diff options
Diffstat (limited to 'arch/m32r')
47 files changed, 221 insertions, 17967 deletions
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index c3bb8a755b00..bd5fe76401f1 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -31,6 +31,9 @@ config GENERIC_IRQ_PROBE config NO_IOPORT def_bool y +config NO_DMA + def_bool y + source "init/Kconfig" @@ -54,9 +57,13 @@ config PLAT_MAPPI config PLAT_USRV bool "uServer" + select PLAT_HAS_INT1ICU config PLAT_M32700UT bool "M32700UT" + select PLAT_HAS_INT0ICU + select PLAT_HAS_INT1ICU + select PLAT_HAS_INT2ICU help The M3T-M32700UT is an evaluation board based on uT-Engine specification. This board has an M32700 (Chaos) evaluation chip. @@ -65,6 +72,9 @@ config PLAT_M32700UT config PLAT_OPSPUT bool "OPSPUT" + select PLAT_HAS_INT0ICU + select PLAT_HAS_INT1ICU + select PLAT_HAS_INT2ICU help The OPSPUT is an evaluation board based on uT-Engine specification. This board has a OPSP-REP chip. @@ -86,6 +96,7 @@ config PLAT_MAPPI3 config PLAT_M32104UT bool "M32104UT" + select PLAT_HAS_INT1ICU help The M3T-M32104UT is an reference board based on uT-Engine specification. This board has a M32104 chip. @@ -146,6 +157,18 @@ config ISA_DUAL_ISSUE depends on CHIP_M32700 || CHIP_OPSP default y +config PLAT_HAS_INT0ICU + bool + default n + +config PLAT_HAS_INT1ICU + bool + default n + +config PLAT_HAS_INT2ICU + bool + default n + config BUS_CLOCK int "Bus Clock [Hz] (integer)" default "70000000" if PLAT_MAPPI diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile index cdf63b210c53..60e12f312654 100644 --- a/arch/m32r/Makefile +++ b/arch/m32r/Makefile @@ -36,7 +36,8 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) libs-y += arch/m32r/lib/ $(LIBGCC) core-y += arch/m32r/kernel/ \ arch/m32r/mm/ \ - arch/m32r/boot/ + arch/m32r/boot/ \ + arch/m32r/platforms/ drivers-$(CONFIG_OPROFILE) += arch/m32r/oprofile/ diff --git a/arch/m32r/defconfig b/arch/m32r/defconfig index 13579917afef..af3b98179113 100644 --- a/arch/m32r/defconfig +++ b/arch/m32r/defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Tue Dec 12 17:52:38 2006 +# Linux kernel version: 2.6.23-rc1 +# Wed Aug 1 17:22:35 2007 # CONFIG_M32R=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,19 +26,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -47,17 +51,18 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -65,12 +70,11 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -123,13 +127,19 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_IRAM_START=0x00f00000 CONFIG_IRAM_SIZE=0x00080000 CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PREEMPT=y CONFIG_SMP=y # CONFIG_CHIP_M32700_TS1 is not set @@ -139,6 +149,7 @@ CONFIG_NODES_SHIFT=1 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_ISA is not set # @@ -147,10 +158,6 @@ CONFIG_NODES_SHIFT=1 # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -164,13 +171,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -203,20 +210,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -242,7 +237,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -255,15 +260,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -278,6 +275,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -314,7 +312,6 @@ CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -337,29 +334,15 @@ CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -368,18 +351,10 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -395,14 +370,15 @@ CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -410,6 +386,8 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -430,6 +408,8 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -437,79 +417,31 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_NE2000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -517,15 +449,7 @@ CONFIG_SMC91X=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -533,6 +457,7 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -549,6 +474,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -587,35 +513,14 @@ CONFIG_SERIAL_M32R_PLDSIO=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_RTC is not set CONFIG_DS1302=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -623,65 +528,76 @@ CONFIG_DS1302=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set CONFIG_VIDEO_M32R_AR=m CONFIG_VIDEO_M32R_AR_M64278=m +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_S1D13XXX=y # CONFIG_FB_VIRTUAL is not set @@ -691,29 +607,25 @@ CONFIG_FB_S1D13XXX=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_M32R_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -726,35 +638,20 @@ CONFIG_LOGO_M32R_CLUT224=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# CONFIG_MMC=y CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_TIFM_SD is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# +# CONFIG_MMC_UNSAFE_RESUME is not set # -# LED Triggers -# - -# -# InfiniBand support +# MMC/SD Card Drivers # +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# MMC/SD Host Controller Drivers # +# CONFIG_NEW_LEDS is not set # # Real Time Clock @@ -762,17 +659,9 @@ CONFIG_MMC_BLOCK=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -849,7 +738,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -872,6 +760,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -879,7 +768,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -932,6 +820,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -944,29 +837,27 @@ CONFIG_OPROFILE=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index 5a2fa886906f..e97e26e87c9e 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -8,14 +8,6 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o obj-$(CONFIG_SMP) += smp.o smpboot.o -obj-$(CONFIG_PLAT_MAPPI) += setup_mappi.o io_mappi.o -obj-$(CONFIG_PLAT_MAPPI2) += setup_mappi2.o io_mappi2.o -obj-$(CONFIG_PLAT_MAPPI3) += setup_mappi3.o io_mappi3.o -obj-$(CONFIG_PLAT_USRV) += setup_usrv.o io_usrv.o -obj-$(CONFIG_PLAT_M32700UT) += setup_m32700ut.o io_m32700ut.o -obj-$(CONFIG_PLAT_OPSPUT) += setup_opsput.o io_opsput.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_PLAT_OAKS32R) += setup_oaks32r.o io_oaks32r.o -obj-$(CONFIG_PLAT_M32104UT) += setup_m32104ut.o io_m32104ut.o EXTRA_AFLAGS := -traditional diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S index a2c472c0549f..d4eaa2fd1818 100644 --- a/arch/m32r/kernel/entry.S +++ b/arch/m32r/kernel/entry.S @@ -109,15 +109,10 @@ #define SP(reg) @(0x68,reg) #define ORIG_R0(reg) @(0x6C,reg) -CF_MASK = 0x00000001 -TF_MASK = 0x00000100 -IF_MASK = 0x00000200 -DF_MASK = 0x00000400 -NT_MASK = 0x00004000 -VM_MASK = 0x00020000 +#define nr_syscalls ((syscall_table_size)/4) #ifdef CONFIG_PREEMPT -#define preempt_stop(x) CLI(x) +#define preempt_stop(x) DISABLE_INTERRUPTS(x) #else #define preempt_stop(x) #define resume_kernel restore_all @@ -149,7 +144,7 @@ ret_from_intr: #endif beqz r4, resume_kernel ENTRY(resume_userspace) - CLI(r4) ; make sure we don't miss an interrupt + DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret GET_THREAD_INFO(r8) @@ -173,11 +168,11 @@ need_resched: beqz r4, restore_all LDIMM (r4, PREEMPT_ACTIVE) st r4, @(TI_PRE_COUNT, r8) - STI(r4) + ENABLE_INTERRUPTS(r4) bl schedule ldi r4, #0 st r4, @(TI_PRE_COUNT, r8) - CLI(r4) + DISABLE_INTERRUPTS(r4) bra need_resched #endif @@ -185,7 +180,7 @@ need_resched: ENTRY(system_call) SWITCH_TO_KERNEL_STACK SAVE_ALL - STI(r4) ; Enable interrupt + ENABLE_INTERRUPTS(r4) ; Enable interrupt st sp, PTREGS(sp) ; implicit pt_regs parameter cmpui r7, #NR_syscalls bnc syscall_badsys @@ -203,7 +198,7 @@ syscall_call: jl r7 ; execute system call st r0, R0(sp) ; save the return value syscall_exit: - CLI(r4) ; make sure we don't miss an interrupt + DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret ld r9, @(TI_FLAGS, r8) @@ -220,7 +215,7 @@ work_pending: beqz r4, work_notifysig work_resched: bl schedule - CLI(r4) ; make sure we don't miss an interrupt + DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret ld r9, @(TI_FLAGS, r8) @@ -262,7 +257,7 @@ syscall_exit_work: ld r9, @(TI_FLAGS, r8) and3 r4, r9, #_TIF_SYSCALL_TRACE beqz r4, work_pending - STI(r4) ; could let do_syscall_trace() call + ENABLE_INTERRUPTS(r4) ; could let do_syscall_trace() call ; schedule() instead bl do_syscall_trace bra resume_userspace @@ -290,16 +285,12 @@ syscall_badsys: */ ENTRY(ei_handler) #if defined(CONFIG_CHIP_M32700) - SWITCH_TO_KERNEL_STACK ; WORKAROUND: force to clear SM bit and use the kernel stack (SPI). + SWITCH_TO_KERNEL_STACK #endif SAVE_ALL mv r1, sp ; arg1(regs) -#if defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \ - || defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \ - || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104) - -; GET_ICU_STATUS; + ; get ICU status seth r0, #shigh(M32R_ICU_ISTS_ADDR) ld r0, @(low(M32R_ICU_ISTS_ADDR),r0) push r0 @@ -314,10 +305,15 @@ ENTRY(ei_handler) ;; IRQ exist check #if defined(CONFIG_CHIP_M32700) /* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */ - beqz r0, 3f ; if (!irq_num) goto exit -#else + bnez r0, 0f + ld24 r14, #0x00070000 + seth r0, #shigh(M32R_ICU_IMASK_ADDR) + st r14, @(low(M32R_ICU_IMASK_ADDR),r0) + bra 1f + .fillinsn +0: +#endif /* CONFIG_CHIP_M32700 */ beqz r0, 1f ; if (!irq_num) goto exit -#endif /* WORKAROUND */ ;; IPI check cmpi r0, #(M32R_IRQ_IPI0<<2) ; ISN < IPI0 check bc 2f @@ -332,220 +328,56 @@ ENTRY(ei_handler) .fillinsn 1: addi sp, #4 - bra ret_to_intr -#if defined(CONFIG_CHIP_M32700) - /* WORKAROUND: IMASK bug M32700-TS1, TS2 chip. */ - .fillinsn -3: - ld24 r14, #0x00070000 - seth r0, #shigh(M32R_ICU_IMASK_ADDR) - st r14, @(low(M32R_ICU_IMASK_ADDR), r0) - addi sp, #4 - bra ret_to_intr -#endif /* WORKAROUND */ - ;; do_IRQ + bra restore_all .fillinsn 2: srli r0, #2 -#if defined(CONFIG_PLAT_USRV) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, 9f - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(M32700UT_PLD_IRQ_BASE) - .fillinsn -9: -#elif defined(CONFIG_PLAT_M32700UT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_int0 - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(M32700UT_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int0: - add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt - bnez r2, check_int2 - ; read ICU status of LAN-board - seth r0, #high(M32700UT_LAN_ICUISTS) - or3 r0, r0, #low(M32700UT_LAN_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(M32700UT_LAN_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int2: - add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt - bnez r2, check_end - ; read ICU status of LCD-board - seth r0, #high(M32700UT_LCD_ICUISTS) - or3 r0, r0, #low(M32700UT_LCD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(M32700UT_LCD_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_end: -#elif defined(CONFIG_PLAT_OPSPUT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_int0 - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(OPSPUT_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int0: - add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt - bnez r2, check_int2 - ; read ICU status of LAN-board - seth r0, #high(OPSPUT_LAN_ICUISTS) - or3 r0, r0, #low(OPSPUT_LAN_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(OPSPUT_LAN_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int2: - add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt - bnez r2, check_end - ; read ICU status of LCD-board - seth r0, #high(OPSPUT_LCD_ICUISTS) - or3 r0, r0, #low(OPSPUT_LCD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(OPSPUT_LCD_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_end: -#endif /* CONFIG_PLAT_OPSPUT */ - bl do_IRQ ; r0(irq), r1(regs) -#else /* not CONFIG_SMP */ +#else /* not CONFIG_SMP */ srli r0, #22 ; r0(irq) -#if defined(CONFIG_PLAT_USRV) +#endif /* not CONFIG_SMP */ + +#if defined(CONFIG_PLAT_HAS_INT1ICU) add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, 1f - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 + bnez r2, 3f + seth r0, #shigh(M32R_INT1ICU_ISTS) + lduh r0, @(low(M32R_INT1ICU_ISTS),r0) ; bit10-6 : ISN slli r0, #21 srli r0, #27 ; ISN - addi r0, #(M32700UT_PLD_IRQ_BASE) - .fillinsn -1: -#elif defined(CONFIG_PLAT_M32700UT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_int0 - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(M32700UT_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int0: - add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt - bnez r2, check_int2 - ; read ICU status of LAN-board - seth r0, #high(M32700UT_LAN_ICUISTS) - or3 r0, r0, #low(M32700UT_LAN_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(M32700UT_LAN_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int2: - add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt - bnez r2, check_end - ; read ICU status of LCD-board - seth r0, #high(M32700UT_LCD_ICUISTS) - or3 r0, r0, #low(M32700UT_LCD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(M32700UT_LCD_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_end: -#elif defined(CONFIG_PLAT_OPSPUT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_int0 - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(OPSPUT_PLD_IRQ_BASE) - bra check_end - .fillinsn -check_int0: - add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt - bnez r2, check_int2 - ; read ICU status of LAN-board - seth r0, #high(OPSPUT_LAN_ICUISTS) - or3 r0, r0, #low(OPSPUT_LAN_ICUISTS) - lduh r0, @r0 - slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(OPSPUT_LAN_PLD_IRQ_BASE) + addi r0, #(M32R_INT1ICU_IRQ_BASE) bra check_end .fillinsn -check_int2: - add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt - bnez r2, check_end - ; read ICU status of LCD-board - seth r0, #high(OPSPUT_LCD_ICUISTS) - or3 r0, r0, #low(OPSPUT_LCD_ICUISTS) - lduh r0, @r0 +3: +#endif /* CONFIG_PLAT_HAS_INT1ICU */ +#if defined(CONFIG_PLAT_HAS_INT0ICU) + add3 r2, r0, #-(M32R_IRQ_INT0) ; INT0# interrupt + bnez r2, 4f + seth r0, #shigh(M32R_INT0ICU_ISTS) + lduh r0, @(low(M32R_INT0ICU_ISTS),r0) ; bit10-6 : ISN slli r0, #21 - srli r0, #27 ; ISN - add3 r0, r0, #(OPSPUT_LCD_PLD_IRQ_BASE) + srli r0, #27 ; ISN + add3 r0, r0, #(M32R_INT0ICU_IRQ_BASE) bra check_end .fillinsn -check_end: -#elif defined(CONFIG_PLAT_M32104UT) - add3 r2, r0, #-(M32R_IRQ_INT1) ; INT1# interrupt - bnez r2, check_end - ; read ICU status register of PLD - seth r0, #high(PLD_ICUISTS) - or3 r0, r0, #low(PLD_ICUISTS) - lduh r0, @r0 +4: +#endif /* CONFIG_PLAT_HAS_INT0ICU */ +#if defined(CONFIG_PLAT_HAS_INT2ICU) + add3 r2, r0, #-(M32R_IRQ_INT2) ; INT2# interrupt + bnez r2, 5f + seth r0, #shigh(M32R_INT2ICU_ISTS) + lduh r0, @(low(M32R_INT2ICU_ISTS),r0) ; bit10-6 : ISN slli r0, #21 - srli r0, #27 ; ISN - addi r0, #(M32104UT_PLD_IRQ_BASE) - bra check_end + srli r0, #27 ; ISN + add3 r0, r0, #(M32R_INT2ICU_IRQ_BASE) + ; bra check_end .fillinsn +5: +#endif /* CONFIG_PLAT_HAS_INT2ICU */ + check_end: -#endif /* CONFIG_PLAT_M32104UT */ bl do_IRQ -#endif /* CONFIG_SMP */ pop r14 seth r0, #shigh(M32R_ICU_IMASK_ADDR) st r14, @(low(M32R_ICU_IMASK_ADDR),r0) -#else -#error no chip configuration -#endif -ret_to_intr: bra ret_from_intr /* @@ -631,7 +463,7 @@ inst: ENTRY(alignment_check) -/* void alignment_check(int error_code) */ + /* void alignment_check(int error_code) */ SWITCH_TO_KERNEL_STACK SAVE_ALL ldi r1, #0x30 ; error_code @@ -641,7 +473,7 @@ error_code: bra ret_from_exception ENTRY(rie_handler) -/* void rie_handler(int error_code) */ + /* void rie_handler(int error_code) */ SWITCH_TO_KERNEL_STACK SAVE_ALL ldi r1, #0x20 ; error_code @@ -650,7 +482,7 @@ ENTRY(rie_handler) bra error_code ENTRY(pie_handler) -/* void pie_handler(int error_code) */ + /* void pie_handler(int error_code) */ SWITCH_TO_KERNEL_STACK SAVE_ALL ldi r1, #0 ; error_code ; FIXME @@ -659,8 +491,8 @@ ENTRY(pie_handler) bra error_code ENTRY(debug_trap) - .global withdraw_debug_trap /* void debug_trap(void) */ + .global withdraw_debug_trap SWITCH_TO_KERNEL_STACK SAVE_ALL mv r0, sp ; pt_regs @@ -679,11 +511,9 @@ ENTRY(ill_trap) bl do_ill_trap bra error_code - -/* Cache flushing handler */ ENTRY(cache_flushing_handler) - .global _flush_cache_all /* void _flush_cache_all(void); */ + .global _flush_cache_all SWITCH_TO_KERNEL_STACK push r0 push r1 @@ -706,292 +536,7 @@ ENTRY(cache_flushing_handler) pop r0 rte -.data -ENTRY(sys_call_table) - .long sys_restart_syscall /* 0 - old "setup()" system call*/ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_ni_syscall /* lchown16 syscall holder */ - .long sys_ni_syscall /* old break syscall holder */ - .long sys_ni_syscall /* old stat syscall holder */ - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_ni_syscall /* setuid16 syscall holder */ - .long sys_ni_syscall /* getuid16 syscall holder */ - .long sys_stime /* 25 */ - .long sys_ptrace - .long sys_alarm - .long sys_ni_syscall /* old fstat syscall holder */ - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_cachectl /* for M32R */ /* old gtty syscall holder */ - .long sys_access - .long sys_ni_syscall /* nice syscall holder */ - .long sys_ni_syscall /* 35 - old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_ni_syscall /* setgid16 syscall holder */ - .long sys_getgid /* will be unused */ - .long sys_ni_syscall /* signal syscall holder */ - .long sys_ni_syscall /* geteuid16 syscall holder */ - .long sys_ni_syscall /* 50 - getegid16 syscall holder */ - .long sys_acct - .long sys_umount /* recycled never used phys() */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 - will be unused */ - .long sys_ni_syscall /* mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* sys_olduname */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_ni_syscall /* sigaction syscall holder */ - .long sys_ni_syscall /* sgetmask syscall holder */ - .long sys_ni_syscall /* ssetmask syscall holder */ - .long sys_ni_syscall /* 70 - setreuid16 syscall holder */ - .long sys_ni_syscall /* setregid16 syscall holder */ - .long sys_ni_syscall /* sigsuspend syscall holder */ - .long sys_ni_syscall /* sigpending syscall holder */ - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_getrlimit/*will be unused*/ - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_ni_syscall /* 80 - getgroups16 syscall holder */ - .long sys_ni_syscall /* setgroups16 syscall holder */ - .long sys_ni_syscall /* sys_oldselect */ - .long sys_symlink - .long sys_ni_syscall /* old lstat syscall holder */ - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long sys_ni_syscall /* readdir syscall holder */ - .long sys_ni_syscall /* 90 - old_mmap syscall holder */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_ni_syscall /* 95 - fchwon16 syscall holder */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm syscall holder */ - .long sys_socketcall - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_ni_syscall /* old uname syscall holder */ - .long sys_ni_syscall /* 110 - iopl syscall holder */ - .long sys_vhangup - .long sys_ni_syscall /* idle syscall holder */ - .long sys_ni_syscall /* vm86old syscall holder */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc - .long sys_fsync - .long sys_ni_syscall /* sigreturn syscall holder */ - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall /* modify_ldt syscall holder */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_ni_syscall /* sigprocmask syscall holder */ - .long sys_ni_syscall /* create_module syscall holder */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130 - get_kernel_syms */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* afs_syscall syscall holder */ - .long sys_ni_syscall /* setfsuid16 syscall holder */ - .long sys_ni_syscall /* setfsgid16 syscall holder */ - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_ni_syscall /* setresuid16 syscall holder */ - .long sys_ni_syscall /* 165 - getresuid16 syscall holder */ - .long sys_tas /* vm86 syscall holder */ - .long sys_ni_syscall /* query_module syscall holder */ - .long sys_poll - .long sys_nfsservctl - .long sys_setresgid /* 170 */ - .long sys_getresgid - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread64 /* 180 */ - .long sys_pwrite64 - .long sys_ni_syscall /* chown16 syscall holder */ - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - .long sys_getdents64 /* 220 */ - .long sys_fcntl64 - .long sys_ni_syscall /* reserved for TUX */ - .long sys_ni_syscall /* Reserved for Security */ - .long sys_gettid - .long sys_readahead /* 225 */ - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr /* 230 */ - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr /* 235 */ - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_tkill - .long sys_sendfile64 - .long sys_futex /* 240 */ - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_ni_syscall /* reserved for "set_thread_area" system call */ - .long sys_ni_syscall /* reserved for "get_thread_area" system call */ - .long sys_io_setup /* 245 */ - .long sys_io_destroy - .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 /* 250 */ - .long sys_ni_syscall - .long sys_exit_group - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl /* 255 */ - .long sys_epoll_wait - .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ - .long sys_utimes - .long sys_fadvise64_64 - .long sys_ni_syscall /* Reserved for sys_vserver */ - .long sys_ni_syscall /* Reserved for sys_mbind */ - .long sys_ni_syscall /* Reserved for sys_get_mempolicy */ - .long sys_ni_syscall /* Reserved for sys_set_mempolicy */ - .long sys_mq_open - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive /* 280 */ - .long sys_mq_notify - .long sys_mq_getsetattr - .long sys_ni_syscall /* reserved for kexec */ - .long sys_waitid + .section .rodata,"a" +#include "syscall_table.S" syscall_table_size=(.-sys_call_table) diff --git a/arch/m32r/kernel/io_m32104ut.c b/arch/m32r/kernel/io_m32104ut.c deleted file mode 100644 index 2189eca30b56..000000000000 --- a/arch/m32r/kernel/io_m32104ut.c +++ /dev/null @@ -1,297 +0,0 @@ -/* - * linux/arch/m32r/kernel/io_m32104ut.c - * - * Typical I/O routines for M32104UT board. - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa, - * Naoto Sugai, Hayato Fujiwara - */ - -#include <asm/m32r.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) -#include <linux/types.h> - -#define M32R_PCC_IOMAP_SIZE 0x1000 - -#define M32R_PCC_IOSTART0 0x1000 -#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) - -extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ - -#define PORT2ADDR(port) _port2addr(port) - -static inline void *_port2addr(unsigned long port) -{ - return (void *)(port | NONCACHE_OFFSET); -} - -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) -static inline void *__port2addr_ata(unsigned long port) -{ - static int dummy_reg; - - switch (port) { - case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); - case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); - case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); - case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); - case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); - case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); - case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); - case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); - case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); - default: return (void *)&dummy_reg; - } -} -#endif - -/* - * M32104T-LAN is located in the extended bus space - * from 0x01000000 to 0x01ffffff on physical address. - * The base address of LAN controller(LAN91C111) is 0x300. - */ -#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) -#define LAN_IOEND (0x320 | NONCACHE_OFFSET) -static inline void *_port2addr_ne(unsigned long port) -{ - return (void *)(port + NONCACHE_OFFSET + 0x01000000); -} - -static inline void delay(void) -{ - __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); -} - -/* - * NIC I/O function - */ - -#define PORT2ADDR_NE(port) _port2addr_ne(port) - -static inline unsigned char _ne_inb(void *portp) -{ - return *(volatile unsigned char *)portp; -} - -static inline unsigned short _ne_inw(void *portp) -{ - return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); -} - -static inline void _ne_insb(void *portp, void *addr, unsigned long count) -{ - unsigned char *buf = (unsigned char *)addr; - - while (count--) - *buf++ = _ne_inb(portp); -} - -static inline void _ne_outb(unsigned char b, void *portp) -{ - *(volatile unsigned char *)portp = b; -} - -static inline void _ne_outw(unsigned short w, void *portp) -{ - *(volatile unsigned short *)portp = cpu_to_le16(w); -} - -unsigned char _inb(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inb(PORT2ADDR_NE(port)); - - return *(volatile unsigned char *)PORT2ADDR(port); -} - -unsigned short _inw(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inw(PORT2ADDR_NE(port)); - - return *(volatile unsigned short *)PORT2ADDR(port); -} - -unsigned long _inl(unsigned long port) -{ - return *(volatile unsigned long *)PORT2ADDR(port); -} - -unsigned char _inb_p(unsigned long port) -{ - unsigned char v = _inb(port); - delay(); - return (v); -} - -unsigned short _inw_p(unsigned long port) -{ - unsigned short v = _inw(port); - delay(); - return (v); -} - -unsigned long _inl_p(unsigned long port) -{ - unsigned long v = _inl(port); - delay(); - return (v); -} - -void _outb(unsigned char b, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; -} - -void _outw(unsigned short w, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; -} - -void _outl(unsigned long l, unsigned long port) -{ - *(volatile unsigned long *)PORT2ADDR(port) = l; -} - -void _outb_p(unsigned char b, unsigned long port) -{ - _outb(b, port); - delay(); -} - -void _outw_p(unsigned short w, unsigned long port) -{ - _outw(w, port); - delay(); -} - -void _outl_p(unsigned long l, unsigned long port) -{ - _outl(l, port); - delay(); -} - -void _insb(unsigned int port, void *addr, unsigned long count) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_insb(PORT2ADDR_NE(port), addr, count); - else { - unsigned char *buf = addr; - unsigned char *portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -} - -void _insw(unsigned int port, void *addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - /* - * This portion is only used by smc91111.c to read data - * from the DATA_REG. Do not swap the data. - */ - portp = PORT2ADDR_NE(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; - } -} - -void _insl(unsigned int port, void *addr, unsigned long count) -{ - unsigned long *buf = addr; - unsigned long *portp; - - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned long *)portp; -} - -void _outsb(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned char *buf = addr; - unsigned char *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outb(*buf++, portp); - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; - } -} - -void _outsw(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - /* - * This portion is only used by smc91111.c to write data - * into the DATA_REG. Do not swap the data. - */ - portp = PORT2ADDR_NE(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; - } -} - -void _outsl(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned long *buf = addr; - unsigned char *portp; - - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned long *)portp = *buf++; -} diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/kernel/io_m32700ut.c deleted file mode 100644 index 5898f4031a0c..000000000000 --- a/arch/m32r/kernel/io_m32700ut.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * linux/arch/m32r/kernel/io_m32700ut.c - * - * Typical I/O routines for M32700UT board. - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - */ - -#include <asm/m32r.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) -#include <linux/types.h> - -#define M32R_PCC_IOMAP_SIZE 0x1000 - -#define M32R_PCC_IOSTART0 0x1000 -#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) - -extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ - -#define PORT2ADDR(port) _port2addr(port) -#define PORT2ADDR_USB(port) _port2addr_usb(port) - -static inline void *_port2addr(unsigned long port) -{ - return (void *)(port | NONCACHE_OFFSET); -} - -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) -static inline void *__port2addr_ata(unsigned long port) -{ - static int dummy_reg; - - switch (port) { - case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); - case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); - case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); - case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); - case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); - case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); - case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); - case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); - case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); - default: return (void *)&dummy_reg; - } -} -#endif - -/* - * M32700UT-LAN is located in the extended bus space - * from 0x10000000 to 0x13ffffff on physical address. - * The base address of LAN controller(LAN91C111) is 0x300. - */ -#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) -#define LAN_IOEND (0x320 | NONCACHE_OFFSET) -static inline void *_port2addr_ne(unsigned long port) -{ - return (void *)(port + 0x10000000); -} -static inline void *_port2addr_usb(unsigned long port) -{ - return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000); -} - -static inline void delay(void) -{ - __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); -} - -/* - * NIC I/O function - */ - -#define PORT2ADDR_NE(port) _port2addr_ne(port) - -static inline unsigned char _ne_inb(void *portp) -{ - return *(volatile unsigned char *)portp; -} - -static inline unsigned short _ne_inw(void *portp) -{ - return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); -} - -static inline void _ne_insb(void *portp, void *addr, unsigned long count) -{ - unsigned char *buf = (unsigned char *)addr; - - while (count--) - *buf++ = _ne_inb(portp); -} - -static inline void _ne_outb(unsigned char b, void *portp) -{ - *(volatile unsigned char *)portp = b; -} - -static inline void _ne_outw(unsigned short w, void *portp) -{ - *(volatile unsigned short *)portp = cpu_to_le16(w); -} - -unsigned char _inb(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inb(PORT2ADDR_NE(port)); - -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - - return *(volatile unsigned char *)PORT2ADDR(port); -} - -unsigned short _inw(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inw(PORT2ADDR_NE(port)); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } -#endif -#if defined(CONFIG_USB) - else if(port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - return *(volatile unsigned short *)PORT2ADDR(port); -} - -unsigned long _inl(unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned long l; - pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); - return l; - } else -#endif - return *(volatile unsigned long *)PORT2ADDR(port); -} - -unsigned char _inb_p(unsigned long port) -{ - unsigned char v = _inb(port); - delay(); - return (v); -} - -unsigned short _inw_p(unsigned long port) -{ - unsigned short v = _inw(port); - delay(); - return (v); -} - -unsigned long _inl_p(unsigned long port) -{ - unsigned long v = _inl(port); - delay(); - return (v); -} - -void _outb(unsigned char b, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; -} - -void _outw(unsigned short w, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; -} - -void _outl(unsigned long l, unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); - } else -#endif - *(volatile unsigned long *)PORT2ADDR(port) = l; -} - -void _outb_p(unsigned char b, unsigned long port) -{ - _outb(b, port); - delay(); -} - -void _outw_p(unsigned short w, unsigned long port) -{ - _outw(w, port); - delay(); -} - -void _outl_p(unsigned long l, unsigned long port) -{ - _outl(l, port); - delay(); -} - -void _insb(unsigned int port, void *addr, unsigned long count) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_insb(PORT2ADDR_NE(port), addr, count); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - unsigned char *buf = addr; - unsigned char *portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); - } -#endif - else { - unsigned char *buf = addr; - unsigned char *portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -} - -void _insw(unsigned int port, void *addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - /* - * This portion is only used by smc91111.c to read data - * from the DATA_REG. Do not swap the data. - */ - portp = PORT2ADDR_NE(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; - } -} - -void _insl(unsigned int port, void *addr, unsigned long count) -{ - unsigned long *buf = addr; - unsigned long *portp; - - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned long *)portp; -} - -void _outsb(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned char *buf = addr; - unsigned char *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outb(*buf++, portp); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; - } -} - -void _outsw(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - /* - * This portion is only used by smc91111.c to write data - * into the DATA_REG. Do not swap the data. - */ - portp = PORT2ADDR_NE(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; - } -} - -void _outsl(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned long *buf = addr; - unsigned char *portp; - - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned long *)portp = *buf++; -} diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/kernel/io_mappi.c deleted file mode 100644 index 31396789ab1b..000000000000 --- a/arch/m32r/kernel/io_mappi.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * linux/arch/m32r/kernel/io_mappi.c - * - * Typical I/O routines for Mappi board. - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto - */ - -#include <asm/m32r.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) -#include <linux/types.h> - -#define M32R_PCC_IOMAP_SIZE 0x1000 - -#define M32R_PCC_IOSTART0 0x1000 -#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) -#define M32R_PCC_IOSTART1 0x2000 -#define M32R_PCC_IOEND1 (M32R_PCC_IOSTART1 + M32R_PCC_IOMAP_SIZE - 1) - -extern void pcc_ioread(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_M32R_PCC */ - -#define PORT2ADDR(port) _port2addr(port) - -static inline void *_port2addr(unsigned long port) -{ - return (void *)(port | NONCACHE_OFFSET); -} - -static inline void *_port2addr_ne(unsigned long port) -{ - return (void *)((port<<1) + NONCACHE_OFFSET + 0x0C000000); -} - -static inline void delay(void) -{ - __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); -} - -/* - * NIC I/O function - */ - -#define PORT2ADDR_NE(port) _port2addr_ne(port) - -static inline unsigned char _ne_inb(void *portp) -{ - return (unsigned char) *(volatile unsigned short *)portp; -} - -static inline unsigned short _ne_inw(void *portp) -{ - unsigned short tmp; - - tmp = *(volatile unsigned short *)portp; - return le16_to_cpu(tmp); -} - -static inline void _ne_outb(unsigned char b, void *portp) -{ - *(volatile unsigned short *)portp = (unsigned short)b; -} - -static inline void _ne_outw(unsigned short w, void *portp) -{ - *(volatile unsigned short *)portp = cpu_to_le16(w); -} - -unsigned char _inb(unsigned long port) -{ - if (port >= 0x300 && port < 0x320) - return _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread(0, port, &b, sizeof(b), 1, 0); - return b; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned char b; - pcc_ioread(1, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - - return *(volatile unsigned char *)PORT2ADDR(port); -} - -unsigned short _inw(unsigned long port) -{ - if (port >= 0x300 && port < 0x320) - return _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread(0, port, &w, sizeof(w), 1, 0); - return w; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned short w; - pcc_ioread(1, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - return *(volatile unsigned short *)PORT2ADDR(port); -} - -unsigned long _inl(unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned long l; - pcc_ioread(0, port, &l, sizeof(l), 1, 0); - return l; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned short l; - pcc_ioread(1, port, &l, sizeof(l), 1, 0); - return l; - } else -#endif - return *(volatile unsigned long *)PORT2ADDR(port); -} - -unsigned char _inb_p(unsigned long port) -{ - unsigned char v = _inb(port); - delay(); - return (v); -} - -unsigned short _inw_p(unsigned long port) -{ - unsigned short v = _inw(port); - delay(); - return (v); -} - -unsigned long _inl_p(unsigned long port) -{ - unsigned long v = _inl(port); - delay(); - return (v); -} - -void _outb(unsigned char b, unsigned long port) -{ - if (port >= 0x300 && port < 0x320) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &b, sizeof(b), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; -} - -void _outw(unsigned short w, unsigned long port) -{ - if (port >= 0x300 && port < 0x320) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &w, sizeof(w), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; -} - -void _outl(unsigned long l, unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &l, sizeof(l), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &l, sizeof(l), 1, 0); - } else -#endif - *(volatile unsigned long *)PORT2ADDR(port) = l; -} - -void _outb_p(unsigned char b, unsigned long port) -{ - _outb(b, port); - delay(); -} - -void _outw_p(unsigned short w, unsigned long port) -{ - _outw(w, port); - delay(); -} - -void _outl_p(unsigned long l, unsigned long port) -{ - _outl(l, port); - delay(); -} - -void _insb(unsigned int port, void *addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= 0x300 && port < 0x320){ - portp = PORT2ADDR_NE(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread(0, port, (void *)addr, sizeof(unsigned char), - count, 1); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_ioread(1, port, (void *)addr, sizeof(unsigned char), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -} - -void _insw(unsigned int port, void *addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= 0x300 && port < 0x320) { - portp = PORT2ADDR_NE(port); - while (count--) - *buf++ = _ne_inw(portp); -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread(0, port, (void *)addr, sizeof(unsigned short), - count, 1); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_ioread(1, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; - } -} - -void _insl(unsigned int port, void *addr, unsigned long count) -{ - unsigned long *buf = addr; - unsigned long *portp; - - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned long *)portp; -} - -void _outsb(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned char *buf = addr; - unsigned char *portp; - - if (port >= 0x300 && port < 0x320) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outb(*buf++, portp); -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, (void *)addr, sizeof(unsigned char), - count, 1); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, (void *)addr, sizeof(unsigned char), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; - } -} - -void _outsw(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned short *buf = addr; - unsigned short *portp; - - if (port >= 0x300 && port < 0x320) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outw(*buf++, portp); -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, (void *)addr, sizeof(unsigned short), - count, 1); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; - } -} - -void _outsl(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned long *buf = addr; - unsigned char *portp; - - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned long *)portp = *buf++; -} diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/kernel/io_mappi2.c deleted file mode 100644 index ecc6aa88f9ac..000000000000 --- a/arch/m32r/kernel/io_mappi2.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * linux/arch/m32r/kernel/io_mappi2.c - * - * Typical I/O routines for Mappi2 board. - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa - */ - -#include <asm/m32r.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) -#include <linux/types.h> - -#define M32R_PCC_IOMAP_SIZE 0x1000 - -#define M32R_PCC_IOSTART0 0x1000 -#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) - -extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ - -#define PORT2ADDR(port) _port2addr(port) -#define PORT2ADDR_NE(port) _port2addr_ne(port) -#define PORT2ADDR_USB(port) _port2addr_usb(port) - -static inline void *_port2addr(unsigned long port) -{ - return (void *)(port | NONCACHE_OFFSET); -} - -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) -static inline void *__port2addr_ata(unsigned long port) -{ - static int dummy_reg; - - switch (port) { - case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); - case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); - case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); - case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); - case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); - case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); - case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); - case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); - case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); - default: return (void *)&dummy_reg; - } -} -#endif - -#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) -#define LAN_IOEND (0x320 | NONCACHE_OFFSET) -#ifdef CONFIG_CHIP_OPSP -static inline void *_port2addr_ne(unsigned long port) -{ - return (void *)(port + 0x10000000); -} -#else -static inline void *_port2addr_ne(unsigned long port) -{ - return (void *)(port + 0x04000000); -} -#endif -static inline void *_port2addr_usb(unsigned long port) -{ - return (void *)(port + NONCACHE_OFFSET + 0x14000000); -} -static inline void delay(void) -{ - __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); -} - -/* - * NIC I/O function - */ - -static inline unsigned char _ne_inb(void *portp) -{ - return (unsigned char) *(volatile unsigned char *)portp; -} - -static inline unsigned short _ne_inw(void *portp) -{ - return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); -} - -static inline void _ne_insb(void *portp, void * addr, unsigned long count) -{ - unsigned char *buf = addr; - - while (count--) - *buf++ = *(volatile unsigned char *)portp; -} - -static inline void _ne_outb(unsigned char b, void *portp) -{ - *(volatile unsigned char *)portp = (unsigned char)b; -} - -static inline void _ne_outw(unsigned short w, void *portp) -{ - *(volatile unsigned short *)portp = cpu_to_le16(w); -} - -unsigned char _inb(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inb(PORT2ADDR_NE(port)); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - - return *(volatile unsigned char *)PORT2ADDR(port); -} - -unsigned short _inw(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inw(PORT2ADDR_NE(port)); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } -#endif -#if defined(CONFIG_USB) - else if (port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); -#endif - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - return *(volatile unsigned short *)PORT2ADDR(port); -} - -unsigned long _inl(unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned long l; - pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); - return l; - } else -#endif - return *(volatile unsigned long *)PORT2ADDR(port); -} - -unsigned char _inb_p(unsigned long port) -{ - unsigned char v = _inb(port); - delay(); - return (v); -} - -unsigned short _inw_p(unsigned long port) -{ - unsigned short v = _inw(port); - delay(); - return (v); -} - -unsigned long _inl_p(unsigned long port) -{ - unsigned long v = _inl(port); - delay(); - return (v); -} - -void _outb(unsigned char b, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; -} - -void _outw(unsigned short w, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if (port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; -} - -void _outl(unsigned long l, unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); - } else -#endif - *(volatile unsigned long *)PORT2ADDR(port) = l; -} - -void _outb_p(unsigned char b, unsigned long port) -{ - _outb(b, port); - delay(); -} - -void _outw_p(unsigned short w, unsigned long port) -{ - _outw(w, port); - delay(); -} - -void _outl_p(unsigned long l, unsigned long port) -{ - _outl(l, port); - delay(); -} - -void _insb(unsigned int port, void * addr, unsigned long count) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_insb(PORT2ADDR_NE(port), addr, count); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - unsigned char *buf = addr; - unsigned char *portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); - } -#endif - else { - unsigned char *buf = addr; - unsigned char *portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -} - -void _insw(unsigned int port, void * addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; - } -} - -void _insl(unsigned int port, void * addr, unsigned long count) -{ - unsigned long *buf = addr; - unsigned long *portp; - - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned long *)portp; -} - -void _outsb(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned char *buf = addr; - unsigned char *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outb(*buf++, portp); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; - } -} - -void _outsw(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; - } -} - -void _outsl(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned long *buf = addr; - unsigned char *portp; - - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned long *)portp = *buf++; -} diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c deleted file mode 100644 index a13b5f6b07e9..000000000000 --- a/arch/m32r/kernel/io_mappi3.c +++ /dev/null @@ -1,405 +0,0 @@ -/* - * linux/arch/m32r/kernel/io_mappi3.c - * - * Typical I/O routines for Mappi3 board. - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa - */ - -#include <asm/m32r.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) -#include <linux/types.h> - -#define M32R_PCC_IOMAP_SIZE 0x1000 - -#define M32R_PCC_IOSTART0 0x1000 -#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) - -extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ - -#define PORT2ADDR(port) _port2addr(port) -#define PORT2ADDR_NE(port) _port2addr_ne(port) -#define PORT2ADDR_USB(port) _port2addr_usb(port) - -static inline void *_port2addr(unsigned long port) -{ - return (void *)(port | NONCACHE_OFFSET); -} - -#if defined(CONFIG_IDE) -static inline void *__port2addr_ata(unsigned long port) -{ - static int dummy_reg; - - switch (port) { - /* IDE0 CF */ - case 0x1f0: return (void *)(0x14002000 | NONCACHE_OFFSET); - case 0x1f1: return (void *)(0x14012800 | NONCACHE_OFFSET); - case 0x1f2: return (void *)(0x14012002 | NONCACHE_OFFSET); - case 0x1f3: return (void *)(0x14012802 | NONCACHE_OFFSET); - case 0x1f4: return (void *)(0x14012004 | NONCACHE_OFFSET); - case 0x1f5: return (void *)(0x14012804 | NONCACHE_OFFSET); - case 0x1f6: return (void *)(0x14012006 | NONCACHE_OFFSET); - case 0x1f7: return (void *)(0x14012806 | NONCACHE_OFFSET); - case 0x3f6: return (void *)(0x1401200e | NONCACHE_OFFSET); - /* IDE1 IDE */ - case 0x170: /* Data 16bit */ - return (void *)(0x14810000 | NONCACHE_OFFSET); - case 0x171: /* Features / Error */ - return (void *)(0x14810002 | NONCACHE_OFFSET); - case 0x172: /* Sector count */ - return (void *)(0x14810004 | NONCACHE_OFFSET); - case 0x173: /* Sector number */ - return (void *)(0x14810006 | NONCACHE_OFFSET); - case 0x174: /* Cylinder low */ - return (void *)(0x14810008 | NONCACHE_OFFSET); - case 0x175: /* Cylinder high */ - return (void *)(0x1481000a | NONCACHE_OFFSET); - case 0x176: /* Device head */ - return (void *)(0x1481000c | NONCACHE_OFFSET); - case 0x177: /* Command */ - return (void *)(0x1481000e | NONCACHE_OFFSET); - case 0x376: /* Device control / Alt status */ - return (void *)(0x1480800c | NONCACHE_OFFSET); - - default: return (void *)&dummy_reg; - } -} -#endif - -#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) -#define LAN_IOEND (0x320 | NONCACHE_OFFSET) -static inline void *_port2addr_ne(unsigned long port) -{ - return (void *)(port + 0x10000000); -} - -static inline void *_port2addr_usb(unsigned long port) -{ - return (void *)(port + NONCACHE_OFFSET + 0x12000000); -} -static inline void delay(void) -{ - __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); -} - -/* - * NIC I/O function - */ - -static inline unsigned char _ne_inb(void *portp) -{ - return (unsigned char) *(volatile unsigned char *)portp; -} - -static inline unsigned short _ne_inw(void *portp) -{ - return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); -} - -static inline void _ne_insb(void *portp, void * addr, unsigned long count) -{ - unsigned char *buf = addr; - - while (count--) - *buf++ = *(volatile unsigned char *)portp; -} - -static inline void _ne_outb(unsigned char b, void *portp) -{ - *(volatile unsigned char *)portp = (unsigned char)b; -} - -static inline void _ne_outw(unsigned short w, void *portp) -{ - *(volatile unsigned short *)portp = cpu_to_le16(w); -} - -unsigned char _inb(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inb(PORT2ADDR_NE(port)); -#if defined(CONFIG_IDE) - else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || - ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ - return *(volatile unsigned char *)__port2addr_ata(port); - } -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - return *(volatile unsigned char *)PORT2ADDR(port); -} - -unsigned short _inw(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inw(PORT2ADDR_NE(port)); -#if defined(CONFIG_IDE) - else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || - ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ - return *(volatile unsigned short *)__port2addr_ata(port); - } -#endif -#if defined(CONFIG_USB) - else if (port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); -#endif - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - return *(volatile unsigned short *)PORT2ADDR(port); -} - -unsigned long _inl(unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned long l; - pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); - return l; - } else -#endif - return *(volatile unsigned long *)PORT2ADDR(port); -} - -unsigned char _inb_p(unsigned long port) -{ - unsigned char v = _inb(port); - delay(); - return (v); -} - -unsigned short _inw_p(unsigned long port) -{ - unsigned short v = _inw(port); - delay(); - return (v); -} - -unsigned long _inl_p(unsigned long port) -{ - unsigned long v = _inl(port); - delay(); - return (v); -} - -void _outb(unsigned char b, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) - if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || - ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; -} - -void _outw(unsigned short w, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) - if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || - ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if (port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; -} - -void _outl(unsigned long l, unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); - } else -#endif - *(volatile unsigned long *)PORT2ADDR(port) = l; -} - -void _outb_p(unsigned char b, unsigned long port) -{ - _outb(b, port); - delay(); -} - -void _outw_p(unsigned short w, unsigned long port) -{ - _outw(w, port); - delay(); -} - -void _outl_p(unsigned long l, unsigned long port) -{ - _outl(l, port); - delay(); -} - -void _insb(unsigned int port, void * addr, unsigned long count) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_insb(PORT2ADDR_NE(port), addr, count); -#if defined(CONFIG_IDE) - else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || - ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ - unsigned char *buf = addr; - unsigned char *portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); - } -#endif - else { - unsigned char *buf = addr; - unsigned char *portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -} - -void _insw(unsigned int port, void * addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif -#if defined(CONFIG_IDE) - } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || - ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ - portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; - } -} - -void _insl(unsigned int port, void * addr, unsigned long count) -{ - unsigned long *buf = addr; - unsigned long *portp; - - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned long *)portp; -} - -void _outsb(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned char *buf = addr; - unsigned char *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outb(*buf++, portp); -#if defined(CONFIG_IDE) - } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || - ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; - } -} - -void _outsw(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#if defined(CONFIG_IDE) - } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || - ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; - } -} - -void _outsl(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned long *buf = addr; - unsigned char *portp; - - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned long *)portp = *buf++; -} diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/kernel/io_oaks32r.c deleted file mode 100644 index 068bf47060f8..000000000000 --- a/arch/m32r/kernel/io_oaks32r.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * linux/arch/m32r/kernel/io_oaks32r.c - * - * Typical I/O routines for OAKS32R board. - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa - */ - -#include <asm/m32r.h> -#include <asm/page.h> -#include <asm/io.h> - -#define PORT2ADDR(port) _port2addr(port) - -static inline void *_port2addr(unsigned long port) -{ - return (void *)(port | NONCACHE_OFFSET); -} - -static inline void *_port2addr_ne(unsigned long port) -{ - return (void *)((port<<1) + NONCACHE_OFFSET + 0x02000000); -} - -static inline void delay(void) -{ - __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); -} - -/* - * NIC I/O function - */ - -#define PORT2ADDR_NE(port) _port2addr_ne(port) - -static inline unsigned char _ne_inb(void *portp) -{ - return *(volatile unsigned char *)(portp+1); -} - -static inline unsigned short _ne_inw(void *portp) -{ - unsigned short tmp; - - tmp = *(unsigned short *)(portp) & 0xff; - tmp |= *(unsigned short *)(portp+2) << 8; - return tmp; -} - -static inline void _ne_insb(void *portp, void *addr, unsigned long count) -{ - unsigned char *buf = addr; - while (count--) - *buf++ = *(volatile unsigned char *)(portp+1); -} - -static inline void _ne_outb(unsigned char b, void *portp) -{ - *(volatile unsigned char *)(portp+1) = b; -} - -static inline void _ne_outw(unsigned short w, void *portp) -{ - *(volatile unsigned short *)portp = (w >> 8); - *(volatile unsigned short *)(portp+2) = (w & 0xff); -} - -unsigned char _inb(unsigned long port) -{ - if (port >= 0x300 && port < 0x320) - return _ne_inb(PORT2ADDR_NE(port)); - - return *(volatile unsigned char *)PORT2ADDR(port); -} - -unsigned short _inw(unsigned long port) -{ - if (port >= 0x300 && port < 0x320) - return _ne_inw(PORT2ADDR_NE(port)); - - return *(volatile unsigned short *)PORT2ADDR(port); -} - -unsigned long _inl(unsigned long port) -{ - return *(volatile unsigned long *)PORT2ADDR(port); -} - -unsigned char _inb_p(unsigned long port) -{ - unsigned char v = _inb(port); - delay(); - return (v); -} - -unsigned short _inw_p(unsigned long port) -{ - unsigned short v = _inw(port); - delay(); - return (v); -} - -unsigned long _inl_p(unsigned long port) -{ - unsigned long v = _inl(port); - delay(); - return (v); -} - -void _outb(unsigned char b, unsigned long port) -{ - if (port >= 0x300 && port < 0x320) - _ne_outb(b, PORT2ADDR_NE(port)); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; -} - -void _outw(unsigned short w, unsigned long port) -{ - if (port >= 0x300 && port < 0x320) - _ne_outw(w, PORT2ADDR_NE(port)); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; -} - -void _outl(unsigned long l, unsigned long port) -{ - *(volatile unsigned long *)PORT2ADDR(port) = l; -} - -void _outb_p(unsigned char b, unsigned long port) -{ - _outb(b, port); - delay(); -} - -void _outw_p(unsigned short w, unsigned long port) -{ - _outw(w, port); - delay(); -} - -void _outl_p(unsigned long l, unsigned long port) -{ - _outl(l, port); - delay(); -} - -void _insb(unsigned int port, void *addr, unsigned long count) -{ - if (port >= 0x300 && port < 0x320) - _ne_insb(PORT2ADDR_NE(port), addr, count); - else { - unsigned char *buf = addr; - unsigned char *portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -} - -void _insw(unsigned int port, void *addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= 0x300 && port < 0x320) { - portp = PORT2ADDR_NE(port); - while (count--) - *buf++ = _ne_inw(portp); - } else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; - } -} - -void _insl(unsigned int port, void *addr, unsigned long count) -{ - unsigned long *buf = addr; - unsigned long *portp; - - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned long *)portp; -} - -void _outsb(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned char *buf = addr; - unsigned char *portp; - - if (port >= 0x300 && port < 0x320) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outb(*buf++, portp); - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; - } -} - -void _outsw(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned short *buf = addr; - unsigned short *portp; - - if (port >= 0x300 && port < 0x320) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outw(*buf++, portp); - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; - } -} - -void _outsl(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned long *buf = addr; - unsigned char *portp; - - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned long *)portp = *buf++; -} diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/kernel/io_opsput.c deleted file mode 100644 index 3cbb1f717e50..000000000000 --- a/arch/m32r/kernel/io_opsput.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * linux/arch/m32r/kernel/io_opsput.c - * - * Typical I/O routines for OPSPUT board. - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - */ - -#include <asm/m32r.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) -#include <linux/types.h> - -#define M32R_PCC_IOMAP_SIZE 0x1000 - -#define M32R_PCC_IOSTART0 0x1000 -#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) - -extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ - -#define PORT2ADDR(port) _port2addr(port) -#define PORT2ADDR_USB(port) _port2addr_usb(port) - -static inline void *_port2addr(unsigned long port) -{ - return (void *)(port | NONCACHE_OFFSET); -} - -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) -static inline void *__port2addr_ata(unsigned long port) -{ - static int dummy_reg; - - switch (port) { - case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); - case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); - case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); - case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); - case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); - case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); - case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); - case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); - case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); - default: return (void *)&dummy_reg; - } -} -#endif - -/* - * OPSPUT-LAN is located in the extended bus space - * from 0x10000000 to 0x13ffffff on physical address. - * The base address of LAN controller(LAN91C111) is 0x300. - */ -#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) -#define LAN_IOEND (0x320 | NONCACHE_OFFSET) -static inline void *_port2addr_ne(unsigned long port) -{ - return (void *)(port + 0x10000000); -} -static inline void *_port2addr_usb(unsigned long port) -{ - return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000); -} - -static inline void delay(void) -{ - __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); -} - -/* - * NIC I/O function - */ - -#define PORT2ADDR_NE(port) _port2addr_ne(port) - -static inline unsigned char _ne_inb(void *portp) -{ - return *(volatile unsigned char *)portp; -} - -static inline unsigned short _ne_inw(void *portp) -{ - return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); -} - -static inline void _ne_insb(void *portp, void *addr, unsigned long count) -{ - unsigned char *buf = (unsigned char *)addr; - - while (count--) - *buf++ = _ne_inb(portp); -} - -static inline void _ne_outb(unsigned char b, void *portp) -{ - *(volatile unsigned char *)portp = b; -} - -static inline void _ne_outw(unsigned short w, void *portp) -{ - *(volatile unsigned short *)portp = cpu_to_le16(w); -} - -unsigned char _inb(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inb(PORT2ADDR_NE(port)); - -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - - return *(volatile unsigned char *)PORT2ADDR(port); -} - -unsigned short _inw(unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - return _ne_inw(PORT2ADDR_NE(port)); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } -#endif -#if defined(CONFIG_USB) - else if(port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - return *(volatile unsigned short *)PORT2ADDR(port); -} - -unsigned long _inl(unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned long l; - pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); - return l; - } else -#endif - return *(volatile unsigned long *)PORT2ADDR(port); -} - -unsigned char _inb_p(unsigned long port) -{ - unsigned char v = _inb(port); - delay(); - return (v); -} - -unsigned short _inw_p(unsigned long port) -{ - unsigned short v = _inw(port); - delay(); - return (v); -} - -unsigned long _inl_p(unsigned long port) -{ - unsigned long v = _inl(port); - delay(); - return (v); -} - -void _outb(unsigned char b, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; -} - -void _outw(unsigned short w, unsigned long port) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; -} - -void _outl(unsigned long l, unsigned long port) -{ -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); - } else -#endif - *(volatile unsigned long *)PORT2ADDR(port) = l; -} - -void _outb_p(unsigned char b, unsigned long port) -{ - _outb(b, port); - delay(); -} - -void _outw_p(unsigned short w, unsigned long port) -{ - _outw(w, port); - delay(); -} - -void _outl_p(unsigned long l, unsigned long port) -{ - _outl(l, port); - delay(); -} - -void _insb(unsigned int port, void *addr, unsigned long count) -{ - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_insb(PORT2ADDR_NE(port), addr, count); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - unsigned char *buf = addr; - unsigned char *portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); - } -#endif - else { - unsigned char *buf = addr; - unsigned char *portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -} - -void _insw(unsigned int port, void *addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - /* - * This portion is only used by smc91111.c to read data - * from the DATA_REG. Do not swap the data. - */ - portp = PORT2ADDR_NE(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; - } -} - -void _insl(unsigned int port, void *addr, unsigned long count) -{ - unsigned long *buf = addr; - unsigned long *portp; - - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned long *)portp; -} - -void _outsb(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned char *buf = addr; - unsigned char *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - portp = PORT2ADDR_NE(port); - while (count--) - _ne_outb(*buf++, portp); -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; - } -} - -void _outsw(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned short *buf = addr; - unsigned short *portp; - - if (port >= LAN_IOSTART && port < LAN_IOEND) { - /* - * This portion is only used by smc91111.c to write data - * into the DATA_REG. Do not swap the data. - */ - portp = PORT2ADDR_NE(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - portp = __port2addr_ata(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), - count, 1); -#endif - } else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; - } -} - -void _outsl(unsigned int port, const void *addr, unsigned long count) -{ - const unsigned long *buf = addr; - unsigned char *portp; - - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned long *)portp = *buf++; -} diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/kernel/io_usrv.c deleted file mode 100644 index a8c0e2eceb4d..000000000000 --- a/arch/m32r/kernel/io_usrv.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * linux/arch/m32r/kernel/io_usrv.c - * - * Typical I/O routines for uServer board. - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - * - */ - -#include <asm/m32r.h> -#include <asm/page.h> -#include <asm/io.h> - -#include <linux/types.h> -#include "../drivers/m32r_cfc.h" - -extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); -extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#define CFC_IOSTART CFC_IOPORT_BASE -#define CFC_IOEND (CFC_IOSTART + (M32R_PCC_MAPSIZE * M32R_MAX_PCC) - 1) - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) -#define UART0_REGSTART 0x04c20000 -#define UART1_REGSTART 0x04c20100 -#define UART_IOMAP_SIZE 8 -#define UART0_IOSTART 0x3f8 -#define UART0_IOEND (UART0_IOSTART + UART_IOMAP_SIZE - 1) -#define UART1_IOSTART 0x2f8 -#define UART1_IOEND (UART1_IOSTART + UART_IOMAP_SIZE - 1) -#endif /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */ - -#define PORT2ADDR(port) _port2addr(port) - -static inline void *_port2addr(unsigned long port) -{ -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - if (port >= UART0_IOSTART && port <= UART0_IOEND) - port = ((port - UART0_IOSTART) << 1) + UART0_REGSTART; - else if (port >= UART1_IOSTART && port <= UART1_IOEND) - port = ((port - UART1_IOSTART) << 1) + UART1_REGSTART; -#endif /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */ - return (void *)(port | (NONCACHE_OFFSET)); -} - -static inline void delay(void) -{ - __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); -} - -unsigned char _inb(unsigned long port) -{ - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else - return *(volatile unsigned char *)PORT2ADDR(port); -} - -unsigned short _inw(unsigned long port) -{ - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else - return *(volatile unsigned short *)PORT2ADDR(port); -} - -unsigned long _inl(unsigned long port) -{ - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - unsigned long l; - pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); - return l; - } else - return *(volatile unsigned long *)PORT2ADDR(port); -} - -unsigned char _inb_p(unsigned long port) -{ - unsigned char v = _inb(port); - delay(); - return v; -} - -unsigned short _inw_p(unsigned long port) -{ - unsigned short v = _inw(port); - delay(); - return v; -} - -unsigned long _inl_p(unsigned long port) -{ - unsigned long v = _inl(port); - delay(); - return v; -} - -void _outb(unsigned char b, unsigned long port) -{ - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; -} - -void _outw(unsigned short w, unsigned long port) -{ - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; -} - -void _outl(unsigned long l, unsigned long port) -{ - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); - else - *(volatile unsigned long *)PORT2ADDR(port) = l; -} - -void _outb_p(unsigned char b, unsigned long port) -{ - _outb(b, port); - delay(); -} - -void _outw_p(unsigned short w, unsigned long port) -{ - _outw(w, port); - delay(); -} - -void _outl_p(unsigned long l, unsigned long port) -{ - _outl(l, port); - delay(); -} - -void _insb(unsigned int port, void * addr, unsigned long count) -{ - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_ioread_byte(0, port, addr, sizeof(unsigned char), count, 1); - else { - unsigned char *buf = addr; - unsigned char *portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned char *)portp; - } -} - -void _insw(unsigned int port, void * addr, unsigned long count) -{ - unsigned short *buf = addr; - unsigned short *portp; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_ioread_word(0, port, addr, sizeof(unsigned short), count, - 1); - else { - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned short *)portp; - } -} - -void _insl(unsigned int port, void * addr, unsigned long count) -{ - unsigned long *buf = addr; - unsigned long *portp; - - portp = PORT2ADDR(port); - while (count--) - *buf++ = *(volatile unsigned long *)portp; -} - -void _outsb(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned char *buf = addr; - unsigned char *portp; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), - count, 1); - else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned char *)portp = *buf++; - } -} - -void _outsw(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned short *buf = addr; - unsigned short *portp; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_word(0, port, (void *)addr, sizeof(unsigned short), - count, 1); - else { - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned short *)portp = *buf++; - } -} - -void _outsl(unsigned int port, const void * addr, unsigned long count) -{ - const unsigned long *buf = addr; - unsigned char *portp; - - portp = PORT2ADDR(port); - while (count--) - *(volatile unsigned long *)portp = *buf++; -} diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c index 5f02b3144875..62a51429306e 100644 --- a/arch/m32r/kernel/ptrace.c +++ b/arch/m32r/kernel/ptrace.c @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/err.h> #include <linux/smp.h> #include <linux/smp_lock.h> #include <linux/errno.h> @@ -595,7 +596,6 @@ void ptrace_disable(struct task_struct *child) static int do_ptrace(long request, struct task_struct *child, long addr, long data) { - unsigned long tmp; int ret; switch (request) { @@ -604,11 +604,7 @@ do_ptrace(long request, struct task_struct *child, long addr, long data) */ case PTRACE_PEEKTEXT: case PTRACE_PEEKDATA: - ret = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); - if (ret == sizeof(tmp)) - ret = put_user(tmp,(unsigned long __user *) data); - else - ret = -EIO; + ret = generic_ptrace_peekdata(child, addr, data); break; /* @@ -624,15 +620,9 @@ do_ptrace(long request, struct task_struct *child, long addr, long data) */ case PTRACE_POKETEXT: case PTRACE_POKEDATA: - ret = access_process_vm(child, addr, &data, sizeof(data), 1); - if (ret == sizeof(data)) { - ret = 0; - if (request == PTRACE_POKETEXT) { - invalidate_cache(); - } - } else { - ret = -EIO; - } + ret = generic_ptrace_pokedata(child, addr, data); + if (ret == 0 && request == PTRACE_POKETEXT) + invalidate_cache(); break; /* diff --git a/arch/m32r/kernel/setup_m32104ut.c b/arch/m32r/kernel/setup_m32104ut.c deleted file mode 100644 index 1692b321f476..000000000000 --- a/arch/m32r/kernel/setup_m32104ut.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * linux/arch/m32r/kernel/setup_m32104ut.c - * - * Setup routines for M32104UT Board - * - * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa, - * Naoto Sugai, Hayato Fujiwara - */ - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> - -#include <asm/system.h> -#include <asm/m32r.h> -#include <asm/io.h> - -#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) - -icu_data_t icu_data[NR_IRQS]; - -static void disable_m32104ut_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; - outl(data, port); -} - -static void enable_m32104ut_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; - outl(data, port); -} - -static void mask_and_ack_m32104ut(unsigned int irq) -{ - disable_m32104ut_irq(irq); -} - -static void end_m32104ut_irq(unsigned int irq) -{ - enable_m32104ut_irq(irq); -} - -static unsigned int startup_m32104ut_irq(unsigned int irq) -{ - enable_m32104ut_irq(irq); - return (0); -} - -static void shutdown_m32104ut_irq(unsigned int irq) -{ - unsigned long port; - - port = irq2port(irq); - outl(M32R_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type m32104ut_irq_type = -{ - .typename = "M32104UT-IRQ", - .startup = startup_m32104ut_irq, - .shutdown = shutdown_m32104ut_irq, - .enable = enable_m32104ut_irq, - .disable = disable_m32104ut_irq, - .ack = mask_and_ack_m32104ut, - .end = end_m32104ut_irq -}; - -void __init init_IRQ(void) -{ - static int once = 0; - - if (once) - return; - else - once++; - -#if defined(CONFIG_SMC91X) - /* INT#0: LAN controller on M32104UT-LAN (SMC91C111)*/ - irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT0].chip = &m32104ut_irq_type; - irq_desc[M32R_IRQ_INT0].action = 0; - irq_desc[M32R_IRQ_INT0].depth = 1; - icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD11; /* "H" level sense */ - disable_m32104ut_irq(M32R_IRQ_INT0); -#endif /* CONFIG_SMC91X */ - - /* MFT2 : system timer */ - irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_MFT2].chip = &m32104ut_irq_type; - irq_desc[M32R_IRQ_MFT2].action = 0; - irq_desc[M32R_IRQ_MFT2].depth = 1; - icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; - disable_m32104ut_irq(M32R_IRQ_MFT2); - -#ifdef CONFIG_SERIAL_M32R_SIO - /* SIO0_R : uart receive data */ - irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_R].chip = &m32104ut_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = 0; - irq_desc[M32R_IRQ_SIO0_R].depth = 1; - icu_data[M32R_IRQ_SIO0_R].icucr = M32R_ICUCR_IEN; - disable_m32104ut_irq(M32R_IRQ_SIO0_R); - - /* SIO0_S : uart send data */ - irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_S].chip = &m32104ut_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = 0; - irq_desc[M32R_IRQ_SIO0_S].depth = 1; - icu_data[M32R_IRQ_SIO0_S].icucr = M32R_ICUCR_IEN; - disable_m32104ut_irq(M32R_IRQ_SIO0_S); -#endif /* CONFIG_SERIAL_M32R_SIO */ -} - -#if defined(CONFIG_SMC91X) - -#define LAN_IOSTART 0x300 -#define LAN_IOEND 0x320 -static struct resource smc91x_resources[] = { - [0] = { - .start = (LAN_IOSTART), - .end = (LAN_IOEND), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = M32R_IRQ_INT0, - .end = M32R_IRQ_INT0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -static int __init platform_init(void) -{ -#if defined(CONFIG_SMC91X) - platform_device_register(&smc91x_device); -#endif - return 0; -} -arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/kernel/setup_m32700ut.c deleted file mode 100644 index 7efc145c74c2..000000000000 --- a/arch/m32r/kernel/setup_m32700ut.c +++ /dev/null @@ -1,518 +0,0 @@ -/* - * linux/arch/m32r/kernel/setup_m32700ut.c - * - * Setup routines for Renesas M32700UT Board - * - * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - */ - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/system.h> -#include <asm/m32r.h> -#include <asm/io.h> - -/* - * M32700 Interrupt Control Unit (Level 1) - */ -#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) - -icu_data_t icu_data[M32700UT_NUM_CPU_IRQ]; - -static void disable_m32700ut_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; - outl(data, port); -} - -static void enable_m32700ut_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; - outl(data, port); -} - -static void mask_and_ack_m32700ut(unsigned int irq) -{ - disable_m32700ut_irq(irq); -} - -static void end_m32700ut_irq(unsigned int irq) -{ - enable_m32700ut_irq(irq); -} - -static unsigned int startup_m32700ut_irq(unsigned int irq) -{ - enable_m32700ut_irq(irq); - return (0); -} - -static void shutdown_m32700ut_irq(unsigned int irq) -{ - unsigned long port; - - port = irq2port(irq); - outl(M32R_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type m32700ut_irq_type = -{ - .typename = "M32700UT-IRQ", - .startup = startup_m32700ut_irq, - .shutdown = shutdown_m32700ut_irq, - .enable = enable_m32700ut_irq, - .disable = disable_m32700ut_irq, - .ack = mask_and_ack_m32700ut, - .end = end_m32700ut_irq -}; - -/* - * Interrupt Control Unit of PLD on M32700UT (Level 2) - */ -#define irq2pldirq(x) ((x) - M32700UT_PLD_IRQ_BASE) -#define pldirq2port(x) (unsigned long)((int)PLD_ICUCR1 + \ - (((x) - 1) * sizeof(unsigned short))) - -typedef struct { - unsigned short icucr; /* ICU Control Register */ -} pld_icu_data_t; - -static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ]; - -static void disable_m32700ut_pld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); -// disable_m32700ut_irq(M32R_IRQ_INT1); - port = pldirq2port(pldirq); - data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; - outw(data, port); -} - -static void enable_m32700ut_pld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); -// enable_m32700ut_irq(M32R_IRQ_INT1); - port = pldirq2port(pldirq); - data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; - outw(data, port); -} - -static void mask_and_ack_m32700ut_pld(unsigned int irq) -{ - disable_m32700ut_pld_irq(irq); -// mask_and_ack_m32700ut(M32R_IRQ_INT1); -} - -static void end_m32700ut_pld_irq(unsigned int irq) -{ - enable_m32700ut_pld_irq(irq); - end_m32700ut_irq(M32R_IRQ_INT1); -} - -static unsigned int startup_m32700ut_pld_irq(unsigned int irq) -{ - enable_m32700ut_pld_irq(irq); - return (0); -} - -static void shutdown_m32700ut_pld_irq(unsigned int irq) -{ - unsigned long port; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); -// shutdown_m32700ut_irq(M32R_IRQ_INT1); - port = pldirq2port(pldirq); - outw(PLD_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type m32700ut_pld_irq_type = -{ - .typename = "M32700UT-PLD-IRQ", - .startup = startup_m32700ut_pld_irq, - .shutdown = shutdown_m32700ut_pld_irq, - .enable = enable_m32700ut_pld_irq, - .disable = disable_m32700ut_pld_irq, - .ack = mask_and_ack_m32700ut_pld, - .end = end_m32700ut_pld_irq -}; - -/* - * Interrupt Control Unit of PLD on M32700UT-LAN (Level 2) - */ -#define irq2lanpldirq(x) ((x) - M32700UT_LAN_PLD_IRQ_BASE) -#define lanpldirq2port(x) (unsigned long)((int)M32700UT_LAN_ICUCR1 + \ - (((x) - 1) * sizeof(unsigned short))) - -static pld_icu_data_t lanpld_icu_data[M32700UT_NUM_LAN_PLD_IRQ]; - -static void disable_m32700ut_lanpld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2lanpldirq(irq); - port = lanpldirq2port(pldirq); - data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; - outw(data, port); -} - -static void enable_m32700ut_lanpld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2lanpldirq(irq); - port = lanpldirq2port(pldirq); - data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; - outw(data, port); -} - -static void mask_and_ack_m32700ut_lanpld(unsigned int irq) -{ - disable_m32700ut_lanpld_irq(irq); -} - -static void end_m32700ut_lanpld_irq(unsigned int irq) -{ - enable_m32700ut_lanpld_irq(irq); - end_m32700ut_irq(M32R_IRQ_INT0); -} - -static unsigned int startup_m32700ut_lanpld_irq(unsigned int irq) -{ - enable_m32700ut_lanpld_irq(irq); - return (0); -} - -static void shutdown_m32700ut_lanpld_irq(unsigned int irq) -{ - unsigned long port; - unsigned int pldirq; - - pldirq = irq2lanpldirq(irq); - port = lanpldirq2port(pldirq); - outw(PLD_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type m32700ut_lanpld_irq_type = -{ - .typename = "M32700UT-PLD-LAN-IRQ", - .startup = startup_m32700ut_lanpld_irq, - .shutdown = shutdown_m32700ut_lanpld_irq, - .enable = enable_m32700ut_lanpld_irq, - .disable = disable_m32700ut_lanpld_irq, - .ack = mask_and_ack_m32700ut_lanpld, - .end = end_m32700ut_lanpld_irq -}; - -/* - * Interrupt Control Unit of PLD on M32700UT-LCD (Level 2) - */ -#define irq2lcdpldirq(x) ((x) - M32700UT_LCD_PLD_IRQ_BASE) -#define lcdpldirq2port(x) (unsigned long)((int)M32700UT_LCD_ICUCR1 + \ - (((x) - 1) * sizeof(unsigned short))) - -static pld_icu_data_t lcdpld_icu_data[M32700UT_NUM_LCD_PLD_IRQ]; - -static void disable_m32700ut_lcdpld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2lcdpldirq(irq); - port = lcdpldirq2port(pldirq); - data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; - outw(data, port); -} - -static void enable_m32700ut_lcdpld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2lcdpldirq(irq); - port = lcdpldirq2port(pldirq); - data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; - outw(data, port); -} - -static void mask_and_ack_m32700ut_lcdpld(unsigned int irq) -{ - disable_m32700ut_lcdpld_irq(irq); -} - -static void end_m32700ut_lcdpld_irq(unsigned int irq) -{ - enable_m32700ut_lcdpld_irq(irq); - end_m32700ut_irq(M32R_IRQ_INT2); -} - -static unsigned int startup_m32700ut_lcdpld_irq(unsigned int irq) -{ - enable_m32700ut_lcdpld_irq(irq); - return (0); -} - -static void shutdown_m32700ut_lcdpld_irq(unsigned int irq) -{ - unsigned long port; - unsigned int pldirq; - - pldirq = irq2lcdpldirq(irq); - port = lcdpldirq2port(pldirq); - outw(PLD_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type m32700ut_lcdpld_irq_type = -{ - .typename = "M32700UT-PLD-LCD-IRQ", - .startup = startup_m32700ut_lcdpld_irq, - .shutdown = shutdown_m32700ut_lcdpld_irq, - .enable = enable_m32700ut_lcdpld_irq, - .disable = disable_m32700ut_lcdpld_irq, - .ack = mask_and_ack_m32700ut_lcdpld, - .end = end_m32700ut_lcdpld_irq -}; - -void __init init_IRQ(void) -{ -#if defined(CONFIG_SMC91X) - /* INT#0: LAN controller on M32700UT-LAN (SMC91C111)*/ - irq_desc[M32700UT_LAN_IRQ_LAN].status = IRQ_DISABLED; - irq_desc[M32700UT_LAN_IRQ_LAN].chip = &m32700ut_lanpld_irq_type; - irq_desc[M32700UT_LAN_IRQ_LAN].action = 0; - irq_desc[M32700UT_LAN_IRQ_LAN].depth = 1; /* disable nested irq */ - lanpld_icu_data[irq2lanpldirq(M32700UT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* "H" edge sense */ - disable_m32700ut_lanpld_irq(M32700UT_LAN_IRQ_LAN); -#endif /* CONFIG_SMC91X */ - - /* MFT2 : system timer */ - irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_MFT2].chip = &m32700ut_irq_type; - irq_desc[M32R_IRQ_MFT2].action = 0; - irq_desc[M32R_IRQ_MFT2].depth = 1; - icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; - disable_m32700ut_irq(M32R_IRQ_MFT2); - - /* SIO0 : receive */ - irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_R].chip = &m32700ut_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = 0; - irq_desc[M32R_IRQ_SIO0_R].depth = 1; - icu_data[M32R_IRQ_SIO0_R].icucr = 0; - disable_m32700ut_irq(M32R_IRQ_SIO0_R); - - /* SIO0 : send */ - irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_S].chip = &m32700ut_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = 0; - irq_desc[M32R_IRQ_SIO0_S].depth = 1; - icu_data[M32R_IRQ_SIO0_S].icucr = 0; - disable_m32700ut_irq(M32R_IRQ_SIO0_S); - - /* SIO1 : receive */ - irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_R].chip = &m32700ut_irq_type; - irq_desc[M32R_IRQ_SIO1_R].action = 0; - irq_desc[M32R_IRQ_SIO1_R].depth = 1; - icu_data[M32R_IRQ_SIO1_R].icucr = 0; - disable_m32700ut_irq(M32R_IRQ_SIO1_R); - - /* SIO1 : send */ - irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_S].chip = &m32700ut_irq_type; - irq_desc[M32R_IRQ_SIO1_S].action = 0; - irq_desc[M32R_IRQ_SIO1_S].depth = 1; - icu_data[M32R_IRQ_SIO1_S].icucr = 0; - disable_m32700ut_irq(M32R_IRQ_SIO1_S); - - /* DMA1 : */ - irq_desc[M32R_IRQ_DMA1].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_DMA1].chip = &m32700ut_irq_type; - irq_desc[M32R_IRQ_DMA1].action = 0; - irq_desc[M32R_IRQ_DMA1].depth = 1; - icu_data[M32R_IRQ_DMA1].icucr = 0; - disable_m32700ut_irq(M32R_IRQ_DMA1); - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - /* INT#1: SIO0 Receive on PLD */ - irq_desc[PLD_IRQ_SIO0_RCV].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_SIO0_RCV].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_SIO0_RCV].action = 0; - irq_desc[PLD_IRQ_SIO0_RCV].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; - disable_m32700ut_pld_irq(PLD_IRQ_SIO0_RCV); - - /* INT#1: SIO0 Send on PLD */ - irq_desc[PLD_IRQ_SIO0_SND].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_SIO0_SND].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_SIO0_SND].action = 0; - irq_desc[PLD_IRQ_SIO0_SND].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; - disable_m32700ut_pld_irq(PLD_IRQ_SIO0_SND); -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - - /* INT#1: CFC IREQ on PLD */ - irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFIREQ].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_CFIREQ].action = 0; - irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* 'L' level sense */ - disable_m32700ut_pld_irq(PLD_IRQ_CFIREQ); - - /* INT#1: CFC Insert on PLD */ - irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFC_INSERT].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_CFC_INSERT].action = 0; - irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00; /* 'L' edge sense */ - disable_m32700ut_pld_irq(PLD_IRQ_CFC_INSERT); - - /* INT#1: CFC Eject on PLD */ - irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFC_EJECT].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_CFC_EJECT].action = 0; - irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* 'H' edge sense */ - disable_m32700ut_pld_irq(PLD_IRQ_CFC_EJECT); - - /* - * INT0# is used for LAN, DIO - * We enable it here. - */ - icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; - enable_m32700ut_irq(M32R_IRQ_INT0); - - /* - * INT1# is used for UART, MMC, CF Controller in FPGA. - * We enable it here. - */ - icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; - enable_m32700ut_irq(M32R_IRQ_INT1); - -#if defined(CONFIG_USB) - outw(USBCR_OTGS, USBCR); /* USBCR: non-OTG */ - - irq_desc[M32700UT_LCD_IRQ_USB_INT1].status = IRQ_DISABLED; - irq_desc[M32700UT_LCD_IRQ_USB_INT1].chip = &m32700ut_lcdpld_irq_type; - irq_desc[M32700UT_LCD_IRQ_USB_INT1].action = 0; - irq_desc[M32700UT_LCD_IRQ_USB_INT1].depth = 1; - lcdpld_icu_data[irq2lcdpldirq(M32700UT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* "L" level sense */ - disable_m32700ut_lcdpld_irq(M32700UT_LCD_IRQ_USB_INT1); -#endif - /* - * INT2# is used for BAT, USB, AUDIO - * We enable it here. - */ - icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; - enable_m32700ut_irq(M32R_IRQ_INT2); - -#if defined(CONFIG_VIDEO_M32R_AR) - /* - * INT3# is used for AR - */ - irq_desc[M32R_IRQ_INT3].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT3].chip = &m32700ut_irq_type; - irq_desc[M32R_IRQ_INT3].action = 0; - irq_desc[M32R_IRQ_INT3].depth = 1; - icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_m32700ut_irq(M32R_IRQ_INT3); -#endif /* CONFIG_VIDEO_M32R_AR */ -} - -#if defined(CONFIG_SMC91X) - -#define LAN_IOSTART 0x300 -#define LAN_IOEND 0x320 -static struct resource smc91x_resources[] = { - [0] = { - .start = (LAN_IOSTART), - .end = (LAN_IOEND), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = M32700UT_LAN_IRQ_LAN, - .end = M32700UT_LAN_IRQ_LAN, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_FB_S1D13XXX) - -#include <video/s1d13xxxfb.h> -#include <asm/s1d13806.h> - -static struct s1d13xxxfb_pdata s1d13xxxfb_data = { - .initregs = s1d13xxxfb_initregs, - .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), - .platform_init_video = NULL, -#ifdef CONFIG_PM - .platform_suspend_video = NULL, - .platform_resume_video = NULL, -#endif -}; - -static struct resource s1d13xxxfb_resources[] = { - [0] = { - .start = 0x10600000UL, - .end = 0x1073FFFFUL, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x10400000UL, - .end = 0x104001FFUL, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device s1d13xxxfb_device = { - .name = S1D_DEVICENAME, - .id = 0, - .dev = { - .platform_data = &s1d13xxxfb_data, - }, - .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), - .resource = s1d13xxxfb_resources, -}; -#endif - -static int __init platform_init(void) -{ -#if defined(CONFIG_SMC91X) - platform_device_register(&smc91x_device); -#endif -#if defined(CONFIG_FB_S1D13XXX) - platform_device_register(&s1d13xxxfb_device); -#endif - return 0; -} -arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/kernel/setup_mappi.c deleted file mode 100644 index 6b2d77da0683..000000000000 --- a/arch/m32r/kernel/setup_mappi.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * linux/arch/m32r/kernel/setup_mappi.c - * - * Setup routines for Renesas MAPPI Board - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto - */ - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/system.h> -#include <asm/m32r.h> -#include <asm/io.h> - -#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) - -icu_data_t icu_data[NR_IRQS]; - -static void disable_mappi_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; - outl(data, port); -} - -static void enable_mappi_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; - outl(data, port); -} - -static void mask_and_ack_mappi(unsigned int irq) -{ - disable_mappi_irq(irq); -} - -static void end_mappi_irq(unsigned int irq) -{ - enable_mappi_irq(irq); -} - -static unsigned int startup_mappi_irq(unsigned int irq) -{ - enable_mappi_irq(irq); - return (0); -} - -static void shutdown_mappi_irq(unsigned int irq) -{ - unsigned long port; - - port = irq2port(irq); - outl(M32R_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type mappi_irq_type = -{ - .typename = "MAPPI-IRQ", - .startup = startup_mappi_irq, - .shutdown = shutdown_mappi_irq, - .enable = enable_mappi_irq, - .disable = disable_mappi_irq, - .ack = mask_and_ack_mappi, - .end = end_mappi_irq -}; - -void __init init_IRQ(void) -{ - static int once = 0; - - if (once) - return; - else - once++; - -#ifdef CONFIG_NE2000 - /* INT0 : LAN controller (RTL8019AS) */ - irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT0].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_INT0].action = NULL; - irq_desc[M32R_IRQ_INT0].depth = 1; - icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_mappi_irq(M32R_IRQ_INT0); -#endif /* CONFIG_M32R_NE2000 */ - - /* MFT2 : system timer */ - irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_MFT2].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_MFT2].action = NULL; - irq_desc[M32R_IRQ_MFT2].depth = 1; - icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; - disable_mappi_irq(M32R_IRQ_MFT2); - -#ifdef CONFIG_SERIAL_M32R_SIO - /* SIO0_R : uart receive data */ - irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_R].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = NULL; - irq_desc[M32R_IRQ_SIO0_R].depth = 1; - icu_data[M32R_IRQ_SIO0_R].icucr = 0; - disable_mappi_irq(M32R_IRQ_SIO0_R); - - /* SIO0_S : uart send data */ - irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_S].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = NULL; - irq_desc[M32R_IRQ_SIO0_S].depth = 1; - icu_data[M32R_IRQ_SIO0_S].icucr = 0; - disable_mappi_irq(M32R_IRQ_SIO0_S); - - /* SIO1_R : uart receive data */ - irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_R].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO1_R].action = NULL; - irq_desc[M32R_IRQ_SIO1_R].depth = 1; - icu_data[M32R_IRQ_SIO1_R].icucr = 0; - disable_mappi_irq(M32R_IRQ_SIO1_R); - - /* SIO1_S : uart send data */ - irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_S].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO1_S].action = NULL; - irq_desc[M32R_IRQ_SIO1_S].depth = 1; - icu_data[M32R_IRQ_SIO1_S].icucr = 0; - disable_mappi_irq(M32R_IRQ_SIO1_S); -#endif /* CONFIG_SERIAL_M32R_SIO */ - -#if defined(CONFIG_M32R_PCC) - /* INT1 : pccard0 interrupt */ - irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT1].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_INT1].action = NULL; - irq_desc[M32R_IRQ_INT1].depth = 1; - icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00; - disable_mappi_irq(M32R_IRQ_INT1); - - /* INT2 : pccard1 interrupt */ - irq_desc[M32R_IRQ_INT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT2].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_INT2].action = NULL; - irq_desc[M32R_IRQ_INT2].depth = 1; - icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00; - disable_mappi_irq(M32R_IRQ_INT2); -#endif /* CONFIG_M32RPCC */ -} - -#if defined(CONFIG_FB_S1D13XXX) - -#include <video/s1d13xxxfb.h> -#include <asm/s1d13806.h> - -static struct s1d13xxxfb_pdata s1d13xxxfb_data = { - .initregs = s1d13xxxfb_initregs, - .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), - .platform_init_video = NULL, -#ifdef CONFIG_PM - .platform_suspend_video = NULL, - .platform_resume_video = NULL, -#endif -}; - -static struct resource s1d13xxxfb_resources[] = { - [0] = { - .start = 0x10200000UL, - .end = 0x1033FFFFUL, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x10000000UL, - .end = 0x100001FFUL, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device s1d13xxxfb_device = { - .name = S1D_DEVICENAME, - .id = 0, - .dev = { - .platform_data = &s1d13xxxfb_data, - }, - .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), - .resource = s1d13xxxfb_resources, -}; - -static int __init platform_init(void) -{ - platform_device_register(&s1d13xxxfb_device); - return 0; -} -arch_initcall(platform_init); -#endif diff --git a/arch/m32r/kernel/setup_mappi2.c b/arch/m32r/kernel/setup_mappi2.c deleted file mode 100644 index 55abb2102750..000000000000 --- a/arch/m32r/kernel/setup_mappi2.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * linux/arch/m32r/kernel/setup_mappi2.c - * - * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa - */ - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/system.h> -#include <asm/m32r.h> -#include <asm/io.h> - -#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) - -icu_data_t icu_data[NR_IRQS]; - -static void disable_mappi2_irq(unsigned int irq) -{ - unsigned long port, data; - - if ((irq == 0) ||(irq >= NR_IRQS)) { - printk("bad irq 0x%08x\n", irq); - return; - } - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; - outl(data, port); -} - -static void enable_mappi2_irq(unsigned int irq) -{ - unsigned long port, data; - - if ((irq == 0) ||(irq >= NR_IRQS)) { - printk("bad irq 0x%08x\n", irq); - return; - } - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; - outl(data, port); -} - -static void mask_and_ack_mappi2(unsigned int irq) -{ - disable_mappi2_irq(irq); -} - -static void end_mappi2_irq(unsigned int irq) -{ - enable_mappi2_irq(irq); -} - -static unsigned int startup_mappi2_irq(unsigned int irq) -{ - enable_mappi2_irq(irq); - return (0); -} - -static void shutdown_mappi2_irq(unsigned int irq) -{ - unsigned long port; - - port = irq2port(irq); - outl(M32R_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type mappi2_irq_type = -{ - .typename = "MAPPI2-IRQ", - .startup = startup_mappi2_irq, - .shutdown = shutdown_mappi2_irq, - .enable = enable_mappi2_irq, - .disable = disable_mappi2_irq, - .ack = mask_and_ack_mappi2, - .end = end_mappi2_irq -}; - -void __init init_IRQ(void) -{ -#if defined(CONFIG_SMC91X) - /* INT0 : LAN controller (SMC91111) */ - irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT0].chip = &mappi2_irq_type; - irq_desc[M32R_IRQ_INT0].action = 0; - irq_desc[M32R_IRQ_INT0].depth = 1; - icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_mappi2_irq(M32R_IRQ_INT0); -#endif /* CONFIG_SMC91X */ - - /* MFT2 : system timer */ - irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_MFT2].chip = &mappi2_irq_type; - irq_desc[M32R_IRQ_MFT2].action = 0; - irq_desc[M32R_IRQ_MFT2].depth = 1; - icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; - disable_mappi2_irq(M32R_IRQ_MFT2); - -#ifdef CONFIG_SERIAL_M32R_SIO - /* SIO0_R : uart receive data */ - irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_R].chip = &mappi2_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = 0; - irq_desc[M32R_IRQ_SIO0_R].depth = 1; - icu_data[M32R_IRQ_SIO0_R].icucr = 0; - disable_mappi2_irq(M32R_IRQ_SIO0_R); - - /* SIO0_S : uart send data */ - irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_S].chip = &mappi2_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = 0; - irq_desc[M32R_IRQ_SIO0_S].depth = 1; - icu_data[M32R_IRQ_SIO0_S].icucr = 0; - disable_mappi2_irq(M32R_IRQ_SIO0_S); - /* SIO1_R : uart receive data */ - irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_R].chip = &mappi2_irq_type; - irq_desc[M32R_IRQ_SIO1_R].action = 0; - irq_desc[M32R_IRQ_SIO1_R].depth = 1; - icu_data[M32R_IRQ_SIO1_R].icucr = 0; - disable_mappi2_irq(M32R_IRQ_SIO1_R); - - /* SIO1_S : uart send data */ - irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_S].chip = &mappi2_irq_type; - irq_desc[M32R_IRQ_SIO1_S].action = 0; - irq_desc[M32R_IRQ_SIO1_S].depth = 1; - icu_data[M32R_IRQ_SIO1_S].icucr = 0; - disable_mappi2_irq(M32R_IRQ_SIO1_S); -#endif /* CONFIG_M32R_USE_DBG_CONSOLE */ - -#if defined(CONFIG_USB) - /* INT1 : USB Host controller interrupt */ - irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT1].chip = &mappi2_irq_type; - irq_desc[M32R_IRQ_INT1].action = 0; - irq_desc[M32R_IRQ_INT1].depth = 1; - icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; - disable_mappi2_irq(M32R_IRQ_INT1); -#endif /* CONFIG_USB */ - - /* ICUCR40: CFC IREQ */ - irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFIREQ].chip = &mappi2_irq_type; - irq_desc[PLD_IRQ_CFIREQ].action = 0; - irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ - icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; - disable_mappi2_irq(PLD_IRQ_CFIREQ); - -#if defined(CONFIG_M32R_CFC) - /* ICUCR41: CFC Insert */ - irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFC_INSERT].chip = &mappi2_irq_type; - irq_desc[PLD_IRQ_CFC_INSERT].action = 0; - irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ - icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; - disable_mappi2_irq(PLD_IRQ_CFC_INSERT); - - /* ICUCR42: CFC Eject */ - irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFC_EJECT].chip = &mappi2_irq_type; - irq_desc[PLD_IRQ_CFC_EJECT].action = 0; - irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ - icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_mappi2_irq(PLD_IRQ_CFC_EJECT); -#endif /* CONFIG_MAPPI2_CFC */ -} - -#define LAN_IOSTART 0x300 -#define LAN_IOEND 0x320 -static struct resource smc91x_resources[] = { - [0] = { - .start = (LAN_IOSTART), - .end = (LAN_IOEND), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = M32R_IRQ_INT0, - .end = M32R_IRQ_INT0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static int __init platform_init(void) -{ - platform_device_register(&smc91x_device); - return 0; -} -arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/kernel/setup_mappi3.c deleted file mode 100644 index 93dc010c7fc3..000000000000 --- a/arch/m32r/kernel/setup_mappi3.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * linux/arch/m32r/kernel/setup_mappi3.c - * - * Setup routines for Renesas MAPPI-III(M3A-2170) Board - * - * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa - */ - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/system.h> -#include <asm/m32r.h> -#include <asm/io.h> - -#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) - -icu_data_t icu_data[NR_IRQS]; - -static void disable_mappi3_irq(unsigned int irq) -{ - unsigned long port, data; - - if ((irq == 0) ||(irq >= NR_IRQS)) { - printk("bad irq 0x%08x\n", irq); - return; - } - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; - outl(data, port); -} - -static void enable_mappi3_irq(unsigned int irq) -{ - unsigned long port, data; - - if ((irq == 0) ||(irq >= NR_IRQS)) { - printk("bad irq 0x%08x\n", irq); - return; - } - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; - outl(data, port); -} - -static void mask_and_ack_mappi3(unsigned int irq) -{ - disable_mappi3_irq(irq); -} - -static void end_mappi3_irq(unsigned int irq) -{ - enable_mappi3_irq(irq); -} - -static unsigned int startup_mappi3_irq(unsigned int irq) -{ - enable_mappi3_irq(irq); - return (0); -} - -static void shutdown_mappi3_irq(unsigned int irq) -{ - unsigned long port; - - port = irq2port(irq); - outl(M32R_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type mappi3_irq_type = -{ - .typename = "MAPPI3-IRQ", - .startup = startup_mappi3_irq, - .shutdown = shutdown_mappi3_irq, - .enable = enable_mappi3_irq, - .disable = disable_mappi3_irq, - .ack = mask_and_ack_mappi3, - .end = end_mappi3_irq -}; - -void __init init_IRQ(void) -{ -#if defined(CONFIG_SMC91X) - /* INT0 : LAN controller (SMC91111) */ - irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT0].chip = &mappi3_irq_type; - irq_desc[M32R_IRQ_INT0].action = 0; - irq_desc[M32R_IRQ_INT0].depth = 1; - icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_mappi3_irq(M32R_IRQ_INT0); -#endif /* CONFIG_SMC91X */ - - /* MFT2 : system timer */ - irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_MFT2].chip = &mappi3_irq_type; - irq_desc[M32R_IRQ_MFT2].action = 0; - irq_desc[M32R_IRQ_MFT2].depth = 1; - icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; - disable_mappi3_irq(M32R_IRQ_MFT2); - -#ifdef CONFIG_SERIAL_M32R_SIO - /* SIO0_R : uart receive data */ - irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_R].chip = &mappi3_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = 0; - irq_desc[M32R_IRQ_SIO0_R].depth = 1; - icu_data[M32R_IRQ_SIO0_R].icucr = 0; - disable_mappi3_irq(M32R_IRQ_SIO0_R); - - /* SIO0_S : uart send data */ - irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_S].chip = &mappi3_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = 0; - irq_desc[M32R_IRQ_SIO0_S].depth = 1; - icu_data[M32R_IRQ_SIO0_S].icucr = 0; - disable_mappi3_irq(M32R_IRQ_SIO0_S); - /* SIO1_R : uart receive data */ - irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_R].chip = &mappi3_irq_type; - irq_desc[M32R_IRQ_SIO1_R].action = 0; - irq_desc[M32R_IRQ_SIO1_R].depth = 1; - icu_data[M32R_IRQ_SIO1_R].icucr = 0; - disable_mappi3_irq(M32R_IRQ_SIO1_R); - - /* SIO1_S : uart send data */ - irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_S].chip = &mappi3_irq_type; - irq_desc[M32R_IRQ_SIO1_S].action = 0; - irq_desc[M32R_IRQ_SIO1_S].depth = 1; - icu_data[M32R_IRQ_SIO1_S].icucr = 0; - disable_mappi3_irq(M32R_IRQ_SIO1_S); -#endif /* CONFIG_M32R_USE_DBG_CONSOLE */ - -#if defined(CONFIG_USB) - /* INT1 : USB Host controller interrupt */ - irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT1].chip = &mappi3_irq_type; - irq_desc[M32R_IRQ_INT1].action = 0; - irq_desc[M32R_IRQ_INT1].depth = 1; - icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; - disable_mappi3_irq(M32R_IRQ_INT1); -#endif /* CONFIG_USB */ - - /* CFC IREQ */ - irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFIREQ].chip = &mappi3_irq_type; - irq_desc[PLD_IRQ_CFIREQ].action = 0; - irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ - icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; - disable_mappi3_irq(PLD_IRQ_CFIREQ); - -#if defined(CONFIG_M32R_CFC) - /* ICUCR41: CFC Insert & eject */ - irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFC_INSERT].chip = &mappi3_irq_type; - irq_desc[PLD_IRQ_CFC_INSERT].action = 0; - irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ - icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; - disable_mappi3_irq(PLD_IRQ_CFC_INSERT); - -#endif /* CONFIG_M32R_CFC */ - - /* IDE IREQ */ - irq_desc[PLD_IRQ_IDEIREQ].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_IDEIREQ].chip = &mappi3_irq_type; - irq_desc[PLD_IRQ_IDEIREQ].action = 0; - irq_desc[PLD_IRQ_IDEIREQ].depth = 1; /* disable nested irq */ - icu_data[PLD_IRQ_IDEIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_mappi3_irq(PLD_IRQ_IDEIREQ); - -} - -#if defined(CONFIG_SMC91X) - -#define LAN_IOSTART 0x300 -#define LAN_IOEND 0x320 -static struct resource smc91x_resources[] = { - [0] = { - .start = (LAN_IOSTART), - .end = (LAN_IOEND), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = M32R_IRQ_INT0, - .end = M32R_IRQ_INT0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -#endif - -#if defined(CONFIG_FB_S1D13XXX) - -#include <video/s1d13xxxfb.h> -#include <asm/s1d13806.h> - -static struct s1d13xxxfb_pdata s1d13xxxfb_data = { - .initregs = s1d13xxxfb_initregs, - .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), - .platform_init_video = NULL, -#ifdef CONFIG_PM - .platform_suspend_video = NULL, - .platform_resume_video = NULL, -#endif -}; - -static struct resource s1d13xxxfb_resources[] = { - [0] = { - .start = 0x1d600000UL, - .end = 0x1d73FFFFUL, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x1d400000UL, - .end = 0x1d4001FFUL, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device s1d13xxxfb_device = { - .name = S1D_DEVICENAME, - .id = 0, - .dev = { - .platform_data = &s1d13xxxfb_data, - }, - .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), - .resource = s1d13xxxfb_resources, -}; -#endif - -static int __init platform_init(void) -{ -#if defined(CONFIG_SMC91X) - platform_device_register(&smc91x_device); -#endif -#if defined(CONFIG_FB_S1D13XXX) - platform_device_register(&s1d13xxxfb_device); -#endif - return 0; -} -arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_oaks32r.c b/arch/m32r/kernel/setup_oaks32r.c deleted file mode 100644 index cd62598e3cea..000000000000 --- a/arch/m32r/kernel/setup_oaks32r.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * linux/arch/m32r/kernel/setup_oaks32r.c - * - * Setup routines for OAKS32R Board - * - * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Mamoru Sakugawa - */ - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/system.h> -#include <asm/m32r.h> -#include <asm/io.h> - -#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) - -icu_data_t icu_data[NR_IRQS]; - -static void disable_oaks32r_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; - outl(data, port); -} - -static void enable_oaks32r_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; - outl(data, port); -} - -static void mask_and_ack_mappi(unsigned int irq) -{ - disable_oaks32r_irq(irq); -} - -static void end_oaks32r_irq(unsigned int irq) -{ - enable_oaks32r_irq(irq); -} - -static unsigned int startup_oaks32r_irq(unsigned int irq) -{ - enable_oaks32r_irq(irq); - return (0); -} - -static void shutdown_oaks32r_irq(unsigned int irq) -{ - unsigned long port; - - port = irq2port(irq); - outl(M32R_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type oaks32r_irq_type = -{ - .typename = "OAKS32R-IRQ", - .startup = startup_oaks32r_irq, - .shutdown = shutdown_oaks32r_irq, - .enable = enable_oaks32r_irq, - .disable = disable_oaks32r_irq, - .ack = mask_and_ack_mappi, - .end = end_oaks32r_irq -}; - -void __init init_IRQ(void) -{ - static int once = 0; - - if (once) - return; - else - once++; - -#ifdef CONFIG_NE2000 - /* INT3 : LAN controller (RTL8019AS) */ - irq_desc[M32R_IRQ_INT3].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT3].chip = &oaks32r_irq_type; - irq_desc[M32R_IRQ_INT3].action = 0; - irq_desc[M32R_IRQ_INT3].depth = 1; - icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_oaks32r_irq(M32R_IRQ_INT3); -#endif /* CONFIG_M32R_NE2000 */ - - /* MFT2 : system timer */ - irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_MFT2].chip = &oaks32r_irq_type; - irq_desc[M32R_IRQ_MFT2].action = 0; - irq_desc[M32R_IRQ_MFT2].depth = 1; - icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; - disable_oaks32r_irq(M32R_IRQ_MFT2); - -#ifdef CONFIG_SERIAL_M32R_SIO - /* SIO0_R : uart receive data */ - irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_R].chip = &oaks32r_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = 0; - irq_desc[M32R_IRQ_SIO0_R].depth = 1; - icu_data[M32R_IRQ_SIO0_R].icucr = 0; - disable_oaks32r_irq(M32R_IRQ_SIO0_R); - - /* SIO0_S : uart send data */ - irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_S].chip = &oaks32r_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = 0; - irq_desc[M32R_IRQ_SIO0_S].depth = 1; - icu_data[M32R_IRQ_SIO0_S].icucr = 0; - disable_oaks32r_irq(M32R_IRQ_SIO0_S); - - /* SIO1_R : uart receive data */ - irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_R].chip = &oaks32r_irq_type; - irq_desc[M32R_IRQ_SIO1_R].action = 0; - irq_desc[M32R_IRQ_SIO1_R].depth = 1; - icu_data[M32R_IRQ_SIO1_R].icucr = 0; - disable_oaks32r_irq(M32R_IRQ_SIO1_R); - - /* SIO1_S : uart send data */ - irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_S].chip = &oaks32r_irq_type; - irq_desc[M32R_IRQ_SIO1_S].action = 0; - irq_desc[M32R_IRQ_SIO1_S].depth = 1; - icu_data[M32R_IRQ_SIO1_S].icucr = 0; - disable_oaks32r_irq(M32R_IRQ_SIO1_S); -#endif /* CONFIG_SERIAL_M32R_SIO */ -} diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/kernel/setup_opsput.c deleted file mode 100644 index 62d6b71de45f..000000000000 --- a/arch/m32r/kernel/setup_opsput.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * linux/arch/m32r/kernel/setup_opsput.c - * - * Setup routines for Renesas OPSPUT Board - * - * Copyright (c) 2002-2005 - * Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi, Mamoru Sakugawa - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - */ - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/system.h> -#include <asm/m32r.h> -#include <asm/io.h> - -/* - * OPSP Interrupt Control Unit (Level 1) - */ -#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) - -icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ]; - -static void disable_opsput_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; - outl(data, port); -} - -static void enable_opsput_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; - outl(data, port); -} - -static void mask_and_ack_opsput(unsigned int irq) -{ - disable_opsput_irq(irq); -} - -static void end_opsput_irq(unsigned int irq) -{ - enable_opsput_irq(irq); -} - -static unsigned int startup_opsput_irq(unsigned int irq) -{ - enable_opsput_irq(irq); - return (0); -} - -static void shutdown_opsput_irq(unsigned int irq) -{ - unsigned long port; - - port = irq2port(irq); - outl(M32R_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type opsput_irq_type = -{ - .typename = "OPSPUT-IRQ", - .startup = startup_opsput_irq, - .shutdown = shutdown_opsput_irq, - .enable = enable_opsput_irq, - .disable = disable_opsput_irq, - .ack = mask_and_ack_opsput, - .end = end_opsput_irq -}; - -/* - * Interrupt Control Unit of PLD on OPSPUT (Level 2) - */ -#define irq2pldirq(x) ((x) - OPSPUT_PLD_IRQ_BASE) -#define pldirq2port(x) (unsigned long)((int)PLD_ICUCR1 + \ - (((x) - 1) * sizeof(unsigned short))) - -typedef struct { - unsigned short icucr; /* ICU Control Register */ -} pld_icu_data_t; - -static pld_icu_data_t pld_icu_data[OPSPUT_NUM_PLD_IRQ]; - -static void disable_opsput_pld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); -// disable_opsput_irq(M32R_IRQ_INT1); - port = pldirq2port(pldirq); - data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; - outw(data, port); -} - -static void enable_opsput_pld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); -// enable_opsput_irq(M32R_IRQ_INT1); - port = pldirq2port(pldirq); - data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; - outw(data, port); -} - -static void mask_and_ack_opsput_pld(unsigned int irq) -{ - disable_opsput_pld_irq(irq); -// mask_and_ack_opsput(M32R_IRQ_INT1); -} - -static void end_opsput_pld_irq(unsigned int irq) -{ - enable_opsput_pld_irq(irq); - end_opsput_irq(M32R_IRQ_INT1); -} - -static unsigned int startup_opsput_pld_irq(unsigned int irq) -{ - enable_opsput_pld_irq(irq); - return (0); -} - -static void shutdown_opsput_pld_irq(unsigned int irq) -{ - unsigned long port; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); -// shutdown_opsput_irq(M32R_IRQ_INT1); - port = pldirq2port(pldirq); - outw(PLD_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type opsput_pld_irq_type = -{ - .typename = "OPSPUT-PLD-IRQ", - .startup = startup_opsput_pld_irq, - .shutdown = shutdown_opsput_pld_irq, - .enable = enable_opsput_pld_irq, - .disable = disable_opsput_pld_irq, - .ack = mask_and_ack_opsput_pld, - .end = end_opsput_pld_irq -}; - -/* - * Interrupt Control Unit of PLD on OPSPUT-LAN (Level 2) - */ -#define irq2lanpldirq(x) ((x) - OPSPUT_LAN_PLD_IRQ_BASE) -#define lanpldirq2port(x) (unsigned long)((int)OPSPUT_LAN_ICUCR1 + \ - (((x) - 1) * sizeof(unsigned short))) - -static pld_icu_data_t lanpld_icu_data[OPSPUT_NUM_LAN_PLD_IRQ]; - -static void disable_opsput_lanpld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2lanpldirq(irq); - port = lanpldirq2port(pldirq); - data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; - outw(data, port); -} - -static void enable_opsput_lanpld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2lanpldirq(irq); - port = lanpldirq2port(pldirq); - data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; - outw(data, port); -} - -static void mask_and_ack_opsput_lanpld(unsigned int irq) -{ - disable_opsput_lanpld_irq(irq); -} - -static void end_opsput_lanpld_irq(unsigned int irq) -{ - enable_opsput_lanpld_irq(irq); - end_opsput_irq(M32R_IRQ_INT0); -} - -static unsigned int startup_opsput_lanpld_irq(unsigned int irq) -{ - enable_opsput_lanpld_irq(irq); - return (0); -} - -static void shutdown_opsput_lanpld_irq(unsigned int irq) -{ - unsigned long port; - unsigned int pldirq; - - pldirq = irq2lanpldirq(irq); - port = lanpldirq2port(pldirq); - outw(PLD_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type opsput_lanpld_irq_type = -{ - .typename = "OPSPUT-PLD-LAN-IRQ", - .startup = startup_opsput_lanpld_irq, - .shutdown = shutdown_opsput_lanpld_irq, - .enable = enable_opsput_lanpld_irq, - .disable = disable_opsput_lanpld_irq, - .ack = mask_and_ack_opsput_lanpld, - .end = end_opsput_lanpld_irq -}; - -/* - * Interrupt Control Unit of PLD on OPSPUT-LCD (Level 2) - */ -#define irq2lcdpldirq(x) ((x) - OPSPUT_LCD_PLD_IRQ_BASE) -#define lcdpldirq2port(x) (unsigned long)((int)OPSPUT_LCD_ICUCR1 + \ - (((x) - 1) * sizeof(unsigned short))) - -static pld_icu_data_t lcdpld_icu_data[OPSPUT_NUM_LCD_PLD_IRQ]; - -static void disable_opsput_lcdpld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2lcdpldirq(irq); - port = lcdpldirq2port(pldirq); - data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; - outw(data, port); -} - -static void enable_opsput_lcdpld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2lcdpldirq(irq); - port = lcdpldirq2port(pldirq); - data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; - outw(data, port); -} - -static void mask_and_ack_opsput_lcdpld(unsigned int irq) -{ - disable_opsput_lcdpld_irq(irq); -} - -static void end_opsput_lcdpld_irq(unsigned int irq) -{ - enable_opsput_lcdpld_irq(irq); - end_opsput_irq(M32R_IRQ_INT2); -} - -static unsigned int startup_opsput_lcdpld_irq(unsigned int irq) -{ - enable_opsput_lcdpld_irq(irq); - return (0); -} - -static void shutdown_opsput_lcdpld_irq(unsigned int irq) -{ - unsigned long port; - unsigned int pldirq; - - pldirq = irq2lcdpldirq(irq); - port = lcdpldirq2port(pldirq); - outw(PLD_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type opsput_lcdpld_irq_type = -{ - "OPSPUT-PLD-LCD-IRQ", - startup_opsput_lcdpld_irq, - shutdown_opsput_lcdpld_irq, - enable_opsput_lcdpld_irq, - disable_opsput_lcdpld_irq, - mask_and_ack_opsput_lcdpld, - end_opsput_lcdpld_irq -}; - -void __init init_IRQ(void) -{ -#if defined(CONFIG_SMC91X) - /* INT#0: LAN controller on OPSPUT-LAN (SMC91C111)*/ - irq_desc[OPSPUT_LAN_IRQ_LAN].status = IRQ_DISABLED; - irq_desc[OPSPUT_LAN_IRQ_LAN].chip = &opsput_lanpld_irq_type; - irq_desc[OPSPUT_LAN_IRQ_LAN].action = 0; - irq_desc[OPSPUT_LAN_IRQ_LAN].depth = 1; /* disable nested irq */ - lanpld_icu_data[irq2lanpldirq(OPSPUT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* "H" edge sense */ - disable_opsput_lanpld_irq(OPSPUT_LAN_IRQ_LAN); -#endif /* CONFIG_SMC91X */ - - /* MFT2 : system timer */ - irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_MFT2].chip = &opsput_irq_type; - irq_desc[M32R_IRQ_MFT2].action = 0; - irq_desc[M32R_IRQ_MFT2].depth = 1; - icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; - disable_opsput_irq(M32R_IRQ_MFT2); - - /* SIO0 : receive */ - irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_R].chip = &opsput_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = 0; - irq_desc[M32R_IRQ_SIO0_R].depth = 1; - icu_data[M32R_IRQ_SIO0_R].icucr = 0; - disable_opsput_irq(M32R_IRQ_SIO0_R); - - /* SIO0 : send */ - irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_S].chip = &opsput_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = 0; - irq_desc[M32R_IRQ_SIO0_S].depth = 1; - icu_data[M32R_IRQ_SIO0_S].icucr = 0; - disable_opsput_irq(M32R_IRQ_SIO0_S); - - /* SIO1 : receive */ - irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_R].chip = &opsput_irq_type; - irq_desc[M32R_IRQ_SIO1_R].action = 0; - irq_desc[M32R_IRQ_SIO1_R].depth = 1; - icu_data[M32R_IRQ_SIO1_R].icucr = 0; - disable_opsput_irq(M32R_IRQ_SIO1_R); - - /* SIO1 : send */ - irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_S].chip = &opsput_irq_type; - irq_desc[M32R_IRQ_SIO1_S].action = 0; - irq_desc[M32R_IRQ_SIO1_S].depth = 1; - icu_data[M32R_IRQ_SIO1_S].icucr = 0; - disable_opsput_irq(M32R_IRQ_SIO1_S); - - /* DMA1 : */ - irq_desc[M32R_IRQ_DMA1].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_DMA1].chip = &opsput_irq_type; - irq_desc[M32R_IRQ_DMA1].action = 0; - irq_desc[M32R_IRQ_DMA1].depth = 1; - icu_data[M32R_IRQ_DMA1].icucr = 0; - disable_opsput_irq(M32R_IRQ_DMA1); - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - /* INT#1: SIO0 Receive on PLD */ - irq_desc[PLD_IRQ_SIO0_RCV].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_SIO0_RCV].chip = &opsput_pld_irq_type; - irq_desc[PLD_IRQ_SIO0_RCV].action = 0; - irq_desc[PLD_IRQ_SIO0_RCV].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; - disable_opsput_pld_irq(PLD_IRQ_SIO0_RCV); - - /* INT#1: SIO0 Send on PLD */ - irq_desc[PLD_IRQ_SIO0_SND].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_SIO0_SND].chip = &opsput_pld_irq_type; - irq_desc[PLD_IRQ_SIO0_SND].action = 0; - irq_desc[PLD_IRQ_SIO0_SND].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; - disable_opsput_pld_irq(PLD_IRQ_SIO0_SND); -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - - /* INT#1: CFC IREQ on PLD */ - irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFIREQ].chip = &opsput_pld_irq_type; - irq_desc[PLD_IRQ_CFIREQ].action = 0; - irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* 'L' level sense */ - disable_opsput_pld_irq(PLD_IRQ_CFIREQ); - - /* INT#1: CFC Insert on PLD */ - irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFC_INSERT].chip = &opsput_pld_irq_type; - irq_desc[PLD_IRQ_CFC_INSERT].action = 0; - irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00; /* 'L' edge sense */ - disable_opsput_pld_irq(PLD_IRQ_CFC_INSERT); - - /* INT#1: CFC Eject on PLD */ - irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CFC_EJECT].chip = &opsput_pld_irq_type; - irq_desc[PLD_IRQ_CFC_EJECT].action = 0; - irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* 'H' edge sense */ - disable_opsput_pld_irq(PLD_IRQ_CFC_EJECT); - - /* - * INT0# is used for LAN, DIO - * We enable it here. - */ - icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; - enable_opsput_irq(M32R_IRQ_INT0); - - /* - * INT1# is used for UART, MMC, CF Controller in FPGA. - * We enable it here. - */ - icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; - enable_opsput_irq(M32R_IRQ_INT1); - -#if defined(CONFIG_USB) - outw(USBCR_OTGS, USBCR); /* USBCR: non-OTG */ - - irq_desc[OPSPUT_LCD_IRQ_USB_INT1].status = IRQ_DISABLED; - irq_desc[OPSPUT_LCD_IRQ_USB_INT1].chip = &opsput_lcdpld_irq_type; - irq_desc[OPSPUT_LCD_IRQ_USB_INT1].action = 0; - irq_desc[OPSPUT_LCD_IRQ_USB_INT1].depth = 1; - lcdpld_icu_data[irq2lcdpldirq(OPSPUT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* "L" level sense */ - disable_opsput_lcdpld_irq(OPSPUT_LCD_IRQ_USB_INT1); -#endif - /* - * INT2# is used for BAT, USB, AUDIO - * We enable it here. - */ - icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; - enable_opsput_irq(M32R_IRQ_INT2); - -#if defined(CONFIG_VIDEO_M32R_AR) - /* - * INT3# is used for AR - */ - irq_desc[M32R_IRQ_INT3].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_INT3].chip = &opsput_irq_type; - irq_desc[M32R_IRQ_INT3].action = 0; - irq_desc[M32R_IRQ_INT3].depth = 1; - icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; - disable_opsput_irq(M32R_IRQ_INT3); -#endif /* CONFIG_VIDEO_M32R_AR */ -} - -#if defined(CONFIG_SMC91X) - -#define LAN_IOSTART 0x300 -#define LAN_IOEND 0x320 -static struct resource smc91x_resources[] = { - [0] = { - .start = (LAN_IOSTART), - .end = (LAN_IOEND), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OPSPUT_LAN_IRQ_LAN, - .end = OPSPUT_LAN_IRQ_LAN, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_FB_S1D13XXX) - -#include <video/s1d13xxxfb.h> -#include <asm/s1d13806.h> - -static struct s1d13xxxfb_pdata s1d13xxxfb_data = { - .initregs = s1d13xxxfb_initregs, - .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), - .platform_init_video = NULL, -#ifdef CONFIG_PM - .platform_suspend_video = NULL, - .platform_resume_video = NULL, -#endif -}; - -static struct resource s1d13xxxfb_resources[] = { - [0] = { - .start = 0x10600000UL, - .end = 0x1073FFFFUL, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x10400000UL, - .end = 0x104001FFUL, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device s1d13xxxfb_device = { - .name = S1D_DEVICENAME, - .id = 0, - .dev = { - .platform_data = &s1d13xxxfb_data, - }, - .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), - .resource = s1d13xxxfb_resources, -}; -#endif - -static int __init platform_init(void) -{ -#if defined(CONFIG_SMC91X) - platform_device_register(&smc91x_device); -#endif -#if defined(CONFIG_FB_S1D13XXX) - platform_device_register(&s1d13xxxfb_device); -#endif - return 0; -} -arch_initcall(platform_init); diff --git a/arch/m32r/kernel/setup_usrv.c b/arch/m32r/kernel/setup_usrv.c deleted file mode 100644 index f5b4b5ac31e7..000000000000 --- a/arch/m32r/kernel/setup_usrv.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * linux/arch/m32r/kernel/setup_usrv.c - * - * Setup routines for MITSUBISHI uServer - * - * Copyright (c) 2001, 2002, 2003 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto - */ - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/system.h> -#include <asm/m32r.h> -#include <asm/io.h> - -#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) - -icu_data_t icu_data[M32700UT_NUM_CPU_IRQ]; - -static void disable_mappi_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; - outl(data, port); -} - -static void enable_mappi_irq(unsigned int irq) -{ - unsigned long port, data; - - port = irq2port(irq); - data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; - outl(data, port); -} - -static void mask_and_ack_mappi(unsigned int irq) -{ - disable_mappi_irq(irq); -} - -static void end_mappi_irq(unsigned int irq) -{ - enable_mappi_irq(irq); -} - -static unsigned int startup_mappi_irq(unsigned int irq) -{ - enable_mappi_irq(irq); - return 0; -} - -static void shutdown_mappi_irq(unsigned int irq) -{ - unsigned long port; - - port = irq2port(irq); - outl(M32R_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type mappi_irq_type = -{ - .typename = "M32700-IRQ", - .startup = startup_mappi_irq, - .shutdown = shutdown_mappi_irq, - .enable = enable_mappi_irq, - .disable = disable_mappi_irq, - .ack = mask_and_ack_mappi, - .end = end_mappi_irq -}; - -/* - * Interrupt Control Unit of PLD on M32700UT (Level 2) - */ -#define irq2pldirq(x) ((x) - M32700UT_PLD_IRQ_BASE) -#define pldirq2port(x) (unsigned long)((int)PLD_ICUCR1 + \ - (((x) - 1) * sizeof(unsigned short))) - -typedef struct { - unsigned short icucr; /* ICU Control Register */ -} pld_icu_data_t; - -static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ]; - -static void disable_m32700ut_pld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); - port = pldirq2port(pldirq); - data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; - outw(data, port); -} - -static void enable_m32700ut_pld_irq(unsigned int irq) -{ - unsigned long port, data; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); - port = pldirq2port(pldirq); - data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; - outw(data, port); -} - -static void mask_and_ack_m32700ut_pld(unsigned int irq) -{ - disable_m32700ut_pld_irq(irq); -} - -static void end_m32700ut_pld_irq(unsigned int irq) -{ - enable_m32700ut_pld_irq(irq); - end_mappi_irq(M32R_IRQ_INT1); -} - -static unsigned int startup_m32700ut_pld_irq(unsigned int irq) -{ - enable_m32700ut_pld_irq(irq); - return 0; -} - -static void shutdown_m32700ut_pld_irq(unsigned int irq) -{ - unsigned long port; - unsigned int pldirq; - - pldirq = irq2pldirq(irq); - port = pldirq2port(pldirq); - outw(PLD_ICUCR_ILEVEL7, port); -} - -static struct hw_interrupt_type m32700ut_pld_irq_type = -{ - .typename = "USRV-PLD-IRQ", - .startup = startup_m32700ut_pld_irq, - .shutdown = shutdown_m32700ut_pld_irq, - .enable = enable_m32700ut_pld_irq, - .disable = disable_m32700ut_pld_irq, - .ack = mask_and_ack_m32700ut_pld, - .end = end_m32700ut_pld_irq -}; - -void __init init_IRQ(void) -{ - static int once = 0; - int i; - - if (once) - return; - else - once++; - - /* MFT2 : system timer */ - irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_MFT2].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_MFT2].action = 0; - irq_desc[M32R_IRQ_MFT2].depth = 1; - icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; - disable_mappi_irq(M32R_IRQ_MFT2); - -#if defined(CONFIG_SERIAL_M32R_SIO) - /* SIO0_R : uart receive data */ - irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_R].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = 0; - irq_desc[M32R_IRQ_SIO0_R].depth = 1; - icu_data[M32R_IRQ_SIO0_R].icucr = 0; - disable_mappi_irq(M32R_IRQ_SIO0_R); - - /* SIO0_S : uart send data */ - irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO0_S].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = 0; - irq_desc[M32R_IRQ_SIO0_S].depth = 1; - icu_data[M32R_IRQ_SIO0_S].icucr = 0; - disable_mappi_irq(M32R_IRQ_SIO0_S); - - /* SIO1_R : uart receive data */ - irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_R].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO1_R].action = 0; - irq_desc[M32R_IRQ_SIO1_R].depth = 1; - icu_data[M32R_IRQ_SIO1_R].icucr = 0; - disable_mappi_irq(M32R_IRQ_SIO1_R); - - /* SIO1_S : uart send data */ - irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; - irq_desc[M32R_IRQ_SIO1_S].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO1_S].action = 0; - irq_desc[M32R_IRQ_SIO1_S].depth = 1; - icu_data[M32R_IRQ_SIO1_S].icucr = 0; - disable_mappi_irq(M32R_IRQ_SIO1_S); -#endif /* CONFIG_SERIAL_M32R_SIO */ - - /* INT#67-#71: CFC#0 IREQ on PLD */ - for (i = 0 ; i < CONFIG_CFC_NUM ; i++ ) { - irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_CF0 + i].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_CF0 + i].action = 0; - irq_desc[PLD_IRQ_CF0 + i].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_CF0 + i)].icucr - = PLD_ICUCR_ISMOD01; /* 'L' level sense */ - disable_m32700ut_pld_irq(PLD_IRQ_CF0 + i); - } - -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) - /* INT#76: 16552D#0 IREQ on PLD */ - irq_desc[PLD_IRQ_UART0].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_UART0].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_UART0].action = 0; - irq_desc[PLD_IRQ_UART0].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_UART0)].icucr - = PLD_ICUCR_ISMOD03; /* 'H' level sense */ - disable_m32700ut_pld_irq(PLD_IRQ_UART0); - - /* INT#77: 16552D#1 IREQ on PLD */ - irq_desc[PLD_IRQ_UART1].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_UART1].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_UART1].action = 0; - irq_desc[PLD_IRQ_UART1].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_UART1)].icucr - = PLD_ICUCR_ISMOD03; /* 'H' level sense */ - disable_m32700ut_pld_irq(PLD_IRQ_UART1); -#endif /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */ - -#if defined(CONFIG_IDC_AK4524) || defined(CONFIG_IDC_AK4524_MODULE) - /* INT#80: AK4524 IREQ on PLD */ - irq_desc[PLD_IRQ_SNDINT].status = IRQ_DISABLED; - irq_desc[PLD_IRQ_SNDINT].chip = &m32700ut_pld_irq_type; - irq_desc[PLD_IRQ_SNDINT].action = 0; - irq_desc[PLD_IRQ_SNDINT].depth = 1; /* disable nested irq */ - pld_icu_data[irq2pldirq(PLD_IRQ_SNDINT)].icucr - = PLD_ICUCR_ISMOD01; /* 'L' level sense */ - disable_m32700ut_pld_irq(PLD_IRQ_SNDINT); -#endif /* CONFIG_IDC_AK4524 || CONFIG_IDC_AK4524_MODULE */ - - /* - * INT1# is used for UART, MMC, CF Controller in FPGA. - * We enable it here. - */ - icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11; - enable_mappi_irq(M32R_IRQ_INT1); -} - diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c index 3eb305953497..9dae410014d8 100644 --- a/arch/m32r/kernel/smpboot.c +++ b/arch/m32r/kernel/smpboot.c @@ -43,6 +43,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/mm.h> +#include <linux/err.h> #include <linux/irq.h> #include <linux/bootmem.h> #include <linux/delay.h> diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c index bda85548de6c..b13dbbeaeafa 100644 --- a/arch/m32r/kernel/sys_m32r.c +++ b/arch/m32r/kernel/sys_m32r.c @@ -10,6 +10,7 @@ #include <linux/errno.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/fs.h> #include <linux/smp.h> #include <linux/sem.h> #include <linux/msg.h> diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 4e2d5b9f0a9a..942a8c7a4417 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -110,10 +110,7 @@ SECTIONS __initramfs_end = .; #endif - . = ALIGN(4096); - __per_cpu_start = .; - .data.percpu : { *(.data.percpu) } - __per_cpu_end = .; + PERCPU(4096) . = ALIGN(4096); __init_end = .; /* freed after init ends here */ diff --git a/arch/m32r/m32104ut/defconfig.m32104ut b/arch/m32r/m32104ut/defconfig.m32104ut deleted file mode 100644 index 7b68fe8d921e..000000000000 --- a/arch/m32r/m32104ut/defconfig.m32104ut +++ /dev/null @@ -1,1141 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 17:22:20 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -# CONFIG_EMBEDDED is not set -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor type and features -# -# CONFIG_PLAT_MAPPI is not set -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -# CONFIG_PLAT_MAPPI2 is not set -# CONFIG_PLAT_MAPPI3 is not set -CONFIG_PLAT_M32104UT=y -# CONFIG_CHIP_M32700 is not set -# CONFIG_CHIP_M32102 is not set -CONFIG_CHIP_M32104=y -# CONFIG_CHIP_VDEC2 is not set -# CONFIG_CHIP_OPSP is not set -CONFIG_ISA_M32R=y -CONFIG_BUS_CLOCK=54000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x04000000 -CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00700000 -CONFIG_IRAM_SIZE=0x00010000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -# CONFIG_SMP is not set -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -CONFIG_ISA=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -# CONFIG_BINFMT_FLAT is not set -CONFIG_BINFMT_MISC=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK_ENABLED is not set -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -# CONFIG_IP_NF_MATCH_AH is not set -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_AX88796 is not set -CONFIG_PARPORT_1284=y - -# -# Plug and Play support -# -CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set - -# -# Protocols -# -CONFIG_ISAPNP=y - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -CONFIG_CDROM_PKTCDVD_WCACHE=y -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPNP is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID456 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_NET_SB1000 is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_NET_VENDOR_3COM=y -# CONFIG_EL1 is not set -# CONFIG_EL2 is not set -# CONFIG_EL16 is not set -# CONFIG_EL3 is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -CONFIG_NET_ISA=y -# CONFIG_E2100 is not set -# CONFIG_EWRK3 is not set -# CONFIG_EEXPRESS is not set -# CONFIG_EEXPRESS_PRO is not set -# CONFIG_HPLAN_PLUS is not set -# CONFIG_HPLAN is not set -# CONFIG_LP486E is not set -# CONFIG_ETH16I is not set -CONFIG_NE2000=m -# CONFIG_SEEQ8005 is not set -CONFIG_NET_PCI=y -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set -# CONFIG_CS89x0 is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_PNP=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_M32R_SIO=y -# CONFIG_SERIAL_M32R_SIO_CONSOLE is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCF=m -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -CONFIG_I2C_ELEKTOR=m -CONFIG_I2C_ISA=m -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_SENSORS_ABITUGURU is not set -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -# CONFIG_SENSORS_ADM1026 is not set -CONFIG_SENSORS_ADM1031=m -# CONFIG_SENSORS_ADM9240 is not set -CONFIG_SENSORS_ASB100=m -# CONFIG_SENSORS_ATXP1 is not set -CONFIG_SENSORS_DS1621=m -# CONFIG_SENSORS_F71805F is not set -CONFIG_SENSORS_FSCHER=m -# CONFIG_SENSORS_FSCPOS is not set -CONFIG_SENSORS_GL518SM=m -# CONFIG_SENSORS_GL520SM is not set -CONFIG_SENSORS_IT87=m -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -# CONFIG_SENSORS_LM87 is not set -CONFIG_SENSORS_LM90=m -# CONFIG_SENSORS_LM92 is not set -CONFIG_SENSORS_MAX1619=m -# CONFIG_SENSORS_PC87360 is not set -CONFIG_SENSORS_SMSC47M1=m -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VT1211 is not set -CONFIG_SENSORS_W83781D=m -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83627HF=m -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_PMS is not set -CONFIG_VIDEO_BWQCAM=m -CONFIG_VIDEO_CQCAM=m -# CONFIG_VIDEO_W9966 is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_M32R_AR is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -CONFIG_JBD_DEBUG=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_CODEPAGE_932=y -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.smp b/arch/m32r/m32700ut/defconfig.m32700ut.smp deleted file mode 100644 index 13579917afef..000000000000 --- a/arch/m32r/m32700ut/defconfig.m32700ut.smp +++ /dev/null @@ -1,972 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Tue Dec 12 17:52:38 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -# CONFIG_PLAT_MAPPI is not set -# CONFIG_PLAT_USRV is not set -CONFIG_PLAT_M32700UT=y -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -# CONFIG_PLAT_MAPPI2 is not set -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -CONFIG_CHIP_M32700=y -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -# CONFIG_CHIP_OPSP is not set -CONFIG_MMU=y -CONFIG_TLB_ENTRIES=32 -CONFIG_ISA_M32R2=y -CONFIG_ISA_DSP_LEVEL2=y -CONFIG_ISA_DUAL_ISSUE=y -CONFIG_BUS_CLOCK=50000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00080000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -CONFIG_SMP=y -# CONFIG_CHIP_M32700_TS1 is not set -CONFIG_NR_CPUS=2 -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -# CONFIG_MTD_CHAR is not set -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=m -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=m -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_NE2000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_SERIAL_M32R_PLDSIO=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -CONFIG_DS1302=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -CONFIG_VIDEO_M32R_AR=m -CONFIG_VIDEO_M32R_AR_M64278=m - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_S1D13XXX=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_LOGO_M32R_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_TIFM_SD is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -CONFIG_JBD_DEBUG=y -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/m32700ut/defconfig.m32700ut.up b/arch/m32r/m32700ut/defconfig.m32700ut.up deleted file mode 100644 index 190f961d33e2..000000000000 --- a/arch/m32r/m32700ut/defconfig.m32700ut.up +++ /dev/null @@ -1,969 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Tue Dec 12 12:07:08 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -# CONFIG_PLAT_MAPPI is not set -# CONFIG_PLAT_USRV is not set -CONFIG_PLAT_M32700UT=y -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -# CONFIG_PLAT_MAPPI2 is not set -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -CONFIG_CHIP_M32700=y -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -# CONFIG_CHIP_OPSP is not set -CONFIG_MMU=y -CONFIG_TLB_ENTRIES=32 -CONFIG_ISA_M32R2=y -CONFIG_ISA_DSP_LEVEL2=y -CONFIG_ISA_DUAL_ISSUE=y -CONFIG_BUS_CLOCK=50000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00080000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -# CONFIG_SMP is not set -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -# CONFIG_MTD_CHAR is not set -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=m -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=m -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_NE2000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_SERIAL_M32R_PLDSIO=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -CONFIG_DS1302=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -CONFIG_VIDEO_M32R_AR=m -CONFIG_VIDEO_M32R_AR_M64278=m - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_S1D13XXX=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_LOGO_M32R_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_TIFM_SD is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -CONFIG_JBD_DEBUG=y -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB deleted file mode 100644 index 525dab46982b..000000000000 --- a/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB +++ /dev/null @@ -1,249 +0,0 @@ -# .gdbinit file -# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $ -#----- -# NOTE: this file is generated by a script, "gen_gdbinit.pl". -# (Please type "gen_gdbinit.pl --help" and check the help message). -# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ -#----- -# target platform: m32700ut - -# setting -set width 0d70 -set radix 0d16 - -debug_chaos - -# clk xin:cpu:bif:bus=25:200:50:50 -define clock_init - set *(unsigned long *)0x00ef4008 = 0x00000000 - set *(unsigned long *)0x00ef4004 = 0 - shell sleep 0.1 - # NOTE: Please change the master clock source from PLL-clock to Xin-clock - # and switch off PLL, before resetting the clock gear ratio. - - set *(unsigned long *)0x00ef4024 = 2 - set *(unsigned long *)0x00ef4020 = 2 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 3 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x00000200 -end - -# Initialize SDRAM controller -define sdram_init - # SDIR0 - set *(unsigned long *)0x00ef6008 = 0x00000182 - # SDIR1 - set *(unsigned long *)0x00ef600c = 0x00000001 - # Initialize wait - shell sleep 0.1 - # Ch0-MOD - set *(unsigned long *)0x00ef602c = 0x00000020 - # Ch0-TR - set *(unsigned long *)0x00ef6028 = 0x00041302 - # Ch0-ADR (size:16MB) - set *(unsigned long *)0x00ef6020 = 0x08000002 - # AutoRef On - set *(unsigned long *)0x00ef6004 = 0x00010517 - # Access enable - set *(unsigned long *)0x00ef6024 = 0x00000001 -end -document sdram_init - SDRAM controller initialization - 0x08000000 - 0x08ffffff (16MB) -end - -# Initialize BSEL3 for UT-CFC -define cfc_init - set $sfrbase = 0xa0ef0000 -# too fast -# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 -# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 -# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 -# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf -# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f -# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f -end -document cfc_init - CF controller initialization -end - -# MMU enable -define mmu_enable - set $evb=0x88000000 - set *(unsigned long *)0xffff0024=1 -end - -# MMU disable -define mmu_disable - set $evb=0 - set *(unsigned long *)0xffff0024=0 -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - set $nr_entries = $arg1 - use_mon_code - while ($i < $nr_entries) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb 0d32 -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb 0d32 -end - -# Initialize TLB entries -define init_tlb_entries - set $i = 0 - set $addr = $arg0 - set $nr_entries = $arg1 - use_mon_code - while ($i < $nr_entries) - set *(unsigned long *)($addr + 0x4) = 0 - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define tlb_init - set $itlb=0xfe000000 - init_tlb_entries $itlb 0d32 - set $dtlb=0xfe000800 - init_tlb_entries $dtlb 0d32 -end - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch - printf "EVB[0x%08lX]\n",$evb -end - -# Setup all -define setup - use_mon_code - set *(unsigned int)0xfffffffc=0x60 - shell sleep 0.1 - clock_init - shell sleep 0.1 - # SDRAM: 16MB - set *(unsigned long *)0x00ef6020 = 0x08000002 - cfc_init - # USB - set *(unsigned short *)0xb0301000 = 0x100 - - set $evb=0x08000000 -end - -# Load modules -define load_modules - use_debug_dma - load -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x08001000 - # INITRD_START -# set *(unsigned long *)($param + 0x0010) = 0x08300000 - # INITRD_SIZE -# set *(unsigned long *)($param + 0x0014) = 0x00000000 - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d200000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d50000000 - - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0" -end - -# Boot -define boot - set_kernel_parameters - set $fp = 0 - set $pc = 0x08002000 -# set *(unsigned char *)0xffffffff = 0x03 - si - c -end - -# Set breakpoints -define set_breakpoints - b *0x08000030 -end - -# Restart -define restart - sdireset - sdireset - set $pc = 0 - b *0x04001000 - b *0x08001000 - b *0x08002000 - si - c - tlb_init - del - setup - load_modules - boot -end - -define si - stepi - x/i $pc - show_reg -end - -sdireset -sdireset -file vmlinux -target m32rsdi -set $pc = 0 -b *0x04001000 -b *0x08001000 -b *0x08002000 -c -tlb_init -del -setup -load_modules -boot - diff --git a/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB b/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB deleted file mode 100644 index aa503657a49b..000000000000 --- a/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB +++ /dev/null @@ -1,249 +0,0 @@ -# .gdbinit file -# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $ -#----- -# NOTE: this file is generated by a script, "gen_gdbinit.pl". -# (Please type "gen_gdbinit.pl --help" and check the help message). -# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ -#----- -# target platform: m32700ut - -# setting -set width 0d70 -set radix 0d16 - -debug_chaos - -# clk xin:cpu:bif:bus=25:300:75:75 -define clock_init - set *(unsigned long *)0x00ef4008 = 0x00000000 - set *(unsigned long *)0x00ef4004 = 0 - shell sleep 0.1 - # NOTE: Please change the master clock source from PLL-clock to Xin-clock - # and switch off PLL, before resetting the clock gear ratio. - - set *(unsigned long *)0x00ef4024 = 2 - set *(unsigned long *)0x00ef4020 = 2 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 5 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x00000200 -end - -# Initialize SDRAM controller -define sdram_init - # SDIR0 - set *(unsigned long *)0x00ef6008 = 0x00000182 - # SDIR1 - set *(unsigned long *)0x00ef600c = 0x00000001 - # Initialize wait - shell sleep 0.1 - # Ch0-MOD - set *(unsigned long *)0x00ef602c = 0x00000020 - # Ch0-TR - set *(unsigned long *)0x00ef6028 = 0x00051502 - # Ch0-ADR (size:32MB) - set *(unsigned long *)0x00ef6020 = 0x08000003 - # AutoRef On - set *(unsigned long *)0x00ef6004 = 0x00010e24 - # Access enable - set *(unsigned long *)0x00ef6024 = 0x00000001 -end -document sdram_init - SDRAM controller initialization - 0x08000000 - 0x09ffffff (32MB) -end - -# Initialize BSEL3 for UT-CFC -define cfc_init - set $sfrbase = 0xa0ef0000 -# too fast -# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 -# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 -# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 -# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf -# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f -# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f -end -document cfc_init - CF controller initialization -end - -# MMU enable -define mmu_enable - set $evb=0x88000000 - set *(unsigned long *)0xffff0024=1 -end - -# MMU disable -define mmu_disable - set $evb=0 - set *(unsigned long *)0xffff0024=0 -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - set $nr_entries = $arg1 - use_mon_code - while ($i < $nr_entries) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb 0d32 -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb 0d32 -end - -# Initialize TLB entries -define init_tlb_entries - set $i = 0 - set $addr = $arg0 - set $nr_entries = $arg1 - use_mon_code - while ($i < $nr_entries) - set *(unsigned long *)($addr + 0x4) = 0 - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define tlb_init - set $itlb=0xfe000000 - init_tlb_entries $itlb 0d32 - set $dtlb=0xfe000800 - init_tlb_entries $dtlb 0d32 -end - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch - printf "EVB[0x%08lX]\n",$evb -end - -# Setup all -define setup - use_mon_code - set *(unsigned int)0xfffffffc=0x60 - shell sleep 0.1 - clock_init - shell sleep 0.1 - # SDRAM: 32MB - set *(unsigned long *)0x00ef6020 = 0x08000003 - cfc_init - # USB - set *(unsigned short *)0xb0301000 = 0x100 - - set $evb=0x08000000 -end - -# Load modules -define load_modules - use_debug_dma - load -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x08001000 - # INITRD_START -# set *(unsigned long *)($param + 0x0010) = 0x08300000 - # INITRD_SIZE -# set *(unsigned long *)($param + 0x0014) = 0x00000000 - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d300000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d75000000 - - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0" -end - -# Boot -define boot - set_kernel_parameters - set $fp = 0 - set $pc = 0x08002000 -# set *(unsigned char *)0xffffffff = 0x03 - si - c -end - -# Set breakpoints -define set_breakpoints - b *0x08000030 -end - -# Restart -define restart - sdireset - sdireset - set $pc = 0 - b *0x04001000 - b *0x08001000 - b *0x08002000 - si - c - tlb_init - del - setup - load_modules - boot -end - -define si - stepi - x/i $pc - show_reg -end - -sdireset -sdireset -file vmlinux -target m32rsdi -set $pc = 0 -b *0x04001000 -b *0x08001000 -b *0x08002000 -c -tlb_init -del -setup -load_modules -boot - diff --git a/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB b/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB deleted file mode 100644 index adc608aab2fe..000000000000 --- a/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB +++ /dev/null @@ -1,249 +0,0 @@ -# .gdbinit file -# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $ -#----- -# NOTE: this file is generated by a script, "gen_gdbinit.pl". -# (Please type "gen_gdbinit.pl --help" and check the help message). -# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ -#----- -# target platform: m32700ut - -# setting -set width 0d70 -set radix 0d16 - -debug_chaos - -# clk xin:cpu:bif:bus=25:400:100:50 -define clock_init - set *(unsigned long *)0x00ef4008 = 0x00000000 - set *(unsigned long *)0x00ef4004 = 0 - shell sleep 0.1 - # NOTE: Please change the master clock source from PLL-clock to Xin-clock - # and switch off PLL, before resetting the clock gear ratio. - - set *(unsigned long *)0x00ef4024 = 3 - set *(unsigned long *)0x00ef4020 = 2 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 7 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x00000200 -end - -# Initialize SDRAM controller -define sdram_init - # SDIR0 - set *(unsigned long *)0x00ef6008 = 0x00000182 - # SDIR1 - set *(unsigned long *)0x00ef600c = 0x00000001 - # Initialize wait - shell sleep 0.1 - # Ch0-MOD - set *(unsigned long *)0x00ef602c = 0x00000020 - # Ch0-TR - set *(unsigned long *)0x00ef6028 = 0x00041302 - # Ch0-ADR (size:32MB) - set *(unsigned long *)0x00ef6020 = 0x08000003 - # AutoRef On - set *(unsigned long *)0x00ef6004 = 0x00010517 - # Access enable - set *(unsigned long *)0x00ef6024 = 0x00000001 -end -document sdram_init - SDRAM controller initialization - 0x08000000 - 0x09ffffff (32MB) -end - -# Initialize BSEL3 for UT-CFC -define cfc_init - set $sfrbase = 0xa0ef0000 -# too fast -# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 -# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 -# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 -# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf -# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f -# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f -end -document cfc_init - CF controller initialization -end - -# MMU enable -define mmu_enable - set $evb=0x88000000 - set *(unsigned long *)0xffff0024=1 -end - -# MMU disable -define mmu_disable - set $evb=0 - set *(unsigned long *)0xffff0024=0 -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - set $nr_entries = $arg1 - use_mon_code - while ($i < $nr_entries) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb 0d32 -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb 0d32 -end - -# Initialize TLB entries -define init_tlb_entries - set $i = 0 - set $addr = $arg0 - set $nr_entries = $arg1 - use_mon_code - while ($i < $nr_entries) - set *(unsigned long *)($addr + 0x4) = 0 - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define tlb_init - set $itlb=0xfe000000 - init_tlb_entries $itlb 0d32 - set $dtlb=0xfe000800 - init_tlb_entries $dtlb 0d32 -end - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch - printf "EVB[0x%08lX]\n",$evb -end - -# Setup all -define setup - use_mon_code - set *(unsigned int)0xfffffffc=0x60 - shell sleep 0.1 - clock_init - shell sleep 0.1 - # SDRAM: 32MB - set *(unsigned long *)0x00ef6020 = 0x08000003 - cfc_init - # USB - set *(unsigned short *)0xb0301000 = 0x100 - - set $evb=0x08000000 -end - -# Load modules -define load_modules - use_debug_dma - load -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x08001000 - # INITRD_START -# set *(unsigned long *)($param + 0x0010) = 0x08300000 - # INITRD_SIZE -# set *(unsigned long *)($param + 0x0014) = 0x00000000 - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d400000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d50000000 - - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0" -end - -# Boot -define boot - set_kernel_parameters - set $fp = 0 - set $pc = 0x08002000 -# set *(unsigned char *)0xffffffff = 0x03 - si - c -end - -# Set breakpoints -define set_breakpoints - b *0x08000030 -end - -# Restart -define restart - sdireset - sdireset - set $pc = 0 - b *0x04001000 - b *0x08001000 - b *0x08002000 - si - c - tlb_init - del - setup - load_modules - boot -end - -define si - stepi - x/i $pc - show_reg -end - -sdireset -sdireset -file vmlinux -target m32rsdi -set $pc = 0 -b *0x04001000 -b *0x08001000 -b *0x08002000 -c -tlb_init -del -setup -load_modules -boot - diff --git a/arch/m32r/mappi/defconfig.nommu b/arch/m32r/mappi/defconfig.nommu deleted file mode 100644 index fbf6c384c9d0..000000000000 --- a/arch/m32r/mappi/defconfig.nommu +++ /dev/null @@ -1,775 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 17:57:45 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SYSVIPC is not set -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -# CONFIG_IKCONFIG_PROC is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -CONFIG_PLAT_MAPPI=y -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -# CONFIG_PLAT_MAPPI2 is not set -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -CONFIG_CHIP_M32700=y -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -# CONFIG_CHIP_OPSP is not set -# CONFIG_MMU is not set -CONFIG_TLB_ENTRIES=32 -CONFIG_ISA_M32R2=y -CONFIG_ISA_DSP_LEVEL2=y -CONFIG_ISA_DUAL_ISSUE=y -CONFIG_BUS_CLOCK=50000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x00000000 -CONFIG_MEMORY_SIZE=0x00E00000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00080000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -# CONFIG_SMP is not set -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_M32R_PCC=y -CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_FLAT=y -# CONFIG_BINFMT_ZFLAT is not set -# CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set -CONFIG_NE2000=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/mappi/defconfig.smp b/arch/m32r/mappi/defconfig.smp deleted file mode 100644 index 168669202b94..000000000000 --- a/arch/m32r/mappi/defconfig.smp +++ /dev/null @@ -1,895 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 17:50:59 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -CONFIG_PLAT_MAPPI=y -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -# CONFIG_PLAT_MAPPI2 is not set -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -CONFIG_CHIP_M32700=y -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -# CONFIG_CHIP_OPSP is not set -CONFIG_MMU=y -CONFIG_TLB_ENTRIES=32 -CONFIG_ISA_M32R2=y -CONFIG_ISA_DSP_LEVEL2=y -CONFIG_ISA_DUAL_ISSUE=y -CONFIG_BUS_CLOCK=10000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x04000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00080000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -CONFIG_SMP=y -CONFIG_CHIP_M32700_TS1=y -CONFIG_NR_CPUS=2 -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_M32R_PCC=y -CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set -CONFIG_NE2000=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -CONFIG_JFFS_PROC_FS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/m32r/mappi/defconfig.up b/arch/m32r/mappi/defconfig.up deleted file mode 100644 index 5ba00603c1a0..000000000000 --- a/arch/m32r/mappi/defconfig.up +++ /dev/null @@ -1,892 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 17:51:20 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -CONFIG_PLAT_MAPPI=y -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -# CONFIG_PLAT_MAPPI2 is not set -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -CONFIG_CHIP_M32700=y -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -# CONFIG_CHIP_OPSP is not set -CONFIG_MMU=y -CONFIG_TLB_ENTRIES=32 -CONFIG_ISA_M32R2=y -CONFIG_ISA_DSP_LEVEL2=y -CONFIG_ISA_DUAL_ISSUE=y -CONFIG_BUS_CLOCK=10000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x04000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00080000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -# CONFIG_SMP is not set -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_M32R_PCC=y -CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set -CONFIG_NE2000=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -CONFIG_JFFS_PROC_FS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/m32r/mappi/dot.gdbinit b/arch/m32r/mappi/dot.gdbinit deleted file mode 100644 index 7a1d293863eb..000000000000 --- a/arch/m32r/mappi/dot.gdbinit +++ /dev/null @@ -1,242 +0,0 @@ -# .gdbinit file -# $Id: dot.gdbinit.mappi,v 1.4 2004/10/20 02:24:37 takata Exp $ -#----- -# NOTE: this file is generated by a script, "gen_gdbinit.pl". -# (Please type "gen_gdbinit.pl --help" and check the help message). -# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ -#----- -# target platform: mappi - -# setting -set width 0d70 -set radix 0d16 -debug_chaos - -# clk xin:cpu:bif:bus=30:360:180:90 -define clock_init - set *(unsigned long *)0x00ef4024 = 2 - set *(unsigned long *)0x00ef4020 = 1 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 5 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x00000200 -end - -# Initialize programmable ports -define port_init - set $sfrbase = 0x00ef0000 - set *(unsigned short *)0x00ef1060 = 0x5555 - set *(unsigned short *)0x00ef1062 = 0x5555 - set *(unsigned short *)0x00ef1064 = 0x5555 - set *(unsigned short *)0x00ef1066 = 0x5555 - set *(unsigned short *)0x00ef1068 = 0x5555 - set *(unsigned short *)0x00ef106a = 0x0000 - set *(unsigned short *)0x00ef106e = 0x5555 - set *(unsigned short *)0x00ef1070 = 0x5555 - # LED ON - set *(unsigned char *)($sfrbase + 0x1015) = 0xff - set *(unsigned char *)($sfrbase + 0x1085) = 0xff - shell sleep 0.1 - # LED OFF - set *(unsigned char *)($sfrbase + 0x1085) = 0x00 -end -document port_init - P5=LED(output), P6.b4=LAN_RESET(output) -end - -# Initialize SDRAM controller -define sdram_init - # SDIR0 - set *(unsigned long *)0x00ef6008 = 0x00000182 - # SDIR1 - set *(unsigned long *)0x00ef600c = 0x00000001 - # Initialize wait - shell sleep 0.1 - # Ch0-MOD - set *(unsigned long *)0x00ef602c = 0x00000020 - # Ch0-TR - set *(unsigned long *)0x00ef6028 = 0x00051502 - # Ch0-ADR (size:64MB) - set *(unsigned long *)0x00ef6020 = 0x08000004 - # AutoRef On - set *(unsigned long *)0x00ef6004 = 0x00010e2b - # Access enable - set *(unsigned long *)0x00ef6024 = 0x00000001 -end -document sdram_init - SDRAM controller initialization - 0x08000000 - 0x0bffffff (64MB) -end - -# Initialize LAN controller -define lanc_init - set $sfrbase = 0x00ef0000 - # Set BSEL3 (BSEL3 for the Chaos's bselc) - set *(unsigned long *)($sfrbase + 0x5300) = 0x0a0a8040 - set *(unsigned long *)($sfrbase + 0x5304) = 0x01120203 - set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001 - # Reset (P5=LED,P6.b4=LAN_RESET) - set *(unsigned short *)($sfrbase + 0x106c) = 0x0000 - set *(unsigned char *)($sfrbase + 0x1016) = 0xff - set *(unsigned char *)($sfrbase + 0x1086) = 0xff - shell sleep 0.1 - # swivel: 0=normal, 4=reverse -# set *(unsigned char *)($sfrbase + 0x1086) = 0x00 - set *(unsigned char *)($sfrbase + 0x1086) = 0x04 - set *(unsigned long *)(0x0c000330) = 0xffffffff - # Set mac address - set $lanc = (void*)0x0c000300 - set *(unsigned long *)($lanc + 0x0000) = 0x00610010 - set *(unsigned long *)($lanc + 0x0004) = 0x00200030 - set *(unsigned long *)($lanc + 0x0008) = 0x00400050 - set *(unsigned long *)($lanc + 0x000c) = 0x00600007 -end -document lanc_init - LAN controller initialization - ex.) MAC address: 10 20 30 40 50 60 -end - -# LCD & CRT dual-head setting (8bpp) -define dispc_init - set $sfrbase = 0x00ef0000 - # BSEL4 Dispc - set *(unsigned long *)($sfrbase + 0x5400) = 0x0e0e8000 - set *(unsigned long *)($sfrbase + 0x5404) = 0x0012220a -end - -# MMU enable -define mmu_enable - set $evb=0x88000000 - set *(unsigned long *)0xffff0024=1 -end - -# MMU disable -define mmu_disable - set $evb=0 - set *(unsigned long *)0xffff0024=0 -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - set $nr_entries = $arg1 - use_mon_code - while ($i < $nr_entries) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb 0d32 -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb 0d32 -end - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch - printf "EVB[0x%08lX]\n",$evb -end - -# Setup all -define setup - use_mon_code - set *(unsigned int)0xfffffffc=0x60 - shell sleep 0.1 - clock_init - shell sleep 0.1 - port_init - sdram_init - lanc_init - dispc_init - set $evb=0x08000000 -end - -# Load modules -define load_modules - use_debug_dma - load -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x08001000 - # INITRD_START -# set *(unsigned long *)($param + 0x0010) = 0x08300000 - # INITRD_SIZE -# set *(unsigned long *)($param + 0x0014) = 0x00000000 - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d360000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d90000000 - - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" -end - -# Boot -define boot - set_kernel_parameters - set $fp = 0 - set $pc = 0x08002000 - si - c -end - -# Set breakpoints -define set_breakpoints - b *0x08000030 -end - -# Restart -define restart - sdireset - sdireset - setup - load_modules - boot -end - -sdireset -sdireset -file vmlinux -target m32rsdi -setup -#load_modules -#set_breakpoints -#boot - diff --git a/arch/m32r/mappi/dot.gdbinit.nommu b/arch/m32r/mappi/dot.gdbinit.nommu deleted file mode 100644 index 297536cf67cf..000000000000 --- a/arch/m32r/mappi/dot.gdbinit.nommu +++ /dev/null @@ -1,245 +0,0 @@ -# .gdbinit file -# $Id$ -#----- -# NOTE: this file is generated by a script, "gen_gdbinit.pl". -# (Please type "gen_gdbinit.pl --help" and check the help message). -# $ Id: gen_gdbinit.pl,v 1.5 2004/01/23 08:23:25 takata Exp $ -#----- -# target platform: mappi - -# setting -set width 0d70 -set radix 0d16 -debug_chaos - -# clk xin:cpu:bif:bus=25:200:50:50 -define clock_init - set *(unsigned long *)0x00ef4024 = 2 - set *(unsigned long *)0x00ef4020 = 2 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 3 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x00000200 -end - -# Initialize programmable ports -define port_init - set $sfrbase = 0x00ef0000 - set *(unsigned short *)0x00ef1060 = 0x5555 - set *(unsigned short *)0x00ef1062 = 0x5555 - set *(unsigned short *)0x00ef1064 = 0x5555 - set *(unsigned short *)0x00ef1066 = 0x5555 - set *(unsigned short *)0x00ef1068 = 0x5555 - set *(unsigned short *)0x00ef106a = 0x0000 - set *(unsigned short *)0x00ef106e = 0x5555 - set *(unsigned short *)0x00ef1070 = 0x5555 - # LED ON - set *(unsigned char *)($sfrbase + 0x1015) = 0xff - set *(unsigned char *)($sfrbase + 0x1085) = 0xff - shell sleep 0.1 - # LED OFF - set *(unsigned char *)($sfrbase + 0x1085) = 0x00 -end -document port_init - P5=LED(output), P6.b4=LAN_RESET(output) -end - -# Initialize SDRAM controller -define sdram_init - # SDIR0 - set *(unsigned long *)0x00ef6008 = 0x00000182 - # SDIR1 - set *(unsigned long *)0x00ef600c = 0x00000001 - # Initialize wait - shell sleep 0.1 - # Ch0-MOD - set *(unsigned long *)0x00ef602c = 0x00000020 - # Ch0-TR - set *(unsigned long *)0x00ef6028 = 0x00051502 - # Ch0-ADR (size:64MB) - set *(unsigned long *)0x00ef6020 = 0x00000004 - # AutoRef On - set *(unsigned long *)0x00ef6004 = 0x00010f05 - # Access enable - set *(unsigned long *)0x00ef6024 = 0x00000001 -end -document sdram_init - SDRAM controller initialization - 0x08000000 - 0x0bffffff (64MB) -end - -# Initialize LAN controller -define lanc_init - set $sfrbase = 0x00ef0000 - # Set BSEL3 (BSEL3 for the Chaos's bselc) - set *(unsigned long *)($sfrbase + 0x5300) = 0x07078040 - set *(unsigned long *)($sfrbase + 0x5304) = 0x01110102 - set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001 - # Reset (P5=LED,P6.b4=LAN_RESET) - set *(unsigned short *)($sfrbase + 0x106c) = 0x0000 - set *(unsigned char *)($sfrbase + 0x1016) = 0xff - set *(unsigned char *)($sfrbase + 0x1086) = 0xff - shell sleep 0.1 - # swivel: 0=normal, 4=reverse -# set *(unsigned char *)($sfrbase + 0x1086) = 0x00 - set *(unsigned char *)($sfrbase + 0x1086) = 0x04 - set *(unsigned long *)(0x0c000330) = 0xffffffff - # Set mac address - set $lanc = (void*)0x0c000300 - set *(unsigned long *)($lanc + 0x0000) = 0x00610010 - set *(unsigned long *)($lanc + 0x0004) = 0x00200030 - set *(unsigned long *)($lanc + 0x0008) = 0x00400050 - set *(unsigned long *)($lanc + 0x000c) = 0x00600007 -end -document lanc_init - LAN controller initialization - ex.) MAC address: 10 20 30 40 50 60 -end - -# LCD & CRT dual-head setting (8bpp) -define dispc_init - set $sfrbase = 0x00ef0000 - # BSEL4 Dispc - set *(unsigned long *)($sfrbase + 0x5400) = 0x06078000 - set *(unsigned long *)($sfrbase + 0x5404) = 0x00101101 -end - -# MMU enable -define mmu_enable - set $evb=0x88000000 - set *(unsigned long *)0xffff0024=1 -end - -# MMU disable -define mmu_disable - set $evb=0 - set *(unsigned long *)0xffff0024=0 -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - set $nr_entries = $arg1 - use_mon_code - while ($i < $nr_entries) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb 0d32 -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb 0d32 -end - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch - printf "EVB[0x%08lX]\n",$evb -end - -# Setup all -define setup - use_mon_code - set *(unsigned int)0xfffffffc=0x60 - shell sleep 0.1 - clock_init - shell sleep 0.1 - port_init - sdram_init - lanc_init - dispc_init - set $evb=0x00000000 -end - -# Load modules -define load_modules - use_debug_dma - load -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x00001000 - # INITRD_START - #set *(unsigned long *)($param + 0x0010) = 0x082a0000 - # INITRD_SIZE - #set *(unsigned long *)($param + 0x0014) = 0x00000000 - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d200000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d50000000 - - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.bbox-httpd nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" -end - -# Boot -define boot - set_kernel_parameters - set $fp = 0 - set $pc=0x00002000 - set *(long *)0xfffffff4=0x8080 -# b load_flat_binary -# set *(unsigned char *)0x08001003=0x63 -# set *(unsigned char *)0x08001003=0x02 - si -# c -end - -# Set breakpoints -define set_breakpoints - b *0x08000030 -end - -# Restart -define restart - sdireset - sdireset - setup - load_modules - boot -end - -sdireset -sdireset -file vmlinux -target m32rsdi -setup -load_modules -boot - diff --git a/arch/m32r/mappi/dot.gdbinit.smp b/arch/m32r/mappi/dot.gdbinit.smp deleted file mode 100644 index 171489a440d9..000000000000 --- a/arch/m32r/mappi/dot.gdbinit.smp +++ /dev/null @@ -1,344 +0,0 @@ -# .gdbinit file -# $Id$ - -# setting -set width 0d70 -set radix 0d16 -debug_chaos - -# clk xin:cpu:bif:bus=1:4:2:1 -define clock_init_on - set *(unsigned long *)0x00ef4024 = 2 - set *(unsigned long *)0x00ef4020 = 1 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 0x1 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x0200 -# set *(unsigned long *)0x00ef4008 = 0x0201 -end - -# clk xin:cpu:bif:bus=1:4:1:1 -define clock_init_on_1411 - set *(unsigned long *)0x00ef4024 = 2 - set *(unsigned long *)0x00ef4020 = 2 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 0x1 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x0200 -end - -# clk xin:cpu:bif:bus=1:4:2:1 -define clock_init_on_1421 - set *(unsigned long *)0x00ef4024 = 2 - set *(unsigned long *)0x00ef4020 = 1 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 0x1 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x0200 -end - -# clk xin:cpu:bif:bus=1:8:2:1 -define clock_init_on_1821 - set *(unsigned long *)0x00ef4024 = 3 - set *(unsigned long *)0x00ef4020 = 2 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 0x3 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x0200 -end - -# clk xin:cpu:bif:bus=1:8:4:1 -define clock_init_on_1841 - set *(unsigned long *)0x00ef4024 = 3 - set *(unsigned long *)0x00ef4020 = 1 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 0x3 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x0200 -end - -# clk xin:cpu:bif:bus=1:16:8:1 -define clock_init_on_11681 - set *(unsigned long *)0x00ef4024 = 4 - set *(unsigned long *)0x00ef4020 = 2 - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - set *(unsigned long *)0x00ef4004 = 0x7 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x0200 -end - -# clk xin:cpu:bif:bus=1:1:1:1 -define clock_init_off - # CPU - set *(unsigned long *)0x00ef4010 = 0 - set *(unsigned long *)0x00ef4014 = 0 - # BIF - set *(unsigned long *)0x00ef4020 = 0 - # BUS - set *(unsigned long *)0x00ef4024 = 0 - # PLL - set *(unsigned long *)0x00ef4008 = 0x0000 -end - -# Initialize programmable ports -define port_init - set $sfrbase = 0x00ef0000 - set *(unsigned short *)0x00ef1060 = 0x5555 - set *(unsigned short *)0x00ef1062 = 0x5555 - set *(unsigned short *)0x00ef1064 = 0x5555 - set *(unsigned short *)0x00ef1066 = 0x5555 - set *(unsigned short *)0x00ef1068 = 0x5555 - set *(unsigned short *)0x00ef106a = 0x0000 - set *(unsigned short *)0x00ef106e = 0x5555 - set *(unsigned short *)0x00ef1070 = 0x5555 - # LED ON - set *(unsigned char *)($sfrbase + 0x1015) = 0xff - set *(unsigned char *)($sfrbase + 0x1085) = 0xff - shell sleep 0.1 - # LED OFF - set *(unsigned char *)($sfrbase + 0x1085) = 0x00 -end -document port_init - P5=LED(output), P6.b4=LAN_RESET(output) -end - -# Initialize SDRAM controller for Mappi -define sdram_init - # SDIR0 - set *(unsigned long *)0x00ef6008 = 0x00000182 - # SDIR1 - set *(unsigned long *)0x00ef600c = 0x00000001 - # Initialize wait - shell sleep 0.1 - # Ch0-MOD - set *(unsigned long *)0x00ef602c = 0x00000020 - # Ch0-TR - set *(unsigned long *)0x00ef6028 = 0x00010002 - # Ch0-ADR - set *(unsigned long *)0x00ef6020 = 0x08000004 - # AutoRef On - set *(unsigned long *)0x00ef6004 = 0x00010107 - # Access enable - set *(unsigned long *)0x00ef6024 = 0x00000001 -end -document sdram_init - Mappi SDRAM controller initialization - 0x08000000 - 0x0bffffff (64MB) -end - -# Initialize LAN controller for Mappi -define lanc_init - set $sfrbase = 0x00ef0000 - # Set BSEL3 (BSEL3 for the Chaos's bselc) -# set *(unsigned long *)($sfrbase + 0x5300) = 0x01018040 -# set *(unsigned long *)($sfrbase + 0x5304) = 0x01011101 - set *(unsigned long *)($sfrbase + 0x5300) = 0x04048000 - set *(unsigned long *)($sfrbase + 0x5304) = 0x01011103 - set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001 - # Reset (P5=LED,P6.b4=LAN_RESET) - set *(unsigned short *)($sfrbase + 0x106c) = 0x0000 - set *(unsigned char *)($sfrbase + 0x1016) = 0xff - set *(unsigned char *)($sfrbase + 0x1086) = 0xff - shell sleep 0.1 -# set *(unsigned char *)($sfrbase + 0x1086) = 0x00 - set *(unsigned char *)($sfrbase + 0x1086) = 0x04 - set *(unsigned long *)(0x0c000330) = 0xffffffff - # Set mac address - set $lanc = (void*)0x0c000300 - set *(unsigned long *)($lanc + 0x0000) = 0x00610010 - set *(unsigned long *)($lanc + 0x0004) = 0x00200030 - set *(unsigned long *)($lanc + 0x0008) = 0x00400050 - set *(unsigned long *)($lanc + 0x000c) = 0x00600007 -end -document lanc_init - Mappi LAN controller initialization - ex.) MAC address: 10 20 30 40 50 60 -end - -# LCD & CRT dual-head setting (8bpp) -define dispc_init - set $sfrbase = 0x00ef0000 - # BSEL4 Dispc - # 20MHz -# set *(unsigned long *)($sfrbase + 0x5400) = 0x02028282 -# set *(unsigned long *)($sfrbase + 0x5404) = 0x00122202 - # 40MHz - set *(unsigned long *)($sfrbase + 0x5400) = 0x04048000 - set *(unsigned long *)($sfrbase + 0x5404) = 0x00101103 -end - -# MMU enable -define mmu_enable - set $evb=0x88000000 - set *(unsigned long *)0xffff0024=1 -end - -# MMU disable -define mmu_disable - set $evb=0 - set *(unsigned long *)0xffff0024=0 -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - use_mon_code - while ($i < 0d32 ) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end - use_debug_dma -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb -end - - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set $task = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$fp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch - printf "EVB[0x%08lX]\n",$evb -end - - -# Setup all -define setup - use_mon_code - set *(unsigned int)0xfffffffc=0x60 - shell sleep 0.1 -# clock_init_on_1411 - clock_init_on_1421 -# clock_init_on_1821 -# clock_init_on_1841 -# clock_init_on_11681 -# clock_init_off - shell sleep 0.1 - port_init - sdram_init - lanc_init - dispc_init - set $evb=0x08000000 -end - -# Load modules -define load_modules - use_debug_dma - load -# load ramdisk_082a0000.mot -# load romfs_082a0000.mot -# use_mon_code -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x08001000 - # INITRD_START -# set *(unsigned long *)($param + 0x0010) = 0x082a0000 - # INITRD_SIZE -# set *(unsigned long *)($param + 0x0014) = 0x00000000 - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d160000000 -# set *(unsigned long *)($param + 0x0018) = 0d80000000 -# set *(unsigned long *)($param + 0x0018) = 0d40000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d40000000 - - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - set {char[0x200]}($param + 0x100) = "console=tty1 console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.x nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" -# set {char[0x200]}($param + 0x100) = "console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.x nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" -end - -# Boot -define boot - set_kernel_parameters - set $pc=0x08002000 - set *(unsigned char *)0x08001003=0x03 - si - c -end - -# Set breakpoints -define set_breakpoints - b *0x08000030 -end - -## Boot MP -define boot_mp - set_kernel_parameters - set *(unsigned long *)0x00f00000 = boot - 0x80000000 - set *(unsigned long *)0x00eff2f8 = 0x2 - x 0x00eff2f8 - - set $pc=0x08002000 - si - c -end -document boot_mp - Boot BSP -end - -## Boot UP -define boot_up - set_kernel_parameters - set $pc=0x08002000 - si - c -end -document boot_up - Boot BSP -end - -# Restart -define restart - sdireset - sdireset - setup - load_modules - boot_mp -end - -sdireset -sdireset -file vmlinux -target m32rsdi -setup diff --git a/arch/m32r/mappi2/defconfig.opsp b/arch/m32r/mappi2/defconfig.opsp deleted file mode 100644 index b379ae96e6a7..000000000000 --- a/arch/m32r/mappi2/defconfig.opsp +++ /dev/null @@ -1,883 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 19:40:30 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -# CONFIG_IKCONFIG_PROC is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -# CONFIG_PLAT_MAPPI is not set -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -CONFIG_PLAT_MAPPI2=y -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -# CONFIG_CHIP_M32700 is not set -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -CONFIG_CHIP_OPSP=y -CONFIG_MMU=y -CONFIG_TLB_ENTRIES=16 -CONFIG_ISA_M32R2=y -CONFIG_ISA_DSP_LEVEL2=y -CONFIG_ISA_DUAL_ISSUE=y -CONFIG_BUS_CLOCK=50000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00008000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -# CONFIG_SMP is not set -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -# CONFIG_M32R_CFC is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_NE2000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_M32R_AR is not set - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -CONFIG_JBD_DEBUG=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/mappi2/defconfig.vdec2 b/arch/m32r/mappi2/defconfig.vdec2 deleted file mode 100644 index fe5b2a63cd68..000000000000 --- a/arch/m32r/mappi2/defconfig.vdec2 +++ /dev/null @@ -1,881 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 19:31:44 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -# CONFIG_IKCONFIG_PROC is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -# CONFIG_PLAT_MAPPI is not set -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -CONFIG_PLAT_MAPPI2=y -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -# CONFIG_CHIP_M32700 is not set -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -CONFIG_CHIP_VDEC2=y -# CONFIG_CHIP_OPSP is not set -CONFIG_MMU=y -CONFIG_TLB_ENTRIES=16 -CONFIG_ISA_M32R2=y -CONFIG_BUS_CLOCK=50000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00008000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -# CONFIG_SMP is not set -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -# CONFIG_M32R_CFC is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_NE2000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_M32R_AR is not set - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -CONFIG_JBD_DEBUG=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/mappi2/dot.gdbinit.vdec2 b/arch/m32r/mappi2/dot.gdbinit.vdec2 deleted file mode 100644 index 797a830bd4b7..000000000000 --- a/arch/m32r/mappi2/dot.gdbinit.vdec2 +++ /dev/null @@ -1,233 +0,0 @@ -# .gdbinit file -# $Id: dot.gdbinit.vdec2,v 1.2 2004/11/11 02:03:15 takata Exp $ - -# setting -set width 0d70 -set radix 0d16 -use_debug_dma - -# Initialize SDRAM controller for Mappi -define sdram_init - # SDIR0 - set *(unsigned long *)0x00ef6008=0x00000182 - # SDIR1 - set *(unsigned long *)0x00ef600c=0x00000001 - # Initialize wait - shell sleep 1 - # Ch0-MOD - set *(unsigned long *)0x00ef602c=0x00000020 - # Ch0-TR - set *(unsigned long *)0x00ef6028=0x00041302 - # Ch0-ADR - set *(unsigned long *)0x00ef6020=0x08000004 - # AutoRef On - set *(unsigned long *)0x00ef6004=0x00010705 - # Access enable - set *(unsigned long *)0x00ef6024=0x00000001 -end -document sdram_init - Mappi SDRAM controller initialization - 0x08000000 - 0x0bffffff (64MB) -end - -# Initialize SDRAM controller for Mappi -define sdram_init2 - # SDIR0 - set *(unsigned long *)0x00ef6008=0x00000182 - # Ch0-MOD - set *(unsigned long *)0x00ef602c=0x00000020 - # Ch0-TR - set *(unsigned long *)0x00ef6028=0x00010002 - # Ch0-ADR - set *(unsigned long *)0x00ef6020=0x08000004 - # AutoRef On - set *(unsigned long *)0x00ef6004=0x00010107 - # SDIR1 - set *(unsigned long *)0x00ef600c=0x00000001 - # Initialize wait - shell sleep 1 - # Access enable - set *(unsigned long *)0x00ef6024=0x00000001 - shell sleep 1 -end -document sdram_init - Mappi SDRAM controller initialization - 0x08000000 - 0x0bffffff (64MB) -end - -# Initialize LAN controller for Mappi -define lanc_init - # Set BSEL1 (BSEL3 for the Chaos's bselc) - #set *(unsigned long *)0x00ef5004 = 0x0fff330f - #set *(unsigned long *)0x00ef5004 = 0x01113301 - -# set *(unsigned long *)0x00ef5004 = 0x02011101 -# set *(unsigned long *)0x00ef5004 = 0x04441104 - - # BSEL5 -# set *(unsigned long *)0x00ef5014 = 0x0ccc310c -# set *(unsigned long *)0x00ef5014 = 0x0303310f -# set *(unsigned long *)0x00ef5014 = 0x01011102 -> NG -# set *(unsigned long *)0x00ef5014 = 0x03033103 - - set *(unsigned long *)0x00ef500c = 0x0b0b1304 - set *(unsigned long *)0x00ef5010 = 0x03033302 -# set *(unsigned long *)0x00ef5018 = 0x02223302 -end - -# MMU enable -define mmu_enable - set $evb=0x88000000 - set *(unsigned long *)0xffff0024=1 -end - -# MMU disable -define mmu_disable - set $evb=0 - set *(unsigned long *)0xffff0024=0 -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - while ($i < 0d16 ) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb -end - -# Cache ON -define set_cache_type - set $mctype = (void*)0xfffffff8 -# chaos -# set *(unsigned long *)($mctype) = 0x0000c000 -# m32102 i-cache only - set *(unsigned long *)($mctype) = 0x00008000 -# m32102 d-cache only -# set *(unsigned long *)($mctype) = 0x00004000 -end -define cache_on - set $param = (void*)0x08001000 - set *(unsigned long *)($param) = 0x60ff6102 -end - - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set $task = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch - printf "EVB[0x%08lX]\n",$evb - - set $mests = *(unsigned long *)0xffff000c - set $mdeva = *(unsigned long *)0xffff0010 - printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva -end - - -# Setup all -define setup - sdram_init -# lanc_init -# dispc_init -# set $evb=0x08000000 -end - -# Load modules -define load_modules - use_debug_dma - load -# load busybox.mot -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x08001000 - - ## MOUNT_ROOT_RDONLY - set {long}($param+0x00)=0 - ## RAMDISK_FLAGS - #set {long}($param+0x04)=0 - ## ORIG_ROOT_DEV - #set {long}($param+0x08)=0x00000100 - ## LOADER_TYPE - #set {long}($param+0x0C)=0 - ## INITRD_START - set {long}($param+0x10)=0x082a0000 - ## INITRD_SIZE - set {long}($param+0x14)=0d6200000 - - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d25000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d25000000 - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0" - - -end - -# Boot -define boot - set_kernel_parameters - debug_chaos - set $pc=0x08002000 - set $fp=0 - del b - si -end - -# Restart -define restart - sdireset - sdireset - setup - load_modules - boot -end - -sdireset -sdireset -file vmlinux -target m32rsdi - -restart -boot - - diff --git a/arch/m32r/mappi3/defconfig.smp b/arch/m32r/mappi3/defconfig.smp deleted file mode 100644 index 2f352267a6d9..000000000000 --- a/arch/m32r/mappi3/defconfig.smp +++ /dev/null @@ -1,898 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Mon Dec 11 19:57:33 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -# CONFIG_PLAT_MAPPI is not set -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -# CONFIG_PLAT_OPSPUT is not set -# CONFIG_PLAT_OAKS32R is not set -# CONFIG_PLAT_MAPPI2 is not set -CONFIG_PLAT_MAPPI3=y -# CONFIG_PLAT_M32104UT is not set -CONFIG_CHIP_M32700=y -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -# CONFIG_CHIP_OPSP is not set -CONFIG_MMU=y -CONFIG_TLB_ENTRIES=32 -CONFIG_ISA_M32R2=y -CONFIG_ISA_DSP_LEVEL2=y -CONFIG_ISA_DUAL_ISSUE=y -CONFIG_BUS_CLOCK=10000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x08000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00080000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -CONFIG_SMP=y -# CONFIG_CHIP_M32700_TS1 is not set -CONFIG_NR_CPUS=2 -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -# CONFIG_M32R_PCC is not set -# CONFIG_M32R_CFC is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_NE2000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -CONFIG_JFFS_PROC_FS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/arch/m32r/mappi3/dot.gdbinit b/arch/m32r/mappi3/dot.gdbinit deleted file mode 100644 index 89c22184e139..000000000000 --- a/arch/m32r/mappi3/dot.gdbinit +++ /dev/null @@ -1,224 +0,0 @@ -# .gdbinit file -# $Id: dot.gdbinit,v 1.1 2005/04/11 02:21:08 sakugawa Exp $ - -# setting -set width 0d70 -set radix 0d16 -use_debug_dma - -# Initialize SDRAM controller for Mappi -define sdram_init - # SDIR0 - set *(unsigned long *)0x00ef6008 = 0x00000182 - # SDIR1 - set *(unsigned long *)0x00ef600c = 0x00000001 - # Initialize wait - shell sleep 0.1 - # MOD - set *(unsigned long *)0x00ef602c = 0x00000020 - set *(unsigned long *)0x00ef604c = 0x00000020 - # TR - set *(unsigned long *)0x00ef6028 = 0x00051502 - set *(unsigned long *)0x00ef6048 = 0x00051502 - # ADR - set *(unsigned long *)0x00ef6020 = 0x08000004 - set *(unsigned long *)0x00ef6040 = 0x0c000004 - # AutoRef On - set *(unsigned long *)0x00ef6004 = 0x00010517 - # Access enable - set *(unsigned long *)0x00ef6024 = 0x00000001 - set *(unsigned long *)0x00ef6044 = 0x00000001 -end - -# Initialize LAN controller for Mappi -define lanc_init - # Set BSEL4 - #set *(unsigned long *)0x00ef5004 = 0x0fff330f - #set *(unsigned long *)0x00ef5004 = 0x01113301 - -# set *(unsigned long *)0x00ef5004 = 0x02011101 -# set *(unsigned long *)0x00ef5004 = 0x04441104 -end - -define clock_init - set *(unsigned long *)0x00ef4010 = 2 - set *(unsigned long *)0x00ef4014 = 2 - set *(unsigned long *)0x00ef4020 = 3 - set *(unsigned long *)0x00ef4024 = 3 - set *(unsigned long *)0x00ef4004 = 0x7 -# shell sleep 0.1 -# set *(unsigned long *)0x00ef4004 = 0x5 - shell sleep 0.1 - set *(unsigned long *)0x00ef4008 = 0x0200 -end - -define port_init - set $sfrbase = 0x00ef0000 - set *(unsigned short *)0x00ef1060 = 0x5555 - set *(unsigned short *)0x00ef1062 = 0x5555 - set *(unsigned short *)0x00ef1064 = 0x5555 - set *(unsigned short *)0x00ef1066 = 0x5555 - set *(unsigned short *)0x00ef1068 = 0x5555 - set *(unsigned short *)0x00ef106a = 0x0000 - set *(unsigned short *)0x00ef106e = 0x5555 - set *(unsigned short *)0x00ef1070 = 0x5555 -end - -# MMU enable -define mmu_enable - set $evb=0x88000000 - set *(unsigned long *)0xffff0024=1 -end - -# MMU disable -define mmu_disable - set $evb=0 - set *(unsigned long *)0xffff0024=0 -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - while ($i < 0d16 ) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb -end - -# Cache ON -define set_cache_type - set $mctype = (void*)0xfffffff8 -# chaos -# set *(unsigned long *)($mctype) = 0x0000c000 -# m32102 i-cache only - set *(unsigned long *)($mctype) = 0x00008000 -# m32102 d-cache only -# set *(unsigned long *)($mctype) = 0x00004000 -end -define cache_on - set $param = (void*)0x08001000 - set *(unsigned long *)($param) = 0x60ff6102 -end - - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set $task = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch - printf "EVB[0x%08lX]\n",$evb - - set $mests = *(unsigned long *)0xffff000c - set $mdeva = *(unsigned long *)0xffff0010 - printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva -end - - -# Setup all -define setup - clock_init - shell sleep 0.1 - port_init - sdram_init -# lanc_init -# dispc_init -# set $evb=0x08000000 -end - -# Load modules -define load_modules - use_debug_dma - load -# load busybox.mot -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x08001000 - - ## MOUNT_ROOT_RDONLY - set {long}($param+0x00)=0 - ## RAMDISK_FLAGS - #set {long}($param+0x04)=0 - ## ORIG_ROOT_DEV - #set {long}($param+0x08)=0x00000100 - ## LOADER_TYPE - #set {long}($param+0x0C)=0 - ## INITRD_START - set {long}($param+0x10)=0x082a0000 - ## INITRD_SIZE - set {long}($param+0x14)=0d6200000 - - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d100000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d50000000 - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6_04 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0" - - -end - -# Boot -define boot - set_kernel_parameters - debug_chaos - set *(unsigned long *)0x00f00000=0x08002000 - set $pc=0x08002000 - set $fp=0 - del b - si -end - -# Restart -define restart - sdireset - sdireset - setup - load_modules - boot -end - -sdireset -sdireset -file vmlinux -target m32rsdi - -restart -boot diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c index f3935ba24946..676a1c443d28 100644 --- a/arch/m32r/mm/fault.c +++ b/arch/m32r/mm/fault.c @@ -80,6 +80,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code, struct vm_area_struct * vma; unsigned long page, addr; int write; + int fault; siginfo_t info; /* @@ -195,20 +196,18 @@ survive: */ addr = (address & PAGE_MASK); set_thread_fault_code(error_code); - switch (handle_mm_fault(mm, vma, addr, write)) { - case VM_FAULT_MINOR: - tsk->min_flt++; - break; - case VM_FAULT_MAJOR: - tsk->maj_flt++; - break; - case VM_FAULT_SIGBUS: - goto do_sigbus; - case VM_FAULT_OOM: + fault = handle_mm_fault(mm, vma, addr, write); + if (unlikely(fault & VM_FAULT_ERROR)) { + if (fault & VM_FAULT_OOM) goto out_of_memory; - default: - BUG(); + else if (fault & VM_FAULT_SIGBUS) + goto do_sigbus; + BUG(); } + if (fault & VM_FAULT_MAJOR) + tsk->maj_flt++; + else + tsk->min_flt++; set_thread_fault_code(0); up_read(&mm->mmap_sem); return; diff --git a/arch/m32r/oaks32r/defconfig.nommu b/arch/m32r/oaks32r/defconfig.nommu deleted file mode 100644 index aaa00828e0d3..000000000000 --- a/arch/m32r/oaks32r/defconfig.nommu +++ /dev/null @@ -1,742 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Tue Dec 12 12:09:17 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SYSVIPC is not set -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -# CONFIG_PLAT_MAPPI is not set -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -# CONFIG_PLAT_OPSPUT is not set -CONFIG_PLAT_OAKS32R=y -# CONFIG_PLAT_MAPPI2 is not set -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -# CONFIG_CHIP_M32700 is not set -CONFIG_CHIP_M32102=y -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -# CONFIG_CHIP_OPSP is not set -CONFIG_ISA_M32R=y -CONFIG_BUS_CLOCK=33333333 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x01000000 -CONFIG_MEMORY_SIZE=0x00800000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00010000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PREEMPT=y -# CONFIG_SMP is not set -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_FLAT=y -# CONFIG_BINFMT_ZFLAT is not set -# CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set -CONFIG_NE2000=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -# CONFIG_HEADERS_CHECK is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/oaks32r/dot.gdbinit.nommu b/arch/m32r/oaks32r/dot.gdbinit.nommu deleted file mode 100644 index d481d972b802..000000000000 --- a/arch/m32r/oaks32r/dot.gdbinit.nommu +++ /dev/null @@ -1,154 +0,0 @@ -# .gdbinit file -# $Id: dot.gdbinit.oaks32r,v 1.4 2004/10/20 02:24:37 takata Exp $ -#----- -# NOTE: this file is generated by a script, "gen_gdbinit.pl". -# (Please type "gen_gdbinit.pl --help" and check the help message). -# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ -#----- -# target platform: oaks32r - -# setting -set width 0d70 -set radix 0d16 - -# clk xin:cpu:bus=16:66:33 -define clock_init - set *(unsigned long *)0x00ef4008 = 1 - shell sleep 0.1 - set *(unsigned long *)0x00ef4000 = 0x00020100 -end - -# Initialize programmable ports -define port_init - set *(unsigned long *)0x00ef1000 = 0x1 - set *(unsigned long *)0x00ef1060 = 0x01400001 - set *(unsigned long *)0x00ef1064 = 0x00015555 - set *(unsigned long *)0x00ef1068 = 0x55555050 - set *(unsigned long *)0x00ef106c = 0x05150040 -end - -# Initialize SDRAM controller -define sdram_init - set *(unsigned long *)0x00ef6008 = 0x00000182 - set *(unsigned long *)0x00ef600c = 0x00000001 - shell sleep 0.1 - set *(unsigned long *)0x00ef602c = 0x00000010 - set *(unsigned long *)0x00ef6028 = 0x00000300 - set *(unsigned long *)0x00ef6048 = 0x00000001 - set *(unsigned long *)0x00ef6020 = 0x01000041 - set *(unsigned long *)0x00ef6004 = 0x00010117 - set *(unsigned long *)0x00ef6010 = 0x00000001 - set *(unsigned long *)0x00ef6024 = 0x00000001 -end -document sdram_init - SDRAM controller initialization - 0x01000000 - 0x017fffff (8MB) -end - -# Initialize LAN controller -define lanc_init - set *(unsigned long *)0x00ef5008 = 0x03031303 - #RST DRV (P64) - set *(unsigned char *)0x00ef1046 = 0x08 - set *(unsigned char *)0x00ef1026 = 0xff - set *(unsigned char *)0x00ef1026 = 0x00 - set *(unsigned short *)0x02000630 = 0xffff -end - -# Show current task structure -define show_current - set $current = $spi & 0xffffe000 - printf "$current=0x%08lX\n",$current - print *(struct task_struct *)$current -end - -# Show user assigned task structure -define show_task - set = $arg0 & 0xffffe000 - printf "$task=0x%08lX\n",$task - print *(struct task_struct *)$task -end -document show_task - Show user assigned task structure - arg0 : task structure address -end - -# Show M32R registers -define show_regs - printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 - printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 - printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 - printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp - printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu - printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch -end - -# Setup all -define setup - use_mon_code - set *(unsigned int)0xfffffffc=0x60 - shell sleep 0.1 - clock_init - shell sleep 0.1 - port_init - sdram_init - lanc_init -end - -# Load modules -define load_modules - use_debug_dma - load -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x01001000 - # INITRD_START -# set *(unsigned long *)($param + 0x0010) = 0x00000000 - # INITRD_SIZE -# set *(unsigned long *)($param + 0x0014) = 0x00000000 - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d66666667 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d33333333 - - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" -end - -# Boot -define boot - set_kernel_parameters - set $fp = 0 - set $pc = 0x01002000 - si - c -end - -# Set breakpoints -define set_breakpoints - b *0x00000020 - b *0x00000030 -end - -# Restart -define restart - sdireset - sdireset - setup - load_modules - boot -end - -sdireset -sdireset -file vmlinux -target m32rsdi -setup -#load_modules -#set_breakpoints -#boot - diff --git a/arch/m32r/opsput/defconfig.opsput b/arch/m32r/opsput/defconfig.opsput deleted file mode 100644 index 461f95e72d17..000000000000 --- a/arch/m32r/opsput/defconfig.opsput +++ /dev/null @@ -1,850 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Wed Dec 13 18:34:36 2006 -# -CONFIG_M32R=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -# CONFIG_IKCONFIG_PROC is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -# CONFIG_PLAT_MAPPI is not set -# CONFIG_PLAT_USRV is not set -# CONFIG_PLAT_M32700UT is not set -CONFIG_PLAT_OPSPUT=y -# CONFIG_PLAT_OAKS32R is not set -# CONFIG_PLAT_MAPPI2 is not set -# CONFIG_PLAT_MAPPI3 is not set -# CONFIG_PLAT_M32104UT is not set -# CONFIG_CHIP_M32700 is not set -# CONFIG_CHIP_M32102 is not set -# CONFIG_CHIP_M32104 is not set -# CONFIG_CHIP_VDEC2 is not set -CONFIG_CHIP_OPSP=y -CONFIG_MMU=y -CONFIG_TLB_ENTRIES=32 -CONFIG_ISA_M32R2=y -CONFIG_ISA_DSP_LEVEL2=y -CONFIG_ISA_DUAL_ISSUE=y -CONFIG_BUS_CLOCK=50000000 -CONFIG_TIMER_DIVIDE=128 -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_MEMORY_START=0x08000000 -CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_NOHIGHMEM=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_IRAM_START=0x00f00000 -CONFIG_IRAM_SIZE=0x00010000 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_PREEMPT is not set -# CONFIG_SMP is not set -CONFIG_NODES_SHIFT=1 - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_ISA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_M32R_CFC=y -CONFIG_M32R_CFC_NUM=1 -CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_SMC91X=y -# CONFIG_NE2000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_M32R_SIO=y -CONFIG_SERIAL_M32R_SIO_CONSOLE=y -CONFIG_SERIAL_M32R_PLDSIO=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -CONFIG_DS1302=y -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -CONFIG_JBD_DEBUG=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_UNWIND_INFO is not set -CONFIG_FORCED_INLINING=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set diff --git a/arch/m32r/opsput/dot.gdbinit b/arch/m32r/opsput/dot.gdbinit deleted file mode 100644 index b7e6c6640857..000000000000 --- a/arch/m32r/opsput/dot.gdbinit +++ /dev/null @@ -1,218 +0,0 @@ -# .gdbinit file -# $Id: dot.gdbinit,v 1.1 2004/07/27 06:54:20 sakugawa Exp $ - -# setting -set width 0d70 -set radix 0d16 -set height 0 -debug_chaos - -# clk xin:cpu:bus=1:8:1 -define clock_init_on_181 - set *(unsigned long *)0x00ef400c = 0x2 - set *(unsigned long *)0x00ef4004 = 0x1 - shell sleep 0.1 - set *(unsigned long *)0x00ef4000 = 0x101 -end -# clk xin:cpu:bus=1:8:2 -define clock_init_on_182 - set *(unsigned long *)0x00ef400c = 0x1 - set *(unsigned long *)0x00ef4004 = 0x1 - shell sleep 0.1 - set *(unsigned long *)0x00ef4000 = 0x101 -end - -# clk xin:cpu:bus=1:8:4 -define clock_init_on_184 - set *(unsigned long *)0x00ef400c = 0x0 - set *(unsigned long *)0x00ef4004 = 0x1 - shell sleep 0.1 - set *(unsigned long *)0x00ef4000 = 0x101 -end - -# clk xin:cpu:bus=1:1:1 -define clock_init_off - shell sleep 0.1 - set *(unsigned long *)0x00ef4000 = 0x0 - shell sleep 0.1 - set *(unsigned long *)0x00ef4004 = 0x0 - shell sleep 0.1 - set *(unsigned long *)0x00ef400c = 0x0 -end - -define tlb_init - set $tlbbase = 0xfe000000 - set *(unsigned long *)($tlbbase + 0x04) = 0x0 - set *(unsigned long *)($tlbbase + 0x0c) = 0x0 - set *(unsigned long *)($tlbbase + 0x14) = 0x0 - set *(unsigned long *)($tlbbase + 0x1c) = 0x0 - set *(unsigned long *)($tlbbase + 0x24) = 0x0 - set *(unsigned long *)($tlbbase + 0x2c) = 0x0 - set *(unsigned long *)($tlbbase + 0x34) = 0x0 - set *(unsigned long *)($tlbbase + 0x3c) = 0x0 - set *(unsigned long *)($tlbbase + 0x44) = 0x0 - set *(unsigned long *)($tlbbase + 0x4c) = 0x0 - set *(unsigned long *)($tlbbase + 0x54) = 0x0 - set *(unsigned long *)($tlbbase + 0x5c) = 0x0 - set *(unsigned long *)($tlbbase + 0x64) = 0x0 - set *(unsigned long *)($tlbbase + 0x6c) = 0x0 - set *(unsigned long *)($tlbbase + 0x74) = 0x0 - set *(unsigned long *)($tlbbase + 0x7c) = 0x0 - set *(unsigned long *)($tlbbase + 0x84) = 0x0 - set *(unsigned long *)($tlbbase + 0x8c) = 0x0 - set *(unsigned long *)($tlbbase + 0x94) = 0x0 - set *(unsigned long *)($tlbbase + 0x9c) = 0x0 - set *(unsigned long *)($tlbbase + 0xa4) = 0x0 - set *(unsigned long *)($tlbbase + 0xac) = 0x0 - set *(unsigned long *)($tlbbase + 0xb4) = 0x0 - set *(unsigned long *)($tlbbase + 0xbc) = 0x0 - set *(unsigned long *)($tlbbase + 0xc4) = 0x0 - set *(unsigned long *)($tlbbase + 0xcc) = 0x0 - set *(unsigned long *)($tlbbase + 0xd4) = 0x0 - set *(unsigned long *)($tlbbase + 0xdc) = 0x0 - set *(unsigned long *)($tlbbase + 0xe4) = 0x0 - set *(unsigned long *)($tlbbase + 0xec) = 0x0 - set *(unsigned long *)($tlbbase + 0xf4) = 0x0 - set *(unsigned long *)($tlbbase + 0xfc) = 0x0 - set $tlbbase = 0xfe000800 - set *(unsigned long *)($tlbbase + 0x04) = 0x0 - set *(unsigned long *)($tlbbase + 0x0c) = 0x0 - set *(unsigned long *)($tlbbase + 0x14) = 0x0 - set *(unsigned long *)($tlbbase + 0x1c) = 0x0 - set *(unsigned long *)($tlbbase + 0x24) = 0x0 - set *(unsigned long *)($tlbbase + 0x2c) = 0x0 - set *(unsigned long *)($tlbbase + 0x34) = 0x0 - set *(unsigned long *)($tlbbase + 0x3c) = 0x0 - set *(unsigned long *)($tlbbase + 0x44) = 0x0 - set *(unsigned long *)($tlbbase + 0x4c) = 0x0 - set *(unsigned long *)($tlbbase + 0x54) = 0x0 - set *(unsigned long *)($tlbbase + 0x5c) = 0x0 - set *(unsigned long *)($tlbbase + 0x64) = 0x0 - set *(unsigned long *)($tlbbase + 0x6c) = 0x0 - set *(unsigned long *)($tlbbase + 0x74) = 0x0 - set *(unsigned long *)($tlbbase + 0x7c) = 0x0 - set *(unsigned long *)($tlbbase + 0x84) = 0x0 - set *(unsigned long *)($tlbbase + 0x8c) = 0x0 - set *(unsigned long *)($tlbbase + 0x94) = 0x0 - set *(unsigned long *)($tlbbase + 0x9c) = 0x0 - set *(unsigned long *)($tlbbase + 0xa4) = 0x0 - set *(unsigned long *)($tlbbase + 0xac) = 0x0 - set *(unsigned long *)($tlbbase + 0xb4) = 0x0 - set *(unsigned long *)($tlbbase + 0xbc) = 0x0 - set *(unsigned long *)($tlbbase + 0xc4) = 0x0 - set *(unsigned long *)($tlbbase + 0xcc) = 0x0 - set *(unsigned long *)($tlbbase + 0xd4) = 0x0 - set *(unsigned long *)($tlbbase + 0xdc) = 0x0 - set *(unsigned long *)($tlbbase + 0xe4) = 0x0 - set *(unsigned long *)($tlbbase + 0xec) = 0x0 - set *(unsigned long *)($tlbbase + 0xf4) = 0x0 - set *(unsigned long *)($tlbbase + 0xfc) = 0x0 -end - -define load_modules - use_debug_dma - load -end - -# Set kernel parameters -define set_kernel_parameters - set $param = (void*)0x88001000 - # INITRD_START -# set *(unsigned long *)($param + 0x0010) = 0x08300000 - # INITRD_SIZE -# set *(unsigned long *)($param + 0x0014) = 0x00400000 - # M32R_CPUCLK - set *(unsigned long *)($param + 0x0018) = 0d200000000 - # M32R_BUSCLK - set *(unsigned long *)($param + 0x001c) = 0d50000000 -# set *(unsigned long *)($param + 0x001c) = 0d25000000 - - # M32R_TIMER_DIVIDE - set *(unsigned long *)($param + 0x0020) = 0d128 - - set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 \ - root=/dev/nfsroot \ - nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6 \ - nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \ - mem=16m \0" -end - -define boot - set_kernel_parameters - set $pc=0x88002000 - set $fp=0 - set $evb=0x88000000 - si - c -end - -# Show TLB entries -define show_tlb_entries - set $i = 0 - set $addr = $arg0 - use_mon_code - while ($i < 0d32 ) - set $tlb_tag = *(unsigned long*)$addr - set $tlb_data = *(unsigned long*)($addr + 4) - printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data - set $i = $i + 1 - set $addr = $addr + 8 - end -# use_debug_dma -end -define itlb - set $itlb=0xfe000000 - show_tlb_entries $itlb -end -define dtlb - set $dtlb=0xfe000800 - show_tlb_entries $dtlb -end - -define show_regs - printf " R0[%08lx] R1[%08lx] R2[%08lx] R3[%08lx]\n",$r0,$r1,$r2,$r3 - printf " R4[%08lx] R5[%08lx] R6[%08lx] R7[%08lx]\n",$r4,$r5,$r6,$r7 - printf " R8[%08lx] R9[%08lx] R10[%08lx] R11[%08lx]\n",$r8,$r9,$r10,$r11 - printf "R12[%08lx] FP[%08lx] LR[%08lx] SP[%08lx]\n",$r12,$fp,$lr,$sp - printf "PSW[%08lx] CBR[%08lx] SPI[%08lx] SPU[%08lx]\n",$psw,$cbr,$spi,$spu - printf "BPC[%08lx] PC[%08lx] ACCL[%08lx] ACCH[%08lx]\n",$bpc,$pc,$accl,$acch - printf "EVB[%08lx]\n",$evb -end - -define restart - sdireset - sdireset - en 1 - set $pc=0x0 - c - tlb_init - setup - load_modules - boot -end - -define setup - debug_chaos -# Clock -# shell sleep 0.1 -# clock_init_off -# shell sleep 1 -# clock_init_on_182 -# shell sleep 0.1 -# SDRAM - set *(unsigned long *)0xa0ef6004 = 0x0001053f - set *(unsigned long *)0xa0ef6028 = 0x00031102 -end - -sdireset -sdireset -file vmlinux -target m32rsdi -set $pc=0x0 -b *0x30000 -c -dis 1 -setup -tlb_init -load_modules -boot |