GPIO_D_NR (7) -#define S5PC100_GPIO_E0_NR (8) -#define S5PC100_GPIO_E1_NR (6) -#define S5PC100_GPIO_F0_NR (8) -#define S5PC100_GPIO_F1_NR (8) -#define S5PC100_GPIO_F2_NR (8) -#define S5PC100_GPIO_F3_NR (4) -#define S5PC100_GPIO_G0_NR (8) -#define S5PC100_GPIO_G1_NR (3) -#define S5PC100_GPIO_G2_NR (7) -#define S5PC100_GPIO_G3_NR (7) -#define S5PC100_GPIO_H0_NR (8) -#define S5PC100_GPIO_H1_NR (8) -#define S5PC100_GPIO_H2_NR (8) -#define S5PC100_GPIO_H3_NR (8) -#define S5PC100_GPIO_I_NR (8) -#define S5PC100_GPIO_J0_NR (8) -#define S5PC100_GPIO_J1_NR (5) -#define S5PC100_GPIO_J2_NR (8) -#define S5PC100_GPIO_J3_NR (8) -#define S5PC100_GPIO_J4_NR (4) -#define S5PC100_GPIO_K0_NR (8) -#define S5PC100_GPIO_K1_NR (6) -#define S5PC100_GPIO_K2_NR (8) -#define S5PC100_GPIO_K3_NR (8) -#define S5PC100_GPIO_L0_NR (8) -#define S5PC100_GPIO_L1_NR (8) -#define S5PC100_GPIO_L2_NR (8) -#define S5PC100_GPIO_L3_NR (8) -#define S5PC100_GPIO_L4_NR (8) - -/* GPIO bank numbes */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5PC100_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5PC100_GPIO_A0_START = 0, - S5PC100_GPIO_A1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A0), - S5PC100_GPIO_B_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A1), - S5PC100_GPIO_C_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_B), - S5PC100_GPIO_D_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_C), - S5PC100_GPIO_E0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_D), - S5PC100_GPIO_E1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E0), - S5PC100_GPIO_F0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E1), - S5PC100_GPIO_F1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F0), - S5PC100_GPIO_F2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F1), - S5PC100_GPIO_F3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F2), - S5PC100_GPIO_G0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F3), - S5PC100_GPIO_G1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G0), - S5PC100_GPIO_G2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G1), - S5PC100_GPIO_G3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G2), - S5PC100_GPIO_H0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G3), - S5PC100_GPIO_H1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H0), - S5PC100_GPIO_H2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H1), - S5PC100_GPIO_H3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H2), - S5PC100_GPIO_I_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H3), - S5PC100_GPIO_J0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_I), - S5PC100_GPIO_J1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J0), - S5PC100_GPIO_J2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J1), - S5PC100_GPIO_J3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J2), - S5PC100_GPIO_J4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J3), - S5PC100_GPIO_K0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J4), - S5PC100_GPIO_K1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K0), - S5PC100_GPIO_K2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K1), - S5PC100_GPIO_K3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K2), - S5PC100_GPIO_L0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K3), - S5PC100_GPIO_L1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L0), - S5PC100_GPIO_L2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L1), - S5PC100_GPIO_L3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L2), - S5PC100_GPIO_L4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L3), - S5PC100_GPIO_END = S5PC100_GPIO_NEXT(S5PC100_GPIO_L4), -}; - -/* S5PC100 GPIO number definitions. */ -#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr)) -#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr)) -#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr)) -#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr)) -#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr)) -#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr)) -#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr)) -#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr)) -#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr)) -#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr)) -#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr)) -#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr)) -#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr)) -#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr)) -#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr)) -#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr)) -#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr)) -#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr)) -#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr)) -#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr)) -#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr)) -#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr)) -#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr)) -#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr)) -#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr)) -#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr)) -#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr)) -#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr)) -#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr)) -#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr)) -#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr)) -#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr)) -#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr)) -#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr)) - -/* It used the end of the S5PC100 gpios */ -#define S3C_GPIO_END S5PC100_GPIO_END - -/* define the number of gpios we need to the one after the MP04() range */ -#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h deleted file mode 100644 index 6b38618c2fd9..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/hardware.h +++ /dev/null @@ -1,14 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - Hardware support - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h deleted file mode 100644 index d2eb4757381f..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ /dev/null @@ -1,115 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - IRQ definitions - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* VIC0: system, DMA, timer */ -#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) -#define IRQ_BATF S5P_IRQ_VIC0(17) -#define IRQ_MDMA S5P_IRQ_VIC0(18) -#define IRQ_PDMA0 S5P_IRQ_VIC0(19) -#define IRQ_PDMA1 S5P_IRQ_VIC0(20) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) -#define IRQ_WDT S5P_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) -#define IRQ_GPIOINT S5P_IRQ_VIC0(30) - -/* VIC1: ARM, power, memory, connectivity */ -#define IRQ_PMU S5P_IRQ_VIC1(0) -#define IRQ_CORTEX1 S5P_IRQ_VIC1(1) -#define IRQ_CORTEX2 S5P_IRQ_VIC1(2) -#define IRQ_CORTEX3 S5P_IRQ_VIC1(3) -#define IRQ_CORTEX4 S5P_IRQ_VIC1(4) -#define IRQ_IEMAPC S5P_IRQ_VIC1(5) -#define IRQ_IEMIEC S5P_IRQ_VIC1(6) -#define IRQ_ONENAND S5P_IRQ_VIC1(7) -#define IRQ_NFC S5P_IRQ_VIC1(8) -#define IRQ_CFCON S5P_IRQ_VIC1(9) -#define IRQ_UART0 S5P_IRQ_VIC1(10) -#define IRQ_UART1 S5P_IRQ_VIC1(11) -#define IRQ_UART2 S5P_IRQ_VIC1(12) -#define IRQ_UART3 S5P_IRQ_VIC1(13) -#define IRQ_IIC S5P_IRQ_VIC1(14) -#define IRQ_SPI0 S5P_IRQ_VIC1(15) -#define IRQ_SPI1 S5P_IRQ_VIC1(16) -#define IRQ_SPI2 S5P_IRQ_VIC1(17) -#define IRQ_IRDA S5P_IRQ_VIC1(18) -#define IRQ_IIC2 S5P_IRQ_VIC1(19) -#define IRQ_IIC3 S5P_IRQ_VIC1(20) -#define IRQ_HSIRX S5P_IRQ_VIC1(21) -#define IRQ_HSITX S5P_IRQ_VIC1(22) -#define IRQ_UHOST S5P_IRQ_VIC1(23) -#define IRQ_OTG S5P_IRQ_VIC1(24) -#define IRQ_MSM S5P_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_MIPICSI S5P_IRQ_VIC1(29) -#define IRQ_MIPIDSI S5P_IRQ_VIC1(30) - -/* VIC2: multimedia, audio, security */ -#define IRQ_LCD0 S5P_IRQ_VIC2(0) -#define IRQ_LCD1 S5P_IRQ_VIC2(1) -#define IRQ_LCD2 S5P_IRQ_VIC2(2) -#define IRQ_LCD3 S5P_IRQ_VIC2(3) -#define IRQ_ROTATOR S5P_IRQ_VIC2(4) -#define IRQ_FIMC0 S5P_IRQ_VIC2(5) -#define IRQ_FIMC1 S5P_IRQ_VIC2(6) -#define IRQ_FIMC2 S5P_IRQ_VIC2(7) -#define IRQ_JPEG S5P_IRQ_VIC2(8) -#define IRQ_2D S5P_IRQ_VIC2(9) -#define IRQ_3D S5P_IRQ_VIC2(10) -#define IRQ_MIXER S5P_IRQ_VIC2(11) -#define IRQ_HDMI S5P_IRQ_VIC2(12) -#define IRQ_IIC1 S5P_IRQ_VIC2(13) -#define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) -#define IRQ_I2S0 S5P_IRQ_VIC2(16) -#define IRQ_I2S1 S5P_IRQ_VIC2(17) -#define IRQ_I2S2 S5P_IRQ_VIC2(18) -#define IRQ_AC97 S5P_IRQ_VIC2(19) -#define IRQ_PCM0 S5P_IRQ_VIC2(20) -#define IRQ_PCM1 S5P_IRQ_VIC2(21) -#define IRQ_SPDIF S5P_IRQ_VIC2(22) -#define IRQ_ADC S5P_IRQ_VIC2(23) -#define IRQ_PENDN S5P_IRQ_VIC2(24) -#define IRQ_TC IRQ_PENDN -#define IRQ_KEYPAD S5P_IRQ_VIC2(25) -#define IRQ_CG S5P_IRQ_VIC2(26) -#define IRQ_SEC S5P_IRQ_VIC2(27) -#define IRQ_SECRX S5P_IRQ_VIC2(28) -#define IRQ_SECTX S5P_IRQ_VIC2(29) -#define IRQ_SDMIRQ S5P_IRQ_VIC2(30) -#define IRQ_SDMFIQ S5P_IRQ_VIC2(31) -#define IRQ_VIC_END S5P_IRQ_VIC2(31) - -#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) -#define S5P_EINT_BASE2 (IRQ_VIC_END + 1) - -/* GPIO interrupt */ -#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) -#define S5P_GPIOINT_GROUP_MAXNR 21 - -/* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) - -/* Compatibility */ -#define IRQ_LCD_FIFO IRQ_LCD0 -#define IRQ_LCD_VSYNC IRQ_LCD1 -#define IRQ_LCD_SYSTEM IRQ_LCD2 - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h deleted file mode 100644 index 2550b6112b82..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ /dev/null @@ -1,137 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/map.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5PC100_PA_SDRAM 0x20000000 - -#define S5PC100_PA_ONENAND 0xE7100000 -#define S5PC100_PA_ONENAND_BUF 0xB0000000 - -#define S5PC100_PA_CHIPID 0xE0000000 - -#define S5PC100_PA_SYSCON 0xE0100000 - -#define S5PC100_PA_OTHERS 0xE0200000 - -#define S5PC100_PA_GPIO 0xE0300000 - -#define S5PC100_PA_VIC0 0xE4000000 -#define S5PC100_PA_VIC1 0xE4100000 -#define S5PC100_PA_VIC2 0xE4200000 - -#define S5PC100_PA_SROMC 0xE7000000 - -#define S5PC100_PA_CFCON 0xE7800000 - -#define S5PC100_PA_MDMA 0xE8100000 -#define S5PC100_PA_PDMA0 0xE9000000 -#define S5PC100_PA_PDMA1 0xE9200000 - -#define S5PC100_PA_TIMER 0xEA000000 -#define S5PC100_PA_SYSTIMER 0xEA100000 -#define S5PC100_PA_WATCHDOG 0xEA200000 -#define S5PC100_PA_RTC 0xEA300000 - -#define S5PC100_PA_UART 0xEC000000 - -#define S5PC100_PA_IIC0 0xEC100000 -#define S5PC100_PA_IIC1 0xEC200000 - -#define S5PC100_PA_SPI0 0xEC300000 -#define S5PC100_PA_SPI1 0xEC400000 -#define S5PC100_PA_SPI2 0xEC500000 - -#define S5PC100_PA_USB_HSOTG 0xED200000 -#define S5PC100_PA_USB_HSPHY 0xED300000 - -#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) - -#define S5PC100_PA_FB 0xEE000000 - -#define S5PC100_PA_FIMC0 0xEE200000 -#define S5PC100_PA_FIMC1 0xEE300000 -#define S5PC100_PA_FIMC2 0xEE400000 - -#define S5PC100_PA_I2S0 0xF2000000 -#define S5PC100_PA_I2S1 0xF2100000 -#define S5PC100_PA_I2S2 0xF2200000 - -#define S5PC100_PA_AC97 0xF2300000 - -#define S5PC100_PA_PCM0 0xF2400000 -#define S5PC100_PA_PCM1 0xF2500000 - -#define S5PC100_PA_SPDIF 0xF2600000 - -#define S5PC100_PA_TSADC 0xF3000000 - -#define S5PC100_PA_KEYPAD 0xF3100000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_FB S5PC100_PA_FB -#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) -#define S3C_PA_IIC S5PC100_PA_IIC0 -#define S3C_PA_IIC1 S5PC100_PA_IIC1 -#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD -#define S3C_PA_ONENAND S5PC100_PA_ONENAND -#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF -#define S3C_PA_RTC S5PC100_PA_RTC -#define S3C_PA_TSADC S5PC100_PA_TSADC -#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG -#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY -#define S3C_PA_WDT S5PC100_PA_WATCHDOG -#define S3C_PA_SPI0 S5PC100_PA_SPI0 -#define S3C_PA_SPI1 S5PC100_PA_SPI1 -#define S3C_PA_SPI2 S5PC100_PA_SPI2 - -#define S5P_PA_CHIPID S5PC100_PA_CHIPID -#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 -#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 -#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 -#define S5P_PA_SDRAM S5PC100_PA_SDRAM -#define S5P_PA_SROMC S5PC100_PA_SROMC -#define S5P_PA_SYSCON S5PC100_PA_SYSCON -#define S5P_PA_TIMER S5PC100_PA_TIMER - -#define SAMSUNG_PA_ADC S5PC100_PA_TSADC -#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON -#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD -#define SAMSUNG_PA_TIMER S5PC100_PA_TIMER - -#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) - -#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M) - -/* UART */ - -#define S3C_PA_UART S5PC100_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h deleted file mode 100644 index bc92da2e0ba2..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h +++ /dev/null @@ -1,80 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PC100 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x04) -#define S5P_EPLL_LOCK S5P_CLKREG(0x08) -#define S5P_HPLL_LOCK S5P_CLKREG(0x0C) - -#define S5P_APLL_CON S5P_CLKREG(0x100) -#define S5P_MPLL_CON S5P_CLKREG(0x104) -#define S5P_EPLL_CON S5P_CLKREG(0x108) -#define S5P_HPLL_CON S5P_CLKREG(0x10C) - -#define S5P_CLK_SRC0 S5P_CLKREG(0x200) -#define S5P_CLK_SRC1 S5P_CLKREG(0x204) -#define S5P_CLK_SRC2 S5P_CLKREG(0x208) -#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) - -#define S5P_CLK_DIV0 S5P_CLKREG(0x300) -#define S5P_CLK_DIV1 S5P_CLKREG(0x304) -#define S5P_CLK_DIV2 S5P_CLKREG(0x308) -#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) -#define S5P_CLK_DIV4 S5P_CLKREG(0x310) - -#define S5P_CLK_OUT S5P_CLKREG(0x400) - -#define S5P_CLKGATE_D00 S5P_CLKREG(0x500) -#define S5P_CLKGATE_D01 S5P_CLKREG(0x504) -#define S5P_CLKGATE_D02 S5P_CLKREG(0x508) - -#define S5P_CLKGATE_D10 S5P_CLKREG(0x520) -#define S5P_CLKGATE_D11 S5P_CLKREG(0x524) -#define S5P_CLKGATE_D12 S5P_CLKREG(0x528) -#define S5P_CLKGATE_D13 S5P_CLKREG(0x52C) -#define S5P_CLKGATE_D14 S5P_CLKREG(0x530) -#define S5P_CLKGATE_D15 S5P_CLKREG(0x534) - -#define S5P_CLKGATE_D20 S5P_CLKREG(0x540) - -#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x560) -#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x564) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_D0_MASK (0x7<<8) -#define S5P_CLKDIV0_D0_SHIFT (8) -#define S5P_CLKDIV0_PCLKD0_MASK (0x7<<12) -#define S5P_CLKDIV0_PCLKD0_SHIFT (12) - -/* CLKDIV1 */ -#define S5P_CLKDIV1_D1_MASK (0x7<<12) -#define S5P_CLKDIV1_D1_SHIFT (12) -#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16) -#define S5P_CLKDIV1_PCLKD1_SHIFT (16) - -#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000) -#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200) - -#define S5PC100_SWRESET_RESETVAL 0xc100 - -#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30 - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h deleted file mode 100644 index 0bf73209ec7b..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - GPIO register definitions - */ - -#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H -#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__ - -#include <mach/map.h> - -#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00) -#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4)) - -#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) -#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4)) - -#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00) -#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4)) - -#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40) -#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4)) - -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) - -#define EINT_MODE S3C_GPIO_SFN(0x2) - -#define EINT_GPIO_0(x) S5PC100_GPH0(x) -#define EINT_GPIO_1(x) S5PC100_GPH1(x) -#define EINT_GPIO_2(x) S5PC100_GPH2(x) -#define EINT_GPIO_3(x) S5PC100_GPH3(x) - -#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */ - diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h deleted file mode 100644 index 761627897f30..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <mach/map.h> - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c deleted file mode 100644 index 668af3ac31f3..000000000000 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ /dev/null @@ -1,264 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c - * - * Copyright 2009 Samsung Electronics Co. - * Author: Byungho Min <bhmin@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/fb.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/pwm_backlight.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/gpio-cfg.h> - -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/fb.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/ata-samsung_cf.h> -#include <plat/adc.h> -#include <plat/keypad.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <linux/platform_data/asoc-s3c.h> -#include <plat/backlight.h> -#include <plat/samsung-time.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2440_UFCON_RXTRIG8 | \ - S3C2440_UFCON_TXTRIG16) - -static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKC100_UCON_DEFAULT, - .ulcon = SMDKC100_ULCON_DEFAULT, - .ufcon = SMDKC100_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKC100_UCON_DEFAULT, - .ulcon = SMDKC100_ULCON_DEFAULT, - .ufcon = SMDKC100_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKC100_UCON_DEFAULT, - .ulcon = SMDKC100_ULCON_DEFAULT, - .ufcon = SMDKC100_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKC100_UCON_DEFAULT, - .ulcon = SMDKC100_ULCON_DEFAULT, - .ufcon = SMDKC100_UFCON_DEFAULT, - }, -}; - -/* I2C0 */ -static struct i2c_board_info i2c_devs0[] __initdata = { - {I2C_BOARD_INFO("wm8580", 0x1b),}, -}; - -/* I2C1 */ -static struct i2c_board_info i2c_devs1[] __initdata = { -}; - -/* LCD power controller */ -static void smdkc100_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { - /* module reset */ - gpio_direction_output(S5PC100_GPH0(6), 1); - mdelay(100); - gpio_direction_output(S5PC100_GPH0(6), 0); - mdelay(10); - gpio_direction_output(S5PC100_GPH0(6), 1); - mdelay(10); - } -} - -static struct plat_lcd_data smdkc100_lcd_power_data = { - .set_power = smdkc100_lcd_power_set, -}; - -static struct platform_device smdkc100_lcd_powerdev = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &smdkc100_lcd_power_data, -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win smdkc100_fb_win0 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdkc100_lcd_timing = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - .refresh = 80, -}; - -static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = { - .win[0] = &smdkc100_fb_win0, - .vtiming = &smdkc100_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5pc100_fb_gpio_setup_24bpp, -}; - -static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = { - .setup_gpio = s5pc100_ide_setup_gpio, -}; - -static uint32_t smdkc100_keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), - KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), - KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), - KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) -}; - -static struct matrix_keymap_data smdkc100_keymap_data __initdata = { - .keymap = smdkc100_keymap, - .keymap_size = ARRAY_SIZE(smdkc100_keymap), -}; - -static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = { - .keymap_data = &smdkc100_keymap_data, - .rows = 2, - .cols = 8, -}; - -static struct platform_device *smdkc100_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_cfcon, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_fb, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &samsung_device_pwm, - &s3c_device_ts, - &s3c_device_wdt, - &smdkc100_lcd_powerdev, - &s5pc100_device_iis0, - &samsung_device_keypad, - &s5pc100_device_ac97, - &s3c_device_rtc, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5pc100_device_spdif, -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = { - .no = S5PC100_GPD(0), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdkc100_bl_data = { - .pwm_id = 0, - .enable_gpio = -1, -}; - -static void __init smdkc100_map_io(void) -{ - s5pc100_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init smdkc100_machine_init(void) -{ - s3c24xx_ts_set_platdata(NULL); - - /* I2C */ - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - s3c_fb_set_platdata(&smdkc100_lcd_pdata); - s3c_ide_set_platdata(&smdkc100_ide_pdata); - - samsung_keypad_set_platdata(&smdkc100_keypad_data); - - s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD); - - /* LCD init */ - gpio_request(S5PC100_GPH0(6), "GPH0"); - smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0); - - platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); - - samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data); -} - -MACHINE_START(SMDKC100, "SMDKC100") - /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pc100_init_irq, - .map_io = smdkc100_map_io, - .init_machine = smdkc100_machine_init, - .init_time = samsung_timer_init, - .restart = s5pc100_restart, -MACHINE_END diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c deleted file mode 100644 index 8978e4cf9ed5..000000000000 --- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c - * - * Copyright 2009 Samsung Electronics - * - * Base S5PC100 setup information for 24bpp LCD framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fb.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <plat/fb.h> -#include <plat/gpio-cfg.h> - -#define DISR_OFFSET 0x7008 - -static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr) -{ - s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2)); -} - -void s5pc100_fb_gpio_setup_24bpp(void) -{ - s5pc100_fb_setgpios(S5PC100_GPF0(0), 8); - s5pc100_fb_setgpios(S5PC100_GPF1(0), 8); - s5pc100_fb_setgpios(S5PC100_GPF2(0), 8); - s5pc100_fb_setgpios(S5PC100_GPF3(0), 4); -} diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c deleted file mode 100644 index 89a6a769d622..000000000000 --- a/arch/arm/mach-s5pc100/setup-i2c0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/setup-i2c0.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Base S5PC100 I2C bus 0 gpio configuration - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PC100_GPD(3), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c deleted file mode 100644 index faa667ef02cb..000000000000 --- a/arch/arm/mach-s5pc100/setup-i2c1.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/setup-i2c1.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Base S5PC100 I2C bus 1 gpio configuration - * - * Based on plat-s3c64xx/setup-i2c1.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> - -struct platform_device; /* don't need the contents */ - -#include <linux/gpio.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PC100_GPD(5), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c deleted file mode 100644 index 223aae044466..000000000000 --- a/arch/arm/mach-s5pc100/setup-ide.c +++ /dev/null @@ -1,57 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/setup-ide.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PC100 setup information for IDE - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <mach/regs-clock.h> -#include <plat/gpio-cfg.h> - -static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr) -{ - s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4)); - - for (; nr > 0; nr--, base++) - s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); -} - -void s5pc100_ide_setup_gpio(void) -{ - u32 reg; - - /* Independent CF interface, CF chip select configuration */ - reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f); - writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG); - - /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */ - s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8); - - /*CF_Data[0 - 7] */ - s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8); - - /* CF_Data[8 - 15] */ - s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8); - - /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ - s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4); - - /* EBI_OE, EBI_WE */ - s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0)); - - /* CF_OE, CF_WE */ - s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2)); - - /* CF_CD */ - s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE); -} diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c deleted file mode 100644 index ada377f0c206..000000000000 --- a/arch/arm/mach-s5pc100/setup-keypad.c +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/setup-keypad.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * GPIO configuration for S5PC100 KeyPad device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) -{ - /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3)); - - /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ - s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c deleted file mode 100644 index 6010c0310cb5..000000000000 --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c - * - * Copyright 2009 Samsung Eletronics - * - * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> - -#include <plat/gpio-cfg.h> -#include <plat/sdhci.h> - -void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int num; - - num = width; - /* In case of 8 width, we should decrease the 2 */ - if (width == 8) - num = width - 2; - - /* Set all the necessary GPG0/GPG1 pins to special-function 0 */ - s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2)); - - if (width == 8) - s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2)); - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2)); - } -} - -void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG2 pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2)); - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2)); - } -} - -void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG3 pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2)); - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2)); - } -} diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c deleted file mode 100644 index 183567961de1..000000000000 --- a/arch/arm/mach-s5pc100/setup-spi.c +++ /dev/null @@ -1,41 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/setup-spi.c - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -#ifdef CONFIG_S3C64XX_DEV_SPI0 -int s3c64xx_spi0_cfg_gpio(void) -{ - s3c_gpio_cfgall_range(S5PC100_GPB(0), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -int s3c64xx_spi1_cfg_gpio(void) -{ - s3c_gpio_cfgall_range(S5PC100_GPB(4), 3, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI2 -int s3c64xx_spi2_cfg_gpio(void) -{ - s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); - s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5PC100_GPB(2), 2, - S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); - return 0; -} -#endif diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index f60f2862856d..330bfc8fcd52 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -7,193 +7,28 @@ # Configuration options for the S5PV210/S5PC110 +config ARCH_S5PV210 + bool "Samsung S5PV210/S5PC110" if ARCH_MULTI_V7 + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select ARM_VIC + select CLKSRC_SAMSUNG_PWM + select COMMON_CLK_SAMSUNG + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select PINCTRL + select PINCTRL_EXYNOS + help + Samsung S5PV210/S5PC110 series based systems + if ARCH_S5PV210 config CPU_S5PV210 - bool + def_bool y select ARM_AMBA select PL330_DMA if DMADEVICES - select S5P_EXT_INT - select S5P_PM if PM - select S5P_SLEEP if PM help Enable S5PV210 CPU support -config S5PV210_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S5PV210_SETUP_I2C2 - bool - help - Common setup code for i2c bus 2. - -config S5PV210_SETUP_IDE - bool - help - Common setup code for S5PV210 IDE GPIO configurations - -config S5PV210_SETUP_FB_24BPP - bool - help - Common setup code for S5PV210 with an 24bpp RGB display helper. - -config S5PV210_SETUP_KEYPAD - bool - help - Common setup code for keypad. - -config S5PV210_SETUP_SDHCI - bool - select S5PV210_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PV210 based SDHCI systems - -config S5PV210_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config S5PV210_SETUP_FIMC - bool - help - Common setup code for the camera interfaces. - -config S5PV210_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations. - -config S5PV210_SETUP_USB_PHY - bool - help - Common setup code for USB PHY controller - -menu "S5PC110 Machines" - -config MACH_AQUILA - bool "Aquila" - select CPU_S5PV210 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S5PV210_SETUP_FB_24BPP - select S5PV210_SETUP_SDHCI - select S5PV210_SETUP_USB_PHY - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_ONENAND - help - Machine support for the Samsung Aquila target based on S5PC110 SoC - -config MACH_GONI - bool "GONI" - select CPU_S5PV210 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_I2C2 - select S3C_DEV_USB_HSOTG - select S5PV210_SETUP_FB_24BPP - select S5PV210_SETUP_FIMC - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_KEYPAD - select S5PV210_SETUP_SDHCI - select S5PV210_SETUP_USB_PHY - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_MFC - select S5P_DEV_ONENAND - select S5P_DEV_TV - select S5P_GPIO_INT - select SAMSUNG_DEV_KEYPAD - help - Machine support for Samsung GONI board - S5PC110(MCP) is one of package option of S5PV210 - -config MACH_SMDKC110 - bool "SMDKC110" - select CPU_S5PV210 - select S3C_DEV_I2C1 - select S3C_DEV_I2C2 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_IDE - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_MFC - select SAMSUNG_DEV_IDE - help - Machine support for Samsung SMDKC110 - S5PC110(MCP) is one of package option of S5PV210 - -endmenu - -menu "S5PV210 Machines" - -config MACH_SMDKV210 - bool "SMDKV210" - select CPU_S5PV210 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C2 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5PV210_SETUP_FB_24BPP - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_IDE - select S5PV210_SETUP_KEYPAD - select S5PV210_SETUP_SDHCI - select S5PV210_SETUP_USB_PHY - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_JPEG - select S5P_DEV_MFC - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for Samsung SMDKV210 - -config MACH_TORBRECK - bool "Torbreck" - select ARCH_SPARSEMEM_ENABLE - select CPU_S5PV210 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C2 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_SDHCI - select SAMSUNG_DEV_IDE - help - Machine support for aESOP Torbreck - -endmenu - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 1c4e41998a10..7dc2d0e25a83 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -5,6 +5,8 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include + obj-y := obj-m := obj-n := @@ -12,31 +14,8 @@ obj- := # Core -obj-y += common.o clock.o - -obj-$(CONFIG_PM) += pm.o - -obj-y += dma.o +obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o # machine support -obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o -obj-$(CONFIG_MACH_GONI) += mach-goni.o -obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o -obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o -obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o - -# device support - -obj-y += dev-audio.o - -obj-y += setup-i2c0.o -obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o -obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o -obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o -obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o -obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o +obj-y += s5pv210.o diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot deleted file mode 100644 index 79ece4055b02..000000000000 --- a/arch/arm/mach-s5pv210/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c deleted file mode 100644 index ca463724a3df..000000000000 --- a/arch/arm/mach-s5pv210/clock.c +++ /dev/null @@ -1,1365 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> - -#include "common.h" - -static unsigned long xtal; - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, -}; - -static struct clk *clkset_armclk_list[] = { - [0] = &clk_mout_apll.clk, - [1] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_armclk = { - .sources = clkset_armclk_list, - .nr_sources = ARRAY_SIZE(clkset_armclk_list), -}; - -static struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - }, - .sources = &clkset_armclk, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk clk_hclk_msys = { - .clk = { - .name = "hclk_msys", - .parent = &clk_armclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk clk_pclk_msys = { - .clk = { - .name = "pclk_msys", - .parent = &clk_hclk_msys.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk clk_sclk_a2m = { - .clk = { - .name = "sclk_a2m", - .parent = &clk_mout_apll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, -}; - -static struct clk *clkset_hclk_sys_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_sclk_a2m.clk, -}; - -static struct clksrc_sources clkset_hclk_sys = { - .sources = clkset_hclk_sys_list, - .nr_sources = ARRAY_SIZE(clkset_hclk_sys_list), -}; - -static struct clksrc_clk clk_hclk_dsys = { - .clk = { - .name = "hclk_dsys", - }, - .sources = &clkset_hclk_sys, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_dsys = { - .clk = { - .name = "pclk_dsys", - .parent = &clk_hclk_dsys.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, -}; - -static struct clksrc_clk clk_hclk_psys = { - .clk = { - .name = "hclk_psys", - }, - .sources = &clkset_hclk_sys, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_psys = { - .clk = { - .name = "pclk_psys", - .parent = &clk_hclk_psys.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, -}; - -static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); -} - -static int s5pv210_clk_ip1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP1, clk, enable); -} - -static int s5pv210_clk_ip2_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP2, clk, enable); -} - -static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); -} - -static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable); -} - -static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); -} - -static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); -} - -static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); -} - -static struct clk clk_sclk_hdmi27m = { - .name = "sclk_hdmi27m", - .rate = 27000000, -}; - -static struct clk clk_sclk_hdmiphy = { - .name = "sclk_hdmiphy", -}; - -static struct clk clk_sclk_usbphy0 = { - .name = "sclk_usbphy0", -}; - -static struct clk clk_sclk_usbphy1 = { - .name = "sclk_usbphy1", -}; - -static struct clk clk_pcmcdclk0 = { - .name = "pcmcdclk", -}; - -static struct clk clk_pcmcdclk1 = { - .name = "pcmcdclk", -}; - -static struct clk clk_pcmcdclk2 = { - .name = "pcmcdclk", -}; - -static struct clk *clkset_vpllsrc_list[] = { - [0] = &clk_fin_vpll, - [1] = &clk_sclk_hdmi27m, -}; - -static struct clksrc_sources clkset_vpllsrc = { - .sources = clkset_vpllsrc_list, - .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list), -}; - -static struct clksrc_clk clk_vpllsrc = { - .clk = { - .name = "vpll_src", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 7), - }, - .sources = &clkset_vpllsrc, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 28, .size = 1 }, -}; - -static struct clk *clkset_sclk_vpll_list[] = { - [0] = &clk_vpllsrc.clk, - [1] = &clk_fout_vpll, -}; - -static struct clksrc_sources clkset_sclk_vpll = { - .sources = clkset_sclk_vpll_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), -}; - -static struct clksrc_clk clk_sclk_vpll = { - .clk = { - .name = "sclk_vpll", - }, - .sources = &clkset_sclk_vpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, -}; - -static struct clk *clkset_moutdmc0src_list[] = { - [0] = &clk_sclk_a2m.clk, - [1] = &clk_mout_mpll.clk, - [2] = NULL, - [3] = NULL, -}; - -static struct clksrc_sources clkset_moutdmc0src = { - .sources = clkset_moutdmc0src_list, - .nr_sources = ARRAY_SIZE(clkset_moutdmc0src_list), -}; - -static struct clksrc_clk clk_mout_dmc0 = { - .clk = { - .name = "mout_dmc0", - }, - .sources = &clkset_moutdmc0src, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, -}; - -static struct clksrc_clk clk_sclk_dmc0 = { - .clk = { - .name = "sclk_dmc0", - .parent = &clk_mout_dmc0.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 }, -}; - -static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / 2; -} - -static struct clk_ops clk_hclk_imem_ops = { - .get_rate = s5pv210_clk_imem_get_rate, -}; - -static unsigned long s5pv210_clk_fout_apll_get_rate(struct clk *clk) -{ - return s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); -} - -static struct clk_ops clk_fout_apll_ops = { - .get_rate = s5pv210_clk_fout_apll_get_rate, -}; - -static struct clk init_clocks_off[] = { - { - .name = "rot", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1<<29), - }, { - .name = "fimc", - .devname = "s5pv210-fimc.0", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 24), - }, { - .name = "fimc", - .devname = "s5pv210-fimc.1", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "fimc", - .devname = "s5pv210-fimc.2", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 26), - }, { - .name = "jpeg", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "mfc", - .devname = "s5p-mfc", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "dac", - .devname = "s5p-sdo", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "mixer", - .devname = "s5p-mixer", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "vp", - .devname = "s5p-mixer", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "hdmi", - .devname = "s5pv210-hdmi", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "hdmiphy", - .devname = "s5pv210-hdmi", - .enable = s5pv210_clk_hdmiphy_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "dacphy", - .devname = "s5p-sdo", - .enable = exynos4_clk_dac_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "otg", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "usb-host", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1<<17), - }, { - .name = "lcd", - .parent = &clk_hclk_dsys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1<<0), - }, { - .name = "cfcon", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1<<25), - }, { - .name = "systimer", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "watchdog", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<22), - }, { - .name = "rtc", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<15), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<7), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.2", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<9), - }, { - .name = "i2c", - .devname = "s3c2440-hdmiphy-i2c", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "spi", - .devname = "s5pv210-spi.0", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<12), - }, { - .name = "spi", - .devname = "s5pv210-spi.1", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<13), - }, { - .name = "spi", - .devname = "s5pv210-spi.2", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<14), - }, { - .name = "timers", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<23), - }, { - .name = "adc", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<24), - }, { - .name = "keypad", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<21), - }, { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_p, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<4), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_p, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_p, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "spdif", - .parent = &clk_p, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 0), - }, -}; - -static struct clk init_clocks[] = { - { - .name = "hclk_imem", - .parent = &clk_hclk_msys.clk, - .ctrlbit = (1 << 5), - .enable = s5pv210_clk_ip0_ctrl, - .ops = &clk_hclk_imem_ops, - }, { - .name = "uart", - .devname = "s5pv210-uart.0", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "uart", - .devname = "s5pv210-uart.1", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "uart", - .devname = "s5pv210-uart.2", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "uart", - .devname = "s5pv210-uart.3", - .parent = &clk_pclk_psys.clk, - .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "sromc", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip1_ctrl, - .ctrlbit = (1 << 26), - }, -}; - -static struct clk clk_hsmmc0 = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<16), -}; - -static struct clk clk_hsmmc1 = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<17), -}; - -static struct clk clk_hsmmc2 = { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<18), -}; - -static struct clk clk_hsmmc3 = { - .name = "hsmmc", - .devname = "s3c-sdhci.3", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip2_ctrl, - .ctrlbit = (1<<19), -}; - -static struct clk clk_pdma0 = { - .name = "pdma0", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 3), -}; - -static struct clk clk_pdma1 = { - .name = "pdma1", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 4), -}; - -static struct clk *clkset_uart_list[] = { - [6] = &clk_mout_mpll.clk, - [7] = &clk_mout_epll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_group1_list[] = { - [0] = &clk_sclk_a2m.clk, - [1] = &clk_mout_mpll.clk, - [2] = &clk_mout_epll.clk, - [3] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_group1 = { - .sources = clkset_group1_list, - .nr_sources = ARRAY_SIZE(clkset_group1_list), -}; - -static struct clk *clkset_sclk_onenand_list[] = { - [0] = &clk_hclk_psys.clk, - [1] = &clk_hclk_dsys.clk, -}; - -static struct clksrc_sources clkset_sclk_onenand = { - .sources = clkset_sclk_onenand_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_onenand_list), -}; - -static struct clk *clkset_sclk_dac_list[] = { - [0] = &clk_sclk_vpll.clk, - [1] = &clk_sclk_hdmiphy, -}; - -static struct clksrc_sources clkset_sclk_dac = { - .sources = clkset_sclk_dac_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list), -}; - -static struct clksrc_clk clk_sclk_dac = { - .clk = { - .name = "sclk_dac", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 2), - }, - .sources = &clkset_sclk_dac, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk clk_sclk_pixel = { - .clk = { - .name = "sclk_pixel", - .parent = &clk_sclk_vpll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4}, -}; - -static struct clk *clkset_sclk_hdmi_list[] = { - [0] = &clk_sclk_pixel.clk, - [1] = &clk_sclk_hdmiphy, -}; - -static struct clksrc_sources clkset_sclk_hdmi = { - .sources = clkset_sclk_hdmi_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list), -}; - -static struct clksrc_clk clk_sclk_hdmi = { - .clk = { - .name = "sclk_hdmi", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_sclk_hdmi, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 }, -}; - -static struct clk *clkset_sclk_mixer_list[] = { - [0] = &clk_sclk_dac.clk, - [1] = &clk_sclk_hdmi.clk, -}; - -static struct clksrc_sources clkset_sclk_mixer = { - .sources = clkset_sclk_mixer_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), -}; - -static struct clksrc_clk clk_sclk_mixer = { - .clk = { - .name = "sclk_mixer", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 1), - }, - .sources = &clkset_sclk_mixer, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk *sclk_tv[] = { - &clk_sclk_dac, - &clk_sclk_pixel, - &clk_sclk_hdmi, - &clk_sclk_mixer, -}; - -static struct clk *clkset_sclk_audio0_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_pcmcdclk0, - [2] = &clk_sclk_hdmi27m, - [3] = &clk_sclk_usbphy0, - [4] = &clk_sclk_usbphy1, - [5] = &clk_sclk_hdmiphy, - [6] = &clk_mout_mpll.clk, - [7] = &clk_mout_epll.clk, - [8] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_sclk_audio0 = { - .sources = clkset_sclk_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list), -}; - -static struct clksrc_clk clk_sclk_audio0 = { - .clk = { - .name = "sclk_audio", - .devname = "soc-audio.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_sclk_audio0, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV6, .shift = 0, .size = 4 }, -}; - -static struct clk *clkset_sclk_audio1_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_pcmcdclk1, - [2] = &clk_sclk_hdmi27m, - [3] = &clk_sclk_usbphy0, - [4] = &clk_sclk_usbphy1, - [5] = &clk_sclk_hdmiphy, - [6] = &clk_mout_mpll.clk, - [7] = &clk_mout_epll.clk, - [8] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_sclk_audio1 = { - .sources = clkset_sclk_audio1_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_audio1_list), -}; - -static struct clksrc_clk clk_sclk_audio1 = { - .clk = { - .name = "sclk_audio", - .devname = "soc-audio.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 25), - }, - .sources = &clkset_sclk_audio1, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV6, .shift = 4, .size = 4 }, -}; - -static struct clk *clkset_sclk_audio2_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_pcmcdclk0, - [2] = &clk_sclk_hdmi27m, - [3] = &clk_sclk_usbphy0, - [4] = &clk_sclk_usbphy1, - [5] = &clk_sclk_hdmiphy, - [6] = &clk_mout_mpll.clk, - [7] = &clk_mout_epll.clk, - [8] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_sclk_audio2 = { - .sources = clkset_sclk_audio2_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_audio2_list), -}; - -static struct clksrc_clk clk_sclk_audio2 = { - .clk = { - .name = "sclk_audio", - .devname = "soc-audio.2", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 26), - }, - .sources = &clkset_sclk_audio2, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV6, .shift = 8, .size = 4 }, -}; - -static struct clk *clkset_sclk_spdif_list[] = { - [0] = &clk_sclk_audio0.clk, - [1] = &clk_sclk_audio1.clk, - [2] = &clk_sclk_audio2.clk, -}; - -static struct clksrc_sources clkset_sclk_spdif = { - .sources = clkset_sclk_spdif_list, - .nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list), -}; - -static struct clksrc_clk clk_sclk_spdif = { - .clk = { - .name = "sclk_spdif", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 27), - .ops = &s5p_sclk_spdif_ops, - }, - .sources = &clkset_sclk_spdif, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 }, -}; - -static struct clk *clkset_group2_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_xusbxti, - [2] = &clk_sclk_hdmi27m, - [3] = &clk_sclk_usbphy0, - [4] = &clk_sclk_usbphy1, - [5] = &clk_sclk_hdmiphy, - [6] = &clk_mout_mpll.clk, - [7] = &clk_mout_epll.clk, - [8] = &clk_sclk_vpll.clk, -}; - -static struct clksrc_sources clkset_group2 = { - .sources = clkset_group2_list, - .nr_sources = ARRAY_SIZE(clkset_group2_list), -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_dmc", - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_onenand", - }, - .sources = &clkset_sclk_onenand, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 28, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "s5pv210-fimc.0", - .enable = s5pv210_clk_mask1_ctrl, - .ctrlbit = (1 << 2), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "s5pv210-fimc.1", - .enable = s5pv210_clk_mask1_ctrl, - .ctrlbit = (1 << 3), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "s5pv210-fimc.2", - .enable = s5pv210_clk_mask1_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 3), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 5), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_mfc", - .devname = "s5p-mfc", - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_g2d", - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_g3d", - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 6), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_pwi", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 29), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV6, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_pwm", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 19), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV5, .shift = 12, .size = 4 }, - }, -}; - -static struct clksrc_clk clk_sclk_uart0 = { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart1 = { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 13), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart2 = { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.2", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 14), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_uart3 = { - .clk = { - .name = "uclk1", - .devname = "s5pv210-uart.3", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 15), - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 9), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 10), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_mmc3 = { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.3", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 11), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "s5pv210-spi.0", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 }, - }; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "s5pv210-spi.1", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 17), - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 }, - .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 }, - }; - - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uart0, - &clk_sclk_uart1, - &clk_sclk_uart2, - &clk_sclk_uart3, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_mmc3, - &clk_sclk_spi0, - &clk_sclk_spi1, -}; - -static struct clk *clk_cdev[] = { - &clk_hsmmc0, - &clk_hsmmc1, - &clk_hsmmc2, - &clk_hsmmc3, - &clk_pdma0, - &clk_pdma1, -}; - -/* Clock initialisation code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_armclk, - &clk_hclk_msys, - &clk_sclk_a2m, - &clk_hclk_dsys, - &clk_hclk_psys, - &clk_pclk_msys, - &clk_pclk_dsys, - &clk_pclk_psys, - &clk_vpllsrc, - &clk_sclk_vpll, - &clk_mout_dmc0, - &clk_sclk_dmc0, - &clk_sclk_audio0, - &clk_sclk_audio1, - &clk_sclk_audio2, - &clk_sclk_spdif, -}; - -static u32 epll_div[][6] = { - { 48000000, 0, 48, 3, 3, 0 }, - { 96000000, 0, 48, 3, 2, 0 }, - { 144000000, 1, 72, 3, 2, 0 }, - { 192000000, 0, 48, 3, 1, 0 }, - { 288000000, 1, 72, 3, 1, 0 }, - { 32750000, 1, 65, 3, 4, 35127 }, - { 32768000, 1, 65, 3, 4, 35127 }, - { 45158400, 0, 45, 3, 3, 10355 }, - { 45000000, 0, 45, 3, 3, 10355 }, - { 45158000, 0, 45, 3, 3, 10355 }, - { 49125000, 0, 49, 3, 3, 9961 }, - { 49152000, 0, 49, 3, 3, 9961 }, - { 67737600, 1, 67, 3, 3, 48366 }, - { 67738000, 1, 67, 3, 3, 48366 }, - { 73800000, 1, 73, 3, 3, 47710 }, - { 73728000, 1, 73, 3, 3, 47710 }, - { 36000000, 1, 32, 3, 4, 0 }, - { 60000000, 1, 60, 3, 3, 0 }, - { 72000000, 1, 72, 3, 3, 0 }, - { 80000000, 1, 80, 3, 3, 0 }, - { 84000000, 0, 42, 3, 2, 0 }, - { 50000000, 0, 50, 3, 3, 0 }, -}; - -static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - /* Return if nothing changed */ - if (clk->rate == rate) - return 0; - - epll_con = __raw_readl(S5P_EPLL_CON); - epll_con_k = __raw_readl(S5P_EPLL_CON1); - - epll_con_k &= ~PLL46XX_KDIV_MASK; - epll_con &= ~(1 << 27 | - PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | - PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | - PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= epll_div[i][5] << 0; - epll_con |= (epll_div[i][1] << 27 | - epll_div[i][2] << PLL46XX_MDIV_SHIFT | - epll_div[i][3] << PLL46XX_PDIV_SHIFT | - epll_div[i][4] << PLL46XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", - __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P_EPLL_CON); - __raw_writel(epll_con_k, S5P_EPLL_CON1); - - printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", - clk->rate, rate); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5pv210_epll_ops = { - .set_rate = s5pv210_epll_set_rate, - .get_rate = s5p_epll_get_rate, -}; - -static u32 vpll_div[][5] = { - { 54000000, 3, 53, 3, 0 }, - { 108000000, 3, 53, 2, 0 }, -}; - -static unsigned long s5pv210_vpll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int vpll_con; - unsigned int i; - - /* Return if nothing changed */ - if (clk->rate == rate) - return 0; - - vpll_con = __raw_readl(S5P_VPLL_CON); - vpll_con &= ~(0x1 << 27 | \ - PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT | \ - PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT | \ - PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT); - - for (i = 0; i < ARRAY_SIZE(vpll_div); i++) { - if (vpll_div[i][0] == rate) { - vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT; - vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT; - vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT; - vpll_con |= vpll_div[i][4] << 27; - break; - } - } - - if (i == ARRAY_SIZE(vpll_div)) { - printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", - __func__); - return -EINVAL; - } - - __raw_writel(vpll_con, S5P_VPLL_CON); - - /* Wait for VPLL lock */ - while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT))) - continue; - - clk->rate = rate; - return 0; -} -static struct clk_ops s5pv210_vpll_ops = { - .get_rate = s5pv210_vpll_get_rate, - .set_rate = s5pv210_vpll_set_rate, -}; - -void __init_or_cpufreq s5pv210_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long vpllsrc; - unsigned long armclk; - unsigned long hclk_msys; - unsigned long hclk_dsys; - unsigned long hclk_psys; - unsigned long pclk_msys; - unsigned long pclk_dsys; - unsigned long pclk_psys; - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long vpll; - unsigned int ptr; - u32 clkdiv0, clkdiv1; - - /* Set functions for clk_fout_epll */ - clk_fout_epll.enable = s5p_epll_enable; - clk_fout_epll.ops = &s5pv210_epll_ops; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - clkdiv0 = __raw_readl(S5P_CLK_DIV0); - clkdiv1 = __raw_readl(S5P_CLK_DIV1); - - printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", - __func__, clkdiv0, clkdiv1); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON), - __raw_readl(S5P_EPLL_CON1), pll_4600); - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502); - - clk_fout_apll.ops = &clk_fout_apll_ops; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_vpll.ops = &s5pv210_vpll_ops; - clk_fout_vpll.rate = vpll; - - printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", - apll, mpll, epll, vpll); - - armclk = clk_get_rate(&clk_armclk.clk); - hclk_msys = clk_get_rate(&clk_hclk_msys.clk); - hclk_dsys = clk_get_rate(&clk_hclk_dsys.clk); - hclk_psys = clk_get_rate(&clk_hclk_psys.clk); - pclk_msys = clk_get_rate(&clk_pclk_msys.clk); - pclk_dsys = clk_get_rate(&clk_pclk_dsys.clk); - pclk_psys = clk_get_rate(&clk_pclk_psys.clk); - - printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld\n" - "HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n", - armclk, hclk_msys, hclk_dsys, hclk_psys, - pclk_msys, pclk_dsys, pclk_psys); - - clk_f.rate = armclk; - clk_h.rate = hclk_psys; - clk_p.rate = pclk_psys; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_sclk_hdmi27m, - &clk_sclk_hdmiphy, - &clk_sclk_usbphy0, - &clk_sclk_usbphy1, - &clk_pcmcdclk0, - &clk_pcmcdclk1, - &clk_pcmcdclk2, -}; - -static struct clk_lookup s5pv210_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), - CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk), - CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk), - CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk), - CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.0", &clk_hsmmc3), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), - CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), -}; - -void __init s5pv210_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) - s3c_register_clksrc(sclk_tv[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++) - s3c_register_clksrc(clksrc_cdev[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup)); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) - s3c_disable_clocks(clk_cdev[ptr], 1); - -} diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c deleted file mode 100644 index 7024dcd0e40a..000000000000 --- a/arch/arm/mach-s5pv210/common.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Codes for S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/device.h> -#include <clocksource/samsung_pwm.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <asm/proc-fns.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/devs.h> -#include <plat/sdhci.h> -#include <plat/adc-core.h> -#include <plat/ata-core.h> -#include <plat/fb-core.h> -#include <plat/fimc-core.h> -#include <plat/iic-core.h> -#include <plat/keypad-core.h> -#include <plat/pwm-core.h> -#include <plat/tv-core.h> -#include <plat/spi-core.h> - -#include "common.h" - -static const char name_s5pv210[] = "S5PV210/S5PC110"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = S5PV210_CPU_ID, - .idmask = S5PV210_CPU_MASK, - .map_io = s5pv210_map_io, - .init_clocks = s5pv210_init_clocks, - .init_uarts = s5pv210_init_uarts, - .init = s5pv210_init, - .name = name_s5pv210, - }, -}; - -/* Initial IO mappings */ - -static struct map_desc s5pv210_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(S5PV210_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S5PV210_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S5PV210_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S5PV210_PA_WATCHDOG), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5PV210_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5PV210_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5PV210_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5PV210_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5PV210_PA_VIC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC3, - .pfn = __phys_to_pfn(S5PV210_PA_VIC3), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_DMC0, - .pfn = __phys_to_pfn(S5PV210_PA_DMC0), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_DMC1, - .pfn = __phys_to_pfn(S5PV210_PA_DMC1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_USB_HSPHY, - .pfn =__phys_to_pfn(S5PV210_PA_HSPHY), - .length = SZ_4K, - .type = MT_DEVICE, - } -}; - -void s5pv210_restart(enum reboot_mode mode, const char *cmd) -{ - __raw_writel(0x1, S5P_SWRESET); -} - -static struct samsung_pwm_variant s5pv210_pwm_variant = { - .bits = 32, - .div_base = 0, - .has_tint_cstat = true, - .tclk_mask = (1 << 5), -}; - -void __init samsung_set_timer_source(unsigned int event, unsigned int source) -{ - s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); -} - -void __init samsung_timer_init(void) -{ - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, - IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, - }; - - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &s5pv210_pwm_variant); -} - -/* - * s5pv210_map_io - * - * register the standard cpu IO areas - */ - -void __init s5pv210_init_io(struct map_desc *mach_desc, int size) -{ - /* initialize the io descriptors we need for initialization */ - iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); - if (mach_desc) - iotable_init(mach_desc, size); - - /* detect cpu id and rev. */ - s5p_init_cpu(S5P_VA_CHIPID); - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); - - samsung_pwm_set_platdata(&s5pv210_pwm_variant); -} - -void __init s5pv210_map_io(void) -{ - /* initialise device information early */ - s5pv210_default_sdhci0(); - s5pv210_default_sdhci1(); - s5pv210_default_sdhci2(); - s5pv210_default_sdhci3(); - - s3c_adc_setname("samsung-adc-v3"); - - s3c_cfcon_setname("s5pv210-pata"); - - s3c_fimc_setname(0, "s5pv210-fimc"); - s3c_fimc_setname(1, "s5pv210-fimc"); - s3c_fimc_setname(2, "s5pv210-fimc"); - - /* the i2c devices are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - s3c_i2c2_setname("s3c2440-i2c"); - - s3c_fb_setname("s5pv210-fb"); - - /* Use s5pv210-keypad instead of samsung-keypad */ - samsung_keypad_setname("s5pv210-keypad"); - - /* setup TV devices */ - s5p_hdmi_setname("s5pv210-hdmi"); - - s3c64xx_spi_setname("s5pv210-spi"); -} - -void __init s5pv210_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5pv210_register_clocks(); - s5pv210_setup_clocks(); -} - -void __init s5pv210_init_irq(void) -{ - u32 vic[4]; /* S5PV210 supports 4 VIC */ - - /* All the VICs are fully populated. */ - vic[0] = ~0; - vic[1] = ~0; - vic[2] = ~0; - vic[3] = ~0; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct bus_type s5pv210_subsys = { - .name = "s5pv210-core", - .dev_name = "s5pv210-core", -}; - -static struct device s5pv210_dev = { - .bus = &s5pv210_subsys, -}; - -static int __init s5pv210_core_init(void) -{ - return subsys_system_register(&s5pv210_subsys, NULL); -} -core_initcall(s5pv210_core_init); - -int __init s5pv210_init(void) -{ - printk(KERN_INFO "S5PV210: Initializing architecture\n"); - return device_register(&s5pv210_dev); -} - -/* uart registration process */ - -void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h index fe1beb54e548..2ad387c1ecf0 100644 --- a/arch/arm/mach-s5pv210/common.h +++ b/arch/arm/mach-s5pv210/common.h @@ -12,19 +12,12 @@ #ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H #define __ARCH_ARM_MACH_S5PV210_COMMON_H -#include <linux/reboot.h> - -void s5pv210_init_io(struct map_desc *mach_desc, int size); -void s5pv210_init_irq(void); - -void s5pv210_register_clocks(void); -void s5pv210_setup_clocks(void); - -void s5pv210_restart(enum reboot_mode mode, const char *cmd); - -extern int s5pv210_init(void); -extern void s5pv210_map_io(void); -extern void s5pv210_init_clocks(int xtal); -extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no); +#ifdef CONFIG_PM_SLEEP +u32 exynos_get_eint_wake_mask(void); +void s5pv210_cpu_resume(void); +void s5pv210_pm_init(void); +#else +static inline void s5pv210_pm_init(void) {} +#endif #endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c deleted file mode 100644 index 2d67361ef431..000000000000 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ /dev/null @@ -1,246 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -#define S5PV210_AUDSS_INT_MEM (0xC0000000) - -static int s5pv210_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2)); - break; - case 1: - s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2)); - break; - case 2: - s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata i2sv5_pdata = { - .cfg_gpio = s5pv210_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI - | QUIRK_NEED_RSTCLR, - .idma_addr = S5PV210_AUDSS_INT_MEM, - }, - }, -}; - -static struct resource s5pv210_iis0_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_IIS0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), - [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), -}; - -struct platform_device s5pv210_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_iis0_resource), - .resource = s5pv210_iis0_resource, - .dev = { - .platform_data = &i2sv5_pdata, - }, -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5pv210_cfg_i2s, -}; - -static struct resource s5pv210_iis1_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_IIS1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), -}; - -struct platform_device s5pv210_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_iis1_resource), - .resource = s5pv210_iis1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -static struct resource s5pv210_iis2_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_IIS2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), -}; - -struct platform_device s5pv210_device_iis2 = { - .name = "samsung-i2s", - .id = 2, - .num_resources = ARRAY_SIZE(s5pv210_iis2_resource), - .resource = s5pv210_iis2_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3)); - break; - case 1: - s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3)); - break; - case 2: - s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2)); - break; - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5pv210_pcm_cfg_gpio, -}; - -static struct resource s5pv210_pcm0_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_PCM0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), -}; - -struct platform_device s5pv210_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_pcm0_resource), - .resource = s5pv210_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5pv210_pcm1_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_PCM1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), -}; - -struct platform_device s5pv210_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_pcm1_resource), - .resource = s5pv210_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5pv210_pcm2_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_PCM2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM2_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM2_RX), -}; - -struct platform_device s5pv210_device_pcm2 = { - .name = "samsung-pcm", - .id = 2, - .num_resources = ARRAY_SIZE(s5pv210_pcm2_resource), - .resource = s5pv210_pcm2_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -/* AC97 Controller platform devices */ - -static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev) -{ - return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4)); -} - -static struct resource s5pv210_ac97_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_AC97, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), - [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), - [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), - [4] = DEFINE_RES_IRQ(IRQ_AC97), -}; - -static struct s3c_audio_pdata s3c_ac97_pdata = { - .cfg_gpio = s5pv210_ac97_cfg_gpio, -}; - -static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pv210_device_ac97 = { - .name = "samsung-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(s5pv210_ac97_resource), - .resource = s5pv210_ac97_resource, - .dev = { - .platform_data = &s3c_ac97_pdata, - .dma_mask = &s5pv210_ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* S/PDIF Controller platform_device */ - -static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev) -{ - s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3)); - - return 0; -} - -static struct resource s5pv210_spdif_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_SPDIF, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPDIF), -}; - -static struct s3c_audio_pdata samsung_spdif_pdata = { - .cfg_gpio = s5pv210_spdif_cfg_gpio, -}; - -static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pv210_device_spdif = { - .name = "samsung-spdif", - .id = -1, - .num_resources = ARRAY_SIZE(s5pv210_spdif_resource), - .resource = s5pv210_spdif_resource, - .dev = { - .platform_data = &samsung_spdif_pdata, - .dma_mask = &s5pv210_spdif_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c deleted file mode 100644 index b8337e248b09..000000000000 --- a/arch/arm/mach-s5pv210/dma.c +++ /dev/null @@ -1,130 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/dma.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl330.h> - -#include <asm/irq.h> -#include <plat/devs.h> -#include <plat/irqs.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/dma.h> - -static u8 pdma0_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_MAX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S0S_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_MAX, - DMACH_MAX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_MAX, - DMACH_MAX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_MAX, - DMACH_PWM, - DMACH_SPDIF, -}; - -static struct dma_pl330_platdata s5pv210_pdma0_pdata = { - .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri_id = pdma0_peri, -}; - -static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, - S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata); - -static u8 pdma1_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_MAX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S0S_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_MAX, - DMACH_MAX, - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MSM_REQ0, - DMACH_MSM_REQ1, - DMACH_MSM_REQ2, - DMACH_MSM_REQ3, - DMACH_PCM2_RX, - DMACH_PCM2_TX, -}; - -static struct dma_pl330_platdata s5pv210_pdma1_pdata = { - .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri_id = pdma1_peri, -}; - -static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, - S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata); - -static int __init s5pv210_dma_init(void) -{ - dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); - amba_device_register(&s5pv210_pdma0_device, &iomem_resource); - - dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); - amba_device_register(&s5pv210_pdma1_device, &iomem_resource); - - return 0; -} -arch_initcall(s5pv210_dma_init); diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h deleted file mode 100644 index 6c8b903c02e4..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ /dev/null @@ -1,140 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -/* Practically, GPIO banks up to MP03 are the configurable gpio banks */ - -/* GPIO bank sizes */ -#define S5PV210_GPIO_A0_NR (8) -#define S5PV210_GPIO_A1_NR (4) -#define S5PV210_GPIO_B_NR (8) -#define S5PV210_GPIO_C0_NR (5) -#define S5PV210_GPIO_C1_NR (5) -#define S5PV210_GPIO_D0_NR (4) -#define S5PV210_GPIO_D1_NR (6) -#define S5PV210_GPIO_E0_NR (8) -#define S5PV210_GPIO_E1_NR (5) -#define S5PV210_GPIO_F0_NR (8) -#define S5PV210_GPIO_F1_NR (8) -#define S5PV210_GPIO_F2_NR (8) -#define S5PV210_GPIO_F3_NR (6) -#define S5PV210_GPIO_G0_NR (7) -#define S5PV210_GPIO_G1_NR (7) -#define S5PV210_GPIO_G2_NR (7) -#define S5PV210_GPIO_G3_NR (7) -#define S5PV210_GPIO_H0_NR (8) -#define S5PV210_GPIO_H1_NR (8) -#define S5PV210_GPIO_H2_NR (8) -#define S5PV210_GPIO_H3_NR (8) -#define S5PV210_GPIO_I_NR (7) -#define S5PV210_GPIO_J0_NR (8) -#define S5PV210_GPIO_J1_NR (6) -#define S5PV210_GPIO_J2_NR (8) -#define S5PV210_GPIO_J3_NR (8) -#define S5PV210_GPIO_J4_NR (5) - -#define S5PV210_GPIO_MP01_NR (8) -#define S5PV210_GPIO_MP02_NR (4) -#define S5PV210_GPIO_MP03_NR (8) -#define S5PV210_GPIO_MP04_NR (8) -#define S5PV210_GPIO_MP05_NR (8) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5PV210_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5PV210_GPIO_A0_START = 0, - S5PV210_GPIO_A1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A0), - S5PV210_GPIO_B_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A1), - S5PV210_GPIO_C0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_B), - S5PV210_GPIO_C1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C0), - S5PV210_GPIO_D0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C1), - S5PV210_GPIO_D1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D0), - S5PV210_GPIO_E0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D1), - S5PV210_GPIO_E1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E0), - S5PV210_GPIO_F0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E1), - S5PV210_GPIO_F1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F0), - S5PV210_GPIO_F2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F1), - S5PV210_GPIO_F3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F2), - S5PV210_GPIO_G0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F3), - S5PV210_GPIO_G1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G0), - S5PV210_GPIO_G2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G1), - S5PV210_GPIO_G3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G2), - S5PV210_GPIO_H0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G3), - S5PV210_GPIO_H1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H0), - S5PV210_GPIO_H2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H1), - S5PV210_GPIO_H3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H2), - S5PV210_GPIO_I_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H3), - S5PV210_GPIO_J0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_I), - S5PV210_GPIO_J1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J0), - S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1), - S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2), - S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3), - S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4), - S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01), - S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02), - S5PV210_GPIO_MP04_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03), - S5PV210_GPIO_MP05_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04), -}; - -/* S5PV210 GPIO number definitions */ -#define S5PV210_GPA0(_nr) (S5PV210_GPIO_A0_START + (_nr)) -#define S5PV210_GPA1(_nr) (S5PV210_GPIO_A1_START + (_nr)) -#define S5PV210_GPB(_nr) (S5PV210_GPIO_B_START + (_nr)) -#define S5PV210_GPC0(_nr) (S5PV210_GPIO_C0_START + (_nr)) -#define S5PV210_GPC1(_nr) (S5PV210_GPIO_C1_START + (_nr)) -#define S5PV210_GPD0(_nr) (S5PV210_GPIO_D0_START + (_nr)) -#define S5PV210_GPD1(_nr) (S5PV210_GPIO_D1_START + (_nr)) -#define S5PV210_GPE0(_nr) (S5PV210_GPIO_E0_START + (_nr)) -#define S5PV210_GPE1(_nr) (S5PV210_GPIO_E1_START + (_nr)) -#define S5PV210_GPF0(_nr) (S5PV210_GPIO_F0_START + (_nr)) -#define S5PV210_GPF1(_nr) (S5PV210_GPIO_F1_START + (_nr)) -#define S5PV210_GPF2(_nr) (S5PV210_GPIO_F2_START + (_nr)) -#define S5PV210_GPF3(_nr) (S5PV210_GPIO_F3_START + (_nr)) -#define S5PV210_GPG0(_nr) (S5PV210_GPIO_G0_START + (_nr)) -#define S5PV210_GPG1(_nr) (S5PV210_GPIO_G1_START + (_nr)) -#define S5PV210_GPG2(_nr) (S5PV210_GPIO_G2_START + (_nr)) -#define S5PV210_GPG3(_nr) (S5PV210_GPIO_G3_START + (_nr)) -#define S5PV210_GPH0(_nr) (S5PV210_GPIO_H0_START + (_nr)) -#define S5PV210_GPH1(_nr) (S5PV210_GPIO_H1_START + (_nr)) -#define S5PV210_GPH2(_nr) (S5PV210_GPIO_H2_START + (_nr)) -#define S5PV210_GPH3(_nr) (S5PV210_GPIO_H3_START + (_nr)) -#define S5PV210_GPI(_nr) (S5PV210_GPIO_I_START + (_nr)) -#define S5PV210_GPJ0(_nr) (S5PV210_GPIO_J0_START + (_nr)) -#define S5PV210_GPJ1(_nr) (S5PV210_GPIO_J1_START + (_nr)) -#define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr)) -#define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr)) -#define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr)) -#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr)) -#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr)) -#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr)) -#define S5PV210_MP04(_nr) (S5PV210_GPIO_MP04_START + (_nr)) -#define S5PV210_MP05(_nr) (S5PV210_GPIO_MP05_START + (_nr)) - -/* the end of the S5PV210 specific gpios */ -#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1) -#define S3C_GPIO_END S5PV210_GPIO_END - -/* define the number of gpios we need to the one after the MP05() range */ -#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h deleted file mode 100644 index fada7a392d09..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h deleted file mode 100644 index 5e0de3a31f3d..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ /dev/null @@ -1,137 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* VIC0: System, DMA, Timer */ - -#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) -#define IRQ_BATF S5P_IRQ_VIC0(17) -#define IRQ_MDMA S5P_IRQ_VIC0(18) -#define IRQ_PDMA0 S5P_IRQ_VIC0(19) -#define IRQ_PDMA1 S5P_IRQ_VIC0(20) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) -#define IRQ_WDT S5P_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) -#define IRQ_GPIOINT S5P_IRQ_VIC0(30) -#define IRQ_FIMC3 S5P_IRQ_VIC0(31) - -/* VIC1: ARM, Power, Memory, Connectivity, Storage */ - -#define IRQ_PMU S5P_IRQ_VIC1(0) -#define IRQ_CORTEX1 S5P_IRQ_VIC1(1) -#define IRQ_CORTEX2 S5P_IRQ_VIC1(2) -#define IRQ_CORTEX3 S5P_IRQ_VIC1(3) -#define IRQ_CORTEX4 S5P_IRQ_VIC1(4) -#define IRQ_IEMAPC S5P_IRQ_VIC1(5) -#define IRQ_IEMIEC S5P_IRQ_VIC1(6) -#define IRQ_ONENAND S5P_IRQ_VIC1(7) -#define IRQ_NFC S5P_IRQ_VIC1(8) -#define IRQ_CFCON S5P_IRQ_VIC1(9) -#define IRQ_UART0 S5P_IRQ_VIC1(10) -#define IRQ_UART1 S5P_IRQ_VIC1(11) -#define IRQ_UART2 S5P_IRQ_VIC1(12) -#define IRQ_UART3 S5P_IRQ_VIC1(13) -#define IRQ_IIC S5P_IRQ_VIC1(14) -#define IRQ_SPI0 S5P_IRQ_VIC1(15) -#define IRQ_SPI1 S5P_IRQ_VIC1(16) -#define IRQ_SPI2 S5P_IRQ_VIC1(17) -#define IRQ_IRDA S5P_IRQ_VIC1(18) -#define IRQ_IIC2 S5P_IRQ_VIC1(19) -#define IRQ_IIC_HDMIPHY S5P_IRQ_VIC1(20) -#define IRQ_HSIRX S5P_IRQ_VIC1(21) -#define IRQ_HSITX S5P_IRQ_VIC1(22) -#define IRQ_UHOST S5P_IRQ_VIC1(23) -#define IRQ_OTG S5P_IRQ_VIC1(24) -#define IRQ_MSM S5P_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_MIPI_CSIS S5P_IRQ_VIC1(29) -#define IRQ_MIPIDSI S5P_IRQ_VIC1(30) -#define IRQ_ONENAND_AUDI S5P_IRQ_VIC1(31) - -/* VIC2: Multimedia, Audio, Security */ - -#define IRQ_LCD0 S5P_IRQ_VIC2(0) -#define IRQ_LCD1 S5P_IRQ_VIC2(1) -#define IRQ_LCD2 S5P_IRQ_VIC2(2) -#define IRQ_LCD3 S5P_IRQ_VIC2(3) -#define IRQ_ROTATOR S5P_IRQ_VIC2(4) -#define IRQ_FIMC0 S5P_IRQ_VIC2(5) -#define IRQ_FIMC1 S5P_IRQ_VIC2(6) -#define IRQ_FIMC2 S5P_IRQ_VIC2(7) -#define IRQ_JPEG S5P_IRQ_VIC2(8) -#define IRQ_2D S5P_IRQ_VIC2(9) -#define IRQ_3D S5P_IRQ_VIC2(10) -#define IRQ_MIXER S5P_IRQ_VIC2(11) -#define IRQ_HDMI S5P_IRQ_VIC2(12) -#define IRQ_IIC1 S5P_IRQ_VIC2(13) -#define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_SDO S5P_IRQ_VIC2(15) -#define IRQ_I2S0 S5P_IRQ_VIC2(16) -#define IRQ_I2S1 S5P_IRQ_VIC2(17) -#define IRQ_I2S2 S5P_IRQ_VIC2(18) -#define IRQ_AC97 S5P_IRQ_VIC2(19) -#define IRQ_PCM0 S5P_IRQ_VIC2(20) -#define IRQ_PCM1 S5P_IRQ_VIC2(21) -#define IRQ_SPDIF S5P_IRQ_VIC2(22) -#define IRQ_ADC S5P_IRQ_VIC2(23) -#define IRQ_PENDN S5P_IRQ_VIC2(24) -#define IRQ_TC IRQ_PENDN -#define IRQ_KEYPAD S5P_IRQ_VIC2(25) -#define IRQ_CG S5P_IRQ_VIC2(26) -#define IRQ_SSS_INT S5P_IRQ_VIC2(27) -#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) -#define IRQ_PCM2 S5P_IRQ_VIC2(29) -#define IRQ_SDMIRQ S5P_IRQ_VIC2(30) -#define IRQ_SDMFIQ S5P_IRQ_VIC2(31) - -/* VIC3: Etc */ - -#define IRQ_IPC S5P_IRQ_VIC3(0) -#define IRQ_HOSTIF S5P_IRQ_VIC3(1) -#define IRQ_HSMMC3 S5P_IRQ_VIC3(2) -#define IRQ_CEC S5P_IRQ_VIC3(3) -#define IRQ_TSI S5P_IRQ_VIC3(4) -#define IRQ_MDNIE0 S5P_IRQ_VIC3(5) -#define IRQ_MDNIE1 S5P_IRQ_VIC3(6) -#define IRQ_MDNIE2 S5P_IRQ_VIC3(7) -#define IRQ_MDNIE3 S5P_IRQ_VIC3(8) -#define IRQ_VIC_END S5P_IRQ_VIC3(31) - -#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) -#define S5P_EINT_BASE2 (IRQ_VIC_END + 1) - -/* GPIO interrupt */ -#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) -#define S5P_GPIOINT_GROUP_MAXNR 22 - -/* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) - -/* Compatibility */ -#define IRQ_LCD_FIFO IRQ_LCD0 -#define IRQ_LCD_VSYNC IRQ_LCD1 -#define IRQ_LCD_SYSTEM IRQ_LCD2 -#define IRQ_MIPI_CSIS0 IRQ_MIPI_CSIS - -#endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h deleted file mode 100644 index 763929aca52d..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ /dev/null @@ -1,158 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5PV210_PA_SDRAM 0x20000000 - -#define S5PV210_PA_SROM_BANK5 0xA8000000 - -#define S5PC110_PA_ONENAND 0xB0000000 -#define S5PC110_PA_ONENAND_DMA 0xB0600000 - -#define S5PV210_PA_CHIPID 0xE0000000 - -#define S5PV210_PA_SYSCON 0xE0100000 - -#define S5PV210_PA_GPIO 0xE0200000 - -#define S5PV210_PA_SPDIF 0xE1100000 - -#define S5PV210_PA_SPI0 0xE1300000 -#define S5PV210_PA_SPI1 0xE1400000 - -#define S5PV210_PA_KEYPAD 0xE1600000 - -#define S5PV210_PA_ADC 0xE1700000 - -#define S5PV210_PA_IIC0 0xE1800000 -#define S5PV210_PA_IIC1 0xFAB00000 -#define S5PV210_PA_IIC2 0xE1A00000 - -#define S5PV210_PA_AC97 0xE2200000 - -#define S5PV210_PA_PCM0 0xE2300000 -#define S5PV210_PA_PCM1 0xE1200000 -#define S5PV210_PA_PCM2 0xE2B00000 - -#define S5PV210_PA_TIMER 0xE2500000 -#define S5PV210_PA_SYSTIMER 0xE2600000 -#define S5PV210_PA_WATCHDOG 0xE2700000 -#define S5PV210_PA_RTC 0xE2800000 - -#define S5PV210_PA_UART 0xE2900000 - -#define S5PV210_PA_SROMC 0xE8000000 - -#define S5PV210_PA_CFCON 0xE8200000 - -#define S5PV210_PA_MFC 0xF1700000 - -#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) - -#define S5PV210_PA_HSOTG 0xEC000000 -#define S5PV210_PA_HSPHY 0xEC100000 - -#define S5PV210_PA_IIS0 0xEEE30000 -#define S5PV210_PA_IIS1 0xE2100000 -#define S5PV210_PA_IIS2 0xE2A00000 - -#define S5PV210_PA_DMC0 0xF0000000 -#define S5PV210_PA_DMC1 0xF1400000 - -#define S5PV210_PA_VIC0 0xF2000000 -#define S5PV210_PA_VIC1 0xF2100000 -#define S5PV210_PA_VIC2 0xF2200000 -#define S5PV210_PA_VIC3 0xF2300000 - -#define S5PV210_PA_FB 0xF8000000 - -#define S5PV210_PA_MDMA 0xFA200000 -#define S5PV210_PA_PDMA0 0xE0900000 -#define S5PV210_PA_PDMA1 0xE0A00000 - -#define S5PV210_PA_MIPI_CSIS 0xFA600000 - -#define S5PV210_PA_FIMC0 0xFB200000 -#define S5PV210_PA_FIMC1 0xFB300000 -#define S5PV210_PA_FIMC2 0xFB400000 - -#define S5PV210_PA_JPEG 0xFB600000 - -#define S5PV210_PA_SDO 0xF9000000 -#define S5PV210_PA_VP 0xF9100000 -#define S5PV210_PA_MIXER 0xF9200000 -#define S5PV210_PA_HDMI 0xFA100000 -#define S5PV210_PA_IIC_HDMIPHY 0xFA900000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_FB S5PV210_PA_FB -#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) -#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) -#define S3C_PA_IIC S5PV210_PA_IIC0 -#define S3C_PA_IIC1 S5PV210_PA_IIC1 -#define S3C_PA_IIC2 S5PV210_PA_IIC2 -#define S3C_PA_RTC S5PV210_PA_RTC -#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG -#define S3C_PA_WDT S5PV210_PA_WATCHDOG -#define S3C_PA_SPI0 S5PV210_PA_SPI0 -#define S3C_PA_SPI1 S5PV210_PA_SPI1 - -#define S5P_PA_CHIPID S5PV210_PA_CHIPID -#define S5P_PA_FIMC0 S5PV210_PA_FIMC0 -#define S5P_PA_FIMC1 S5PV210_PA_FIMC1 -#define S5P_PA_FIMC2 S5PV210_PA_FIMC2 -#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS -#define S5P_PA_MFC S5PV210_PA_MFC -#define S5P_PA_IIC_HDMIPHY S5PV210_PA_IIC_HDMIPHY - -#define S5P_PA_SDO S5PV210_PA_SDO -#define S5P_PA_VP S5PV210_PA_VP -#define S5P_PA_MIXER S5PV210_PA_MIXER -#define S5P_PA_HDMI S5PV210_PA_HDMI - -#define S5P_PA_ONENAND S5PC110_PA_ONENAND -#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA -#define S5P_PA_SDRAM S5PV210_PA_SDRAM -#define S5P_PA_SROMC S5PV210_PA_SROMC -#define S5P_PA_SYSCON S5PV210_PA_SYSCON -#define S5P_PA_TIMER S5PV210_PA_TIMER - -#define S5P_PA_JPEG S5PV210_PA_JPEG - -#define SAMSUNG_PA_ADC S5PV210_PA_ADC -#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON -#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD -#define SAMSUNG_PA_TIMER S5PV210_PA_TIMER - -/* UART */ - -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) - -#define S3C_PA_UART S5PV210_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h deleted file mode 100644 index 2d3cfa221d5f..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/memory.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/memory.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) - -/* - * Sparsemem support - * Physical memory can be located from 0x20000000 to 0x7fffffff, - * so MAX_PHYSMEM_BITS is 31. - */ - -#define MAX_PHYSMEM_BITS 31 -#define SECTION_SIZE_BITS 28 - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h deleted file mode 100644 index eba8aea63ed8..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h, - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -static inline void s3c_pm_debug_init_uart(void) -{ - /* nothing here yet */ -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); - __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); -} - -static inline void s3c_pm_arch_stop_clocks(void) -{ - /* nothing here yet */ -} - -static inline void s3c_pm_arch_show_resume_irqs(void) -{ - /* nothing here yet */ -} - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ - /* nothing here yet */ -} - -static inline void s3c_pm_restored_gpios(void) { } -static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index e345584d4c34..b14ffcd7f6cc 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_REGS_CLOCK_H #define __ASM_ARCH_REGS_CLOCK_H __FILE__ -#include <mach/map.h> +#include <plat/map-base.h> #define S5P_CLKREG(x) (S3C_VA_SYS + (x)) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h deleted file mode 100644 index de0c89976078..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +++ /dev/null @@ -1,41 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV210 - GPIO (including EINT) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include <mach/map.h> - -#define S5PV210_EINT30CON (S5P_VA_GPIO + 0xE00) -#define S5P_EINT_CON(x) (S5PV210_EINT30CON + ((x) * 0x4)) - -#define S5PV210_EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) -#define S5P_EINT_FLTCON(x) (S5PV210_EINT30FLTCON0 + ((x) * 0x4)) - -#define S5PV210_EINT30MASK (S5P_VA_GPIO + 0xF00) -#define S5P_EINT_MASK(x) (S5PV210_EINT30MASK + ((x) * 0x4)) - -#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40) -#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4)) - -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define EINT_GPIO_0(x) S5PV210_GPH0(x) -#define EINT_GPIO_1(x) S5PV210_GPH1(x) -#define EINT_GPIO_2(x) S5PV210_GPH2(x) -#define EINT_GPIO_3(x) S5PV210_GPH3(x) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h deleted file mode 100644 index d8bc1e6c7aaa..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/regs-irq.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <mach/map.h> - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c deleted file mode 100644 index cc37edacda26..000000000000 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ /dev/null @@ -1,687 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-aquila.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/fb.h> -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/mfd/max8998.h> -#include <linux/mfd/wm8994/pdata.h> -#include <linux/regulator/fixed.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/gpio.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <video/samsung_fimd.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/gpio-cfg.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/fb.h> -#include <plat/fimc-core.h> -#include <plat/sdhci.h> -#include <plat/samsung-time.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = AQUILA_UCON_DEFAULT, - .ulcon = AQUILA_ULCON_DEFAULT, - /* - * Actually UART0 can support 256 bytes fifo, but aquila board - * supports 128 bytes fifo because of initial chip bug - */ - .ufcon = AQUILA_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = AQUILA_UCON_DEFAULT, - .ulcon = AQUILA_ULCON_DEFAULT, - .ufcon = AQUILA_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = AQUILA_UCON_DEFAULT, - .ulcon = AQUILA_ULCON_DEFAULT, - .ufcon = AQUILA_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = AQUILA_UCON_DEFAULT, - .ulcon = AQUILA_ULCON_DEFAULT, - .ufcon = AQUILA_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, - }, -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win aquila_fb_win0 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 480, - .yres = 800, -}; - -static struct s3c_fb_pd_win aquila_fb_win1 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 480, - .yres = 800, -}; - -static struct fb_videomode aquila_lcd_timing = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 3, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 2, - .xres = 480, - .yres = 800, -}; - -static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { - .win[0] = &aquila_fb_win0, - .win[1] = &aquila_fb_win1, - .vtiming = &aquila_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | - VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, - .setup_gpio = s5pv210_fb_gpio_setup_24bpp, -}; - -/* MAX8998 regulators */ -#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) - -static struct regulator_init_data aquila_ldo2_data = { - .constraints = { - .name = "VALIVE_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data aquila_ldo3_data = { - .constraints = { - .name = "VUSB+MIPI_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo4_data = { - .constraints = { - .name = "VDAC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data aquila_ldo5_data = { - .constraints = { - .name = "VTF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data aquila_ldo6_data = { - .constraints = { - .name = "VCC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data aquila_ldo7_data = { - .constraints = { - .name = "VCC_3.0V", - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = 1, - .boot_on = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo8_data = { - .constraints = { - .name = "VUSB+VADC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo9_data = { - .constraints = { - .name = "VCC+VCAM_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo10_data = { - .constraints = { - .name = "VPLL_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .boot_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo11_data = { - .constraints = { - .name = "CAM_IO_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo12_data = { - .constraints = { - .name = "CAM_ISP_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo13_data = { - .constraints = { - .name = "CAM_A_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo14_data = { - .constraints = { - .name = "CAM_CIF_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo15_data = { - .constraints = { - .name = "CAM_AF_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo16_data = { - .constraints = { - .name = "VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo17_data = { - .constraints = { - .name = "CAM_8M_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -/* BUCK */ -static struct regulator_consumer_supply buck1_consumer = - REGULATOR_SUPPLY("vddarm", NULL); - -static struct regulator_consumer_supply buck2_consumer = - REGULATOR_SUPPLY("vddint", NULL); - -static struct regulator_init_data aquila_buck1_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck1_consumer, -}; - -static struct regulator_init_data aquila_buck2_data = { - .constraints = { - .name = "VINT_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck2_consumer, -}; - -static struct regulator_init_data aquila_buck3_data = { - .constraints = { - .name = "VCC_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data aquila_buck4_data = { - .constraints = { - .name = "CAM_CORE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct max8998_regulator_data aquila_regulators[] = { - { MAX8998_LDO2, &aquila_ldo2_data }, - { MAX8998_LDO3, &aquila_ldo3_data }, - { MAX8998_LDO4, &aquila_ldo4_data }, - { MAX8998_LDO5, &aquila_ldo5_data }, - { MAX8998_LDO6, &aquila_ldo6_data }, - { MAX8998_LDO7, &aquila_ldo7_data }, - { MAX8998_LDO8, &aquila_ldo8_data }, - { MAX8998_LDO9, &aquila_ldo9_data }, - { MAX8998_LDO10, &aquila_ldo10_data }, - { MAX8998_LDO11, &aquila_ldo11_data }, - { MAX8998_LDO12, &aquila_ldo12_data }, - { MAX8998_LDO13, &aquila_ldo13_data }, - { MAX8998_LDO14, &aquila_ldo14_data }, - { MAX8998_LDO15, &aquila_ldo15_data }, - { MAX8998_LDO16, &aquila_ldo16_data }, - { MAX8998_LDO17, &aquila_ldo17_data }, - { MAX8998_BUCK1, &aquila_buck1_data }, - { MAX8998_BUCK2, &aquila_buck2_data }, - { MAX8998_BUCK3, &aquila_buck3_data }, - { MAX8998_BUCK4, &aquila_buck4_data }, -}; - -static struct max8998_platform_data aquila_max8998_pdata = { - .num_regulators = ARRAY_SIZE(aquila_regulators), - .regulators = aquila_regulators, - .buck1_set1 = S5PV210_GPH0(3), - .buck1_set2 = S5PV210_GPH0(4), - .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, - .buck2_voltage = { 1200000, 1200000 }, -}; -#endif - -static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - REGULATOR_SUPPLY("DBVDD", "5-001a"), - REGULATOR_SUPPLY("AVDD2", "5-001a"), - REGULATOR_SUPPLY("CPVDD", "5-001a"), -}; - -static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - REGULATOR_SUPPLY("SPKVDD1", "5-001a"), - REGULATOR_SUPPLY("SPKVDD2", "5-001a"), -}; - -static struct regulator_init_data wm8994_fixed_voltage0_init_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), - .consumer_supplies = wm8994_fixed_voltage0_supplies, -}; - -static struct regulator_init_data wm8994_fixed_voltage1_init_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), - .consumer_supplies = wm8994_fixed_voltage1_supplies, -}; - -static struct fixed_voltage_config wm8994_fixed_voltage0_config = { - .supply_name = "VCC_1.8V_PDA", - .microvolts = 1800000, - .gpio = -EINVAL, - .init_data = &wm8994_fixed_voltage0_init_data, -}; - -static struct fixed_voltage_config wm8994_fixed_voltage1_config = { - .supply_name = "V_BAT", - .microvolts = 3700000, - .gpio = -EINVAL, - .init_data = &wm8994_fixed_voltage1_init_data, -}; - -static struct platform_device wm8994_fixed_voltage0 = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &wm8994_fixed_voltage0_config, - }, -}; - -static struct platform_device wm8994_fixed_voltage1 = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &wm8994_fixed_voltage1_config, - }, -}; - -static struct regulator_consumer_supply wm8994_avdd1_supply = - REGULATOR_SUPPLY("AVDD1", "5-001a"); - -static struct regulator_consumer_supply wm8994_dcvdd_supply = - REGULATOR_SUPPLY("DCVDD", "5-001a"); - -static struct regulator_init_data wm8994_ldo1_data = { - .constraints = { - .name = "AVDD1_3.0V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &wm8994_avdd1_supply, -}; - -static struct regulator_init_data wm8994_ldo2_data = { - .constraints = { - .name = "DCVDD_1.0V", - }, - .num_consumer_supplies = 1, - .consumer_supplies = &wm8994_dcvdd_supply, -}; - -static struct wm8994_pdata wm8994_platform_data = { - /* configure gpio1 function: 0x0001(Logic level input/output) */ - .gpio_defaults[0] = 0x0001, - /* configure gpio3/4/5/7 function for AIF2 voice */ - .gpio_defaults[2] = 0x8100, - .gpio_defaults[3] = 0x8100, - .gpio_defaults[4] = 0x8100, - .gpio_defaults[6] = 0x0100, - /* configure gpio8/9/10/11 function for AIF3 BT */ - .gpio_defaults[7] = 0x8100, - .gpio_defaults[8] = 0x0100, - .gpio_defaults[9] = 0x0100, - .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, &wm8994_ldo2_data }, -}; - -/* GPIO I2C PMIC */ -#define AP_I2C_GPIO_PMIC_BUS_4 4 -static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { - .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */ - .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */ -}; - -static struct platform_device aquila_i2c_gpio_pmic = { - .name = "i2c-gpio", - .id = AP_I2C_GPIO_PMIC_BUS_4, - .dev = { - .platform_data = &aquila_i2c_gpio_pmic_data, - }, -}; - -static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { -#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) - { - /* 0xCC when SRAD = 0 */ - I2C_BOARD_INFO("max8998", 0xCC >> 1), - .platform_data = &aquila_max8998_pdata, - }, -#endif -}; - -/* GPIO I2C AP 1.8V */ -#define AP_I2C_GPIO_BUS_5 5 -static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = { - .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ - .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ -}; - -static struct platform_device aquila_i2c_gpio5 = { - .name = "i2c-gpio", - .id = AP_I2C_GPIO_BUS_5, - .dev = { - .platform_data = &aquila_i2c_gpio5_data, - }, -}; - -static struct i2c_board_info i2c_gpio5_devs[] __initdata = { - { - /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ - I2C_BOARD_INFO("wm8994", 0x1a), - .platform_data = &wm8994_platform_data, - }, -}; - -/* PMIC Power button */ -static struct gpio_keys_button aquila_gpio_keys_table[] = { - { - .code = KEY_POWER, - .gpio = S5PV210_GPH2(6), - .desc = "gpio-keys: KEY_POWER", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data aquila_gpio_keys_data = { - .buttons = aquila_gpio_keys_table, - .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table), -}; - -static struct platform_device aquila_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &aquila_gpio_keys_data, - }, -}; - -static void __init aquila_pmic_init(void) -{ - /* AP_PMIC_IRQ: EINT7 */ - s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP); - - /* nPower: EINT22 */ - s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP); -} - -/* MoviNAND */ -static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -/* Wireless LAN */ -static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_EXTERNAL, - /* ext_cd_{init,cleanup} callbacks will be added later */ -}; - -/* External Flash */ -#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4) -#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4) -static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = AQUILA_EXT_FLASH_CD, - .ext_cd_gpio_invert = 1, -}; - -static void aquila_setup_sdhci(void) -{ - gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN"); - - s3c_sdhci0_set_platdata(&aquila_hsmmc0_data); - s3c_sdhci1_set_platdata(&aquila_hsmmc1_data); - s3c_sdhci2_set_platdata(&aquila_hsmmc2_data); -}; - -/* Audio device */ -static struct platform_device aquila_device_audio = { - .name = "smdk-audio", - .id = -1, -}; - -static struct platform_device *aquila_devices[] __initdata = { - &aquila_i2c_gpio_pmic, - &aquila_i2c_gpio5, - &aquila_device_gpiokeys, - &aquila_device_audio, - &s3c_device_fb, - &s5p_device_onenand, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, - &s5pv210_device_iis0, - &wm8994_fixed_voltage0, - &wm8994_fixed_voltage1, -}; - -static void __init aquila_sound_init(void) -{ - unsigned int gpio; - - /* CODEC_XTAL_EN - * - * The Aquila board have a oscillator which provide main clock - * to WM8994 codec. The oscillator provide 24MHz clock to WM8994 - * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator. - * */ - gpio = S5PV210_GPH3(2); /* XEINT_26 */ - gpio_request(gpio, "CODEC_XTAL_EN"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - - /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. - * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) - * because it needs 24MHz clock to operate WM8994 codec. - */ - __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); -} - -static void __init aquila_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init aquila_machine_init(void) -{ - /* PMIC */ - aquila_pmic_init(); - i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, - ARRAY_SIZE(i2c_gpio_pmic_devs)); - /* SDHCI */ - aquila_setup_sdhci(); - - s3c_fimc_setname(0, "s5p-fimc"); - s3c_fimc_setname(1, "s5p-fimc"); - s3c_fimc_setname(2, "s5p-fimc"); - - /* SOUND */ - aquila_sound_init(); - i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, - ARRAY_SIZE(i2c_gpio5_devs)); - - /* FB */ - s3c_fb_set_platdata(&aquila_lcd_pdata); - - platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices)); -} - -MACHINE_START(AQUILA, "Aquila") - /* Maintainers: - Marek Szyprowski <m.szyprowski@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = aquila_map_io, - .init_machine = aquila_machine_init, - .init_time = samsung_timer_init, - .restart = s5pv210_restart, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c deleted file mode 100644 index c1ce921c4088..000000000000 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ /dev/null @@ -1,916 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-goni.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/fb.h> -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/i2c/atmel_mxt_ts.h> -#include <linux/mfd/max8998.h> -#include <linux/mfd/wm8994/pdata.h> -#include <linux/regulator/fixed.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> -#include <linux/lcd.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/interrupt.h> -#include <linux/platform_data/s3c-hsotg.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <video/samsung_fimd.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/gpio-cfg.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/fb.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/keypad.h> -#include <plat/sdhci.h> -#include <plat/clock.h> -#include <plat/samsung-time.h> -#include <plat/mfc.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define GONI_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define GONI_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = GONI_UCON_DEFAULT, - .ulcon = GONI_ULCON_DEFAULT, - .ufcon = GONI_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = GONI_UCON_DEFAULT, - .ulcon = GONI_ULCON_DEFAULT, - .ufcon = GONI_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = GONI_UCON_DEFAULT, - .ulcon = GONI_ULCON_DEFAULT, - .ufcon = GONI_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = GONI_UCON_DEFAULT, - .ulcon = GONI_ULCON_DEFAULT, - .ufcon = GONI_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, - }, -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win goni_fb_win0 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 480, - .yres = 800, - .virtual_x = 480, - .virtual_y = 2 * 800, -}; - -static struct fb_videomode goni_lcd_timing = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, -}; - -static struct s3c_fb_platdata goni_lcd_pdata __initdata = { - .win[0] = &goni_fb_win0, - .vtiming = &goni_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN - | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5pv210_fb_gpio_setup_24bpp, -}; - -static int lcd_power_on(struct lcd_device *ld, int enable) -{ - return 1; -} - -static int reset_lcd(struct lcd_device *ld) -{ - static unsigned int first = 1; - int reset_gpio = -1; - - reset_gpio = S5PV210_MP05(5); - - if (first) { - gpio_request(reset_gpio, "MLCD_RST"); - first = 0; - } - - gpio_direction_output(reset_gpio, 1); - return 1; -} - -static struct lcd_platform_data goni_lcd_platform_data = { - .reset = reset_lcd, - .power_on = lcd_power_on, - .lcd_enabled = 0, - .reset_delay = 120, /* 120ms */ - .power_on_delay = 25, /* 25ms */ - .power_off_delay = 200, /* 200ms */ -}; - -#define LCD_BUS_NUM 3 -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "s6e63m0", - .platform_data = &goni_lcd_platform_data, - .max_speed_hz = 1200000, - .bus_num = LCD_BUS_NUM, - .chip_select = 0, - .mode = SPI_MODE_3, - .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */ - }, -}; - -static struct spi_gpio_platform_data lcd_spi_gpio_data = { - .sck = S5PV210_MP04(1), /* DISPLAY_CLK */ - .mosi = S5PV210_MP04(3), /* DISPLAY_SI */ - .miso = SPI_GPIO_NO_MISO, - .num_chipselect = 1, -}; - -static struct platform_device goni_spi_gpio = { - .name = "spi_gpio", - .id = LCD_BUS_NUM, - .dev = { - .parent = &s3c_device_fb.dev, - .platform_data = &lcd_spi_gpio_data, - }, -}; - -/* KEYPAD */ -static uint32_t keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(0, 1, KEY_MENU), /* Send */ - KEY(0, 2, KEY_BACK), /* End */ - KEY(1, 1, KEY_CONFIG), /* Half shot */ - KEY(1, 2, KEY_VOLUMEUP), - KEY(2, 1, KEY_CAMERA), /* Full shot */ - KEY(2, 2, KEY_VOLUMEDOWN), -}; - -static struct matrix_keymap_data keymap_data __initdata = { - .keymap = keymap, - .keymap_size = ARRAY_SIZE(keymap), -}; - -static struct samsung_keypad_platdata keypad_data __initdata = { - .keymap_data = &keymap_data, - .rows = 3, - .cols = 3, -}; - -/* Radio */ -static struct i2c_board_info i2c1_devs[] __initdata = { - { - I2C_BOARD_INFO("si470x", 0x10), - }, -}; - -static void __init goni_radio_init(void) -{ - int gpio; - - gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */ - gpio_request(gpio, "FM_INT"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - i2c1_devs[0].irq = gpio_to_irq(gpio); - - gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */ - gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST"); -} - -/* TSP */ -static struct mxt_platform_data qt602240_platform_data = { - .irqflags = IRQF_TRIGGER_FALLING, -}; - -static struct s3c2410_platform_i2c i2c2_data __initdata = { - .flags = 0, - .bus_num = 2, - .slave_addr = 0x10, - .frequency = 400 * 1000, - .sda_delay = 100, -}; - -static struct i2c_board_info i2c2_devs[] __initdata = { - { - I2C_BOARD_INFO("qt602240_ts", 0x4a), - .platform_data = &qt602240_platform_data, - }, -}; - -static void __init goni_tsp_init(void) -{ - int gpio; - - gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */ - gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON"); - gpio_export(gpio, 0); - - gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */ - gpio_request(gpio, "TSP_INT"); - - s5p_register_gpio_interrupt(gpio); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - i2c2_devs[0].irq = gpio_to_irq(gpio); -} - -/* USB OTG */ -static struct s3c_hsotg_plat goni_hsotg_pdata; - -/* MAX8998 regulators */ -#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) - -static struct regulator_consumer_supply goni_ldo3_consumers[] = { - REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), -}; - -static struct regulator_consumer_supply goni_ldo5_consumers[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), -}; - -static struct regulator_consumer_supply goni_ldo8_consumers[] = { - REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), - REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), -}; - -static struct regulator_consumer_supply goni_ldo11_consumers[] = { - REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */ -}; - -static struct regulator_consumer_supply goni_ldo13_consumers[] = { - REGULATOR_SUPPLY("vdda", "0-0030"), /* "CAM_A_2.8V" */ -}; - -static struct regulator_consumer_supply goni_ldo14_consumers[] = { - REGULATOR_SUPPLY("vdd_core", "0-0030"), /* "CAM_CIF_1.8V" */ -}; - -static struct regulator_init_data goni_ldo2_data = { - .constraints = { - .name = "VALIVE_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data goni_ldo3_data = { - .constraints = { - .name = "VUSB+MIPI_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers), - .consumer_supplies = goni_ldo3_consumers, -}; - -static struct regulator_init_data goni_ldo4_data = { - .constraints = { - .name = "VDAC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo5_data = { - .constraints = { - .name = "VTF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), - .consumer_supplies = goni_ldo5_consumers, -}; - -static struct regulator_init_data goni_ldo6_data = { - .constraints = { - .name = "VCC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo7_data = { - .constraints = { - .name = "VLCD_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data goni_ldo8_data = { - .constraints = { - .name = "VUSB+VADC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers), - .consumer_supplies = goni_ldo8_consumers, -}; - -static struct regulator_init_data goni_ldo9_data = { - .constraints = { - .name = "VCC+VCAM_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo10_data = { - .constraints = { - .name = "VPLL_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .boot_on = 1, - }, -}; - -static struct regulator_init_data goni_ldo11_data = { - .constraints = { - .name = "CAM_IO_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo11_consumers), - .consumer_supplies = goni_ldo11_consumers, -}; - -static struct regulator_init_data goni_ldo12_data = { - .constraints = { - .name = "CAM_ISP_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo13_data = { - .constraints = { - .name = "CAM_A_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo13_consumers), - .consumer_supplies = goni_ldo13_consumers, -}; - -static struct regulator_init_data goni_ldo14_data = { - .constraints = { - .name = "CAM_CIF_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo14_consumers), - .consumer_supplies = goni_ldo14_consumers, -}; - -static struct regulator_init_data goni_ldo15_data = { - .constraints = { - .name = "CAM_AF_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo16_data = { - .constraints = { - .name = "VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo17_data = { - .constraints = { - .name = "VCC_3.0V_LCD", - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -/* BUCK */ -static struct regulator_consumer_supply buck1_consumer = - REGULATOR_SUPPLY("vddarm", NULL); - -static struct regulator_consumer_supply buck2_consumer = - REGULATOR_SUPPLY("vddint", NULL); - -static struct regulator_consumer_supply buck3_consumer = - REGULATOR_SUPPLY("vdet", "s5p-sdo"); - - -static struct regulator_init_data goni_buck1_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck1_consumer, -}; - -static struct regulator_init_data goni_buck2_data = { - .constraints = { - .name = "VINT_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck2_consumer, -}; - -static struct regulator_init_data goni_buck3_data = { - .constraints = { - .name = "VCC_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck3_consumer, -}; - -static struct regulator_init_data goni_buck4_data = { - .constraints = { - .name = "CAM_CORE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct max8998_regulator_data goni_regulators[] = { - { MAX8998_LDO2, &goni_ldo2_data }, - { MAX8998_LDO3, &goni_ldo3_data }, - { MAX8998_LDO4, &goni_ldo4_data }, - { MAX8998_LDO5, &goni_ldo5_data }, - { MAX8998_LDO6, &goni_ldo6_data }, - { MAX8998_LDO7, &goni_ldo7_data }, - { MAX8998_LDO8, &goni_ldo8_data }, - { MAX8998_LDO9, &goni_ldo9_data }, - { MAX8998_LDO10, &goni_ldo10_data }, - { MAX8998_LDO11, &goni_ldo11_data }, - { MAX8998_LDO12, &goni_ldo12_data }, - { MAX8998_LDO13, &goni_ldo13_data }, - { MAX8998_LDO14, &goni_ldo14_data }, - { MAX8998_LDO15, &goni_ldo15_data }, - { MAX8998_LDO16, &goni_ldo16_data }, - { MAX8998_LDO17, &goni_ldo17_data }, - { MAX8998_BUCK1, &goni_buck1_data }, - { MAX8998_BUCK2, &goni_buck2_data }, - { MAX8998_BUCK3, &goni_buck3_data }, - { MAX8998_BUCK4, &goni_buck4_data }, -}; - -static struct max8998_platform_data goni_max8998_pdata = { - .num_regulators = ARRAY_SIZE(goni_regulators), - .regulators = goni_regulators, - .buck1_set1 = S5PV210_GPH0(3), - .buck1_set2 = S5PV210_GPH0(4), - .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, - .buck2_voltage = { 1200000, 1200000 }, -}; -#endif - -static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - REGULATOR_SUPPLY("DBVDD", "5-001a"), - REGULATOR_SUPPLY("AVDD2", "5-001a"), - REGULATOR_SUPPLY("CPVDD", "5-001a"), -}; - -static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - REGULATOR_SUPPLY("SPKVDD1", "5-001a"), - REGULATOR_SUPPLY("SPKVDD2", "5-001a"), -}; - -static struct regulator_init_data wm8994_fixed_voltage0_init_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), - .consumer_supplies = wm8994_fixed_voltage0_supplies, -}; - -static struct regulator_init_data wm8994_fixed_voltage1_init_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), - .consumer_supplies = wm8994_fixed_voltage1_supplies, -}; - -static struct fixed_voltage_config wm8994_fixed_voltage0_config = { - .supply_name = "VCC_1.8V_PDA", - .microvolts = 1800000, - .gpio = -EINVAL, - .init_data = &wm8994_fixed_voltage0_init_data, -}; - -static struct fixed_voltage_config wm8994_fixed_voltage1_config = { - .supply_name = "V_BAT", - .microvolts = 3700000, - .gpio = -EINVAL, - .init_data = &wm8994_fixed_voltage1_init_data, -}; - -static struct platform_device wm8994_fixed_voltage0 = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &wm8994_fixed_voltage0_config, - }, -}; - -static struct platform_device wm8994_fixed_voltage1 = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &wm8994_fixed_voltage1_config, - }, -}; - -static struct regulator_consumer_supply wm8994_avdd1_supply = - REGULATOR_SUPPLY("AVDD1", "5-001a"); - -static struct regulator_consumer_supply wm8994_dcvdd_supply = - REGULATOR_SUPPLY("DCVDD", "5-001a"); - -static struct regulator_init_data wm8994_ldo1_data = { - .constraints = { - .name = "AVDD1_3.0V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &wm8994_avdd1_supply, -}; - -static struct regulator_init_data wm8994_ldo2_data = { - .constraints = { - .name = "DCVDD_1.0V", - }, - .num_consumer_supplies = 1, - .consumer_supplies = &wm8994_dcvdd_supply, -}; - -static struct wm8994_pdata wm8994_platform_data = { - /* configure gpio1 function: 0x0001(Logic level input/output) */ - .gpio_defaults[0] = 0x0001, - /* configure gpio3/4/5/7 function for AIF2 voice */ - .gpio_defaults[2] = 0x8100, - .gpio_defaults[3] = 0x8100, - .gpio_defaults[4] = 0x8100, - .gpio_defaults[6] = 0x0100, - /* configure gpio8/9/10/11 function for AIF3 BT */ - .gpio_defaults[7] = 0x8100, - .gpio_defaults[8] = 0x0100, - .gpio_defaults[9] = 0x0100, - .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, &wm8994_ldo2_data }, -}; - -/* GPIO I2C PMIC */ -#define AP_I2C_GPIO_PMIC_BUS_4 4 -static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = { - .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */ - .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */ -}; - -static struct platform_device goni_i2c_gpio_pmic = { - .name = "i2c-gpio", - .id = AP_I2C_GPIO_PMIC_BUS_4, - .dev = { - .platform_data = &goni_i2c_gpio_pmic_data, - }, -}; - -static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { -#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) - { - /* 0xCC when SRAD = 0 */ - I2C_BOARD_INFO("max8998", 0xCC >> 1), - .platform_data = &goni_max8998_pdata, - }, -#endif -}; - -/* GPIO I2C AP 1.8V */ -#define AP_I2C_GPIO_BUS_5 5 -static struct i2c_gpio_platform_data goni_i2c_gpio5_data = { - .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ - .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ -}; - -static struct platform_device goni_i2c_gpio5 = { - .name = "i2c-gpio", - .id = AP_I2C_GPIO_BUS_5, - .dev = { - .platform_data = &goni_i2c_gpio5_data, - }, -}; - -static struct i2c_board_info i2c_gpio5_devs[] __initdata = { - { - /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ - I2C_BOARD_INFO("wm8994", 0x1a), - .platform_data = &wm8994_platform_data, - }, -}; - -/* PMIC Power button */ -static struct gpio_keys_button goni_gpio_keys_table[] = { - { - .code = KEY_POWER, - .gpio = S5PV210_GPH2(6), - .desc = "gpio-keys: KEY_POWER", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data goni_gpio_keys_data = { - .buttons = goni_gpio_keys_table, - .nbuttons = ARRAY_SIZE(goni_gpio_keys_table), -}; - -static struct platform_device goni_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &goni_gpio_keys_data, - }, -}; - -static void __init goni_pmic_init(void) -{ - /* AP_PMIC_IRQ: EINT7 */ - s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP); - - /* nPower: EINT22 */ - s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP); -} - -/* MoviNAND */ -static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -/* Wireless LAN */ -static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_EXTERNAL, - /* ext_cd_{init,cleanup} callbacks will be added later */ -}; - -/* External Flash */ -#define GONI_EXT_FLASH_EN S5PV210_MP05(4) -#define GONI_EXT_FLASH_CD S5PV210_GPH3(4) -static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = GONI_EXT_FLASH_CD, - .ext_cd_gpio_invert = 1, -}; - -static struct regulator_consumer_supply mmc2_supplies[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), -}; - -static struct regulator_init_data mmc2_fixed_voltage_init_data = { - .constraints = { - .name = "V_TF_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies), - .consumer_supplies = mmc2_supplies, -}; - -static struct fixed_voltage_config mmc2_fixed_voltage_config = { - .supply_name = "EXT_FLASH_EN", - .microvolts = 2800000, - .gpio = GONI_EXT_FLASH_EN, - .enable_high = true, - .init_data = &mmc2_fixed_voltage_init_data, -}; - -static struct platform_device mmc2_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = 2, - .dev = { - .platform_data = &mmc2_fixed_voltage_config, - }, -}; - -static void goni_setup_sdhci(void) -{ - s3c_sdhci0_set_platdata(&goni_hsmmc0_data); - s3c_sdhci1_set_platdata(&goni_hsmmc1_data); - s3c_sdhci2_set_platdata(&goni_hsmmc2_data); -}; - -/* Audio device */ -static struct platform_device goni_device_audio = { - .name = "smdk-audio", - .id = -1, -}; - -static struct platform_device *goni_devices[] __initdata = { - &s3c_device_fb, - &s5p_device_onenand, - &goni_spi_gpio, - &goni_i2c_gpio_pmic, - &goni_i2c_gpio5, - &goni_device_audio, - &mmc2_fixed_voltage, - &goni_device_gpiokeys, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &s5p_device_mixer, - &s5p_device_sdo, - &s3c_device_i2c0, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s5pv210_device_iis0, - &s3c_device_usb_hsotg, - &samsung_device_keypad, - &s3c_device_i2c1, - &s3c_device_i2c2, - &wm8994_fixed_voltage0, - &wm8994_fixed_voltage1, -}; - -static void __init goni_sound_init(void) -{ - /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. - * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) - * because it needs 24MHz clock to operate WM8994 codec. - */ - __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); -} - -static void __init goni_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); - s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init goni_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init goni_machine_init(void) -{ - /* Radio: call before I2C 1 registeration */ - goni_radio_init(); - - /* I2C0 */ - s3c_i2c0_set_platdata(NULL); - - /* I2C1 */ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - - /* TSP: call before I2C 2 registeration */ - goni_tsp_init(); - - /* I2C2 */ - s3c_i2c2_set_platdata(&i2c2_data); - i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs)); - - /* PMIC */ - goni_pmic_init(); - i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, - ARRAY_SIZE(i2c_gpio_pmic_devs)); - /* SDHCI */ - goni_setup_sdhci(); - - /* SOUND */ - goni_sound_init(); - i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, - ARRAY_SIZE(i2c_gpio5_devs)); - - /* FB */ - s3c_fb_set_platdata(&goni_lcd_pdata); - - s3c_hsotg_set_platdata(&goni_hsotg_pdata); - - /* SPI */ - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - - /* KEYPAD */ - samsung_keypad_set_platdata(&keypad_data); - - platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); -} - -MACHINE_START(GONI, "GONI") - /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = goni_map_io, - .init_machine = goni_machine_init, - .init_time = samsung_timer_init, - .reserve = &goni_reserve, - .restart = s5pv210_restart, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c deleted file mode 100644 index 448e1d2eeed6..000000000000 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ /dev/null @@ -1,159 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/i2c.h> -#include <linux/device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/devs.h> -#include <plat/cpu.h> -#include <linux/platform_data/ata-samsung_cf.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/pm.h> -#include <plat/samsung-time.h> -#include <plat/mfc.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKC110_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKC110_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKC110_UCON_DEFAULT, - .ulcon = SMDKC110_ULCON_DEFAULT, - .ufcon = SMDKC110_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKC110_UCON_DEFAULT, - .ulcon = SMDKC110_ULCON_DEFAULT, - .ufcon = SMDKC110_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKC110_UCON_DEFAULT, - .ulcon = SMDKC110_ULCON_DEFAULT, - .ufcon = SMDKC110_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKC110_UCON_DEFAULT, - .ulcon = SMDKC110_ULCON_DEFAULT, - .ufcon = SMDKC110_UFCON_DEFAULT, - }, -}; - -static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = { - .setup_gpio = s5pv210_ide_setup_gpio, -}; - -static struct platform_device *smdkc110_devices[] __initdata = { - &s5pv210_device_iis0, - &s5pv210_device_ac97, - &s5pv210_device_spdif, - &s3c_device_cfcon, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_i2c2, - &s3c_device_rtc, - &s3c_device_wdt, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, -}; - -static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = { - /* To Be Updated */ -}; - -static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = { - /* To Be Updated */ -}; - -static void __init smdkc110_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init smdkc110_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init smdkc110_machine_init(void) -{ - s3c_pm_init(); - - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); - s3c_i2c2_set_platdata(NULL); - i2c_register_board_info(0, smdkc110_i2c_devs0, - ARRAY_SIZE(smdkc110_i2c_devs0)); - i2c_register_board_info(1, smdkc110_i2c_devs1, - ARRAY_SIZE(smdkc110_i2c_devs1)); - i2c_register_board_info(2, smdkc110_i2c_devs2, - ARRAY_SIZE(smdkc110_i2c_devs2)); - - s3c_ide_set_platdata(&smdkc110_ide_pdata); - - platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices)); -} - -MACHINE_START(SMDKC110, "SMDKC110") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = smdkc110_map_io, - .init_machine = smdkc110_machine_init, - .init_time = samsung_timer_init, - .restart = s5pv210_restart, - .reserve = &smdkc110_reserve, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c deleted file mode 100644 index 2a6655fb63e7..000000000000 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ /dev/null @@ -1,337 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/device.h> -#include <linux/dm9000.h> -#include <linux/fb.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/pwm_backlight.h> -#include <linux/platform_data/s3c-hsotg.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/regs-srom.h> -#include <plat/gpio-cfg.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/adc.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <linux/platform_data/ata-samsung_cf.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/keypad.h> -#include <plat/pm.h> -#include <plat/fb.h> -#include <plat/samsung-time.h> -#include <plat/backlight.h> -#include <plat/mfc.h> -#include <plat/clock.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKV210_UCON_DEFAULT, - .ulcon = SMDKV210_ULCON_DEFAULT, - .ufcon = SMDKV210_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKV210_UCON_DEFAULT, - .ulcon = SMDKV210_ULCON_DEFAULT, - .ufcon = SMDKV210_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKV210_UCON_DEFAULT, - .ulcon = SMDKV210_ULCON_DEFAULT, - .ufcon = SMDKV210_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKV210_UCON_DEFAULT, - .ulcon = SMDKV210_ULCON_DEFAULT, - .ufcon = SMDKV210_UFCON_DEFAULT, - }, -}; - -static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = { - .setup_gpio = s5pv210_ide_setup_gpio, -}; - -static uint32_t smdkv210_keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), - KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), - KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), - KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) -}; - -static struct matrix_keymap_data smdkv210_keymap_data __initdata = { - .keymap = smdkv210_keymap, - .keymap_size = ARRAY_SIZE(smdkv210_keymap), -}; - -static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { - .keymap_data = &smdkv210_keymap_data, - .rows = 8, - .cols = 8, -}; - -static struct resource smdkv210_dm9000_resources[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5, 1), - [1] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5 + 2, 1), - [2] = DEFINE_RES_NAMED(IRQ_EINT(9), 1, NULL, IORESOURCE_IRQ \ - | IORESOURCE_IRQ_HIGHLEVEL), -}; - -static struct dm9000_plat_data smdkv210_dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, - .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 }, -}; - -static struct platform_device smdkv210_dm9000 = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources), - .resource = smdkv210_dm9000_resources, - .dev = { - .platform_data = &smdkv210_dm9000_platdata, - }, -}; - -static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0"); - gpio_free(S5PV210_GPD0(3)); -#endif - - /* fire nRESET on power up */ - gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0"); - - gpio_set_value(S5PV210_GPH0(6), 0); - mdelay(10); - - gpio_set_value(S5PV210_GPH0(6), 1); - mdelay(10); - - gpio_free(S5PV210_GPH0(6)); - } else { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0"); - gpio_free(S5PV210_GPD0(3)); -#endif - } -} - -static struct plat_lcd_data smdkv210_lcd_lte480wv_data = { - .set_power = smdkv210_lte480wv_set_power, -}; - -static struct platform_device smdkv210_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &smdkv210_lcd_lte480wv_data, -}; - -static struct s3c_fb_pd_win smdkv210_fb_win0 = { - .max_bpp = 32, - .default_bpp = 24, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdkv210_lcd_timing = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { - .win[0] = &smdkv210_fb_win0, - .vtiming = &smdkv210_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5pv210_fb_gpio_setup_24bpp, -}; - -/* USB OTG */ -static struct s3c_hsotg_plat smdkv210_hsotg_pdata; - -static struct platform_device *smdkv210_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_cfcon, - &s3c_device_fb, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_i2c2, - &samsung_device_pwm, - &s3c_device_rtc, - &s3c_device_ts, - &s3c_device_usb_hsotg, - &s3c_device_wdt, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, - &s5p_device_jpeg, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &s5pv210_device_ac97, - &s5pv210_device_iis0, - &s5pv210_device_spdif, - &samsung_asoc_idma, - &samsung_device_keypad, - &smdkv210_dm9000, - &smdkv210_lcd_lte480wv, -}; - -static void __init smdkv210_dm9000_init(void) -{ - unsigned int tmp; - - gpio_request(S5PV210_MP01(5), "nCS5"); - s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2)); - gpio_free(S5PV210_MP01(5)); - - tmp = (5 << S5P_SROM_BCX__TACC__SHIFT); - __raw_writel(tmp, S5P_SROM_BC5); - - tmp = __raw_readl(S5P_SROM_BW); - tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT); - tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT); - __raw_writel(tmp, S5P_SROM_BW); -} - -static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = { - /* To Be Updated */ -}; - -static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = { - /* To Be Updated */ -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { - .no = S5PV210_GPD0(3), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdkv210_bl_data = { - .pwm_id = 3, - .pwm_period_ns = 1000, - .enable_gpio = -1, -}; - -static void __init smdkv210_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); - s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); -} - -static void __init smdkv210_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init smdkv210_machine_init(void) -{ - s3c_pm_init(); - - smdkv210_dm9000_init(); - - samsung_keypad_set_platdata(&smdkv210_keypad_data); - s3c24xx_ts_set_platdata(NULL); - - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); - s3c_i2c2_set_platdata(NULL); - i2c_register_board_info(0, smdkv210_i2c_devs0, - ARRAY_SIZE(smdkv210_i2c_devs0)); - i2c_register_board_info(1, smdkv210_i2c_devs1, - ARRAY_SIZE(smdkv210_i2c_devs1)); - i2c_register_board_info(2, smdkv210_i2c_devs2, - ARRAY_SIZE(smdkv210_i2c_devs2)); - - s3c_ide_set_platdata(&smdkv210_ide_pdata); - - s3c_fb_set_platdata(&smdkv210_lcd0_pdata); - - s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata); - - platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); - - samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); -} - -MACHINE_START(SMDKV210, "SMDKV210") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = smdkv210_map_io, - .init_machine = smdkv210_machine_init, - .init_time = samsung_timer_init, - .restart = s5pv210_restart, - .reserve = &smdkv210_reserve, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c deleted file mode 100644 index 157805529f26..000000000000 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ /dev/null @@ -1,135 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-torbreck.c - * - * Copyright (c) 2010 aESOP Community - * http://www.aesop.or.kr/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/devs.h> -#include <plat/cpu.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/samsung-time.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = TORBRECK_UCON_DEFAULT, - .ulcon = TORBRECK_ULCON_DEFAULT, - .ufcon = TORBRECK_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = TORBRECK_UCON_DEFAULT, - .ulcon = TORBRECK_ULCON_DEFAULT, - .ufcon = TORBRECK_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = TORBRECK_UCON_DEFAULT, - .ulcon = TORBRECK_ULCON_DEFAULT, - .ufcon = TORBRECK_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = TORBRECK_UCON_DEFAULT, - .ulcon = TORBRECK_ULCON_DEFAULT, - .ufcon = TORBRECK_UFCON_DEFAULT, - }, -}; - -static struct platform_device *torbreck_devices[] __initdata = { - &s5pv210_device_iis0, - &s3c_device_cfcon, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_i2c2, - &s3c_device_rtc, - &s3c_device_wdt, -}; - -static struct i2c_board_info torbreck_i2c_devs0[] __initdata = { - /* To Be Updated */ -}; - -static struct i2c_board_info torbreck_i2c_devs1[] __initdata = { - /* To Be Updated */ -}; - -static struct i2c_board_info torbreck_i2c_devs2[] __initdata = { - /* To Be Updated */ -}; - -static void __init torbreck_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init torbreck_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); - s3c_i2c2_set_platdata(NULL); - i2c_register_board_info(0, torbreck_i2c_devs0, - ARRAY_SIZE(torbreck_i2c_devs0)); - i2c_register_board_info(1, torbreck_i2c_devs1, - ARRAY_SIZE(torbreck_i2c_devs1)); - i2c_register_board_info(2, torbreck_i2c_devs2, - ARRAY_SIZE(torbreck_i2c_devs2)); - - platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices)); -} - -MACHINE_START(TORBRECK, "TORBRECK") - /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = torbreck_map_io, - .init_machine = torbreck_machine_init, - .init_time = samsung_timer_init, - .restart = s5pv210_restart, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 3cf3f9c8ddd1..123163dd2ab0 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv210/pm.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. * http://www.samsung.com * * S5PV210 - Power Management support @@ -19,65 +19,28 @@ #include <linux/syscore_ops.h> #include <linux/io.h> -#include <plat/cpu.h> -#include <plat/pm.h> +#include <asm/cacheflush.h> +#include <asm/suspend.h> + +#include <plat/pm-common.h> -#include <mach/regs-irq.h> #include <mach/regs-clock.h> -static struct sleep_save s5pv210_core_save[] = { - /* Clock source */ - SAVE_ITEM(S5P_CLK_SRC0), - SAVE_ITEM(S5P_CLK_SRC1), - SAVE_ITEM(S5P_CLK_SRC2), - SAVE_ITEM(S5P_CLK_SRC3), - SAVE_ITEM(S5P_CLK_SRC4), - SAVE_ITEM(S5P_CLK_SRC5), - SAVE_ITEM(S5P_CLK_SRC6), - - /* Clock source Mask */ - SAVE_ITEM(S5P_CLK_SRC_MASK0), - SAVE_ITEM(S5P_CLK_SRC_MASK1), - - /* Clock Divider */ - SAVE_ITEM(S5P_CLK_DIV0), - SAVE_ITEM(S5P_CLK_DIV1), - SAVE_ITEM(S5P_CLK_DIV2), - SAVE_ITEM(S5P_CLK_DIV3), - SAVE_ITEM(S5P_CLK_DIV4), - SAVE_ITEM(S5P_CLK_DIV5), - SAVE_ITEM(S5P_CLK_DIV6), - SAVE_ITEM(S5P_CLK_DIV7), - - /* Clock Main Gate */ - SAVE_ITEM(S5P_CLKGATE_MAIN0), - SAVE_ITEM(S5P_CLKGATE_MAIN1), - SAVE_ITEM(S5P_CLKGATE_MAIN2), - - /* Clock source Peri Gate */ - SAVE_ITEM(S5P_CLKGATE_PERI0), - SAVE_ITEM(S5P_CLKGATE_PERI1), - - /* Clock source SCLK Gate */ - SAVE_ITEM(S5P_CLKGATE_SCLK0), - SAVE_ITEM(S5P_CLKGATE_SCLK1), - - /* Clock IP Clock gate */ - SAVE_ITEM(S5P_CLKGATE_IP0), - SAVE_ITEM(S5P_CLKGATE_IP1), - SAVE_ITEM(S5P_CLKGATE_IP2), - SAVE_ITEM(S5P_CLKGATE_IP3), - SAVE_ITEM(S5P_CLKGATE_IP4), - - /* Clock Blcok and Bus gate */ - SAVE_ITEM(S5P_CLKGATE_BLOCK), - SAVE_ITEM(S5P_CLKGATE_BUS0), +#include "common.h" +static struct sleep_save s5pv210_core_save[] = { /* Clock ETC */ - SAVE_ITEM(S5P_CLK_OUT), SAVE_ITEM(S5P_MDNIE_SEL), }; +/* + * VIC wake-up support (TODO) + */ +static u32 s5pv210_irqwake_intmask = 0xffffffff; + +/* + * Suspend helpers. + */ static int s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; @@ -102,8 +65,12 @@ static void s5pv210_pm_prepare(void) { unsigned int tmp; + /* Set wake-up mask registers */ + __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK); + __raw_writel(s5pv210_irqwake_intmask, S5P_WAKEUP_MASK); + /* ensure at least INFORM0 has the resume address */ - __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); + __raw_writel(virt_to_phys(s5pv210_cpu_resume), S5P_INFORM0); tmp = __raw_readl(S5P_SLEEP_CFG); tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN); @@ -123,26 +90,70 @@ static void s5pv210_pm_prepare(void) s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif) +/* + * Suspend operations. + */ +static int s5pv210_suspend_enter(suspend_state_t state) { - pm_cpu_prep = s5pv210_pm_prepare; - pm_cpu_sleep = s5pv210_cpu_suspend; + int ret; + + s3c_pm_debug_init(); + + S3C_PMDBG("%s: suspending the system...\n", __func__); + + S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__, + s5pv210_irqwake_intmask, exynos_get_eint_wake_mask()); + + if (s5pv210_irqwake_intmask == -1U + && exynos_get_eint_wake_mask() == -1U) { + pr_err("%s: No wake-up sources!\n", __func__); + pr_err("%s: Aborting sleep\n", __func__); + return -EINVAL; + } + + s3c_pm_save_uarts(); + s5pv210_pm_prepare(); + flush_cache_all(); + s3c_pm_check_store(); + + ret = cpu_suspend(0, s5pv210_cpu_suspend); + if (ret) + return ret; + + s3c_pm_restore_uarts(); + + S3C_PMDBG("%s: wakeup stat: %08x\n", __func__, + __raw_readl(S5P_WAKEUP_STAT)); + + s3c_pm_check_restore(); + + S3C_PMDBG("%s: resuming the system...\n", __func__); return 0; } -static struct subsys_interface s5pv210_pm_interface = { - .name = "s5pv210_pm", - .subsys = &s5pv210_subsys, - .add_dev = s5pv210_pm_add, -}; +static int s5pv210_suspend_prepare(void) +{ + s3c_pm_check_prepare(); -static __init int s5pv210_pm_drvinit(void) + return 0; +} + +static void s5pv210_suspend_finish(void) { - return subsys_interface_register(&s5pv210_pm_interface); + s3c_pm_check_cleanup(); } -arch_initcall(s5pv210_pm_drvinit); +static const struct platform_suspend_ops s5pv210_suspend_ops = { + .enter = s5pv210_suspend_enter, + .prepare = s5pv210_suspend_prepare, + .finish = s5pv210_suspend_finish, + .valid = suspend_valid_only_mem, +}; + +/* + * Syscore operations used to delay restore of certain registers. + */ static void s5pv210_pm_resume(void) { u32 tmp; @@ -159,9 +170,11 @@ static struct syscore_ops s5pv210_pm_syscore_ops = { .resume = s5pv210_pm_resume, }; -static __init int s5pv210_pm_syscore_init(void) +/* + * Initialization entry point. + */ +void __init s5pv210_pm_init(void) { register_syscore_ops(&s5pv210_pm_syscore_ops); - return 0; + suspend_set_ops(&s5pv210_suspend_ops); } -arch_initcall(s5pv210_pm_syscore_init); diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c new file mode 100644 index 000000000000..53feff33d129 --- /dev/null +++ b/arch/arm/mach-s5pv210/s5pv210.c @@ -0,0 +1,77 @@ +/* + * Samsung's S5PC110/S5PV210 flattened device tree enabled machine. + * + * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd. + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/system_misc.h> + +#include <plat/map-base.h> +#include <mach/regs-clock.h> + +#include "common.h" + +static int __init s5pv210_fdt_map_sys(unsigned long node, const char *uname, + int depth, void *data) +{ + struct map_desc iodesc; + const __be32 *reg; + int len; + + if (!of_flat_dt_is_compatible(node, "samsung,s5pv210-clock")) + return 0; + + reg = of_get_flat_dt_prop(node, "reg", &len); + if (reg == NULL || len != (sizeof(unsigned long) * 2)) + return 0; + + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); + iodesc.length = be32_to_cpu(reg[1]) - 1; + iodesc.virtual = (unsigned long)S3C_VA_SYS; + iodesc.type = MT_DEVICE; + iotable_init(&iodesc, 1); + + return 1; +} + +static void __init s5pv210_dt_map_io(void) +{ + debug_ll_io_init(); + + of_scan_flat_dt(s5pv210_fdt_map_sys, NULL); +} + +static void s5pv210_dt_restart(enum reboot_mode mode, const char *cmd) +{ + __raw_writel(0x1, S5P_SWRESET); +} + +static void __init s5pv210_dt_init_late(void) +{ + platform_device_register_simple("s5pv210-cpufreq", -1, NULL, 0); + s5pv210_pm_init(); +} + +static char const *s5pv210_dt_compat[] __initconst = { + "samsung,s5pc110", + "samsung,s5pv210", + NULL +}; + +DT_MACHINE_START(S5PV210_DT, "Samsung S5PC110/S5PV210-based board") + .dt_compat = s5pv210_dt_compat, + .map_io = s5pv210_dt_map_io, + .restart = s5pv210_dt_restart, + .init_late = s5pv210_dt_init_late, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c deleted file mode 100644 index 55103c8220b3..000000000000 --- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Base s5pv210 setup information for 24bpp LCD framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fb.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <plat/fb.h> -#include <mach/regs-clock.h> -#include <plat/gpio-cfg.h> - -static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr) -{ - s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2)); - - for (; nr > 0; nr--, base++) - s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); -} - - -void s5pv210_fb_gpio_setup_24bpp(void) -{ - s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8); - s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8); - s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8); - s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4); - - /* Set DISPLAY_CONTROL register for Display path selection. - * - * ouput | RGB | I80 | ITU - * ----------------------------------- - * 00 | MIE | FIMD | FIMD - * 01 | MDNIE | MDNIE | FIMD - * 10 | FIMD | FIMD | FIMD - * 11 | FIMD | FIMD | FIMD - */ - writel(0x2, S5P_MDNIE_SEL); -} diff --git a/arch/arm/mach-s5pv210/setup-fimc.c b/arch/arm/mach-s5pv210/setup-fimc.c deleted file mode 100644 index 54cc5b11be0b..000000000000 --- a/arch/arm/mach-s5pv210/setup-fimc.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * S5PV210 camera interface GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> -#include <plat/camport.h> - -int s5pv210_fimc_setup_gpio(enum s5p_camport_id id) -{ - u32 gpio8, gpio5; - int ret; - - switch (id) { - case S5P_CAMPORT_A: - gpio8 = S5PV210_GPE0(0); - gpio5 = S5PV210_GPE1(0); - break; - - case S5P_CAMPORT_B: - gpio8 = S5PV210_GPJ0(0); - gpio5 = S5PV210_GPJ1(0); - break; - - default: - WARN(1, "Wrong camport id: %d\n", id); - return -EINVAL; - } - - ret = s3c_gpio_cfgall_range(gpio8, 8, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_UP); - if (ret) - return ret; - - return s3c_gpio_cfgall_range(gpio5, 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c deleted file mode 100644 index 4a15849766c0..000000000000 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-i2c0.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c deleted file mode 100644 index 4777f6b97a92..000000000000 --- a/arch/arm/mach-s5pv210/setup-i2c1.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-i2c1.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C1 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c1.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c deleted file mode 100644 index bbce6c74b915..000000000000 --- a/arch/arm/mach-s5pv210/setup-i2c2.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-i2c2.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C2 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c2_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c deleted file mode 100644 index ea123d546bd2..000000000000 --- a/arch/arm/mach-s5pv210/setup-ide.c +++ /dev/null @@ -1,39 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-ide.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV210 setup information for IDE - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> - -static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr) -{ - s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4)); - - for (; nr > 0; nr--, base++) - s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); -} - -void s5pv210_ide_setup_gpio(void) -{ - /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */ - s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8); - - /* CF_Data[0 - 7] */ - s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8); - - /* CF_Data[8 - 15] */ - s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8); - - /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ - s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4); -} diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c deleted file mode 100644 index c56420a52f48..000000000000 --- a/arch/arm/mach-s5pv210/setup-keypad.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv210/setup-keypad.c - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) -{ - /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3)); - - /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ - s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c deleted file mode 100644 index 0512ada00522..000000000000 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ /dev/null @@ -1,103 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> - -#include <plat/gpio-cfg.h> -#include <plat/sdhci.h> - -void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG0/GPG1 pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2)); - - switch (width) { - case 8: - /* GPG1[3:6] special-function 3 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); - case 4: - /* GPG0[3:6] special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2)); - } -} - -void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG1[0:1] pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2)); - - /* Data pin GPG1[3:6] to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2)); - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2)); - } -} - -void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG2[0:1] pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2)); - - switch (width) { - case 8: - /* Data pin GPG3[3:6] to special-function 3 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3)); - case 4: - /* Data pin GPG2[3:6] to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2)); - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); - } -} - -void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG3[0:1] pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2)); - - /* Data pin GPG3[3:6] to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2)); - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2)); - } -} diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c deleted file mode 100644 index 81aecc162f82..000000000000 --- a/arch/arm/mach-s5pv210/setup-spi.c +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-spi.c - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -#ifdef CONFIG_S3C64XX_DEV_SPI0 -int s3c64xx_spi0_cfg_gpio(void) -{ - s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5PV210_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -int s3c64xx_spi1_cfg_gpio(void) -{ - s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5PV210_GPB(6), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c deleted file mode 100644 index b2ee5333f89c..000000000000 --- a/arch/arm/mach-s5pv210/setup-usb-phy.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundationr - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/platform_device.h> - -#include <mach/map.h> - -#include <plat/cpu.h> -#include <plat/regs-usb-hsotg-phy.h> -#include <plat/usb-phy.h> - -#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) -#define S5PV210_USB_PHY0_EN (1 << 0) -#define S5PV210_USB_PHY1_EN (1 << 1) - -static int s5pv210_usb_otgphy_init(struct platform_device *pdev) -{ - struct clk *xusbxti; - u32 phyclk; - - writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN, - S5PV210_USB_PHY_CON); - - /* set clock frequency for PLL */ - phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK; - - xusbxti = clk_get(&pdev->dev, "xusbxti"); - if (xusbxti && !IS_ERR(xusbxti)) { - switch (clk_get_rate(xusbxti)) { - case 12 * MHZ: - phyclk |= S3C_PHYCLK_CLKSEL_12M; - break; - case 24 * MHZ: - phyclk |= S3C_PHYCLK_CLKSEL_24M; - break; - default: - case 48 * MHZ: - /* default reference clock */ - break; - } - clk_put(xusbxti); - } - - /* TODO: select external clock/oscillator */ - writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK); - - /* set to normal OTG PHY */ - writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR); - mdelay(1); - - /* reset OTG PHY and Link */ - writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK, - S3C_RSTCON); - udelay(20); /* at-least 10uS */ - writel(0, S3C_RSTCON); - - return 0; -} - -static int s5pv210_usb_otgphy_exit(struct platform_device *pdev) -{ - writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN | - S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR); - - writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN, - S5PV210_USB_PHY_CON); - - return 0; -} - -int s5p_usb_phy_init(struct platform_device *pdev, int type) -{ - if (type == USB_PHY_TYPE_DEVICE) - return s5pv210_usb_otgphy_init(pdev); - - return -EINVAL; -} - -int s5p_usb_phy_exit(struct platform_device *pdev, int type) -{ - if (type == USB_PHY_TYPE_DEVICE) - return s5pv210_usb_otgphy_exit(pdev); - - return -EINVAL; -} diff --git a/arch/arm/plat-samsung/s5p-sleep.S b/arch/arm/mach-s5pv210/sleep.S index 25c68ceb9e2b..7c43ddd33ba8 100644 --- a/arch/arm/plat-samsung/s5p-sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -1,8 +1,8 @@ /* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Common S5P Sleep Code + * S5PV210 Sleep Code * Based on S3C64XX sleep code by: * Ben Dooks, (c) 2008 Simtec Electronics * @@ -10,16 +10,7 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ + */ #include <linux/linkage.h> @@ -40,6 +31,6 @@ * resume code entry for bootloader to call */ -ENTRY(s3c_cpu_resume) +ENTRY(s5pv210_cpu_resume) b cpu_resume -ENDPROC(s3c_cpu_resume) +ENDPROC(s5pv210_cpu_resume) diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index 12d376795abc..2054051eb797 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -10,11 +10,6 @@ #include <asm/sizes.h> /* - * Physical DRAM offset is 0xc0000000 on the SA1100 - */ -#define PLAT_PHYS_OFFSET UL(0xc0000000) - -/* * Because of the wide memory address space between physical RAM banks on the * SA1100, it's much convenient to use Linux's SparseMEM support to implement * our memory map representation. Assuming all memory nodes have equal access diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 798073057e51..e15dff790dbb 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -12,6 +12,7 @@ menuconfig ARCH_SHMOBILE_MULTI select NO_IOPORT_MAP select PINCTRL select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_OPP if ARCH_SHMOBILE_MULTI @@ -25,6 +26,11 @@ config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" select SYS_SUPPORTS_SH_MTU2 +config ARCH_R8A7779 + bool "R-Car H1 (R8A77790)" + select RENESAS_INTC_IRQPIN + select SYS_SUPPORTS_SH_TMU + config ARCH_R8A7790 bool "R-Car H2 (R8A77900)" select RENESAS_IRQC @@ -51,6 +57,11 @@ config MACH_LAGER depends on ARCH_R8A7790 select MICREL_PHY if SH_ETH +config MACH_MARZEN + bool "MARZEN board" + depends on ARCH_R8A7779 + select REGULATOR_FIXED_VOLTAGE if REGULATOR + comment "Renesas ARM SoCs System Configuration" endif @@ -85,7 +96,6 @@ config ARCH_R8A73A4 select CPU_V7 select SH_CLK_CPG select RENESAS_IRQC - select ARCH_HAS_OPP select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -234,19 +244,6 @@ config MACH_MARZEN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF -config MACH_MARZEN_REFERENCE - bool "MARZEN board - Reference Device Tree Implementation" - depends on ARCH_R8A7779 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select USE_OF - ---help--- - Use reference implementation of Marzen board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - config MACH_LAGER bool "Lager board" depends on ARCH_R8A7790 @@ -263,7 +260,6 @@ config MACH_KOELSCH config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 - select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_AK4642 if SND_SIMPLE_CARD diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 38d5fe825e93..fe3878a1a69a 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -34,31 +34,39 @@ obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o endif +# CPU reset vector handling objects +cpu-y := platsmp.o headsmp.o +cpu-$(CONFIG_ARCH_R8A7790) += platsmp-apmu.o +cpu-$(CONFIG_ARCH_R8A7791) += platsmp-apmu.o + # SMP objects -smp-y := platsmp.o headsmp.o +smp-y := $(cpu-y) smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o -smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o -smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o platsmp-apmu.o +smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o +smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o -# IRQ objects -obj-$(CONFIG_ARCH_SH7372) += entry-intc.o - # PM objects obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o pm-rmobile.o obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o pm-rcar.o -obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o +obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o $(cpu-y) +obj-$(CONFIG_ARCH_R8A7791) += pm-r8a7791.o pm-rcar.o $(cpu-y) + +# IRQ objects +obj-$(CONFIG_ARCH_SH7372) += entry-intc.o # Board objects ifdef CONFIG_ARCH_SHMOBILE_MULTI obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o +obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o else obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o @@ -67,7 +75,6 @@ obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_GENMAI) += board-genmai.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o -obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 918fccffa1b6..ebf97d4bcfd8 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -13,7 +13,6 @@ loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 -loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000 __ZRELADDR := $(sort $(loadaddr-y)) zreladdr-y += $(__ZRELADDR) diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c index 3276afcf3cc9..2f7723e5fe91 100644 --- a/arch/arm/mach-shmobile/board-ape6evm-reference.c +++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c @@ -24,11 +24,13 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_device.h> #include <linux/sh_clk.h> -#include <mach/common.h> -#include <mach/r8a73a4.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "common.h" +#include "r8a73a4.h" + static void __init ape6evm_add_standard_devices(void) { diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index fe071a9130b7..1585b8830b13 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -33,12 +33,14 @@ #include <linux/regulator/machine.h> #include <linux/sh_clk.h> #include <linux/smsc911x.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/r8a73a4.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "common.h" +#include "irqs.h" +#include "r8a73a4.h" + /* LEDS */ static struct gpio_led ape6evm_leds[] = { { @@ -248,29 +250,29 @@ static void __init ape6evm_add_standard_devices(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - platform_device_register_resndata(&platform_bus, "smsc911x", -1, + platform_device_register_resndata(NULL, "smsc911x", -1, lan9220_res, ARRAY_SIZE(lan9220_res), &lan9220_data, sizeof(lan9220_data)); regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers, ARRAY_SIZE(vcc_mmc0_consumers), 2800000); - platform_device_register_resndata(&platform_bus, "sh_mmcif", 0, + platform_device_register_resndata(NULL, "sh_mmcif", 0, mmcif0_resources, ARRAY_SIZE(mmcif0_resources), &mmcif0_pdata, sizeof(mmcif0_pdata)); - platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2, + platform_device_register_data(NULL, "reg-fixed-voltage", 2, &vcc_sdhi0_info, sizeof(vcc_sdhi0_info)); - platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0, + platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0, sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_pdata, sizeof(sdhi0_pdata)); regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers, ARRAY_SIZE(vcc_sdhi1_consumers), 3300000); - platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1, + platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1, sdhi1_resources, ARRAY_SIZE(sdhi1_resources), &sdhi1_pdata, sizeof(sdhi1_pdata)); - platform_device_register_data(&platform_bus, "gpio-keys", -1, + platform_device_register_data(NULL, "gpio-keys", -1, &ape6evm_keys_pdata, sizeof(ape6evm_keys_pdata)); - platform_device_register_data(&platform_bus, "leds-gpio", -1, + platform_device_register_data(NULL, "leds-gpio", -1, &ape6evm_leds_pdata, sizeof(ape6evm_leds_pdata)); } diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c index f660fbb96e0b..84bc6cb6d5aa 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -24,11 +24,13 @@ #include <linux/kernel.h> #include <linux/gpio.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/r8a7740.h> + #include <asm/mach/arch.h> #include <asm/hardware/cache-l2x0.h> +#include "common.h" +#include "r8a7740.h" + /* * CON1 Camera Module * CON2 Extension Bus @@ -53,11 +55,11 @@ * CON22 Serial * CON23 LAN * CON24 USB3 - * LED1 Camera LED(Yellow) + * LED1 Camera LED (Yellow) * LED2 Power LED (Green) - * ED3-LED6 User LED(Yellow) - * LED7 LAN link LED(Green) - * LED8 LAN activity LED(Yellow) + * LED3-LED6 User LED (Yellow) + * LED7 LAN link LED (Green) + * LED8 LAN activity LED (Yellow) */ /* diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 30fcac73a540..6dbaad611a92 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -45,9 +45,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/i2c-gpio.h> #include <linux/reboot.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/r8a7740.h> + #include <media/mt9t112.h> #include <media/sh_mobile_ceu.h> #include <media/soc_camera.h> @@ -62,6 +60,10 @@ #include <sound/sh_fsi.h> #include <sound/simple_card.h> +#include "common.h" +#include "irqs.h" +#include "pm-rmobile.h" +#include "r8a7740.h" #include "sh-gpio.h" /* @@ -578,6 +580,40 @@ static struct platform_device hdmi_lcdc_device = { }, }; +/* LEDS */ +static struct gpio_led gpio_leds[] = { + { + .name = "LED3", + .gpio = 102, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "LED4", + .gpio = 111, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "LED5", + .gpio = 110, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name = "LED6", + .gpio = 177, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static struct gpio_led_platform_data leds_gpio_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &leds_gpio_info, + }, +}; + /* GPIO KEY */ #define GPIO_KEY(c, g, d, ...) \ { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } @@ -998,6 +1034,8 @@ static struct platform_device fsi_wm8978_device = { .id = 0, .dev = { .platform_data = &fsi_wm8978_info, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &fsi_wm8978_device.dev.coherent_dma_mask, }, }; @@ -1021,6 +1059,8 @@ static struct platform_device fsi_hdmi_device = { .id = 1, .dev = { .platform_data = &fsi2_hdmi_info, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask, }, }; @@ -1069,6 +1109,7 @@ static struct platform_device *eva_devices[] __initdata = { &lcdc0_device, &pwm_device, &pwm_backlight_device, + &leds_gpio_device, &gpio_keys_device, &sh_eth_device, &vcc_sdhi0, diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c index 027373f8de82..ba840cd333b9 100644 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ b/arch/arm/mach-shmobile/board-bockw-reference.c @@ -19,10 +19,12 @@ */ #include <linux/of_platform.h> -#include <mach/common.h> -#include <mach/r8a7778.h> + #include <asm/mach/arch.h> +#include "common.h" +#include "r8a7778.h" + /* * see board-bock.c for checking detail of dip-switch */ diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index f444be2f241e..8a83eb39d3f1 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -34,14 +34,16 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb/renesas_usbhs.h> + #include <media/soc_camera.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/r8a7778.h> #include <asm/mach/arch.h> #include <sound/rcar_snd.h> #include <sound/simple_card.h> +#include "common.h" +#include "irqs.h" +#include "r8a7778.h" + #define FPGA 0x18200000 #define IRQ0MR 0x30 #define COMCTLR 0x101c @@ -177,7 +179,7 @@ static struct renesas_usbhs_platform_info usbhs_info __initdata = { #define USB1_DEVICE "renesas_usbhs" #define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \ platform_device_register_resndata( \ - &platform_bus, "renesas_usbhs", -1, \ + NULL, "renesas_usbhs", -1, \ usbhsf_resources, \ ARRAY_SIZE(usbhsf_resources), \ &usbhs_info, sizeof(struct renesas_usbhs_platform_info)) @@ -236,7 +238,6 @@ static struct sh_eth_plat_data ether_platform_data __initdata = { }; static struct platform_device_info ether_info __initdata = { - .parent = &platform_bus, .name = "r8a777x-ether", .id = -1, .res = ether_resources, @@ -322,7 +323,6 @@ static struct resource vin##idx##_resources[] __initdata = { \ }; \ \ static struct platform_device_info vin##idx##_info __initdata = { \ - .parent = &platform_bus, \ .name = "r8a7778-vin", \ .id = idx, \ .res = vin##idx##_resources, \ @@ -621,10 +621,10 @@ static void __init bockw_init(void) /* VIN1 has a pin conflict with Ether */ if (!IS_ENABLED(CONFIG_SH_ETH)) platform_device_register_full(&vin1_info); - platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0, + platform_device_register_data(NULL, "soc-camera-pdrv", 0, &iclink0_ml86v7667, sizeof(iclink0_ml86v7667)); - platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1, + platform_device_register_data(NULL, "soc-camera-pdrv", 1, &iclink1_ml86v7667, sizeof(iclink1_ml86v7667)); @@ -637,12 +637,12 @@ static void __init bockw_init(void) r8a7778_pinmux_init(); platform_device_register_resndata( - &platform_bus, "sh_mmcif", -1, + NULL, "sh_mmcif", -1, mmc_resources, ARRAY_SIZE(mmc_resources), &sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data)); platform_device_register_resndata( - &platform_bus, "rcar_usb_phy", -1, + NULL, "rcar_usb_phy", -1, usb_phy_resources, ARRAY_SIZE(usb_phy_resources), &usb_phy_platform_data, @@ -668,7 +668,7 @@ static void __init bockw_init(void) iowrite16(val, fpga + IRQ0MR); platform_device_register_resndata( - &platform_bus, "smsc911x", -1, + NULL, "smsc911x", -1, smsc911x_resources, ARRAY_SIZE(smsc911x_resources), &smsc911x_data, sizeof(smsc911x_data)); } @@ -685,7 +685,7 @@ static void __init bockw_init(void) iounmap(base); platform_device_register_resndata( - &platform_bus, "sh_mobile_sdhi", 0, + NULL, "sh_mobile_sdhi", 0, sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); } @@ -700,7 +700,7 @@ static void __init bockw_init(void) "ak4554-adc-dac", 1, NULL, 0); pdev = platform_device_register_resndata( - &platform_bus, "rcar_sound", -1, + NULL, "rcar_sound", -1, rsnd_resources, ARRAY_SIZE(rsnd_resources), &rsnd_info, sizeof(rsnd_info)); @@ -710,7 +710,6 @@ static void __init bockw_init(void) for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) { struct platform_device_info cardinfo = { - .parent = &platform_bus, .name = "asoc-simple-card", .id = i, .data = &rsnd_card_info[i], diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c index 2ff6ad6e608e..e5448f7b868a 100644 --- a/arch/arm/mach-shmobile/board-genmai-reference.c +++ b/arch/arm/mach-shmobile/board-genmai-reference.c @@ -20,12 +20,14 @@ #include <linux/kernel.h> #include <linux/of_platform.h> -#include <mach/clock.h> -#include <mach/common.h> -#include <mach/r7s72100.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "clock.h" +#include "common.h" +#include "r7s72100.h" + /* * This is a really crude hack to provide clkdev support to platform * devices until they get moved to DT. @@ -47,7 +49,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(GENMAI_DT, "genmai") - .init_early = r7s72100_init_early, + .init_early = shmobile_init_delay, .init_machine = genmai_add_standard_devices, .dt_compat = genmai_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c index c94201ee8596..7bf2d8057535 100644 --- a/arch/arm/mach-shmobile/board-genmai.c +++ b/arch/arm/mach-shmobile/board-genmai.c @@ -25,12 +25,14 @@ #include <linux/sh_eth.h> #include <linux/spi/rspi.h> #include <linux/spi/spi.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/r7s72100.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "common.h" +#include "irqs.h" +#include "r7s72100.h" + /* Ether */ static const struct sh_eth_plat_data ether_pdata __initconst = { .phy = 0x00, /* PD60610 */ @@ -46,7 +48,6 @@ static const struct resource ether_resources[] __initconst = { }; static const struct platform_device_info ether_info __initconst = { - .parent = &platform_bus, .name = "r7s72100-ether", .id = -1, .res = ether_resources, @@ -76,7 +77,7 @@ static const struct rspi_plat_data rspi_pdata __initconst = { }; #define r7s72100_register_rspi(idx) \ - platform_device_register_resndata(&platform_bus, "rspi-rz", idx, \ + platform_device_register_resndata(NULL, "rspi-rz", idx, \ rspi##idx##_resources, \ ARRAY_SIZE(rspi##idx##_resources), \ &rspi_pdata, sizeof(rspi_pdata)) @@ -118,7 +119,7 @@ R7S72100_SCIF(6, 0xe800a000, gic_iid(245)); R7S72100_SCIF(7, 0xe800a800, gic_iid(249)); #define r7s72100_register_scif(index) \ - platform_device_register_resndata(&platform_bus, "sh-sci", index, \ + platform_device_register_resndata(NULL, "sh-sci", index, \ scif##index##_resources, \ ARRAY_SIZE(scif##index##_resources), \ &scif##index##_platform_data, \ @@ -154,7 +155,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(GENMAI_DT, "genmai") - .init_early = r7s72100_init_early, + .init_early = shmobile_init_delay, .init_machine = genmai_add_standard_devices, .dt_compat = genmai_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index d322a162b4b0..3ff88c138896 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -23,13 +23,15 @@ #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/platform_data/rcar-du.h> -#include <mach/clock.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/rcar-gen2.h> -#include <mach/r8a7791.h> + #include <asm/mach/arch.h> +#include "clock.h" +#include "common.h" +#include "irqs.h" +#include "r8a7791.h" +#include "rcar-gen2.h" + /* DU */ static struct rcar_du_encoder_data koelsch_du_encoders[] = { { @@ -92,24 +94,9 @@ static const struct clk_name clk_names[] __initconst = { { "lvds0", "lvds.0", "rcar-du-r8a7791" }, }; -/* - * This is a really crude hack to work around core platform clock issues - */ -static const struct clk_name clk_enables[] __initconst = { - { "ether", NULL, "ee700000.ethernet" }, - { "i2c2", NULL, "e6530000.i2c" }, - { "msiof0", NULL, "e6e20000.spi" }, - { "qspi_mod", NULL, "e6b10000.spi" }, - { "sdhi0", NULL, "ee100000.sd" }, - { "sdhi1", NULL, "ee140000.sd" }, - { "sdhi2", NULL, "ee160000.sd" }, - { "thermal", NULL, "e61f0000.thermal" }, -}; - static void __init koelsch_add_standard_devices(void) { shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); - shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true); r8a7791_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -128,5 +115,6 @@ DT_MACHINE_START(KOELSCH_DT, "koelsch") .init_time = rcar_gen2_timer_init, .init_machine = koelsch_add_standard_devices, .init_late = shmobile_init_late, + .reserve = rcar_gen2_reserve, .dt_compat = koelsch_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index c6c68892caa3..b7d5bc7659cd 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -45,13 +45,15 @@ #include <linux/spi/flash.h> #include <linux/spi/rspi.h> #include <linux/spi/spi.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/r8a7791.h> -#include <mach/rcar-gen2.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "common.h" +#include "irqs.h" +#include "r8a7791.h" +#include "rcar-gen2.h" + /* DU */ static struct rcar_du_encoder_data koelsch_du_encoders[] = { { @@ -118,7 +120,6 @@ static const struct resource ether_resources[] __initconst = { }; static const struct platform_device_info ether_info __initconst = { - .parent = &platform_bus, .name = "r8a7791-ether", .id = -1, .res = ether_resources, @@ -230,7 +231,6 @@ static const struct resource sata0_resources[] __initconst = { }; static const struct platform_device_info sata0_info __initconst = { - .parent = &platform_bus, .name = "sata-r8a7791", .id = 0, .res = sata0_resources, @@ -439,13 +439,13 @@ static void __init koelsch_add_standard_devices(void) r8a7791_pinmux_init(); r8a7791_add_standard_devices(); platform_device_register_full(ðer_info); - platform_device_register_data(&platform_bus, "leds-gpio", -1, + platform_device_register_data(NULL, "leds-gpio", -1, &koelsch_leds_pdata, sizeof(koelsch_leds_pdata)); - platform_device_register_data(&platform_bus, "gpio-keys", -1, + platform_device_register_data(NULL, "gpio-keys", -1, &koelsch_keys_pdata, sizeof(koelsch_keys_pdata)); - platform_device_register_resndata(&platform_bus, "qspi", 0, + platform_device_register_resndata(NULL, "qspi", 0, qspi_resources, ARRAY_SIZE(qspi_resources), &qspi_pdata, sizeof(qspi_pdata)); @@ -460,28 +460,28 @@ static void __init koelsch_add_standard_devices(void) koelsch_add_i2c(4); koelsch_add_i2c(5); - platform_device_register_data(&platform_bus, "reg-fixed-voltage", 0, + platform_device_register_data(NULL, "reg-fixed-voltage", 0, &vcc_sdhi0_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(&platform_bus, "reg-fixed-voltage", 1, + platform_device_register_data(NULL, "reg-fixed-voltage", 1, &vcc_sdhi1_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2, + platform_device_register_data(NULL, "reg-fixed-voltage", 2, &vcc_sdhi2_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(&platform_bus, "gpio-regulator", 0, + platform_device_register_data(NULL, "gpio-regulator", 0, &vccq_sdhi0_info, sizeof(struct gpio_regulator_config)); - platform_device_register_data(&platform_bus, "gpio-regulator", 1, + platform_device_register_data(NULL, "gpio-regulator", 1, &vccq_sdhi1_info, sizeof(struct gpio_regulator_config)); - platform_device_register_data(&platform_bus, "gpio-regulator", 2, + platform_device_register_data(NULL, "gpio-regulator", 2, &vccq_sdhi2_info, sizeof(struct gpio_regulator_config)); - platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0, + platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0, sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); - platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1, + platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1, sdhi1_resources, ARRAY_SIZE(sdhi1_resources), &sdhi1_info, sizeof(struct sh_mobile_sdhi_info)); - platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2, + platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2, sdhi2_resources, ARRAY_SIZE(sdhi2_resources), &sdhi2_info, sizeof(struct sh_mobile_sdhi_info)); @@ -526,5 +526,6 @@ DT_MACHINE_START(KOELSCH_DT, "koelsch") .init_time = rcar_gen2_timer_init, .init_machine = koelsch_init, .init_late = shmobile_init_late, + .reserve = rcar_gen2_reserve, .dt_compat = koelsch_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c index a735a1d80c28..5d2621f202d1 100644 --- a/arch/arm/mach-shmobile/board-kzm9g-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -25,12 +25,14 @@ #include <linux/irq.h> #include <linux/input.h> #include <linux/of_platform.h> -#include <mach/sh73a0.h> -#include <mach/common.h> + #include <asm/hardware/cache-l2x0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "common.h" +#include "sh73a0.h" + static void __init kzm_init(void) { sh73a0_add_standard_devices_dt(); diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index f94ec8ca42c1..f8bc7f8f86ad 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -41,16 +41,18 @@ #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/videodev2.h> + #include <sound/sh_fsi.h> #include <sound/simple_card.h> -#include <mach/irqs.h> -#include <mach/sh73a0.h> -#include <mach/common.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <video/sh_mobile_lcdc.h> +#include "common.h" +#include "irqs.h" +#include "sh73a0.h" + /* * external GPIO */ @@ -603,6 +605,8 @@ static struct platform_device fsi_ak4648_device = { .name = "asoc-simple-card", .dev = { .platform_data = &fsi2_ak4648_info, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &fsi_ak4648_device.dev.coherent_dma_mask, }, }; diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index 749832e3f33c..41c808e56005 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -22,13 +22,15 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <linux/platform_data/rcar-du.h> -#include <mach/clock.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/rcar-gen2.h> -#include <mach/r8a7790.h> + #include <asm/mach/arch.h> +#include "clock.h" +#include "common.h" +#include "irqs.h" +#include "r8a7790.h" +#include "rcar-gen2.h" + /* DU */ static struct rcar_du_encoder_data lager_du_encoders[] = { { @@ -98,23 +100,9 @@ static const struct clk_name clk_names[] __initconst = { { "lvds1", "lvds.1", "rcar-du-r8a7790" }, }; -/* - * This is a really crude hack to work around core platform clock issues - */ -static const struct clk_name clk_enables[] __initconst = { - { "ether", NULL, "ee700000.ethernet" }, - { "msiof1", NULL, "e6e10000.spi" }, - { "mmcif1", NULL, "ee220000.mmc" }, - { "qspi_mod", NULL, "e6b10000.spi" }, - { "sdhi0", NULL, "ee100000.sd" }, - { "sdhi2", NULL, "ee140000.sd" }, - { "thermal", NULL, "e61f0000.thermal" }, -}; - static void __init lager_add_standard_devices(void) { shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); - shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true); r8a7790_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -129,9 +117,10 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .smp = smp_ops(r8a7790_smp_ops), - .init_early = r8a7790_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = lager_add_standard_devices, .init_late = shmobile_init_late, + .reserve = rcar_gen2_reserve, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index f8b1e05463cc..e1d8215da0b0 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -31,6 +31,8 @@ #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> #include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/mtd.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/camera-rcar.h> #include <linux/platform_data/gpio-rcar.h> @@ -43,22 +45,23 @@ #include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/sh_eth.h> +#include <linux/spi/flash.h> +#include <linux/spi/rspi.h> +#include <linux/spi/spi.h> #include <linux/usb/phy.h> #include <linux/usb/renesas_usbhs.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/r8a7790.h> + #include <media/soc_camera.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/mtd.h> -#include <linux/spi/flash.h> -#include <linux/spi/rspi.h> -#include <linux/spi/spi.h> #include <sound/rcar_snd.h> #include <sound/simple_card.h> +#include "common.h" +#include "irqs.h" +#include "r8a7790.h" +#include "rcar-gen2.h" + /* * SSI-AK4643 * @@ -277,7 +280,6 @@ static const struct resource ether_resources[] __initconst = { }; static const struct platform_device_info ether_info __initconst = { - .parent = &platform_bus, .name = "r8a7790-ether", .id = -1, .res = ether_resources, @@ -354,7 +356,6 @@ static void __init lager_add_vin_device(unsigned idx, struct rcar_vin_platform_data *pdata) { struct platform_device_info vin_info = { - .parent = &platform_bus, .name = "r8a7790-vin", .id = idx, .res = &vin_resources[idx * 2], @@ -391,7 +392,7 @@ LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656); static void __init lager_add_camera1_device(void) { - platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1, + platform_device_register_data(NULL, "soc-camera-pdrv", 1, &cam1_link, sizeof(cam1_link)); lager_add_vin_device(1, &vin1_pdata); } @@ -403,7 +404,6 @@ static const struct resource sata1_resources[] __initconst = { }; static const struct platform_device_info sata1_info __initconst = { - .parent = &platform_bus, .name = "sata-r8a7790", .id = 1, .res = sata1_resources, @@ -533,7 +533,7 @@ static struct usbhs_private usbhs_priv __initdata = { static void __init lager_register_usbhs(void) { usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2"); - platform_device_register_resndata(&platform_bus, + platform_device_register_resndata(NULL, "renesas_usbhs", -1, usbhs_resources, ARRAY_SIZE(usbhs_resources), @@ -608,7 +608,6 @@ static struct asoc_simple_card_info rsnd_card_info = { static void __init lager_add_rsnd_device(void) { struct platform_device_info cardinfo = { - .parent = &platform_bus, .name = "asoc-simple-card", .id = -1, .data = &rsnd_card_info, @@ -620,7 +619,7 @@ static void __init lager_add_rsnd_device(void) ARRAY_SIZE(i2c2_devices)); platform_device_register_resndata( - &platform_bus, "rcar_sound", -1, + NULL, "rcar_sound", -1, rsnd_resources, ARRAY_SIZE(rsnd_resources), &rsnd_info, sizeof(rsnd_info)); @@ -663,7 +662,6 @@ static const struct resource pci1_resources[] __initconst = { }; static const struct platform_device_info pci1_info __initconst = { - .parent = &platform_bus, .name = "pci-rcar-gen2", .id = 1, .res = pci1_resources, @@ -684,7 +682,6 @@ static const struct resource pci2_resources[] __initconst = { }; static const struct platform_device_info pci2_info __initconst = { - .parent = &platform_bus, .name = "pci-rcar-gen2", .id = 2, .res = pci2_resources, @@ -795,16 +792,16 @@ static void __init lager_add_standard_devices(void) r8a7790_pinmux_init(); r8a7790_add_standard_devices(); - platform_device_register_data(&platform_bus, "leds-gpio", -1, + platform_device_register_data(NULL, "leds-gpio", -1, &lager_leds_pdata, sizeof(lager_leds_pdata)); - platform_device_register_data(&platform_bus, "gpio-keys", -1, + platform_device_register_data(NULL, "gpio-keys", -1, &lager_keys_pdata, sizeof(lager_keys_pdata)); regulator_register_always_on(fixed_regulator_idx++, "fixed-3.3V", fixed3v3_power_consumers, ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - platform_device_register_resndata(&platform_bus, "sh_mmcif", 1, + platform_device_register_resndata(NULL, "sh_mmcif", 1, mmcif1_resources, ARRAY_SIZE(mmcif1_resources), &mmcif1_pdata, sizeof(mmcif1_pdata)); @@ -812,27 +809,27 @@ static void __init lager_add_standard_devices(void) lager_add_du_device(); - platform_device_register_resndata(&platform_bus, "qspi", 0, + platform_device_register_resndata(NULL, "qspi", 0, qspi_resources, ARRAY_SIZE(qspi_resources), &qspi_pdata, sizeof(qspi_pdata)); spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); - platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++, + platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++, &vcc_sdhi0_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++, + platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++, &vcc_sdhi2_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++, + platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++, &vccq_sdhi0_info, sizeof(struct gpio_regulator_config)); - platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++, + platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++, &vccq_sdhi2_info, sizeof(struct gpio_regulator_config)); lager_add_camera1_device(); platform_device_register_full(&sata1_info); - platform_device_register_resndata(&platform_bus, "usb_phy_rcar_gen2", + platform_device_register_resndata(NULL, "usb_phy_rcar_gen2", -1, usbhs_phy_resources, ARRAY_SIZE(usbhs_phy_resources), &usbhs_phy_pdata, @@ -843,10 +840,10 @@ static void __init lager_add_standard_devices(void) lager_add_rsnd_device(); - platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0, + platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0, sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); - platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2, + platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2, sdhi2_resources, ARRAY_SIZE(sdhi2_resources), &sdhi2_info, sizeof(struct sh_mobile_sdhi_info)); } @@ -886,9 +883,10 @@ static const char * const lager_boards_compat_dt[] __initconst = { DT_MACHINE_START(LAGER_DT, "lager") .smp = smp_ops(r8a7790_smp_ops), - .init_early = r8a7790_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = lager_init, .init_late = shmobile_init_late, + .reserve = rcar_gen2_reserve, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 0ff4d8e45cf7..79f448e93abb 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -47,10 +47,11 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> -#include <linux/sh_intc.h> +#include <linux/sh_clk.h> #include <linux/tca6416_keypad.h> #include <linux/usb/renesas_usbhs.h> #include <linux/dma-mapping.h> + #include <video/sh_mobile_hdmi.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> @@ -58,15 +59,14 @@ #include <media/soc_camera_platform.h> #include <sound/sh_fsi.h> #include <sound/simple_card.h> - -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/sh7372.h> - #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include "common.h" +#include "irqs.h" +#include "pm-rmobile.h" #include "sh-gpio.h" +#include "sh7372.h" /* * Address Interface BusWidth note @@ -523,6 +523,8 @@ static struct platform_device fsi_hdmi_device = { .id = 1, .dev = { .platform_data = &fsi2_hdmi_info, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask, }, }; @@ -919,6 +921,8 @@ static struct platform_device fsi_ak4643_device = { .name = "asoc-simple-card", .dev = { .platform_data = &fsi2_ak4643_info, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &fsi_ak4643_device.dev.coherent_dma_mask, }, }; diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c index 2773936bf7dc..21b3e1ca2261 100644 --- a/arch/arm/mach-shmobile/board-marzen-reference.c +++ b/arch/arm/mach-shmobile/board-marzen-reference.c @@ -19,19 +19,42 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <mach/r8a7779.h> -#include <mach/common.h> -#include <mach/irqs.h> +#include <linux/clk/shmobile.h> +#include <linux/clocksource.h> +#include <linux/of_platform.h> + #include <asm/irq.h> #include <asm/mach/arch.h> +#include "clock.h" +#include "common.h" +#include "irqs.h" +#include "r8a7779.h" + +static void __init marzen_init_timer(void) +{ + r8a7779_clocks_init(r8a7779_read_mode_pins()); + clocksource_of_init(); +} + +/* + * This is a really crude hack to provide clkdev support to platform + * devices until they get moved to DT. + */ +static const struct clk_name clk_names[] __initconst = { + { "tmu0", "fck", "sh-tmu.0" }, +}; + static void __init marzen_init(void) { + shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); r8a7779_add_standard_devices_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */ } static const char *marzen_boards_compat_dt[] __initdata = { + "renesas,marzen", "renesas,marzen-reference", NULL, }; @@ -39,7 +62,8 @@ static const char *marzen_boards_compat_dt[] __initdata = { DT_MACHINE_START(MARZEN, "marzen") .smp = smp_ops(r8a7779_smp_ops), .map_io = r8a7779_map_io, - .init_early = r8a7779_init_delay, + .init_early = shmobile_init_delay, + .init_time = marzen_init_timer, .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq_dt, .init_machine = marzen_init, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index d832a4477b4b..e5cf4201e769 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -41,14 +41,16 @@ #include <linux/mmc/host.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> + #include <media/soc_camera.h> -#include <mach/r8a7779.h> -#include <mach/common.h> -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/traps.h> +#include "common.h" +#include "irqs.h" +#include "r8a7779.h" + /* Fixed 3.3V regulator to be used by SDHI0 */ static struct regulator_consumer_supply fixed3v3_power_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), @@ -272,7 +274,6 @@ static struct resource vin##idx##_resources[] __initdata = { \ }; \ \ static struct platform_device_info vin##idx##_info __initdata = { \ - .parent = &platform_bus, \ .name = "r8a7779-vin", \ .id = idx, \ .res = vin##idx##_resources, \ diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c index df187484de5d..3eb2ec401e0c 100644 --- a/arch/arm/mach-shmobile/clock-r7s72100.c +++ b/arch/arm/mach-shmobile/clock-r7s72100.c @@ -19,8 +19,9 @@ #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> -#include <mach/common.h> -#include <mach/r7s72100.h> + +#include "common.h" +#include "r7s72100.h" /* Frequency Control Registers */ #define FRQCR 0xfcfe0010 diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 9629851a9b5d..c2330ea1802c 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -22,8 +22,8 @@ #include <linux/kernel.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> -#include <mach/clock.h> -#include <mach/common.h> +#include "common.h" +#include "clock.h" #define CPG_BASE 0xe6150000 #define CPG_LEN 0x270 diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 2ffb56016e0f..0794f0426e70 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -22,9 +22,10 @@ #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> -#include <mach/clock.h> -#include <mach/common.h> -#include <mach/r8a7740.h> + +#include "clock.h" +#include "common.h" +#include "r8a7740.h" /* * | MDx | XTAL1/EXTAL1 | System | EXTALR | diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index 9407bac6fa61..67980a08a601 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -39,8 +39,8 @@ #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> -#include <mach/clock.h> -#include <mach/common.h> +#include "clock.h" +#include "common.h" #define MSTPCR0 IOMEM(0xffc80030) #define MSTPCR1 IOMEM(0xffc80034) diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index a13298bd37a8..c51f9db3f66f 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -23,8 +23,11 @@ #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> -#include <mach/clock.h> -#include <mach/common.h> +#include <linux/sh_timer.h> + +#include "clock.h" +#include "common.h" +#include "r8a7779.h" /* * MD1 = 1 MD1 = 0 @@ -52,9 +55,6 @@ #define MSTPCR3 IOMEM(0xffc8003c) #define MSTPSR1 IOMEM(0xffc80044) -#define MODEMR 0xffcc0020 - - /* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. */ @@ -207,14 +207,9 @@ static struct clk_lookup lookups[] = { void __init r8a7779_clock_init(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; + u32 mode = r8a7779_read_mode_pins(); int k, ret = 0; - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - if (mode & MD(1)) { plla_clk.rate = 1500000000; @@ -268,3 +263,13 @@ void __init r8a7779_clock_init(void) else panic("failed to setup r8a7779 clocks\n"); } + +/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ +void __init __weak r8a7779_register_twd(void) { } + +void __init r8a7779_earlytimer_init(void) +{ + r8a7779_clock_init(); + r8a7779_register_twd(); + shmobile_earlytimer_init(); +} diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 296a057109e4..17435c1aa2fe 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -22,9 +22,11 @@ #include <linux/kernel.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> -#include <mach/clock.h> -#include <mach/common.h> -#include <mach/r8a7790.h> + +#include "clock.h" +#include "common.h" +#include "r8a7790.h" +#include "rcar-gen2.h" /* * MD EXTAL PLL0 PLL1 PLL3 diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index e2fdfcc14436..10e193d707f5 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -23,9 +23,9 @@ #include <linux/kernel.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> -#include <mach/clock.h> -#include <mach/common.h> -#include <mach/rcar-gen2.h> +#include "clock.h" +#include "common.h" +#include "rcar-gen2.h" /* * MD EXTAL PLL0 PLL1 PLL3 diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index d16d9ca7f79e..7071676145c4 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -21,8 +21,8 @@ #include <linux/io.h> #include <linux/sh_clk.h> #include <linux/clkdev.h> -#include <mach/clock.h> -#include <mach/common.h> +#include "clock.h" +#include "common.h" /* SH7372 registers */ #define FRQCRA IOMEM(0xe6150000) diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 0d77f652f30c..d8c4048b9e33 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -22,8 +22,8 @@ #include <linux/sh_clk.h> #include <linux/clkdev.h> #include <asm/processor.h> -#include <mach/clock.h> -#include <mach/common.h> +#include "clock.h" +#include "common.h" #define FRQCRA IOMEM(0xe6150000) #define FRQCRB IOMEM(0xe6150004) diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index e7232a0373b9..806f94038cc4 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -25,7 +25,7 @@ #ifdef CONFIG_COMMON_CLK #include <linux/clk.h> #include <linux/clkdev.h> -#include <mach/clock.h> +#include "clock.h" void __init shmobile_clk_workaround(const struct clk_name *clks, int nr_clks, bool enable) @@ -49,8 +49,8 @@ void __init shmobile_clk_workaround(const struct clk_name *clks, #else /* CONFIG_COMMON_CLK */ #include <linux/sh_clk.h> #include <linux/export.h> -#include <mach/clock.h> -#include <mach/common.h> +#include "clock.h" +#include "common.h" unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk) { diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/clock.h index 31b6417463e6..31b6417463e6 100644 --- a/arch/arm/mach-shmobile/include/mach/clock.h +++ b/arch/arm/mach-shmobile/clock.h diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/common.h index f7a360edcc35..98056081f0da 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -35,8 +35,10 @@ extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); #ifdef CONFIG_SUSPEND int shmobile_suspend_init(void); +void shmobile_smp_apmu_suspend_init(void); #else static inline int shmobile_suspend_init(void) { return 0; } +static inline void shmobile_smp_apmu_suspend_init(void) { } #endif #ifdef CONFIG_CPU_IDLE @@ -45,12 +47,19 @@ int shmobile_cpuidle_init(void); static inline int shmobile_cpuidle_init(void) { return 0; } #endif +#ifdef CONFIG_CPU_FREQ +int shmobile_cpufreq_init(void); +#else +static inline int shmobile_cpufreq_init(void) { return 0; } +#endif + extern void __iomem *shmobile_scu_base; static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); shmobile_cpuidle_init(); + shmobile_cpufreq_init(); } #endif /* __ARCH_MACH_COMMON_H */ diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c index 9411a5bf4fd6..f2e79f2376e1 100644 --- a/arch/arm/mach-shmobile/console.c +++ b/arch/arm/mach-shmobile/console.c @@ -19,8 +19,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <mach/common.h> #include <asm/mach/map.h> +#include "common.h" void __init shmobile_setup_console(void) { diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c new file mode 100644 index 000000000000..8a24b2be46ae --- /dev/null +++ b/arch/arm/mach-shmobile/cpufreq.c @@ -0,0 +1,17 @@ +/* + * CPUFreq support code for SH-Mobile ARM + * + * Copyright (C) 2014 Gaku Inami + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/platform_device.h> + +int __init shmobile_cpufreq_init(void) +{ + platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0); + return 0; +} diff --git a/arch/arm/mach-shmobile/include/mach/dma-register.h b/arch/arm/mach-shmobile/dma-register.h index 97c40bd9b94f..97c40bd9b94f 100644 --- a/arch/arm/mach-shmobile/include/mach/dma-register.h +++ b/arch/arm/mach-shmobile/dma-register.h diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index e5be5c88644b..50c491567e11 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -10,14 +10,18 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/linkage.h> #include <linux/init.h> +#include <linux/linkage.h> +#include <linux/threads.h> +#include <asm/assembler.h> #include <asm/memory.h> +#ifdef CONFIG_SMP ENTRY(shmobile_invalidate_start) bl v7_invalidate_l1 b secondary_startup ENDPROC(shmobile_invalidate_start) +#endif /* * Reset vector for secondary CPUs. @@ -68,14 +72,14 @@ shmobile_smp_boot_find_mpidr: shmobile_smp_boot_next: add r1, r1, #1 - cmp r1, #CONFIG_NR_CPUS + cmp r1, #NR_CPUS blo shmobile_smp_boot_find_mpidr b shmobile_smp_sleep shmobile_smp_boot_found: ldr r0, [r7, r1, lsl #2] - mov pc, r9 + ret r9 ENDPROC(shmobile_smp_boot) ENTRY(shmobile_smp_sleep) @@ -85,10 +89,10 @@ ENDPROC(shmobile_smp_sleep) .globl shmobile_smp_mpidr shmobile_smp_mpidr: -1: .space CONFIG_NR_CPUS * 4 +1: .space NR_CPUS * 4 .globl shmobile_smp_fn shmobile_smp_fn: -2: .space CONFIG_NR_CPUS * 4 +2: .space NR_CPUS * 4 .globl shmobile_smp_arg shmobile_smp_arg: -3: .space CONFIG_NR_CPUS * 4 +3: .space NR_CPUS * 4 diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index d241bfd6926d..5aee83f079e2 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -1,24 +1,10 @@ #ifndef __ASM_MACH_IRQS_H #define __ASM_MACH_IRQS_H -#include <linux/sh_intc.h> - -/* GIC */ -#define gic_spi(nr) ((nr) + 32) -#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */ - -/* INTCS */ -#define INTCS_VECT_BASE 0x3400 -#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) -#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) +/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */ /* External IRQ pins */ #define IRQPIN_BASE 2000 #define irq_pin(nr) ((nr) + IRQPIN_BASE) -/* GPIO IRQ */ -#define _GPIO_IRQ_BASE 2500 -#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x)) -#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y) - #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index a91caad7db7c..e2af00b1bd9d 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -22,11 +22,10 @@ #include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/sh_intc.h> -#include <mach/intc.h> -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "intc.h" +#include "irqs.h" enum { UNUSED_INTCA = 0, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 19a26f4579b3..44457a94897b 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -22,15 +22,16 @@ #include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/sh_intc.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> -#include <mach/intc.h> -#include <mach/irqs.h> -#include <mach/sh73a0.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include "intc.h" +#include "irqs.h" +#include "sh73a0.h" + enum { UNUSED = 0, diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/intc.h index a5603c76cfe0..a5603c76cfe0 100644 --- a/arch/arm/mach-shmobile/include/mach/intc.h +++ b/arch/arm/mach-shmobile/intc.h diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h new file mode 100644 index 000000000000..4ff2d2aa94f0 --- /dev/null +++ b/arch/arm/mach-shmobile/irqs.h @@ -0,0 +1,21 @@ +#ifndef __SHMOBILE_IRQS_H +#define __SHMOBILE_IRQS_H + +#include <linux/sh_intc.h> +#include <mach/irqs.h> + +/* GIC */ +#define gic_spi(nr) ((nr) + 32) +#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */ + +/* INTCS */ +#define INTCS_VECT_BASE 0x3400 +#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) +#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) + +/* GPIO IRQ */ +#define _GPIO_IRQ_BASE 2500 +#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x)) +#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y) + +#endif /* __SHMOBILE_IRQS_H */ diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 8cb641c00fdb..2c06810d3a70 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -7,27 +7,32 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/cpu_pm.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> #include <linux/ioport.h> #include <linux/of_address.h> #include <linux/smp.h> +#include <linux/suspend.h> +#include <linux/threads.h> #include <asm/cacheflush.h> #include <asm/cp15.h> +#include <asm/proc-fns.h> #include <asm/smp_plat.h> -#include <mach/common.h> +#include <asm/suspend.h> +#include "common.h" static struct { void __iomem *iomem; int bit; -} apmu_cpus[CONFIG_NR_CPUS]; +} apmu_cpus[NR_CPUS]; #define WUPCR_OFFS 0x10 #define PSTR_OFFS 0x40 #define CPUNCR_OFFS(n) (0x100 + (0x10 * (n))) -static int apmu_power_on(void __iomem *p, int bit) +static int __maybe_unused apmu_power_on(void __iomem *p, int bit) { /* request power on */ writel_relaxed(BIT(bit), p + WUPCR_OFFS); @@ -46,7 +51,7 @@ static int apmu_power_off(void __iomem *p, int bit) return 0; } -static int apmu_power_off_poll(void __iomem *p, int bit) +static int __maybe_unused apmu_power_off_poll(void __iomem *p, int bit) { int k; @@ -69,7 +74,7 @@ static int apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu)) static void apmu_init_cpu(struct resource *res, int cpu, int bit) { - if (apmu_cpus[cpu].iomem) + if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem) return; apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res)); @@ -133,6 +138,7 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus) apmu_parse_cfg(apmu_init_cpu); } +#ifdef CONFIG_SMP int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) { /* For this particular CPU register boot vector */ @@ -140,8 +146,9 @@ int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) return apmu_wrap(cpu, apmu_power_on); } +#endif -#ifdef CONFIG_HOTPLUG_CPU +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND) /* nicked from arch/arm/mach-exynos/hotplug.c */ static inline void cpu_enter_lowpower_a15(void) { @@ -172,16 +179,40 @@ static inline void cpu_enter_lowpower_a15(void) dsb(); } -void shmobile_smp_apmu_cpu_die(unsigned int cpu) +void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) { - /* For this particular CPU deregister boot vector */ - shmobile_smp_hook(cpu, 0, 0); /* Select next sleep mode using the APMU */ apmu_wrap(cpu, apmu_power_off); /* Do ARM specific CPU shutdown */ cpu_enter_lowpower_a15(); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} +#endif + +#if defined(CONFIG_HOTPLUG_CPU) +void shmobile_smp_apmu_cpu_die(unsigned int cpu) +{ + /* For this particular CPU deregister boot vector */ + shmobile_smp_hook(cpu, 0, 0); + + /* Shutdown CPU core */ + shmobile_smp_apmu_cpu_shutdown(cpu); /* jump to shared mach-shmobile sleep / reset code */ shmobile_smp_sleep(); @@ -192,3 +223,25 @@ int shmobile_smp_apmu_cpu_kill(unsigned int cpu) return apmu_wrap(cpu, apmu_power_off_poll); } #endif + +#if defined(CONFIG_SUSPEND) +static int shmobile_smp_apmu_do_suspend(unsigned long cpu) +{ + shmobile_smp_hook(cpu, virt_to_phys(cpu_resume), 0); + shmobile_smp_apmu_cpu_shutdown(cpu); + cpu_do_idle(); /* WFI selects Core Standby */ + return 1; +} + +static int shmobile_smp_apmu_enter_suspend(suspend_state_t state) +{ + cpu_suspend(smp_processor_id(), shmobile_smp_apmu_do_suspend); + cpu_leave_lowpower(); + return 0; +} + +void __init shmobile_smp_apmu_suspend_init(void) +{ + shmobile_suspend_ops.enter = shmobile_smp_apmu_enter_suspend; +} +#endif diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index 673ad6e80869..64663110ab6c 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -15,7 +15,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#include <mach/common.h> +#include "common.h" static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, unsigned long action, void *hcpu) diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 9ebc246b8d7d..3923e09e966d 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <mach/common.h> +#include "common.h" extern unsigned long shmobile_smp_fn[]; extern unsigned long shmobile_smp_arg[]; diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c index 40b87aa1d448..a0d44d537fa0 100644 --- a/arch/arm/mach-shmobile/pm-r8a7740.c +++ b/arch/arm/mach-shmobile/pm-r8a7740.c @@ -10,8 +10,8 @@ */ #include <linux/console.h> #include <linux/suspend.h> -#include <mach/pm-rmobile.h> -#include <mach/common.h> +#include "common.h" +#include "pm-rmobile.h" #ifdef CONFIG_PM static int r8a7740_pd_a4s_suspend(void) diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index d6fe189b2df6..69f70b7f7fb2 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -13,20 +13,33 @@ #include <linux/suspend.h> #include <linux/err.h> #include <linux/pm_clock.h> +#include <linux/pm_domain.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/console.h> + #include <asm/io.h> -#include <mach/common.h> -#include <mach/pm-rcar.h> -#include <mach/r8a7779.h> + +#include "common.h" +#include "pm-rcar.h" +#include "r8a7779.h" /* SYSC */ #define SYSCIER 0x0c #define SYSCIMR 0x10 +struct r8a7779_pm_domain { + struct generic_pm_domain genpd; + struct rcar_sysc_ch ch; +}; + +static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d) +{ + return &container_of(d, struct r8a7779_pm_domain, genpd)->ch; +} + #if defined(CONFIG_PM) || defined(CONFIG_SMP) static void __init r8a7779_sysc_init(void) diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c index fc82839e2c2a..80e8d95e54d3 100644 --- a/arch/arm/mach-shmobile/pm-r8a7790.c +++ b/arch/arm/mach-shmobile/pm-r8a7790.c @@ -11,9 +11,21 @@ */ #include <linux/kernel.h> +#include <linux/smp.h> #include <asm/io.h> -#include <mach/pm-rcar.h> -#include <mach/r8a7790.h> +#include "common.h" +#include "pm-rcar.h" +#include "r8a7790.h" + +/* RST */ +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA7BAR 0x0030 +#define CA15RESCNT 0x0040 +#define CA7RESCNT 0x0044 + +/* On-chip RAM */ +#define MERAM 0xe8080000 /* SYSC */ #define SYSCIER 0x0c @@ -38,8 +50,33 @@ static inline void r8a7790_sysc_init(void) {} void __init r8a7790_pm_init(void) { + void __iomem *p; + u32 bar; static int once; - if (!once++) - r8a7790_sysc_init(); + if (once++) + return; + + /* MERAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(MERAM, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (MERAM >> 8) & 0xfffffc00; + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar, p + CA7BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA7BAR); + + /* de-assert reset for all CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, + p + CA15RESCNT); + writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, + p + CA7RESCNT); + iounmap(p); + + r8a7790_sysc_init(); + shmobile_smp_apmu_suspend_init(); } diff --git a/arch/arm/mach-shmobile/pm-r8a7791.c b/arch/arm/mach-shmobile/pm-r8a7791.c new file mode 100644 index 000000000000..25f107bb3657 --- /dev/null +++ b/arch/arm/mach-shmobile/pm-r8a7791.c @@ -0,0 +1,73 @@ +/* + * r8a7791 Power management support + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <linux/smp.h> +#include <asm/io.h> +#include "common.h" +#include "pm-rcar.h" +#include "r8a7791.h" + +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA15RESCNT 0x0040 +#define RAM 0xe6300000 + +/* SYSC */ +#define SYSCIER 0x0c +#define SYSCIMR 0x10 + +#if defined(CONFIG_SMP) + +static void __init r8a7791_sysc_init(void) +{ + void __iomem *base = rcar_sysc_init(0xe6180000); + + /* enable all interrupt sources, but do not use interrupt handler */ + iowrite32(0x0131000e, base + SYSCIER); + iowrite32(0, base + SYSCIMR); +} + +#else /* CONFIG_SMP */ + +static inline void r8a7791_sysc_init(void) {} + +#endif /* CONFIG_SMP */ + +void __init r8a7791_pm_init(void) +{ + void __iomem *p; + u32 bar; + static int once; + + if (once++) + return; + + /* RAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(RAM, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (RAM >> 8) & 0xfffffc00; + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + + /* enable clocks to all CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, + p + CA15RESCNT); + iounmap(p); + + r8a7791_sysc_init(); + shmobile_smp_apmu_suspend_init(); +} diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c index 1f465a12d1b1..34b8a5674f85 100644 --- a/arch/arm/mach-shmobile/pm-rcar.c +++ b/arch/arm/mach-shmobile/pm-rcar.c @@ -13,7 +13,7 @@ #include <linux/mm.h> #include <linux/spinlock.h> #include <asm/io.h> -#include <mach/pm-rcar.h> +#include "pm-rcar.h" /* SYSC */ #define SYSCSR 0x00 diff --git a/arch/arm/mach-shmobile/include/mach/pm-rcar.h b/arch/arm/mach-shmobile/pm-rcar.h index ef3a1ef628f1..ef3a1ef628f1 100644 --- a/arch/arm/mach-shmobile/include/mach/pm-rcar.h +++ b/arch/arm/mach-shmobile/pm-rcar.h diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index f710235aff2f..ebdd16e94a84 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -17,7 +17,7 @@ #include <linux/pm.h> #include <linux/pm_clock.h> #include <asm/io.h> -#include <mach/pm-rmobile.h> +#include "pm-rmobile.h" /* SYSC */ #define SPDCR IOMEM(0xe6180008) diff --git a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h index 690553a06887..690553a06887 100644 --- a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h +++ b/arch/arm/mach-shmobile/pm-rmobile.h diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 0de75fd394b9..7e5c2676c489 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -21,13 +21,15 @@ #include <linux/irq.h> #include <linux/bitrev.h> #include <linux/console.h> + #include <asm/cpuidle.h> #include <asm/io.h> #include <asm/tlbflush.h> #include <asm/suspend.h> -#include <mach/common.h> -#include <mach/sh7372.h> -#include <mach/pm-rmobile.h> + +#include "common.h" +#include "pm-rmobile.h" +#include "sh7372.h" /* DBG */ #define DBGREG1 IOMEM(0xe6100020) diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c index 99086e98fbbc..a7e466817965 100644 --- a/arch/arm/mach-shmobile/pm-sh73a0.c +++ b/arch/arm/mach-shmobile/pm-sh73a0.c @@ -9,7 +9,7 @@ */ #include <linux/suspend.h> -#include <mach/common.h> +#include "common.h" #ifdef CONFIG_SUSPEND static int sh73a0_enter_suspend(suspend_state_t suspend_state) diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/r7s72100.h index 5f34b20ecd4a..efb723c88dd0 100644 --- a/arch/arm/mach-shmobile/include/mach/r7s72100.h +++ b/arch/arm/mach-shmobile/r7s72100.h @@ -3,6 +3,5 @@ void r7s72100_add_dt_devices(void); void r7s72100_clock_init(void); -void r7s72100_init_early(void); #endif /* __ASM_R7S72100_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h index ce8bdd1d8a8a..ce8bdd1d8a8a 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h +++ b/arch/arm/mach-shmobile/r8a73a4.h diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h index 5e3c9ec06303..1d1a5fd78b6b 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/r8a7740.h @@ -19,8 +19,6 @@ #ifndef __ASM_R8A7740_H__ #define __ASM_R8A7740_H__ -#include <mach/pm-rmobile.h> - /* * MD_CKx pin */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h index f4076a50e970..f4076a50e970 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/r8a7778.h diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h index 88eeceaf1088..5415c719dc19 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/r8a7779.h @@ -2,8 +2,6 @@ #define __ASM_R8A7779_H__ #include <linux/sh_clk.h> -#include <linux/pm_domain.h> -#include <mach/pm-rcar.h> /* HPB-DMA slave IDs */ enum { @@ -12,17 +10,6 @@ enum { HPBDMA_SLAVE_SDHI0_RX, }; -struct r8a7779_pm_domain { - struct generic_pm_domain genpd; - struct rcar_sysc_ch ch; -}; - -static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d) -{ - return &container_of(d, struct r8a7779_pm_domain, genpd)->ch; -} - -extern void r8a7779_init_delay(void); extern void r8a7779_init_irq_extpin(int irlm); extern void r8a7779_init_irq_extpin_dt(int irlm); extern void r8a7779_init_irq_dt(void); @@ -32,6 +19,7 @@ extern void r8a7779_add_early_devices(void); extern void r8a7779_add_standard_devices(void); extern void r8a7779_add_standard_devices_dt(void); extern void r8a7779_init_late(void); +extern u32 r8a7779_read_mode_pins(void); extern void r8a7779_clock_init(void); extern void r8a7779_pinmux_init(void); extern void r8a7779_pm_init(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h index 0b95babe84ba..459827f1369b 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-shmobile/r8a7790.h @@ -1,8 +1,6 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ -#include <mach/rcar-gen2.h> - /* DMA slave IDs */ enum { RCAR_DMA_SLAVE_INVALID, @@ -33,7 +31,6 @@ void r8a7790_add_dt_devices(void); void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); void r8a7790_pm_init(void); -void r8a7790_init_early(void); extern struct smp_operations r8a7790_smp_ops; #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h index 664274cc4b64..86eae7bceb6f 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-shmobile/r8a7791.h @@ -5,6 +5,7 @@ void r8a7791_add_standard_devices(void); void r8a7791_add_dt_devices(void); void r8a7791_clock_init(void); void r8a7791_pinmux_init(void); +void r8a7791_pm_init(void); extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h index 43f606eb2d82..ce53cb5f53a1 100644 --- a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h +++ b/arch/arm/mach-shmobile/rcar-gen2.h @@ -4,5 +4,6 @@ void rcar_gen2_timer_init(void); #define MD(nr) BIT(nr) u32 rcar_gen2_read_mode_pins(void); +void rcar_gen2_reserve(void); #endif /* __ASM_RCAR_GEN2_H__ */ diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index d953ff6e78a2..b06a9e8f59a5 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -16,14 +16,13 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clk-provider.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/of_platform.h> -#include <mach/common.h> +#include <linux/mm.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include "common.h" static struct map_desc emev2_io_desc[] __initdata = { #ifdef CONFIG_SMP @@ -42,17 +41,6 @@ static void __init emev2_map_io(void) iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); } -static void __init emev2_init_delay(void) -{ - shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ -} - -static void __init emev2_add_standard_devices_dt(void) -{ - of_clk_init(NULL); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - static const char *emev2_boards_compat_dt[] __initconst = { "renesas,emev2", NULL, @@ -63,8 +51,7 @@ extern struct smp_operations emev2_smp_ops; DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, - .init_early = emev2_init_delay, - .init_machine = emev2_add_standard_devices_dt, + .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .dt_compat = emev2_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c index 412e179429cd..f3b3b14ba972 100644 --- a/arch/arm/mach-shmobile/setup-r7s72100.c +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -22,18 +22,20 @@ #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/sh_timer.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/r7s72100.h> + #include <asm/mach/arch.h> +#include "common.h" +#include "irqs.h" +#include "r7s72100.h" + static struct resource mtu2_resources[] __initdata = { DEFINE_RES_MEM(0xfcff0000, 0x400), DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"), }; #define r7s72100_register_mtu2() \ - platform_device_register_resndata(&platform_bus, "sh-mtu2", \ + platform_device_register_resndata(NULL, "sh-mtu2", \ -1, mtu2_resources, \ ARRAY_SIZE(mtu2_resources), \ NULL, 0) @@ -43,11 +45,6 @@ void __init r7s72100_add_dt_devices(void) r7s72100_register_mtu2(); } -void __init r7s72100_init_early(void) -{ - shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */ -} - #ifdef CONFIG_USE_OF static const char *r7s72100_boards_compat_dt[] __initdata = { "renesas,r7s72100", @@ -55,7 +52,7 @@ static const char *r7s72100_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)") - .init_early = r7s72100_init_early, + .init_early = shmobile_init_delay, .dt_compat = r7s72100_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index e84b6a5e4b19..6683072a9d98 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -24,12 +24,14 @@ #include <linux/serial_sci.h> #include <linux/sh_dma.h> #include <linux/sh_timer.h> -#include <mach/common.h> -#include <mach/dma-register.h> -#include <mach/irqs.h> -#include <mach/r8a73a4.h> + #include <asm/mach/arch.h> +#include "common.h" +#include "dma-register.h" +#include "irqs.h" +#include "r8a73a4.h" + static const struct resource pfc_resources[] = { DEFINE_RES_MEM(0xe6050000, 0x9000), }; @@ -68,7 +70,7 @@ R8A73A4_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */ R8A73A4_SCIFB(5, 0xe6cf0000, gic_spi(151)); /* SCIFB3 */ #define r8a73a4_register_scif(index) \ - platform_device_register_resndata(&platform_bus, "sh-sci", index, \ + platform_device_register_resndata(NULL, "sh-sci", index, \ scif##index##_resources, \ ARRAY_SIZE(scif##index##_resources), \ &scif##index##_platform_data, \ @@ -149,7 +151,7 @@ static const struct resource irqc1_resources[] = { }; #define r8a73a4_register_irqc(idx) \ - platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + platform_device_register_resndata(NULL, "renesas_irqc", \ idx, irqc##idx##_resources, \ ARRAY_SIZE(irqc##idx##_resources), \ &irqc##idx##_data, \ @@ -179,7 +181,7 @@ static struct resource cmt1_resources[] = { }; #define r8a7790_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ + platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -274,7 +276,7 @@ static struct resource dma_resources[] = { }; #define r8a73a4_register_dmac() \ - platform_device_register_resndata(&platform_bus, "sh-dma-engine", 0, \ + platform_device_register_resndata(NULL, "sh-dma-engine", 0, \ dma_resources, ARRAY_SIZE(dma_resources), \ &dma_pdata, sizeof(dma_pdata)) diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index d0f51f1f697d..3d5eacaba3e6 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -31,16 +31,18 @@ #include <linux/sh_dma.h> #include <linux/sh_timer.h> #include <linux/platform_data/sh_ipmmu.h> -#include <mach/dma-register.h> -#include <mach/r8a7740.h> -#include <mach/pm-rmobile.h> -#include <mach/common.h> -#include <mach/irqs.h> + #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" +#include "dma-register.h" +#include "irqs.h" +#include "pm-rmobile.h" +#include "r8a7740.h" + static struct map_desc r8a7740_io_desc[] __initdata = { /* * for CPGA/INTC/PFC diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 3d5a5ae619bf..f00a488dcf43 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -37,12 +37,14 @@ #include <linux/usb/ehci_pdriver.h> #include <linux/usb/ohci_pdriver.h> #include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/r8a7778.h> -#include <mach/common.h> + #include <asm/mach/arch.h> #include <asm/hardware/cache-l2x0.h> +#include "common.h" +#include "irqs.h" +#include "r8a7778.h" + /* SCIF */ #define R8A7778_SCIF(index, baseaddr, irq) \ static struct plat_sci_port scif##index##_platform_data = { \ @@ -64,7 +66,7 @@ R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a)); R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b)); #define r8a7778_register_scif(index) \ - platform_device_register_resndata(&platform_bus, "sh-sci", index, \ + platform_device_register_resndata(NULL, "sh-sci", index, \ scif##index##_resources, \ ARRAY_SIZE(scif##index##_resources), \ &scif##index##_platform_data, \ @@ -84,7 +86,7 @@ static struct resource sh_tmu0_resources[] = { #define r8a7778_register_tmu(idx) \ platform_device_register_resndata( \ - &platform_bus, "sh-tmu", idx, \ + NULL, "sh-tmu", idx, \ sh_tmu##idx##_resources, \ ARRAY_SIZE(sh_tmu##idx##_resources), \ &sh_tmu##idx##_platform_data, \ @@ -173,7 +175,6 @@ static struct resource ohci_resources[] __initdata = { #define USB_PLATFORM_INFO(hci) \ static struct platform_device_info hci##_info __initdata = { \ - .parent = &platform_bus, \ .name = #hci "-platform", \ .id = -1, \ .res = hci##_resources, \ @@ -212,7 +213,7 @@ R8A7778_GPIO(4); #define r8a7778_register_gpio(idx) \ platform_device_register_resndata( \ - &platform_bus, "gpio_rcar", idx, \ + NULL, "gpio_rcar", idx, \ r8a7778_gpio##idx##_resources, \ ARRAY_SIZE(r8a7778_gpio##idx##_resources), \ &r8a7778_gpio##idx##_platform_data, \ @@ -490,8 +491,8 @@ static struct resource hpb_dmae_resources[] __initdata = { static void __init r8a7778_register_hpb_dmae(void) { - platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1, - hpb_dmae_resources, + platform_device_register_resndata(NULL, "hpb-dma-engine", + -1, hpb_dmae_resources, ARRAY_SIZE(hpb_dmae_resources), &dma_platform_data, sizeof(dma_platform_data)); @@ -565,7 +566,7 @@ void __init r8a7778_init_irq_extpin(int irlm) r8a7778_init_irq_extpin_dt(irlm); if (irlm) platform_device_register_resndata( - &platform_bus, "renesas_intc_irqpin", -1, + NULL, "renesas_intc_irqpin", -1, irqpin_resources, ARRAY_SIZE(irqpin_resources), &irqpin_platform_data, sizeof(irqpin_platform_data)); } diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index aba4ed652d54..236c1befb9e3 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -40,15 +40,17 @@ #include <linux/usb/ehci_pdriver.h> #include <linux/usb/ohci_pdriver.h> #include <linux/pm_runtime.h> -#include <mach/irqs.h> -#include <mach/r8a7779.h> -#include <mach/common.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> #include <asm/hardware/cache-l2x0.h> +#include "common.h" +#include "irqs.h" +#include "r8a7779.h" + static struct map_desc r8a7779_io_desc[] __initdata = { /* 2M entity map for 0xf0000000 (MPCORE) */ { @@ -123,7 +125,7 @@ void __init r8a7779_init_irq_extpin(int irlm) r8a7779_init_irq_extpin_dt(irlm); if (irlm) platform_device_register_resndata( - &platform_bus, "renesas_intc_irqpin", -1, + NULL, "renesas_intc_irqpin", -1, irqpin0_resources, ARRAY_SIZE(irqpin0_resources), &irqpin0_platform_data, sizeof(irqpin0_platform_data)); } @@ -632,24 +634,24 @@ static struct resource hpb_dmae_resources[] __initdata = { static void __init r8a7779_register_hpb_dmae(void) { - platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1, - hpb_dmae_resources, + platform_device_register_resndata(NULL, "hpb-dma-engine", + -1, hpb_dmae_resources, ARRAY_SIZE(hpb_dmae_resources), &dma_platform_data, sizeof(dma_platform_data)); } static struct platform_device *r8a7779_devices_dt[] __initdata = { + &tmu0_device, +}; + +static struct platform_device *r8a7779_standard_devices[] __initdata = { &scif0_device, &scif1_device, &scif2_device, &scif3_device, &scif4_device, &scif5_device, - &tmu0_device, -}; - -static struct platform_device *r8a7779_standard_devices[] __initdata = { &i2c0_device, &i2c1_device, &i2c2_device, @@ -674,16 +676,6 @@ void __init r8a7779_add_standard_devices(void) r8a7779_register_hpb_dmae(); } -/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ -void __init __weak r8a7779_register_twd(void) { } - -void __init r8a7779_earlytimer_init(void) -{ - r8a7779_clock_init(); - r8a7779_register_twd(); - shmobile_earlytimer_init(); -} - void __init r8a7779_add_early_devices(void) { early_platform_add_devices(r8a7779_devices_dt, @@ -747,19 +739,28 @@ void __init r8a7779_init_irq_dt(void) __raw_writel(0x003fee3f, INT2SMSKCR4); } -void __init r8a7779_init_delay(void) +void __init r8a7779_add_standard_devices_dt(void) { - shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */ + platform_add_devices(r8a7779_devices_dt, + ARRAY_SIZE(r8a7779_devices_dt)); } -void __init r8a7779_add_standard_devices_dt(void) +#define MODEMR 0xffcc0020 + +u32 __init r8a7779_read_mode_pins(void) { - /* clocks are setup late during boot in the case of DT */ - r8a7779_clock_init(); + static u32 mode; + static bool mode_valid; + + if (!mode_valid) { + void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + mode_valid = true; + } - platform_add_devices(r8a7779_devices_dt, - ARRAY_SIZE(r8a7779_devices_dt)); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + return mode; } static const char *r8a7779_compat_dt[] __initdata = { @@ -769,7 +770,7 @@ static const char *r8a7779_compat_dt[] __initdata = { DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") .map_io = r8a7779_map_io, - .init_early = r8a7779_init_delay, + .init_early = shmobile_init_delay, .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq_dt, .init_machine = r8a7779_add_standard_devices_dt, diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 6bd08b127fa4..0c12b01bb9e3 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -26,12 +26,15 @@ #include <linux/serial_sci.h> #include <linux/sh_dma.h> #include <linux/sh_timer.h> -#include <mach/common.h> -#include <mach/dma-register.h> -#include <mach/irqs.h> -#include <mach/r8a7790.h> + #include <asm/mach/arch.h> +#include "common.h" +#include "dma-register.h" +#include "irqs.h" +#include "r8a7790.h" +#include "rcar-gen2.h" + /* Audio-DMAC */ #define AUDIO_DMAC_SLAVE(_id, _addr, t, r) \ { \ @@ -113,7 +116,7 @@ static struct resource r8a7790_audio_dmac_resources[] = { #define r8a7790_register_audio_dmac(id) \ platform_device_register_resndata( \ - &platform_bus, "sh-dma-engine", id, \ + NULL, "sh-dma-engine", id, \ &r8a7790_audio_dmac_resources[id * 3], 3, \ &r8a7790_audio_dmac_platform_data, \ sizeof(r8a7790_audio_dmac_platform_data)) @@ -149,7 +152,7 @@ R8A7790_GPIO(4); R8A7790_GPIO(5); #define r8a7790_register_gpio(idx) \ - platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \ + platform_device_register_resndata(NULL, "gpio_rcar", idx, \ r8a7790_gpio##idx##_resources, \ ARRAY_SIZE(r8a7790_gpio##idx##_resources), \ &r8a7790_gpio##idx##_platform_data, \ @@ -227,7 +230,7 @@ R8A7790_HSCIF(8, 0xe62c0000, gic_spi(154)); /* HSCIF0 */ R8A7790_HSCIF(9, 0xe62c8000, gic_spi(155)); /* HSCIF1 */ #define r8a7790_register_scif(index) \ - platform_device_register_resndata(&platform_bus, "sh-sci", index, \ + platform_device_register_resndata(NULL, "sh-sci", index, \ scif##index##_resources, \ ARRAY_SIZE(scif##index##_resources), \ &scif##index##_platform_data, \ @@ -246,7 +249,7 @@ static const struct resource irqc0_resources[] __initconst = { }; #define r8a7790_register_irqc(idx) \ - platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + platform_device_register_resndata(NULL, "renesas_irqc", \ idx, irqc##idx##_resources, \ ARRAY_SIZE(irqc##idx##_resources), \ &irqc##idx##_data, \ @@ -273,7 +276,7 @@ static struct resource cmt0_resources[] = { }; #define r8a7790_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ + platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -307,13 +310,6 @@ void __init r8a7790_add_standard_devices(void) r8a7790_register_audio_dmac(1); } -void __init r8a7790_init_early(void) -{ -#ifndef CONFIG_ARM_ARCH_TIMER - shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ -#endif -} - #ifdef CONFIG_USE_OF static const char * const r8a7790_boards_compat_dt[] __initconst = { @@ -323,8 +319,10 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = { DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") .smp = smp_ops(r8a7790_smp_ops), - .init_early = r8a7790_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, + .init_late = shmobile_init_late, + .reserve = rcar_gen2_reserve, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index 04a96ddb3224..d47d8b16a43f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -26,12 +26,14 @@ #include <linux/platform_data/irq-renesas-irqc.h> #include <linux/serial_sci.h> #include <linux/sh_timer.h> -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/r8a7791.h> -#include <mach/rcar-gen2.h> + #include <asm/mach/arch.h> +#include "common.h" +#include "irqs.h" +#include "r8a7791.h" +#include "rcar-gen2.h" + static const struct resource pfc_resources[] __initconst = { DEFINE_RES_MEM(0xe6060000, 0x250), }; @@ -65,7 +67,7 @@ R8A7791_GPIO(6, 0xe6055400, 32); R8A7791_GPIO(7, 0xe6055800, 26); #define r8a7791_register_gpio(idx) \ - platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \ + platform_device_register_resndata(NULL, "gpio_rcar", idx, \ r8a7791_gpio##idx##_resources, \ ARRAY_SIZE(r8a7791_gpio##idx##_resources), \ &r8a7791_gpio##idx##_platform_data, \ @@ -122,7 +124,7 @@ R8A7791_SCIFA(13, 0xe6c78000, gic_spi(30)); /* SCIFA4 */ R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */ #define r8a7791_register_scif(index) \ - platform_device_register_resndata(&platform_bus, "sh-sci", index, \ + platform_device_register_resndata(NULL, "sh-sci", index, \ scif##index##_resources, \ ARRAY_SIZE(scif##index##_resources), \ &scif##index##_platform_data, \ @@ -138,7 +140,7 @@ static struct resource cmt0_resources[] = { }; #define r8a7791_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ + platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -163,7 +165,7 @@ static struct resource irqc0_resources[] = { }; #define r8a7791_register_irqc(idx) \ - platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + platform_device_register_resndata(NULL, "renesas_irqc", \ idx, irqc##idx##_resources, \ ARRAY_SIZE(irqc##idx##_resources), \ &irqc##idx##_data, \ @@ -217,6 +219,8 @@ DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") .smp = smp_ops(r8a7791_smp_ops), .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, + .init_late = shmobile_init_late, + .reserve = rcar_gen2_reserve, .dt_compat = r8a7791_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 542c5a47173f..42d5b4308923 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -20,11 +20,14 @@ #include <linux/clk/shmobile.h> #include <linux/clocksource.h> +#include <linux/device.h> +#include <linux/dma-contiguous.h> #include <linux/io.h> #include <linux/kernel.h> -#include <mach/common.h> -#include <mach/rcar-gen2.h> +#include <linux/of_fdt.h> #include <asm/mach/arch.h> +#include "common.h" +#include "rcar-gen2.h" #define MODEMR 0xe6160060 @@ -110,3 +113,72 @@ void __init rcar_gen2_timer_init(void) #endif clocksource_of_init(); } + +struct memory_reserve_config { + u64 reserved; + u64 base, size; +}; + +static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname, + int depth, void *data) +{ + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *reg, *endp; + int l; + struct memory_reserve_config *mrc = data; + u64 lpae_start = 1ULL << 32; + + /* We are scanning "memory" nodes only */ + if (type == NULL || strcmp(type, "memory")) + return 0; + + reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + return 0; + + endp = reg + (l / sizeof(__be32)); + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; + + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); + + if (base >= lpae_start) + continue; + + if ((base + size) >= lpae_start) + size = lpae_start - base; + + if (size < mrc->reserved) + continue; + + if (base < mrc->base) + continue; + + /* keep the area at top near the 32-bit legacy limit */ + mrc->base = base + size - mrc->reserved; + mrc->size = mrc->reserved; + } + + return 0; +} + +struct cma *rcar_gen2_dma_contiguous; + +void __init rcar_gen2_reserve(void) +{ + struct memory_reserve_config mrc; + + /* reserve 256 MiB at the top of the physical legacy 32-bit space */ + memset(&mrc, 0, sizeof(mrc)); + mrc.reserved = SZ_256M; + + of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); +#ifdef CONFIG_DMA_CMA + if (mrc.size) + dma_contiguous_reserve_area(mrc.size, mrc.base, 0, + &rcar_gen2_dma_contiguous, true); +#endif +} diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 2a8b9f2a2f54..9cdfcdfd38fc 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -29,20 +29,22 @@ #include <linux/io.h> #include <linux/serial_sci.h> #include <linux/sh_dma.h> -#include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <linux/pm_domain.h> #include <linux/dma-mapping.h> #include <linux/platform_data/sh_ipmmu.h> -#include <mach/dma-register.h> -#include <mach/irqs.h> -#include <mach/sh7372.h> -#include <mach/common.h> + #include <asm/mach/map.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" +#include "dma-register.h" +#include "irqs.h" +#include "pm-rmobile.h" +#include "sh7372.h" + static struct map_desc sh7372_io_desc[] __initdata = { /* create a 1:1 entity map for 0xe6xxxxxx * used by CPGA, INTC and PFC. diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 2e1e2894a784..2c802ae9b241 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -29,19 +29,20 @@ #include <linux/io.h> #include <linux/serial_sci.h> #include <linux/sh_dma.h> -#include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <linux/platform_data/sh_ipmmu.h> #include <linux/platform_data/irq-renesas-intc-irqpin.h> -#include <mach/dma-register.h> -#include <mach/irqs.h> -#include <mach/sh73a0.h> -#include <mach/common.h> + #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" +#include "dma-register.h" +#include "irqs.h" +#include "sh73a0.h" + static struct map_desc sh73a0_io_desc[] __initdata = { /* create a 1:1 entity map for 0xe6xxxxxx * used by CPGA, INTC and PFC. diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/sh7372.h index 854a9f0ca040..4ad960d5075b 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/sh7372.h @@ -11,10 +11,6 @@ #ifndef __ASM_SH7372_H__ #define __ASM_SH7372_H__ -#include <linux/sh_clk.h> -#include <linux/pm_domain.h> -#include <mach/pm-rmobile.h> - /* DMA slave IDs */ enum { SHDMA_SLAVE_INVALID, diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h index 359b582dc270..359b582dc270 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/sh73a0.h diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 2dfd748da7f3..6ff1df1df9a7 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -23,9 +23,9 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <mach/common.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> +#include "common.h" #define EMEV2_SCU_BASE 0x1e000000 #define EMEV2_SMU_BASE 0xe0110000 diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index e7a3201473d0..3100e355c3fd 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -23,14 +23,16 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <mach/common.h> -#include <mach/pm-rcar.h> -#include <mach/r8a7779.h> + #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> +#include "common.h" +#include "pm-rcar.h" +#include "r8a7779.h" + #define AVECR IOMEM(0xfe700040) #define R8A7779_SCU_BASE 0xf0000000 diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c index 591052799e8f..2311694636e1 100644 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -17,17 +17,12 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> + #include <asm/smp_plat.h> -#include <mach/common.h> -#include <mach/pm-rcar.h> -#include <mach/r8a7790.h> -#define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA7BAR 0x0030 -#define CA15RESCNT 0x0040 -#define CA7RESCNT 0x0044 -#define MERAM 0xe8080000 +#include "common.h" +#include "pm-rcar.h" +#include "r8a7790.h" static struct rcar_sysc_ch r8a7790_ca15_scu = { .chan_offs = 0x180, /* PWRSR5 .. PWRER5 */ @@ -41,32 +36,9 @@ static struct rcar_sysc_ch r8a7790_ca7_scu = { static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) { - void __iomem *p; - u32 bar; - /* let APMU code install data related to shmobile_boot_vector */ shmobile_smp_apmu_prepare_cpus(max_cpus); - /* MERAM for jump stub, because BAR requires 256KB aligned address */ - p = ioremap_nocache(MERAM, shmobile_boot_size); - memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); - iounmap(p); - - /* setup reset vectors */ - p = ioremap_nocache(RST, 0x63); - bar = (MERAM >> 8) & 0xfffffc00; - writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar, p + CA7BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA7BAR); - - /* enable clocks to all CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, - p + CA15RESCNT); - writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, - p + CA7RESCNT); - iounmap(p); - /* turn on power to SCU */ r8a7790_pm_init(); rcar_sysc_power_up(&r8a7790_ca15_scu); diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index ec979529f30f..f743386166fb 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -17,39 +17,19 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> + #include <asm/smp_plat.h> -#include <mach/common.h> -#include <mach/r8a7791.h> -#include <mach/rcar-gen2.h> -#define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA15RESCNT 0x0040 -#define RAM 0xe6300000 +#include "common.h" +#include "r8a7791.h" +#include "rcar-gen2.h" static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) { - void __iomem *p; - u32 bar; - /* let APMU code install data related to shmobile_boot_vector */ shmobile_smp_apmu_prepare_cpus(max_cpus); - /* RAM for jump stub, because BAR requires 256KB aligned address */ - p = ioremap_nocache(RAM, shmobile_boot_size); - memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); - iounmap(p); - - /* setup reset vectors */ - p = ioremap_nocache(RST, 0x63); - bar = (RAM >> 8) & 0xfffffc00; - writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); - - /* enable clocks to all CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, - p + CA15RESCNT); - iounmap(p); + r8a7791_pm_init(); } static int r8a7791_smp_boot_secondary(unsigned int cpu, diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 13ba36a6831f..22d8f87b23e9 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -22,11 +22,13 @@ #include <linux/smp.h> #include <linux/io.h> #include <linux/delay.h> -#include <mach/common.h> -#include <mach/sh73a0.h> + #include <asm/smp_plat.h> #include <asm/smp_twd.h> +#include "common.h" +#include "sh73a0.h" + #define WUPCR IOMEM(0xe6151010) #define SRESCR IOMEM(0xe6151018) #define PSTR IOMEM(0xe6151040) diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c index 824b12a56a42..d9ce4d8000f0 100644 --- a/arch/arm/mach-spear/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -42,7 +42,7 @@ static const char * const spear1310_dt_board_compat[] = { * PHYSICAL VIRTUAL * 0xD8000000 0xFA000000 */ -struct map_desc spear1310_io_desc[] __initdata = { +static struct map_desc spear1310_io_desc[] __initdata = { { .virtual = VA_SPEAR1310_RAS_GRP1_BASE, .pfn = __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE), diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c index 7b6bff7154e1..c601799b4aea 100644 --- a/arch/arm/mach-spear/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -93,7 +93,7 @@ static int sata_miphy_init(struct device *dev, void __iomem *addr) return 0; } -void sata_miphy_exit(struct device *dev) +static void sata_miphy_exit(struct device *dev) { writel(0, SPEAR1340_PCIE_SATA_CFG); writel(0, SPEAR1340_PCIE_MIPHY_CFG); @@ -107,7 +107,7 @@ void sata_miphy_exit(struct device *dev) msleep(20); } -int sata_suspend(struct device *dev) +static int sata_suspend(struct device *dev) { if (dev->power.power_state.event == PM_EVENT_FREEZE) return 0; @@ -117,7 +117,7 @@ int sata_suspend(struct device *dev) return 0; } -int sata_resume(struct device *dev) +static int sata_resume(struct device *dev) { if (dev->power.power_state.event == PM_EVENT_THAW) return 0; diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index c9897ea38980..8b56fe61a492 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -57,7 +57,7 @@ void __init spear13xx_l2x0_init(void) * 0xEC000000 0xFC000000 * 0xED000000 0xFB000000 */ -struct map_desc spear13xx_io_desc[] __initdata = { +static struct map_desc spear13xx_io_desc[] __initdata = { { .virtual = (unsigned long)VA_PERIP_GRP2_BASE, .pfn = __phys_to_pfn(PERIP_GRP2_BASE), diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c index fa2c33ffac04..d4b624f8dfcb 100644 --- a/arch/arm/mach-sti/platsmp.c +++ b/arch/arm/mach-sti/platsmp.c @@ -36,7 +36,7 @@ static void write_pen_release(int val) static DEFINE_SPINLOCK(boot_lock); -void sti_secondary_init(unsigned int cpu) +static void sti_secondary_init(unsigned int cpu) { trace_hardirqs_off(); @@ -53,7 +53,7 @@ void sti_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; @@ -97,7 +97,7 @@ int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) return pen_release != -1 ? -ENOSYS : 0; } -void __init sti_smp_prepare_cpus(unsigned int max_cpus) +static void __init sti_smp_prepare_cpus(unsigned int max_cpus) { void __iomem *scu_base = NULL; struct device_node *np = of_find_compatible_node( diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 0fbd4f156bfa..1aaa1e15ef70 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -4,7 +4,6 @@ menuconfig ARCH_SUNXI select CLKSRC_MMIO select GENERIC_IRQ_CHIP select PINCTRL - select PINCTRL_SUNXI select SUN4I_TIMER if ARCH_SUNXI @@ -35,4 +34,12 @@ config MACH_SUN7I select HAVE_ARM_ARCH_TIMER select SUN5I_HSTIMER +config MACH_SUN8I + bool "Allwinner A23 (sun8i) SoCs support" + default ARCH_SUNXI + select ARCH_HAS_RESET_CONTROLLER + select ARM_GIC + select MFD_SUN6I_PRCM + select RESET_CONTROLLER + endif diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index b6085084e0ff..42d4753683ce 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -130,3 +130,12 @@ DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") .dt_compat = sun7i_board_dt_compat, .restart = sun4i_restart, MACHINE_END + +static const char * const sun8i_board_dt_compat[] = { + "allwinner,sun8i-a23", + NULL, +}; + +DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family") + .dt_compat = sun8i_board_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index c303b55de22e..e48a74458c25 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -2,9 +2,7 @@ asflags-y += -march=armv7-a obj-y += io.o obj-y += irq.o -obj-y += pmc.o obj-y += flowctrl.o -obj-y += powergate.o obj-y += pm.o obj-y += reset.o obj-y += reset-handler.o diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index bcf5dbf69d58..da90c89296b9 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -28,13 +28,6 @@ void __init tegra_map_common_io(void); void __init tegra_init_irq(void); -int __init tegra_powergate_init(void); -#if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS) -int __init tegra_powergate_debugfs_init(void); -#else -static inline int tegra_powergate_debugfs_init(void) { return 0; } -#endif - void __init tegra_paz00_wifikill_init(void); #endif diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index d60339c996cb..6fc71f1534b0 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/smp.h> +#include <soc/tegra/common.h> #include <soc/tegra/fuse.h> #include <asm/smp_plat.h> @@ -38,6 +39,11 @@ int tegra_cpu_kill(unsigned cpu) */ void __ref tegra_cpu_die(unsigned int cpu) { + if (!tegra_hotplug_shutdown) { + WARN(1, "hotplug is not yet initialized\n"); + return; + } + /* Clean L1 data cache */ tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS); @@ -48,10 +54,13 @@ void __ref tegra_cpu_die(unsigned int cpu) BUG(); } -void __init tegra_hotplug_init(void) +static int __init tegra_hotplug_init(void) { if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) - return; + return 0; + + if (!soc_is_tegra()) + return 0; if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_get_chip_id() == TEGRA20) tegra_hotplug_shutdown = tegra20_hotplug_shutdown; @@ -61,4 +70,7 @@ void __init tegra_hotplug_init(void) tegra_hotplug_shutdown = tegra30_hotplug_shutdown; if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_get_chip_id() == TEGRA124) tegra_hotplug_shutdown = tegra30_hotplug_shutdown; + + return 0; } +pure_initcall(tegra_hotplug_init); diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 0466a145b500..b45086666648 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -22,6 +22,7 @@ #include <linux/smp.h> #include <soc/tegra/fuse.h> +#include <soc/tegra/pmc.h> #include <asm/cacheflush.h> #include <asm/mach-types.h> @@ -31,7 +32,6 @@ #include "common.h" #include "flowctrl.h" #include "iomap.h" -#include "pmc.h" #include "reset.h" static cpumask_t tegra_cpu_init_mask; diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 94db3b6664df..b0f48a3946fa 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -28,6 +28,8 @@ #include <linux/suspend.h> #include <soc/tegra/fuse.h> +#include <soc/tegra/pm.h> +#include <soc/tegra/pmc.h> #include <asm/cacheflush.h> #include <asm/idmap.h> @@ -38,7 +40,6 @@ #include "flowctrl.h" #include "iomap.h" -#include "pmc.h" #include "pm.h" #include "reset.h" #include "sleep.h" @@ -167,9 +168,29 @@ static int tegra_sleep_cpu(unsigned long v2p) return 0; } +static void tegra_pm_set(enum tegra_suspend_mode mode) +{ + u32 value; + + switch (tegra_get_chip_id()) { + case TEGRA20: + case TEGRA30: + break; + default: + /* Turn off CRAIL */ + value = flowctrl_read_cpu_csr(0); + value &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK; + value |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL; + flowctrl_write_cpu_csr(0, value); + break; + } + + tegra_pmc_enter_suspend_mode(mode); +} + void tegra_idle_lp2_last(void) { - tegra_pmc_pm_set(TEGRA_SUSPEND_LP2); + tegra_pm_set(TEGRA_SUSPEND_LP2); cpu_cluster_pm_enter(); suspend_cpu_complex(); @@ -268,8 +289,6 @@ static bool tegra_sleep_core_init(void) static void tegra_suspend_enter_lp1(void) { - tegra_pmc_suspend(); - /* copy the reset vector & SDRAM shutdown code into IRAM */ memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_size); @@ -281,8 +300,6 @@ static void tegra_suspend_enter_lp1(void) static void tegra_suspend_exit_lp1(void) { - tegra_pmc_resume(); - /* restore IRAM */ memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr, iram_save_size); @@ -307,7 +324,7 @@ static int tegra_suspend_enter(suspend_state_t state) pr_info("Entering suspend state %s\n", lp_state[mode]); - tegra_pmc_pm_set(mode); + tegra_pm_set(mode); local_fiq_disable(); @@ -355,7 +372,6 @@ void __init tegra_init_suspend(void) return; tegra_tear_down_cpu_init(); - tegra_pmc_suspend_init(); if (mode >= TEGRA_SUSPEND_LP1) { if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) { diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index f4a89698e5b0..83bc87583446 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -21,12 +21,11 @@ #ifndef _MACH_TEGRA_PM_H_ #define _MACH_TEGRA_PM_H_ -#include "pmc.h" - struct tegra_lp1_iram { void *start_addr; void *end_addr; }; + extern struct tegra_lp1_iram tegra_lp1_iram; extern void (*tegra_sleep_core_finish)(unsigned long v2p); @@ -42,15 +41,8 @@ void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); #ifdef CONFIG_PM_SLEEP -enum tegra_suspend_mode tegra_pm_validate_suspend_mode( - enum tegra_suspend_mode mode); void tegra_init_suspend(void); #else -static inline enum tegra_suspend_mode tegra_pm_validate_suspend_mode( - enum tegra_suspend_mode mode) -{ - return TEGRA_SUSPEND_NONE; -} static inline void tegra_init_suspend(void) {} #endif diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c deleted file mode 100644 index 69df18090c8b..000000000000 --- a/arch/arm/mach-tegra/pmc.c +++ /dev/null @@ -1,414 +0,0 @@ -/* - * Copyright (C) 2012,2013 NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - */ - -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include <soc/tegra/fuse.h> -#include <soc/tegra/powergate.h> - -#include "flowctrl.h" -#include "pm.h" -#include "pmc.h" -#include "sleep.h" - -#define TEGRA_POWER_SYSCLK_POLARITY (1 << 10) /* sys clk polarity */ -#define TEGRA_POWER_SYSCLK_OE (1 << 11) /* system clock enable */ -#define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */ -#define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ -#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ - -#define PMC_CTRL 0x0 -#define PMC_CTRL_INTR_LOW (1 << 17) -#define PMC_PWRGATE_TOGGLE 0x30 -#define PMC_PWRGATE_TOGGLE_START (1 << 8) -#define PMC_REMOVE_CLAMPING 0x34 -#define PMC_PWRGATE_STATUS 0x38 - -#define PMC_SCRATCH0 0x50 -#define PMC_SCRATCH0_MODE_RECOVERY (1 << 31) -#define PMC_SCRATCH0_MODE_BOOTLOADER (1 << 30) -#define PMC_SCRATCH0_MODE_RCM (1 << 1) -#define PMC_SCRATCH0_MODE_MASK (PMC_SCRATCH0_MODE_RECOVERY | \ - PMC_SCRATCH0_MODE_BOOTLOADER | \ - PMC_SCRATCH0_MODE_RCM) - -#define PMC_CPUPWRGOOD_TIMER 0xc8 -#define PMC_CPUPWROFF_TIMER 0xcc - -static u8 tegra_cpu_domains[] = { - 0xFF, /* not available for CPU0 */ - TEGRA_POWERGATE_CPU1, - TEGRA_POWERGATE_CPU2, - TEGRA_POWERGATE_CPU3, -}; -static DEFINE_SPINLOCK(tegra_powergate_lock); - -static void __iomem *tegra_pmc_base; -static bool tegra_pmc_invert_interrupt; -static struct clk *tegra_pclk; - -struct pmc_pm_data { - u32 cpu_good_time; /* CPU power good time in uS */ - u32 cpu_off_time; /* CPU power off time in uS */ - u32 core_osc_time; /* Core power good osc time in uS */ - u32 core_pmu_time; /* Core power good pmu time in uS */ - u32 core_off_time; /* Core power off time in uS */ - bool corereq_high; /* Core power request active-high */ - bool sysclkreq_high; /* System clock request active-high */ - bool combined_req; /* Combined pwr req for CPU & Core */ - bool cpu_pwr_good_en; /* CPU power good signal is enabled */ - u32 lp0_vec_phy_addr; /* The phy addr of LP0 warm boot code */ - u32 lp0_vec_size; /* The size of LP0 warm boot code */ - enum tegra_suspend_mode suspend_mode; -}; -static struct pmc_pm_data pmc_pm_data; - -static inline u32 tegra_pmc_readl(u32 reg) -{ - return readl(tegra_pmc_base + reg); -} - -static inline void tegra_pmc_writel(u32 val, u32 reg) -{ - writel(val, tegra_pmc_base + reg); -} - -static int tegra_pmc_get_cpu_powerdomain_id(int cpuid) -{ - if (cpuid <= 0 || cpuid >= num_possible_cpus()) - return -EINVAL; - return tegra_cpu_domains[cpuid]; -} - -static bool tegra_pmc_powergate_is_powered(int id) -{ - return (tegra_pmc_readl(PMC_PWRGATE_STATUS) >> id) & 1; -} - -static int tegra_pmc_powergate_set(int id, bool new_state) -{ - bool old_state; - unsigned long flags; - - spin_lock_irqsave(&tegra_powergate_lock, flags); - - old_state = tegra_pmc_powergate_is_powered(id); - WARN_ON(old_state == new_state); - - tegra_pmc_writel(PMC_PWRGATE_TOGGLE_START | id, PMC_PWRGATE_TOGGLE); - - spin_unlock_irqrestore(&tegra_powergate_lock, flags); - - return 0; -} - -static int tegra_pmc_powergate_remove_clamping(int id) -{ - u32 mask; - - /* - * Tegra has a bug where PCIE and VDE clamping masks are - * swapped relatively to the partition ids. - */ - if (id == TEGRA_POWERGATE_VDEC) - mask = (1 << TEGRA_POWERGATE_PCIE); - else if (id == TEGRA_POWERGATE_PCIE) - mask = (1 << TEGRA_POWERGATE_VDEC); - else - mask = (1 << id); - - tegra_pmc_writel(mask, PMC_REMOVE_CLAMPING); - - return 0; -} - -bool tegra_pmc_cpu_is_powered(int cpuid) -{ - int id; - - id = tegra_pmc_get_cpu_powerdomain_id(cpuid); - if (id < 0) - return false; - return tegra_pmc_powergate_is_powered(id); -} - -int tegra_pmc_cpu_power_on(int cpuid) -{ - int id; - - id = tegra_pmc_get_cpu_powerdomain_id(cpuid); - if (id < 0) - return id; - return tegra_pmc_powergate_set(id, true); -} - -int tegra_pmc_cpu_remove_clamping(int cpuid) -{ - int id; - - id = tegra_pmc_get_cpu_powerdomain_id(cpuid); - if (id < 0) - return id; - return tegra_pmc_powergate_remove_clamping(id); -} - -void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) -{ - u32 val; - - val = tegra_pmc_readl(PMC_SCRATCH0); - val &= ~PMC_SCRATCH0_MODE_MASK; - - if (cmd) { - if (strcmp(cmd, "recovery") == 0) - val |= PMC_SCRATCH0_MODE_RECOVERY; - - if (strcmp(cmd, "bootloader") == 0) - val |= PMC_SCRATCH0_MODE_BOOTLOADER; - - if (strcmp(cmd, "forced-recovery") == 0) - val |= PMC_SCRATCH0_MODE_RCM; - } - - tegra_pmc_writel(val, PMC_SCRATCH0); - - val = tegra_pmc_readl(0); - val |= 0x10; - tegra_pmc_writel(val, 0); -} - -#ifdef CONFIG_PM_SLEEP -static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate) -{ - unsigned long long ticks; - unsigned long long pclk; - static unsigned long tegra_last_pclk; - - if (WARN_ON_ONCE(rate <= 0)) - pclk = 100000000; - else - pclk = rate; - - if ((rate != tegra_last_pclk)) { - ticks = (us_on * pclk) + 999999ull; - do_div(ticks, 1000000); - tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWRGOOD_TIMER); - - ticks = (us_off * pclk) + 999999ull; - do_div(ticks, 1000000); - tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWROFF_TIMER); - wmb(); - } - tegra_last_pclk = pclk; -} - -enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void) -{ - return pmc_pm_data.suspend_mode; -} - -void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode) -{ - if (mode < TEGRA_SUSPEND_NONE || mode >= TEGRA_MAX_SUSPEND_MODE) - return; - - pmc_pm_data.suspend_mode = mode; -} - -void tegra_pmc_suspend(void) -{ - tegra_pmc_writel(virt_to_phys(tegra_resume), PMC_SCRATCH41); -} - -void tegra_pmc_resume(void) -{ - tegra_pmc_writel(0x0, PMC_SCRATCH41); -} - -void tegra_pmc_pm_set(enum tegra_suspend_mode mode) -{ - u32 reg, csr_reg; - unsigned long rate = 0; - - reg = tegra_pmc_readl(PMC_CTRL); - reg |= TEGRA_POWER_CPU_PWRREQ_OE; - reg &= ~TEGRA_POWER_EFFECT_LP0; - - switch (tegra_get_chip_id()) { - case TEGRA20: - case TEGRA30: - break; - default: - /* Turn off CRAIL */ - csr_reg = flowctrl_read_cpu_csr(0); - csr_reg &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK; - csr_reg |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL; - flowctrl_write_cpu_csr(0, csr_reg); - break; - } - - switch (mode) { - case TEGRA_SUSPEND_LP1: - rate = 32768; - break; - case TEGRA_SUSPEND_LP2: - rate = clk_get_rate(tegra_pclk); - break; - default: - break; - } - - set_power_timers(pmc_pm_data.cpu_good_time, pmc_pm_data.cpu_off_time, - rate); - - tegra_pmc_writel(reg, PMC_CTRL); -} - -void tegra_pmc_suspend_init(void) -{ - u32 reg; - - /* Always enable CPU power request */ - reg = tegra_pmc_readl(PMC_CTRL); - reg |= TEGRA_POWER_CPU_PWRREQ_OE; - tegra_pmc_writel(reg, PMC_CTRL); - - reg = tegra_pmc_readl(PMC_CTRL); - - if (!pmc_pm_data.sysclkreq_high) - reg |= TEGRA_POWER_SYSCLK_POLARITY; - else - reg &= ~TEGRA_POWER_SYSCLK_POLARITY; - - /* configure the output polarity while the request is tristated */ - tegra_pmc_writel(reg, PMC_CTRL); - - /* now enable the request */ - reg |= TEGRA_POWER_SYSCLK_OE; - tegra_pmc_writel(reg, PMC_CTRL); -} -#endif - -static const struct of_device_id matches[] __initconst = { - { .compatible = "nvidia,tegra124-pmc" }, - { .compatible = "nvidia,tegra114-pmc" }, - { .compatible = "nvidia,tegra30-pmc" }, - { .compatible = "nvidia,tegra20-pmc" }, - { } -}; - -void __init tegra_pmc_init_irq(void) -{ - struct device_node *np; - u32 val; - - np = of_find_matching_node(NULL, matches); - BUG_ON(!np); - - tegra_pmc_base = of_iomap(np, 0); - - tegra_pmc_invert_interrupt = of_property_read_bool(np, - "nvidia,invert-interrupt"); - - val = tegra_pmc_readl(PMC_CTRL); - if (tegra_pmc_invert_interrupt) - val |= PMC_CTRL_INTR_LOW; - else - val &= ~PMC_CTRL_INTR_LOW; - tegra_pmc_writel(val, PMC_CTRL); -} - -void __init tegra_pmc_init(void) -{ - struct device_node *np; - u32 prop; - enum tegra_suspend_mode suspend_mode; - u32 core_good_time[2] = {0, 0}; - u32 lp0_vec[2] = {0, 0}; - - np = of_find_matching_node(NULL, matches); - BUG_ON(!np); - - tegra_pclk = of_clk_get_by_name(np, "pclk"); - WARN_ON(IS_ERR(tegra_pclk)); - - /* Grabbing the power management configurations */ - if (of_property_read_u32(np, "nvidia,suspend-mode", &prop)) { - suspend_mode = TEGRA_SUSPEND_NONE; - } else { - switch (prop) { - case 0: - suspend_mode = TEGRA_SUSPEND_LP0; - break; - case 1: - suspend_mode = TEGRA_SUSPEND_LP1; - break; - case 2: - suspend_mode = TEGRA_SUSPEND_LP2; - break; - default: - suspend_mode = TEGRA_SUSPEND_NONE; - break; - } - } - suspend_mode = tegra_pm_validate_suspend_mode(suspend_mode); - - if (of_property_read_u32(np, "nvidia,cpu-pwr-good-time", &prop)) - suspend_mode = TEGRA_SUSPEND_NONE; - pmc_pm_data.cpu_good_time = prop; - - if (of_property_read_u32(np, "nvidia,cpu-pwr-off-time", &prop)) - suspend_mode = TEGRA_SUSPEND_NONE; - pmc_pm_data.cpu_off_time = prop; - - if (of_property_read_u32_array(np, "nvidia,core-pwr-good-time", - core_good_time, ARRAY_SIZE(core_good_time))) - suspend_mode = TEGRA_SUSPEND_NONE; - pmc_pm_data.core_osc_time = core_good_time[0]; - pmc_pm_data.core_pmu_time = core_good_time[1]; - - if (of_property_read_u32(np, "nvidia,core-pwr-off-time", - &prop)) - suspend_mode = TEGRA_SUSPEND_NONE; - pmc_pm_data.core_off_time = prop; - - pmc_pm_data.corereq_high = of_property_read_bool(np, - "nvidia,core-power-req-active-high"); - - pmc_pm_data.sysclkreq_high = of_property_read_bool(np, - "nvidia,sys-clock-req-active-high"); - - pmc_pm_data.combined_req = of_property_read_bool(np, - "nvidia,combined-power-req"); - - pmc_pm_data.cpu_pwr_good_en = of_property_read_bool(np, - "nvidia,cpu-pwr-good-en"); - - if (of_property_read_u32_array(np, "nvidia,lp0-vec", lp0_vec, - ARRAY_SIZE(lp0_vec))) - if (suspend_mode == TEGRA_SUSPEND_LP0) - suspend_mode = TEGRA_SUSPEND_LP1; - - pmc_pm_data.lp0_vec_phy_addr = lp0_vec[0]; - pmc_pm_data.lp0_vec_size = lp0_vec[1]; - - pmc_pm_data.suspend_mode = suspend_mode; -} diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h deleted file mode 100644 index 59e19c344298..000000000000 --- a/arch/arm/mach-tegra/pmc.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - */ - -#ifndef __MACH_TEGRA_PMC_H -#define __MACH_TEGRA_PMC_H - -#include <linux/reboot.h> - -enum tegra_suspend_mode { - TEGRA_SUSPEND_NONE = 0, - TEGRA_SUSPEND_LP2, /* CPU voltage off */ - TEGRA_SUSPEND_LP1, /* CPU voltage off, DRAM self-refresh */ - TEGRA_SUSPEND_LP0, /* CPU + core voltage off, DRAM self-refresh */ - TEGRA_MAX_SUSPEND_MODE, -}; - -#ifdef CONFIG_PM_SLEEP -enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void); -void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode); -void tegra_pmc_suspend(void); -void tegra_pmc_resume(void); -void tegra_pmc_pm_set(enum tegra_suspend_mode mode); -void tegra_pmc_suspend_init(void); -#endif - -bool tegra_pmc_cpu_is_powered(int cpuid); -int tegra_pmc_cpu_power_on(int cpuid); -int tegra_pmc_cpu_remove_clamping(int cpuid); - -void tegra_pmc_restart(enum reboot_mode mode, const char *cmd); - -void tegra_pmc_init_irq(void); -void tegra_pmc_init(void); - -#endif diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c deleted file mode 100644 index 0a14b8638437..000000000000 --- a/arch/arm/mach-tegra/powergate.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - * drivers/powergate/tegra-powergate.c - * - * Copyright (c) 2010 Google, Inc - * - * Author: - * Colin Cross <ccross@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clk.h> -#include <linux/clk/tegra.h> -#include <linux/debugfs.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/export.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/reset.h> -#include <linux/seq_file.h> -#include <linux/spinlock.h> - -#include <soc/tegra/fuse.h> -#include <soc/tegra/powergate.h> - -#include "iomap.h" - -#define DPD_SAMPLE 0x020 -#define DPD_SAMPLE_ENABLE (1 << 0) -#define DPD_SAMPLE_DISABLE (0 << 0) - -#define PWRGATE_TOGGLE 0x30 -#define PWRGATE_TOGGLE_START (1 << 8) - -#define REMOVE_CLAMPING 0x34 - -#define PWRGATE_STATUS 0x38 - -#define IO_DPD_REQ 0x1b8 -#define IO_DPD_REQ_CODE_IDLE (0 << 30) -#define IO_DPD_REQ_CODE_OFF (1 << 30) -#define IO_DPD_REQ_CODE_ON (2 << 30) -#define IO_DPD_REQ_CODE_MASK (3 << 30) - -#define IO_DPD_STATUS 0x1bc -#define IO_DPD2_REQ 0x1c0 -#define IO_DPD2_STATUS 0x1c4 -#define SEL_DPD_TIM 0x1c8 - -#define GPU_RG_CNTRL 0x2d4 - -static int tegra_num_powerdomains; -static int tegra_num_cpu_domains; -static const u8 *tegra_cpu_domains; - -static const u8 tegra30_cpu_domains[] = { - TEGRA_POWERGATE_CPU, - TEGRA_POWERGATE_CPU1, - TEGRA_POWERGATE_CPU2, - TEGRA_POWERGATE_CPU3, -}; - -static const u8 tegra114_cpu_domains[] = { - TEGRA_POWERGATE_CPU0, - TEGRA_POWERGATE_CPU1, - TEGRA_POWERGATE_CPU2, - TEGRA_POWERGATE_CPU3, -}; - -static const u8 tegra124_cpu_domains[] = { - TEGRA_POWERGATE_CPU0, - TEGRA_POWERGATE_CPU1, - TEGRA_POWERGATE_CPU2, - TEGRA_POWERGATE_CPU3, -}; - -static DEFINE_SPINLOCK(tegra_powergate_lock); - -static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); - -static u32 pmc_read(unsigned long reg) -{ - return readl(pmc + reg); -} - -static void pmc_write(u32 val, unsigned long reg) -{ - writel(val, pmc + reg); -} - -static int tegra_powergate_set(int id, bool new_state) -{ - bool status; - unsigned long flags; - - spin_lock_irqsave(&tegra_powergate_lock, flags); - - status = pmc_read(PWRGATE_STATUS) & (1 << id); - - if (status == new_state) { - spin_unlock_irqrestore(&tegra_powergate_lock, flags); - return 0; - } - - pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE); - - spin_unlock_irqrestore(&tegra_powergate_lock, flags); - - return 0; -} - -int tegra_powergate_power_on(int id) -{ - if (id < 0 || id >= tegra_num_powerdomains) - return -EINVAL; - - return tegra_powergate_set(id, true); -} - -int tegra_powergate_power_off(int id) -{ - if (id < 0 || id >= tegra_num_powerdomains) - return -EINVAL; - - return tegra_powergate_set(id, false); -} -EXPORT_SYMBOL(tegra_powergate_power_off); - -int tegra_powergate_is_powered(int id) -{ - u32 status; - - if (id < 0 || id >= tegra_num_powerdomains) - return -EINVAL; - - status = pmc_read(PWRGATE_STATUS) & (1 << id); - return !!status; -} - -int tegra_powergate_remove_clamping(int id) -{ - u32 mask; - - if (id < 0 || id >= tegra_num_powerdomains) - return -EINVAL; - - /* - * The Tegra124 GPU has a separate register (with different semantics) - * to remove clamps. - */ - if (tegra_get_chip_id() == TEGRA124) { - if (id == TEGRA_POWERGATE_3D) { - pmc_write(0, GPU_RG_CNTRL); - return 0; - } - } - - /* - * Tegra 2 has a bug where PCIE and VDE clamping masks are - * swapped relatively to the partition ids - */ - if (id == TEGRA_POWERGATE_VDEC) - mask = (1 << TEGRA_POWERGATE_PCIE); - else if (id == TEGRA_POWERGATE_PCIE) - mask = (1 << TEGRA_POWERGATE_VDEC); - else - mask = (1 << id); - - pmc_write(mask, REMOVE_CLAMPING); - - return 0; -} -EXPORT_SYMBOL(tegra_powergate_remove_clamping); - -/* Must be called with clk disabled, and returns with clk enabled */ -int tegra_powergate_sequence_power_up(int id, struct clk *clk, - struct reset_control *rst) -{ - int ret; - - reset_control_assert(rst); - - ret = tegra_powergate_power_on(id); - if (ret) - goto err_power; - - ret = clk_prepare_enable(clk); - if (ret) - goto err_clk; - - udelay(10); - - ret = tegra_powergate_remove_clamping(id); - if (ret) - goto err_clamp; - - udelay(10); - reset_control_deassert(rst); - - return 0; - -err_clamp: - clk_disable_unprepare(clk); -err_clk: - tegra_powergate_power_off(id); -err_power: - return ret; -} -EXPORT_SYMBOL(tegra_powergate_sequence_power_up); - -int tegra_cpu_powergate_id(int cpuid) -{ - if (cpuid > 0 && cpuid < tegra_num_cpu_domains) - return tegra_cpu_domains[cpuid]; - - return -EINVAL; -} - -int __init tegra_powergate_init(void) -{ - switch (tegra_get_chip_id()) { - case TEGRA20: - tegra_num_powerdomains = 7; - break; - case TEGRA30: - tegra_num_powerdomains = 14; - tegra_num_cpu_domains = 4; - tegra_cpu_domains = tegra30_cpu_domains; - break; - case TEGRA114: - tegra_num_powerdomains = 23; - tegra_num_cpu_domains = 4; - tegra_cpu_domains = tegra114_cpu_domains; - break; - case TEGRA124: - tegra_num_powerdomains = 25; - tegra_num_cpu_domains = 4; - tegra_cpu_domains = tegra124_cpu_domains; - break; - default: - /* Unknown Tegra variant. Disable powergating */ - tegra_num_powerdomains = 0; - break; - } - - return 0; -} - -#ifdef CONFIG_DEBUG_FS - -static const char * const *powergate_name; - -static const char * const powergate_name_t20[] = { - [TEGRA_POWERGATE_CPU] = "cpu", - [TEGRA_POWERGATE_3D] = "3d", - [TEGRA_POWERGATE_VENC] = "venc", - [TEGRA_POWERGATE_VDEC] = "vdec", - [TEGRA_POWERGATE_PCIE] = "pcie", - [TEGRA_POWERGATE_L2] = "l2", - [TEGRA_POWERGATE_MPE] = "mpe", -}; - -static const char * const powergate_name_t30[] = { - [TEGRA_POWERGATE_CPU] = "cpu0", - [TEGRA_POWERGATE_3D] = "3d0", - [TEGRA_POWERGATE_VENC] = "venc", - [TEGRA_POWERGATE_VDEC] = "vdec", - [TEGRA_POWERGATE_PCIE] = "pcie", - [TEGRA_POWERGATE_L2] = "l2", - [TEGRA_POWERGATE_MPE] = "mpe", - [TEGRA_POWERGATE_HEG] = "heg", - [TEGRA_POWERGATE_SATA] = "sata", - [TEGRA_POWERGATE_CPU1] = "cpu1", - [TEGRA_POWERGATE_CPU2] = "cpu2", - [TEGRA_POWERGATE_CPU3] = "cpu3", - [TEGRA_POWERGATE_CELP] = "celp", - [TEGRA_POWERGATE_3D1] = "3d1", -}; - -static const char * const powergate_name_t114[] = { - [TEGRA_POWERGATE_CPU] = "crail", - [TEGRA_POWERGATE_3D] = "3d", - [TEGRA_POWERGATE_VENC] = "venc", - [TEGRA_POWERGATE_VDEC] = "vdec", - [TEGRA_POWERGATE_MPE] = "mpe", - [TEGRA_POWERGATE_HEG] = "heg", - [TEGRA_POWERGATE_CPU1] = "cpu1", - [TEGRA_POWERGATE_CPU2] = "cpu2", - [TEGRA_POWERGATE_CPU3] = "cpu3", - [TEGRA_POWERGATE_CELP] = "celp", - [TEGRA_POWERGATE_CPU0] = "cpu0", - [TEGRA_POWERGATE_C0NC] = "c0nc", - [TEGRA_POWERGATE_C1NC] = "c1nc", - [TEGRA_POWERGATE_DIS] = "dis", - [TEGRA_POWERGATE_DISB] = "disb", - [TEGRA_POWERGATE_XUSBA] = "xusba", - [TEGRA_POWERGATE_XUSBB] = "xusbb", - [TEGRA_POWERGATE_XUSBC] = "xusbc", -}; - -static const char * const powergate_name_t124[] = { - [TEGRA_POWERGATE_CPU] = "crail", - [TEGRA_POWERGATE_3D] = "3d", - [TEGRA_POWERGATE_VENC] = "venc", - [TEGRA_POWERGATE_PCIE] = "pcie", - [TEGRA_POWERGATE_VDEC] = "vdec", - [TEGRA_POWERGATE_L2] = "l2", - [TEGRA_POWERGATE_MPE] = "mpe", - [TEGRA_POWERGATE_HEG] = "heg", - [TEGRA_POWERGATE_SATA] = "sata", - [TEGRA_POWERGATE_CPU1] = "cpu1", - [TEGRA_POWERGATE_CPU2] = "cpu2", - [TEGRA_POWERGATE_CPU3] = "cpu3", - [TEGRA_POWERGATE_CELP] = "celp", - [TEGRA_POWERGATE_CPU0] = "cpu0", - [TEGRA_POWERGATE_C0NC] = "c0nc", - [TEGRA_POWERGATE_C1NC] = "c1nc", - [TEGRA_POWERGATE_SOR] = "sor", - [TEGRA_POWERGATE_DIS] = "dis", - [TEGRA_POWERGATE_DISB] = "disb", - [TEGRA_POWERGATE_XUSBA] = "xusba", - [TEGRA_POWERGATE_XUSBB] = "xusbb", - [TEGRA_POWERGATE_XUSBC] = "xusbc", - [TEGRA_POWERGATE_VIC] = "vic", - [TEGRA_POWERGATE_IRAM] = "iram", -}; - -static int powergate_show(struct seq_file *s, void *data) -{ - int i; - - seq_printf(s, " powergate powered\n"); - seq_printf(s, "------------------\n"); - - for (i = 0; i < tegra_num_powerdomains; i++) { - if (!powergate_name[i]) - continue; - - seq_printf(s, " %9s %7s\n", powergate_name[i], - tegra_powergate_is_powered(i) ? "yes" : "no"); - } - - return 0; -} - -static int powergate_open(struct inode *inode, struct file *file) -{ - return single_open(file, powergate_show, inode->i_private); -} - -static const struct file_operations powergate_fops = { - .open = powergate_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -int __init tegra_powergate_debugfs_init(void) -{ - struct dentry *d; - - switch (tegra_get_chip_id()) { - case TEGRA20: - powergate_name = powergate_name_t20; - break; - case TEGRA30: - powergate_name = powergate_name_t30; - break; - case TEGRA114: - powergate_name = powergate_name_t114; - break; - case TEGRA124: - powergate_name = powergate_name_t124; - break; - } - - if (powergate_name) { - d = debugfs_create_file("powergate", S_IRUGO, NULL, NULL, - &powergate_fops); - if (!d) - return -ENOMEM; - } - - return 0; -} - -#endif - -static int tegra_io_rail_prepare(int id, unsigned long *request, - unsigned long *status, unsigned int *bit) -{ - unsigned long rate, value; - struct clk *clk; - - *bit = id % 32; - - /* - * There are two sets of 30 bits to select IO rails, but bits 30 and - * 31 are control bits rather than IO rail selection bits. - */ - if (id > 63 || *bit == 30 || *bit == 31) - return -EINVAL; - - if (id < 32) { - *status = IO_DPD_STATUS; - *request = IO_DPD_REQ; - } else { - *status = IO_DPD2_STATUS; - *request = IO_DPD2_REQ; - } - - clk = clk_get_sys(NULL, "pclk"); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - rate = clk_get_rate(clk); - clk_put(clk); - - pmc_write(DPD_SAMPLE_ENABLE, DPD_SAMPLE); - - /* must be at least 200 ns, in APB (PCLK) clock cycles */ - value = DIV_ROUND_UP(1000000000, rate); - value = DIV_ROUND_UP(200, value); - pmc_write(value, SEL_DPD_TIM); - - return 0; -} - -static int tegra_io_rail_poll(unsigned long offset, unsigned long mask, - unsigned long val, unsigned long timeout) -{ - unsigned long value; - - timeout = jiffies + msecs_to_jiffies(timeout); - - while (time_after(timeout, jiffies)) { - value = pmc_read(offset); - if ((value & mask) == val) - return 0; - - usleep_range(250, 1000); - } - - return -ETIMEDOUT; -} - -static void tegra_io_rail_unprepare(void) -{ - pmc_write(DPD_SAMPLE_DISABLE, DPD_SAMPLE); -} - -int tegra_io_rail_power_on(int id) -{ - unsigned long request, status, value; - unsigned int bit, mask; - int err; - - err = tegra_io_rail_prepare(id, &request, &status, &bit); - if (err < 0) - return err; - - mask = 1 << bit; - - value = pmc_read(request); - value |= mask; - value &= ~IO_DPD_REQ_CODE_MASK; - value |= IO_DPD_REQ_CODE_OFF; - pmc_write(value, request); - - err = tegra_io_rail_poll(status, mask, 0, 250); - if (err < 0) - return err; - - tegra_io_rail_unprepare(); - - return 0; -} -EXPORT_SYMBOL(tegra_io_rail_power_on); - -int tegra_io_rail_power_off(int id) -{ - unsigned long request, status, value; - unsigned int bit, mask; - int err; - - err = tegra_io_rail_prepare(id, &request, &status, &bit); - if (err < 0) - return err; - - mask = 1 << bit; - - value = pmc_read(request); - value |= mask; - value &= ~IO_DPD_REQ_CODE_MASK; - value |= IO_DPD_REQ_CODE_ON; - pmc_write(value, request); - - err = tegra_io_rail_poll(status, mask, mask, 250); - if (err < 0) - return err; - - tegra_io_rail_unprepare(); - - return 0; -} -EXPORT_SYMBOL(tegra_io_rail_power_off); diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 5377495d41b8..894c5c472184 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -54,12 +54,10 @@ static void __init tegra_cpu_reset_handler_set(const u32 reset_address) * Prevent further modifications to the physical reset vector. * NOTE: Has no effect on chips prior to Tegra30. */ - if (tegra_get_chip_id() != TEGRA20) { - reg = readl(sb_ctrl); - reg |= 2; - writel(reg, sb_ctrl); - wmb(); - } + reg = readl(sb_ctrl); + reg |= 2; + writel(reg, sb_ctrl); + wmb(); } static void __init tegra_cpu_reset_handler_enable(void) diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index aaaf3abd2688..be4bc5f853f5 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -78,7 +78,7 @@ ENTRY(tegra20_hotplug_shutdown) /* Put this CPU down */ cpu_id r0 bl tegra20_cpu_shutdown - mov pc, lr @ should never get here + ret lr @ should never get here ENDPROC(tegra20_hotplug_shutdown) /* @@ -96,7 +96,7 @@ ENDPROC(tegra20_hotplug_shutdown) */ ENTRY(tegra20_cpu_shutdown) cmp r0, #0 - moveq pc, lr @ must not be called for CPU 0 + reteq lr @ must not be called for CPU 0 mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 mov r12, #CPU_RESETTABLE str r12, [r1] @@ -117,7 +117,7 @@ ENTRY(tegra20_cpu_shutdown) cpu_id r3 cmp r3, r0 beq . - mov pc, lr + ret lr ENDPROC(tegra20_cpu_shutdown) #endif @@ -164,7 +164,7 @@ ENTRY(tegra_pen_lock) cmpeq r12, r0 @ !turn == cpu? beq 1b @ while !turn == cpu && flag[!cpu] == 1 - mov pc, lr @ locked + ret lr @ locked ENDPROC(tegra_pen_lock) ENTRY(tegra_pen_unlock) @@ -176,7 +176,7 @@ ENTRY(tegra_pen_unlock) addne r2, r3, #PMC_SCRATCH39 mov r12, #0 str r12, [r2] - mov pc, lr + ret lr ENDPROC(tegra_pen_unlock) /* @@ -189,7 +189,7 @@ ENTRY(tegra20_cpu_clear_resettable) mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 mov r12, #CPU_NOT_RESETTABLE str r12, [r1] - mov pc, lr + ret lr ENDPROC(tegra20_cpu_clear_resettable) /* @@ -202,7 +202,7 @@ ENTRY(tegra20_cpu_set_resettable_soon) mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 mov r12, #CPU_RESETTABLE_SOON str r12, [r1] - mov pc, lr + ret lr ENDPROC(tegra20_cpu_set_resettable_soon) /* @@ -217,7 +217,7 @@ ENTRY(tegra20_cpu_is_resettable_soon) cmp r12, #CPU_RESETTABLE_SOON moveq r0, #1 movne r0, #0 - mov pc, lr + ret lr ENDPROC(tegra20_cpu_is_resettable_soon) /* @@ -239,7 +239,7 @@ ENTRY(tegra20_sleep_core_finish) mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA add r0, r0, r1 - mov pc, r3 + ret r3 ENDPROC(tegra20_sleep_core_finish) /* @@ -402,7 +402,7 @@ exit_selfrefresh_loop: mov32 r0, TEGRA_PMC_BASE ldr r0, [r0, #PMC_SCRATCH41] - mov pc, r0 @ jump to tegra_resume + ret r0 @ jump to tegra_resume ENDPROC(tegra20_lp1_reset) /* @@ -455,7 +455,7 @@ tegra20_switch_cpu_to_clk32k: mov r0, #0 /* brust policy = 32KHz */ str r0, [r5, #CLK_RESET_SCLK_BURST] - mov pc, lr + ret lr /* * tegra20_enter_sleep @@ -535,7 +535,7 @@ padsave_done: adr r2, tegra20_sclk_save str r0, [r2] dsb - mov pc, lr + ret lr tegra20_sdram_pad_address: .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 8ea699b8e3cb..5d8d13aeab93 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -143,7 +143,7 @@ ENTRY(tegra30_hotplug_shutdown) /* Powergate this CPU */ mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN bl tegra30_cpu_shutdown - mov pc, lr @ should never get here + ret lr @ should never get here ENDPROC(tegra30_hotplug_shutdown) /* @@ -162,7 +162,7 @@ ENTRY(tegra30_cpu_shutdown) bne _no_cpu0_chk @ It's not Tegra30 cmp r3, #0 - moveq pc, lr @ Must never be called for CPU 0 + reteq lr @ Must never be called for CPU 0 _no_cpu0_chk: ldr r12, =TEGRA_FLOW_CTRL_VIRT @@ -267,7 +267,7 @@ ENTRY(tegra30_sleep_core_finish) mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA add r0, r0, r1 - mov pc, r3 + ret r3 ENDPROC(tegra30_sleep_core_finish) /* @@ -286,7 +286,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish) mov r0, #0 @ power mode flags (!hotplug) bl tegra30_cpu_shutdown mov r0, #1 @ never return here - mov pc, r7 + ret r7 ENDPROC(tegra30_sleep_cpu_secondary_finish) /* @@ -530,7 +530,7 @@ __no_dual_emc_chanl: mov32 r0, TEGRA_PMC_BASE ldr r0, [r0, #PMC_SCRATCH41] - mov pc, r0 @ jump to tegra_resume + ret r0 @ jump to tegra_resume ENDPROC(tegra30_lp1_reset) .align L1_CACHE_SHIFT @@ -660,7 +660,7 @@ _no_pll_in_iddq: mov r0, #0 /* brust policy = 32KHz */ str r0, [r5, #CLK_RESET_SCLK_BURST] - mov pc, lr + ret lr /* * tegra30_enter_sleep @@ -820,7 +820,7 @@ pmc_io_dpd_skip: dsb - mov pc, lr + ret lr .ltorg /* dummy symbol for end of IRAM */ diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 8d06213fbc47..f024a5109e8e 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -87,7 +87,7 @@ ENTRY(tegra_init_l2_for_a15) mcrne p15, 0x1, r0, c9, c0, 2 _exit_init_l2_a15: - mov pc, lr + ret lr ENDPROC(tegra_init_l2_for_a15) /* @@ -111,7 +111,7 @@ ENTRY(tegra_sleep_cpu_finish) add r3, r3, r0 mov r0, r1 - mov pc, r3 + ret r3 ENDPROC(tegra_sleep_cpu_finish) /* @@ -139,7 +139,7 @@ ENTRY(tegra_shut_off_mmu) moveq r3, #0 streq r3, [r2, #L2X0_CTRL] #endif - mov pc, r0 + ret r0 ENDPROC(tegra_shut_off_mmu) .popsection @@ -156,6 +156,6 @@ ENTRY(tegra_switch_cpu_to_pllp) str r0, [r5, #CLK_RESET_CCLK_BURST] mov r0, #0 str r0, [r5, #CLK_RESET_CCLK_DIVIDER] - mov pc, lr + ret lr ENDPROC(tegra_switch_cpu_to_pllp) #endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 339fe42cd6fb..92d46ec1361a 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -130,9 +130,6 @@ void tegra_disable_clean_inv_dcache(u32 flag); #ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_shutdown(void); void tegra30_hotplug_shutdown(void); -void tegra_hotplug_init(void); -#else -static inline void tegra_hotplug_init(void) {} #endif void tegra20_cpu_shutdown(int cpu); diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 6ccbc8ca1db5..5ef5173dec83 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -36,6 +36,7 @@ #include <linux/usb/tegra_usb_phy.h> #include <soc/tegra/fuse.h> +#include <soc/tegra/pmc.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -49,7 +50,6 @@ #include "cpuidle.h" #include "iomap.h" #include "irq.h" -#include "pmc.h" #include "pm.h" #include "reset.h" #include "sleep.h" @@ -73,15 +73,11 @@ u32 tegra_uart_config[3] = { static void __init tegra_init_early(void) { of_register_trusted_foundations(); - tegra_init_fuse(); tegra_cpu_reset_handler_init(); - tegra_powergate_init(); - tegra_hotplug_init(); } static void __init tegra_dt_init_irq(void) { - tegra_pmc_init_irq(); tegra_init_irq(); irqchip_init(); tegra_legacy_irq_syscore_init(); @@ -93,8 +89,6 @@ static void __init tegra_dt_init(void) struct soc_device *soc_dev; struct device *parent = NULL; - tegra_pmc_init(); - tegra_clocks_apply_init_table(); soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); @@ -144,7 +138,6 @@ static void __init tegra_dt_init_late(void) tegra_init_suspend(); tegra_cpuidle_init(); - tegra_powergate_debugfs_init(); for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) { if (of_machine_is_compatible(board_init_funcs[i].machine)) { diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index a4e139aa2441..32d744e91ec2 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -796,7 +796,7 @@ static struct ab8500_regulator_reg_init ab8505_reg_init[] = { INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), }; -struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { +static struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8505_LDO_AUX1] = { .constraints = { diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 842ebedbdd1c..e97ee556f92f 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -7,17 +7,15 @@ #include <linux/io.h> #include <linux/of.h> -#include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include "db8500-regs.h" #include "id.h" -static void __iomem *l2x0_base; - static int __init ux500_l2x0_unlock(void) { int i; + void __iomem *l2x0_base = __io_address(U8500_L2CC_BASE); /* * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions @@ -45,23 +43,15 @@ static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) static int __init ux500_l2x0_init(void) { - if (cpu_is_u8500_family() || cpu_is_ux540_family()) - l2x0_base = __io_address(U8500_L2CC_BASE); - else - /* Non-Ux500 platform */ + /* Multiplatform guard */ + if (!((cpu_is_u8500_family() || cpu_is_ux540_family()))) return -ENODEV; /* Unlock before init */ ux500_l2x0_unlock(); - outer_cache.write_sec = ux500_l2c310_write_sec; - - if (of_have_populated_dt()) - l2x0_of_init(0, ~0); - else - l2x0_init(l2x0_base, 0, ~0); + l2x0_of_init(0, ~0); return 0; } - early_initcall(ux500_l2x0_init); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index fa308f07fae5..6f63954c8bde 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -33,11 +33,11 @@ #include "db8500-regs.h" #include "id.h" -struct ab8500_platform_data ab8500_platdata = { +static struct ab8500_platform_data ab8500_platdata = { .regulator = &ab8500_regulator_plat_data, }; -struct prcmu_pdata db8500_prcmu_pdata = { +static struct prcmu_pdata db8500_prcmu_pdata = { .ab_platdata = &ab8500_platdata, .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, @@ -82,7 +82,7 @@ static struct map_desc u9540_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K), }; -void __init u8500_map_io(void) +static void __init u8500_map_io(void) { /* * Map the UARTs early so that the DEBUG_LL stuff continues to work. @@ -119,7 +119,7 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) return ret; } -struct arm_pmu_platdata db8500_pmu_platdata = { +static struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index db16b5a04ad5..dbb2970ee7da 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -125,7 +125,7 @@ static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr, soc_dev_attr->revision = ux500_get_revision(); } -struct device_attribute ux500_soc_attr = +static const struct device_attribute ux500_soc_attr = __ATTR(process, S_IRUGO, ux500_get_process, NULL); struct device * __init ux500_soc_device_init(const char *soc_id) diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 87efda0aa348..ff28d8ad1ed7 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -16,7 +16,7 @@ #include "db8500-regs.h" #include "id.h" -const static struct of_device_id prcmu_timer_of_match[] __initconst = { +static const struct of_device_id prcmu_timer_of_match[] __initconst = { { .compatible = "stericsson,db8500-prcmu-timer-4", }, { }, }; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index be83ba25f81b..08fb8c89f414 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,6 +28,7 @@ #include <linux/of_platform.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <linux/platform_data/video-clcd-versatile.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> @@ -53,7 +54,6 @@ #include <mach/platform.h> #include <asm/hardware/timer-sp.h> -#include <plat/clcd.h> #include <plat/sched_clock.h> #include "core.h" diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 3621b000a0f6..9f9bc61ca64b 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -44,7 +44,6 @@ static const char *versatile_dt_match[] __initconst = { DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") .map_io = versatile_map_io, .init_early = versatile_init_early, - .init_irq = versatile_init_irq, .init_machine = versatile_dt_init, .dt_compat = versatile_dt_match, .restart = versatile_restart, diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index d8b9330f896a..b2cfba16c4e8 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -13,7 +13,6 @@ menuconfig ARCH_VEXPRESS select ICST select NO_IOPORT_MAP select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD select POWER_RESET select POWER_RESET_VEXPRESS select POWER_SUPPLY @@ -64,7 +63,6 @@ config ARCH_VEXPRESS_DCSCB config ARCH_VEXPRESS_SPC bool "Versatile Express Serial Power Controller (SPC)" - select ARCH_HAS_OPP select PM_OPP help The TC2 (A15x2 A7x3) versatile express core tile integrates a logic diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 86150d7a2e7d..27bea049380a 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -8,6 +8,7 @@ #include <linux/platform_device.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> +#include <linux/platform_data/video-clcd-versatile.h> #include <linux/clkdev.h> #include <linux/vexpress.h> #include <linux/irqchip/arm-gic.h> @@ -29,8 +30,6 @@ #include <mach/motherboard.h> #include <mach/irqs.h> -#include <plat/clcd.h> - static struct map_desc ct_ca9x4_io_desc[] __initdata = { { .virtual = V2T_PERIPH, diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index b743a0ae02ce..2fb78b4648cb 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -152,7 +152,7 @@ static void tc2_pm_down(u64 residency) if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { arch_spin_unlock(&tc2_pm_lock); - if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) { + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { /* * On the Cortex-A15 we need to disable * L2 prefetching before flushing the cache. @@ -323,6 +323,21 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) " b cci_enable_port_for_self "); } +static void __init tc2_cache_off(void) +{ + pr_info("TC2: disabling cache during MCPM loopback test\n"); + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { + /* disable L2 prefetching on the Cortex-A15 */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3 \n\t" + "isb \n\t" + "dsb " + : : "r" (0x400) ); + } + v7_exit_coherency_flush(all); + cci_disable_port_by_cpu(read_cpuid_mpidr()); +} + static int __init tc2_pm_init(void) { int ret, irq; @@ -370,6 +385,8 @@ static int __init tc2_pm_init(void) ret = mcpm_platform_register(&tc2_pm_power_ops); if (!ret) { mcpm_sync_init(tc2_pm_power_up_setup); + /* test if we can (re)enable the CCI on our own */ + BUG_ON(mcpm_loopback(tc2_cache_off) != 0); pr_info("TC2 power management initialized\n"); } return ret; diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 4a73464cb11b..2da7be31e7e2 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -44,7 +44,7 @@ static void __iomem *pmc_base; -void vt8500_restart(enum reboot_mode mode, const char *cmd) +static void vt8500_restart(enum reboot_mode mode, const char *cmd) { if (pmc_base) writel(1, pmc_base + VT8500_PMSR_REG); @@ -60,7 +60,7 @@ static struct map_desc vt8500_io_desc[] __initdata = { }, }; -void __init vt8500_map_io(void) +static void __init vt8500_map_io(void) { iotable_init(vt8500_io_desc, ARRAY_SIZE(vt8500_io_desc)); } @@ -72,7 +72,7 @@ static void vt8500_power_off(void) asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0)); } -void __init vt8500_init(void) +static void __init vt8500_init(void) { struct device_node *np; #if defined(CONFIG_FB_VT8500) || defined(CONFIG_FB_WM8505) diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 0c164f81e72d..aaa5162c1509 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,6 +1,5 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 - select ARCH_HAS_OPP select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c348eaee7ee2..ae69809a9e47 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -669,7 +669,7 @@ config ARM_VIRT_EXT details. config SWP_EMULATE - bool "Emulate SWP/SWPB instructions" + bool "Emulate SWP/SWPB instructions" if !SMP depends on CPU_V7 default y if SMP select HAVE_PROC_CPU if PROC_FS @@ -854,7 +854,7 @@ config OUTER_CACHE_SYNC config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" - depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU + depends on ARCH_MV78XX0 || ARCH_MVEBU default y select OUTER_CACHE help @@ -907,8 +907,8 @@ config PL310_ERRATA_588369 They are architecturally defined to behave as the execution of a clean operation followed immediately by an invalidate operation, both performing to the same memory location. This functionality - is not correctly implemented in PL310 as clean lines are not - invalidated as a result of these operations. + is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0) + as clean lines are not invalidated as a result of these operations. config PL310_ERRATA_727915 bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" @@ -918,7 +918,8 @@ config PL310_ERRATA_727915 PL310 can handle normal accesses while it is in progress. Under very rare circumstances, due to this erratum, write data can be lost when PL310 treats a cacheable write transaction during a Clean & - Invalidate by Way operation. + Invalidate by Way operation. Revisions prior to r3p1 are affected by + this errata (fixed in r3p1). config PL310_ERRATA_753970 bool "PL310 errata: cache sync operation may be faulty" diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b8cb1a2688a0..0c1ab49e5f7b 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -76,6 +76,7 @@ static unsigned long ai_user; static unsigned long ai_sys; +static void *ai_sys_last_pc; static unsigned long ai_skipped; static unsigned long ai_half; static unsigned long ai_word; @@ -130,7 +131,7 @@ static const char *usermode_action[] = { static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); - seq_printf(m, "System:\t\t%lu\n", ai_sys); + seq_printf(m, "System:\t\t%lu (%pF)\n", ai_sys, ai_sys_last_pc); seq_printf(m, "Skipped:\t%lu\n", ai_skipped); seq_printf(m, "Half:\t\t%lu\n", ai_half); seq_printf(m, "Word:\t\t%lu\n", ai_word); @@ -794,6 +795,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) goto user; ai_sys += 1; + ai_sys_last_pc = (void *)instruction_pointer(regs); fixup: diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S index e505befe51b5..2f0c58836ae7 100644 --- a/arch/arm/mm/cache-fa.S +++ b/arch/arm/mm/cache-fa.S @@ -15,6 +15,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include <asm/memory.h> #include <asm/page.h> @@ -45,7 +46,7 @@ ENTRY(fa_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(fa_flush_icache_all) /* @@ -71,7 +72,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -99,7 +100,7 @@ ENTRY(fa_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -135,7 +136,7 @@ ENTRY(fa_coherent_user_range) mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -155,7 +156,7 @@ ENTRY(fa_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -181,7 +182,7 @@ fa_dma_inv_range: blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -199,7 +200,7 @@ fa_dma_clean_range: blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_flush_range(start,end) @@ -214,7 +215,7 @@ ENTRY(fa_dma_flush_range) blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -237,7 +238,7 @@ ENDPROC(fa_dma_map_area) * - dir - DMA direction */ ENTRY(fa_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(fa_dma_unmap_area) .globl fa_flush_kern_cache_louis diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 7c3fb41a462e..5f2c988a06ac 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -665,7 +665,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) { unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; - bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; + bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9; if (rev >= L310_CACHE_ID_RTL_R2P0) { if (cortex_a9) { diff --git a/arch/arm/mm/cache-nop.S b/arch/arm/mm/cache-nop.S index 8e12ddca0031..f1cc9861031f 100644 --- a/arch/arm/mm/cache-nop.S +++ b/arch/arm/mm/cache-nop.S @@ -5,11 +5,12 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include "proc-macros.S" ENTRY(nop_flush_icache_all) - mov pc, lr + ret lr ENDPROC(nop_flush_icache_all) .globl nop_flush_kern_cache_all @@ -29,7 +30,7 @@ ENDPROC(nop_flush_icache_all) ENTRY(nop_coherent_user_range) mov r0, 0 - mov pc, lr + ret lr ENDPROC(nop_coherent_user_range) .globl nop_flush_kern_dcache_area diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index a7ba68f59f0c..91e3adf155cb 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -9,6 +9,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include <asm/page.h> #include "proc-macros.S" @@ -18,7 +19,7 @@ * Unconditionally clean and invalidate the entire icache. */ ENTRY(v4_flush_icache_all) - mov pc, lr + ret lr ENDPROC(v4_flush_icache_all) /* @@ -40,7 +41,7 @@ ENTRY(v4_flush_kern_cache_all) #ifdef CONFIG_CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache - mov pc, lr + ret lr #else /* FALLTHROUGH */ #endif @@ -59,7 +60,7 @@ ENTRY(v4_flush_user_cache_range) #ifdef CONFIG_CPU_CP15 mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ flush ID cache - mov pc, lr + ret lr #else /* FALLTHROUGH */ #endif @@ -89,7 +90,7 @@ ENTRY(v4_coherent_kern_range) */ ENTRY(v4_coherent_user_range) mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -116,7 +117,7 @@ ENTRY(v4_dma_flush_range) mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache #endif - mov pc, lr + ret lr /* * dma_unmap_area(start, size, dir) @@ -136,7 +137,7 @@ ENTRY(v4_dma_unmap_area) * - dir - DMA direction */ ENTRY(v4_dma_map_area) - mov pc, lr + ret lr ENDPROC(v4_dma_unmap_area) ENDPROC(v4_dma_map_area) diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index cd4945321407..2522f8c8fbb1 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -9,6 +9,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include <asm/memory.h> #include <asm/page.h> #include "proc-macros.S" @@ -58,7 +59,7 @@ flush_base: ENTRY(v4wb_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(v4wb_flush_icache_all) /* @@ -94,7 +95,7 @@ __flush_whole_cache: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -122,7 +123,7 @@ ENTRY(v4wb_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -170,7 +171,7 @@ ENTRY(v4wb_coherent_user_range) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* @@ -195,7 +196,7 @@ v4wb_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -212,7 +213,7 @@ v4wb_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -248,7 +249,7 @@ ENDPROC(v4wb_dma_map_area) * - dir - DMA direction */ ENTRY(v4wb_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(v4wb_dma_unmap_area) .globl v4wb_flush_kern_cache_louis diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 11e5e5838bc5..a0982ce49007 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -13,6 +13,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include <asm/page.h> #include "proc-macros.S" @@ -48,7 +49,7 @@ ENTRY(v4wt_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(v4wt_flush_icache_all) /* @@ -71,7 +72,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -94,7 +95,7 @@ ENTRY(v4wt_flush_user_cache_range) add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -126,7 +127,7 @@ ENTRY(v4wt_coherent_user_range) cmp r0, r1 blo 1b mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -160,7 +161,7 @@ v4wt_dma_inv_range: add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -192,7 +193,7 @@ ENTRY(v4wt_dma_unmap_area) * - dir - DMA direction */ ENTRY(v4wt_dma_map_area) - mov pc, lr + ret lr ENDPROC(v4wt_dma_unmap_area) ENDPROC(v4wt_dma_map_area) diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index d8fd4d4bd3d4..24659952c278 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -51,7 +51,7 @@ ENTRY(v6_flush_icache_all) #else mcr p15, 0, r0, c7, c5, 0 @ invalidate I-cache #endif - mov pc, lr + ret lr ENDPROC(v6_flush_icache_all) /* @@ -73,7 +73,7 @@ ENTRY(v6_flush_kern_cache_all) #else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif - mov pc, lr + ret lr /* * v6_flush_cache_all() @@ -98,7 +98,7 @@ ENTRY(v6_flush_user_cache_all) * - we have a VIPT cache. */ ENTRY(v6_flush_user_cache_range) - mov pc, lr + ret lr /* * v6_coherent_kern_range(start,end) @@ -150,7 +150,7 @@ ENTRY(v6_coherent_user_range) #else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif - mov pc, lr + ret lr /* * Fault handling for the cache operation above. If the virtual address in r0 @@ -158,7 +158,7 @@ ENTRY(v6_coherent_user_range) */ 9001: mov r0, #-EFAULT - mov pc, lr + ret lr UNWIND(.fnend ) ENDPROC(v6_coherent_user_range) ENDPROC(v6_coherent_kern_range) @@ -188,7 +188,7 @@ ENTRY(v6_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 #endif - mov pc, lr + ret lr /* @@ -239,7 +239,7 @@ v6_dma_inv_range: blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * v6_dma_clean_range(start,end) @@ -262,7 +262,7 @@ v6_dma_clean_range: blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * v6_dma_flush_range(start,end) @@ -290,7 +290,7 @@ ENTRY(v6_dma_flush_range) blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -323,7 +323,7 @@ ENTRY(v6_dma_unmap_area) teq r2, #DMA_TO_DEVICE bne v6_dma_inv_range #endif - mov pc, lr + ret lr ENDPROC(v6_dma_unmap_area) .globl v6_flush_kern_cache_louis diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 615c99e38ba1..b966656d2c2d 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -61,7 +61,7 @@ ENTRY(v7_invalidate_l1) bgt 1b dsb st isb - mov pc, lr + ret lr ENDPROC(v7_invalidate_l1) /* @@ -76,7 +76,7 @@ ENTRY(v7_flush_icache_all) mov r0, #0 ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate - mov pc, lr + ret lr ENDPROC(v7_flush_icache_all) /* @@ -94,7 +94,7 @@ ENTRY(v7_flush_dcache_louis) ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr #ifdef CONFIG_ARM_ERRATA_643719 ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register - ALT_UP(moveq pc, lr) @ LoUU is zero, so nothing to do + ALT_UP(reteq lr) @ LoUU is zero, so nothing to do ldreq r1, =0x410fc090 @ ID of ARM Cortex A9 r0p? biceq r2, r2, #0x0000000f @ clear minor revision number teqeq r2, r1 @ test for errata affected core and if so... @@ -102,7 +102,7 @@ ENTRY(v7_flush_dcache_louis) #endif ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 - moveq pc, lr @ return if level == 0 + reteq lr @ return if level == 0 mov r10, #0 @ r10 (starting level) = 0 b flush_levels @ start flushing cache levels ENDPROC(v7_flush_dcache_louis) @@ -168,7 +168,7 @@ finished: mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr dsb st isb - mov pc, lr + ret lr ENDPROC(v7_flush_dcache_all) /* @@ -191,7 +191,7 @@ ENTRY(v7_flush_kern_cache_all) ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) - mov pc, lr + ret lr ENDPROC(v7_flush_kern_cache_all) /* @@ -209,7 +209,7 @@ ENTRY(v7_flush_kern_cache_louis) ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) - mov pc, lr + ret lr ENDPROC(v7_flush_kern_cache_louis) /* @@ -235,7 +235,7 @@ ENTRY(v7_flush_user_cache_all) * - we have a VIPT cache. */ ENTRY(v7_flush_user_cache_range) - mov pc, lr + ret lr ENDPROC(v7_flush_user_cache_all) ENDPROC(v7_flush_user_cache_range) @@ -296,7 +296,7 @@ ENTRY(v7_coherent_user_range) ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB dsb ishst isb - mov pc, lr + ret lr /* * Fault handling for the cache operation above. If the virtual address in r0 @@ -307,7 +307,7 @@ ENTRY(v7_coherent_user_range) dsb #endif mov r0, #-EFAULT - mov pc, lr + ret lr UNWIND(.fnend ) ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) @@ -336,7 +336,7 @@ ENTRY(v7_flush_kern_dcache_area) cmp r0, r1 blo 1b dsb st - mov pc, lr + ret lr ENDPROC(v7_flush_kern_dcache_area) /* @@ -369,7 +369,7 @@ v7_dma_inv_range: cmp r0, r1 blo 1b dsb st - mov pc, lr + ret lr ENDPROC(v7_dma_inv_range) /* @@ -391,7 +391,7 @@ v7_dma_clean_range: cmp r0, r1 blo 1b dsb st - mov pc, lr + ret lr ENDPROC(v7_dma_clean_range) /* @@ -413,7 +413,7 @@ ENTRY(v7_dma_flush_range) cmp r0, r1 blo 1b dsb st - mov pc, lr + ret lr ENDPROC(v7_dma_flush_range) /* @@ -439,7 +439,7 @@ ENTRY(v7_dma_unmap_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE bne v7_dma_inv_range - mov pc, lr + ret lr ENDPROC(v7_dma_unmap_area) __INITDATA diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4c88935654ca..7a996aaa061e 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -26,6 +26,7 @@ #include <linux/io.h> #include <linux/vmalloc.h> #include <linux/sizes.h> +#include <linux/cma.h> #include <asm/memory.h> #include <asm/highmem.h> @@ -461,12 +462,21 @@ void __init dma_contiguous_remap(void) map.type = MT_MEMORY_DMA_READY; /* - * Clear previous low-memory mapping + * Clear previous low-memory mapping to ensure that the + * TLB does not see any conflicting entries, then flush + * the TLB of the old entries before creating new mappings. + * + * This ensures that any speculatively loaded TLB entries + * (even though they may be rare) can not cause any problems, + * and ensures that this code is architecturally compliant. */ for (addr = __phys_to_virt(start); addr < __phys_to_virt(end); addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); + flush_tlb_kernel_range(__phys_to_virt(start), + __phys_to_virt(end)); + iotable_init(&map, 1); } } diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c index c508f41a43bc..59424937e52b 100644 --- a/arch/arm/mm/dump.c +++ b/arch/arm/mm/dump.c @@ -126,8 +126,8 @@ static const struct prot_bits section_bits[] = { .val = PMD_SECT_USER, .set = "USR", }, { - .mask = PMD_SECT_RDONLY, - .val = PMD_SECT_RDONLY, + .mask = L_PMD_SECT_RDONLY, + .val = L_PMD_SECT_RDONLY, .set = "ro", .clear = "RW", #elif __LINUX_ARM_ARCH__ >= 6 diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 8e0e52eb76b5..c447ec70e868 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -9,6 +9,11 @@ #include <asm/sections.h> #include <asm/system_info.h> +/* + * Note: accesses outside of the kernel image and the identity map area + * are not supported on any CPU using the idmap tables as its current + * page tables. + */ pgd_t *idmap_pgd; phys_addr_t (*arch_virt_to_idmap) (unsigned long x); @@ -25,6 +30,13 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end, pr_warning("Failed to allocate identity pmd.\n"); return; } + /* + * Copy the original PMD to ensure that the PMD entries for + * the kernel image are preserved. + */ + if (!pud_none(*pud)) + memcpy(pmd, pmd_offset(pud, 0), + PTRS_PER_PMD * sizeof(pmd_t)); pud_populate(&init_mm, pud, pmd); pmd += pmd_index(addr); } else diff --git a/arch/arm/mm/l2c-l2x0-resume.S b/arch/arm/mm/l2c-l2x0-resume.S index 99b05f21a59a..fda415e4ca8f 100644 --- a/arch/arm/mm/l2c-l2x0-resume.S +++ b/arch/arm/mm/l2c-l2x0-resume.S @@ -6,6 +6,7 @@ * This code can only be used to if you are running in the secure world. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/hardware/cache-l2x0.h> .text @@ -27,7 +28,7 @@ ENTRY(l2c310_early_resume) @ Check that the address has been initialised teq r1, #0 - moveq pc, lr + reteq lr @ The prefetch and power control registers are revision dependent @ and can be written whether or not the L2 cache is enabled @@ -41,7 +42,7 @@ ENTRY(l2c310_early_resume) @ Don't setup the L2 cache if it is already enabled ldr r0, [r1, #L2X0_CTRL] tst r0, #L2X0_CTRL_EN - movne pc, lr + retne lr str r3, [r1, #L310_TAG_LATENCY_CTRL] str r4, [r1, #L310_DATA_LATENCY_CTRL] @@ -51,7 +52,7 @@ ENTRY(l2c310_early_resume) str r2, [r1, #L2X0_AUX_CTRL] mov r9, #L2X0_CTRL_EN str r9, [r1, #L2X0_CTRL] - mov pc, lr + ret lr ENDPROC(l2c310_early_resume) .align diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ab14b79b03f0..8348ed6b2efe 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1406,8 +1406,8 @@ void __init early_paging_init(const struct machine_desc *mdesc, return; /* remap kernel code and data */ - map_start = init_mm.start_code; - map_end = init_mm.brk; + map_start = init_mm.start_code & PMD_MASK; + map_end = ALIGN(init_mm.brk, PMD_SIZE); /* get a handle on things... */ pgd0 = pgd_offset_k(0); @@ -1434,23 +1434,64 @@ void __init early_paging_init(const struct machine_desc *mdesc, dsb(ishst); isb(); - /* remap level 1 table */ + /* + * FIXME: This code is not architecturally compliant: we modify + * the mappings in-place, indeed while they are in use by this + * very same code. This may lead to unpredictable behaviour of + * the CPU. + * + * Even modifying the mappings in a separate page table does + * not resolve this. + * + * The architecture strongly recommends that when a mapping is + * changed, that it is changed by first going via an invalid + * mapping and back to the new mapping. This is to ensure that + * no TLB conflicts (caused by the TLB having more than one TLB + * entry match a translation) can occur. However, doing that + * here will result in unmapping the code we are running. + */ + pr_warn("WARNING: unsafe modification of in-place page tables - tainting kernel\n"); + add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK); + + /* + * Remap level 1 table. This changes the physical addresses + * used to refer to the level 2 page tables to the high + * physical address alias, leaving everything else the same. + */ for (i = 0; i < PTRS_PER_PGD; pud0++, i++) { set_pud(pud0, __pud(__pa(pmd0) | PMD_TYPE_TABLE | L_PGD_SWAPPER)); pmd0 += PTRS_PER_PMD; } - /* remap pmds for kernel mapping */ - phys = __pa(map_start) & PMD_MASK; + /* + * Remap the level 2 table, pointing the mappings at the high + * physical address alias of these pages. + */ + phys = __pa(map_start); do { *pmdk++ = __pmd(phys | pmdprot); phys += PMD_SIZE; } while (phys < map_end); + /* + * Ensure that the above updates are flushed out of the cache. + * This is not strictly correct; on a system where the caches + * are coherent with each other, but the MMU page table walks + * may not be coherent, flush_cache_all() may be a no-op, and + * this will fail. + */ flush_cache_all(); + + /* + * Re-write the TTBR values to point them at the high physical + * alias of the page tables. We expect __va() will work on + * cpu_get_pgd(), which returns the value of TTBR0. + */ cpu_switch_mm(pgd0, &init_mm); cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET); + + /* Finally flush any stale TLB values. */ local_flush_bp_all(); local_flush_tlb_all(); } diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index d1a2d05971e0..86ee5d47ce3c 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -73,7 +73,7 @@ * cpu_arm1020_proc_init() */ ENTRY(cpu_arm1020_proc_init) - mov pc, lr + ret lr /* * cpu_arm1020_proc_fin() @@ -83,7 +83,7 @@ ENTRY(cpu_arm1020_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1020_reset(loc) @@ -107,7 +107,7 @@ ENTRY(cpu_arm1020_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1020_reset) .popsection @@ -117,7 +117,7 @@ ENDPROC(cpu_arm1020_reset) .align 5 ENTRY(cpu_arm1020_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -133,7 +133,7 @@ ENTRY(arm1020_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1020_flush_icache_all) /* @@ -169,7 +169,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -200,7 +200,7 @@ ENTRY(arm1020_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -242,7 +242,7 @@ ENTRY(arm1020_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -264,7 +264,7 @@ ENTRY(arm1020_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -297,7 +297,7 @@ arm1020_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -320,7 +320,7 @@ arm1020_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -342,7 +342,7 @@ ENTRY(arm1020_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -365,7 +365,7 @@ ENDPROC(arm1020_dma_map_area) * - dir - DMA direction */ ENTRY(arm1020_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1020_dma_unmap_area) .globl arm1020_flush_kern_cache_louis @@ -384,7 +384,7 @@ ENTRY(cpu_arm1020_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -423,7 +423,7 @@ ENTRY(cpu_arm1020_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif /* CONFIG_MMU */ - mov pc, lr + ret lr /* * cpu_arm1020_set_pte(ptep, pte) @@ -441,7 +441,7 @@ ENTRY(cpu_arm1020_set_pte_ext) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ - mov pc, lr + ret lr .type __arm1020_setup, #function __arm1020_setup: @@ -460,7 +460,7 @@ __arm1020_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif - mov pc, lr + ret lr .size __arm1020_setup, . - __arm1020_setup /* diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 9d89405c3d03..a6331d78601f 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -73,7 +73,7 @@ * cpu_arm1020e_proc_init() */ ENTRY(cpu_arm1020e_proc_init) - mov pc, lr + ret lr /* * cpu_arm1020e_proc_fin() @@ -83,7 +83,7 @@ ENTRY(cpu_arm1020e_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1020e_reset(loc) @@ -107,7 +107,7 @@ ENTRY(cpu_arm1020e_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1020e_reset) .popsection @@ -117,7 +117,7 @@ ENDPROC(cpu_arm1020e_reset) .align 5 ENTRY(cpu_arm1020e_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -133,7 +133,7 @@ ENTRY(arm1020e_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1020e_flush_icache_all) /* @@ -168,7 +168,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -197,7 +197,7 @@ ENTRY(arm1020e_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -236,7 +236,7 @@ ENTRY(arm1020e_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -257,7 +257,7 @@ ENTRY(arm1020e_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -286,7 +286,7 @@ arm1020e_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -308,7 +308,7 @@ arm1020e_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -328,7 +328,7 @@ ENTRY(arm1020e_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -351,7 +351,7 @@ ENDPROC(arm1020e_dma_map_area) * - dir - DMA direction */ ENTRY(arm1020e_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1020e_dma_unmap_area) .globl arm1020e_flush_kern_cache_louis @@ -369,7 +369,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -407,7 +407,7 @@ ENTRY(cpu_arm1020e_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm1020e_set_pte(ptep, pte) @@ -423,7 +423,7 @@ ENTRY(cpu_arm1020e_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif #endif /* CONFIG_MMU */ - mov pc, lr + ret lr .type __arm1020e_setup, #function __arm1020e_setup: @@ -441,7 +441,7 @@ __arm1020e_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif - mov pc, lr + ret lr .size __arm1020e_setup, . - __arm1020e_setup /* diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 6f01a0ae3b30..a126b7a59928 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -62,7 +62,7 @@ * cpu_arm1022_proc_init() */ ENTRY(cpu_arm1022_proc_init) - mov pc, lr + ret lr /* * cpu_arm1022_proc_fin() @@ -72,7 +72,7 @@ ENTRY(cpu_arm1022_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1022_reset(loc) @@ -96,7 +96,7 @@ ENTRY(cpu_arm1022_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1022_reset) .popsection @@ -106,7 +106,7 @@ ENDPROC(cpu_arm1022_reset) .align 5 ENTRY(cpu_arm1022_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -122,7 +122,7 @@ ENTRY(arm1022_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1022_flush_icache_all) /* @@ -156,7 +156,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -185,7 +185,7 @@ ENTRY(arm1022_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -225,7 +225,7 @@ ENTRY(arm1022_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -246,7 +246,7 @@ ENTRY(arm1022_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -275,7 +275,7 @@ arm1022_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -297,7 +297,7 @@ arm1022_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -317,7 +317,7 @@ ENTRY(arm1022_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -340,7 +340,7 @@ ENDPROC(arm1022_dma_map_area) * - dir - DMA direction */ ENTRY(arm1022_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1022_dma_unmap_area) .globl arm1022_flush_kern_cache_louis @@ -358,7 +358,7 @@ ENTRY(cpu_arm1022_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -389,7 +389,7 @@ ENTRY(cpu_arm1022_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm1022_set_pte_ext(ptep, pte, ext) @@ -405,7 +405,7 @@ ENTRY(cpu_arm1022_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif #endif /* CONFIG_MMU */ - mov pc, lr + ret lr .type __arm1022_setup, #function __arm1022_setup: @@ -423,7 +423,7 @@ __arm1022_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.............. #endif - mov pc, lr + ret lr .size __arm1022_setup, . - __arm1022_setup /* diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 4799a24b43e6..fc294067e977 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -62,7 +62,7 @@ * cpu_arm1026_proc_init() */ ENTRY(cpu_arm1026_proc_init) - mov pc, lr + ret lr /* * cpu_arm1026_proc_fin() @@ -72,7 +72,7 @@ ENTRY(cpu_arm1026_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1026_reset(loc) @@ -96,7 +96,7 @@ ENTRY(cpu_arm1026_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1026_reset) .popsection @@ -106,7 +106,7 @@ ENDPROC(cpu_arm1026_reset) .align 5 ENTRY(cpu_arm1026_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -122,7 +122,7 @@ ENTRY(arm1026_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1026_flush_icache_all) /* @@ -151,7 +151,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -180,7 +180,7 @@ ENTRY(arm1026_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -219,7 +219,7 @@ ENTRY(arm1026_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -240,7 +240,7 @@ ENTRY(arm1026_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -269,7 +269,7 @@ arm1026_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -291,7 +291,7 @@ arm1026_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -311,7 +311,7 @@ ENTRY(arm1026_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -334,7 +334,7 @@ ENDPROC(arm1026_dma_map_area) * - dir - DMA direction */ ENTRY(arm1026_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1026_dma_unmap_area) .globl arm1026_flush_kern_cache_louis @@ -352,7 +352,7 @@ ENTRY(cpu_arm1026_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -378,7 +378,7 @@ ENTRY(cpu_arm1026_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm1026_set_pte_ext(ptep, pte, ext) @@ -394,7 +394,7 @@ ENTRY(cpu_arm1026_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif #endif /* CONFIG_MMU */ - mov pc, lr + ret lr .type __arm1026_setup, #function __arm1026_setup: @@ -417,7 +417,7 @@ __arm1026_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif - mov pc, lr + ret lr .size __arm1026_setup, . - __arm1026_setup /* diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index d42c37f9f5bc..2baa66b3ac9b 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -51,14 +51,14 @@ */ ENTRY(cpu_arm720_dcache_clean_area) ENTRY(cpu_arm720_proc_init) - mov pc, lr + ret lr ENTRY(cpu_arm720_proc_fin) mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * Function: arm720_proc_do_idle(void) @@ -66,7 +66,7 @@ ENTRY(cpu_arm720_proc_fin) * Purpose : put the processor in proper idle mode */ ENTRY(cpu_arm720_do_idle) - mov pc, lr + ret lr /* * Function: arm720_switch_mm(unsigned long pgd_phys) @@ -81,7 +81,7 @@ ENTRY(cpu_arm720_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ update page table ptr mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4) #endif - mov pc, lr + ret lr /* * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) @@ -94,7 +94,7 @@ ENTRY(cpu_arm720_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext wc_disable=0 #endif - mov pc, lr + ret lr /* * Function: arm720_reset @@ -112,7 +112,7 @@ ENTRY(cpu_arm720_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x2100 @ ..v....s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm720_reset) .popsection @@ -128,7 +128,7 @@ __arm710_setup: bic r0, r0, r5 ldr r5, arm710_cr1_set orr r0, r0, r5 - mov pc, lr @ __ret (head.S) + ret lr @ __ret (head.S) .size __arm710_setup, . - __arm710_setup /* @@ -156,7 +156,7 @@ __arm720_setup: mrc p15, 0, r0, c1, c0 @ get control register bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr @ __ret (head.S) + ret lr @ __ret (head.S) .size __arm720_setup, . - __arm720_setup /* diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 9b0ae90cbf17..ac1ea6b3bce4 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -32,7 +32,7 @@ ENTRY(cpu_arm740_proc_init) ENTRY(cpu_arm740_do_idle) ENTRY(cpu_arm740_dcache_clean_area) ENTRY(cpu_arm740_switch_mm) - mov pc, lr + ret lr /* * cpu_arm740_proc_fin() @@ -42,7 +42,7 @@ ENTRY(cpu_arm740_proc_fin) bic r0, r0, #0x3f000000 @ bank/f/lock/s bic r0, r0, #0x0000000c @ w-buffer/cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm740_reset(loc) @@ -56,7 +56,7 @@ ENTRY(cpu_arm740_reset) mrc p15, 0, ip, c1, c0, 0 @ get ctrl register bic ip, ip, #0x0000000c @ ............wc.. mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm740_reset) .popsection @@ -115,7 +115,7 @@ __arm740_setup: @ need some benchmark orr r0, r0, #0x0000000d @ MPU/Cache/WB - mov pc, lr + ret lr .size __arm740_setup, . - __arm740_setup diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index f6cc3f63ce39..bf6ba4bc30ff 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -32,13 +32,13 @@ ENTRY(cpu_arm7tdmi_proc_init) ENTRY(cpu_arm7tdmi_do_idle) ENTRY(cpu_arm7tdmi_dcache_clean_area) ENTRY(cpu_arm7tdmi_switch_mm) - mov pc, lr + ret lr /* * cpu_arm7tdmi_proc_fin() */ ENTRY(cpu_arm7tdmi_proc_fin) - mov pc, lr + ret lr /* * Function: cpu_arm7tdmi_reset(loc) @@ -47,13 +47,13 @@ ENTRY(cpu_arm7tdmi_proc_fin) */ .pushsection .idmap.text, "ax" ENTRY(cpu_arm7tdmi_reset) - mov pc, r0 + ret r0 ENDPROC(cpu_arm7tdmi_reset) .popsection .type __arm7tdmi_setup, #function __arm7tdmi_setup: - mov pc, lr + ret lr .size __arm7tdmi_setup, . - __arm7tdmi_setup __INITDATA diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 549557df6d57..22bf8dde4f84 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -63,7 +63,7 @@ * cpu_arm920_proc_init() */ ENTRY(cpu_arm920_proc_init) - mov pc, lr + ret lr /* * cpu_arm920_proc_fin() @@ -73,7 +73,7 @@ ENTRY(cpu_arm920_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm920_reset(loc) @@ -97,7 +97,7 @@ ENTRY(cpu_arm920_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm920_reset) .popsection @@ -107,7 +107,7 @@ ENDPROC(cpu_arm920_reset) .align 5 ENTRY(cpu_arm920_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -120,7 +120,7 @@ ENTRY(cpu_arm920_do_idle) ENTRY(arm920_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm920_flush_icache_all) /* @@ -151,7 +151,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -177,7 +177,7 @@ ENTRY(arm920_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -211,7 +211,7 @@ ENTRY(arm920_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -231,7 +231,7 @@ ENTRY(arm920_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -257,7 +257,7 @@ arm920_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -276,7 +276,7 @@ arm920_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -293,7 +293,7 @@ ENTRY(arm920_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -316,7 +316,7 @@ ENDPROC(arm920_dma_map_area) * - dir - DMA direction */ ENTRY(arm920_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm920_dma_unmap_area) .globl arm920_flush_kern_cache_louis @@ -332,7 +332,7 @@ ENTRY(cpu_arm920_dcache_clean_area) add r0, r0, #CACHE_DLINESIZE subs r1, r1, #CACHE_DLINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -367,7 +367,7 @@ ENTRY(cpu_arm920_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm920_set_pte(ptep, pte, ext) @@ -382,7 +382,7 @@ ENTRY(cpu_arm920_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size @@ -423,7 +423,7 @@ __arm920_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __arm920_setup, . - __arm920_setup /* diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 2a758b06c6f6..0c6d5ac5a6d4 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -65,7 +65,7 @@ * cpu_arm922_proc_init() */ ENTRY(cpu_arm922_proc_init) - mov pc, lr + ret lr /* * cpu_arm922_proc_fin() @@ -75,7 +75,7 @@ ENTRY(cpu_arm922_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm922_reset(loc) @@ -99,7 +99,7 @@ ENTRY(cpu_arm922_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm922_reset) .popsection @@ -109,7 +109,7 @@ ENDPROC(cpu_arm922_reset) .align 5 ENTRY(cpu_arm922_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -122,7 +122,7 @@ ENTRY(cpu_arm922_do_idle) ENTRY(arm922_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm922_flush_icache_all) /* @@ -153,7 +153,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -179,7 +179,7 @@ ENTRY(arm922_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -213,7 +213,7 @@ ENTRY(arm922_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -233,7 +233,7 @@ ENTRY(arm922_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -259,7 +259,7 @@ arm922_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -278,7 +278,7 @@ arm922_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -295,7 +295,7 @@ ENTRY(arm922_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -318,7 +318,7 @@ ENDPROC(arm922_dma_map_area) * - dir - DMA direction */ ENTRY(arm922_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm922_dma_unmap_area) .globl arm922_flush_kern_cache_louis @@ -336,7 +336,7 @@ ENTRY(cpu_arm922_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -371,7 +371,7 @@ ENTRY(cpu_arm922_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm922_set_pte_ext(ptep, pte, ext) @@ -386,7 +386,7 @@ ENTRY(cpu_arm922_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ - mov pc, lr + ret lr .type __arm922_setup, #function __arm922_setup: @@ -401,7 +401,7 @@ __arm922_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __arm922_setup, . - __arm922_setup /* diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index ba0d58e1a2a2..c32d073282ea 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -86,7 +86,7 @@ * cpu_arm925_proc_init() */ ENTRY(cpu_arm925_proc_init) - mov pc, lr + ret lr /* * cpu_arm925_proc_fin() @@ -96,7 +96,7 @@ ENTRY(cpu_arm925_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm925_reset(loc) @@ -129,7 +129,7 @@ ENDPROC(cpu_arm925_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 /* * cpu_arm925_do_idle() @@ -145,7 +145,7 @@ ENTRY(cpu_arm925_do_idle) mcr p15, 0, r2, c1, c0, 0 @ Disable I cache mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable - mov pc, lr + ret lr /* * flush_icache_all() @@ -155,7 +155,7 @@ ENTRY(cpu_arm925_do_idle) ENTRY(arm925_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm925_flush_icache_all) /* @@ -188,7 +188,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -225,7 +225,7 @@ ENTRY(arm925_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -259,7 +259,7 @@ ENTRY(arm925_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -279,7 +279,7 @@ ENTRY(arm925_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -307,7 +307,7 @@ arm925_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -328,7 +328,7 @@ arm925_dma_clean_range: blo 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -350,7 +350,7 @@ ENTRY(arm925_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -373,7 +373,7 @@ ENDPROC(arm925_dma_map_area) * - dir - DMA direction */ ENTRY(arm925_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm925_dma_unmap_area) .globl arm925_flush_kern_cache_louis @@ -390,7 +390,7 @@ ENTRY(cpu_arm925_dcache_clean_area) bhi 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -419,7 +419,7 @@ ENTRY(cpu_arm925_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm925_set_pte_ext(ptep, pte, ext) @@ -436,7 +436,7 @@ ENTRY(cpu_arm925_set_pte_ext) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ - mov pc, lr + ret lr .type __arm925_setup, #function __arm925_setup: @@ -469,7 +469,7 @@ __arm925_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .1.. .... .... .... #endif - mov pc, lr + ret lr .size __arm925_setup, . - __arm925_setup /* diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 0f098f407c9f..252b2503038d 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -55,7 +55,7 @@ * cpu_arm926_proc_init() */ ENTRY(cpu_arm926_proc_init) - mov pc, lr + ret lr /* * cpu_arm926_proc_fin() @@ -65,7 +65,7 @@ ENTRY(cpu_arm926_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm926_reset(loc) @@ -89,7 +89,7 @@ ENTRY(cpu_arm926_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm926_reset) .popsection @@ -111,7 +111,7 @@ ENTRY(cpu_arm926_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable msr cpsr_c, r3 @ Restore FIQ state - mov pc, lr + ret lr /* * flush_icache_all() @@ -121,7 +121,7 @@ ENTRY(cpu_arm926_do_idle) ENTRY(arm926_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm926_flush_icache_all) /* @@ -151,7 +151,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -188,7 +188,7 @@ ENTRY(arm926_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -222,7 +222,7 @@ ENTRY(arm926_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -242,7 +242,7 @@ ENTRY(arm926_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -270,7 +270,7 @@ arm926_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -291,7 +291,7 @@ arm926_dma_clean_range: blo 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -313,7 +313,7 @@ ENTRY(arm926_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -336,7 +336,7 @@ ENDPROC(arm926_dma_map_area) * - dir - DMA direction */ ENTRY(arm926_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm926_dma_unmap_area) .globl arm926_flush_kern_cache_louis @@ -353,7 +353,7 @@ ENTRY(cpu_arm926_dcache_clean_area) bhi 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -380,7 +380,7 @@ ENTRY(cpu_arm926_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm926_set_pte_ext(ptep, pte, ext) @@ -397,7 +397,7 @@ ENTRY(cpu_arm926_set_pte_ext) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size @@ -448,7 +448,7 @@ __arm926_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .1.. .... .... .... #endif - mov pc, lr + ret lr .size __arm926_setup, . - __arm926_setup /* diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 1c39a704ff6e..e5212d489377 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -31,7 +31,7 @@ */ ENTRY(cpu_arm940_proc_init) ENTRY(cpu_arm940_switch_mm) - mov pc, lr + ret lr /* * cpu_arm940_proc_fin() @@ -41,7 +41,7 @@ ENTRY(cpu_arm940_proc_fin) bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm940_reset(loc) @@ -58,7 +58,7 @@ ENTRY(cpu_arm940_reset) bic ip, ip, #0x00000005 @ .............c.p bic ip, ip, #0x00001000 @ i-cache mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm940_reset) .popsection @@ -68,7 +68,7 @@ ENDPROC(cpu_arm940_reset) .align 5 ENTRY(cpu_arm940_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* * flush_icache_all() @@ -78,7 +78,7 @@ ENTRY(cpu_arm940_do_idle) ENTRY(arm940_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm940_flush_icache_all) /* @@ -122,7 +122,7 @@ ENTRY(arm940_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -170,7 +170,7 @@ ENTRY(arm940_flush_kern_dcache_area) bcs 1b @ segments 7 to 0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -191,7 +191,7 @@ arm940_dma_inv_range: subs r1, r1, #1 << 4 bcs 1b @ segments 7 to 0 mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -215,7 +215,7 @@ ENTRY(cpu_arm940_dcache_clean_area) bcs 1b @ segments 7 to 0 #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -241,7 +241,7 @@ ENTRY(arm940_dma_flush_range) subs r1, r1, #1 << 4 bcs 1b @ segments 7 to 0 mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -264,7 +264,7 @@ ENDPROC(arm940_dma_map_area) * - dir - DMA direction */ ENTRY(arm940_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm940_dma_unmap_area) .globl arm940_flush_kern_cache_louis @@ -337,7 +337,7 @@ __arm940_setup: orr r0, r0, #0x00001000 @ I-cache orr r0, r0, #0x00000005 @ MPU/D-cache - mov pc, lr + ret lr .size __arm940_setup, . - __arm940_setup diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 0289cd905e73..b3dd9b2d0b8e 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -38,7 +38,7 @@ */ ENTRY(cpu_arm946_proc_init) ENTRY(cpu_arm946_switch_mm) - mov pc, lr + ret lr /* * cpu_arm946_proc_fin() @@ -48,7 +48,7 @@ ENTRY(cpu_arm946_proc_fin) bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm946_reset(loc) @@ -65,7 +65,7 @@ ENTRY(cpu_arm946_reset) bic ip, ip, #0x00000005 @ .............c.p bic ip, ip, #0x00001000 @ i-cache mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm946_reset) .popsection @@ -75,7 +75,7 @@ ENDPROC(cpu_arm946_reset) .align 5 ENTRY(cpu_arm946_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* * flush_icache_all() @@ -85,7 +85,7 @@ ENTRY(cpu_arm946_do_idle) ENTRY(arm946_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm946_flush_icache_all) /* @@ -117,7 +117,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ flush I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -156,7 +156,7 @@ ENTRY(arm946_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -191,7 +191,7 @@ ENTRY(arm946_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -212,7 +212,7 @@ ENTRY(arm946_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -239,7 +239,7 @@ arm946_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -260,7 +260,7 @@ arm946_dma_clean_range: blo 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -284,7 +284,7 @@ ENTRY(arm946_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -307,7 +307,7 @@ ENDPROC(arm946_dma_map_area) * - dir - DMA direction */ ENTRY(arm946_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm946_dma_unmap_area) .globl arm946_flush_kern_cache_louis @@ -324,7 +324,7 @@ ENTRY(cpu_arm946_dcache_clean_area) bhi 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .type __arm946_setup, #function __arm946_setup: @@ -392,7 +392,7 @@ __arm946_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x00004000 @ .1.. .... .... .... #endif - mov pc, lr + ret lr .size __arm946_setup, . - __arm946_setup diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index f51197ba754a..8227322bbb8f 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -32,13 +32,13 @@ ENTRY(cpu_arm9tdmi_proc_init) ENTRY(cpu_arm9tdmi_do_idle) ENTRY(cpu_arm9tdmi_dcache_clean_area) ENTRY(cpu_arm9tdmi_switch_mm) - mov pc, lr + ret lr /* * cpu_arm9tdmi_proc_fin() */ ENTRY(cpu_arm9tdmi_proc_fin) - mov pc, lr + ret lr /* * Function: cpu_arm9tdmi_reset(loc) @@ -47,13 +47,13 @@ ENTRY(cpu_arm9tdmi_proc_fin) */ .pushsection .idmap.text, "ax" ENTRY(cpu_arm9tdmi_reset) - mov pc, r0 + ret r0 ENDPROC(cpu_arm9tdmi_reset) .popsection .type __arm9tdmi_setup, #function __arm9tdmi_setup: - mov pc, lr + ret lr .size __arm9tdmi_setup, . - __arm9tdmi_setup __INITDATA diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 2dfc0f1d3bfd..c494886892ba 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -32,7 +32,7 @@ * cpu_fa526_proc_init() */ ENTRY(cpu_fa526_proc_init) - mov pc, lr + ret lr /* * cpu_fa526_proc_fin() @@ -44,7 +44,7 @@ ENTRY(cpu_fa526_proc_fin) mcr p15, 0, r0, c1, c0, 0 @ disable caches nop nop - mov pc, lr + ret lr /* * cpu_fa526_reset(loc) @@ -72,7 +72,7 @@ ENTRY(cpu_fa526_reset) mcr p15, 0, ip, c1, c0, 0 @ ctrl register nop nop - mov pc, r0 + ret r0 ENDPROC(cpu_fa526_reset) .popsection @@ -81,7 +81,7 @@ ENDPROC(cpu_fa526_reset) */ .align 4 ENTRY(cpu_fa526_do_idle) - mov pc, lr + ret lr ENTRY(cpu_fa526_dcache_clean_area) @@ -90,7 +90,7 @@ ENTRY(cpu_fa526_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -117,7 +117,7 @@ ENTRY(cpu_fa526_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB #endif - mov pc, lr + ret lr /* * cpu_fa526_set_pte_ext(ptep, pte, ext) @@ -133,7 +133,7 @@ ENTRY(cpu_fa526_set_pte_ext) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr .type __fa526_setup, #function __fa526_setup: @@ -162,7 +162,7 @@ __fa526_setup: bic r0, r0, r5 ldr r5, fa526_cr1_set orr r0, r0, r5 - mov pc, lr + ret lr .size __fa526_setup, . - __fa526_setup /* diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index db79b62c92fb..03a1b75f2e16 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -69,7 +69,7 @@ ENTRY(cpu_feroceon_proc_init) movne r2, r2, lsr #2 @ turned into # of sets sub r2, r2, #(1 << 5) stmia r1, {r2, r3} - mov pc, lr + ret lr /* * cpu_feroceon_proc_fin() @@ -86,7 +86,7 @@ ENTRY(cpu_feroceon_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_feroceon_reset(loc) @@ -110,7 +110,7 @@ ENTRY(cpu_feroceon_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_feroceon_reset) .popsection @@ -124,7 +124,7 @@ ENTRY(cpu_feroceon_do_idle) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* * flush_icache_all() @@ -134,7 +134,7 @@ ENTRY(cpu_feroceon_do_idle) ENTRY(feroceon_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(feroceon_flush_icache_all) /* @@ -169,7 +169,7 @@ __flush_whole_cache: mov ip, #0 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -198,7 +198,7 @@ ENTRY(feroceon_flush_user_cache_range) tst r2, #VM_EXEC mov ip, #0 mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -233,7 +233,7 @@ ENTRY(feroceon_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -254,7 +254,7 @@ ENTRY(feroceon_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .align 5 ENTRY(feroceon_range_flush_kern_dcache_area) @@ -268,7 +268,7 @@ ENTRY(feroceon_range_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -295,7 +295,7 @@ feroceon_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .align 5 feroceon_range_dma_inv_range: @@ -311,7 +311,7 @@ feroceon_range_dma_inv_range: mcr p15, 5, r0, c15, c14, 0 @ D inv range start mcr p15, 5, r1, c15, c14, 1 @ D inv range top msr cpsr_c, r2 @ restore interrupts - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -331,7 +331,7 @@ feroceon_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .align 5 feroceon_range_dma_clean_range: @@ -344,7 +344,7 @@ feroceon_range_dma_clean_range: mcr p15, 5, r1, c15, c13, 1 @ D clean range top msr cpsr_c, r2 @ restore interrupts mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -362,7 +362,7 @@ ENTRY(feroceon_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .align 5 ENTRY(feroceon_range_dma_flush_range) @@ -375,7 +375,7 @@ ENTRY(feroceon_range_dma_flush_range) mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top msr cpsr_c, r2 @ restore interrupts mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -412,7 +412,7 @@ ENDPROC(feroceon_range_dma_map_area) * - dir - DMA direction */ ENTRY(feroceon_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(feroceon_dma_unmap_area) .globl feroceon_flush_kern_cache_louis @@ -461,7 +461,7 @@ ENTRY(cpu_feroceon_dcache_clean_area) bhi 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -490,9 +490,9 @@ ENTRY(cpu_feroceon_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs - mov pc, r2 + ret r2 #else - mov pc, lr + ret lr #endif /* @@ -512,7 +512,7 @@ ENTRY(cpu_feroceon_set_pte_ext) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr /* Suspend/resume support: taken from arch/arm/mm/proc-arm926.S */ .globl cpu_feroceon_suspend_size @@ -554,7 +554,7 @@ __feroceon_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __feroceon_setup, . - __feroceon_setup /* diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 40acba595731..53d393455f13 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -45,7 +45,7 @@ * cpu_mohawk_proc_init() */ ENTRY(cpu_mohawk_proc_init) - mov pc, lr + ret lr /* * cpu_mohawk_proc_fin() @@ -55,7 +55,7 @@ ENTRY(cpu_mohawk_proc_fin) bic r0, r0, #0x1800 @ ...iz........... bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_mohawk_reset(loc) @@ -79,7 +79,7 @@ ENTRY(cpu_mohawk_reset) bic ip, ip, #0x0007 @ .............cam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_mohawk_reset) .popsection @@ -93,7 +93,7 @@ ENTRY(cpu_mohawk_do_idle) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt - mov pc, lr + ret lr /* * flush_icache_all() @@ -103,7 +103,7 @@ ENTRY(cpu_mohawk_do_idle) ENTRY(mohawk_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(mohawk_flush_icache_all) /* @@ -128,7 +128,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -158,7 +158,7 @@ ENTRY(mohawk_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -194,7 +194,7 @@ ENTRY(mohawk_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -214,7 +214,7 @@ ENTRY(mohawk_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -240,7 +240,7 @@ mohawk_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -259,7 +259,7 @@ mohawk_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -277,7 +277,7 @@ ENTRY(mohawk_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -300,7 +300,7 @@ ENDPROC(mohawk_dma_map_area) * - dir - DMA direction */ ENTRY(mohawk_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(mohawk_dma_unmap_area) .globl mohawk_flush_kern_cache_louis @@ -315,7 +315,7 @@ ENTRY(cpu_mohawk_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * cpu_mohawk_switch_mm(pgd) @@ -333,7 +333,7 @@ ENTRY(cpu_mohawk_switch_mm) orr r0, r0, #0x18 @ cache the page table in L2 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs - mov pc, lr + ret lr /* * cpu_mohawk_set_pte_ext(ptep, pte, ext) @@ -346,7 +346,7 @@ ENTRY(cpu_mohawk_set_pte_ext) mov r0, r0 mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .globl cpu_mohawk_suspend_size .equ cpu_mohawk_suspend_size, 4 * 6 @@ -400,7 +400,7 @@ __mohawk_setup: mrc p15, 0, r0, c1, c0 @ get control register bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __mohawk_setup, . - __mohawk_setup diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index c45319c8f1d9..8008a0461cf5 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -38,7 +38,7 @@ ENTRY(cpu_sa110_proc_init) mov r0, #0 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching - mov pc, lr + ret lr /* * cpu_sa110_proc_fin() @@ -50,7 +50,7 @@ ENTRY(cpu_sa110_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_sa110_reset(loc) @@ -74,7 +74,7 @@ ENTRY(cpu_sa110_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_sa110_reset) .popsection @@ -103,7 +103,7 @@ ENTRY(cpu_sa110_do_idle) mov r0, r0 @ safety mov r0, r0 @ safety mcr p15, 0, r0, c15, c1, 2 @ enable clock switching - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -121,7 +121,7 @@ ENTRY(cpu_sa110_dcache_clean_area) add r0, r0, #DCACHELINESIZE subs r1, r1, #DCACHELINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -141,7 +141,7 @@ ENTRY(cpu_sa110_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs ldr pc, [sp], #4 #else - mov pc, lr + ret lr #endif /* @@ -157,7 +157,7 @@ ENTRY(cpu_sa110_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr .type __sa110_setup, #function __sa110_setup: @@ -173,7 +173,7 @@ __sa110_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __sa110_setup, . - __sa110_setup /* diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 09d241ae2dbe..89f97ac648a9 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -43,7 +43,7 @@ ENTRY(cpu_sa1100_proc_init) mov r0, #0 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland - mov pc, lr + ret lr /* * cpu_sa1100_proc_fin() @@ -58,7 +58,7 @@ ENTRY(cpu_sa1100_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_sa1100_reset(loc) @@ -82,7 +82,7 @@ ENTRY(cpu_sa1100_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_sa1100_reset) .popsection @@ -113,7 +113,7 @@ ENTRY(cpu_sa1100_do_idle) mcr p15, 0, r0, c15, c8, 2 @ wait for interrupt mov r0, r0 @ safety mcr p15, 0, r0, c15, c1, 2 @ enable clock switching - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -131,7 +131,7 @@ ENTRY(cpu_sa1100_dcache_clean_area) add r0, r0, #DCACHELINESIZE subs r1, r1, #DCACHELINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -152,7 +152,7 @@ ENTRY(cpu_sa1100_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs ldr pc, [sp], #4 #else - mov pc, lr + ret lr #endif /* @@ -168,7 +168,7 @@ ENTRY(cpu_sa1100_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4 * 3 @@ -211,7 +211,7 @@ __sa1100_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __sa1100_setup, . - __sa1100_setup /* diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 32b3558321c4..d0390f4b3f18 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -36,14 +36,14 @@ #define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S ENTRY(cpu_v6_proc_init) - mov pc, lr + ret lr ENTRY(cpu_v6_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_v6_reset(loc) @@ -62,7 +62,7 @@ ENTRY(cpu_v6_reset) mcr p15, 0, r1, c1, c0, 0 @ disable MMU mov r1, #0 mcr p15, 0, r1, c7, c5, 4 @ ISB - mov pc, r0 + ret r0 ENDPROC(cpu_v6_reset) .popsection @@ -77,14 +77,14 @@ ENTRY(cpu_v6_do_idle) mov r1, #0 mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt - mov pc, lr + ret lr ENTRY(cpu_v6_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #D_CACHE_LINE_SIZE subs r1, r1, #D_CACHE_LINE_SIZE bhi 1b - mov pc, lr + ret lr /* * cpu_v6_switch_mm(pgd_phys, tsk) @@ -113,7 +113,7 @@ ENTRY(cpu_v6_switch_mm) #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID #endif - mov pc, lr + ret lr /* * cpu_v6_set_pte_ext(ptep, pte, ext) @@ -131,7 +131,7 @@ ENTRY(cpu_v6_set_pte_ext) #ifdef CONFIG_MMU armv6_set_pte_ext cpu_v6 #endif - mov pc, lr + ret lr /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size @@ -241,7 +241,7 @@ __v6_setup: mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg orreq r0, r0, #(1 << 21) @ low interrupt latency configuration #endif - mov pc, lr @ return to head.S:__ret + ret lr @ return to head.S:__ret /* * V X F I D LR diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 1f52915f2b28..ed448d8a596b 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -59,7 +59,7 @@ ENTRY(cpu_v7_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 isb #endif - mov pc, lr + bx lr ENDPROC(cpu_v7_switch_mm) /* @@ -106,7 +106,7 @@ ENTRY(cpu_v7_set_pte_ext) ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif - mov pc, lr + bx lr ENDPROC(cpu_v7_set_pte_ext) /* diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 22e3ad63500c..e4c8acfc1323 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -19,6 +19,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <asm/assembler.h> #define TTB_IRGN_NC (0 << 8) #define TTB_IRGN_WBWA (1 << 8) @@ -61,7 +62,7 @@ ENTRY(cpu_v7_switch_mm) mcrr p15, 0, rpgdl, rpgdh, c2 @ set TTB 0 isb #endif - mov pc, lr + ret lr ENDPROC(cpu_v7_switch_mm) #ifdef __ARMEB__ @@ -86,13 +87,18 @@ ENTRY(cpu_v7_set_pte_ext) tst rh, #1 << (57 - 32) @ L_PTE_NONE bicne rl, #L_PTE_VALID bne 1f - tst rh, #1 << (55 - 32) @ L_PTE_DIRTY - orreq rl, #L_PTE_RDONLY + + eor ip, rh, #1 << (55 - 32) @ toggle L_PTE_DIRTY in temp reg to + @ test for !L_PTE_DIRTY || L_PTE_RDONLY + tst ip, #1 << (55 - 32) | 1 << (58 - 32) + orrne rl, #PTE_AP2 + biceq rl, #PTE_AP2 + 1: strd r2, r3, [r0] ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif - mov pc, lr + ret lr ENDPROC(cpu_v7_set_pte_ext) /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3db2c2f04a30..b5d67db20897 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -26,7 +26,7 @@ #endif ENTRY(cpu_v7_proc_init) - mov pc, lr + ret lr ENDPROC(cpu_v7_proc_init) ENTRY(cpu_v7_proc_fin) @@ -34,7 +34,7 @@ ENTRY(cpu_v7_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr ENDPROC(cpu_v7_proc_fin) /* @@ -71,20 +71,20 @@ ENDPROC(cpu_v7_reset) ENTRY(cpu_v7_do_idle) dsb @ WFI may enter a low-power mode wfi - mov pc, lr + ret lr ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) ALT_SMP(W(nop)) @ MP extensions imply L1 PTW ALT_UP_B(1f) - mov pc, lr + ret lr 1: dcache_line_size r2, r3 2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 bhi 2b dsb ishst - mov pc, lr + ret lr ENDPROC(cpu_v7_dcache_clean_area) string cpu_v7_name, "ARMv7 Processor" @@ -152,6 +152,40 @@ ENTRY(cpu_v7_do_resume) ENDPROC(cpu_v7_do_resume) #endif +/* + * Cortex-A9 processor functions + */ + globl_equ cpu_ca9mp_proc_init, cpu_v7_proc_init + globl_equ cpu_ca9mp_proc_fin, cpu_v7_proc_fin + globl_equ cpu_ca9mp_reset, cpu_v7_reset + globl_equ cpu_ca9mp_do_idle, cpu_v7_do_idle + globl_equ cpu_ca9mp_dcache_clean_area, cpu_v7_dcache_clean_area + globl_equ cpu_ca9mp_switch_mm, cpu_v7_switch_mm + globl_equ cpu_ca9mp_set_pte_ext, cpu_v7_set_pte_ext +.globl cpu_ca9mp_suspend_size +.equ cpu_ca9mp_suspend_size, cpu_v7_suspend_size + 4 * 2 +#ifdef CONFIG_ARM_CPU_SUSPEND +ENTRY(cpu_ca9mp_do_suspend) + stmfd sp!, {r4 - r5} + mrc p15, 0, r4, c15, c0, 1 @ Diagnostic register + mrc p15, 0, r5, c15, c0, 0 @ Power register + stmia r0!, {r4 - r5} + ldmfd sp!, {r4 - r5} + b cpu_v7_do_suspend +ENDPROC(cpu_ca9mp_do_suspend) + +ENTRY(cpu_ca9mp_do_resume) + ldmia r0!, {r4 - r5} + mrc p15, 0, r10, c15, c0, 1 @ Read Diagnostic register + teq r4, r10 @ Already restored? + mcrne p15, 0, r4, c15, c0, 1 @ No, so restore it + mrc p15, 0, r10, c15, c0, 0 @ Read Power register + teq r5, r10 @ Already restored? + mcrne p15, 0, r5, c15, c0, 0 @ No, so restore it + b cpu_v7_do_resume +ENDPROC(cpu_ca9mp_do_resume) +#endif + #ifdef CONFIG_CPU_PJ4B globl_equ cpu_pj4b_switch_mm, cpu_v7_switch_mm globl_equ cpu_pj4b_set_pte_ext, cpu_v7_set_pte_ext @@ -163,7 +197,7 @@ ENTRY(cpu_pj4b_do_idle) dsb @ WFI may enter a low-power mode wfi dsb @barrier - mov pc, lr + ret lr ENDPROC(cpu_pj4b_do_idle) #else globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle @@ -184,16 +218,16 @@ ENDPROC(cpu_pj4b_do_suspend) ENTRY(cpu_pj4b_do_resume) ldmia r0!, {r6 - r10} - mcr p15, 1, r6, c15, c1, 0 @ save CP15 - extra features - mcr p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 - mcr p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2 - mcr p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1 - mcr p15, 0, r10, c9, c14, 0 @ save CP15 - PMC + mcr p15, 1, r6, c15, c1, 0 @ restore CP15 - extra features + mcr p15, 1, r7, c15, c2, 0 @ restore CP15 - Aux Func Modes Ctrl 0 + mcr p15, 1, r8, c15, c1, 2 @ restore CP15 - Aux Debug Modes Ctrl 2 + mcr p15, 1, r9, c15, c1, 1 @ restore CP15 - Aux Debug Modes Ctrl 1 + mcr p15, 0, r10, c9, c14, 0 @ restore CP15 - PMC b cpu_v7_do_resume ENDPROC(cpu_pj4b_do_resume) #endif .globl cpu_pj4b_suspend_size -.equ cpu_pj4b_suspend_size, 4 * 14 +.equ cpu_pj4b_suspend_size, cpu_v7_suspend_size + 4 * 5 #endif @@ -216,6 +250,7 @@ __v7_cr7mp_setup: __v7_ca7mp_setup: __v7_ca12mp_setup: __v7_ca15mp_setup: +__v7_b15mp_setup: __v7_ca17mp_setup: mov r10, #0 1: @@ -407,7 +442,7 @@ __v7_setup: bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions - mov pc, lr @ return to head.S:__ret + ret lr @ return to head.S:__ret ENDPROC(__v7_setup) .align 2 @@ -418,6 +453,7 @@ __v7_setup_stack: @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 + define_processor_functions ca9mp, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 #ifdef CONFIG_CPU_PJ4B define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 #endif @@ -470,7 +506,7 @@ __v7_ca5mp_proc_info: __v7_ca9mp_proc_info: .long 0x410fc090 .long 0xff0ffff0 - __v7_proc __v7_ca9mp_setup + __v7_proc __v7_ca9mp_setup, proc_fns = ca9mp_processor_functions .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info #endif /* CONFIG_ARM_LPAE */ @@ -528,6 +564,16 @@ __v7_ca15mp_proc_info: .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* + * Broadcom Corporation Brahma-B15 processor. + */ + .type __v7_b15mp_proc_info, #object +__v7_b15mp_proc_info: + .long 0x420f00f0 + .long 0xff0ffff0 + __v7_proc __v7_b15mp_setup, hwcaps = HWCAP_IDIV + .size __v7_b15mp_proc_info, . - __v7_b15mp_proc_info + + /* * ARM Ltd. Cortex A17 processor. */ .type __v7_ca17mp_proc_info, #object diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 1ca37c72f12f..d1e68b553d3b 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -16,11 +16,11 @@ #include "proc-macros.S" ENTRY(cpu_v7m_proc_init) - mov pc, lr + ret lr ENDPROC(cpu_v7m_proc_init) ENTRY(cpu_v7m_proc_fin) - mov pc, lr + ret lr ENDPROC(cpu_v7m_proc_fin) /* @@ -34,7 +34,7 @@ ENDPROC(cpu_v7m_proc_fin) */ .align 5 ENTRY(cpu_v7m_reset) - mov pc, r0 + ret r0 ENDPROC(cpu_v7m_reset) /* @@ -46,18 +46,18 @@ ENDPROC(cpu_v7m_reset) */ ENTRY(cpu_v7m_do_idle) wfi - mov pc, lr + ret lr ENDPROC(cpu_v7m_do_idle) ENTRY(cpu_v7m_dcache_clean_area) - mov pc, lr + ret lr ENDPROC(cpu_v7m_dcache_clean_area) /* * There is no MMU, so here is nothing to do. */ ENTRY(cpu_v7m_switch_mm) - mov pc, lr + ret lr ENDPROC(cpu_v7m_switch_mm) .globl cpu_v7m_suspend_size @@ -65,11 +65,11 @@ ENDPROC(cpu_v7m_switch_mm) #ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v7m_do_suspend) - mov pc, lr + ret lr ENDPROC(cpu_v7m_do_suspend) ENTRY(cpu_v7m_do_resume) - mov pc, lr + ret lr ENDPROC(cpu_v7m_do_resume) #endif @@ -120,7 +120,7 @@ __v7m_setup: ldr r12, [r0, V7M_SCB_CCR] @ system control register orr r12, #V7M_SCB_CCR_STKALIGN str r12, [r0, V7M_SCB_CCR] - mov pc, lr + ret lr ENDPROC(__v7m_setup) .align 2 diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index dc1645890042..f8acdfece036 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -83,7 +83,7 @@ * Nothing too exciting at the moment */ ENTRY(cpu_xsc3_proc_init) - mov pc, lr + ret lr /* * cpu_xsc3_proc_fin() @@ -93,7 +93,7 @@ ENTRY(cpu_xsc3_proc_fin) bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_xsc3_reset(loc) @@ -119,7 +119,7 @@ ENTRY(cpu_xsc3_reset) @ CAUTION: MMU turned off from this point. We count on the pipeline @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs - mov pc, r0 + ret r0 ENDPROC(cpu_xsc3_reset) .popsection @@ -138,7 +138,7 @@ ENDPROC(cpu_xsc3_reset) ENTRY(cpu_xsc3_do_idle) mov r0, #1 mcr p14, 0, r0, c7, c0, 0 @ go to idle - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -150,7 +150,7 @@ ENTRY(cpu_xsc3_do_idle) ENTRY(xsc3_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(xsc3_flush_icache_all) /* @@ -176,7 +176,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, vm_flags) @@ -205,7 +205,7 @@ ENTRY(xsc3_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -232,7 +232,7 @@ ENTRY(xsc3_coherent_user_range) mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -253,7 +253,7 @@ ENTRY(xsc3_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -277,7 +277,7 @@ xsc3_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -294,7 +294,7 @@ xsc3_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -311,7 +311,7 @@ ENTRY(xsc3_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -334,7 +334,7 @@ ENDPROC(xsc3_dma_map_area) * - dir - DMA direction */ ENTRY(xsc3_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(xsc3_dma_unmap_area) .globl xsc3_flush_kern_cache_louis @@ -348,7 +348,7 @@ ENTRY(cpu_xsc3_dcache_clean_area) add r0, r0, #CACHELINESIZE subs r1, r1, #CACHELINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext) orr r2, r2, ip xscale_set_pte_ext_epilogue - mov pc, lr + ret lr .ltorg .align @@ -478,7 +478,7 @@ __xsc3_setup: bic r0, r0, r5 @ ..V. ..R. .... ..A. orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu) @ ...I Z..S .... .... (uc) - mov pc, lr + ret lr .size __xsc3_setup, . - __xsc3_setup diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index d19b1cfcad91..23259f104c66 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -118,7 +118,7 @@ ENTRY(cpu_xscale_proc_init) mrc p15, 0, r1, c1, c0, 1 bic r1, r1, #1 mcr p15, 0, r1, c1, c0, 1 - mov pc, lr + ret lr /* * cpu_xscale_proc_fin() @@ -128,7 +128,7 @@ ENTRY(cpu_xscale_proc_fin) bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_xscale_reset(loc) @@ -160,7 +160,7 @@ ENTRY(cpu_xscale_reset) @ CAUTION: MMU turned off from this point. We count on the pipeline @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs - mov pc, r0 + ret r0 ENDPROC(cpu_xscale_reset) .popsection @@ -179,7 +179,7 @@ ENDPROC(cpu_xscale_reset) ENTRY(cpu_xscale_do_idle) mov r0, #1 mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -191,7 +191,7 @@ ENTRY(cpu_xscale_do_idle) ENTRY(xscale_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(xscale_flush_icache_all) /* @@ -216,7 +216,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, vm_flags) @@ -245,7 +245,7 @@ ENTRY(xscale_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -269,7 +269,7 @@ ENTRY(xscale_coherent_kern_range) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * coherent_user_range(start, end) @@ -291,7 +291,7 @@ ENTRY(xscale_coherent_user_range) mov r0, #0 mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -312,7 +312,7 @@ ENTRY(xscale_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -336,7 +336,7 @@ xscale_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -353,7 +353,7 @@ xscale_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -371,7 +371,7 @@ ENTRY(xscale_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -407,7 +407,7 @@ ENDPROC(xscale_80200_A0_A1_dma_map_area) * - dir - DMA direction */ ENTRY(xscale_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(xscale_dma_unmap_area) .globl xscale_flush_kern_cache_louis @@ -458,7 +458,7 @@ ENTRY(cpu_xscale_dcache_clean_area) add r0, r0, #CACHELINESIZE subs r1, r1, #CACHELINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -521,7 +521,7 @@ ENTRY(cpu_xscale_set_pte_ext) orr r2, r2, ip xscale_set_pte_ext_epilogue - mov pc, lr + ret lr .ltorg .align @@ -572,7 +572,7 @@ __xscale_setup: mrc p15, 0, r0, c1, c0, 0 @ get control register bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __xscale_setup, . - __xscale_setup /* diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S index d3ddcf9a76ca..d2d9ecbe0aac 100644 --- a/arch/arm/mm/tlb-fa.S +++ b/arch/arm/mm/tlb-fa.S @@ -18,6 +18,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/tlbflush.h> #include "proc-macros.S" @@ -37,7 +38,7 @@ ENTRY(fa_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? - movne pc, lr @ no, we dont do anything + retne lr @ no, we dont do anything mov r3, #0 mcr p15, 0, r3, c7, c10, 4 @ drain WB bic r0, r0, #0x0ff @@ -47,7 +48,7 @@ ENTRY(fa_flush_user_tlb_range) cmp r0, r1 blo 1b mcr p15, 0, r3, c7, c10, 4 @ data write barrier - mov pc, lr + ret lr ENTRY(fa_flush_kern_tlb_range) @@ -61,7 +62,7 @@ ENTRY(fa_flush_kern_tlb_range) blo 1b mcr p15, 0, r3, c7, c10, 4 @ data write barrier mcr p15, 0, r3, c7, c5, 4 @ prefetch flush (isb) - mov pc, lr + ret lr __INITDATA diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S index 17a025ade573..a2b5dca42048 100644 --- a/arch/arm/mm/tlb-v4.S +++ b/arch/arm/mm/tlb-v4.S @@ -14,6 +14,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/tlbflush.h> #include "proc-macros.S" @@ -33,7 +34,7 @@ ENTRY(v4_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? - movne pc, lr @ no, we dont do anything + retne lr @ no, we dont do anything .v4_flush_kern_tlb_range: bic r0, r0, #0x0ff bic r0, r0, #0xf00 @@ -41,7 +42,7 @@ ENTRY(v4_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr /* * v4_flush_kern_tlb_range(start, end) diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S index c04598fa4d4a..5a093b458dbc 100644 --- a/arch/arm/mm/tlb-v4wb.S +++ b/arch/arm/mm/tlb-v4wb.S @@ -14,6 +14,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/tlbflush.h> #include "proc-macros.S" @@ -33,7 +34,7 @@ ENTRY(v4wb_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? - movne pc, lr @ no, we dont do anything + retne lr @ no, we dont do anything vma_vm_flags r2, r2 mcr p15, 0, r3, c7, c10, 4 @ drain WB tst r2, #VM_EXEC @@ -44,7 +45,7 @@ ENTRY(v4wb_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr /* * v4_flush_kern_tlb_range(start, end) @@ -65,7 +66,7 @@ ENTRY(v4wb_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr __INITDATA diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S index 1f6062b6c1c1..058861548f68 100644 --- a/arch/arm/mm/tlb-v4wbi.S +++ b/arch/arm/mm/tlb-v4wbi.S @@ -14,6 +14,7 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/tlbflush.h> #include "proc-macros.S" @@ -32,7 +33,7 @@ ENTRY(v4wbi_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? - movne pc, lr @ no, we dont do anything + retne lr @ no, we dont do anything mov r3, #0 mcr p15, 0, r3, c7, c10, 4 @ drain WB vma_vm_flags r2, r2 @@ -44,7 +45,7 @@ ENTRY(v4wbi_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr ENTRY(v4wbi_flush_kern_tlb_range) mov r3, #0 @@ -56,7 +57,7 @@ ENTRY(v4wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr __INITDATA diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index eca07f550a0b..6f689be638bd 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/linkage.h> #include <asm/asm-offsets.h> +#include <asm/assembler.h> #include <asm/page.h> #include <asm/tlbflush.h> #include "proc-macros.S" @@ -55,7 +56,7 @@ ENTRY(v6wbi_flush_user_tlb_range) cmp r0, r1 blo 1b mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier - mov pc, lr + ret lr /* * v6wbi_flush_kern_tlb_range(start,end) @@ -84,7 +85,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) blo 1b mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier mcr p15, 0, r2, c7, c5, 4 @ prefetch flush (isb) - mov pc, lr + ret lr __INIT diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 355308767bae..e5101a3bc57c 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -57,7 +57,7 @@ ENTRY(v7wbi_flush_user_tlb_range) cmp r0, r1 blo 1b dsb ish - mov pc, lr + ret lr ENDPROC(v7wbi_flush_user_tlb_range) /* @@ -86,7 +86,7 @@ ENTRY(v7wbi_flush_kern_tlb_range) blo 1b dsb ish isb - mov pc, lr + ret lr ENDPROC(v7wbi_flush_kern_tlb_range) __INIT diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index fb5503ce016f..a37b989a2f91 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -56,7 +56,7 @@ #define FLAG_NEED_X_RESET (1 << 0) struct jit_ctx { - const struct sk_filter *skf; + const struct bpf_prog *skf; unsigned idx; unsigned prologue_bytes; int ret0_fp_idx; @@ -465,7 +465,7 @@ static inline void update_on_xread(struct jit_ctx *ctx) static int build_body(struct jit_ctx *ctx) { void *load_func[] = {jit_get_skb_b, jit_get_skb_h, jit_get_skb_w}; - const struct sk_filter *prog = ctx->skf; + const struct bpf_prog *prog = ctx->skf; const struct sock_filter *inst; unsigned i, load_order, off, condt; int imm12; @@ -857,7 +857,7 @@ b_epilogue: } -void bpf_jit_compile(struct sk_filter *fp) +void bpf_jit_compile(struct bpf_prog *fp) { struct jit_ctx ctx; unsigned tmp_idx; @@ -926,7 +926,7 @@ out: return; } -void bpf_jit_free(struct sk_filter *fp) +void bpf_jit_free(struct bpf_prog *fp) { if (fp->jited) module_free(NULL, fp->bpf_func); diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S index d18dde95b8aa..5d65be1f1e8a 100644 --- a/arch/arm/nwfpe/entry.S +++ b/arch/arm/nwfpe/entry.S @@ -19,7 +19,7 @@ along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <asm/assembler.h> #include <asm/opcodes.h> /* This is the kernel's entry point into the floating point emulator. @@ -92,7 +92,7 @@ emulate: mov r0, r6 @ prepare for EmulateAll() bl EmulateAll @ emulate the instruction cmp r0, #0 @ was emulation successful - moveq pc, r4 @ no, return failure + reteq r4 @ no, return failure next: .Lx1: ldrt r6, [r5], #4 @ get the next instruction and @@ -102,7 +102,7 @@ next: teq r2, #0x0C000000 teqne r2, #0x0D000000 teqne r2, #0x0E000000 - movne pc, r9 @ return ok if not a fp insn + retne r9 @ return ok if not a fp insn str r5, [sp, #S_PC] @ update PC copy in regs @@ -115,7 +115,7 @@ next: @ plain LDR instruction. Weird, but it seems harmless. .pushsection .fixup,"ax" .align 2 -.Lfix: mov pc, r9 @ let the user eat segfaults +.Lfix: ret r9 @ let the user eat segfaults .popsection .pushsection __ex_table,"a" diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 99c63d4b6af8..cc649a1e46da 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -33,12 +33,14 @@ static struct op_perf_name { char *perf_name; char *op_name; } op_perf_name_map[] = { - { "xscale1", "arm/xscale1" }, - { "xscale1", "arm/xscale2" }, - { "v6", "arm/armv6" }, - { "v6mpcore", "arm/mpcore" }, - { "ARMv7 Cortex-A8", "arm/armv7" }, - { "ARMv7 Cortex-A9", "arm/armv7-ca9" }, + { "armv5_xscale1", "arm/xscale1" }, + { "armv5_xscale2", "arm/xscale2" }, + { "armv6_1136", "arm/armv6" }, + { "armv6_1156", "arm/armv6" }, + { "armv6_1176", "arm/armv6" }, + { "armv6_11mpcore", "arm/mpcore" }, + { "armv7_cortex_a8", "arm/armv7" }, + { "armv7_cortex_a9", "arm/armv7-ca9" }, }; char *op_name_from_perf_id(void) @@ -107,10 +109,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) if (!user_mode(regs)) { struct stackframe frame; - frame.fp = regs->ARM_fp; - frame.sp = regs->ARM_sp; - frame.lr = regs->ARM_lr; - frame.pc = regs->ARM_pc; + arm_get_current_stackframe(regs, &frame); walk_stackframe(&frame, report_trace, &depth); return; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b5608b1f9fbd..c2baa8ede543 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -698,6 +698,8 @@ int omap_request_dma(int dev_id, const char *dev_name, unsigned long flags; struct omap_dma_lch *chan; + WARN(strcmp(dev_name, "DMA engine"), "Using deprecated platform DMA API - please update to DMA engine"); + spin_lock_irqsave(&dma_chan_lock, flags); for (ch = 0; ch < dma_chan_count; ch++) { if (free_ch == -1 && dma_chan[ch].dev_id == -1) { @@ -2100,7 +2102,7 @@ static int omap_system_dma_probe(struct platform_device *pdev) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (dma_omap2plus()) { + if (dma_omap2plus() && !(d->dev_caps & DMA_ENGINE_HANDLE_IRQ)) { strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); if (dma_irq < 0) { @@ -2145,7 +2147,8 @@ static int omap_system_dma_remove(struct platform_device *pdev) char irq_name[4]; strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); - remove_irq(dma_irq, &omap24xx_dma_irq); + if (dma_irq >= 0) + remove_irq(dma_irq, &omap24xx_dma_irq); } else { int irq_rel = 0; for ( ; irq_rel < dma_chan_count; irq_rel++) { diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 301b892d97d9..c87aefbf3a13 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -6,30 +6,16 @@ config PLAT_SAMSUNG bool - depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS + depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_EXYNOS || ARCH_S5PV210 default y select GENERIC_IRQ_CHIP select NO_IOPORT_MAP help Base platform code for all Samsung SoC based systems -config PLAT_S5P - bool - depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) - default y - select ARCH_REQUIRE_GPIOLIB - select ARM_VIC - select NO_IOPORT_MAP - select PLAT_SAMSUNG - select S3C_GPIO_TRACK - select S5P_GPIO_DRVSTR - select SAMSUNG_CLKSRC if !COMMON_CLK - help - Base platform code for Samsung's S5P series SoC. - config SAMSUNG_PM bool - depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM) + depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX) default y help Base platform power management code for samsung code @@ -65,65 +51,6 @@ config SAMSUNG_ATAGS if SAMSUNG_ATAGS -# clock options - -config SAMSUNG_CLOCK - bool - default y if !COMMON_CLK - -config SAMSUNG_CLKSRC - bool - help - Select the clock code for the clksrc implementation - used by newer systems such as the S3C64XX. - -config S5P_CLOCK - def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) - help - Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs - -# options for IRQ support - -config S5P_IRQ - def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) - help - Support common interrupt part for ARCH_S5P SoCs - -config S5P_EXT_INT - bool - help - Use the external interrupts (other than GPIO interrupts.) - Note: Do not choose this for S5P6440 and S5P6450. - -config S5P_GPIO_INT - bool - help - Common code for the GPIO interrupts (other than external interrupts.) - -# options for gpio configuration support - -config S5P_GPIO_DRVSTR - bool - help - Internal configuration to get and set correct GPIO driver strength - helper - -config SAMSUNG_GPIO_EXTRA - int "Number of additional GPIO pins" - default 128 if SAMSUNG_GPIO_EXTRA128 - default 64 if SAMSUNG_GPIO_EXTRA64 - default 0 - help - Use additional GPIO space in addition to the GPIO's the SOC - provides. This allows expanding the GPIO space for use with - GPIO expanders. - -config SAMSUNG_GPIO_EXTRA64 - bool - -config SAMSUNG_GPIO_EXTRA128 - bool - config S3C_GPIO_SPACE int "Space between gpio banks" default 0 @@ -139,12 +66,6 @@ config S3C_GPIO_TRACK Internal configuration option to enable the s3c specific gpio chip tracking if the platform requires it. -# uart options - -config S5P_DEV_UART - def_bool y - depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) - # ADC driver config S3C_ADC @@ -302,66 +223,6 @@ config SAMSUNG_DEV_BACKLIGHT help Compile in platform device definition LCD backlight with PWM Timer -config S5P_DEV_CSIS0 - bool - help - Compile in platform device definitions for MIPI-CSIS channel 0 - -config S5P_DEV_CSIS1 - bool - help - Compile in platform device definitions for MIPI-CSIS channel 1 - -config S5P_DEV_FIMC0 - bool - help - Compile in platform device definitions for FIMC controller 0 - -config S5P_DEV_FIMC1 - bool - help - Compile in platform device definitions for FIMC controller 1 - -config S5P_DEV_FIMC2 - bool - help - Compile in platform device definitions for FIMC controller 2 - -config S5P_DEV_FIMC3 - bool - help - Compile in platform device definitions for FIMC controller 3 - -config S5P_DEV_FIMD0 - bool - help - Compile in platform device definitions for FIMD controller 0 - -config S5P_DEV_G2D - bool - help - Compile in platform device definitions for G2D device - -config S5P_DEV_I2C_HDMIPHY - bool - help - Compile in platform device definitions for I2C HDMIPHY controller - -config S5P_DEV_JPEG - bool - help - Compile in platform device definitions for JPEG codec - -config S5P_DEV_ONENAND - bool - help - Compile in platform device definition for OneNAND controller - -config S5P_DEV_TV - bool - help - Compile in platform device definition for TV interface - config S3C24XX_PWM bool "PWM device support" select PWM @@ -382,12 +243,6 @@ config S3C_DMA help Internal configuration for S3C DMA core -config S5P_IRQ_PM - bool - default y if S5P_PM - help - Legacy IRQ power management for S5P platforms - config SAMSUNG_PM_GPIO bool default y if GPIO_SAMSUNG && PM @@ -397,7 +252,7 @@ config SAMSUNG_PM_GPIO config SAMSUNG_DMADEV bool "Use legacy Samsung DMA abstraction" - depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX + depends on CPU_S5PV210 || ARCH_S3C64XX select DMADEVICES default y help @@ -470,18 +325,6 @@ config SAMSUNG_WDT_RESET Compile support for system restart by triggering watchdog reset. Used on SoCs that do not provide dedicated reset control. -config S5P_PM - bool - help - Common code for power management support on S5P and newer SoCs - Note: Do not select this for S5P6440 and S5P6450. - -config S5P_SLEEP - bool - help - Internal config node to apply common S5P sleep management code. - Can be selected by S5P and newer SoCs with similar sleep procedure. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 5e5beaa9ae15..5fe175017f07 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -5,7 +5,6 @@ # Licensed under GPLv2 ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include -ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include obj-y := obj-m := @@ -16,15 +15,6 @@ obj- := obj-y += init.o cpu.o -obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o - -obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o -obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o - -obj-$(CONFIG_S5P_IRQ) += s5p-irq.o -obj-$(CONFIG_S5P_EXT_INT) += s5p-irq-eint.o -obj-$(CONFIG_S5P_GPIO_INT) += s5p-irq-gpioint.o - # ADC obj-$(CONFIG_S3C_ADC) += adc.o @@ -36,7 +26,6 @@ obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o -obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o @@ -58,7 +47,3 @@ obj-$(CONFIG_SAMSUNG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o - -obj-$(CONFIG_S5P_PM) += s5p-pm.o -obj-$(CONFIG_S5P_IRQ_PM) += s5p-irq-pm.o -obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 79690f2f6d3f..468352633101 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -43,7 +43,7 @@ enum s3c_cpu_type { TYPE_ADCV1, /* S3C24XX */ TYPE_ADCV11, /* S3C2443 */ TYPE_ADCV12, /* S3C2416, S3C2450 */ - TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */ + TYPE_ADCV2, /* S3C64XX */ TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */ }; diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c deleted file mode 100644 index 786a4107a157..000000000000 --- a/arch/arm/plat-samsung/clock-clksrc.c +++ /dev/null @@ -1,212 +0,0 @@ -/* linux/arch/arm/plat-samsung/clock-clksrc.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu-freq.h> - -static inline struct clksrc_clk *to_clksrc(struct clk *clk) -{ - return container_of(clk, struct clksrc_clk, clk); -} - -static inline u32 bit_mask(u32 shift, u32 nr_bits) -{ - u32 mask = 0xffffffff >> (32 - nr_bits); - - return mask << shift; -} - -static unsigned long s3c_getrate_clksrc(struct clk *clk) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv = __raw_readl(sclk->reg_div.reg); - u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size); - - clkdiv &= mask; - clkdiv >>= sclk->reg_div.shift; - clkdiv++; - - rate /= clkdiv; - return rate; -} - -static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - void __iomem *reg = sclk->reg_div.reg; - unsigned int div; - u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size); - u32 val; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - if (div > (1 << sclk->reg_div.size)) - return -EINVAL; - - val = __raw_readl(reg); - val &= ~mask; - val |= (div - 1) << sclk->reg_div.shift; - __raw_writel(val, reg); - - return 0; -} - -static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - struct clksrc_sources *srcs = sclk->sources; - u32 clksrc = __raw_readl(sclk->reg_src.reg); - u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size); - int src_nr = -1; - int ptr; - - for (ptr = 0; ptr < srcs->nr_sources; ptr++) - if (srcs->sources[ptr] == parent) { - src_nr = ptr; - break; - } - - if (src_nr >= 0) { - clk->parent = parent; - - clksrc &= ~mask; - clksrc |= src_nr << sclk->reg_src.shift; - - __raw_writel(clksrc, sclk->reg_src.reg); - return 0; - } - - return -EINVAL; -} - -static unsigned long s3c_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - struct clksrc_clk *sclk = to_clksrc(clk); - unsigned long parent_rate = clk_get_rate(clk->parent); - int max_div = 1 << sclk->reg_div.size; - int div; - - if (rate >= parent_rate) - rate = parent_rate; - else { - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div == 0) - div = 1; - if (div > max_div) - div = max_div; - - rate = parent_rate / div; - } - - return rate; -} - -/* Clock initialisation code */ - -void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce) -{ - struct clksrc_sources *srcs = clk->sources; - u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size); - u32 clksrc; - - if (!clk->reg_src.reg) { - if (!clk->clk.parent) - printk(KERN_ERR "%s: no parent clock specified\n", - clk->clk.name); - return; - } - - clksrc = __raw_readl(clk->reg_src.reg); - clksrc &= mask; - clksrc >>= clk->reg_src.shift; - - if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { - printk(KERN_ERR "%s: bad source %d\n", - clk->clk.name, clksrc); - return; - } - - clk->clk.parent = srcs->sources[clksrc]; - - if (announce) - printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", - clk->clk.name, clk->clk.parent->name, clksrc, - clk_get_rate(&clk->clk)); -} - -static struct clk_ops clksrc_ops = { - .set_parent = s3c_setparent_clksrc, - .get_rate = s3c_getrate_clksrc, - .set_rate = s3c_setrate_clksrc, - .round_rate = s3c_roundrate_clksrc, -}; - -static struct clk_ops clksrc_ops_nodiv = { - .set_parent = s3c_setparent_clksrc, -}; - -static struct clk_ops clksrc_ops_nosrc = { - .get_rate = s3c_getrate_clksrc, - .set_rate = s3c_setrate_clksrc, - .round_rate = s3c_roundrate_clksrc, -}; - -void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size) -{ - int ret; - - for (; size > 0; size--, clksrc++) { - if (!clksrc->reg_div.reg && !clksrc->reg_src.reg) - printk(KERN_ERR "%s: clock %s has no registers set\n", - __func__, clksrc->clk.name); - - /* fill in the default functions */ - - if (!clksrc->clk.ops) { - if (!clksrc->reg_div.reg) - clksrc->clk.ops = &clksrc_ops_nodiv; - else if (!clksrc->reg_src.reg) - clksrc->clk.ops = &clksrc_ops_nosrc; - else - clksrc->clk.ops = &clksrc_ops; - } - - /* setup the clocksource, but do not announce it - * as it may be re-set by the setup routines - * called after the rest of the clocks have been - * registered - */ - s3c_set_clksrc(clksrc, false); - - ret = s3c24xx_register_clock(&clksrc->clk); - - if (ret < 0) { - printk(KERN_ERR "%s: failed to register %s (%d)\n", - __func__, clksrc->clk.name, ret); - } - } -} diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c deleted file mode 100644 index d103ac1a52af..000000000000 --- a/arch/arm/plat-samsung/clock.c +++ /dev/null @@ -1,539 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/clock.c - * - * Copyright 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX Core clock control support - * - * Based on, and code from linux/arch/arm/mach-versatile/clock.c - ** - ** Copyright (C) 2004 ARM Limited. - ** Written by Deep Blue Solutions Limited. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#if defined(CONFIG_DEBUG_FS) -#include <linux/debugfs.h> -#endif - -#include <asm/irq.h> - -#include <plat/cpu-freq.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> /* for s3c24xx_uart_devs */ - -/* clock information */ - -static LIST_HEAD(clocks); - -/* We originally used an mutex here, but some contexts (see resume) - * are calling functions such as clk_set_parent() with IRQs disabled - * causing an BUG to be triggered. - */ -DEFINE_SPINLOCK(clocks_lock); - -/* Global watchdog clock used by arch_wtd_reset() callback */ -struct clk *s3c2410_wdtclk; -static int __init s3c_wdt_reset_init(void) -{ - s3c2410_wdtclk = clk_get(NULL, "watchdog"); - if (IS_ERR(s3c2410_wdtclk)) - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); - return 0; -} -arch_initcall(s3c_wdt_reset_init); - -/* enable and disable calls for use with the clk struct */ - -static int clk_null_enable(struct clk *clk, int enable) -{ - return 0; -} - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (IS_ERR(clk) || clk == NULL) - return -EINVAL; - - clk_enable(clk->parent); - - spin_lock_irqsave(&clocks_lock, flags); - - if ((clk->usage++) == 0) - (clk->enable)(clk, 1); - - spin_unlock_irqrestore(&clocks_lock, flags); - return 0; -} - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (IS_ERR(clk) || clk == NULL) - return; - - spin_lock_irqsave(&clocks_lock, flags); - - if ((--clk->usage) == 0) - (clk->enable)(clk, 0); - - spin_unlock_irqrestore(&clocks_lock, flags); - clk_disable(clk->parent); -} - - -unsigned long clk_get_rate(struct clk *clk) -{ - if (IS_ERR_OR_NULL(clk)) - return 0; - - if (clk->rate != 0) - return clk->rate; - - if (clk->ops != NULL && clk->ops->get_rate != NULL) - return (clk->ops->get_rate)(clk); - - if (clk->parent != NULL) - return clk_get_rate(clk->parent); - - return clk->rate; -} - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (!IS_ERR_OR_NULL(clk) && clk->ops && clk->ops->round_rate) - return (clk->ops->round_rate)(clk, rate); - - return rate; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret; - - if (IS_ERR_OR_NULL(clk)) - return -EINVAL; - - /* We do not default just do a clk->rate = rate as - * the clock may have been made this way by choice. - */ - - WARN_ON(clk->ops == NULL); - WARN_ON(clk->ops && clk->ops->set_rate == NULL); - - if (clk->ops == NULL || clk->ops->set_rate == NULL) - return -EINVAL; - - spin_lock_irqsave(&clocks_lock, flags); - ret = (clk->ops->set_rate)(clk, rate); - spin_unlock_irqrestore(&clocks_lock, flags); - - return ret; -} - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - int ret = 0; - - if (IS_ERR_OR_NULL(clk) || IS_ERR_OR_NULL(parent)) - return -EINVAL; - - spin_lock_irqsave(&clocks_lock, flags); - - if (clk->ops && clk->ops->set_parent) - ret = (clk->ops->set_parent)(clk, parent); - - spin_unlock_irqrestore(&clocks_lock, flags); - - return ret; -} - -EXPORT_SYMBOL(clk_enable); -EXPORT_SYMBOL(clk_disable); -EXPORT_SYMBOL(clk_get_rate); -EXPORT_SYMBOL(clk_round_rate); -EXPORT_SYMBOL(clk_set_rate); -EXPORT_SYMBOL(clk_get_parent); -EXPORT_SYMBOL(clk_set_parent); - -/* base clocks */ - -int clk_default_setrate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 0; -} - -struct clk_ops clk_ops_def_setrate = { - .set_rate = clk_default_setrate, -}; - -struct clk clk_xtal = { - .name = "xtal", - .rate = 0, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_ext = { - .name = "ext", -}; - -struct clk clk_epll = { - .name = "epll", -}; - -struct clk clk_mpll = { - .name = "mpll", - .ops = &clk_ops_def_setrate, -}; - -struct clk clk_upll = { - .name = "upll", - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_f = { - .name = "fclk", - .rate = 0, - .parent = &clk_mpll, - .ctrlbit = 0, -}; - -struct clk clk_h = { - .name = "hclk", - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .ops = &clk_ops_def_setrate, -}; - -struct clk clk_p = { - .name = "pclk", - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .ops = &clk_ops_def_setrate, -}; - -struct clk clk_usb_bus = { - .name = "usb-bus", - .rate = 0, - .parent = &clk_upll, -}; - - -struct clk s3c24xx_uclk = { - .name = "uclk", -}; - -/* initialise the clock system */ - -/** - * s3c24xx_register_clock() - register a clock - * @clk: The clock to register - * - * Add the specified clock to the list of clocks known by the system. - */ -int s3c24xx_register_clock(struct clk *clk) -{ - if (clk->enable == NULL) - clk->enable = clk_null_enable; - - /* fill up the clk_lookup structure and register it*/ - clk->lookup.dev_id = clk->devname; - clk->lookup.con_id = clk->name; - clk->lookup.clk = clk; - clkdev_add(&clk->lookup); - - return 0; -} - -/** - * s3c24xx_register_clocks() - register an array of clock pointers - * @clks: Pointer to an array of struct clk pointers - * @nr_clks: The number of clocks in the @clks array. - * - * Call s3c24xx_register_clock() for all the clock pointers contained - * in the @clks list. Returns the number of failures. - */ -int s3c24xx_register_clocks(struct clk **clks, int nr_clks) -{ - int fails = 0; - - for (; nr_clks > 0; nr_clks--, clks++) { - if (s3c24xx_register_clock(*clks) < 0) { - struct clk *clk = *clks; - printk(KERN_ERR "%s: failed to register %p: %s\n", - __func__, clk, clk->name); - fails++; - } - } - - return fails; -} - -/** - * s3c_register_clocks() - register an array of clocks - * @clkp: Pointer to the first clock in the array. - * @nr_clks: Number of clocks to register. - * - * Call s3c24xx_register_clock() on the @clkp array given, printing an - * error if it fails to register the clock (unlikely). - */ -void __init s3c_register_clocks(struct clk *clkp, int nr_clks) -{ - int ret; - - for (; nr_clks > 0; nr_clks--, clkp++) { - ret = s3c24xx_register_clock(clkp); - - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } -} - -/** - * s3c_disable_clocks() - disable an array of clocks - * @clkp: Pointer to the first clock in the array. - * @nr_clks: Number of clocks to register. - * - * for internal use only at initialisation time. disable the clocks in the - * @clkp array. - */ - -void __init s3c_disable_clocks(struct clk *clkp, int nr_clks) -{ - for (; nr_clks > 0; nr_clks--, clkp++) - (clkp->enable)(clkp, 0); -} - -/* initialise all the clocks */ - -int __init s3c24xx_register_baseclocks(unsigned long xtal) -{ - printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n"); - - clk_xtal.rate = xtal; - - /* register our clocks */ - - if (s3c24xx_register_clock(&clk_xtal) < 0) - printk(KERN_ERR "failed to register master xtal\n"); - - if (s3c24xx_register_clock(&clk_mpll) < 0) - printk(KERN_ERR "failed to register mpll clock\n"); - - if (s3c24xx_register_clock(&clk_upll) < 0) - printk(KERN_ERR "failed to register upll clock\n"); - - if (s3c24xx_register_clock(&clk_f) < 0) - printk(KERN_ERR "failed to register cpu fclk\n"); - - if (s3c24xx_register_clock(&clk_h) < 0) - printk(KERN_ERR "failed to register cpu hclk\n"); - - if (s3c24xx_register_clock(&clk_p) < 0) - printk(KERN_ERR "failed to register cpu pclk\n"); - - return 0; -} - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* debugfs support to trace clock tree hierarchy and attributes */ - -static struct dentry *clk_debugfs_root; - -static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level) -{ - struct clk *child; - const char *state; - char buf[255] = { 0 }; - int n = 0; - - if (c->name) - n = snprintf(buf, sizeof(buf) - 1, "%s", c->name); - - if (c->devname) - n += snprintf(buf + n, sizeof(buf) - 1 - n, ":%s", c->devname); - - state = (c->usage > 0) ? "on" : "off"; - - seq_printf(s, "%*s%-*s %-6s %-3d %-10lu\n", - level * 3 + 1, "", - 50 - level * 3, buf, - state, c->usage, clk_get_rate(c)); - - list_for_each_entry(child, &clocks, list) { - if (child->parent != c) - continue; - - clock_tree_show_one(s, child, level + 1); - } -} - -static int clock_tree_show(struct seq_file *s, void *data) -{ - struct clk *c; - unsigned long flags; - - seq_printf(s, " clock state ref rate\n"); - seq_printf(s, "----------------------------------------------------\n"); - - spin_lock_irqsave(&clocks_lock, flags); - - list_for_each_entry(c, &clocks, list) - if (c->parent == NULL) - clock_tree_show_one(s, c, 0); - - spin_unlock_irqrestore(&clocks_lock, flags); - return 0; -} - -static int clock_tree_open(struct inode *inode, struct file *file) -{ - return single_open(file, clock_tree_show, inode->i_private); -} - -static const struct file_operations clock_tree_fops = { - .open = clock_tree_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int clock_rate_show(void *data, u64 *val) -{ - struct clk *c = data; - *val = clk_get_rate(c); - return 0; -} -DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_rate_show, NULL, "%llu\n"); - -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->parent; - char s[255]; - char *p = s; - - p += sprintf(p, "%s", c->devname); - - d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - - c->dent = d; - - d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usage); - if (!d) { - err = -ENOMEM; - goto err_out; - } - - d = debugfs_create_file("rate", S_IRUGO, c->dent, c, &clock_rate_fops); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err = -ENOMEM; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - d = debugfs_create_file("clock_tree", S_IRUGO, clk_debugfs_root, NULL, - &clock_tree_fops); - if (!d) - goto err_out; - - list_for_each_entry(c, &clocks, list) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index 364963a0a344..360618ee39e5 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -15,8 +15,7 @@ #include <linux/init.h> #include <linux/io.h> - -#include <mach/map.h> +#include <plat/map-base.h> #include <plat/cpu.h> unsigned long samsung_cpu_id; diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index ead4f1c94058..83c7d154bde0 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -53,7 +53,6 @@ #include <linux/platform_data/ata-samsung_cf.h> #include <plat/fb.h> #include <plat/fb-s3c2410.h> -#include <plat/hdmi.h> #include <linux/platform_data/hwmon-s3c.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> @@ -145,23 +144,6 @@ struct platform_device s3c_device_camif = { }; #endif /* CONFIG_CPU_S3C2440 */ -/* ASOC DMA */ - -#ifdef CONFIG_PLAT_S5P -static struct resource samsung_asoc_idma_resource = DEFINE_RES_IRQ(IRQ_I2S0); - -struct platform_device samsung_asoc_idma = { - .name = "samsung-idma", - .id = -1, - .num_resources = 1, - .resource = &samsung_asoc_idma_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; -#endif - /* FB */ #ifdef CONFIG_S3C_DEV_FB @@ -190,151 +172,6 @@ void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) } #endif /* CONFIG_S3C_DEV_FB */ -/* FIMC */ - -#ifdef CONFIG_S5P_DEV_FIMC0 -static struct resource s5p_fimc0_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_FIMC0, SZ_4K), - [1] = DEFINE_RES_IRQ(IRQ_FIMC0), -}; - -struct platform_device s5p_device_fimc0 = { - .name = "s5p-fimc", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_fimc0_resource), - .resource = s5p_fimc0_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device s5p_device_fimc_md = { - .name = "s5p-fimc-md", - .id = -1, -}; -#endif /* CONFIG_S5P_DEV_FIMC0 */ - -#ifdef CONFIG_S5P_DEV_FIMC1 -static struct resource s5p_fimc1_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_FIMC1, SZ_4K), - [1] = DEFINE_RES_IRQ(IRQ_FIMC1), -}; - -struct platform_device s5p_device_fimc1 = { - .name = "s5p-fimc", - .id = 1, - .num_resources = ARRAY_SIZE(s5p_fimc1_resource), - .resource = s5p_fimc1_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; -#endif /* CONFIG_S5P_DEV_FIMC1 */ - -#ifdef CONFIG_S5P_DEV_FIMC2 -static struct resource s5p_fimc2_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_FIMC2, SZ_4K), - [1] = DEFINE_RES_IRQ(IRQ_FIMC2), -}; - -struct platform_device s5p_device_fimc2 = { - .name = "s5p-fimc", - .id = 2, - .num_resources = ARRAY_SIZE(s5p_fimc2_resource), - .resource = s5p_fimc2_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; -#endif /* CONFIG_S5P_DEV_FIMC2 */ - -#ifdef CONFIG_S5P_DEV_FIMC3 -static struct resource s5p_fimc3_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_FIMC3, SZ_4K), - [1] = DEFINE_RES_IRQ(IRQ_FIMC3), -}; - -struct platform_device s5p_device_fimc3 = { - .name = "s5p-fimc", - .id = 3, - .num_resources = ARRAY_SIZE(s5p_fimc3_resource), - .resource = s5p_fimc3_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; -#endif /* CONFIG_S5P_DEV_FIMC3 */ - -/* G2D */ - -#ifdef CONFIG_S5P_DEV_G2D -static struct resource s5p_g2d_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_G2D, SZ_4K), - [1] = DEFINE_RES_IRQ(IRQ_2D), -}; - -struct platform_device s5p_device_g2d = { - .name = "s5p-g2d", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_g2d_resource), - .resource = s5p_g2d_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; -#endif /* CONFIG_S5P_DEV_G2D */ - -#ifdef CONFIG_S5P_DEV_JPEG -static struct resource s5p_jpeg_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K), - [1] = DEFINE_RES_IRQ(IRQ_JPEG), -}; - -struct platform_device s5p_device_jpeg = { - .name = "s5p-jpeg", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_jpeg_resource), - .resource = s5p_jpeg_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; -#endif /* CONFIG_S5P_DEV_JPEG */ - -/* FIMD0 */ - -#ifdef CONFIG_S5P_DEV_FIMD0 -static struct resource s5p_fimd0_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K), - [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"), - [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"), - [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"), -}; - -struct platform_device s5p_device_fimd0 = { - .name = "s5p-fb", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_fimd0_resource), - .resource = s5p_fimd0_resource, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd) -{ - s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), - &s5p_device_fimd0); -} -#endif /* CONFIG_S5P_DEV_FIMD0 */ - /* HWMON */ #ifdef CONFIG_S3C_DEV_HWMON @@ -722,60 +559,6 @@ void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd) } #endif /* CONFIG_S3C_DEV_I2C7 */ -/* I2C HDMIPHY */ - -#ifdef CONFIG_S5P_DEV_I2C_HDMIPHY -static struct resource s5p_i2c_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_IIC_HDMIPHY, SZ_4K), - [1] = DEFINE_RES_IRQ(IRQ_IIC_HDMIPHY), -}; - -struct platform_device s5p_device_i2c_hdmiphy = { - .name = "s3c2440-hdmiphy-i2c", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_i2c_resource), - .resource = s5p_i2c_resource, -}; - -void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) { - pd = &default_i2c_data; - - if (soc_is_s5pv210()) - pd->bus_num = 3; - else - pd->bus_num = 0; - } - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s5p_device_i2c_hdmiphy); -} - -static struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; - -void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, - struct i2c_board_info *mhl_info, int mhl_bus) -{ - struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; - - if (soc_is_s5pv210()) - pd->hdmiphy_bus = 3; - else - pd->hdmiphy_bus = 0; - - pd->hdmiphy_info = hdmiphy_info; - pd->mhl_info = mhl_info; - pd->mhl_bus = mhl_bus; - - s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), - &s5p_device_hdmi); -} - -#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ - /* I2S */ #ifdef CONFIG_PLAT_S3C24XX @@ -879,36 +662,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } #endif /* CONFIG_PLAT_S3C24XX */ -/* MIPI CSIS */ - -#ifdef CONFIG_S5P_DEV_CSIS0 -static struct resource s5p_mipi_csis0_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K), - [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0), -}; - -struct platform_device s5p_device_mipi_csis0 = { - .name = "s5p-mipi-csis", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource), - .resource = s5p_mipi_csis0_resource, -}; -#endif /* CONFIG_S5P_DEV_CSIS0 */ - -#ifdef CONFIG_S5P_DEV_CSIS1 -static struct resource s5p_mipi_csis1_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K), - [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1), -}; - -struct platform_device s5p_device_mipi_csis1 = { - .name = "s5p-mipi-csis", - .id = 1, - .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource), - .resource = s5p_mipi_csis1_resource, -}; -#endif - /* NAND */ #ifdef CONFIG_S3C_DEV_NAND @@ -1052,43 +805,6 @@ void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) } #endif /* CONFIG_S3C64XX_DEV_ONENAND1 */ -#ifdef CONFIG_S5P_DEV_ONENAND -static struct resource s5p_onenand_resources[] = { - [0] = DEFINE_RES_MEM(S5P_PA_ONENAND, SZ_128K), - [1] = DEFINE_RES_MEM(S5P_PA_ONENAND_DMA, SZ_8K), - [2] = DEFINE_RES_IRQ(IRQ_ONENAND_AUDI), -}; - -struct platform_device s5p_device_onenand = { - .name = "s5pc110-onenand", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_onenand_resources), - .resource = s5p_onenand_resources, -}; -#endif /* CONFIG_S5P_DEV_ONENAND */ - -/* PMU */ - -#if defined(CONFIG_PLAT_S5P) && !defined(CONFIG_ARCH_EXYNOS) -static struct resource s5p_pmu_resource[] = { - DEFINE_RES_IRQ(IRQ_PMU) -}; - -static struct platform_device s5p_device_pmu = { - .name = "arm-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_pmu_resource), - .resource = s5p_pmu_resource, -}; - -static int __init s5p_pmu_init(void) -{ - platform_device_register(&s5p_device_pmu); - return 0; -} -arch_initcall(s5p_pmu_init); -#endif /* CONFIG_PLAT_S5P */ - /* PWM Timer */ #ifdef CONFIG_SAMSUNG_DEV_PWM @@ -1251,52 +967,6 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) } #endif /* CONFIG_SAMSUNG_DEV_TS */ -/* TV */ - -#ifdef CONFIG_S5P_DEV_TV - -static struct resource s5p_hdmi_resources[] = { - [0] = DEFINE_RES_MEM(S5P_PA_HDMI, SZ_1M), - [1] = DEFINE_RES_IRQ(IRQ_HDMI), -}; - -struct platform_device s5p_device_hdmi = { - .name = "s5p-hdmi", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_hdmi_resources), - .resource = s5p_hdmi_resources, -}; - -static struct resource s5p_sdo_resources[] = { - [0] = DEFINE_RES_MEM(S5P_PA_SDO, SZ_64K), - [1] = DEFINE_RES_IRQ(IRQ_SDO), -}; - -struct platform_device s5p_device_sdo = { - .name = "s5p-sdo", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_sdo_resources), - .resource = s5p_sdo_resources, -}; - -static struct resource s5p_mixer_resources[] = { - [0] = DEFINE_RES_MEM_NAMED(S5P_PA_MIXER, SZ_64K, "mxr"), - [1] = DEFINE_RES_MEM_NAMED(S5P_PA_VP, SZ_64K, "vp"), - [2] = DEFINE_RES_IRQ_NAMED(IRQ_MIXER, "irq"), -}; - -struct platform_device s5p_device_mixer = { - .name = "s5p-mixer", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_mixer_resources), - .resource = s5p_mixer_resources, - .dev = { - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; -#endif /* CONFIG_S5P_DEV_TV */ - /* USB */ #ifdef CONFIG_S3C_DEV_USB_HOST diff --git a/arch/arm/plat-samsung/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h deleted file mode 100644 index a5708bf84b3a..000000000000 --- a/arch/arm/plat-samsung/include/plat/camport.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * S5P series camera interface helper functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_SAMSUNG_CAMPORT_H_ -#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__ - -enum s5p_camport_id { - S5P_CAMPORT_A, - S5P_CAMPORT_B, -}; - -/* - * The helper functions to configure GPIO for the camera parallel bus. - * The camera port can be multiplexed with any FIMC entity, even multiple - * FIMC entities are allowed to be attached to a single port simultaneously. - * These functions are to be used in the board setup code. - */ -int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); -int exynos4_fimc_setup_gpio(enum s5p_camport_id id); - -#endif /* __PLAT_SAMSUNG_CAMPORT_H */ diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h deleted file mode 100644 index 50a8ca7c3760..000000000000 --- a/arch/arm/plat-samsung/include/plat/clock-clksrc.h +++ /dev/null @@ -1,83 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h - * - * Parts taken from arch/arm/plat-s3c64xx/clock.c - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Copyright 2009 Ben Dooks <ben-linux@fluff.org> - * Copyright 2009 Harald Welte - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/** - * struct clksrc_sources - list of sources for a given clock - * @sources: array of pointers to clocks - * @nr_sources: The size of @sources - */ -struct clksrc_sources { - unsigned int nr_sources; - struct clk **sources; -}; - -/** - * struct clksrc_reg - register definition for clock control bits - * @reg: pointer to the register in virtual memory. - * @shift: the shift in bits to where the bitfield is. - * @size: the size in bits of the bitfield. - * - * This specifies the size and position of the bits we are interested - * in within the register specified by @reg. - */ -struct clksrc_reg { - void __iomem *reg; - unsigned short shift; - unsigned short size; -}; - -/** - * struct clksrc_clk - class of clock for newer style samsung devices. - * @clk: the standard clock representation - * @sources: the sources for this clock - * @reg_src: the register definition for selecting the clock's source - * @reg_div: the register definition for the clock's output divisor - * - * This clock implements the features required by the newer SoCs where - * the standard clock block provides an input mux and a post-mux divisor - * to provide the periperhal's clock. - * - * The array of @sources provides the mapping of mux position to the - * clock, and @reg_src shows the code where to modify to change the mux - * position. The @reg_div defines how to change the divider settings on - * the output. - */ -struct clksrc_clk { - struct clk clk; - struct clksrc_sources *sources; - - struct clksrc_reg reg_src; - struct clksrc_reg reg_div; -}; - -/** - * s3c_set_clksrc() - setup the clock from the register settings - * @clk: The clock to setup. - * @announce: true to announce the setting to printk(). - * - * Setup the clock from the current register settings, for when the - * kernel boots or if it is resuming from a possibly unknown state. - */ -extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce); - -/** - * s3c_register_clksrc() register clocks from an array of clksrc clocks - * @srcs: The array of clocks to register - * @size: The size of the @srcs array. - * - * Initialise and register the array of clocks described by @srcs. - */ -extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size); diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h deleted file mode 100644 index 63239f409807..000000000000 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ /dev/null @@ -1,152 +0,0 @@ -/* linux/arch/arm/plat-s3c/include/plat/clock.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Written by Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_CLOCK_H -#define __ASM_PLAT_CLOCK_H __FILE__ - -#include <linux/spinlock.h> -#include <linux/clkdev.h> - -struct clk; - -/** - * struct clk_ops - standard clock operations - * @set_rate: set the clock rate, see clk_set_rate(). - * @get_rate: get the clock rate, see clk_get_rate(). - * @round_rate: round a given clock rate, see clk_round_rate(). - * @set_parent: set the clock's parent, see clk_set_parent(). - * - * Group the common clock implementations together so that we - * don't have to keep setting the same fields again. We leave - * enable in struct clk. - * - * Adding an extra layer of indirection into the process should - * not be a problem as it is unlikely these operations are going - * to need to be called quickly. - */ -struct clk_ops { - int (*set_rate)(struct clk *c, unsigned long rate); - unsigned long (*get_rate)(struct clk *c); - unsigned long (*round_rate)(struct clk *c, unsigned long rate); - int (*set_parent)(struct clk *c, struct clk *parent); -}; - -struct clk { - struct list_head list; - struct module *owner; - struct clk *parent; - const char *name; - const char *devname; - int id; - int usage; - unsigned long rate; - unsigned long ctrlbit; - - struct clk_ops *ops; - int (*enable)(struct clk *, int enable); - struct clk_lookup lookup; -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -/* other clocks which may be registered by board support */ - -extern struct clk s3c24xx_dclk0; -extern struct clk s3c24xx_dclk1; -extern struct clk s3c24xx_clkout0; -extern struct clk s3c24xx_clkout1; -extern struct clk s3c24xx_uclk; - -extern struct clk clk_usb_bus; - -/* core clock support */ - -extern struct clk clk_f; -extern struct clk clk_h; -extern struct clk clk_p; -extern struct clk clk_mpll; -extern struct clk clk_upll; -extern struct clk clk_epll; -extern struct clk clk_xtal; -extern struct clk clk_ext; - -/* S3C2443/S3C2416 specific clocks */ -extern struct clksrc_clk clk_epllref; -extern struct clksrc_clk clk_esysclk; - -/* S3C24XX UART clocks */ -extern struct clk s3c24xx_clk_uart0; -extern struct clk s3c24xx_clk_uart1; -extern struct clk s3c24xx_clk_uart2; - -/* S3C64XX specific clocks */ -extern struct clk clk_h2; -extern struct clk clk_27m; -extern struct clk clk_48m; -extern struct clk clk_xusbxti; - -extern int clk_default_setrate(struct clk *clk, unsigned long rate); -extern struct clk_ops clk_ops_def_setrate; - -/* exports for arch/arm/mach-s3c2410 - * - * Please DO NOT use these outside of arch/arm/mach-s3c2410 -*/ - -extern spinlock_t clocks_lock; - -extern int s3c2410_clkcon_enable(struct clk *clk, int enable); - -extern int s3c24xx_register_clock(struct clk *clk); -extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); - -extern void s3c_register_clocks(struct clk *clk, int nr_clks); -extern void s3c_disable_clocks(struct clk *clkp, int nr_clks); - -extern int s3c24xx_register_baseclocks(unsigned long xtal); - -extern void s5p_register_clocks(unsigned long xtal_freq); - -extern void s3c24xx_setup_clocks(unsigned long fclk, - unsigned long hclk, - unsigned long pclk); - -extern void s3c2410_setup_clocks(void); -extern void s3c2412_setup_clocks(void); -extern void s3c244x_setup_clocks(void); - -/* S3C2410 specific clock functions */ - -extern int s3c2410_baseclk_add(void); - -/* S3C2443/S3C2416 specific clock functions */ - -typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); - -extern void s3c2443_common_setup_clocks(pll_fn get_mpll); -extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask); - -extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); -extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); -extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); - -/* S3C64XX specific functions and clocks */ - -extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); - -/* Global watchdog clock used by arch_wtd_reset() callback */ - -extern struct clk *s3c2410_wdtclk; - -#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 72d4178ad23b..317c52303288 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -140,7 +140,6 @@ struct s3c_cpufreq_config { * any frequency changes. This is really only need by devices like the * S3C2410 where there is no or limited divider between the PLL and the * ARMCLK. - * @resume_clocks: Update the clocks on resume. * @get_iotiming: Get the current IO timing data, mainly for use at start. * @set_iotiming: Update the IO timings from the cached copies calculated * from the @calc_iotiming entry when changing the frequency. @@ -169,8 +168,6 @@ struct s3c_cpufreq_info { /* driver routines */ - void (*resume_clocks)(void); - int (*get_iotiming)(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *timings); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 5a237db9f9eb..61d14f3a0426 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -33,13 +33,6 @@ extern unsigned long samsung_cpu_id; #define S3C6410_CPU_ID 0x36410000 #define S3C64XX_CPU_MASK 0xFFFFF000 -#define S5P6440_CPU_ID 0x56440000 -#define S5P6450_CPU_ID 0x36450000 -#define S5P64XX_CPU_MASK 0xFFFFF000 - -#define S5PC100_CPU_ID 0x43100000 -#define S5PC100_CPU_MASK 0xFFFFF000 - #define S5PV210_CPU_ID 0x43110000 #define S5PV210_CPU_MASK 0xFFFFF000 @@ -54,10 +47,6 @@ IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK) IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK) IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK) IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK) -IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) -IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) -IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) -IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ @@ -86,30 +75,6 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) # define soc_is_s3c64xx() 0 #endif -#if defined(CONFIG_CPU_S5P6440) -# define soc_is_s5p6440() is_samsung_s5p6440() -#else -# define soc_is_s5p6440() 0 -#endif - -#if defined(CONFIG_CPU_S5P6450) -# define soc_is_s5p6450() is_samsung_s5p6450() -#else -# define soc_is_s5p6450() 0 -#endif - -#if defined(CONFIG_CPU_S5PC100) -# define soc_is_s5pc100() is_samsung_s5pc100() -#else -# define soc_is_s5pc100() 0 -#endif - -#if defined(CONFIG_CPU_S5PV210) -# define soc_is_s5pv210() is_samsung_s5pv210() -#else -# define soc_is_s5pv210() 0 -#endif - #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef KHZ @@ -145,12 +110,9 @@ extern void s3c_init_cpu(unsigned long idcode, /* core initialisation functions */ -extern void s5p_init_irq(u32 *vic, u32 num_vic); - extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); extern void s3c64xx_init_cpu(void); -extern void s5p_init_cpu(void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); @@ -177,9 +139,5 @@ extern struct bus_type s3c2440_subsys; extern struct bus_type s3c2442_subsys; extern struct bus_type s3c2443_subsys; extern struct bus_type s3c6410_subsys; -extern struct bus_type s5p64x0_subsys; -extern struct bus_type s5pv210_subsys; - -extern void (*s5pc1xx_idle)(void); #endif diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index eece188ed188..e23fed311e5f 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -25,9 +25,6 @@ struct s3c24xx_uart_resources { extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; extern struct s3c24xx_uart_resources s3c64xx_uart_resources[]; -extern struct s3c24xx_uart_resources s5p_uart_resources[]; -extern struct s3c24xx_uart_resources exynos4_uart_resources[]; -extern struct s3c24xx_uart_resources exynos5_uart_resources[]; extern struct platform_device *s3c24xx_uart_devs[]; extern struct platform_device *s3c24xx_uart_src[]; @@ -75,62 +72,6 @@ extern struct platform_device s3c_device_usb_hsotg; extern struct platform_device s3c_device_usb_hsudc; extern struct platform_device s3c_device_wdt; -extern struct platform_device s5p_device_fimc0; -extern struct platform_device s5p_device_fimc1; -extern struct platform_device s5p_device_fimc2; -extern struct platform_device s5p_device_fimc3; -extern struct platform_device s5p_device_fimc_md; -extern struct platform_device s5p_device_jpeg; -extern struct platform_device s5p_device_g2d; -extern struct platform_device s5p_device_fimd0; -extern struct platform_device s5p_device_hdmi; -extern struct platform_device s5p_device_i2c_hdmiphy; -extern struct platform_device s5p_device_mfc; -extern struct platform_device s5p_device_mfc_l; -extern struct platform_device s5p_device_mfc_r; -extern struct platform_device s5p_device_mipi_csis0; -extern struct platform_device s5p_device_mipi_csis1; -extern struct platform_device s5p_device_mixer; -extern struct platform_device s5p_device_onenand; -extern struct platform_device s5p_device_sdo; - -extern struct platform_device s5p6440_device_iis; -extern struct platform_device s5p6440_device_pcm; - -extern struct platform_device s5p6450_device_iis0; -extern struct platform_device s5p6450_device_iis1; -extern struct platform_device s5p6450_device_iis2; -extern struct platform_device s5p6450_device_pcm0; - - -extern struct platform_device s5pc100_device_ac97; -extern struct platform_device s5pc100_device_iis0; -extern struct platform_device s5pc100_device_iis1; -extern struct platform_device s5pc100_device_iis2; -extern struct platform_device s5pc100_device_pcm0; -extern struct platform_device s5pc100_device_pcm1; -extern struct platform_device s5pc100_device_spdif; - -extern struct platform_device s5pv210_device_ac97; -extern struct platform_device s5pv210_device_iis0; -extern struct platform_device s5pv210_device_iis1; -extern struct platform_device s5pv210_device_iis2; -extern struct platform_device s5pv210_device_pcm0; -extern struct platform_device s5pv210_device_pcm1; -extern struct platform_device s5pv210_device_pcm2; -extern struct platform_device s5pv210_device_spdif; - -extern struct platform_device exynos4_device_ac97; -extern struct platform_device exynos4_device_ahci; -extern struct platform_device exynos4_device_i2s0; -extern struct platform_device exynos4_device_i2s1; -extern struct platform_device exynos4_device_i2s2; -extern struct platform_device exynos4_device_ohci; -extern struct platform_device exynos4_device_pcm0; -extern struct platform_device exynos4_device_pcm1; -extern struct platform_device exynos4_device_pcm2; -extern struct platform_device exynos4_device_spdif; - extern struct platform_device samsung_asoc_idma; extern struct platform_device samsung_device_keypad; extern struct platform_device samsung_device_pwm; diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h index 6abcbf139cee..bca383efcf6d 100644 --- a/arch/arm/plat-samsung/include/plat/fb-core.h +++ b/arch/arm/plat-samsung/include/plat/fb-core.h @@ -26,19 +26,4 @@ static inline void s3c_fb_setname(char *name) #endif } -/* Re-define device name depending on support. */ -static inline void s5p_fb_setname(int id, char *name) -{ - switch (id) { -#ifdef CONFIG_S5P_DEV_FIMD0 - case 0: - s5p_device_fimd0.name = name; - break; -#endif - default: - printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id); - break; - } -} - #endif /* __ASM_PLAT_FB_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 9ae507270785..b89f8f208515 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -26,46 +26,10 @@ extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); /** - * s5p_fimd0_set_platdata() - Setup the FB device with platform data. - * @pd: The platform data to set. The data is copied from the passed structure - * so the machine data can mark the data __initdata so that any unused - * machines will end up dumping their data at runtime. - */ -extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd); - -/** * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD * * Initialise the GPIO for an 24bpp LCD display on the RGB interface. */ extern void s3c64xx_fb_gpio_setup_24bpp(void); -/** - * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD - * - * Initialise the GPIO for an 24bpp LCD display on the RGB interface. - */ -extern void s5pc100_fb_gpio_setup_24bpp(void); - -/** - * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD - * - * Initialise the GPIO for an 24bpp LCD display on the RGB interface. - */ -extern void s5pv210_fb_gpio_setup_24bpp(void); - -/** - * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0 - * - * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0. - */ -extern void exynos4_fimd0_gpio_setup_24bpp(void); - -/** - * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD - * - * Initialise the GPIO for an 24bpp LCD display on the RGB interface. - */ -extern void s5p64x0_fb_gpio_setup_24bpp(void); - #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h deleted file mode 100644 index 1d6cb2b8b094..000000000000 --- a/arch/arm/plat-samsung/include/plat/fimc-core.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * arch/arm/plat-samsung/include/plat/fimc-core.h - * - * Copyright 2010 Samsung Electronics Co., Ltd. - * Sylwester Nawrocki <s.nawrocki@samsung.com> - * - * Samsung camera interface driver core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_PLAT_FIMC_CORE_H -#define __ASM_PLAT_FIMC_CORE_H __FILE__ - -/* - * These functions are only for use with the core support code, such as - * the CPU-specific initialization code. - */ - -/* Re-define device name to differentiate the subsystem in various SoCs. */ -static inline void s3c_fimc_setname(int id, char *name) -{ - switch (id) { -#ifdef CONFIG_S5P_DEV_FIMC0 - case 0: - s5p_device_fimc0.name = name; - break; -#endif -#ifdef CONFIG_S5P_DEV_FIMC1 - case 1: - s5p_device_fimc1.name = name; - break; -#endif -#ifdef CONFIG_S5P_DEV_FIMC2 - case 2: - s5p_device_fimc2.name = name; - break; -#endif -#ifdef CONFIG_S5P_DEV_FIMC3 - case 3: - s5p_device_fimc3.name = name; - break; -#endif - default: - break; - } -} - -#endif /* __ASM_PLAT_FIMC_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 08740eed050c..b5294eff18b5 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -27,7 +27,6 @@ #include <linux/types.h> typedef unsigned int __bitwise__ samsung_gpio_pull_t; -typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; /* forward declaration if gpio-core.h hasn't been included */ struct samsung_gpio_chip; @@ -180,67 +179,4 @@ static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size, return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE); } -/* Define values for the drvstr available for each gpio pin. - * - * These values control the value of the output signal driver strength, - * configurable on most pins on the S5P series. - */ -#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x0) -#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x2) -#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x1) -#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x3) - -/** - * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin - * @pin: The pin number to get the settings for - * - * Read the driver streght value for the specified pin. -*/ -extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); - -/** - * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin - * @pin: The pin number to configure the driver streght value - * @drvstr: The new value of the driver strength - * - * This function sets the driver strength value for the specified pin. - * It will return 0 if successful, or a negative error code if the pin - * cannot support the requested setting. -*/ -extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); - -/** - * s5p_register_gpio_interrupt() - register interrupt support for a gpio group - * @pin: The pin number from the group to be registered - * - * This function registers gpio interrupt support for the group that the - * specified pin belongs to. - * - * The total number of gpio pins is quite large ob s5p series. Registering - * irq support for all of them would be a resource waste. Because of that the - * interrupt support for standard gpio pins is registered dynamically. - * - * It will return the irq number of the interrupt that has been registered - * or -ENOMEM if no more gpio interrupts can be registered. It is allowed - * to call this function more than once for the same gpio group (the group - * will be registered only once). - */ -extern int s5p_register_gpio_interrupt(int pin); - -/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt - * registration (see s5p_register_gpio_interrupt function) - * @chain_irq: chained irq number for the gpio int handler for this bank - * @start: start gpio group number of this bank - * @nr_groups: number of gpio groups handled by this bank - * - * This functions registers initial information about gpio banks that - * can be later used by the s5p_register_gpio_interrupt() function to - * enable support for gpio interrupt for particular gpio group. - */ -#ifdef CONFIG_S5P_GPIO_INT -extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups); -#else -#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0) -#endif - #endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index cf5aae5b0975..6ce11bfdc37e 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -14,6 +14,9 @@ #ifndef __PLAT_SAMSUNG_GPIO_CORE_H #define __PLAT_SAMSUNG_GPIO_CORE_H +/* Bring in machine-local definitions, especially S3C_GPIO_END */ +#include <mach/gpio-samsung.h> + #define GPIOCON_OFF (0x00) #define GPIODAT_OFF (0x04) diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h deleted file mode 100644 index 331d046ac2c5..000000000000 --- a/arch/arm/plat-samsung/include/plat/hdmi.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics Co.Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_SAMSUNG_HDMI_H -#define __PLAT_SAMSUNG_HDMI_H __FILE__ - -extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, - struct i2c_board_info *mhl_info, int mhl_bus); - -#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h deleted file mode 100644 index 039001c0ef05..000000000000 --- a/arch/arm/plat-samsung/include/plat/irqs.h +++ /dev/null @@ -1,72 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/irqs.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P Common IRQ support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_SAMSUNG_IRQS_H -#define __PLAT_SAMSUNG_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - * - * note, since we're using the VICs, our start must be a - * mulitple of 32 to allow the common code to work - */ - -#define S5P_IRQ_OFFSET (32) - -#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET) - -#define S5P_VIC0_BASE S5P_IRQ(0) -#define S5P_VIC1_BASE S5P_IRQ(32) -#define S5P_VIC2_BASE S5P_IRQ(64) -#define S5P_VIC3_BASE S5P_IRQ(96) - -#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32)) - -#define IRQ_VIC0_BASE S5P_VIC0_BASE -#define IRQ_VIC1_BASE S5P_VIC1_BASE -#define IRQ_VIC2_BASE S5P_VIC2_BASE - -/* VIC based IRQs */ - -#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) -#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x)) -#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) -#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) - -#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ - : ((x) - 16 + S5P_EINT_BASE2)) - -#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \ - ((irq) - S5P_EINT_BASE1) : \ - ((irq) + 16 - S5P_EINT_BASE2)) - -#define IRQ_EINT_BIT(x) EINT_OFFSET(x) - -/* Typically only a few gpio chips require gpio interrupt support. - To avoid memory waste irq descriptors are allocated only for - S5P_GPIOINT_GROUP_COUNT chips, each with total number of - S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged - to any gpio chip with the s5p_register_gpio_interrupt() function */ -#define S5P_GPIOINT_GROUP_COUNT 4 -#define S5P_GPIOINT_GROUP_SIZE 8 -#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE) - -/* IRQ types common for all s5p platforms */ -#define S5P_IRQ_TYPE_LEVEL_LOW (0x00) -#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01) -#define S5P_IRQ_TYPE_EDGE_FALLING (0x02) -#define S5P_IRQ_TYPE_EDGE_RISING (0x03) -#define S5P_IRQ_TYPE_EDGE_BOTH (0x04) - -#endif /* __PLAT_SAMSUNG_IRQS_H */ diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h deleted file mode 100644 index 033654e91e22..000000000000 --- a/arch/arm/plat-samsung/include/plat/mfc.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_SAMSUNG_MFC_H -#define __PLAT_SAMSUNG_MFC_H __FILE__ - -struct s5p_mfc_dt_meminfo { - unsigned long loff; - unsigned long lsize; - unsigned long roff; - unsigned long rsize; - char *compatible; -}; - -/** - * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver - * @rbase: base address for MFC 'right' memory interface - * @rsize: size of the memory reserved for MFC 'right' interface - * @lbase: base address for MFC 'left' memory interface - * @lsize: size of the memory reserved for MFC 'left' interface - * - * This function reserves system memory for both MFC device memory - * interfaces and registers it to respective struct device entries as - * coherent memory. - */ -void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, - phys_addr_t lbase, unsigned int lsize); - -#endif /* __PLAT_SAMSUNG_MFC_H */ diff --git a/arch/arm/plat-samsung/include/plat/pll.h b/arch/arm/plat-samsung/include/plat/pll.h deleted file mode 100644 index 357af7c1c664..000000000000 --- a/arch/arm/plat-samsung/include/plat/pll.h +++ /dev/null @@ -1,323 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/pll.h - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung PLL codes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <asm/div64.h> - -#define S3C24XX_PLL_MDIV_MASK (0xFF) -#define S3C24XX_PLL_PDIV_MASK (0x1F) -#define S3C24XX_PLL_SDIV_MASK (0x3) -#define S3C24XX_PLL_MDIV_SHIFT (12) -#define S3C24XX_PLL_PDIV_SHIFT (4) -#define S3C24XX_PLL_SDIV_SHIFT (0) - -static inline unsigned int s3c24xx_get_pll(unsigned int pllval, - unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK; - pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK; - sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#define S3C2416_PLL_MDIV_MASK (0x3FF) -#define S3C2416_PLL_PDIV_MASK (0x3F) -#define S3C2416_PLL_SDIV_MASK (0x7) -#define S3C2416_PLL_MDIV_SHIFT (14) -#define S3C2416_PLL_PDIV_SHIFT (5) -#define S3C2416_PLL_SDIV_SHIFT (0) - -static inline unsigned int s3c2416_get_pll(unsigned int pllval, - unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK; - pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK; - sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK; - - fvco = (uint64_t)baseclk * mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned int)fvco; -} - -#define S3C6400_PLL_MDIV_MASK (0x3FF) -#define S3C6400_PLL_PDIV_MASK (0x3F) -#define S3C6400_PLL_SDIV_MASK (0x7) -#define S3C6400_PLL_MDIV_SHIFT (16) -#define S3C6400_PLL_PDIV_SHIFT (8) -#define S3C6400_PLL_SDIV_SHIFT (0) - -static inline unsigned long s3c6400_get_pll(unsigned long baseclk, - u32 pllcon) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; - pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; - sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -#define PLL6553X_MDIV_MASK (0x7F) -#define PLL6553X_PDIV_MASK (0x1F) -#define PLL6553X_SDIV_MASK (0x3) -#define PLL6553X_KDIV_MASK (0xFFFF) -#define PLL6553X_MDIV_SHIFT (16) -#define PLL6553X_PDIV_SHIFT (8) -#define PLL6553X_SDIV_SHIFT (0) - -static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, - u32 pll_con0, u32 pll_con1) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; - pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; - sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; - kdiv = pll_con1 & PLL6553X_KDIV_MASK; - - /* - * We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} - -#define PLL35XX_MDIV_MASK (0x3FF) -#define PLL35XX_PDIV_MASK (0x3F) -#define PLL35XX_SDIV_MASK (0x7) -#define PLL35XX_MDIV_SHIFT (16) -#define PLL35XX_PDIV_SHIFT (8) -#define PLL35XX_SDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; - pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; - sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -#define PLL36XX_KDIV_MASK (0xFFFF) -#define PLL36XX_MDIV_MASK (0x1FF) -#define PLL36XX_PDIV_MASK (0x3F) -#define PLL36XX_SDIV_MASK (0x7) -#define PLL36XX_MDIV_SHIFT (16) -#define PLL36XX_PDIV_SHIFT (8) -#define PLL36XX_SDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll36xx(unsigned long baseclk, - u32 pll_con0, u32 pll_con1) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; - pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; - sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; - kdiv = pll_con1 & PLL36XX_KDIV_MASK; - - tmp = baseclk; - - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} - -#define PLL45XX_MDIV_MASK (0x3FF) -#define PLL45XX_PDIV_MASK (0x3F) -#define PLL45XX_SDIV_MASK (0x7) -#define PLL45XX_MDIV_SHIFT (16) -#define PLL45XX_PDIV_SHIFT (8) -#define PLL45XX_SDIV_SHIFT (0) - -enum pll45xx_type_t { - pll_4500, - pll_4502, - pll_4508 -}; - -static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, - enum pll45xx_type_t pll_type) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; - pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; - sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; - - if (pll_type == pll_4508) - sdiv = sdiv - 1; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -/* CON0 bit-fields */ -#define PLL46XX_MDIV_MASK (0x1FF) -#define PLL46XX_PDIV_MASK (0x3F) -#define PLL46XX_SDIV_MASK (0x7) -#define PLL46XX_LOCKED_SHIFT (29) -#define PLL46XX_MDIV_SHIFT (16) -#define PLL46XX_PDIV_SHIFT (8) -#define PLL46XX_SDIV_SHIFT (0) - -/* CON1 bit-fields */ -#define PLL46XX_MRR_MASK (0x1F) -#define PLL46XX_MFR_MASK (0x3F) -#define PLL46XX_KDIV_MASK (0xFFFF) -#define PLL4650C_KDIV_MASK (0xFFF) -#define PLL46XX_MRR_SHIFT (24) -#define PLL46XX_MFR_SHIFT (16) -#define PLL46XX_KDIV_SHIFT (0) - -enum pll46xx_type_t { - pll_4600, - pll_4650, - pll_4650c, -}; - -static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, - u32 pll_con0, u32 pll_con1, - enum pll46xx_type_t pll_type) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; - pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; - sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; - kdiv = pll_con1 & PLL46XX_KDIV_MASK; - - if (pll_type == pll_4650c) - kdiv = pll_con1 & PLL4650C_KDIV_MASK; - else - kdiv = pll_con1 & PLL46XX_KDIV_MASK; - - tmp = baseclk; - - if (pll_type == pll_4600) { - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - } else { - tmp *= (mdiv << 10) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 10; - } - - return result; -} - -#define PLL90XX_MDIV_MASK (0xFF) -#define PLL90XX_PDIV_MASK (0x3F) -#define PLL90XX_SDIV_MASK (0x7) -#define PLL90XX_KDIV_MASK (0xffff) -#define PLL90XX_LOCKED_SHIFT (29) -#define PLL90XX_MDIV_SHIFT (16) -#define PLL90XX_PDIV_SHIFT (8) -#define PLL90XX_SDIV_SHIFT (0) -#define PLL90XX_KDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, - u32 pll_con, u32 pll_conk) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK; - pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK; - sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; - kdiv = pll_conk & PLL90XX_KDIV_MASK; - - /* - * We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} - -#define PLL65XX_MDIV_MASK (0x3FF) -#define PLL65XX_PDIV_MASK (0x3F) -#define PLL65XX_SDIV_MASK (0x7) -#define PLL65XX_MDIV_SHIFT (16) -#define PLL65XX_PDIV_SHIFT (8) -#define PLL65XX_SDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK; - pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK; - sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h deleted file mode 100644 index 8364b4bea8b8..000000000000 --- a/arch/arm/plat-samsung/include/plat/s5p-clock.h +++ /dev/null @@ -1,65 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for s5p clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_CLOCK_H -#define __ASM_PLAT_S5P_CLOCK_H __FILE__ - -#include <linux/clk.h> - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_bpll clk_ext_xtal_mux -#define clk_fin_cpll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux -#define clk_fin_dpll clk_ext_xtal_mux -#define clk_fin_vpll clk_ext_xtal_mux -#define clk_fin_hpll clk_ext_xtal_mux - -extern struct clk clk_ext_xtal_mux; -extern struct clk clk_xusbxti; -extern struct clk clk_48m; -extern struct clk s5p_clk_27m; -extern struct clk clk_fout_apll; -extern struct clk clk_fout_bpll; -extern struct clk clk_fout_bpll_div2; -extern struct clk clk_fout_cpll; -extern struct clk clk_fout_mpll; -extern struct clk clk_fout_mpll_div2; -extern struct clk clk_fout_epll; -extern struct clk clk_fout_dpll; -extern struct clk clk_fout_vpll; -extern struct clk clk_arm; -extern struct clk clk_vpll; - -extern struct clksrc_sources clk_src_apll; -extern struct clksrc_sources clk_src_bpll; -extern struct clksrc_sources clk_src_bpll_fout; -extern struct clksrc_sources clk_src_cpll; -extern struct clksrc_sources clk_src_mpll; -extern struct clksrc_sources clk_src_mpll_fout; -extern struct clksrc_sources clk_src_epll; -extern struct clksrc_sources clk_src_dpll; - -extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); - -/* Common EPLL operations for S5P platform */ -extern int s5p_epll_enable(struct clk *clk, int enable); -extern unsigned long s5p_epll_get_rate(struct clk *clk); - -/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */ -extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate); -extern unsigned long s5p_spdif_get_rate(struct clk *clk); - -extern struct clk_ops s5p_sclk_spdif_ops; -#endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index bf650218b40e..2787553c3ae2 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -56,22 +56,7 @@ extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w); -extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w); -extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w); -extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); -extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); -extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); -extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); -extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); -extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w); -extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w); -extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w); -extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); -extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w); -extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w); -extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w); -extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w); /* S3C2416 SDHCI setup */ @@ -151,115 +136,6 @@ static inline void s3c6400_default_sdhci2(void) { } #endif /* CONFIG_S3C64XX_SETUP_SDHCI */ -/* S5P64X0 SDHCI setup */ - -#ifdef CONFIG_S5P64X0_SETUP_SDHCI_GPIO -static inline void s5p64x0_default_sdhci0(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio; -#endif -} - -static inline void s5p64x0_default_sdhci1(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio; -#endif -} - -static inline void s5p6440_default_sdhci2(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio; -#endif -} - -static inline void s5p6450_default_sdhci2(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio; -#endif -} - -#else -static inline void s5p64x0_default_sdhci0(void) { } -static inline void s5p64x0_default_sdhci1(void) { } -static inline void s5p6440_default_sdhci2(void) { } -static inline void s5p6450_default_sdhci2(void) { } - -#endif /* CONFIG_S5P64X0_SETUP_SDHCI_GPIO */ - -/* S5PC100 SDHCI setup */ - -#ifdef CONFIG_S5PC100_SETUP_SDHCI -static inline void s5pc100_default_sdhci0(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; -#endif -} - -static inline void s5pc100_default_sdhci1(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; -#endif -} - -static inline void s5pc100_default_sdhci2(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; -#endif -} - -#else -static inline void s5pc100_default_sdhci0(void) { } -static inline void s5pc100_default_sdhci1(void) { } -static inline void s5pc100_default_sdhci2(void) { } - -#endif /* CONFIG_S5PC100_SETUP_SDHCI */ - -/* S5PV210 SDHCI setup */ - -#ifdef CONFIG_S5PV210_SETUP_SDHCI -static inline void s5pv210_default_sdhci0(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio; -#endif -} - -static inline void s5pv210_default_sdhci1(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio; -#endif -} - -static inline void s5pv210_default_sdhci2(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio; -#endif -} - -static inline void s5pv210_default_sdhci3(void) -{ -#ifdef CONFIG_S3C_DEV_HSMMC3 - s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; -#endif -} - -#else -static inline void s5pv210_default_sdhci0(void) { } -static inline void s5pv210_default_sdhci1(void) { } -static inline void s5pv210_default_sdhci2(void) { } -static inline void s5pv210_default_sdhci3(void) { } - -#endif /* CONFIG_S5PV210_SETUP_SDHCI */ - static inline void s3c_sdhci_setname(int id, char *name) { switch (id) { diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h deleted file mode 100644 index 3bc34f3ce28f..000000000000 --- a/arch/arm/plat-samsung/include/plat/tv-core.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/arm/plat-samsung/include/plat/tv.h - * - * Copyright 2011 Samsung Electronics Co., Ltd. - * Tomasz Stanislawski <t.stanislaws@samsung.com> - * - * Samsung TV driver core functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SAMSUNG_PLAT_TV_H -#define __SAMSUNG_PLAT_TV_H __FILE__ - -/* - * These functions are only for use with the core support code, such as - * the CPU-specific initialization code. - */ - -/* Re-define device name to differentiate the subsystem in various SoCs. */ -static inline void s5p_hdmi_setname(char *name) -{ -#ifdef CONFIG_S5P_DEV_TV - s5p_device_hdmi.name = name; -#endif -} - -static inline void s5p_mixer_setname(char *name) -{ -#ifdef CONFIG_S5P_DEV_TV - s5p_device_mixer.name = name; -#endif -} - -static inline void s5p_sdo_setname(char *name) -{ -#ifdef CONFIG_S5P_DEV_TV - s5p_device_sdo.name = name; -#endif -} - -#endif /* __SAMSUNG_PLAT_TV_H */ diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index a1f925f3121f..11fbbc26e49f 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -30,7 +30,6 @@ #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/clock.h> static struct cpu_table *cpu; diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index da268813901b..f9a09262f2fa 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -19,9 +19,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) #include <mach/gpio-samsung.h> -#endif #include <plat/gpio-core.h> #include <plat/pm.h> @@ -196,7 +194,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = { .resume = samsung_gpio_pm_2bit_resume, }; -#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) +#if defined(CONFIG_ARCH_S3C64XX) static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -306,7 +304,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = { .save = samsung_gpio_pm_4bit_save, .resume = samsung_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ +#endif /* CONFIG_ARCH_S3C64XX */ /** * samsung_pm_save_gpio() - save gpio chip data for suspend diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c deleted file mode 100644 index 48a159911037..000000000000 --- a/arch/arm/plat-samsung/s5p-clock.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P - Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/io.h> -#include <asm/div64.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p-clock.h> - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * clk_ext_xtal_mux. -*/ -struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", - .id = -1, -}; - -struct clk clk_xusbxti = { - .name = "xusbxti", - .id = -1, - .rate = 24000000, -}; - -struct clk s5p_clk_27m = { - .name = "clk_27m", - .id = -1, - .rate = 27000000, -}; - -/* 48MHz USB Phy clock output */ -struct clk clk_48m = { - .name = "clk_48m", - .id = -1, - .rate = 48000000, -}; - -/* APLL clock output - * No need .ctrlbit, this is always on -*/ -struct clk clk_fout_apll = { - .name = "fout_apll", - .id = -1, -}; - -/* BPLL clock output */ - -struct clk clk_fout_bpll = { - .name = "fout_bpll", - .id = -1, -}; - -struct clk clk_fout_bpll_div2 = { - .name = "fout_bpll_div2", - .id = -1, -}; - -/* CPLL clock output */ - -struct clk clk_fout_cpll = { - .name = "fout_cpll", - .id = -1, -}; - -/* MPLL clock output - * No need .ctrlbit, this is always on -*/ -struct clk clk_fout_mpll = { - .name = "fout_mpll", - .id = -1, -}; - -struct clk clk_fout_mpll_div2 = { - .name = "fout_mpll_div2", - .id = -1, -}; - -/* EPLL clock output */ -struct clk clk_fout_epll = { - .name = "fout_epll", - .id = -1, - .ctrlbit = (1 << 31), -}; - -/* DPLL clock output */ -struct clk clk_fout_dpll = { - .name = "fout_dpll", - .id = -1, - .ctrlbit = (1 << 31), -}; - -/* VPLL clock output */ -struct clk clk_fout_vpll = { - .name = "fout_vpll", - .id = -1, - .ctrlbit = (1 << 31), -}; - -/* Possible clock sources for APLL Mux */ -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -struct clksrc_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -/* Possible clock sources for BPLL Mux */ -static struct clk *clk_src_bpll_list[] = { - [0] = &clk_fin_bpll, - [1] = &clk_fout_bpll, -}; - -struct clksrc_sources clk_src_bpll = { - .sources = clk_src_bpll_list, - .nr_sources = ARRAY_SIZE(clk_src_bpll_list), -}; - -static struct clk *clk_src_bpll_fout_list[] = { - [0] = &clk_fout_bpll_div2, - [1] = &clk_fout_bpll, -}; - -struct clksrc_sources clk_src_bpll_fout = { - .sources = clk_src_bpll_fout_list, - .nr_sources = ARRAY_SIZE(clk_src_bpll_fout_list), -}; - -/* Possible clock sources for CPLL Mux */ -static struct clk *clk_src_cpll_list[] = { - [0] = &clk_fin_cpll, - [1] = &clk_fout_cpll, -}; - -struct clksrc_sources clk_src_cpll = { - .sources = clk_src_cpll_list, - .nr_sources = ARRAY_SIZE(clk_src_cpll_list), -}; - -/* Possible clock sources for MPLL Mux */ -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -struct clksrc_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clk *clk_src_mpll_fout_list[] = { - [0] = &clk_fout_mpll_div2, - [1] = &clk_fout_mpll, -}; - -struct clksrc_sources clk_src_mpll_fout = { - .sources = clk_src_mpll_fout_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_fout_list), -}; - -/* Possible clock sources for EPLL Mux */ -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -struct clksrc_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -/* Possible clock sources for DPLL Mux */ -static struct clk *clk_src_dpll_list[] = { - [0] = &clk_fin_dpll, - [1] = &clk_fout_dpll, -}; - -struct clksrc_sources clk_src_dpll = { - .sources = clk_src_dpll_list, - .nr_sources = ARRAY_SIZE(clk_src_dpll_list), -}; - -struct clk clk_vpll = { - .name = "vpll", - .id = -1, -}; - -int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - con = enable ? (con | ctrlbit) : (con & ~ctrlbit); - __raw_writel(con, reg); - return 0; -} - -int s5p_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); - else - __raw_writel(epll_con, S5P_EPLL_CON); - - return 0; -} - -unsigned long s5p_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -int s5p_spdif_set_rate(struct clk *clk, unsigned long rate) -{ - struct clk *pclk; - int ret; - - pclk = clk_get_parent(clk); - if (IS_ERR(pclk)) - return -EINVAL; - - ret = pclk->ops->set_rate(pclk, rate); - clk_put(pclk); - - return ret; -} - -unsigned long s5p_spdif_get_rate(struct clk *clk) -{ - struct clk *pclk; - int rate; - - pclk = clk_get_parent(clk); - if (IS_ERR(pclk)) - return -EINVAL; - - rate = pclk->ops->get_rate(pclk); - clk_put(pclk); - - return rate; -} - -struct clk_ops s5p_sclk_spdif_ops = { - .set_rate = s5p_spdif_set_rate, - .get_rate = s5p_spdif_get_rate, -}; - -static struct clk *s5p_clks[] __initdata = { - &clk_ext_xtal_mux, - &clk_48m, - &s5p_clk_27m, - &clk_fout_apll, - &clk_fout_mpll, - &clk_fout_epll, - &clk_fout_dpll, - &clk_fout_vpll, - &clk_vpll, - &clk_xusbxti, -}; - -void __init s5p_register_clocks(unsigned long xtal_freq) -{ - int ret; - - clk_ext_xtal_mux.rate = xtal_freq; - - ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks)); - if (ret > 0) - printk(KERN_ERR "Failed to register s5p clocks\n"); -} diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index 469b86260fe3..0b04b6b0fa30 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -17,56 +17,16 @@ #include <linux/of_fdt.h> #include <linux/of.h> -#include <plat/mfc.h> - -#ifdef CONFIG_SAMSUNG_ATAGS -#include <mach/map.h> -#include <mach/irqs.h> -#include <plat/devs.h> - -static struct resource s5p_mfc_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), - [1] = DEFINE_RES_IRQ(IRQ_MFC), -}; - -struct platform_device s5p_device_mfc = { - .name = "s5p-mfc", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_mfc_resource), - .resource = s5p_mfc_resource, -}; - -/* - * MFC hardware has 2 memory interfaces which are modelled as two separate - * platform devices to let dma-mapping distinguish between them. - * - * MFC parent device (s5p_device_mfc) must be registered before memory - * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). - */ - -struct platform_device s5p_device_mfc_l = { - .name = "s5p-mfc-l", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device s5p_device_mfc_r = { - .name = "s5p-mfc-r", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; -#else static struct platform_device s5p_device_mfc_l; static struct platform_device s5p_device_mfc_r; -#endif + +struct s5p_mfc_dt_meminfo { + unsigned long loff; + unsigned long lsize; + unsigned long roff; + unsigned long rsize; + char *compatible; +}; struct s5p_mfc_reserved_mem { phys_addr_t base; @@ -77,7 +37,7 @@ struct s5p_mfc_reserved_mem { static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata; -void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, +static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, phys_addr_t lbase, unsigned int lsize) { int i; @@ -100,28 +60,6 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, } } -#ifdef CONFIG_SAMSUNG_ATAGS -static int __init s5p_mfc_memory_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) { - struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i]; - if (!area->base) - continue; - - if (dma_declare_coherent_memory(area->dev, area->base, - area->base, area->size, - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) - printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n", - area->size, (unsigned long) area->base); - } - return 0; -} -device_initcall(s5p_mfc_memory_init); -#endif - -#ifdef CONFIG_OF int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, int depth, void *data) { @@ -154,4 +92,3 @@ int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, return 1; } -#endif diff --git a/arch/arm/plat-samsung/s5p-dev-uart.c b/arch/arm/plat-samsung/s5p-dev-uart.c deleted file mode 100644 index 8c4487af98c8..000000000000 --- a/arch/arm/plat-samsung/s5p-dev-uart.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (c) 2009,2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Base S5P UART resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <mach/map.h> - -#include <plat/devs.h> - - /* Serial port registrations */ - -static struct resource s5p_uart0_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART), - [1] = DEFINE_RES_IRQ(IRQ_UART0), -}; - -static struct resource s5p_uart1_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART), - [1] = DEFINE_RES_IRQ(IRQ_UART1), -}; - -static struct resource s5p_uart2_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART), - [1] = DEFINE_RES_IRQ(IRQ_UART2), -}; - -static struct resource s5p_uart3_resource[] = { -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 - [0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART), - [1] = DEFINE_RES_IRQ(IRQ_UART3), -#endif -}; - -static struct resource s5p_uart4_resource[] = { -#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 - [0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART), - [1] = DEFINE_RES_IRQ(IRQ_UART4), -#endif -}; - -static struct resource s5p_uart5_resource[] = { -#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 - [0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART), - [1] = DEFINE_RES_IRQ(IRQ_UART5), -#endif -}; - -struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { - [0] = { - .resources = s5p_uart0_resource, - .nr_resources = ARRAY_SIZE(s5p_uart0_resource), - }, - [1] = { - .resources = s5p_uart1_resource, - .nr_resources = ARRAY_SIZE(s5p_uart1_resource), - }, - [2] = { - .resources = s5p_uart2_resource, - .nr_resources = ARRAY_SIZE(s5p_uart2_resource), - }, - [3] = { - .resources = s5p_uart3_resource, - .nr_resources = ARRAY_SIZE(s5p_uart3_resource), - }, - [4] = { - .resources = s5p_uart4_resource, - .nr_resources = ARRAY_SIZE(s5p_uart4_resource), - }, - [5] = { - .resources = s5p_uart5_resource, - .nr_resources = ARRAY_SIZE(s5p_uart5_resource), - }, -}; diff --git a/arch/arm/plat-samsung/s5p-irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c deleted file mode 100644 index ebee4dc11a94..000000000000 --- a/arch/arm/plat-samsung/s5p-irq-eint.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P - IRQ EINT support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/device.h> -#include <linux/gpio.h> -#include <linux/irqchip/arm-vic.h> -#include <linux/of.h> - -#include <plat/regs-irqtype.h> - -#include <mach/map.h> -#include <plat/cpu.h> -#include <plat/pm.h> - -#include <plat/gpio-cfg.h> -#include <mach/regs-gpio.h> - -static inline void s5p_irq_eint_mask(struct irq_data *data) -{ - u32 mask; - - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask |= eint_irq_to_bit(data->irq); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); -} - -static void s5p_irq_eint_unmask(struct irq_data *data) -{ - u32 mask; - - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask &= ~(eint_irq_to_bit(data->irq)); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); -} - -static inline void s5p_irq_eint_ack(struct irq_data *data) -{ - __raw_writel(eint_irq_to_bit(data->irq), - S5P_EINT_PEND(EINT_REG_NR(data->irq))); -} - -static void s5p_irq_eint_maskack(struct irq_data *data) -{ - /* compiler should in-line these */ - s5p_irq_eint_mask(data); - s5p_irq_eint_ack(data); -} - -static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = EINT_OFFSET(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - newvalue = S5P_IRQ_TYPE_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S5P_IRQ_TYPE_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S5P_IRQ_TYPE_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S5P_IRQ_TYPE_LEVEL_LOW; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs & 0x7) * 4; - mask = 0x7 << shift; - - ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq))); - ctrl &= ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq))); - - if ((0 <= offs) && (offs < 8)) - s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); - - else if ((8 <= offs) && (offs < 16)) - s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); - - else if ((16 <= offs) && (offs < 24)) - s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); - - else if ((24 <= offs) && (offs < 32)) - s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); - - else - printk(KERN_ERR "No such irq number %d", offs); - - return 0; -} - -static struct irq_chip s5p_irq_eint = { - .name = "s5p-eint", - .irq_mask = s5p_irq_eint_mask, - .irq_unmask = s5p_irq_eint_unmask, - .irq_mask_ack = s5p_irq_eint_maskack, - .irq_ack = s5p_irq_eint_ack, - .irq_set_type = s5p_irq_eint_set_type, -#ifdef CONFIG_PM - .irq_set_wake = s3c_irqext_wake, -#endif -}; - -/* s5p_irq_demux_eint - * - * This function demuxes the IRQ from the group0 external interrupts, - * from EINTs 16 to 31. It is designed to be inlined into the specific - * handler s5p_irq_demux_eintX_Y. - * - * Each EINT pend/mask registers handle eight of them. - */ -static inline void s5p_irq_demux_eint(unsigned int start) -{ - u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); - u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); - unsigned int irq; - - status &= ~mask; - status &= 0xff; - - while (status) { - irq = fls(status) - 1; - generic_handle_irq(irq + start); - status &= ~(1 << irq); - } -} - -static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) -{ - s5p_irq_demux_eint(IRQ_EINT(16)); - s5p_irq_demux_eint(IRQ_EINT(24)); -} - -static inline void s5p_irq_vic_eint_mask(struct irq_data *data) -{ - void __iomem *base = irq_data_get_irq_chip_data(data); - - s5p_irq_eint_mask(data); - writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR); -} - -static void s5p_irq_vic_eint_unmask(struct irq_data *data) -{ - void __iomem *base = irq_data_get_irq_chip_data(data); - - s5p_irq_eint_unmask(data); - writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE); -} - -static inline void s5p_irq_vic_eint_ack(struct irq_data *data) -{ - __raw_writel(eint_irq_to_bit(data->irq), - S5P_EINT_PEND(EINT_REG_NR(data->irq))); -} - -static void s5p_irq_vic_eint_maskack(struct irq_data *data) -{ - s5p_irq_vic_eint_mask(data); - s5p_irq_vic_eint_ack(data); -} - -static struct irq_chip s5p_irq_vic_eint = { - .name = "s5p_vic_eint", - .irq_mask = s5p_irq_vic_eint_mask, - .irq_unmask = s5p_irq_vic_eint_unmask, - .irq_mask_ack = s5p_irq_vic_eint_maskack, - .irq_ack = s5p_irq_vic_eint_ack, - .irq_set_type = s5p_irq_eint_set_type, -#ifdef CONFIG_PM - .irq_set_wake = s3c_irqext_wake, -#endif -}; - -static int __init s5p_init_irq_eint(void) -{ - int irq; - - if (of_have_populated_dt()) - return -ENODEV; - - for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++) - irq_set_chip(irq, &s5p_irq_vic_eint); - - for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { - irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31); - return 0; -} - -arch_initcall(s5p_init_irq_eint); diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c deleted file mode 100644 index fafdb059043a..000000000000 --- a/arch/arm/plat-samsung/s5p-irq-gpioint.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * Author: Kyungmin Park <kyungmin.park@samsung.com> - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * Author: Marek Szyprowski <m.szyprowski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/irqchip/chained_irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/slab.h> - -#include <mach/map.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> - -#define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u)) - -#define CON_OFFSET 0x700 -#define MASK_OFFSET 0x900 -#define PEND_OFFSET 0xA00 -#define REG_OFFSET(x) ((x) << 2) - -struct s5p_gpioint_bank { - struct list_head list; - int start; - int nr_groups; - int irq; - struct samsung_gpio_chip **chips; - void (*handler)(unsigned int, struct irq_desc *); -}; - -static LIST_HEAD(banks); - -static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type) -{ - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - struct irq_chip_type *ct = gc->chip_types; - unsigned int shift = (d->irq - gc->irq_base) << 2; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - type = S5P_IRQ_TYPE_EDGE_RISING; - break; - case IRQ_TYPE_EDGE_FALLING: - type = S5P_IRQ_TYPE_EDGE_FALLING; - break; - case IRQ_TYPE_EDGE_BOTH: - type = S5P_IRQ_TYPE_EDGE_BOTH; - break; - case IRQ_TYPE_LEVEL_HIGH: - type = S5P_IRQ_TYPE_LEVEL_HIGH; - break; - case IRQ_TYPE_LEVEL_LOW: - type = S5P_IRQ_TYPE_LEVEL_LOW; - break; - case IRQ_TYPE_NONE: - default: - printk(KERN_WARNING "No irq type\n"); - return -EINVAL; - } - - gc->type_cache &= ~(0x7 << shift); - gc->type_cache |= type << shift; - writel(gc->type_cache, gc->reg_base + ct->regs.type); - return 0; -} - -static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) -{ - struct s5p_gpioint_bank *bank = irq_get_handler_data(irq); - int group, pend_offset, mask_offset; - unsigned int pend, mask; - - struct irq_chip *chip = irq_get_chip(irq); - chained_irq_enter(chip, desc); - - for (group = 0; group < bank->nr_groups; group++) { - struct samsung_gpio_chip *chip = bank->chips[group]; - if (!chip) - continue; - - pend_offset = REG_OFFSET(group); - pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); - if (!pend) - continue; - - mask_offset = REG_OFFSET(group); - mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); - pend &= ~mask; - - while (pend) { - int offset = fls(pend) - 1; - int real_irq = chip->irq_base + offset; - generic_handle_irq(real_irq); - pend &= ~BIT(offset); - } - } - chained_irq_exit(chip, desc); -} - -static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip) -{ - static int used_gpioint_groups = 0; - int group = chip->group; - struct s5p_gpioint_bank *b, *bank = NULL; - struct irq_chip_generic *gc; - struct irq_chip_type *ct; - - if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) - return -ENOMEM; - - list_for_each_entry(b, &banks, list) { - if (group >= b->start && group < b->start + b->nr_groups) { - bank = b; - break; - } - } - if (!bank) - return -EINVAL; - - if (!bank->handler) { - bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) * - bank->nr_groups, GFP_KERNEL); - if (!bank->chips) - return -ENOMEM; - - irq_set_chained_handler(bank->irq, s5p_gpioint_handler); - irq_set_handler_data(bank->irq, bank); - bank->handler = s5p_gpioint_handler; - printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n", - bank->irq); - } - - /* - * chained GPIO irq has been successfully registered, allocate new gpio - * int group and assign irq nubmers - */ - chip->irq_base = S5P_GPIOINT_BASE + - used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE; - used_gpioint_groups++; - - bank->chips[group - bank->start] = chip; - - gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base, - GPIO_BASE(chip), - handle_level_irq); - if (!gc) - return -ENOMEM; - ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_mask = irq_gc_mask_set_bit; - ct->chip.irq_unmask = irq_gc_mask_clr_bit; - ct->chip.irq_set_type = s5p_gpioint_set_type, - ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start); - ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start); - ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start); - irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio), - IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); - return 0; -} - -int __init s5p_register_gpio_interrupt(int pin) -{ - struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin); - int offset, group; - int ret; - - if (!my_chip) - return -EINVAL; - - offset = pin - my_chip->chip.base; - group = my_chip->group; - - /* check if the group has been already registered */ - if (my_chip->irq_base) - goto success; - - /* register gpio group */ - ret = s5p_gpioint_add(my_chip); - if (ret == 0) { - my_chip->chip.to_irq = samsung_gpiolib_to_irq; - printk(KERN_INFO "Registered interrupt support for gpio group %d.\n", - group); - goto success; - } - return ret; -success: - my_chip->bitmap_gpio_int |= BIT(offset); - - return my_chip->irq_base + offset; -} - -int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups) -{ - struct s5p_gpioint_bank *bank; - - bank = kzalloc(sizeof(*bank), GFP_KERNEL); - if (!bank) - return -ENOMEM; - - bank->start = start; - bank->nr_groups = nr_groups; - bank->irq = chain_irq; - - list_add_tail(&bank->list, &banks); - return 0; -} diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c deleted file mode 100644 index 52b16943617e..000000000000 --- a/arch/arm/plat-samsung/s5p-irq-pm.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/plat-s3c24xx/irq-pm.c, - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> - -#include <plat/cpu.h> -#include <plat/irqs.h> -#include <plat/pm.h> -#include <mach/map.h> - -#include <mach/regs-gpio.h> -#include <mach/regs-irq.h> - -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM, - * as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ - -unsigned long s3c_irqwake_intallow = 0x00000006L; -unsigned long s3c_irqwake_eintallow = 0xffffffffL; - -int s3c_irq_wake(struct irq_data *data, unsigned int state) -{ - unsigned long irqbit; - unsigned int irq_rtc_tic, irq_rtc_alarm; - - irq_rtc_tic = IRQ_RTC_TIC; - irq_rtc_alarm = IRQ_RTC_ALARM; - - if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) { - irqbit = 1 << (data->irq + 1 - irq_rtc_alarm); - - if (!state) - s3c_irqwake_intmask |= irqbit; - else - s3c_irqwake_intmask &= ~irqbit; - } else { - return -ENOENT; - } - - return 0; -} - -static struct sleep_save eint_save[] = { - SAVE_ITEM(S5P_EINT_CON(0)), - SAVE_ITEM(S5P_EINT_CON(1)), - SAVE_ITEM(S5P_EINT_CON(2)), - SAVE_ITEM(S5P_EINT_CON(3)), - - SAVE_ITEM(S5P_EINT_FLTCON(0)), - SAVE_ITEM(S5P_EINT_FLTCON(1)), - SAVE_ITEM(S5P_EINT_FLTCON(2)), - SAVE_ITEM(S5P_EINT_FLTCON(3)), - SAVE_ITEM(S5P_EINT_FLTCON(4)), - SAVE_ITEM(S5P_EINT_FLTCON(5)), - SAVE_ITEM(S5P_EINT_FLTCON(6)), - SAVE_ITEM(S5P_EINT_FLTCON(7)), - - SAVE_ITEM(S5P_EINT_MASK(0)), - SAVE_ITEM(S5P_EINT_MASK(1)), - SAVE_ITEM(S5P_EINT_MASK(2)), - SAVE_ITEM(S5P_EINT_MASK(3)), -}; - -int s3c24xx_irq_suspend(void) -{ - s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save)); - - return 0; -} - -void s3c24xx_irq_resume(void) -{ - s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save)); -} - diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c deleted file mode 100644 index ddfaca9c79d8..000000000000 --- a/arch/arm/plat-samsung/s5p-irq.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P - Interrupt handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/irqchip/arm-vic.h> - -#include <mach/irqs.h> -#include <mach/map.h> -#include <plat/cpu.h> - -void __init s5p_init_irq(u32 *vic, u32 num_vic) -{ -#ifdef CONFIG_ARM_VIC - int irq; - - /* initialize the VICs */ - for (irq = 0; irq < num_vic; irq++) - vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0); -#endif -} diff --git a/arch/arm/plat-samsung/s5p-pm.c b/arch/arm/plat-samsung/s5p-pm.c deleted file mode 100644 index 0747468f0936..000000000000 --- a/arch/arm/plat-samsung/s5p-pm.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P Power Manager (Suspend-To-RAM) support - * - * Based on arch/arm/plat-s3c24xx/pm.c - * Copyright (c) 2004,2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/suspend.h> -#include <plat/pm.h> - -#define PFX "s5p pm: " - -/* s3c_pm_configure_extint - * - * configure all external interrupt pins -*/ - -void s3c_pm_configure_extint(void) -{ - /* nothing here yet */ -} - -void s3c_pm_restore_core(void) -{ - /* nothing here yet */ -} - -void s3c_pm_save_core(void) -{ - /* nothing here yet */ -} - diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index fce41e93b6a4..a301ca2c7d00 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -3,9 +3,6 @@ if PLAT_VERSATILE config PLAT_VERSATILE_CLOCK bool -config PLAT_VERSATILE_CLCD - bool - config PLAT_VERSATILE_SCHED_CLOCK def_bool y diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 2e0c472958ae..03c4900ac3f4 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,6 +1,5 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o -obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/clcd.c b/arch/arm/plat-versatile/clcd.c deleted file mode 100644 index 6628cc27efc5..000000000000 --- a/arch/arm/plat-versatile/clcd.c +++ /dev/null @@ -1,182 +0,0 @@ -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <plat/clcd.h> - -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, - .bpp = 16, -}; - -static struct clcd_panel xvga = { - .mode = { - .name = "XVGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15748, - .left_margin = 152, - .right_margin = 48, - .upper_margin = 23, - .lower_margin = 3, - .hsync_len = 104, - .vsync_len = 4, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, - .bpp = 16, -}; - -/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */ -static struct clcd_panel sanyo_tm38qv67a02a = { - .mode = { - .name = "Sanyo TM38QV67A02A", - .refresh = 116, - .xres = 320, - .yres = 240, - .pixclock = 100000, - .left_margin = 6, - .right_margin = 6, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 6, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .bpp = 16, -}; - -static struct clcd_panel sanyo_2_5_in = { - .mode = { - .name = "Sanyo QVGA Portrait", - .refresh = 116, - .xres = 240, - .yres = 320, - .pixclock = 100000, - .left_margin = 20, - .right_margin = 10, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .bpp = 16, -}; - -/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */ -static struct clcd_panel epson_l2f50113t00 = { - .mode = { - .name = "Epson L2F50113T00", - .refresh = 390, - .xres = 176, - .yres = 220, - .pixclock = 62500, - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 0, - .hsync_len = 3, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .caps = CLCD_CAP_5551, - .bpp = 16, -}; - -static struct clcd_panel *panels[] = { - &vga, - &xvga, - &sanyo_tm38qv67a02a, - &sanyo_2_5_in, - &epson_l2f50113t00, -}; - -struct clcd_panel *versatile_clcd_get_panel(const char *name) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(panels); i++) - if (strcmp(panels[i]->mode.name, name) == 0) - break; - - if (i < ARRAY_SIZE(panels)) - return panels[i]; - - pr_err("CLCD: couldn't get parameters for panel %s\n", name); - - return NULL; -} - -int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) -{ - dma_addr_t dma; - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); - if (!fb->fb.screen_base) { - pr_err("CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} - -int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} - -void versatile_clcd_remove_dma(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); -} diff --git a/arch/arm/plat-versatile/include/plat/clcd.h b/arch/arm/plat-versatile/include/plat/clcd.h deleted file mode 100644 index 6bb6a1d2019b..000000000000 --- a/arch/arm/plat-versatile/include/plat/clcd.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef PLAT_CLCD_H -#define PLAT_CLCD_H - -struct clcd_panel *versatile_clcd_get_panel(const char *); -int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); -int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); -void versatile_clcd_remove_dma(struct clcd_fb *); - -#endif diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index fe6ca574d093..2e78760f3495 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -34,7 +34,7 @@ ENDPROC(do_vfp) ENTRY(vfp_null_entry) dec_preempt_count_ti r10, r4 - mov pc, lr + ret lr ENDPROC(vfp_null_entry) .align 2 @@ -49,7 +49,7 @@ ENTRY(vfp_testing_entry) dec_preempt_count_ti r10, r4 ldr r0, VFP_arch_address str r0, [r0] @ set to non-zero value - mov pc, r9 @ we have handled the fault + ret r9 @ we have handled the fault ENDPROC(vfp_testing_entry) .align 2 diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index be807625ed8c..cda654cbf2c2 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -183,7 +183,7 @@ vfp_hw_state_valid: @ always subtract 4 from the following @ instruction address. dec_preempt_count_ti r10, r4 - mov pc, r9 @ we think we have handled things + ret r9 @ we think we have handled things look_for_VFP_exceptions: @@ -202,7 +202,7 @@ look_for_VFP_exceptions: DBGSTR "not VFP" dec_preempt_count_ti r10, r4 - mov pc, lr + ret lr process_exception: DBGSTR "bounce" @@ -234,7 +234,7 @@ ENTRY(vfp_save_state) VFPFMRX r12, FPINST2 @ FPINST2 if needed (and present) 1: stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 - mov pc, lr + ret lr ENDPROC(vfp_save_state) .align @@ -245,7 +245,7 @@ vfp_current_hw_state_address: #ifdef CONFIG_THUMB2_KERNEL adr \tmp, 1f add \tmp, \tmp, \base, lsl \shift - mov pc, \tmp + ret \tmp #else add pc, pc, \base, lsl \shift mov r0, r0 @@ -257,10 +257,10 @@ ENTRY(vfp_get_float) tbl_branch r0, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0 - mov pc, lr + ret lr .org 1b + 8 1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1 - mov pc, lr + ret lr .org 1b + 8 .endr ENDPROC(vfp_get_float) @@ -269,10 +269,10 @@ ENTRY(vfp_put_float) tbl_branch r1, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0 - mov pc, lr + ret lr .org 1b + 8 1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1 - mov pc, lr + ret lr .org 1b + 8 .endr ENDPROC(vfp_put_float) @@ -281,14 +281,14 @@ ENTRY(vfp_get_double) tbl_branch r0, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: fmrrd r0, r1, d\dr - mov pc, lr + ret lr .org 1b + 8 .endr #ifdef CONFIG_VFPv3 @ d16 - d31 registers .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr - mov pc, lr + ret lr .org 1b + 8 .endr #endif @@ -296,21 +296,21 @@ ENTRY(vfp_get_double) @ virtual register 16 (or 32 if VFPv3) for compare with zero mov r0, #0 mov r1, #0 - mov pc, lr + ret lr ENDPROC(vfp_get_double) ENTRY(vfp_put_double) tbl_branch r2, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: fmdrr d\dr, r0, r1 - mov pc, lr + ret lr .org 1b + 8 .endr #ifdef CONFIG_VFPv3 @ d16 - d31 registers .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr - mov pc, lr + ret lr .org 1b + 8 .endr #endif diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 1e632430570b..98544c5f86e9 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -181,8 +181,7 @@ static void xen_restart(enum reboot_mode reboot_mode, const char *cmd) struct sched_shutdown r = { .reason = SHUTDOWN_reboot }; int rc; rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); - if (rc) - BUG(); + BUG_ON(rc); } static void xen_power_off(void) @@ -190,8 +189,7 @@ static void xen_power_off(void) struct sched_shutdown r = { .reason = SHUTDOWN_poweroff }; int rc; rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); - if (rc) - BUG(); + BUG_ON(rc); } static int xen_cpu_notification(struct notifier_block *self, diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c index 859a9bb002d5..2c4041c9bac5 100644 --- a/arch/arm/xen/grant-table.c +++ b/arch/arm/xen/grant-table.c @@ -45,9 +45,12 @@ void arch_gnttab_unmap(void *shared, unsigned long nr_gframes) return; } -int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes, - unsigned long max_nr_gframes, - grant_status_t **__shared) +int arch_gnttab_init(unsigned long nr_shared) { - return -ENOSYS; + return 0; +} + +int arch_gnttab_init(unsigned long nr_shared, unsigned long nr_status) +{ + return 0; } diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 44e3a5f10c4c..f00e08075938 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -58,7 +58,7 @@ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ __HVC(XEN_IMM); \ - mov pc, lr; \ + ret lr; \ ENDPROC(HYPERVISOR_##hypercall) #define HYPERCALL0 HYPERCALL_SIMPLE @@ -74,7 +74,7 @@ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ __HVC(XEN_IMM); \ ldm sp!, {r4} \ - mov pc, lr \ + ret lr \ ENDPROC(HYPERVISOR_##hypercall) .text @@ -101,5 +101,5 @@ ENTRY(privcmd_call) ldr r4, [sp, #4] __HVC(XEN_IMM) ldm sp!, {r4} - mov pc, lr + ret lr ENDPROC(privcmd_call); |