summaryrefslogtreecommitdiff
path: root/arch/mips/pmc-sierra
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pmc-sierra')
-rw-r--r--arch/mips/pmc-sierra/Kconfig46
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_serial.c1
-rw-r--r--arch/mips/pmc-sierra/yosemite/Makefile4
-rw-r--r--arch/mips/pmc-sierra/yosemite/i2c-yosemite.c188
-rw-r--r--arch/mips/pmc-sierra/yosemite/irq.c4
-rw-r--r--arch/mips/pmc-sierra/yosemite/prom.c4
-rw-r--r--arch/mips/pmc-sierra/yosemite/setup.c5
-rw-r--r--arch/mips/pmc-sierra/yosemite/smp.c25
8 files changed, 74 insertions, 203 deletions
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
index 24d514c9dff9..abbd0bbfabd7 100644
--- a/arch/mips/pmc-sierra/Kconfig
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -1,3 +1,49 @@
+choice
+ prompt "PMC-Sierra MSP SOC type"
+ depends on PMC_MSP
+
+config PMC_MSP4200_EVAL
+ bool "PMC-Sierra MSP4200 Eval Board"
+ select IRQ_MSP_SLP
+ select HW_HAS_PCI
+
+config PMC_MSP4200_GW
+ bool "PMC-Sierra MSP4200 VoIP Gateway"
+ select IRQ_MSP_SLP
+ select HW_HAS_PCI
+
+config PMC_MSP7120_EVAL
+ bool "PMC-Sierra MSP7120 Eval Board"
+ select SYS_SUPPORTS_MULTITHREADING
+ select IRQ_MSP_CIC
+ select HW_HAS_PCI
+
+config PMC_MSP7120_GW
+ bool "PMC-Sierra MSP7120 Residential Gateway"
+ select SYS_SUPPORTS_MULTITHREADING
+ select IRQ_MSP_CIC
+ select HW_HAS_PCI
+
+config PMC_MSP7120_FPGA
+ bool "PMC-Sierra MSP7120 FPGA"
+ select SYS_SUPPORTS_MULTITHREADING
+ select IRQ_MSP_CIC
+ select HW_HAS_PCI
+
+endchoice
+
+menu "Options for PMC-Sierra MSP chipsets"
+ depends on PMC_MSP
+
+config PMC_MSP_EMBEDDED_ROOTFS
+ bool "Root filesystem embedded in kernel image"
+ select MTD
+ select MTD_BLOCK
+ select MTD_PMC_MSP_RAMROOT
+ select MTD_RAM
+
+endmenu
+
config HYPERTRANSPORT
bool "Hypertransport Support for PMC-Sierra Yosemite"
depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index c41b53faa8f6..e25bac537d77 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -32,6 +32,7 @@
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/serial.h>
+#include <linux/serial_8250.h>
#include <msp_prom.h>
#include <msp_int.h>
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index e931e0d44229..8fd9a04e3534 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -2,7 +2,9 @@
# Makefile for the PMC-Sierra Titan
#
-obj-y += irq.o i2c-yosemite.o prom.o py-console.o setup.o
+obj-y += irq.o prom.o py-console.o setup.o
obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_SMP) += smp.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c b/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c
deleted file mode 100644
index 85b14c73c226..000000000000
--- a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Copyright (C) 2003 PMC-Sierra Inc.
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Detailed Description:
- *
- * This block implements the I2C interface to the slave devices like the
- * Atmel 24C32 EEPROM and the MAX 1619 Sensors device. The I2C Master interface
- * can be controlled by the SCMB block. And the SCMB block kicks in only when
- * using the Ethernet Mode of operation and __not__ the SysAD mode
- *
- * The SCMB controls the two modes: MDIO and the I2C. The MDIO mode is used to
- * communicate with the Quad-PHY from Marvel. The I2C is used to communicate
- * with the I2C slave devices. It seems that the driver does not explicitly
- * deal with the control of SDA and SCL serial lines. So, the driver will set
- * the slave address, drive the command and then the data. The SCMB will then
- * control the two serial lines as required.
- *
- * It seems the documents are very unclear abt this. Hence, I took some time
- * out to write the desciption to have an idea of how the I2C can actually
- * work. Currently, this Linux driver wont be integrated into the generic Linux
- * I2C framework. And finally, the I2C interface is also known as the 2BI
- * interface. 2BI means 2-bit interface referring to SDA and SCL serial lines
- * respectively.
- *
- * - Manish Lachwani (12/09/2003)
- */
-
-#include "i2c-yosemite.h"
-
-/*
- * Poll the I2C interface for the BUSY bit.
- */
-static int titan_i2c_poll(void)
-{
- int i = 0;
- unsigned long val = 0;
-
- for (i = 0; i < TITAN_I2C_MAX_POLL; i++) {
- val = TITAN_I2C_READ(TITAN_I2C_COMMAND);
-
- if (!(val & 0x8000))
- return 0;
- }
-
- return TITAN_I2C_ERR_TIMEOUT;
-}
-
-/*
- * Execute the I2C command
- */
-int titan_i2c_xfer(unsigned int slave_addr, titan_i2c_command * cmd,
- int size, unsigned int *addr)
-{
- int loop, bytes = 0, i;
- unsigned int *write_data, data, *read_data;
- unsigned long reg_val, val;
-
- write_data = cmd->data;
- read_data = addr;
-
- TITAN_I2C_WRITE(TITAN_I2C_SLAVE_ADDRESS, slave_addr);
-
- if (cmd->type == TITAN_I2C_CMD_WRITE)
- loop = cmd->write_size;
- else
- loop = size;
-
- while (loop > 0) {
- if ((cmd->type == TITAN_I2C_CMD_WRITE) ||
- (cmd->type == TITAN_I2C_CMD_READ_WRITE)) {
-
- reg_val = TITAN_I2C_DATA;
- for (i = 0; i < TITAN_I2C_MAX_WORDS_PER_RW;
- ++i, write_data += 2, reg_val += 4) {
- if (bytes < cmd->write_size) {
- data = write_data[0];
- ++data;
- }
-
- if (bytes < cmd->write_size) {
- data = write_data[1];
- ++data;
- }
-
- TITAN_I2C_WRITE(reg_val, data);
- }
- }
-
- TITAN_I2C_WRITE(TITAN_I2C_COMMAND,
- (unsigned int) (cmd->type << 13));
- if (titan_i2c_poll() != TITAN_I2C_ERR_OK)
- return TITAN_I2C_ERR_TIMEOUT;
-
- if ((cmd->type == TITAN_I2C_CMD_READ) ||
- (cmd->type == TITAN_I2C_CMD_READ_WRITE)) {
-
- reg_val = TITAN_I2C_DATA;
- for (i = 0; i < TITAN_I2C_MAX_WORDS_PER_RW;
- ++i, read_data += 2, reg_val += 4) {
- data = TITAN_I2C_READ(reg_val);
-
- if (bytes < size) {
- read_data[0] = data & 0xff;
- ++bytes;
- }
-
- if (bytes < size) {
- read_data[1] =
- ((data >> 8) & 0xff);
- ++bytes;
- }
- }
- }
-
- loop -= (TITAN_I2C_MAX_WORDS_PER_RW * 2);
- }
-
- /*
- * Read the Interrupt status and then return the appropriate error code
- */
-
- val = TITAN_I2C_READ(TITAN_I2C_INTERRUPTS);
- if (val & 0x0020)
- return TITAN_I2C_ERR_ARB_LOST;
-
- if (val & 0x0040)
- return TITAN_I2C_ERR_NO_RESP;
-
- if (val & 0x0080)
- return TITAN_I2C_ERR_DATA_COLLISION;
-
- return TITAN_I2C_ERR_OK;
-}
-
-/*
- * Init the I2C subsystem of the PMC-Sierra Yosemite board
- */
-int titan_i2c_init(titan_i2c_config * config)
-{
- unsigned int val;
-
- /*
- * Reset the SCMB and program into the I2C mode
- */
- TITAN_I2C_WRITE(TITAN_I2C_SCMB_CONTROL, 0xA000);
- TITAN_I2C_WRITE(TITAN_I2C_SCMB_CONTROL, 0x2000);
-
- /*
- * Configure the filtera and clka values
- */
- val = TITAN_I2C_READ(TITAN_I2C_SCMB_CLOCK_A);
- val |= ((val & ~(0xF000)) | ((config->filtera << 12) & 0xF000));
- val |= ((val & ~(0x03FF)) | (config->clka & 0x03FF));
- TITAN_I2C_WRITE(TITAN_I2C_SCMB_CLOCK_A, val);
-
- /*
- * Configure the filterb and clkb values
- */
- val = TITAN_I2C_READ(TITAN_I2C_SCMB_CLOCK_B);
- val |= ((val & ~(0xF000)) | ((config->filterb << 12) & 0xF000));
- val |= ((val & ~(0x03FF)) | (config->clkb & 0x03FF));
- TITAN_I2C_WRITE(TITAN_I2C_SCMB_CLOCK_B, val);
-
- return TITAN_I2C_ERR_OK;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 428d1f45a287..4decc2807867 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -56,6 +56,9 @@
#define HYPERTRANSPORT_INTC 0x7a /* INTC# */
#define HYPERTRANSPORT_INTD 0x7b /* INTD# */
+extern void titan_mailbox_irq(void);
+
+#ifdef CONFIG_HYPERTRANSPORT
/*
* Handle hypertransport & SMP interrupts. The interrupt lines are scarce.
* For interprocessor interrupts, the best thing to do is to use the INTMSG
@@ -107,6 +110,7 @@ static void ll_ht_smp_irq_handler(int irq)
do_IRQ(irq);
}
+#endif
asmlinkage void plat_irq_dispatch(void)
{
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 1e1685e415a4..0cd78f0f5f2d 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -34,7 +34,7 @@ extern void prom_grab_secondary(void);
struct callvectors *debug_vectors;
extern unsigned long yosemite_base;
-extern unsigned long cpu_clock;
+extern unsigned long cpu_clock_freq;
const char *get_system_type(void)
{
@@ -119,7 +119,7 @@ void __init prom_init(void)
16);
if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0)
- cpu_clock =
+ cpu_clock_freq =
simple_strtol(*env + strlen("cpuclock="), NULL,
10);
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 6a6e15e40009..58862c8d1d00 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -39,6 +39,7 @@
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
@@ -58,7 +59,7 @@ unsigned char titan_ge_mac_addr_base[6] = {
0x00, 0xe0, 0x04, 0x00, 0x00, 0x21
};
-unsigned long cpu_clock;
+unsigned long cpu_clock_freq;
unsigned long yosemite_base;
static struct m48t37_rtc *m48t37_base;
@@ -139,7 +140,7 @@ void __init plat_timer_setup(struct irqaction *irq)
void yosemite_time_init(void)
{
- mips_hpt_frequency = cpu_clock / 2;
+ mips_hpt_frequency = cpu_clock_freq / 2;
mips_hpt_frequency = 33000000 * 3 * 5;
}
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 305491e74dbe..b0f12cd2968a 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -77,7 +77,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* stack so the first thing we do is throw away that stuff and load useful
* values into the registers ...
*/
-void prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
{
unsigned long gp = (unsigned long) task_thread_info(idle);
unsigned long sp = __KSTK_TOS(idle);
@@ -97,32 +97,37 @@ void prom_cpus_done(void)
* After we've done initial boot, this function is called to allow the
* board code to clean up state, if needed
*/
-void prom_init_secondary(void)
+void __cpuinit prom_init_secondary(void)
{
set_c0_status(ST0_CO | ST0_IE | ST0_IM);
}
-void prom_smp_finish(void)
+void __cpuinit prom_smp_finish(void)
{
}
-asmlinkage void titan_mailbox_irq(void)
+void titan_mailbox_irq(void)
{
int cpu = smp_processor_id();
unsigned long status;
- if (cpu == 0) {
+ switch (cpu) {
+ case 0:
status = OCD_READ(RM9000x2_OCD_INTP0STATUS3);
OCD_WRITE(RM9000x2_OCD_INTP0CLEAR3, status);
- }
- if (cpu == 1) {
+ if (status & 0x2)
+ smp_call_function_interrupt();
+ break;
+
+ case 1:
status = OCD_READ(RM9000x2_OCD_INTP1STATUS3);
OCD_WRITE(RM9000x2_OCD_INTP1CLEAR3, status);
- }
- if (status & 0x2)
- smp_call_function_interrupt();
+ if (status & 0x2)
+ smp_call_function_interrupt();
+ break;
+ }
}
/*