summaryrefslogtreecommitdiff
path: root/arch/blackfin/include/asm/bfin5xx_spi.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/include/asm/bfin5xx_spi.h')
-rw-r--r--arch/blackfin/include/asm/bfin5xx_spi.h96
1 files changed, 25 insertions, 71 deletions
diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index ed4f8c6db0cd..0b5136e334b5 100644
--- a/arch/blackfin/include/asm/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -11,26 +11,17 @@
#define MIN_SPI_BAUD_VAL 2
-#define SPI_READ 0
-#define SPI_WRITE 1
-
-#define SPI_CTRL_OFF 0x0
-#define SPI_FLAG_OFF 0x4
-#define SPI_STAT_OFF 0x8
-#define SPI_TXBUFF_OFF 0xc
-#define SPI_RXBUFF_OFF 0x10
-#define SPI_BAUD_OFF 0x14
-#define SPI_SHAW_OFF 0x18
-
-
#define BIT_CTL_ENABLE 0x4000
#define BIT_CTL_OPENDRAIN 0x2000
#define BIT_CTL_MASTER 0x1000
-#define BIT_CTL_POLAR 0x0800
-#define BIT_CTL_PHASE 0x0400
-#define BIT_CTL_BITORDER 0x0200
+#define BIT_CTL_CPOL 0x0800
+#define BIT_CTL_CPHA 0x0400
+#define BIT_CTL_LSBF 0x0200
#define BIT_CTL_WORDSIZE 0x0100
-#define BIT_CTL_MISOENABLE 0x0020
+#define BIT_CTL_EMISO 0x0020
+#define BIT_CTL_PSSE 0x0010
+#define BIT_CTL_GM 0x0008
+#define BIT_CTL_SZ 0x0004
#define BIT_CTL_RXMOD 0x0000
#define BIT_CTL_TXMOD 0x0001
#define BIT_CTL_TIMOD_DMA_TX 0x0003
@@ -50,61 +41,26 @@
#define BIT_STU_SENDOVER 0x0001
#define BIT_STU_RECVFULL 0x0020
-#define CFG_SPI_ENABLE 1
-#define CFG_SPI_DISABLE 0
-
-#define CFG_SPI_OUTENABLE 1
-#define CFG_SPI_OUTDISABLE 0
-
-#define CFG_SPI_ACTLOW 1
-#define CFG_SPI_ACTHIGH 0
-
-#define CFG_SPI_PHASESTART 1
-#define CFG_SPI_PHASEMID 0
-
-#define CFG_SPI_MASTER 1
-#define CFG_SPI_SLAVE 0
-
-#define CFG_SPI_SENELAST 0
-#define CFG_SPI_SENDZERO 1
-
-#define CFG_SPI_RCVFLUSH 1
-#define CFG_SPI_RCVDISCARD 0
-
-#define CFG_SPI_LSBFIRST 1
-#define CFG_SPI_MSBFIRST 0
-
-#define CFG_SPI_WORDSIZE16 1
-#define CFG_SPI_WORDSIZE8 0
-
-#define CFG_SPI_MISOENABLE 1
-#define CFG_SPI_MISODISABLE 0
-
-#define CFG_SPI_READ 0x00
-#define CFG_SPI_WRITE 0x01
-#define CFG_SPI_DMAREAD 0x02
-#define CFG_SPI_DMAWRITE 0x03
-
-#define CFG_SPI_CSCLEARALL 0
-#define CFG_SPI_CHIPSEL1 1
-#define CFG_SPI_CHIPSEL2 2
-#define CFG_SPI_CHIPSEL3 3
-#define CFG_SPI_CHIPSEL4 4
-#define CFG_SPI_CHIPSEL5 5
-#define CFG_SPI_CHIPSEL6 6
-#define CFG_SPI_CHIPSEL7 7
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits. So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
-#define CFG_SPI_CS1VALUE 1
-#define CFG_SPI_CS2VALUE 2
-#define CFG_SPI_CS3VALUE 3
-#define CFG_SPI_CS4VALUE 4
-#define CFG_SPI_CS5VALUE 5
-#define CFG_SPI_CS6VALUE 6
-#define CFG_SPI_CS7VALUE 7
+/*
+ * bfin spi registers layout
+ */
+struct bfin_spi_regs {
+ __BFP(ctl);
+ __BFP(flg);
+ __BFP(stat);
+ __BFP(tdbr);
+ __BFP(rdbr);
+ __BFP(baud);
+ __BFP(shadow);
+};
-#define CMD_SPI_SET_BAUDRATE 2
-#define CMD_SPI_GET_SYSTEMCLOCK 25
-#define CMD_SPI_SET_WRITECONTINUOUS 26
+#define MAX_CTRL_CS 8 /* cs in spi controller */
/* device.platform_data for SSP controller devices */
struct bfin5xx_spi_master {
@@ -120,9 +76,7 @@ struct bfin5xx_spi_chip {
u16 ctl_reg;
u8 enable_dma;
u8 bits_per_word;
- u8 cs_change_per_word;
u16 cs_chg_udelay; /* Some devices require 16-bit delays */
- u32 cs_gpio;
/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
u16 idle_tx_val;
u8 pio_interrupt; /* Enable spi data irq */