diff options
Diffstat (limited to 'arch/mips/mips-boards/sim/sim_time.c')
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_time.c | 202 |
1 files changed, 0 insertions, 202 deletions
diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c deleted file mode 100644 index 7224ffe31d36..000000000000 --- a/arch/mips/mips-boards/sim/sim_time.c +++ /dev/null @@ -1,202 +0,0 @@ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/mc146818rtc.h> -#include <linux/timex.h> - -#include <asm/mipsregs.h> -#include <asm/ptrace.h> -#include <asm/hardirq.h> -#include <asm/div64.h> -#include <asm/cpu.h> -#include <asm/time.h> -#include <asm/irq.h> -#include <asm/mc146818-time.h> -#include <asm/msc01_ic.h> -#include <asm/smp.h> - -#include <asm/mips-boards/generic.h> -#include <asm/mips-boards/prom.h> -#include <asm/mips-boards/simint.h> - - -unsigned long cpu_khz; - -irqreturn_t sim_timer_interrupt(int irq, void *dev_id) -{ -#ifdef CONFIG_SMP - int cpu = smp_processor_id(); - - /* - * CPU 0 handles the global timer interrupt job - * resets count/compare registers to trigger next timer int. - */ -#ifndef CONFIG_MIPS_MT_SMTC - if (cpu == 0) { - timer_interrupt(irq, dev_id); - } - else { - /* Everyone else needs to reset the timer int here as - ll_local_timer_interrupt doesn't */ - /* - * FIXME: need to cope with counter underflow. - * More support needs to be added to kernel/time for - * counter/timer interrupts on multiple CPU's - */ - write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); - } -#else /* SMTC */ - /* - * In SMTC system, one Count/Compare set exists per VPE. - * Which TC within a VPE gets the interrupt is essentially - * random - we only know that it shouldn't be one with - * IXMT set. Whichever TC gets the interrupt needs to - * send special interprocessor interrupts to the other - * TCs to make sure that they schedule, etc. - * - * That code is specific to the SMTC kernel, not to - * the simulation platform, so it's invoked from - * the general MIPS timer_interrupt routine. - * - * We have a problem in that the interrupt vector code - * had to turn off the timer IM bit to avoid redundant - * entries, but we may never get to mips_cpu_irq_end - * to turn it back on again if the scheduler gets - * involved. So we clear the pending timer here, - * and re-enable the mask... - */ - - int vpflags = dvpe(); - write_c0_compare (read_c0_count() - 1); - clear_c0_cause(0x100 << cp0_compare_irq); - set_c0_status(0x100 << cp0_compare_irq); - irq_enable_hazard(); - evpe(vpflags); - - if(cpu_data[cpu].vpe_id == 0) timer_interrupt(irq, dev_id); - else write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); - smtc_timer_broadcast(cpu_data[cpu].vpe_id); - -#endif /* CONFIG_MIPS_MT_SMTC */ - - /* - * every CPU should do profiling and process accounting - */ - local_timer_interrupt (irq, dev_id); - return IRQ_HANDLED; -#else - return timer_interrupt (irq, dev_id); -#endif -} - - - -/* - * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect - */ -static unsigned int __init estimate_cpu_frequency(void) -{ - unsigned int prid = read_c0_prid() & 0xffff00; - unsigned int count; - -#if 1 - /* - * hardwire the board frequency to 12MHz. - */ - - if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) || - (prid == (PRID_COMP_MIPS | PRID_IMP_25KF))) - count = 12000000; - else - count = 6000000; -#else - unsigned int flags; - - local_irq_save(flags); - - /* Start counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - /* Start r4k counter. */ - write_c0_count(0); - - /* Read counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - count = read_c0_count(); - - /* restore interrupts */ - local_irq_restore(flags); -#endif - - mips_hpt_frequency = count; - - if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && - (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) - count *= 2; - - count += 5000; /* round */ - count -= count%10000; - - return count; -} - -void __init sim_time_init(void) -{ - unsigned int est_freq, flags; - - local_irq_save(flags); - - - /* Set Data mode - binary. */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); - - - est_freq = estimate_cpu_frequency (); - - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); - - cpu_khz = est_freq / 1000; - - local_irq_restore(flags); -} - -static int mips_cpu_timer_irq; - -static void mips_timer_dispatch(void) -{ - do_IRQ(mips_cpu_timer_irq); -} - - -void __init plat_timer_setup(struct irqaction *irq) -{ - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); - mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; - } - else { - if (cpu_has_vint) - set_vi_handler(cp0_compare_irq, mips_timer_dispatch); - mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; - } - - /* we are using the cpu counter for timer interrupts */ - irq->handler = sim_timer_interrupt; - setup_irq(mips_cpu_timer_irq, irq); - -#ifdef CONFIG_SMP - /* irq_desc(riptor) is a global resource, when the interrupt overlaps - on seperate cpu's the first one tries to handle the second interrupt. - The effect is that the int remains disabled on the second cpu. - Mark the interrupt with IRQ_PER_CPU to avoid any confusion */ - irq_desc[mips_cpu_timer_irq].flags |= IRQ_PER_CPU; - set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq); -#endif -} |