summaryrefslogtreecommitdiff
path: root/arch/mips/pnx8550/common/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pnx8550/common/setup.c')
-rw-r--r--arch/mips/pnx8550/common/setup.c145
1 files changed, 145 insertions, 0 deletions
diff --git a/arch/mips/pnx8550/common/setup.c b/arch/mips/pnx8550/common/setup.c
new file mode 100644
index 000000000000..64246c9c875c
--- /dev/null
+++ b/arch/mips/pnx8550/common/setup.c
@@ -0,0 +1,145 @@
+/*
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ * Based on Per Hallsmark, per.hallsmark@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/serial_pnx8xxx.h>
+#include <linux/pm.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/time.h>
+
+#include <glb.h>
+#include <int.h>
+#include <pci.h>
+#include <uart.h>
+#include <nand.h>
+
+extern void __init board_setup(void);
+extern void pnx8550_machine_restart(char *);
+extern void pnx8550_machine_halt(void);
+extern void pnx8550_machine_power_off(void);
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+extern char *prom_getcmdline(void);
+
+struct resource standard_io_resources[] = {
+ {
+ .start = 0x00,
+ .end = 0x1f,
+ .name = "dma1",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x40,
+ .end = 0x5f,
+ .name = "timer",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x80,
+ .end = 0x8f,
+ .name = "dma page reg",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0xc0,
+ .end = 0xdf,
+ .name = "dma2",
+ .flags = IORESOURCE_BUSY
+ },
+};
+
+#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
+
+extern struct resource pci_io_resource;
+extern struct resource pci_mem_resource;
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+unsigned long get_system_mem_size(void)
+{
+ /* Read IP2031_RANK0_ADDR_LO */
+ unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+ /* Read IP2031_RANK1_ADDR_HI */
+ unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+ return dram_r1_hi - dram_r0_lo + 1;
+}
+
+int pnx8550_console_port = -1;
+
+void __init plat_mem_setup(void)
+{
+ int i;
+ char* argptr;
+
+ board_setup(); /* board specific setup */
+
+ _machine_restart = pnx8550_machine_restart;
+ _machine_halt = pnx8550_machine_halt;
+ pm_power_off = pnx8550_machine_power_off;
+
+ /* Clear the Global 2 Register, PCI Inta Output Enable Registers
+ Bit 1:Enable DAC Powerdown
+ -> 0:DACs are enabled and are working normally
+ 1:DACs are powerdown
+ Bit 0:Enable of PCI inta output
+ -> 0 = Disable PCI inta output
+ 1 = Enable PCI inta output
+ */
+ PNX8550_GLB2_ENAB_INTA_O = 0;
+
+ /* IO/MEM resources. */
+ set_io_port_base(PNX8550_PORT_BASE);
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
+ iomem_resource.start = 0;
+ iomem_resource.end = ~0;
+
+ /* Request I/O space for devices on this board */
+ for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+ request_resource(&ioport_resource, standard_io_resources + i);
+
+ /* Place the Mode Control bit for GPIO pin 16 in primary function */
+ /* Pin 16 is used by UART1, UA1_TX */
+ outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
+ (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
+ PNX8550_GPIO_MC1);
+
+ argptr = prom_getcmdline();
+ if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
+ argptr += strlen("console=ttyS");
+ pnx8550_console_port = *argptr == '0' ? 0 : 1;
+
+ /* We must initialize the UART (console) before early printk */
+ /* Set LCR to 8-bit and BAUD to 38400 (no 5) */
+ ip3106_lcr(UART_BASE, pnx8550_console_port) =
+ PNX8XXX_UART_LCR_8BIT;
+ ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
+ }
+
+ return;
+}