diff options
Diffstat (limited to 'arch/arm')
77 files changed, 932 insertions, 246 deletions
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index a5983588f96b..dd53d6eb53ad 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -9,16 +9,22 @@ #include <linux/sizes.h> .macro __nop -#ifdef CONFIG_EFI_STUB - @ This is almost but not quite a NOP, since it does clobber the - @ condition flags. But it is the best we can do for EFI, since - @ PE/COFF expects the magic string "MZ" at offset 0, while the - @ ARM/Linux boot protocol expects an executable instruction - @ there. - .inst MZ_MAGIC | (0x1310 << 16) @ tstne r0, #0x4d000 -#else AR_CLASS( mov r0, r0 ) M_CLASS( nop.w ) + .endm + + .macro __initial_nops +#ifdef CONFIG_EFI_STUB + @ This is a two-instruction NOP, which happens to bear the + @ PE/COFF signature "MZ" in the first two bytes, so the kernel + @ is accepted as an EFI binary. Booting via the UEFI stub + @ will not execute those instructions, but the ARM/Linux + @ boot protocol does, so we need some NOPs here. + .inst MZ_MAGIC | (0xe225 << 16) @ eor r5, r5, 0x4d000 + eor r5, r5, 0x4d000 @ undo previous insn +#else + __nop + __nop #endif .endm diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index cbe126297f54..0a2410adc25b 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -165,7 +165,8 @@ start: * were patching the initial instructions of the kernel, i.e * had started to exploit this "patch area". */ - .rept 7 + __initial_nops + .rept 5 __nop .endr #ifndef CONFIG_THUMB2_KERNEL diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index a1fd3e63e86e..3db30ce134b9 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -160,6 +160,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ #phy-cells = <0>; @@ -167,7 +169,9 @@ }; &davinci_emac { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + status = "okay"; }; &davinci_mdio { @@ -192,6 +196,8 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; /* User DIP swithes [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { @@ -204,6 +210,8 @@ }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; @@ -222,6 +230,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; port1-mode = "ehci-phy"; }; @@ -230,8 +240,35 @@ }; &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; + + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ + OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ + OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ + OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ + OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ + OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ + OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ + OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ + OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -299,8 +336,6 @@ }; &omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>; hsusb1_pins: pinmux_hsusb1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index 8b669e2eafec..f7b680f6c48a 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -69,6 +69,8 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; s35390a: s35390a@30 { @@ -179,6 +181,13 @@ &omap3_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 669da3a33d82..5b82e58a1cf0 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -165,7 +165,7 @@ }; uart0: serial@12000 { - compatible = "marvell,armada-38x-uart"; + compatible = "marvell,armada-38x-uart", "ns16550a"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -175,7 +175,7 @@ }; uart1: serial@12100 { - compatible = "marvell,armada-38x-uart"; + compatible = "marvell,armada-38x-uart", "ns16550a"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index 996e006e06c2..f310f4d3bcc7 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -118,7 +118,7 @@ }; pinctrl_fwqspid_default: fwqspid_default { - function = "FWQSPID"; + function = "FWSPID"; groups = "FWQSPID"; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index bda22700110c..287566e09a67 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -217,6 +217,12 @@ wm8731: wm8731@1b { compatible = "wm8731"; reg = <0x1b>; + + /* PCK0 at 12MHz */ + clocks = <&pmc PMC_TYPE_SYSTEM 8>; + clock-names = "mclk"; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; + assigned-clock-rates = <12000000>; }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 43ff85d31dc1..5a1352fd90d1 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -77,7 +77,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -217,7 +217,7 @@ #dma-cells = <1>; }; - sdio: sdhci@21000 { + sdio: mmc@21000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x21000 0x100>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index beb6c502dadc..bcad098a7fcc 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -38,12 +38,26 @@ #size-cells = <0>; enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system + * /about-the-l1-memory-system?lang=en + * + * Source for d/i-cache-size + * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks + */ cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000d8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu1: cpu@1 { @@ -52,6 +66,13 @@ reg = <1>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000e0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu2: cpu@2 { @@ -60,6 +81,13 @@ reg = <2>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000e8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu3: cpu@3 { @@ -68,6 +96,27 @@ reg = <3>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000f0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; + }; + + /* Source for cache-line-size + cache-sets + * https://developer.arm.com/documentation/ddi0500 + * /e/level-2-memory-system/about-the-l2-memory-system?lang=en + * Source for cache-size + * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf + */ + l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set + cache-level = <2>; }; }; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 50c64146d492..af81f386793c 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -183,6 +183,7 @@ interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&gpio 0 0 54>; /* Defines pin muxing groups according to * BCM2835-ARM-Peripherals.pdf page 102. diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 9711170649b6..05d67f976911 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -242,6 +242,8 @@ gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; pcie0: pcie@12000 { @@ -387,7 +389,7 @@ i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d31a68672bfa..d7d756614edd 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -260,7 +260,7 @@ }; uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-4"; + samsung,pins = "gpa1-4", "gpa1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 70a2b6e2ad3f..fa5dd992e327 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -117,6 +117,9 @@ status = "okay"; ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; }; &i2c_0 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 8240e5186972..fb92d87d8ded 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -132,6 +132,9 @@ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; + vdd-supply = <&ldo6_reg>; + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; }; &hsi2c_4 { diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index e1020e07e136..60cec653ac7c 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -84,7 +84,7 @@ partitions { compatible = "redboot-fis"; /* Eraseblock at 0xfe0000 */ - fis-index-block = <0x1fc>; + fis-index-block = <0x7f>; }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 0b2701ca2921..858b8057e854 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -79,7 +79,6 @@ MX23_PAD_LCD_RESET__GPIO_1_18 MX23_PAD_PWM3__GPIO_1_29 MX23_PAD_PWM4__GPIO_1_30 - MX23_PAD_SSP1_DETECT__SSP1_DETECT >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index 03c43c1912a7..d002c8f738b5 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -53,6 +53,31 @@ }; }; + lvds-decoder { + compatible = "ti,ds90cf364a", "lvds-decoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_decoder_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + + lvds_decoder_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + panel { compatible = "edt,etm0700g0dh6"; pinctrl-0 = <&pinctrl_display_gpio>; @@ -61,7 +86,7 @@ port { panel_in: endpoint { - remote-endpoint = <&lvds0_out>; + remote-endpoint = <&lvds_decoder_out>; }; }; }; @@ -450,7 +475,7 @@ reg = <2>; lvds0_out: endpoint { - remote-endpoint = <&panel_in>; + remote-endpoint = <&lvds_decoder_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 7c4ad541c3f5..b165bd6ea53b 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -314,6 +314,8 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -543,8 +545,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -810,6 +810,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 16672cbada28..6c8da3f03733 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -5,6 +5,8 @@ * Author: Fabio Estevam <fabio.estevam@freescale.com> */ +#include <dt-bindings/gpio/gpio.h> + / { aliases { backlight = &backlight; @@ -218,6 +220,7 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 >; }; @@ -290,7 +293,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - non-removable; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index d56728f03c35..c83323b9ea53 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -37,7 +37,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-gpio"; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_reg_sd>; regulator-always-on; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h index eb025a9d4759..7328d4ef8559 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h @@ -82,6 +82,6 @@ #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 -#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0 0x0200 0x048C 0x0000 0x9 0x0 #endif /* __DTS_IMX6ULL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index f7a841a28865..270e4986b6e6 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index a604d92221a4..c757f0d7781c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index b56524cc7fe2..55b619c99e24 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -265,21 +265,6 @@ }; }; -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; - &uart2 { interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index 5b7689094b70..7235ce2a3293 100644 --- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -247,7 +247,7 @@ flash@0 { /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ - compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 8a9f132a32c1..e6ece0486b16 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -313,39 +313,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - dspi0: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -1016,4 +983,37 @@ big-endian; }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index c4447f6c8b2c..e141ce748484 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -49,14 +49,14 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84c0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@84dc { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84dc 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -94,7 +94,7 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x8700 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -196,7 +196,7 @@ }; uart_AO: serial@4c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart"; reg = <0x4c0 0x18>; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; status = "disabled"; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi index 7f6aefd13451..e7534fe9c53c 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi @@ -29,7 +29,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 186b2af7743e..089e9f1f442b 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -31,6 +31,8 @@ aliases { display0 = &lcd; display1 = &tv0; + /delete-property/ mmc2; + /delete-property/ mmc3; }; ldo_3v3: fixedregulator { diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index e5da3bc6f105..218a10c0d815 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -22,7 +22,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 56f51599852d..338256c59ca5 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -141,7 +141,8 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32768>; + clock-frequency = <32000>; + clock-output-names = "gcc_sleep_clk_src"; #clock-cells = <0>; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index f2aeaccdc1ad..15ff0e8fd0d3 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -145,7 +145,9 @@ reg = <0x108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>; - interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; regulators { @@ -191,7 +193,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; - interrupts = <0 154 0x0>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -317,7 +319,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x16080000 0x1000>; - interrupts = <0 147 0>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <24000000>; cs-gpios = <&msmgpio 8 0>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 140e22d74dcf..d393bb481e74 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -635,8 +635,8 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; assigned-clocks = <&cru SCLK_HDMI_PHY>; assigned-clock-parents = <&hdmi_phy>; - clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>; - clock-names = "isfr", "iahb", "cec"; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "cec"; pinctrl-names = "default"; pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; resets = <&cru SRST_HDMI_P>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 658ceb96d8bd..7dcafd0833ba 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -975,7 +975,7 @@ status = "disabled"; }; - crypto: cypto-controller@ff8a0000 { + crypto: crypto@ff8a0000 { compatible = "rockchip,rk3288-crypto"; reg = <0x0 0xff8a0000 0x0 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index b05bab57f90a..09816a2ee367 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -526,7 +526,7 @@ pmecc: ecc-engine@f8014070 { compatible = "atmel,sama5d2-pmecc"; reg = <0xf8014070 0x490>, - <0xf8014500 0x100>; + <0xf8014500 0x200>; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index b4c0a76a4d1a..4c2fcfcc7bae 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -12,7 +12,7 @@ flash0: n25q00@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00aa"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 90e676e7019f..1b02d46496a8 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -119,7 +119,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 6f138b2b2616..51bb436784e2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -124,7 +124,7 @@ flash0: n25q00@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; /* chip select */ spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index c155ff02eb6e..cae9ddd5ed38 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -169,7 +169,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index 8d5d3996f6f2..ca18b959e655 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -80,7 +80,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts index 99a71757cdf4..3f7aa7bf0863 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -116,7 +116,7 @@ flash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q512a"; + compatible = "micron,n25q512a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index a060718758b6..25874e1b9c82 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -224,7 +224,7 @@ n25q128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128"; + compatible = "micron,n25q128", "jedec,spi-nor"; reg = <0>; /* chip select */ spi-max-frequency = <100000000>; m25p,fast-read; @@ -241,7 +241,7 @@ n25q00@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <1>; /* chip select */ spi-max-frequency = <100000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 1a8f5e8b10e3..66cd473ecb61 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -136,9 +136,9 @@ reg = <0xb4100000 0x1000>; interrupts = <0 105 0x4>; status = "disabled"; - dmas = <&dwdma0 12 0 1>, - <&dwdma0 13 1 0>; - dma-names = "tx", "rx"; + dmas = <&dwdma0 13 0 1>, + <&dwdma0 12 1 0>; + dma-names = "rx", "tx"; }; thermal@e07008c4 { diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index f187da4485f4..78672db9068b 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -284,9 +284,9 @@ #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; - dmas = <&dwdma0 4 0 0>, - <&dwdma0 5 0 0>; - dma-names = "tx", "rx"; + dmas = <&dwdma0 5 0 0>, + <&dwdma0 4 0 0>; + dma-names = "rx", "tx"; }; rtc@e0580000 { diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 394a6b4dc69d..69cb65d86c46 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -183,8 +183,8 @@ }; conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "cdev2", "dap1", "dtb", "gma", - "gmb", "gmc", "gmd", "gme", "gpu7", + "cdev1", "cdev2", "dap1", "dtb", "dtf", + "gma", "gmb", "gmc", "gmd", "gme", "gpu7", "gpv", "i2cp", "irrx", "irtx", "pta", "rm", "slxa", "slxk", "spia", "spib", "uac"; @@ -203,7 +203,7 @@ }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", - "dtc", "dte", "dtf", "gpu", "sdio1", + "dtc", "dte", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", "uda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 3546d294d55f..6b3e64e19fb6 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -107,6 +107,16 @@ .endm #endif +#if __LINUX_ARM_ARCH__ < 7 + .macro dsb, args + mcr p15, 0, r0, c7, c10, 4 + .endm + + .macro isb, args + mcr p15, 0, r0, c7, c5, 4 + .endm +#endif + .macro asm_trace_hardirqs_off, save=1 #if defined(CONFIG_TRACE_IRQFLAGS) .if \save diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 32564b017ba0..d8ac89879327 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -15,6 +15,7 @@ #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> #include <asm/fpstate.h> +#include <asm/spectre.h> #include <kvm/arm_arch_timer.h> #define __KVM_HAVE_ARCH_INTC_INITIALIZED @@ -424,4 +425,10 @@ static inline bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu) #define kvm_arm_vcpu_loaded(vcpu) (false) +static inline int kvm_arm_get_spectre_bhb_state(void) +{ + /* 32bit guests don't need firmware for this */ + return SPECTRE_VULNERABLE; /* aka SMCCC_RET_NOT_SUPPORTED */ +} + #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/spectre.h b/arch/arm/include/asm/spectre.h new file mode 100644 index 000000000000..85f9e538fb32 --- /dev/null +++ b/arch/arm/include/asm/spectre.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __ASM_SPECTRE_H +#define __ASM_SPECTRE_H + +enum { + SPECTRE_UNAFFECTED, + SPECTRE_MITIGATED, + SPECTRE_VULNERABLE, +}; + +enum { + __SPECTRE_V2_METHOD_BPIALL, + __SPECTRE_V2_METHOD_ICIALLU, + __SPECTRE_V2_METHOD_SMC, + __SPECTRE_V2_METHOD_HVC, + __SPECTRE_V2_METHOD_LOOP8, +}; + +enum { + SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL), + SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU), + SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC), + SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC), + SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8), +}; + +#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES +void spectre_v2_update_state(unsigned int state, unsigned int methods); +#else +static inline void spectre_v2_update_state(unsigned int state, + unsigned int methods) +{} +#endif + +int spectre_bhb_update_vectors(unsigned int method); + +#endif diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 2769360f195c..89b8e70068a1 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -227,6 +227,12 @@ struct kvm_vcpu_events { #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3 KVM_REG_ARM_FW_REG(3) + /* Higher values mean better protection. */ +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED 2 + /* Device Control API: ARM VGIC */ #define KVM_DEV_ARM_VGIC_GRP_ADDR 0 #define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1 diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8b679e2ca3c3..dc31426cae6d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -106,4 +106,6 @@ endif obj-$(CONFIG_HAVE_ARM_SMCCC) += smccc-call.o +obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o + extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index b62d74a2c73a..3d65fa56a0e5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -596,11 +596,9 @@ call_fpe: tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 reteq lr and r8, r0, #0x00000f00 @ mask out CP number - THUMB( lsr r8, r8, #8 ) mov r7, #1 - add r6, r10, #TI_USED_CP - ARM( strb r7, [r6, r8, lsr #8] ) @ set appropriate used_cp[] - THUMB( strb r7, [r6, r8] ) @ set appropriate used_cp[] + add r6, r10, r8, lsr #8 @ add used_cp[] array offset first + strb r7, [r6, #TI_USED_CP] @ set appropriate used_cp[] #ifdef CONFIG_IWMMXT @ Test if we need to give access to iWMMXt coprocessors ldr r5, [r10, #TI_FLAGS] @@ -609,7 +607,7 @@ call_fpe: bcs iwmmxt_task_enable #endif ARM( add pc, pc, r8, lsr #6 ) - THUMB( lsl r8, r8, #2 ) + THUMB( lsr r8, r8, #6 ) THUMB( add pc, r8 ) nop @@ -1007,12 +1005,11 @@ vector_\name: sub lr, lr, #\correction .endif - @ - @ Save r0, lr_<exception> (parent PC) and spsr_<exception> - @ (parent CPSR) - @ + @ Save r0, lr_<exception> (parent PC) stmia sp, {r0, lr} @ save r0, lr - mrs lr, spsr + + @ Save spsr_<exception> (parent CPSR) +2: mrs lr, spsr str lr, [sp, #8] @ save spsr @ @@ -1033,6 +1030,44 @@ vector_\name: movs pc, lr @ branch to handler in SVC mode ENDPROC(vector_\name) +#ifdef CONFIG_HARDEN_BRANCH_HISTORY + .subsection 1 + .align 5 +vector_bhb_loop8_\name: + .if \correction + sub lr, lr, #\correction + .endif + + @ Save r0, lr_<exception> (parent PC) + stmia sp, {r0, lr} + + @ bhb workaround + mov r0, #8 +3: b . + 4 + subs r0, r0, #1 + bne 3b + dsb + isb + b 2b +ENDPROC(vector_bhb_loop8_\name) + +vector_bhb_bpiall_\name: + .if \correction + sub lr, lr, #\correction + .endif + + @ Save r0, lr_<exception> (parent PC) + stmia sp, {r0, lr} + + @ bhb workaround + mcr p15, 0, r0, c7, c5, 6 @ BPIALL + @ isb not needed due to "movs pc, lr" in the vector stub + @ which gives a "context synchronisation". + b 2b +ENDPROC(vector_bhb_bpiall_\name) + .previous +#endif + .align 2 @ handler addresses follow this label 1: @@ -1041,6 +1076,10 @@ ENDPROC(vector_\name) .section .stubs, "ax", %progbits @ This must be the first word .word vector_swi +#ifdef CONFIG_HARDEN_BRANCH_HISTORY + .word vector_bhb_loop8_swi + .word vector_bhb_bpiall_swi +#endif vector_rst: ARM( swi SYS_ERROR0 ) @@ -1155,8 +1194,10 @@ vector_addrexcptn: * FIQ "NMI" handler *----------------------------------------------------------------------------- * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86 - * systems. + * systems. This must be the last vector stub, so lets place it in its own + * subsection. */ + .subsection 2 vector_stub fiq, FIQ_MODE, 4 .long __fiq_usr @ 0 (USR_26 / USR_32) @@ -1189,6 +1230,30 @@ vector_addrexcptn: W(b) vector_irq W(b) vector_fiq +#ifdef CONFIG_HARDEN_BRANCH_HISTORY + .section .vectors.bhb.loop8, "ax", %progbits +.L__vectors_bhb_loop8_start: + W(b) vector_rst + W(b) vector_bhb_loop8_und + W(ldr) pc, .L__vectors_bhb_loop8_start + 0x1004 + W(b) vector_bhb_loop8_pabt + W(b) vector_bhb_loop8_dabt + W(b) vector_addrexcptn + W(b) vector_bhb_loop8_irq + W(b) vector_bhb_loop8_fiq + + .section .vectors.bhb.bpiall, "ax", %progbits +.L__vectors_bhb_bpiall_start: + W(b) vector_rst + W(b) vector_bhb_bpiall_und + W(ldr) pc, .L__vectors_bhb_bpiall_start + 0x1008 + W(b) vector_bhb_bpiall_pabt + W(b) vector_bhb_bpiall_dabt + W(b) vector_addrexcptn + W(b) vector_bhb_bpiall_irq + W(b) vector_bhb_bpiall_fiq +#endif + .data .align 2 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 271cb8a1eba1..bd619da73c84 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -163,12 +163,36 @@ ENDPROC(ret_from_fork) */ .align 5 +#ifdef CONFIG_HARDEN_BRANCH_HISTORY +ENTRY(vector_bhb_loop8_swi) + sub sp, sp, #PT_REGS_SIZE + stmia sp, {r0 - r12} + mov r8, #8 +1: b 2f +2: subs r8, r8, #1 + bne 1b + dsb + isb + b 3f +ENDPROC(vector_bhb_loop8_swi) + + .align 5 +ENTRY(vector_bhb_bpiall_swi) + sub sp, sp, #PT_REGS_SIZE + stmia sp, {r0 - r12} + mcr p15, 0, r8, c7, c5, 6 @ BPIALL + isb + b 3f +ENDPROC(vector_bhb_bpiall_swi) +#endif + .align 5 ENTRY(vector_swi) #ifdef CONFIG_CPU_V7M v7m_exception_entry #else sub sp, sp, #PT_REGS_SIZE stmia sp, {r0 - r12} @ Calling r0 - r12 +3: ARM( add r8, sp, #S_PC ) ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr THUMB( mov r8, sp ) diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index 6a95b9296640..183a6f2f165a 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr) return 0; } -static struct undef_hook kgdb_brkpt_hook = { +static struct undef_hook kgdb_brkpt_arm_hook = { .instr_mask = 0xffffffff, .instr_val = KGDB_BREAKINST, - .cpsr_mask = MODE_MASK, + .cpsr_mask = PSR_T_BIT | MODE_MASK, .cpsr_val = SVC_MODE, .fn = kgdb_brk_fn }; -static struct undef_hook kgdb_compiled_brkpt_hook = { +static struct undef_hook kgdb_brkpt_thumb_hook = { + .instr_mask = 0xffff, + .instr_val = KGDB_BREAKINST & 0xffff, + .cpsr_mask = PSR_T_BIT | MODE_MASK, + .cpsr_val = PSR_T_BIT | SVC_MODE, + .fn = kgdb_brk_fn +}; + +static struct undef_hook kgdb_compiled_brkpt_arm_hook = { .instr_mask = 0xffffffff, .instr_val = KGDB_COMPILED_BREAK, - .cpsr_mask = MODE_MASK, + .cpsr_mask = PSR_T_BIT | MODE_MASK, .cpsr_val = SVC_MODE, .fn = kgdb_compiled_brk_fn }; +static struct undef_hook kgdb_compiled_brkpt_thumb_hook = { + .instr_mask = 0xffff, + .instr_val = KGDB_COMPILED_BREAK & 0xffff, + .cpsr_mask = PSR_T_BIT | MODE_MASK, + .cpsr_val = PSR_T_BIT | SVC_MODE, + .fn = kgdb_compiled_brk_fn +}; + static int __kgdb_notify(struct die_args *args, unsigned long cmd) { struct pt_regs *regs = args->regs; @@ -210,8 +226,10 @@ int kgdb_arch_init(void) if (ret != 0) return ret; - register_undef_hook(&kgdb_brkpt_hook); - register_undef_hook(&kgdb_compiled_brkpt_hook); + register_undef_hook(&kgdb_brkpt_arm_hook); + register_undef_hook(&kgdb_brkpt_thumb_hook); + register_undef_hook(&kgdb_compiled_brkpt_arm_hook); + register_undef_hook(&kgdb_compiled_brkpt_thumb_hook); return 0; } @@ -224,8 +242,10 @@ int kgdb_arch_init(void) */ void kgdb_arch_exit(void) { - unregister_undef_hook(&kgdb_brkpt_hook); - unregister_undef_hook(&kgdb_compiled_brkpt_hook); + unregister_undef_hook(&kgdb_brkpt_arm_hook); + unregister_undef_hook(&kgdb_brkpt_thumb_hook); + unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook); + unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook); unregister_die_notifier(&kgdb_notifier); } diff --git a/arch/arm/kernel/perf_callchain.c b/arch/arm/kernel/perf_callchain.c index 3b69a76d341e..1626dfc6f6ce 100644 --- a/arch/arm/kernel/perf_callchain.c +++ b/arch/arm/kernel/perf_callchain.c @@ -62,9 +62,10 @@ user_backtrace(struct frame_tail __user *tail, void perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs) { + struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs(); struct frame_tail __user *tail; - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + if (guest_cbs && guest_cbs->is_in_guest()) { /* We don't support guest os callchain now */ return; } @@ -98,9 +99,10 @@ callchain_trace(struct stackframe *fr, void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs) { + struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs(); struct stackframe fr; - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + if (guest_cbs && guest_cbs->is_in_guest()) { /* We don't support guest os callchain now */ return; } @@ -111,18 +113,21 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re unsigned long perf_instruction_pointer(struct pt_regs *regs) { - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) - return perf_guest_cbs->get_guest_ip(); + struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs(); + + if (guest_cbs && guest_cbs->is_in_guest()) + return guest_cbs->get_guest_ip(); return instruction_pointer(regs); } unsigned long perf_misc_flags(struct pt_regs *regs) { + struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs(); int misc = 0; - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { - if (perf_guest_cbs->is_user_mode()) + if (guest_cbs && guest_cbs->is_in_guest()) { + if (guest_cbs->is_user_mode()) misc |= PERF_RECORD_MISC_GUEST_USER; else misc |= PERF_RECORD_MISC_GUEST_KERNEL; diff --git a/arch/arm/kernel/spectre.c b/arch/arm/kernel/spectre.c new file mode 100644 index 000000000000..0dcefc36fb7a --- /dev/null +++ b/arch/arm/kernel/spectre.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <linux/bpf.h> +#include <linux/cpu.h> +#include <linux/device.h> + +#include <asm/spectre.h> + +static bool _unprivileged_ebpf_enabled(void) +{ +#ifdef CONFIG_BPF_SYSCALL + return !sysctl_unprivileged_bpf_disabled; +#else + return false; +#endif +} + +ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "Mitigation: __user pointer sanitization\n"); +} + +static unsigned int spectre_v2_state; +static unsigned int spectre_v2_methods; + +void spectre_v2_update_state(unsigned int state, unsigned int method) +{ + if (state > spectre_v2_state) + spectre_v2_state = state; + spectre_v2_methods |= method; +} + +ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, + char *buf) +{ + const char *method; + + if (spectre_v2_state == SPECTRE_UNAFFECTED) + return sprintf(buf, "%s\n", "Not affected"); + + if (spectre_v2_state != SPECTRE_MITIGATED) + return sprintf(buf, "%s\n", "Vulnerable"); + + if (_unprivileged_ebpf_enabled()) + return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n"); + + switch (spectre_v2_methods) { + case SPECTRE_V2_METHOD_BPIALL: + method = "Branch predictor hardening"; + break; + + case SPECTRE_V2_METHOD_ICIALLU: + method = "I-cache invalidation"; + break; + + case SPECTRE_V2_METHOD_SMC: + case SPECTRE_V2_METHOD_HVC: + method = "Firmware call"; + break; + + case SPECTRE_V2_METHOD_LOOP8: + method = "History overwrite"; + break; + + default: + method = "Multiple mitigations"; + break; + } + + return sprintf(buf, "Mitigation: %s\n", method); +} diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 97a512551b21..207ef9a797bd 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -30,6 +30,7 @@ #include <linux/atomic.h> #include <asm/cacheflush.h> #include <asm/exception.h> +#include <asm/spectre.h> #include <asm/unistd.h> #include <asm/traps.h> #include <asm/ptrace.h> @@ -799,10 +800,59 @@ static inline void __init kuser_init(void *vectors) } #endif +#ifndef CONFIG_CPU_V7M +static void copy_from_lma(void *vma, void *lma_start, void *lma_end) +{ + memcpy(vma, lma_start, lma_end - lma_start); +} + +static void flush_vectors(void *vma, size_t offset, size_t size) +{ + unsigned long start = (unsigned long)vma + offset; + unsigned long end = start + size; + + flush_icache_range(start, end); +} + +#ifdef CONFIG_HARDEN_BRANCH_HISTORY +int spectre_bhb_update_vectors(unsigned int method) +{ + extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[]; + extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[]; + void *vec_start, *vec_end; + + if (system_state > SYSTEM_SCHEDULING) { + pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n", + smp_processor_id()); + return SPECTRE_VULNERABLE; + } + + switch (method) { + case SPECTRE_V2_METHOD_LOOP8: + vec_start = __vectors_bhb_loop8_start; + vec_end = __vectors_bhb_loop8_end; + break; + + case SPECTRE_V2_METHOD_BPIALL: + vec_start = __vectors_bhb_bpiall_start; + vec_end = __vectors_bhb_bpiall_end; + break; + + default: + pr_err("CPU%u: unknown Spectre BHB state %d\n", + smp_processor_id(), method); + return SPECTRE_VULNERABLE; + } + + copy_from_lma(vectors_page, vec_start, vec_end); + flush_vectors(vectors_page, 0, vec_end - vec_start); + + return SPECTRE_MITIGATED; +} +#endif + void __init early_trap_init(void *vectors_base) { -#ifndef CONFIG_CPU_V7M - unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; unsigned i; @@ -823,17 +873,20 @@ void __init early_trap_init(void *vectors_base) * into the vector page, mapped at 0xffff0000, and ensure these * are visible to the instruction stream. */ - memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start); - memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start); + copy_from_lma(vectors_base, __vectors_start, __vectors_end); + copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end); kuser_init(vectors_base); - flush_icache_range(vectors, vectors + PAGE_SIZE * 2); + flush_vectors(vectors_base, 0, PAGE_SIZE * 2); +} #else /* ifndef CONFIG_CPU_V7M */ +void __init early_trap_init(void *vectors_base) +{ /* * on V7-M there is no need to copy the vector table to a dedicated * memory area. The address is configurable and so a table in the kernel * image can be used. */ -#endif } +#endif diff --git a/arch/arm/kernel/vmlinux.lds.h b/arch/arm/kernel/vmlinux.lds.h index 8247bc15addc..78d156e4f008 100644 --- a/arch/arm/kernel/vmlinux.lds.h +++ b/arch/arm/kernel/vmlinux.lds.h @@ -25,6 +25,19 @@ #define ARM_MMU_DISCARD(x) x #endif +/* + * ld.lld does not support NOCROSSREFS: + * https://github.com/ClangBuiltLinux/linux/issues/1609 + */ +#ifdef CONFIG_LD_IS_LLD +#define NOCROSSREFS +#endif + +/* Set start/end symbol names to the LMA for the section */ +#define ARM_LMA(sym, section) \ + sym##_start = LOADADDR(section); \ + sym##_end = LOADADDR(section) + SIZEOF(section) + #define PROC_INFO \ . = ALIGN(4); \ __proc_info_begin = .; \ @@ -100,19 +113,31 @@ * only thing that matters is their relative offsets */ #define ARM_VECTORS \ - __vectors_start = .; \ - .vectors 0xffff0000 : AT(__vectors_start) { \ - *(.vectors) \ + __vectors_lma = .; \ + OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) { \ + .vectors { \ + *(.vectors) \ + } \ + .vectors.bhb.loop8 { \ + *(.vectors.bhb.loop8) \ + } \ + .vectors.bhb.bpiall { \ + *(.vectors.bhb.bpiall) \ + } \ } \ - . = __vectors_start + SIZEOF(.vectors); \ - __vectors_end = .; \ + ARM_LMA(__vectors, .vectors); \ + ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8); \ + ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall); \ + . = __vectors_lma + SIZEOF(.vectors) + \ + SIZEOF(.vectors.bhb.loop8) + \ + SIZEOF(.vectors.bhb.bpiall); \ \ - __stubs_start = .; \ - .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { \ + __stubs_lma = .; \ + .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) { \ *(.stubs) \ } \ - . = __stubs_start + SIZEOF(.stubs); \ - __stubs_end = .; \ + ARM_LMA(__stubs, .stubs); \ + . = __stubs_lma + SIZEOF(.stubs); \ \ PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors)); diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 5b3549f1236c..b2ede9bf82df 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -1101,11 +1101,13 @@ static int __init da850_evm_config_emac(void) int ret; u32 val; struct davinci_soc_info *soc_info = &davinci_soc_info; - u8 rmii_en = soc_info->emac_pdata->rmii_en; + u8 rmii_en; if (!machine_is_davinci_da850_evm()) return 0; + rmii_en = soc_info->emac_pdata->rmii_en; + cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); val = __raw_readl(cfg_chip3_base); diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S index 8e6766d4621e..341e5d9a6616 100644 --- a/arch/arm/mach-iop32x/include/mach/entry-macro.S +++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S @@ -20,7 +20,7 @@ mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC cmp \irqstat, #0 clzne \irqnr, \irqstat - rsbne \irqnr, \irqnr, #31 + rsbne \irqnr, \irqnr, #32 .endm .macro arch_ret_to_user, tmp1, tmp2 diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h index c4e78df428e8..e09ae5f48aec 100644 --- a/arch/arm/mach-iop32x/include/mach/irqs.h +++ b/arch/arm/mach-iop32x/include/mach/irqs.h @@ -9,6 +9,6 @@ #ifndef __IRQS_H #define __IRQS_H -#define NR_IRQS 32 +#define NR_IRQS 33 #endif diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index 2d48bf1398c1..d1e8824cbd82 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -32,14 +32,14 @@ static void intstr_write(u32 val) static void iop32x_irq_mask(struct irq_data *d) { - iop32x_mask &= ~(1 << d->irq); + iop32x_mask &= ~(1 << (d->irq - 1)); intctl_write(iop32x_mask); } static void iop32x_irq_unmask(struct irq_data *d) { - iop32x_mask |= 1 << d->irq; + iop32x_mask |= 1 << (d->irq - 1); intctl_write(iop32x_mask); } @@ -65,7 +65,7 @@ void __init iop32x_init_irq(void) machine_is_em7210()) *IOP3XX_PCIIRSR = 0x0f; - for (i = 0; i < NR_IRQS; i++) { + for (i = 1; i < NR_IRQS; i++) { irq_set_chip_and_handler(i, &ext_chip, handle_level_irq); irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE); } diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h index 69858e4e905d..e1dfc8b4e7d7 100644 --- a/arch/arm/mach-iop32x/irqs.h +++ b/arch/arm/mach-iop32x/irqs.h @@ -7,36 +7,40 @@ #ifndef __IOP32X_IRQS_H #define __IOP32X_IRQS_H +/* Interrupts in Linux start at 1, hardware starts at 0 */ + +#define IOP_IRQ(x) ((x) + 1) + /* * IOP80321 chipset interrupts */ -#define IRQ_IOP32X_DMA0_EOT 0 -#define IRQ_IOP32X_DMA0_EOC 1 -#define IRQ_IOP32X_DMA1_EOT 2 -#define IRQ_IOP32X_DMA1_EOC 3 -#define IRQ_IOP32X_AA_EOT 6 -#define IRQ_IOP32X_AA_EOC 7 -#define IRQ_IOP32X_CORE_PMON 8 -#define IRQ_IOP32X_TIMER0 9 -#define IRQ_IOP32X_TIMER1 10 -#define IRQ_IOP32X_I2C_0 11 -#define IRQ_IOP32X_I2C_1 12 -#define IRQ_IOP32X_MESSAGING 13 -#define IRQ_IOP32X_ATU_BIST 14 -#define IRQ_IOP32X_PERFMON 15 -#define IRQ_IOP32X_CORE_PMU 16 -#define IRQ_IOP32X_BIU_ERR 17 -#define IRQ_IOP32X_ATU_ERR 18 -#define IRQ_IOP32X_MCU_ERR 19 -#define IRQ_IOP32X_DMA0_ERR 20 -#define IRQ_IOP32X_DMA1_ERR 21 -#define IRQ_IOP32X_AA_ERR 23 -#define IRQ_IOP32X_MSG_ERR 24 -#define IRQ_IOP32X_SSP 25 -#define IRQ_IOP32X_XINT0 27 -#define IRQ_IOP32X_XINT1 28 -#define IRQ_IOP32X_XINT2 29 -#define IRQ_IOP32X_XINT3 30 -#define IRQ_IOP32X_HPI 31 +#define IRQ_IOP32X_DMA0_EOT IOP_IRQ(0) +#define IRQ_IOP32X_DMA0_EOC IOP_IRQ(1) +#define IRQ_IOP32X_DMA1_EOT IOP_IRQ(2) +#define IRQ_IOP32X_DMA1_EOC IOP_IRQ(3) +#define IRQ_IOP32X_AA_EOT IOP_IRQ(6) +#define IRQ_IOP32X_AA_EOC IOP_IRQ(7) +#define IRQ_IOP32X_CORE_PMON IOP_IRQ(8) +#define IRQ_IOP32X_TIMER0 IOP_IRQ(9) +#define IRQ_IOP32X_TIMER1 IOP_IRQ(10) +#define IRQ_IOP32X_I2C_0 IOP_IRQ(11) +#define IRQ_IOP32X_I2C_1 IOP_IRQ(12) +#define IRQ_IOP32X_MESSAGING IOP_IRQ(13) +#define IRQ_IOP32X_ATU_BIST IOP_IRQ(14) +#define IRQ_IOP32X_PERFMON IOP_IRQ(15) +#define IRQ_IOP32X_CORE_PMU IOP_IRQ(16) +#define IRQ_IOP32X_BIU_ERR IOP_IRQ(17) +#define IRQ_IOP32X_ATU_ERR IOP_IRQ(18) +#define IRQ_IOP32X_MCU_ERR IOP_IRQ(19) +#define IRQ_IOP32X_DMA0_ERR IOP_IRQ(20) +#define IRQ_IOP32X_DMA1_ERR IOP_IRQ(21) +#define IRQ_IOP32X_AA_ERR IOP_IRQ(23) +#define IRQ_IOP32X_MSG_ERR IOP_IRQ(24) +#define IRQ_IOP32X_SSP IOP_IRQ(25) +#define IRQ_IOP32X_XINT0 IOP_IRQ(27) +#define IRQ_IOP32X_XINT1 IOP_IRQ(28) +#define IRQ_IOP32X_XINT2 IOP_IRQ(29) +#define IRQ_IOP32X_XINT3 IOP_IRQ(30) +#define IRQ_IOP32X_HPI IOP_IRQ(31) #endif diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 6794e2db1ad5..ecc46c31004f 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev) if (!info) return -ENOMEM; + platform_set_drvdata(pdev, info); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "no memory resource defined\n"); @@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev) list_add(&info->node, &sram_bank_list); mutex_unlock(&sram_lock); - platform_set_drvdata(pdev, info); - dev_info(&pdev->dev, "initialized\n"); return 0; @@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev) struct sram_bank_info *info; info = platform_get_drvdata(pdev); - if (info == NULL) - return -ENODEV; - mutex_lock(&sram_lock); - list_del(&info->node); - mutex_unlock(&sram_lock); + if (info->sram_size) { + mutex_lock(&sram_lock); + list_del(&info->node); + mutex_unlock(&sram_lock); + + gen_pool_destroy(info->gpool); + iounmap(info->sram_virt); + kfree(info->pool_name); + } - gen_pool_destroy(info->gpool); - iounmap(info->sram_virt); - kfree(info->pool_name); kfree(info); + return 0; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 46012ca812f4..1bd64f6ba8cf 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -263,9 +263,9 @@ static int __init omapdss_init_of(void) } r = of_platform_populate(node, NULL, NULL, &pdev->dev); + put_device(&pdev->dev); if (r) { pr_err("Unable to populate DSS submodule devices\n"); - put_device(&pdev->dev); return r; } diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 5c3845730dbf..0b80f8bcd304 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -314,10 +314,12 @@ void __init omap_gic_of_init(void) np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); gic_dist_base_addr = of_iomap(np, 0); + of_node_put(np); WARN_ON(!gic_dist_base_addr); np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer"); twd_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!twd_base); skip_errata_init: diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6289b288d60a..202b740adee0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -782,8 +782,10 @@ static int __init _init_clkctrl_providers(void) for_each_matching_node(np, ti_clkctrl_match_table) { ret = _setup_clkctrl_provider(np); - if (ret) + if (ret) { + of_node_put(np); break; + } } return ret; diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 885e8f12e4b9..eedc9f8ed210 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -237,11 +237,11 @@ static int __init jive_mtdset(char *options) unsigned long set; if (options == NULL || options[0] == '\0') - return 0; + return 1; if (kstrtoul(options, 10, &set)) { printk(KERN_ERR "failed to parse mtdset=%s\n", options); - return 0; + return 1; } switch (set) { @@ -256,7 +256,7 @@ static int __init jive_mtdset(char *options) "using default.", set); } - return 0; + return 1; } /* parse the mtdset= option given to the kernel command line */ diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index ee949255ced3..09ef73b99dd8 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void) return -ENODEV; for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) { - if (!of_device_is_available(np)) + if (!of_device_is_available(np)) { + of_node_put(np); break; + } ret = of_property_read_u32(np, "reg", &addr); if (ret) /* Skip invalid entry and continue */ @@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void) quirk = kzalloc(sizeof(*quirk), GFP_KERNEL); if (!quirk) { ret = -ENOMEM; + of_node_put(np); goto err_mem; } diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 22af5e308db6..61b872792c4c 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_SOCFPGA bool "Altera SOCFPGA family" depends on ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC @@ -19,6 +20,7 @@ menuconfig ARCH_SOCFPGA select PL310_ERRATA_727915 select PL310_ERRATA_753970 if PL310 select PL310_ERRATA_769419 + select RESET_CONTROLLER if ARCH_SOCFPGA config SOCFPGA_SUSPEND diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index fc2608b18a0d..18f01190dcfd 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -33,7 +33,7 @@ extern void __iomem *sdr_ctl_base_addr; u32 socfpga_sdram_self_refresh(u32 sdr_base); extern unsigned int socfpga_sdram_self_refresh_sz; -extern char secondary_trampoline, secondary_trampoline_end; +extern char secondary_trampoline[], secondary_trampoline_end[]; extern unsigned long socfpga_cpu1start_addr; diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index fbb80b883e5d..201191cf68f3 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -20,14 +20,14 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; + int trampoline_size = secondary_trampoline_end - secondary_trampoline; if (socfpga_cpu1start_addr) { /* This will put CPU #1 into reset. */ writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); - memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); + memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size); writel(__pa_symbol(secondary_startup), sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff)); @@ -45,12 +45,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; + int trampoline_size = secondary_trampoline_end - secondary_trampoline; if (socfpga_cpu1start_addr) { writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_MODMPURST); - memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); + memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size); writel(__pa_symbol(secondary_startup), sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff)); diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 1da11bdb1dfb..1c6500c4e6a1 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void) } cluster = topology_physical_package_id(cpu_dev->id); - if (init_opp_table[cluster]) + if (cluster < 0 || init_opp_table[cluster]) continue; if (ve_init_opp_table(cpu_dev)) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index fc388eb60e0b..00ffee644372 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -743,6 +743,7 @@ config SWP_EMULATE config CPU_BIG_ENDIAN bool "Build big-endian kernel" depends on ARCH_SUPPORTS_BIG_ENDIAN + depends on !LD_IS_LLD help Say Y if you plan on running a kernel in big-endian mode. Note that your board must be properly built and your board @@ -832,6 +833,7 @@ config CPU_BPREDICT_DISABLE config CPU_SPECTRE bool + select GENERIC_CPU_VULNERABILITIES config HARDEN_BRANCH_PREDICTOR bool "Harden the branch predictor against aliasing attacks" if EXPERT @@ -852,6 +854,16 @@ config HARDEN_BRANCH_PREDICTOR If unsure, say Y. +config HARDEN_BRANCH_HISTORY + bool "Harden Spectre style attacks against branch history" if EXPERT + depends on CPU_SPECTRE + default y + help + Speculation attacks against some high-performance processors can + make use of branch history to influence future speculation. When + taking an exception, a sequence of branches overwrites the branch + history, or branch history is invalidated. + config TLS_REG_EMUL bool select NEED_KUSER_HELPERS diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5a3641b5ec2c..ff2cd985d20e 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -176,11 +176,22 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low, int pfn_valid(unsigned long pfn) { phys_addr_t addr = __pfn_to_phys(pfn); + unsigned long pageblock_size = PAGE_SIZE * pageblock_nr_pages; if (__phys_to_pfn(addr) != pfn) return 0; - return memblock_is_map_memory(__pfn_to_phys(pfn)); + /* + * If address less than pageblock_size bytes away from a present + * memory chunk there still will be a memory map entry for it + * because we round freed memory map to the pageblock boundaries. + */ + if (memblock_overlaps_region(&memblock.memory, + ALIGN_DOWN(addr, pageblock_size), + pageblock_size)) + return 1; + + return 0; } EXPORT_SYMBOL(pfn_valid); #endif @@ -371,14 +382,14 @@ static void __init free_unused_memmap(void) */ start = min(start, ALIGN(prev_end, PAGES_PER_SECTION)); -#else +#endif /* - * Align down here since the VM subsystem insists that the - * memmap entries are valid from the bank start aligned to - * MAX_ORDER_NR_PAGES. + * Align down here since many operations in VM subsystem + * presume that there are no holes in the memory map inside + * a pageblock */ - start = round_down(start, MAX_ORDER_NR_PAGES); -#endif + start = round_down(start, pageblock_nr_pages); + /* * If we had a previous bank, and there is a space * between the current bank and the previous, free it. @@ -387,18 +398,20 @@ static void __init free_unused_memmap(void) free_memmap(prev_end, start); /* - * Align up here since the VM subsystem insists that the - * memmap entries are valid from the bank end aligned to - * MAX_ORDER_NR_PAGES. + * Align up here since many operations in VM subsystem + * presume that there are no holes in the memory map inside + * a pageblock */ prev_end = ALIGN(memblock_region_memory_end_pfn(reg), - MAX_ORDER_NR_PAGES); + pageblock_nr_pages); } #ifdef CONFIG_SPARSEMEM - if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) + if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) { + prev_end = ALIGN(prev_end, pageblock_nr_pages); free_memmap(prev_end, ALIGN(prev_end, PAGES_PER_SECTION)); + } #endif } diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 5606c0e7fde4..a5386332e07e 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -27,6 +27,7 @@ #include <linux/vmalloc.h> #include <linux/io.h> #include <linux/sizes.h> +#include <linux/memblock.h> #include <asm/cp15.h> #include <asm/cputype.h> @@ -301,7 +302,8 @@ static void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, * Don't allow RAM to be mapped with mismatched attributes - this * causes problems with ARMv6+ */ - if (WARN_ON(pfn_valid(pfn) && mtype != MT_MEMORY_RW)) + if (WARN_ON(memblock_is_map_memory(PFN_PHYS(pfn)) && + mtype != MT_MEMORY_RW)) return NULL; area = get_vm_area_caller(size, VM_IOREMAP, caller); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 5be9cbf923e6..49ca6bcde90b 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -229,12 +229,14 @@ early_param("ecc", early_ecc); static int __init early_cachepolicy(char *p) { pr_warn("cachepolicy kernel parameter not supported without cp15\n"); + return 0; } early_param("cachepolicy", early_cachepolicy); static int __init noalign_setup(char *__unused) { pr_warn("noalign kernel parameter not supported without cp15\n"); + return 1; } __setup("noalign", noalign_setup); diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c index a6554fdb56c5..097ef85bb7f2 100644 --- a/arch/arm/mm/proc-v7-bugs.c +++ b/arch/arm/mm/proc-v7-bugs.c @@ -7,8 +7,35 @@ #include <asm/cp15.h> #include <asm/cputype.h> #include <asm/proc-fns.h> +#include <asm/spectre.h> #include <asm/system_misc.h> +#ifdef CONFIG_ARM_PSCI +static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void) +{ + struct arm_smccc_res res; + + arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, + ARM_SMCCC_ARCH_WORKAROUND_1, &res); + + switch ((int)res.a0) { + case SMCCC_RET_SUCCESS: + return SPECTRE_MITIGATED; + + case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED: + return SPECTRE_UNAFFECTED; + + default: + return SPECTRE_VULNERABLE; + } +} +#else +static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void) +{ + return SPECTRE_VULNERABLE; +} +#endif + #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR DEFINE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn); @@ -37,13 +64,61 @@ static void __maybe_unused call_hvc_arch_workaround_1(void) arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL); } -static void cpu_v7_spectre_init(void) +static unsigned int spectre_v2_install_workaround(unsigned int method) { const char *spectre_v2_method = NULL; int cpu = smp_processor_id(); if (per_cpu(harden_branch_predictor_fn, cpu)) - return; + return SPECTRE_MITIGATED; + + switch (method) { + case SPECTRE_V2_METHOD_BPIALL: + per_cpu(harden_branch_predictor_fn, cpu) = + harden_branch_predictor_bpiall; + spectre_v2_method = "BPIALL"; + break; + + case SPECTRE_V2_METHOD_ICIALLU: + per_cpu(harden_branch_predictor_fn, cpu) = + harden_branch_predictor_iciallu; + spectre_v2_method = "ICIALLU"; + break; + + case SPECTRE_V2_METHOD_HVC: + per_cpu(harden_branch_predictor_fn, cpu) = + call_hvc_arch_workaround_1; + cpu_do_switch_mm = cpu_v7_hvc_switch_mm; + spectre_v2_method = "hypervisor"; + break; + + case SPECTRE_V2_METHOD_SMC: + per_cpu(harden_branch_predictor_fn, cpu) = + call_smc_arch_workaround_1; + cpu_do_switch_mm = cpu_v7_smc_switch_mm; + spectre_v2_method = "firmware"; + break; + } + + if (spectre_v2_method) + pr_info("CPU%u: Spectre v2: using %s workaround\n", + smp_processor_id(), spectre_v2_method); + + return SPECTRE_MITIGATED; +} +#else +static unsigned int spectre_v2_install_workaround(unsigned int method) +{ + pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n", + smp_processor_id()); + + return SPECTRE_VULNERABLE; +} +#endif + +static void cpu_v7_spectre_v2_init(void) +{ + unsigned int state, method = 0; switch (read_cpuid_part()) { case ARM_CPU_PART_CORTEX_A8: @@ -52,32 +127,37 @@ static void cpu_v7_spectre_init(void) case ARM_CPU_PART_CORTEX_A17: case ARM_CPU_PART_CORTEX_A73: case ARM_CPU_PART_CORTEX_A75: - per_cpu(harden_branch_predictor_fn, cpu) = - harden_branch_predictor_bpiall; - spectre_v2_method = "BPIALL"; + state = SPECTRE_MITIGATED; + method = SPECTRE_V2_METHOD_BPIALL; break; case ARM_CPU_PART_CORTEX_A15: case ARM_CPU_PART_BRAHMA_B15: - per_cpu(harden_branch_predictor_fn, cpu) = - harden_branch_predictor_iciallu; - spectre_v2_method = "ICIALLU"; + state = SPECTRE_MITIGATED; + method = SPECTRE_V2_METHOD_ICIALLU; break; -#ifdef CONFIG_ARM_PSCI case ARM_CPU_PART_BRAHMA_B53: /* Requires no workaround */ + state = SPECTRE_UNAFFECTED; break; + default: /* Other ARM CPUs require no workaround */ - if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) + if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) { + state = SPECTRE_UNAFFECTED; break; + } /* fallthrough */ - /* Cortex A57/A72 require firmware workaround */ + /* Cortex A57/A72 require firmware workaround */ case ARM_CPU_PART_CORTEX_A57: case ARM_CPU_PART_CORTEX_A72: { struct arm_smccc_res res; + state = spectre_v2_get_cpu_fw_mitigation_state(); + if (state != SPECTRE_MITIGATED) + break; + if (psci_ops.smccc_version == SMCCC_VERSION_1_0) break; @@ -87,10 +167,7 @@ static void cpu_v7_spectre_init(void) ARM_SMCCC_ARCH_WORKAROUND_1, &res); if ((int)res.a0 != 0) break; - per_cpu(harden_branch_predictor_fn, cpu) = - call_hvc_arch_workaround_1; - cpu_do_switch_mm = cpu_v7_hvc_switch_mm; - spectre_v2_method = "hypervisor"; + method = SPECTRE_V2_METHOD_HVC; break; case PSCI_CONDUIT_SMC: @@ -98,29 +175,97 @@ static void cpu_v7_spectre_init(void) ARM_SMCCC_ARCH_WORKAROUND_1, &res); if ((int)res.a0 != 0) break; - per_cpu(harden_branch_predictor_fn, cpu) = - call_smc_arch_workaround_1; - cpu_do_switch_mm = cpu_v7_smc_switch_mm; - spectre_v2_method = "firmware"; + method = SPECTRE_V2_METHOD_SMC; break; default: + state = SPECTRE_VULNERABLE; break; } } -#endif } - if (spectre_v2_method) - pr_info("CPU%u: Spectre v2: using %s workaround\n", - smp_processor_id(), spectre_v2_method); + if (state == SPECTRE_MITIGATED) + state = spectre_v2_install_workaround(method); + + spectre_v2_update_state(state, method); +} + +#ifdef CONFIG_HARDEN_BRANCH_HISTORY +static int spectre_bhb_method; + +static const char *spectre_bhb_method_name(int method) +{ + switch (method) { + case SPECTRE_V2_METHOD_LOOP8: + return "loop"; + + case SPECTRE_V2_METHOD_BPIALL: + return "BPIALL"; + + default: + return "unknown"; + } +} + +static int spectre_bhb_install_workaround(int method) +{ + if (spectre_bhb_method != method) { + if (spectre_bhb_method) { + pr_err("CPU%u: Spectre BHB: method disagreement, system vulnerable\n", + smp_processor_id()); + + return SPECTRE_VULNERABLE; + } + + if (spectre_bhb_update_vectors(method) == SPECTRE_VULNERABLE) + return SPECTRE_VULNERABLE; + + spectre_bhb_method = method; + } + + pr_info("CPU%u: Spectre BHB: using %s workaround\n", + smp_processor_id(), spectre_bhb_method_name(method)); + + return SPECTRE_MITIGATED; } #else -static void cpu_v7_spectre_init(void) +static int spectre_bhb_install_workaround(int method) { + return SPECTRE_VULNERABLE; } #endif +static void cpu_v7_spectre_bhb_init(void) +{ + unsigned int state, method = 0; + + switch (read_cpuid_part()) { + case ARM_CPU_PART_CORTEX_A15: + case ARM_CPU_PART_BRAHMA_B15: + case ARM_CPU_PART_CORTEX_A57: + case ARM_CPU_PART_CORTEX_A72: + state = SPECTRE_MITIGATED; + method = SPECTRE_V2_METHOD_LOOP8; + break; + + case ARM_CPU_PART_CORTEX_A73: + case ARM_CPU_PART_CORTEX_A75: + state = SPECTRE_MITIGATED; + method = SPECTRE_V2_METHOD_BPIALL; + break; + + default: + state = SPECTRE_UNAFFECTED; + break; + } + + if (state == SPECTRE_MITIGATED) + state = spectre_bhb_install_workaround(method); + + spectre_v2_update_state(state, method); +} + static __maybe_unused bool cpu_v7_check_auxcr_set(bool *warned, u32 mask, const char *msg) { @@ -149,16 +294,17 @@ static bool check_spectre_auxcr(bool *warned, u32 bit) void cpu_v7_ca8_ibe(void) { if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(6))) - cpu_v7_spectre_init(); + cpu_v7_spectre_v2_init(); } void cpu_v7_ca15_ibe(void) { if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0))) - cpu_v7_spectre_init(); + cpu_v7_spectre_v2_init(); } void cpu_v7_bugs_init(void) { - cpu_v7_spectre_init(); + cpu_v7_spectre_v2_init(); + cpu_v7_spectre_bhb_init(); } |